TY - THES A1 - Korkmaz, Sinan T1 - Extension of the Uniform Material Law for High Strength Steels N2 - Uniform Material Law (UML) is a handy and user-friendly method since only the tensile strength data of the material is needed for estimation of the strain-life curve, in contrast to other methods, such as four-point correlation method, universal slopes method, Mitchell's method, modified universal slopes method, which also require the data of the reduction in area or the fracture ductility of the material. On the other hand, the error level of UML estimations can be still decreased by refining the method. The objective of this thesis is putting forward a more refined method by extending conventional UML. Furthermore, a life prediction computation is carried out with the proposed extended UML and the results are compared to that of the conventional method. The results have proven that the maximum error is dropped down to 0.59% from 38% with the proposed extended UML method. KW - Materialermüdung KW - UML KW - Werkstoffermüdung KW - hochfester Stahl KW - Lebensdauervorhersage KW - material fatigue KW - uniform material law KW - UML KW - high strength steel KW - fatigue life prediction Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20090602-14718 ER - TY - THES A1 - Rauch, Kristin T1 - Simulation - Termincontrolling beim Bau einer Brückenkappe T1 - Simulation - critical path monitoring for the construction of a bridge curb N2 - Die Simulation ist vor allem in der Forschung und Wissenschaft ein bekanntes Ver-fahren zur Untersuchung von dynamischen Prozessen. Fachgebiete wie u.a. die Medizin und Biologie, das Verkehrswesen, die Automobilindustrie, die Meteorologie und die Fertigungstechnik gewinnen neue Erkenntnisse aus dem Einsatz derartiger Analyseverfahren. Gründe für die Anwendung von Computersimulationen erstrecken sich von finanziellen und zeitlichen Aspekten über eine Risikoverringerung bis hin zu einer vereinfachten Vorgehensweise. Nicht in allen Bereichen aber werden die viel-seitigen Vorteile von Simulationsmethoden genutzt. In der Baubranche wird Simulation derzeit nur ansatzweise eingesetzt. Doch vor al-lem Baustellen bieten durch den zunehmenden Kosten- und Termindruck sowie viel-seitige andere Einflüsse eine gute Basis für die Anwendung von Simulationsmetho-den. Der Bauablauf kann dadurch besser kontrolliert und gesteuert werden. In der Planungsphase von Bauprojekten wird Simulation bereits in Grundzügen für die Op-timierung von Bauablauf- und Logistikprozessen genutzt. Allerdings ist besonders die Ausführungsphase durch Störungen und Änderungen geprägt, sodass hier Simu-lationsmethoden noch effektiver eingesetzt werden können. Im Rahmen dieser Arbeit sollen die Einsatzmöglichkeiten von Simulationsmethoden für die Optimierung des Termincontrollings untersucht werden. Durch das Aufzeigen verschiedener Methoden sowie einem Vergleich über ihre Vor- und Nachteile wird herausgefiltert, welches Simulationswerkzeug am effektivsten im Termincontrolling eingesetzt werden kann. Ein weiteres Ziel dieser Arbeit ist die Modellierung eines Beispielprozesses anhand eines ausgewählten Simulationsverfahrens. Die Herstellung einer Brückenkappe wird in diesem Zusammenhang umfangreich dargestellt und analysiert. Eventuelle Zwangspunkte bei der Umsetzung und verschiedene Lösungsmöglichkeiten werden aufgezeigt. N2 - Simulation as supporting method to analyse difficult processes is already successful implemented in different domains, but it is also increasingly used in the construction industry. Above all infrastructure construction sites are characterised by enormous pressure of time and costs. For solving these problems and controlling the construction progress, simulation tools can be used more intensively. Up to now these tools are applied only in the start-up phase of a project for the optimisation of construction and logistic processes. But especially the construction phase is characterised by disturbances and changes. The topic of this master thesis “Simulation – critical path monitoring for the construction of a bridge curb” deals with developments to optimise the controlling of the construction progress by using simulation. At first different modelling methods are showed and analysed, how they can be used to simulate construction processes. Then a detailed investigation of the building of a bridge curb follows. Subsequent this construction progress is simulated with the computer program “Plant Simulation”. Finally limits of simulation tools are analysed and future lines of development are demonstrated. KW - Simulation KW - Termincontrolling KW - Bauablauf KW - Prozessoptimierung KW - Brückenkappe KW - simulation KW - critical path monitoring KW - construction progress KW - process optimisation KW - bridge curb Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081111-14414 