TY - THES A1 - Ötsch, Silke T1 - Überwältigen und schmeicheln. Der physiologische, symbolische und ganzheitliche Körper in der Architektur. T1 - Distraction and Pamper. The Physiological, Symbolical and Integrated Body in Architecture. N2 - Der menschliche Körper ist Bezugspunkt von repräsentativen Strömungen der zeitgenössischen Architektur, so lautet die Hauptthese der Dissertation. Bislang wurde das zeitgenössische architekturimmanente Konzept des Körpers größtenteils selektiv und anhand wenig repräsentativer Beispiele von der Kritik behandelt: Ein auf physiologische Gesichtspunkte reduzierter Körper interagiert mit Bauten der klassischen Moderne oder neuen Medientechnologien. Eine umfassende Beschäftigung mit theoretischen Konzepten des Körpers und mit dem Fallbeispiel der zeitgenössischen Hotel- und Kasinoarchitektur in Las Vegas zeigt, dass der Begriff des Körpers komplexer geworden ist, womit der Bezug zum Körper weniger augenfällig erscheint. Der Ansatz der Phänomenologie, Erklärungsmuster durch eine Hinwendung zum Körper zu erhalten wird von verschiedenen Autoren in Frage gestellt. Wenn die Grenzen von Körper bzw. Leib und Umwelt nicht mehr zu bestimmen sind, tauge der Begriff nicht als Letztbegründung. Diese Kritik kann entkräftet werden, wenn auf das Modell der animate form der Philosophin Sheets-Johnstone zurückgegriffen wird. Dieses Konzept führt über Merleau-Pontys Körperbegriff hinaus, der Sheets-Johnstones Aussage nach abstrakt sei. Insbesondere eine Hinwendung zum taktil-kinästhetischen Körper liefert neue Perspektiven. Damit ist es sinnvoll, Architektur in ihrer Beziehung zum Körper zu beurteilen, weil der Körper definierbar und eingrenzbar ist. Anhand des Fallbeispiels der Hotel- und Kasinoarchitektur von Las Vegas kann aufzeigt werden, in welcher Weise sich Planer heute auf den Körper beziehen. Architektur geht in einem Megamedium auf, umgesetzt mit unterschiedlichen Techniken der Umweltgestaltung. Sowohl die Quantität als auch die Qualität der eingesetzten Reize nimmt zu. Dabei werden vor allem Reize eingesetzt, die tendenziell unbewusst wahrgenommen werden. Neben der Abstimmung auf die Sinne und die physische Beschaffenheit wird die symbolische Prägung des Körpers beachtet. Wünsche und Vorstellungen der Nutzer werden über Zielgruppenanalysen ermittelt und finden ihre Entsprechung in semiotischen Architekturelementen. Diese werden so gestaltet, dass der Nutzer den semiotischen Gehalt zugleich sinnlich erfährt. Dieses Konzept des Körpers wird als ganzheitlicher Körper bezeichnet. Aufschlussreich ist ein Vergleich mit Vorstellungen des Körpers vorausgehender Phasen, so z.B. dem Modell, das sich aus Scott Brown, Venturi und Izenours Buch Learning from Las Vegas ableiten lässt, und das sich ebenso aus Texten und Bauten von Zeitgenossen wie Lynch, Norberg-Schulz und Kahn herausarbeiten lässt. Über die Beschäftigung der Architekturtheoretiker mit der Sinneswahrnehmung entsteht ein Bewusstsein für den Einfluss des Symbolischen, das eine subjektive, durch das soziale und kulturelle Umfeld geprägte Wahrnehmung hervorbringt. Der Körper ist eingebettet in symbolische Systeme wie Konventionen und Traditionen, die sein Handeln bestimmen. Dahingegen beziehen sich Vertreter der klassischen Moderne hauptsächlich auf die physiologischen Eigenschaften des Körpers, seine Abmessungen und Bewegungsabläufe, wie Texte, Bauten und Menschmodelle z.B. von Meyer, Neutra, Le Corbusier und Neufert zeigen. Es fällt auf, dass in Texten über Architektur von Las Vegas häufig Begriffe vorkommen, die zugleich zentrale Termini der Phänomenologie sind, wie Atmosphäre und der englische Begriff experience. Es zeigt sich, dass sich die Bedeutungen der philosophischen Termini in der Architektur des Fallbeispiel widerspiegelt. Anders als die vorschnelle Etikettierung der Architekturströmung als „Erlebnisarchitektur“ suggeriert, bezieht sich der Begriff experience auf eine Ausrichtung an der Erfahrung. Diese ist das Resultat der langfristigen Prägung einer konkreten Nutzergruppe durch den in der Umwelt agierenden und durch seine symbolische Prägung beeinflussten Körper. Die Erfahrung impliziert das Erlebnis, als kurzfristige Interaktion von Körper und Umwelt. Am Fallbeispiel kann außerdem gezeigt werden, dass Techniken zur Schaffung von Atmosphären eingesetzt werden. In Anlehnung an den Philosophen Böhme kennzeichnen sich Atmosphären durch eine besondere Nähe von Architektur und Körper. Die Tatsache, dass Architekten gezielt Atmosphären schaffen, die gemeinhin nicht der Strömung der „Erlebnisarchitekur zugerechnet werden, weist darauf hin, dass sich das Leitbild des ganzheitlichen Körpers in unterschiedlichen Kontexten findet. Im Gegensatz zu Thesen Eisenmans oder Jamesons, die eine Entfremdung von Körper und Raum bzw. das Ende des anthropozentrischen Weltbilds feststellen, propagieren Planer wie Jerde die Herstellung von Architektur, die Nutzer und Umwelt in einer übergeordneten Ganzheit vereint. Ganzheit kann aber trotz feinerer Abstimmung auf den Körper nur grenzwertig erreicht werden, da Nutzer nicht vollständig erfasst werden können, sich die Planungen auf bestimmte Zielgruppen beschränken und die Interessen von Planer und Nutzer verschieden sind. N2 - As the main assumption of this thesis says, the human body is an important reference of contemporary architecture. Usually the relation of the human body and architecture is discussed by focussing on a body restricted on its physiological properties interacting with modern architecture or new media technology. The examination of theoretical concepts of the human body accompanied by the case study of the contemporary architecture of Las Vegas shows, that the concept of the body has undergone a change of meaning. Following the thesis, many contemporary planners use the concept of the integrated body. The phenomenological approach which consists in finding explanations by focussing on the human body and its perception is contested by different author because of the impossibility to define the boundaries between the human body and its environment. Consequently the body would not serve as a reference. This objection is invalidate if one considers the concept of animate form of the philosopher Sheets-Johnstone. This concept goes beyond the different notions of the body which Merleau-Ponty proposes as Eigenleib or Fleisch. Especially the focus on the tactile-kinaesthetic body opens up new perspectives. Thence, as the human body can be defined and qualified this reference makes sense. The way in which planners draw attention to the human body is explained by considering the case study of recently built resort architecture in Las Vegas. Architecture forms a part of a megamedium generated by different disciplines of environmental design. Both the quantity and the quality of the stimulus used increase. Planners mainly use stimulus which the user perceives unconsciously. Besides the sensual perception, symbolic qualities are taken into account. The wishes and ideas of a specific target group are determined and converted to architectural elements. These semiotic elements are designed in a way the user can experience the meaning sensuously. This concept of the body is denominated the integrated body. As the comparison with the notion of the body in Scott Brown, Venturi and Izenours book Learning from Las Vegas and in texts and buildings of the author’s contemporaries as Lynch, Norberg-Schulz and Kahn shows, the concept of the body has changed. By concentrating on the bodily perception architects and theoreticians become aware of the influence of the symbolic. The body is imbedded in a system of conventions and traditions affecting its actions. Unlike this, architects of the modern movement mainly refer to the physiological properties of the body, to its size and mechanical properties, as examples of texts, buildings and man models of Meyer, Neutra, Le Corbusier and Neufert show. It is noticeable that journalists often employ terms to describe Las Vegas’ architecture which are usually used in the phenomenological discourse as experience and atmosphere. It can be shown that the meaning of the philosophical notion are reflected in the architecture. As to architecture, experience does not only stands for “Erlebnisarchitektur” (which means architecture of the event) but relates to the long term influence the target group’s user has succeeded by interacting with the physical and symbolic environment. The architectural case study also shows, that planners employ techniques to generate atmospheres. Following the philosopher Böhme atmospheres are situated between the subject and the object and by appealing the senses. Thus the body is very close to architecture. The fact that different architectural movements use techniques to generate atmospheres shows, that the idea of the integrated body can be found in different contexts. The user’s reactions make clear that atmospheric spaces effect people. That is why those spaces are used for political economical aims. The use of the spatial effects does not depend solely on design questions but is directly linked to the political and economical situation. KW - Körper KW - Merleau-Ponty KW - Maurice / Phénoménologie de la perception KW - Phänomenologie KW - Taylorismus KW - Las Vegas KW - Venturi KW - Scott Brown and Partner KW - Hotel- und Kasinoarchitektur KW - Body KW - Phenomenology KW - Las Vegas (Nev.) KW - Architecture Theory KW - Jerde Partnership International Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050727-6926 ER - TY - THES A1 - Lehmkuhl, Hansjörg T1 - Zur praktischen Anwendung numerischer Analysemethoden für Stabilitätsprobleme T1 - The application of numerical methods to stability problems in practice N2 - In der täglichen Ingenieurpraxis werden in zunehmenden Maße numerische Analysen im Rahmen der Finite-Elemente-Methode auch zur Untersuchung stabilitätsgefährdeter Strukturen eingesetzt. Für die aktuelle Praxis, insbesondere im konstruktiven Stahlbau, ist jedoch festzustellen, dass zwischen