TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg A1 - Adami, Kay T1 - Physikalisch nichtlineare Analyse von Aussteifungssystemen unter Einbeziehung von Lastfolgeeffekten N2 - Die physikalisch nichtlineare Analyse von Stahlbetontragwerken unter Berücksichtigung des Einspielverhaltens (adaptives Tragverhalten) mit Methoden der mathematischen Optimierung ist seit Jahren Gegenstand intensiver Forschungsarbeiten am Lehrstuhl Massivbau I der Bauhaus-Universität Weimar. Die dabei entwickelten Modelle und Algorithmen werden im folgenden Beitrag exemplarisch auf die Untersuchung von Aussteifungssystemen in Großtafelbauweise angewendet. Da bei diesen Gebäuden die aussteifende Konstruktion aus zusammengesetzten großformatigen Betonfertigteilen besteht, wird das Gesamttragverhalten maßgebend durch das Fugentragverhalten bestimmt. Die physikalische Nichtlinearität wird durch das Aufreißen der unbewehrten Horizontalfugen und den verschieblichen Verbund in den Vertikalfugen charakterisiert und entsprechend im Berechnungsmodell berücksichtigt. Beispielrechnungen belegen, dass für die beschriebenen Aussteifungssysteme signifikante Spannungsumlagerungen infolge des nichtlinearen Fugentragverhaltens auftreten. Weiterhin können Lastfolgeeffekte rechnerisch nachgewiesen werden. Im Gegensatz zu seismisch beanspruchten Systemen, die in kürzester Zeit wiederholt extrem beansprucht werden, ist die Eintrittswahrscheinlichkeit bemessungsrelevanter Windlasten gering. KW - Gebäude KW - Tafelbau KW - Aussteifung KW - Stahlbeton KW - Tragverhalten KW - Nichtlineares Phänomen KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3498 ER - TY - CHAP A1 - Petzold, Frank A1 - Wender, Katrin A1 - Donath, Dirk A1 - Weferling, Ulrich T1 - Das Bauwerk als Informationscontainer in den frühen Phasen der Bauaufnahme - Ausgangspunkt für die Projektentwicklung und Entwurfsformulierung N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. In dem Beitrag wird ein Konzept und prototypische Realisierung für die durchgängige Unterstützung des gesamten Bauaufnahmeprozesses für Altbausubstanz vorgestellt und diskutiert. Der Fokus liegt auf der frühe Phase in der Bauaufnahme als ein Baustein in einer gesamtheitlichen IT-gestützen Planungsumgebung eingegangen. Durch gezielte Aufnahme planungsrelevanter Parameter und Auswertung hinsichtlich Wirtschaftlichkeit und Wiederverwendbarkeit bzw. der Variantenüberprüfung von Nutungskonzepten, werden gerade in dieser Phase wesentliche Entscheidungen für eine kostengünstige Planung getroffen werden. In der Veröffentlichung wird der Fokus auf folgende Punkte gesetzt: - Strukturierung und Aufnahme der Informationen während der Erstbegehung - Skizzenhafte Abbildung als Basis für die Formulierung erster Entwurfsintensionen/ Variantenuntersuchungen - Navigations- und Informationsumgebung - gezielte Auswertungsmöglichkeiten (bspw. Wirtschaftlichkeitsberechnung, Wiederverwendung von Bauteilen, Kalkulation von Abrissmengen) KW - Gebäude KW - Bauaufnahme KW - Datenerfassung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3479 ER - TY - CHAP A1 - Baranski, Jacek A1 - Boron, Jacek T1 - Computer Modeling of the Joints for WGP Construction Systems N2 - Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used. KW - Gebäude KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2935 ER - TY - CHAP A1 - Wender, Katrin A1 - Donath, Dirk A1 - Petzold, Frank T1 - Preparation and provision of building information for planning within existing built contexts N2 - A prerequisite for planning within existing built contexts is precise information regarding the building substance, its construction and materials, possible damages and any modifications and additions that may have occurred during its lifetime. Using the information collected in a building survey the user should be able to “explore” the building in virtual form, as well as to assess the information contained with regard to a specific planning aspect. The functionality provided by an information module should cover several levels of information provision ranging from ‘simple retrieval’ of relevant information to the analysis and assessment of stored information with regard to particular question sets. Through the provision of basic functionality at an elementary level and the ability to extend this using plug-ins, the system concept of an open extendable system is upheld. Using this modular approach, different levels of information provision can be provided as required during the planning process. KW - Architektur KW - Verteiltes System KW - Gebäude KW - Nutzungsänderung KW - Altbaumodernisierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1829 ER - TY - THES A1 - Steinmann, Frank T1 - Modellbildung und computergestütztes Modellieren in frühen Phasen des architektonischen Entwurfs T1 - Generalised models and computer aided modelling in early stages of architectural design N2 - Die Arbeit befaßt sich mit der Konzeption und exemplarischen Realisierung von CAD-Tools zur Unterstützung des konzeptionellen Entwurfs von Gebäuden. Die Spezifik des Bauentwurfs macht eine Analyse des Arbeitsfelds "früher architektonischer Entwurf" aus Sicht der Informationsverarbeitung nichtig. Auf der Grundlage einer Untersuchung des Entwurfsprozesses aus pragmatischer und kognitiver Sicht wird ein generisches Prozeßmodell "Entwurf" abgeleitet und mit Beispielen belegt. Ausgehend