ER - TY - THES A1 - Abebe, Beka Hailu T1 - Fatigue Life Assessment of Diesel Engine Pump Part N2 - The intention of this thesis is first, to determine material constants of ductile cast irons (EN-GJS-400-15,EN-GJS-500-7, EN-GJS-600-3) for estimating fatigue damage. These constants are obtained from experimental results. These results are stress versus strain tests, strain versus crack initiation life tests,and consequently, Smith, Watson and Topper damage parameter, PSWT can be calculated. Using data fitting, the constants can be estimated, thus Uniform Material Law for ductile cast irons is fulfilled. Endurance limit stress is obtained based on research report termed Synthetic Wöhler Lines(SWL).It is found out that the endurance limit stress is a function of yield limit stress. Endurance life cycle is set as three millions for the three materials. Secondly, fatigue life assessment is done for diesel engine pump part made of the three ductile cast irons. Finite element calculation is done to get elastic stress concentration factor, Kt, and plastic notch factor Kp. Neuber ´s rule is used to determine local stress at notch subjected to constant amplitude load test and variable amplitude loading. The constant amplitude loading is conducted at a stress ratio of R=0 on the pump part. The test results show that fatigue life assessment based on the material constants is accurate. On the basis of the accuracy of constant amplitude test results, it is possible to determine for fatigue life for variable amplitude loading which is the real loading on the pump part. The variable amplitude loading is normally standardized for computational efficiency. This standardized loading is termed as CORAL (COmmon RAil Loading) sequence. CORAL is used to calculate fatigue life of pump part and is inputted to a Fatigue Life Evaluation computer program. This program uses rain flow cycle counting method. It can be concluded that the material constants for ductile cast irons fit well which is proved by experimental tests by constant amplitude loading on pump part. Then life prediction can be done for the typical pump loading, standardized variable amplitude loading known as CORAL KW - Materialermüdung KW - Fatigue KW - CORAL KW - ductile cast iron KW - diesel engine pump part Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081027-14331 ER - TY - THES A1 - Jacobs, Dietlind T1 - Experimentelle Ermittlung der Filtercharakteristik eines nichtbindigen Bodens und Vergleich mit analytischen Ansätzen T1 - Experimental inquiry of the filter characteristic of a non-cohesive ground and comparison with analytic attempts N2 - Aus den beidseitigen Wassereinstau von Flussdeichen, resultieren neue Belastungssituationen innerhalb eines Flussdeiches. Die neu eintretenden Wechselwirkungen von Erdstoffschichten mit der Sickerströmung können an der Grenzschicht von einer bindigen zu einer nichtbindigen Erdstoffschicht zum Materialtransport führen. Der Austrag von Feinmaterial aus der Dichtungsschicht (Basisschicht) kann mit Erdstofffiltern (Filterschicht) bestimmter Kornzusammensetzung verhindert werden. Bei diesem Vorgang wird das feine Material bei Durchströmung der Filterschicht an der Oberfläche bzw. im Inneren einer Filterschicht abgetrennt bzw. am Transportvorgang zurückgehalten. In dieser Forschungsarbeit wurden durch Versuche die Ansätze zur geometrische Stabilität herausgearbeitet. Die Auswertung der Versuchsergebnisse bezog sich auf die initiale Wasserdurchlässigkeit, auf die Filtercharakteristik sowie die Wasserdurchlässigkeit bei Suspensionsströmung und die Betrachtung der geometrischen Stabilität des Systems aus Suspension und Filter. N2 - By the on both sides dam in river dykes, result new load situations within a river dyke. The newly incoming interaction of earth material layers with the seeping current can lead in the border layer from cohesive to a non-cohesive earth material layer to the material transport. The decision of fine material from the poetry layer (base layer) can be prevented with earth material filters (filter layer) of certain grain composition. With this process the fine material is separated by the filter layer in the surface or inside a filter layer or is held back in the transport process. In this research project the attempts were worked out by attempts to of the geometrical stability. The evaluation of the test results referred to the initial water permeability, to the filtration process as well as the water permeability with suspension current and the consideration of the geometrical stability of the system from suspension and filter. KW - Erosion KW - Erosion KW - Erdstofffilter KW - Suspension KW - Deich KW - erosion KW - filterprocess KW - suspension KW - dyke Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080922-14248 ER -