der fortgeschrittenen Theorie und dem Niveau der praktischen Anwendung numerischer Stabilitätsanalysen eine große Kluft besteht. Aus praktischer Sicht erscheint es unumgänglich, die weiter wachsende Diskrepanz zwischen den umfangreichen theoretischen Möglichkeiten und der gegenwärtigen Praxis abzubauen. Damit steht der praktisch tätige Ingenieur vor der Aufgabe, sein Wissen auf dem Gebiet numerischer Stabilitätsanalysen zu vertiefen und bereits vorhandene FE-Programme um Berechnungsalgorithmen für umfassende numerische Stabilitätsanalysen zu erweitern. Dafür werden in der Arbeit die Grundlagen einer FEM- orientierten modernen Stabilitätstheorie einheitlich und aus Sicht einer praktischen Anwendung aufbereitet. Die Darstellung von realisierten programmtechnischen Umsetzungen für erweiterte Analysenmethoden wie Nachbeulanalysen, Pfadwechsel und Approximationen imperfekter Pfade ermöglicht eine Erweiterung des Methodenvorrates. Die innerhalb der Arbeit untersuchten Beispiele zeigen, dass durch die Anwendung der behandelten Verfahren das Tragverhalten einer stabilitätsgefährdeten Struktur wesentlich besser eingeschätzt werden kann als bei Beschränkung auf die herkömmlichen Analysemethoden. N2 - The daily engineering practice is characterized by an increasing use of numerical analyses also for structures influenced by stability problems. However it must be noticed that in practice, especially in steel construction, exists a large gap between the advanced stability theory and the level of practical applications of numerical stability analyses. From a practical point of view it seems be absolutely necessary to break up the continual growing discrepancy between comprehensive theoretical possibilities and current practice. Therefore practical engineers have to deepen their knowledge on the field of numerical stability analyses and have to expand existing finite element programs with special algorithms. For this purpose basics of a finite element orientated modern stability theory are presented from the view of practical application. Furthermore steps are shown for programming special methods like post-buckling analyses, path switching and approximations for load-deformation pathes including imperfections. The importance of the additional methods for a better understanding of the structures stability behaviour clearly comes out by the presentation of different examples of practical relevance. KW - Nichtlineare Stabilitätstheorie KW - Finite-Elemente-Methode KW - Stabilität KW - Stahlbau KW - Imperfektion KW - Nachbeulverhalten KW - Schale KW - Non-linear buckling KW - Finite Element Method KW - stability theory KW - post-buckling analysis KW - koiter approximation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20051013-7102 ER - TY - THES A1 - Rickert, Jörg T1 - Zum Einfluss von Langzeitverzögerern auf der Basis von Phosphonsäure auf die Hydratation einzelner Klinkerphasen, Portlandzementklinker und Portlandzemente T1 - About the influence of long-term retarders on the basis of phosphonic acid on the hydration of several clinker phases, portland cement clinkers and portland cements N2 - Neben dem Schwerpunkt der Verflüssigung werden auch Zusatzmittel benötigt, die extrem lange Verarbeitbarkeitszeiten des Betons ermöglichen. Eine neue Wirkungsgruppe, durch die Verarbeitbarkeitszeiten von über 90 Stunden er-reicht werden können, sind Langzeitverzögerer (LVZ) auf der Basis von Phosphonsäure. In systematischen Versuchen wurden grundlegende Erkenntnisse über die Wirkungsmechanismen von LVZ auf die Hydratation gewonnen. Es hat sich gezeigt, dass die verzögernde Wirkung von LVZ auf die Bildung von schwer löslichem Calciumphosphonat zurückzuführen ist, welches die Partikeloberflächen žabdichtetœ. Vom Angebot an gelöstem Calcium hängt es ab, ob sich das žabdichtendeœ Calciumphosphonat direkt bildet oder ob durch den Calciumanspruch des LVZ eine kurzzeitig verstärkte Hydratation reaktiver Klin-kerphasen hervorgerufen wird. Sulfatoptimierte Zemente wiesen aufgrund der Anteile an Sulfatträger genüge! nd Calcium-Ionen für eine sofortige Bildung von Calciumphosphonat auf. In Verbindung mit der Bildung von primärem Ettringit bildet die Sulfatträgeroptimierung die Grundlage für die erwünschte Wirkungsweise des Zusatzmittels. N2 - In addition to the large group of plasticizing admixtures, such kind of admixtures are required which enable a very long time of workability of concrete. The workability of concrete over a period of more than 90 hours can be achieved by long-term retarders. This new type of admixture is based on phosphonic acid. By systematic investigations profound knowledge about the operative mechanisms of long-term retarders could be drawn. The retarding action is due to a formation of sparingly soluble calcium phosphonate which žseal upœ the particle surface. Whether the addition of long-term retarder leads to an immediate formation of calcium phosphonate or to a short termed acceleration of the hydration of reactive clinker phases depends on the supply of solved calcium. Because of the adjusted calcium sulphate content in cement the concentration of calcium is high enough for an immediate formation of sparingly soluble calcium! phosphonate. In combination with the formation of primary ettringite the calcium sulphate agent is the basis for the desired mode of action of the long-term retarder. KW - Beton KW - Recycling KW - Hydratation KW - Klinker KW - Betonzusatzmittel KW - Betonzusatzmittel KW - Langzeitverzögerer KW - Phosphonocarbonsäure (PBTC) KW - Wirkungsmechanismen KW - Zement KW - concrete admixture KW - long-term retarder KW - phosphonocarbon acid (PBTC) KW - operative mechanisms KW - cement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040211-232 ER - TY - CHAP A1 - Kang, Julian A1 - Lho, Byeong-Cheol A1 - Kim, Jeong-Hoon T1 - XML-based Vector Graphics: Application for Web-based Design Automation N2 - Most retaining walls and box culverts built for arterial road construction are simple, and the design process of these structures is often repetitive and labor-intensive because they are so similar in structural configuration. Although some integrated design automation systems developed for retaining walls and box culverts have expedited the design process of these structures, the process of collecting and distributing the resultant engineering documents has not been fully integrated with the computer applications. We have been developing a Web-based design automation system to manage the resultant documents as well as to speed up the repetitive design process. Manipulation of engineering drawings in the Web page is one of the critical functions needed for Web-based design automation. eXtensible Markup Language (XML) and XML-based vector graphics are expected to facilitate the representation of engineering drawings in the Web page. In this paper, we present how we used XML and Scalable Vector Graphics (SVG) to compose engineering drawings and represent them in the Web page. XML Data Island we designed to define drawing components turned out effective in manipulating the engineering drawings in the Web page. KW - Architektur KW - Verteiltes System KW - XML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1872 ER - TY - JOUR A1 - Cerovsek, Tomo A1 - Turk, Ziga T1 - Working Together: ICT Infrastructures to Support Collaboration N2 - The paper summarizes a part of research carried out in ICCI project and provides a current review of ICT infrastructures supporting collaboration. It covers taxonomies, protocols, standards, components, typical subsystems as well as future trends and recommendation for two most important technologies with applications in AEC: (1) EIP (Enterprise information portal) – a single gateway to a company's information, knowledge base, and applications for all actors; (2) RTC (Real-Time Communication and Collaboration technologies) that provide means for asynchronous communication between geographically dislocated people using ICT. Proposed future developments are: orientation towards web services - with building information models, business intelligence, personalization, AEC information retrieval, p2p workspaces and grids. KW - Informationstechnik KW - Forschung KW - Europa KW - Teamwork Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2055 ER - TY - THES A1 - Lehmer, Babett T1 - Wechselwirkung zwischen Baugrundmodell und Gründungsentwurf am Beispiel eines Maschinenfundaments N2 - Die Beschreibung und Modellierung des Baugrundes erweist sich aufgrund seiner Genese als schwierig. Diese Tatsache soll am Beispiel eines Gründungsentwurfs, durch die Gegenüberstellung zweier unterschiedlicher Modellansätze demonstriert werden. In diese Betrachtung gehen zum einen "Subjektive Schätzungen" und zum anderen "[Geo]Statistische Baugrundmodelle" ein. Die Bemessung erfolgt anhand einer identischen Ausgangsdatenbasis. Im Ergebnis zeigen sich große Abweichungen zwischen beiden Modellansätzen, die sich auf unterschiedlichen Umgang mit den streuenden Baugrundkenngrößen zurückführen lassen. Die streuenden Baugrundkenngrößen werden bei den "Subjektiven Schätzungen" durch einen einzigen, ungünstig wirkenden Kennwert repräsentiert, der die Eigenschaften eines Homogenbereichs beschreibt. Bei den "[Geo]Statistischen Baugrundmodellen" werden die Baugrundkenngrößen in ihrer Streubreite erfasst, ausgewertet und mit der Monte-Carlo-Simulation in der Grenzzustandsfunktion berücksichtigt. KW - Baugrundmodell KW - Geotechnik KW - Baugrundmodell KW - Geostatistische Interpulation KW - Ordinary Kriging KW - Universal Kriging KW - Anisotropie KW - Subsoil-model KW - geostatistical methods KW - local drift KW - local trend KW - viariographie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5636 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - CHAP A1 - Molkenthin, Frank T1 - Web-based Information Systems: Data Monitoring, Analysis and Reporting for Measurements and Simulations N2 - This paper describes the concept, implementation and application of the