TY  - CHAP
A1  - Christov, Christo T.
A1  - Petkov, Zdravko B.
T1  - DETERMINATION OF THE DYNAMIC STRESS INTENSITY FACTOR USING ADVANCED ENERGY RELEASE EVALUATION
N2  - In this study a simple effective procedure practically based upon the FEM for determination of the dynamic stress intensity factor (DSIF) depending on the input frequency and using an advanced strain energy release evaluation by the simultaneous release of a set of fictitious nodal spring links near the crack tip is developed and applied. The DSIF is expressed in terms of the released energy per unit crack length. The formulations of the linear fracture mechanics are accepted. This technique is theoretically based upon the eigenvalue problem for assessment of the spring stiffnesses and on the modal decomposition of the crack shape. The inertial effects are included into the released energy. A linear elastic material, time-dependent loading of sine type and steady state response of the structure are assumed. The procedure allows the opening, sliding and mixed modes of the structure fracture to be studied. This rational and powerful technique requires a mesh refinement near the crack tip. A numerical test example of a square notched steel plate under tension is given. Opening mode of fracture is studied only. The DSIF is calculated using a coarse mesh and a single node release for the released energy computation as well a fine mesh and simultaneous release of four links for more accurate values. The results are analyzed. Comparisons with the known exact results from a static loading are presented. Conclusions are derived. The values of the DSIF are significantly larger than the values of the corresponding static SIF. Significant peaks of the DSIF are observed near the natural frequences. This approach is general, practicable, reliable and versatile.
KW  - Bruchmechanik
KW  - Dynamische Belastung
KW  - Spannungsintensitätsfaktor
KW  - Eigenwertproblem
Y1  - 2000
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5770
ER  - 
TY  - CHAP
A1  - Petkov, Zdravko B.
A1  - Christov, Christo T.
T1  - Response Spectra Evaluation Including Pounding Effect
N2  - Most of the existing seismic resistant design codes are based on the response spectrum theory. The influence of inelastic deformations can be evaluated by considering inelastic type of resisting force and then the inelastic spectrum is considerably different from the elastic one. Also, the influence of stiffness degradation and strength deterioration can be accounted for by including more precise models from material point of view. In some recent papers the corresponding changes in response spectra due to the P- Ä effect are discussed. The experience accumulated from the recent earthquakes indicates that structural pounding may considerably influence the response of structures and should be taken into account in design procedures. The most convenient way to do that is to predict the influence of the pounding on the response spectra for accelerations, velocities and displacements. Generally speaking the contact problems such as pounding are characterized by large extent of nonlinearity and slow convergence of the computational procedures. Thus obtaining spectra where the contact problem is accounted for seems very attractive from engineering point of view because could easy be implemented into the design procedures. However it is worth nothing that there is not rigorous mathematical proof that the original system can be decomposed into single equations related to single degree of freedom systems. It is the porpose of the paper to study the influence of the pounding on the response spectra and to evaluate the amplification due to the impact. For this purpose two adjacent SDOF systems are considered that are able to interact during the vibration process. This problem is solved versus the elastic stiffness ratio, which appears to be very important for such assemblage. The contact between masses is numerically simulated using opening gap elements as links. Comparisons between calculated response spectra and linear response spectra are made in order to derive analytical relationships to simply obtain the contribution of pounding. The results are graphically illustrated in response spectra format and the influence of the stiffness ratio is clarified.
KW  - Bauwerk
KW  - Erdbebenbelastung
KW  - Stochastischer Prozess
Y1  - 2003
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3464
ER  -