TY - THES A1 - Nguyen-Thanh, Nhon T1 - Isogeometric analysis based on rational splines over hierarchical T-mesh and alpha finite element method for structural analysis N2 - This thesis presents two new methods in finite elements and isogeometric analysis for structural analysis. The first method proposes an alternative alpha finite element method using triangular elements. In this method, the piecewise constant strain field of linear triangular finite element method models is enhanced by additional strain terms with an adjustable parameter a, which results in an effectively softer stiffness formulation compared to a linear triangular element. In order to avoid the transverse shear locking of Reissner-Mindlin plates analysis the alpha finite element method is coupled with a discrete shear gap technique for triangular elements to significantly improve the accuracy of the standard triangular finite elements. The basic idea behind this element formulation is to approximate displacements and rotations as in the standard finite element method, but to construct the bending, geometrical and shear strains using node-based smoothing domains. Several numerical examples are presented and show that the alpha FEM gives a good agreement compared to several other methods in the literature. Second method, isogeometric analysis based on rational splines over hierarchical T-meshes (RHT-splines) is proposed. The RHT-splines are a generalization of Non-Uniform Rational B-splines (NURBS) over hierarchical T-meshes, which is a piecewise bicubic polynomial over a hierarchical T-mesh. The RHT-splines basis functions not only inherit all the properties of NURBS such as non-negativity, local support and partition of unity but also more importantly as the capability of joining geometric objects without gaps, preserving higher order continuity everywhere and allow local refinement and adaptivity. In order to drive the adaptive refinement, an efficient recovery-based error estimator is employed. For this problem an imaginary surface is defined. The imaginary surface is basically constructed by RHT-splines basis functions which is used for approximation and interpolation functions as well as the construction of the recovered stress components. Numerical investigations prove that the proposed method is capable to obtain results with higher accuracy and convergence rate than NURBS results. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2013,4 KW - Isogeometric analysis KW - NURBS KW - FEM KW - RHT-splines KW - Isogeometric analysis KW - NURBS KW - FEM KW - RHT-splines Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131125-20781 SN - 1610-7381 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Kiendl, J. A1 - Nguyen-Xuan, Hung A1 - Wüchner, R. A1 - Bletzinger, Kai-Uwe A1 - Bazilevs, Yuri A1 - Rabczuk, Timon T1 - Rotation free isogeometric thin shell analysis using PHT-splines JF - Computer Methods in Applied Mechanics and Engineering N2 - Rotation free isogeometric thin shell analysis using PHT-splines KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2011 SP - 3410 EP - 3424 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Muthu, Jacob A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics JF - Computational Mechanics N2 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 369 EP - 385 ER - TY - JOUR A1 - Chen, Lei A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain A1 - Limbert, Georges T1 - Explicit finite deformation analysis of isogeometric membranes JF - Computer Methods in Applied Mechanics and Engineering N2 - Explicit finite deformation analysis of isogeometric membranes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 104 EP - 130 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung A1 - Bordas, Stéphane Pierre Alain T1 - An alternative alpha finite element method with stabilized discrete shear gap technique for analysis of Mindlin-Reissner plates JF - Finite Elements in Analysis & Design N2 - An alternative alpha finite element method with stabilized discrete shear gap technique for analysis of Mindlin-Reissner plates KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2011 SP - 519 EP - 535 ER - TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Thoi, T. A1 - Bordas, Stéphane Pierre Alain T1 - A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates JF - Computational Mechanics N2 - A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2010 SP - 679 EP - 701 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung A1 - Bordas, Stéphane Pierre Alain T1 - An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes JF - Journal of Computational and Applied Mathematics N2 - An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2009 SP - 2112 EP - 2135 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Xuan, Hung A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids JF - Computer Methods in Applied Mechanics and Engineering N2 - Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2011 SP - 1892 EP - 1908 ER - TY - JOUR A1 - Thai, Chien H. A1 - Nguyen-Xuan, Hung A1 - Bordas, Stéphane Pierre Alain A1 - Nguyen-Thanh, Nhon A1 - Rabczuk, Timon T1 - Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory JF - Mechanics of Advanced Materials and Structures N2 - Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 451 EP - 469 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Thai-Hoang, C. A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon T1 - A smoothed finite element method for the static and free vibration analysis of shells JF - Journal of Civil Engineering and Architecture N2 - A smoothed finite element method for the static and free vibration analysis of shells KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2010 SP - 13 EP - 25 ER -