Web-based Information System ‘Turtle’ for data monitoring, analysis, reporting and management in engineering projects. The system uses a generalised object-oriented approach for information modelling of physical state variables from measurements and simulations by sets of tensor objects and is implemented platform-independently as a Web application. This leads to a more flexible handling of measurement and simulation information in distributed and interdisciplinary engineering projects based on the concept of information sharing. The potential and advantages of Web-based information systems like ‘Turtle’ are described for one selected application example: a measurement programme dealing with the physical limnology of Lake Constance. KW - Mobile Computing KW - Funknetz KW - Informationssystem KW - World Wide Web Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1184 ER - TY - CHAP A1 - Molkenthin, Frank T1 - Web-based Collaborative Engineering based on Information Sharing - HydroWeb: An Education Experiment in the Internet N2 - This paper describes the concept and experiences of the international Open Distance Learning Course ‘HydroWeb’. This course deals with the introduction of Web-based Collaborative Engineering in standard education programmes of water related engineering and civil engineering based on information sharing. Organized under the umbrella of IAHR and ETNET21 this course is collaboration from several universities from all over the world. Started in 1999 the course demonstrates the potential and innovative opportunities of Web-Technology in education, research and engineering: Students from the different partner universities form small distributed teams to solve a given engineering problem in a time window of two weeks. To overcome the spatial distribution the students apply modern Web technology such as video conferencing, application sharing and document management. All results as well as the final reports are presented as Web document on a shared Web-based project platform (http://www.hydro-web.org). Besides the experiences to apply standard Web tools and working methods based on information sharing instead the conventional information exchange in the daily engineering work the students improve their soft skills operate successfully in international and interdisciplinary project environments as part of the ‘Technical Culture’ of nowadays. KW - Architektur KW - Verteiltes System KW - Informationsaustausch KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1869 ER - TY - CHAP A1 - Portz, Norbert T1 - Was muss eine öffentliche Ausschreibung leisten? N2 - Voraussetzungen einer ordnungsgemäßen Ausschreibung, Beachtung des Vergaberechtssystems, Vergaberecht bei Privatisierungen, Abgrenzung zwischen VOL- und VOF-Verfahren, ordnungsgemäße Schwellenwertermittlung, Finanzierung und Planung, richtige Vergabeart, richtige Leistungs- und Aufgabenbeschreibung, ordnungsgemäße Wertung, Aufhebung der Ausschreibung, ordnungsgemäßer Vergabevermerk KW - Baubetriebslehre KW - Öffentlicher Auftrag / Vergabe KW - Deutschland / Vergabe- und Vertragsordnung für Bauleistungen KW - Ausschreibung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7175 ER - TY - JOUR A1 - Neef, Sonja T1 - Was ist Europäische Medienkultur? T1 - Translating Europe N2 - Der Sage nach wurde Europa, jene fremde Königstochter, vom Göttervater Zeus in der Verkleidung eines majestätischen Stiers vom fernen Phoenizien nach Kreta – wörtlich – „übertragen“, das heißt von hier nach dort getragen. So gesehen erzeugt Europa einen dritten Raum, einen Trenn- und/oder Bindestrich zwischen Orient und Okzident, als diasporadische Figur und auch als Kontinent. Die Logik eines solchen Strichs, der zugleich trennt und verbindet, findet eine kartographische Entsprechung im nullten Längengrad, der die ganze Welt in ein Einheit schaffendes Koordinatensystem „übersetzt“, mit Greenwich als Zentrum. Ein Äquivalent eines solchen fixen Ausgangspunktes findet sich in der perspektivischen Europa-Darstellung in Tiepolos Darstellung der Kontinente im Deckenfries des Treppenhauses der Fürstbischöflichen Residenz in Würzburg. In diesem architektonischen Gemälde bildet Europa das Frontispiz, das nur von einem privilegierten Standort auf dem ersten Treppenabsatz unverzerrt betrachtet werden kann. Gegenstand dieses Beitrags sind eben diese drei medienkulturellen Europa-Inszenierungen: 1.) eine Sage, 2.) das kartographische Element des Nullmeridians und 3.) Tiepolos Treppenhausgemälde, sie alle verstehe ich als medienkulturelle Übersetzungen Europas. Ziel dieses Beitrags ist es zu fragen, wie diese drei kulturellen Objekte in ihren jeweiligen medialen Modi am Europa-Begriff arbeiten. Dreh- und Angelpunkt ist dabei der Akt des Übersetzens, und zwar sowohl im Sinne einer Umschrift von einem medialen Modus in den anderen als auch als durchaus physisch zu verstehende Bewegung einer Migration zwischen Heimat und Fremde. Ergebnis dieser Betrachtungen ist ein Europa-Begriff, der nicht unproblematisch mit sich selbst identisch ist, sondern sich erst in der Bewegung des Übersetzens konstituiert, also im dritten Raum oder als Bindestrich zwischen den Kulturen. N2 - The “origin” of the idea of Europe—if there is one—may be found in Hesiod’s mythological writings. Europe, daughter of Agenor, was—literally—“translated” from Phoenicia to Crete by Zeus who was disguised as a majestic bull. Thus seen, deception and robbery form the foundation of the birth of a continent, at least mythologically. This idea of Europe from antiquity soon developed into a world view in which Europe formed the centre of the terra cognita. In order for the terra incognita to be positioned in relation to this, a fixed point was required. This was finally found in the cartographic element of the zero-meridian. As an ideological line, the longitude-zero provided a unifying system into which the whole world was to be “translated.” Such a euro-centristic zero-point is not only found in cartography, it also has an equivalent (or translation) in perspectival painting, namely in the zero-point or vanishing point. The cultural significance of a zero-point in relation to the idea of Europe is particularly striking in Tiepolo’s painting of the continents in the Treppenhaus in Würzburg. In this architectonic painting, Europe is the subject matter of the frontispiece painted on the stair-well. In order to view this work without distorting the representation, it must be seen from a privileged point on the first half-landing. Here again: deception and illusion. The aim of this paper is to destabilize precisely these fixed positions which establish a Europe that appears unproblematically identical with itself. To do so, I will risk gazing at Tiepolo’s Europe from marginal points of view; that is, from Africa or Asia. And—for the longitude-zero—I will question the cut of the world into two opposite hemispheres, east and west. Europe, then, appears to be always in a state of translation, never fixed in an origin, never being ‘home’ as a final destination. Likewise the Europe in mythology, Europe as a continent, is split by difference while simultaneously driven by desire for a foreign country (Crete). Similarly, the zero-meridian, is a hybrid in between west and east, a translation in between home and abroad. Europe is then always permeated with otherness. KW - Kulturwissenschaften KW - Studiengang Kulturwissenschaften KW - Kulturwissenschaftliches Studium KW - Kulturwissenschaftler KW - Medienkultur KW - Europa KW - Geschichte KW - Antike KW - Culture of Media KW - History KW - europe Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2262 N1 - Eine englische Version dieses Artikels erscheint in Discerning Translations, ed. Mieke Bal and Joanne Morra, Princeton UP (forthcoming). ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Was ist die richtige Systemantwort auf die sich atomisierende Bauwirtschaft? N2 - Nur durch Aufträge entsteht das Potenzial, die hochwertigen und modernen Produkte, Verfahren und Systeme auch erfolgreich und vielfach in die Realität umzusetzen. Deshalb sind auch im traditionellen Bauwesen die Mechanismen des Marketings für die Akquisition zu analysieren und hinterfragt der Verfasser das Bild von Baubetrieben als kompetente Anbieter für alle Phasen des Bauens vom Baustoff bis zur Inbetriebnahme eines schlüsselfertigen Objektes. Systemanbieter bereiten die Basis für eine innovative und vernetzte Arbeitsweise. KW - Baubetriebslehre KW - Marketing KW - Akquisition KW - Bauwirtschaft Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7161 ER - TY - CHAP A1 - Miles, John A1 - Taylor, Mark A1 - Anumba, Chimay T1 - VRML Virtual Worlds - An Alternative to the Desktop Metaphor for GUI's? N2 - Metaphors are commonly used by software developers in the creation of GUI's. This paper looks at the use of multi-user VRML to create virtual metaphors, developing a conceptual design tool that can be used intuitively with little or no training. KW - Architektur KW - Verteiltes System KW - Graphische Benutzeroberfläche KW - VRML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1855 ER - TY - JOUR A1 - Kaapke, Kai A1 - Milbradt, Peter T1 - Voronoi-based finite volume method for transport problems N2 - Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Transport Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2558 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Alekseeva, Elena A1 - Tarlapan, Oleg T1 - Virtual Construction using Map-based Approach N2 - The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Virtuelle Realität KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2447 ER - TY - CHAP A1 - Katzer, Wolfgang T1 - Virtual Construction for our industry – an advantage now, a necessity soon N2 - Some key facts about the economic environment of construction industry are explained. It is shown that construction industry is very heterogeneous and has changed drastically during the recent years due to a rapidly moving commercial environment. Two examples