von der Auffassung, daß Entwerfen der Prozesse das Vorausdenken von Bauwerken in Modellen ist, wird die "objektorientierte Modellierungstechnologie" einer eingehenden Bewertung unterzogen. Ihre methodische Eignung zur modellhaften Abbildung von Bauwerken wird grundsätzlich nachgewiesen. Mit Blick auf die spezifischen Gegebenheiten der frühen Entwurfsphasen, wie Unschärfe und nicht formalisiert darstellbarer Informationen, werden einige Erweiterungen vorgeschlagen und experimentiert. Ziel der Arbeit ist es, ein multipel und über lange Zeiträume auswertbares Bauwerksmodell zu schaffen, um Planungsprozesse über den gesamten Bauwerkslebenszyklus durchgängig zu unterstützen. Grundlage des Entwerfens mittels der objektorientierten Methodik sind generalisierte Domänenmodelle. Es wird gezeigt, daß für eine Interpretation konkreter Bauwerksmodelle die generalisierten Domänenmodelle entweder zu normieren sind oder aber daß sie explizit verfügbar sein müssen. Die Objektorientierung bietet die Möglichkeit, sowohl konkrete als auch generalisierte Modelle in einem einheitlichen Metamodell zu beschreiben... N2 - The doctoral thesis deals with the conception for CAD-Tools especially for the early phases of architectural design. Some prototypical implementations make the concept clear. Buildings are a special matter for design activities. That is the reason why an analysis is necessary especially for the early design stages. The objective of that analysis is that CAD-tools for this design stage can be implemented. The topic "design" has two aspects: the design process and the object models. An examination of the design process is the basis for the suggested "generic design Process model". The starting point for the examination is the pragmatic process model on the one hand and the cognitive process model on the other hand. The "generic process model" consists of "atomic design activities" which are illustrated by examples. Starting with the thesis architectural design is a process to plan a building in advance with help of models, the object oriented modelling technology is thoroughly evaluated. The suitability of the method is generally proofed for the representation of buildings by analogical models. Models in early phases of architectural design have some special features like fuzziness, abstraction and unformaliseable information. As regards these special features, some extensions of the modelling method are suggested and experimentally evaluated. The objective of this work is to support planning and management processes during the whole building life cycle. Therefore the models have to be structured in a way that it becomes possible to interpret and evaluate building models during this long period. Generalised domain models are the basis for a design with the help of the object oriented design method. For an interpretation of a model for an existing or virtual building it is necessary either to standardise the domain model or to provide an explicit, accessible domain model. The object oriented paradigm provides the possibility to describe both generalised models (knowledge) and their instanciation (concrete building models)... KW - Bauentwurf KW - Gebäude KW - CAD KW - Computer science KW - Architecture KW - CAD-Systems KW - Computer aided architectural design KW - Functional design Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040220-437 ER - TY - CHAP A1 - Hovestadt, Ludger T1 - Industrielle Vorfertigung individuell geplanter Gebäude N2 - Es liegt keine inhaltliche Zusammenfassung vor. KW - Gebäude KW - Vorfertigung KW - Bauplanung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-173 ER - TY - CHAP A1 - Weitzmann, Rüdiger T1 - Limit state design of hybrid structures with meshless methods using mathematical optimization N2 - The revitalization of existing structures belongs to the frequently tasks in urban reconstruction processes. The adaptation for new requirements will commonly affect substantial changes in the general configuration of structures. The resulting revitalized structures are characterized by a hybrid design, where old and new, identical or diverse materials and members will be coupled in different ways. In the planning stage the treatment of these systems leads to application of complex and hybrid mechanical models respectively. High performance numerical instruments have to be applied for solving not only analysis but also targeted design problems. Because of the hybrid character of mechanical models in revitalization planning processes the use of hybrid technologies is advantageous. In this paper mixed domain technique will be used for connecting EFG and FE. The models derived will be adopted for design purposes of non-linear loaded hybrid structures. The investigations show a good adaptability of the meshless methods to the design of hybrid structures by using optimization strategies. With this method the advantages of both finite element and meshless methods can be utilized most suitable. With the property of a minimum amount of unknowns by maintaining an adequate quality of the results the application of mixed finite element and meshless methods is a promising alternative to traditional methods in structural analysis and optimization. KW - Gebäude KW - Rekonstruktion KW - Baustatik KW - Nichtlinearität KW - Optimierung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-67 ER -