of todays’s use of virtual construction tools in construction projects are presented. The first example is the document control for a large international project. The second is the application of 4D modelling in the preconstruction phase of a dam project. It is shown that virtual construction, is a major international trend that currently takes up speed. Some generic industry needs for Research and Development which aims at short and medium term results are presented. KW - Konstruktion KW - construction industry Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1573 ER - TY - THES A1 - Füllsack-Köditz, Raimo T1 - Verbundverhalten von GFK-Bewehrungsstäben und Rissentwicklung in GFK-stabbewehrten Betonbauteilen T1 - Bond characteristics of GFRP-rebars and cracking formation of GFRP reinforced concrete structures N2 - In der vorliegenden Arbeit werden im Rahmen von Ausziehversuchen die Verbundeigenschaften verschiedener Bewehrungsstäbe aus glasfaserverstärkten Kunststoffen (GFK) unter Berücksichti-gung signifikanter Einflussgrößen auf das Verbundverhalten wie Oberflächenprofilierung der Stäbe, Stabdurchmesser, Betonfestigkeit, Verbundlänge sowie Beanspruchungsart unter einheitlichen Versuchsrandbedingungen bestimmt. Es erfolgt eine Bewertung der Einflussgrößen, der Verbundeigenschaften und des Verbundversagens der untersuchten GFK-Bewehrungsstäbe. Basierend auf der Modellbildung zum Verbund zwischen GFK-Stäben und Beton wird die Bestimmung der Verankerungslänge aufgezeigt. Im Rahmen von Versuchen an GFK-stabbewehrten Dehnkörpern und Balken wird die Auswirkung der spezifischen mechanischen Eigenschaften der GFK-Stäbe auf die Rissentwicklung gegenüber stahlbewehrten Bauteilen untersucht. Insbesondere wird betrachtet, welchen Einfluss das Bewehrungsmaterial, der Bewehrungsgrad, die Betonfestigkeit sowie die Belastungsart auf die Mitwirkung des Betons auf Zug zwischen den Rissen sowie auf die Entwicklung des Rissbildes, der Rissbreiten und der Rissabstände haben. Auf Grundlage der experimentellen Untersuchungen wird die Übertragbarkeit der für Stahlbetonbauteile üblichen Ansätze zur Bestimmung der Rissbreite auf GFK-stabbewehrte Betonbauteile bewertet. N2 - The objective is to determine the bonding characteristics of different types of glass fiber reinforced plastic (GFRP) rebars using pull-out tests taking into consideration of significant influence parameters such as the type of bar surface deformation, bar diameter, concrete strength, bonding length and type of loading. The influence parameter will be appraised. The bonding characteristics an the bonding failure of the tested GFRP rebars will be classified. The determination of anchorage length for GFRP rebars will be shown based on bond models for GFRP rebars analogue to reinforcing steel. The scope of tests performed on GFRP reinforced beams and concrete tensile specimens will allow investigation into effects on the specific mechanical behaviours and the specific bonding characteristic of GFRP reinforcing bars on cracking formation. The effects of the physical behaviours of reinforcing material, percentage of reinforcement, concrete strength and type of loading on tension stiffening as well as crack pattern, crack widths and crack spacing will also be examined. Analysis of the results from these experiments will determine whether statements regarding crack width calculation are transferable between reinforced concrete structures and GFRP reinforced concrete structures. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 1 KW - Verbundverhalten KW - Glasfaserverstärkter Kunststoff KW - Stahlbetonkonstruktion KW - Stahlbeton KW - Stahlbetonbau KW - GFK KW - Ausziehversuch KW - Rissentwicklung KW - Rissbreite KW - Verbund KW - GFRP KW - bond KW - cracking KW - concrete KW - pull-out Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041206-2344 SN - 3-86068-240-7 ER - TY - THES A1 - Germerott, René T1 - Variantenuntersuchung für eine dauerhafte Bahndammsanierung unter zu Hilfenahme numerischer Methoden N2 - Das Ziel der Arbeit war es, die Standsicherheit eines Bahndammes im Vergleich der in Deutschland gültigen Vorschriften (DIN 1054 und Eurocode 7) zu untersuchen. Sollte sich dabei herausstellen, dass der Bahndamm in der gegebenen Situation die Standsicherheitsanforderungen nicht erfüllt sollten verschiedene Sanierungsvarianten vorgeschlagen und für eine Vorzugsvariante die wichtigsten Nachweise durchgeführt werden. Zunächst wurden die Allgemeinen Grundlagen der zur Zeit in Deutschland gültigen Vorschriften erläutert und anschließend auf das konkrete Projekt bezogen gegenübergestellt. Es stellte sich heraus, dass die Anforderungen an die Standsicherheit bei Berechnung nach beiden Vorschriften nicht erfüllt werden konnten. Somit war es notwendig für die gegebene Situation mögliche Sanierungsvorschläge zu entwickeln. Diese wurden anschließend kurz vorgestellt und erläutert. Schließlich wurden für die Vorzugsvariante die wichtigsten Nachweise im Vergleich der Vorschriften (DIN 1054 und Eurocode 7) durchgeführt und verglichen. KW - Aktiver Erddruck KW - Bewehrte Erde KW - Böschungsbruch KW - Erddruck KW - Eurocode 7 KW - Geländebruch KW - Passiver Erddruck KW - Pfahlwand KW - DIN 1054 Teil 100 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3500 ER - TY - CHAP A1 - Robert-Nicoud, Yvan A1 - Raphael, Benny A1 - Smith, Ian F. C. T1 - Using entropy to maximize the usefulness of data collection N2 - This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon’s Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system. KW - Mobile Computing KW - Funknetz KW - Entropie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1177 ER - TY - CHAP A1 - Parmee, Ian A1 - Abraham, Johnson T1 - User-centric Evolutionary Design Systems - the Visualisation of Emerging Multi-Objective Design Information N2 - The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers. KW - Konzipieren KW - Bauwerk KW - Künstliche Intelligenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1094 ER - TY - JOUR A1 - Katranuschkov, Peter A1 - Gehre, Alexander A1 - Scherer, Raimar J. T1 - User Requirements Capture in Distributed Project Environments: A Process-centred Approach N2 - Efforts to define standards for representing AEC/FM data have been fairly successful. However defining a standard reference process model has not met with the same success. Yet almost every conceptual modelling or software development project starts by defining the business processes to be supported and the related requirements to be satisfied. This paper describes a new process-centred methodology for user requirements capture developed in the ICCI project (IST-2001-33022). Its essence is in recognising user requirements and use cases in the context of the real construction process, identifying the actors and roles for each individual activity and associating these activities with information, communication and standardisation requirements on the basis of a formalised specification, named the Process Matrix. In the paper we outline the history of process matrix development, introduce the basic structure of the matrix and show how it can be further extended and refined. We present also a web-based software implementation of the developed approach, describe how it has been used in ICCI and outline further perspectives. KW - Informationstechnik KW - Forschung KW - Europa KW - Bedarfsforschung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2029 ER - TY - THES A1 - Lehmann, Steffen T1 - Untersuchungen zur Bewertung von Verbundbauteilen aus Brettstapelelementen im Flächenverbund mit mineralischen Deckschichten T1 - Investigations for the evaluation for bonding behaviour of nail-laminated timber floor elements in surface bond with mineral-bound facing N2 - Zur Verbindung des flächigen Bauteils Brettstapelelement mit mineralischer Deckschicht sind bisher kaum geeignete einfachste Fugenausbildungen untersucht. Bei dieser biegebeanspruchten hybriden Verbundkombination bietet das zugbeanspruchte Holz und die druckbeanspruchte mineralische Deckschicht im Verbund ein günstigeres Biegetragverhalten und verbessert im Vergleich zum reinen Brettstapeldeckenelement dessen Eigenschaften. Für die Steifigkeit und die Tragfähigkeit der Verbundkonstruktion ist die Ausbildung der Verbundfuge, die effektive Übertragung der Schubkraft ausschlaggebend. Die vom Verfasser der Arbeit durchgeführten Versuche haben gezeigt, dass der Einsatz alternativer Verbundfugenausführungen grundsätzlich möglich ist. Mit diesem Wissen scheint neben dem Einsatz nachgiebiger Verbindungsmittel auch die Heranziehung, Erfassung und Optimierung des Flächen- sowie Reibungsverbundes zwischen flächigen Holzelementen und mineralischen Deckschichten eine effiziente und sichere Fugenausbildung darzustellen. Für weiterreichende und genauere Aussagen, sind neben der versuchstechnischen Abklärung der Wirksamkeit möglicher chemischer als auch mechanischer Modifikationen der Holzoberfläche in der Verbundfuge computergestützte Kurzzeit- sowie auch Langzeituntersuchungen zur Abschätzung der Möglichkeiten und Zuverlässigkeit des Flächenverbundes zwischen Brettstapelelement und mineralischer Deckschicht unabdingbar gewesen. Als Deckschichtvarianten kamen Normalbeton, Zementestrich, Anhydritestrich und Geopolymerbeton zur Anwendung. Es konnte durch eine statistische Auswertung im Resultat ein Gesamtüberblick über das Tragverhalten von hybriden Verbundelementen mit mineralischen Deckschichten und spezieller Oberflächenbehandlung des Holzes gegeben werden. Dabei wirkten sich die Vorteile bei der Nutzung des Flächenverbundes vor allem auf den Gebrauchszustand des Bauteils aus. Die Steifigkeit des Verbundbauteils wurde durch den Flächenverbund erhöht und es wurden damit günstigere Voraussetzungen für den Nachweis der Gebrauchstauglichkeit vor allem bei Spannweiten über 5,0 m erzielt. Die Untersuchungen zeigen die grundlegende Anwendbarkeit für Brettstapel im Flächenverbund mit mineralischen Baustoffen. N2 - Timber-composite elements for buildings combining the favourable load-carrying and surface characteristics of mineral-bound facing and structural timber. The connection between timber and covering layer is of fundamental importance for the stiffness properties and overall performance. Since these systems have been usually realized as timber-concrete composite beams and vertical laminated slabs or revitalization of wooden joists ceilings, metal and groove connectors were usually investigated and used for shear force transfer. Thereby, the separating layer prevented a direct and overall bound. For investigation of the natural adhesion between timber and the covering layer as well as the shear force transfer, different modifications of the timber floor surface (e.g. profiled lamellas) and mineral-bound layer were tested, in fact roughly saws and additionally profiled lamellae of nail-laminated timber elements in combination with accepted mineral-bound layers, for instance concrete, concrete of geopolymer, cement and anhydrite screed. The accomplished tests were completely done without additionally metal connectors and separating layer. Only the natural adhesive bond between timber and applied mineral-bound facing should be sufficient to transfer the shear and tension forces between the layers. An overview of shear, tension and bending tests, performed to examine the load-slip behaviour is given. Based on these numerical simulations and test results the behaviour of natural surface bond is described. KW - Holzbau KW - Hybridbauweise KW - Verbundbauweise KW - Brettstapelbau KW - Betonbau KW - Holzbauteil KW - HBV KW - Flächenverbund KW - Verbunddeckenplatten KW - Langzeittragverhalten KW - Steifigkeit KW - timber KW - timber-concrete composite KW - bond KW - slip-block-test KW - composite elements Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041216-2479 ER - TY - THES A1 - Berger, Martin T1 - Typologiebildung und Erklärung des Aktivitäten-(Verkehrs-)verhaltens – ein Multimethodenansatz unter Verwendung der Optimal Matching Technik T1 - Classifcation and description of travel-activity behaviour - a multi-method approach under application of the Optimal Matching Technique N2 - Vor dem Hintergrund des gesellschaftlichen Wandels sieht sich die Verkehrsforschung mit neuen Anforderungen an die Konzeption, Anpassung, Anwendung usw. von statistischen Ansätzen zur Analyse des Aktivitäten-(Verkehrs-)verhaltens konfrontiert, um auf Basis empirischer Daten adäquat Zusammenhänge der Verkehrsentstehung zu erforschen. Ausgehend von der musterorientierten Perspektive - das heißt Untersuchungsgegenstand sind chronologische Abfolgen von Ortsveränderungen und Tätigkeiten in Form von Wege-Aktivitätenmustern - besteht das Ziel einer möglichst realitätsnahen Abbildung und Erklärung von individuellen Unterschieden im Raum-Zeit-Verhalten. Neu bzw. kaum etabliert sind in diesem Kontext der eigens konzipierte Multimethodenansatz sowie die Optimal Matching Technik, die erweiterte Abbildungseigenschaften zur Distanzmessung zwischen Wege-Aktivitätenmustern aufweist. Erkannt werden durch jene Methode gleiche Tätigkeiten bzw. Ortsveränderungen, die zeitlich an unterschiedlichen Stellen der zu vergleichenden Muster angeordnet sind sowie identische Subsequenzen. Zielführend in der Datenanalyse ist nachstehende Abfolge von Verfahren: Die Klassifikation von Wege-Aktivitätenmustern zur Reduktionen deren immenser Komplexität gelingt durch Einsatz der Optimal Matching Technik. Diese quantifiziert (Un-)ähnlichkeiten zwischen Wege-Aktivitätenmustern („Abstandsmessung“) unterschiedlicher Personen oder zu vergleichender Zeitabschnitte einer Person. Die dadurch berechnete Distanzmatrix bildet den Ausgangspunkt des clusteranalytischen Fusions-algorithmus, dessen Aufgabe die Zusammenfassung der Wege-Aktivitätenmuster ist (explorative Stufe). Die Anwendung eines multinomialen Logit-Modells ermöglicht auf Individualebene die Vorhersage der Affinität zu Wege-Aktivitätenmuster-Typen anhand von Merkmalswerten identifizierter Erklärungsgrößen der Personen, des Haushaltes usw. (induktive Stufe). Im Gegensatz zu einschlägigen Forschungsarbeiten zeichnet sich die gewählte Untersuchungsstrategie durch die Objektivität des Vorgehens aus, da eine a-priori Bildung von Personen-kategorien nicht notwendig ist. Ebenso grenzt die Berücksichtigung der zufälligen und nicht-erklärbaren Verhaltensvariabilität durch das Wahrscheinlichkeitsprinzip des gewählten Logit-Modells das eigene Vorgehen von anderen Untersuchungen ab. Aufgrund der weitgehend ungeklärten Anwendungsgrundlagen der Optimal Matching Technik befasst sich die vorliegende Arbeit zunächst mit dessen inhaltlicher Ausrichtung am Untersuchungsgegenstand. Die Anpassung der festzulegenden Aufwandswerte, welche für die benötigten Aktionen angesetzt werden, um ein Wege-Aktivitätenmuster in ein anderes zu transformieren, erfolgt mit Hilfe einer empirisch Abschätzung, die weit über ein argumentatives Vorgehen hinausgeht. Der ermittelte Sequenzabstand inkludiert dabei die operationsspezifische Distanz bei Übergängen zwischen den konstituierenden Zuständen der zu vergleichenden Wege-Aktivitätenmuster („Zustandsähnlichkeit“). Abstandsmaß für die qualitativen Zustände ist dabei die ermittelte Priorität von wege- und tätigkeitenbezogenen Handlungen. Die Relevanz einer Ausrichtung belegt auch die durchgeführte Sensitivitätsanalyse: Das Ausmaß der Empfindlichkeit der Optimal Matching Technik ist insbesondere gegenüber der Festlegung der Aufwandswerte beträchtlich. Um die Analysepotenziale des Multimethodenansatzes zu demonstrieren, werden exemplarisch interpersonelle Unterschiede im wöchentlichen Aktivitäten-(Verkehrs-)verhaltens (Datenbasis: deutsches Mobilitätspanel) analysiert. Ergebnis der Klassifikation (explorative Analysestufe) ist eine auf den ersten Blick inhaltlich stichhaltige Wege-Aktivitätenmuster-Typologie charakteristischer Wochenabläufe des Aktivitäten-(Verkehrs-)verhaltens: Unterschiedliche Arten, zeitlicher Umfang und zeitliche Lage der Haupt-aktivitäten, unterschiedliche Verkehrsverhaltensweisen sowie unterschiedliche clusterspezifische Tag zu Tag Rhythmen, Gleichförmigkeiten, Schwankungen usw. des Raum-Zeit-Verhaltens kennzeichnen die Wege-Aktivitätenmuster-Typen. Die Abbildungs-eigenschaften der Optimal-Matching Technik zeichnen sich in den erstellten Clustern nur teilweise ab: Während die Zustandselementkomposition - augenscheinlich betrachtet - passabel durch die Wege-Aktivitätenmuster-Typologie abgebildet wird, bleibt ungewiss, ob und inwieweit dies für die Abfolgeähnlichkeit gilt. Aus dem induktiven Analyseschritt geht hervor: Alter, Geschlecht, Verfügbarkeit einer ÖPNV-Zeitkarte, Führerscheinbesitz und mit herausragender Bedeutung der Erwerbsstatus signalisieren als maßgebende Erklärungsgrößen eine Trennwirkung. Überdies zeigt das Gesamtbild der ermittelten Wirkungsrichtungen und Effektstärken überzeugende Erklärungszusammenhänge auf. Damit ist ein Nachweis der Praktikabilität des eigens konzipierten Multimethodenansatzes unter Verwendung der Optimal Matching Technik zur musterorientierten Analyse des Raum-Zeit-Verhaltens erbracht. N2 - Social change is reflected in more and more complex individual travel-activity behaviour, which can be represented as travel-activity patterns. The analytical classification of travel activty-pattern into groups and the description of the travel activty-pattern types is an important issue to travel-activty behaviour analysis for a long time. A realistic measure between individual travel-activity patterns is the basis for the analysis and the description of differences in travel-activity behaviour. In the centre of the multi-method-approach stands the practical application of the so-called Optimal Matching Technique. This approach is adapted, tested and applied. This method involves the element composition - identical activities and trips in both travel-activity patterns, which are arranged in different positions - and the element order - the identical order of activities and trips in both travel-activity patterns. The multi-method approach contains the following basic components: Classification of the travel-activity pattern: Statistical analysis starts with the most important point: the application of the Optimal Matching Technique. This sequence alignment method quantifies dissimilarities between travel-activity patterns in the form of distances. While conventional distance measures for sequences compare only elements of the same position, the Optimal Matching Technique extends the ability to measure the degree of differences between sequences. The result of the application of the Optimal Matching Technique is a symmetrical distance matrix, in which dissimilarity scores for the travel-activity patterns pairs are specified. As a second step, the purpose of the application of the cluster analysis is to classify the travel-activity pattern based on the calculated distance matrix of the Optimal Matching Technique Description of the travel-activity pattern types: The identification of variables, which explain the affinity to a travel-activity pattern type as independent variables, forms the main function of the last methodological step. For this problem, the use of a multinomial logit model is appropriate, because this method allows a determination of influences of different explanatory variables on a dependent, categorial variable. The explanatory model results in statements of probability for a person with personal, household and spatial characteristics to realize travel-activity pattern types. The multi-method approach is characterised by a direct strategy, which guarantees a high level of objectivity. Further on a probabilistic causal relation between person type and travel-activity pattern type is appropriate on the background of social change. The statistical methods for cluster analysis and the logit model are “state of the practice”. Only the new method Optimal Matching Technique will be described closer. For the application of the Optimal Matching Technique a priori assumptions must be made for the ”cost” of the transformation operation, which is a key issue of the method. The criteria of priority is introduced as a measure for states and changes in states for activities and trips. Testing the sensitivity of the results of the Optimal Matching Technique depends on the definition of “cost”. It can be concluded that there is a strong influence on travel-activity pattern distances. The multi-method approach is applied in an exemplary manner both to classify weekly travel-activity pattern and to describe the travel-activity pattern types. The empirical data-base is the German Mobility Panel (MOP). The classification results in a seven cluster solution of weekly travel-activity pattern types, which can be interpreted in a plausible way. It can be shown, that the approach of comparing activity-travel pattern based on the Optimal Matching Technique captures the element composition. It remains uncertain if and how far this succeeds to the element order. The seven travel-activity pattern types can be described in terms of sociodemographic characteristics ("age", “gender” and "status of employment"), “driving licence” and “discount public transport”. There is evidence that the multi-method-approach under application of the Optimal Matching Technique is a useful tool to analyse travel-activity behaviour KW - Verkehrsverhalten KW - Typenbildung KW - Sequenzanalyse KW - Abstandsmessung KW - Cluster-Analyse KW - Logit-Modell KW - Optimal Matching Technik KW - travel behavior KW - typology KW - similarity measurement KW - Optimal Matching Technique KW - cluster analysis KW - logit-model Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041115-2108 ER - TY - THES A1 - Zobel, Oliver Christian T1 - Typologie und Topologie der Pflegebedürftigkeit und -infrastruktur im Freistaat Thüringen; Explorative Analysen zu pflegebedürftigen Menschen und Pflegeinfrastrukturen,ein Beitrag zur empirischen Regionalforschung und Landeskunde N2 - Der Autor, Berater und Gutachter für das Thüringer Ministerium für Soziales und Gesundheit und Mitverfasser der Thüringer Landespflegepläne, systematisiert und analysiert die Struktur und Situation pflegebedürftiger Menschen und deren Inanspruchnahme sozialer Pflegeinfrastrukturen im räumlichen und demographischen Kontext. Im Mittelpunkt dieser regionalwissenschaftlichen Forschungsarbeit stehen räumliche Disparitäten der Versorgungs- und Angebotssicherung sowie bisher kaum betrachtete räumliche Strukturen und Interdependenzen der Pflegebedürftigkeit und Pflegeleistungen. Hierzu wurden vom Autor mehrere regional differenzierte Datenerhebungen aller teilstationären und vollstationären pflegebedürftigen Menschen und der Pflegeinfrastruktureinrichtungen im Freistaat Thüringen durchgeführt.Durch die Integration explorativer Analysemethoden in die empirische Regionalforschung wird die Pflegelandschaft Thüringens für den Zeitraum 1994 bis 2000 dokumentiert und anhand eines relationalen Indikatorensystems die Strukturen und räumlichen Muster der Pflegebedürftigkeit und -infrastruktur, soziodemographischen und raumstrukturellen Einflusskomponenten sowie pflegespezifische Interdependenzen exploriert und analysiert. Ein Ergebnis sind typologische Aussagen zum Alter, zur Pflegeart und -schwere oder Struktur der Pflegeleistungen in einer hochauflösenden topologischen Differenzierung nach regionaler Herkunft pflegebedürftiger Menschen. So hat die Einführung der Pflegeversicherung die Situation der meisten pflegebedürftigen Menschen in Thüringen deutlich verbessert. In der Zeitreihenuntersuchung treten diese Anfangserfolge aber hinter identifizierten Problemlagen aus z.B. sukzessiver Polarisierung der Pflegeleistungen, wachsenden Infrastrukturdisparitäten mit exakt quantifizierbaren Wanderungsbewegungen pflegebedürftiger Menschen zurück. Ein Ergebnis topologischer Analysen sind regionale (Versorgungs-) Disparitäten, die zu nachgewiesenen Wanderungsbewegungen pflegebedürftiger Menschen führen.So resultiert die noch nachweisbare Leistungs- bzw. Funktionsfähigkeit der Pflegelandschaft Thüringens (im Sinne der pflegerischen Grundversorgung einer Teilkaskoversicherung) primär aus noch günstigen Rahmenbedingungen wie dem „selbstverständlich“ erbrachten informellen Pflegeleistungen (der Frauen und Töchter) und nur sekundär (oder kaum) aus der durchaus noch guten finanziellen Situation der Pflegeversicherung. Ferner konnte gezeigt werden, dass wachsende Versorgungsdisparitäten nur anteilig eine Infrastrukturproblematik darstellen.Die Ergebnisse werden im Hinblick auf die entwickelten Methoden und weiteren Untersuchungen diskutiert und im Kontext des theoretischen Teils u.a. zur Entwicklung der Altenhilfe, Pflegeversicherung und sozialen Infrastrukturversorgung betrachtet und vor den Konsequenzen des demographischen Wandels reflektiert. Mit den Untersuchungsergebnissen fordert der Autor, dass Alterung und Schrumpfung der Bevölkerung in Teilräumen als dominante Entwicklung nicht verleugnet werden darf, damit durch eine integrative Gesamtsicht einer auch sozial nachhaltigen Raumentwicklung die pflegespezifische Forderung nach einem möglichst selbstbestimmten und selbständigen Leben (im eigenen Haushalt) gewahrt und das Grundrecht auf Würde auch pflegebedürftiger Menschen gewährleistet bleibt.Dazu wird vorgeschlagen, mit einer modernen Regionalforschung, die durch hochauflösende Datenerfassung, neuen explorativen statistischen Analysemethoden und in Verbindung mit aussagekräftigen Visualisierungsverfahren ein qualifiziertes Monitoring- und Analysesystem für die Raumbeobachtung aufzubauen, um Problemregionen rechzeitig identifizieren und Planungen zeitnah initiieren zu können. KW - Raumforschung KW - empirische Regionalforschung KW - Infrastrukturplanung KW - Disparitäten KW - Demographie KW - Pflegeversicherung KW - Landeskunde Thüringen KW - demographischer Wandel KW - Landespflegeplanung KW - Pflegestatistik KW - Pflegebedarf Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041207-2353 ER - TY - CHAP A1 - Garrett, James H. A1 - Akinci, Burcu A1 - Wang, Hongjun T1 - Towards Domain-Oriented Semi-Automated Model Matching for Supporting Data Exchange N2 - The process of matching data represented in two different data models is a longstanding issue in the exchange of data between different software systems. While the traditional manual matching approach cannot meet today’s demands on data exchange, research shows that a fully automated generic approach for model matching is not likely, and generic semi-automated approaches are not easy to implement. In this paper, we present an approach that focuses on matching data models in a specific domain. The approach combines a basic model matching approach and a version matching approach to deduce new matching rules to enable data transfer between two evolving data models. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1324 ER - TY - CHAP A1 - Boukamp, Frank A1 - Akinci, Burcu T1 - Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications N2 - This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system. KW - Bauwerk KW - Datenmanagement KW - Modellierung KW - Norm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1315 ER - TY - JOUR A1 - Aziz, Zeeshan A1 - Anumba, Chimay A1 - Miles, John T1 - Towards a Semantic Grid Computing Platform for Disaster Management in Built Environment N2 - Current disaster management procedures rely primarily on heuristics which result in their strategies being very cautious and sub-optimum in terms of saving life, minimising damage and returning the building to its normal function. Also effective disaster management demands decentralized, dynamic, flexible, short term and across domain resource sharing, which is not well supported by existing distributing computing infrastructres. The paper proposes a conceptual framework for emergency management in the built environment, using Semantic Grid as an integrating platform for different technologies. The framework supports a distributed network of specialists in built environment, including structural engineers, building technologists, decision analysts etc. It brings together the necessary technology threads, including the Semantic Web (to provide a framework for shared definitions of terms, resources and relationships), Web Services (to provide dynamic discovery and integration) and Grid Computing (for enhanced computational power, high speed access, collaboration and security control) to support rapid formation of virtual teams for disaster management. The proposed framework also make an extensive use of modelling and simulation (both numerical and using visualisations), data mining (to find resources in legacy data sets) and visualisation. It also include a variety of hardware instruments with access to real time data. Furthermore the whole framework is centred on collaborative working by the virtual team. Although focus of this paper is on disaster management, many aspects of the discussed Grid and Visualisation technologies will be useful for any other forms of collaboration. Conclusions are drawn about the possible future impact on the built environment. KW - Mehragentensystem KW - Lernendes System KW - Katastrophenmanagement KW - Software Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2084 ER - TY - THES A1 - Pastohr, Henry T1 - Thermodynamische Modellierung eines Aufwindkraftwerkes T1 - Thermodynamical modelling of an upwind power plant N2 - Die Energieversorgung auf der Erde wird zukünftig zu einem Problem. Bedingt ist dies durch eine fortschreitende Verknappung der natürlichen Ressourcen, wie Kohle, Gas und Öl sowie einer Zunahme der CO2-Konzentration und anderer Schadstoffe in der Atmosphäre. Regenerative Energiequellen müssen genutzt werden, um den steigenden Energiebedarf zu sichern. Eine interessante Möglichkeit zur Nutzung der Solarenergie stellt das Aufwindkraftwerk dar. Das Aufwindkraftwerk besteht aus einem Kamin, um den ein Glasdachkollektor auf dem Erdboden angeordnet ist. Am Fuße des Kamins befinden sich Turbinen und Generatoren. Die einfallende Solarenergie wird hauptsächlich über die Wechselwirkung mit dem Erdreich in thermische Energie, in kinetische Energie, in Rotationsenergie und in elektrische Energie umgewandelt. Das Ziel der Arbeit bestand in der physikalisch-mathematischen Modellierung, der genaueren Erkennung des Wirkprinzips und der Diskussion der Anlagenparameter Leistung und Wirkungsgrad. Im Rahmen dieser Aufgabe wurden dazu stationäre und instationäre Computational Fluid Dynamic (CFD) Modelle und stationäre und instationäre vereinfachte Modelle entwickelt, diskutiert und miteinander verglichen. Grundlegend neue Erkenntnisse wurden bei den Verläufen der Temperaturen im Kollektor, insbesondere der Erdoberflächentemperatur erreicht. Parameteranpassungen im Wärmeübergangsmodell und Widerstandsmodell führten für vier ausgewählte, stationäre Sonnenenergien auf eine gute Übereinstimmung zwischen den Ergebnissen (Temperaturhub, Druckentnahme, Leistung und Wirkungsgrad) des stationären, hybriden Modells und des stationären CFD-Modells. Weiterhin stimmen die lokalen Größen Wärmeübergangskoeffizient, Erdoberflächentemperatur, Lufttemperatur und Glasdachtemperatur gut zwischen den Modellen überein. Mit dem CFD Modell wurden der Prototyp und 3 Großkraftwerke berechnet. Mit dem entwickelten instationären FDM-Modell wurden erstmalig numerische Langzeitsimulationen (1 Jahr) durchgeführt. Zur Überprüfung des Modells wurden die Ergebnisse mit Messwerten aus Manzanares verglichen, wobei eine gute Übereinstimmung erreicht werden konnte. Das Verständnis für die stattfindenden thermodynamischen und strömungsmechanischen Prozesse in einem Aufwindkraftwerk konnte durch die Arbeit maßgeblich verbessert werden. N2 - The energy supply on our earth will become a problem in future. This is conditional by a shortage of the natural source, like coal, gas and oil, as well as an increase in the concentration of gasous CO2 in the atmosphere. Regenerative energy sources must be used more increasingly to saveguard the increasing energy consumption. Upwind power plants represent an interesting possibility for the use of solar energy. The upwind power plant consist of an collector, an chimney and one ore several turbines. The collector heats the air by the interaction with the ground. The glass reflects the infrared radiation of the ground. The Chimney provides a large density difference between the collector exit and the atmosphere. The goal of this work was the mathematical und physical modelling of the thermodynamics in and around an upwind power plant. Steady and unsteady CFD models and steady and unsteady simplified models were developed and compared. Basically new knowledge was reached at the courses of the temperatures in the collector. A very good agreement between the results of the steady hybrid model and the steady CFD model (temperature difference of the collector, pressure at the turbine, power and degree of effectiveness) could be found for four solar energies. Furthermore, the local values of heat-transfer coefficient, soil temperature, temperature of the fluid and the temperature of the glass roof compare very well beetwen the models. The prototyp manzanares and three large power plants were solved with the developed CFD model. Numeric long time simulations (1 year) were carried out for the first time with the developed unsteady Finite-Difference-Model. The model was compared with results of the project Manzanares. A good agreement was found. The knowledge of the thermodynamical und fluid dynamical processes in an upwind power plant were improved substantial by this work. KW - Aufwindkraftwerk KW - Numerische Strömungsmechanik KW - Mathematisches Modell KW - Thermodynamik KW - Sonnenenergie KW - Sonnenkollektor KW - upwind power plant KW - CFD KW - mathematical modelling KW - thermodynamics KW - solar energy Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040803-867 ER - TY - THES A1 - Scholz-Solbach, Kai T1 - Thermische Effekte der tiefgründigen Bodenstabilisierung mit Branntkalk-Boden-Säulen T1 - Thermal Effects of Deep Soil Stabilization with Lime Columns N2 - Gegenstand der Arbeit ist die Untersuchung der bei der Herstellung von Branntkalk-Boden-Säulen auftretenden thermischen Effekte und ihres Einflusses auf Wasser- und Wasserdampftransporte im Boden. Die Erwärmung beruht vorrangig auf einer chemischen Reaktion, bei der das dem Boden zugemischte Calciumoxid mit Bodenwasser unter Freisetzung von Wärmeenergie zu Calciumhydroxid reagiert. Hierzu wurden zunächst die thermischen Eigenschaften feinkörniger Böden und ihre Beeinflussung durch das Herstellen des Bindemittel-Boden-Gemisches in situ untersucht. Weiterhin wurden Untersuchungen zum zeitlichen Verlauf der chemischen Reaktion und zur Größe der dabei freigesetzten Reaktionswärme vorgenommen. Mit dem Vorhaben, die mit der Säulenherstellung einhergehenden Temperaturfeldänderungen zu erfassen, wurden danach die thermischen Anfangs- und Randbedingungen des Bodens und der Bodenoberfläche untersucht und festgelegt. Anschließend wurden die zeitabhängigen Temperaturfeldänderungen auf der Grundlage der Wärmeübertragung durch Wärmeleitung mit Hilfe des Finite-Elemente-Methode Programms Ansys® 6.1 numerisch simuliert. Das Finite-Elemente-Modell wurde durch die Nachrechnung von Feldversuchen verifiziert. Im Rahmen der Finite-Elemente-Berechnungen wurde die infolge der Hydratation des Branntkalkes stattfindende Erwärmung des Bindemittel-Boden-Gemisches und des angrenzenden Bodens simuliert und hinsichtlich relevanter Einflussgrößen überprüft. Untersucht wurde der Einfluss herstellungsbedingter Faktoren wie Bindemittelkonzentration, Säulendurchmesser und Säulenanordnung sowie der Einfluss natürlicher Faktoren wie Trockendichte und Sättigungsgrad des Bodens. Die mit Hilfe der Finite-Elemente-Methode ermittelten zeitabhängigen, im Boden auftretenden Temperaturgefälle bilden die Grundlage für die Untersuchung der thermisch bedingten Wassertransportvorgänge in der Stabilisierungssäule und deren Umfeld. Zu diesem Zweck wurde die durch die Temperaturfeldbeeinflussung geänderte energetische Situation des Bodenwassers analysiert. Auch nicht-thermische, infolge der Säulenherstellung auftretende Effekte wie die durch den >Stopfeffekt< bedingte lokale Sättigungsänderung und die Beeinflussung des osmotischen Potentials einschließlich der daraus resultierenden Wasserbewegungen wurden berücksichtigt. Alle thermisch verursachten Wasser- und Dampfflüsse bewirken ein Abströmen von Porenwasser aus dem stabilisierten Erdkörper in den umliegenden Boden. Baupraktisch bleiben die durch thermische Einflüsse hervorgerufenen Wassertransportvorgänge aufgrund ihres geringen Betrages jedoch unbedeutend. In abschließenden Temperaturfeldberechnungen wurden die thermischen Bodenkennwerte an die sich zeitlich verändernde Wassersättigung des Bodens angepasst. Anhand der ermittelten Temperaturverläufe wurde aufgezeigt, dass der Einfluss der Sättigungsänderung auf die Berechnungsergebnisse sehr gering ist, und damit die Voraussetzung für die vorangegangene entkoppelte Betrachtung des Wärme- und Massestromes erfüllt ist. Aufgrund dieser Ergebnisse muss der mehrfach in der Literatur zitierte, auch mit der tiefgründigen Bodenstabilisierung in Zusammenhang gebrachte, Einfluss der Erwärmung auf die Verdunstung des Bodenwassers kritisch betrachtet und in Frage gestellt werden. Voraussetzung hierfür ist der Transport von Wasser an die Bodenoberfläche. Nennenswerte, auf Temperatureinflüssen beruhende Wasserbewegungen sind, wie die Berechnungsergebnisse gezeigt haben, nicht zu erwarten. Weitere Untersuchungen zur Festigkeitsentwicklung von Branntkalk-Boden-Säulen und deren Vorhersage sollten sich daher auf die mechanischen Effekte und auf die mineralogisch-chemischen Prozesse, wie die puzzolanischen Reaktionen, und die Möglichkeiten ihrer Prognose konzentrieren. Die Berechnungen haben gezeigt, dass die Temperaturentwicklung in der Stabilisierungssäule im Wesentlichen durch die Bindemittelkonzentration, und ihr Auskühlungsverhalten vorrangig durch ihre geometrischen Abmessungen bestimmt wird. Diese Sachverhalte sind von den Bodenparametern, der für die Stabilisierung in Frage kommenden Böden, weitestgehend unabhängig. Temperaturmessungen stellen daher ein geeignetes Mittel zur Qualitätssicherung bei der Herstellung von Branntkalk-Boden-Säulen dar, mit deren Hilfe sich Inhomogenitäten bei der Bindemittelverteilung oder Störungen beim Hydratationsvorgang (Ablöschen des Branntkalkes) nachweisen lassen. Entsprechende Hilfsmittel wurden angegeben. N2 - Deep stabilization of soil with lime columns causes thermal effects. This is mainly due to the reaction of the unslaked lime with the water in the soil. In this thesis the influence of the thermal effects on the movement of soil water was investigated. In a first step the thermal properties of the stabilized soil in the column and the surrounding soil were analysed. In order to calculate the alteration process of the temperature fields the heat generation coupled to the chemical reaction and the thermal boundary conditions like the distribution of temperature in natural soils were defined. On this base the transient change of the temperature field around the lime columns was computed using the finite element method. The numerical analysis was done with the finite element code ANSYS® 6.1. Due to the high saturation of the stabilized and the surrounding soils only heat transfer by thermal conduction was regarded in the first calculation step. For the present the coupled transport of heat and moisture was neglected as well as the influence of moisture movement on the thermal properties. The model was verified by simulating a large-scale field experiment of the Swedish Geotechnical Institute from which temperature measurements were stated. Very good correlations were achieved between experimental and numerical results. In the next step the influences of the soil parameters, the geometry of the lime columns as well as their arrangement, and the lime concentration on the numerical results were investigated. The computed transient temperature fields and the derived thermal gradients formed the basis for the analysis of temperature-dependent moisture movement in the lime columns and in the surrounding soil. Water and water vapour move due to potential gradients from high to low potential. Therefore, the change of the soil water potential caused by thermal effects was regarded. Also, non-thermal effects such as the change of saturation due to soil compaction and the alteration of the osmotic potential due to dissolution processes were taken into consideration. The calculation results indicated a flow of liquid water and water vapour from the centre of the lime columns towards the surrounding soil. The results also showed that the amount of moisture moved by thermal effects is low and does not contribute to the hardening of the lime columns. In a closing calculation step the change of saturation due to thermal and non-thermal effects was taken into account by adapting the thermal soil parameters to the time-dependent distribution of the soil water. It was shown that the altered saturation has negligible effect on the calculated temperature fields. Therefore, the assumptions made in the first calculation step, concerning the mechanism of heat transfer, were proven true. Based on these results, the often-cited influence of the heat released when unslaked lime reacts with the water in soil has to be called into question, at least in the case of the deep stabilization of soils with lime columns. That would require, for example, the transport of moisture to the soil surface, which according to the results of the calculations is not given. Further investigations into the hardening of lime columns and the prediction of this process should concentrate on mechanical and mineralogical effects such as soil compaction and the pozzolanic reactions. Temperature measurements may serve as a good tool for quality assurance, because the development of heat depends strongly on the lime concentration, while the influence of the soil parameters of the stabilized clayey soils on the change of temperature is very small. Appropriate data were given in this thesis. KW - Bodenverbesserung KW - Kalk-Boden-Säulen KW - Bindemittel-Boden-Säulen KW - tiefgründige Bodenstabilisierung KW - Baugrundverbesserung KW - Lime Columns KW - Deep Soil Stabilization Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050307-3972 ER - TY - CHAP A1 - Ward, Michael A1 - Thorpe, Tony A1 - Price, Andrew T1 - The Re-use of Site Data to Inform Business Processes N2 - The increased implementation of site data capture technologies invariably results in an increase in data warehousing and database technologies to store captured data. However, restricted use of data beyond the initial application could potentially result in a loss of understanding of site processes. This could in turn lead to poor decision making at production, tactical and strategic levels. Concrete usage data have been collected from two piling processes. These data have been analysed and the results highlighted potential improvements that could be made to existing site management and estimating processes. A cost benefit analysis has been used to support decision making at the strategic level where the identified improvements require capital expenditure. KW - Bauwerk KW - Datenmanagement KW - Baustelle KW - Controlling Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1308 ER - TY - CHAP A1 - Petzold, Frank A1 - Donath, Dirk T1 - The building as a container of information : the starting point for project development and design formulation N2 - For planning in existing built contexts, the building survey is the starting point for initial planning proposals, for the diagnosis and documentation of building damages, for the creation of objectives catalogues, for the detailed design of renovation and conversion measures and for ensuring fulfilment of building legislation, particularly by change of use and refitting. An examination of currently available IT-tools shows insufficient support for planning within existing contexts, most notably a deficit with regard to information capture and administration. This paper discusses the concept for a modular surveying system (basic concept, separation of geometry from semantic data, and separation into sub-systems) and the prototypical realisation of a system for the complete support of the entire building surveying process for existing buildings. The project aims to contribute to the development of a planning system for existing buildings. ... KW - Architektur KW - Verteiltes System KW - Lebenszyklus KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1848 ER - TY - JOUR A1 - Volkova, Viktorija T1 - The analysis of dynamic behaviour of pre-stressed systems under polyharmonic excitations N2 - Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application. KW - Verkehrsplanung KW - Simulation KW - Baukonstruktion KW - Dynamische Belastung KW - Tragwerk / Vorspannung KW - Vorgespannte Konstruktion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2656 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Tag des Baubetriebs 2004 - Tagungsbeiträge "Planungshaftung in der Bauausführung" N2 - Beiträge zum Tag des Baubetriebs „Planungshaftung in der Bauausführung“ am 16 März 2004 in Weimar der Professur für Baubetrieb und Bauverfahren an der Bauhaus-Universität Weimar. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 06 KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Bauausführung KW - Planungshaftung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081126-14490 ER - TY - CHAP A1 - Bürgy, Christian A1 - Garrett, James H. T1 - Supporting Domain Experts in Determining Viable User Interface Designs for Wearable Computers Used in AEC Work Situations N2 - The design of mobile IT systems, especially the design of wearable computer systems, is a complex task that requires computer science knowledge, such as that related to hardware configuration and software development, in addition to knowledge of the domain in which the system is intended to be used. Particularly in the AEC sector, it is necessary that the support from mobile information technology fit the work situation at hand. Ideally, the domain expert alone can adjust the wearable computer system to achieve this fit without having to consult IT experts. In this paper, we describe a model that helps in transferring existing design knowledge from non-AEC domains to new projects in the construction area. The base for this is a model and a methodology that describes the usage scenarios of said computer systems in an application-neutral and domain-independent way. Thus, the actual design information and experience will be transferable between different applications and domains. KW - Mobile Computing KW - Funknetz KW - Benutzeroberfläche KW - Mensch-Maschine-Kommunikation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1168 ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Bilek, Jochen T1 - Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures N2 - Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent–peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1481 ER - TY - JOUR A1 - Ke, Chen A1 - Jian Ming, Lu T1 - Study of Analysis System for Bridge Test N2 - Analysis System for Bridge Test (Chinese name abbr.: QLJC) is an application software specially designed for bridge test to analyze the static and dynamic character of bridge structures, calculate efficiency ratio of load test, pick up the results of observation points and so on. In this paper, research content, system design, calculation theory, characteristics and practical application of QLJC is introduced in detail. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Brückenbau KW - Straßenbrücke Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2547 ER - TY - CHAP A1 - Xie, Haiyan A1 - Issa, Raja A1 - O'Brien, William T1 - Structure of a Formal User Model for Construction Information Retrieval N2 - Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction. KW - Bauwerk KW - Datenmanagement KW - Benutzeroberfläche Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1296 ER - TY - CHAP A1 - König, Markus A1 - Klinger, Axel A1 - Berkhahn, Volker T1 - Structural Correctness of Planning Processes in Building Engineering N2 - The planning of projects in building engineering is a complex process which is characterized by a dynamical composition and many modifications during the definition and execution time of processes. For a computer-aided and network-based cooperation a formal description of the planning process is necessary. In the research project “Relational Process Modelling in Cooperative Building Planning” a process model is described by three parts: an organizational structure with participants, a building structure with states and a process structure with activities. This research project is part of the priority program 1103 “Network-Based Cooperative Planning Processes in Structural Engineering” promoted by the German Research Foundation (DFG). Planning processes in civil engineering can be described by workflow graphs. The process structure describes the logical planning process and can be formally defined by a bipartite graph. This structure consists of activities, transitions and relationships between activities and transitions. In order to minimize errors at execution time of a planning process a consistent and structurally correct process model must be guaranteed. This contribution considers the concept and the algorithms for checking the consistency and the correctness of the process structure. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Planungsprozess KW - Konsistenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1690 ER - TY - CHAP A1 - Perevalova, Julia A1 - Pahl, Peter Jan T1 - Structural and Functional Dependence of Objects in Data Bases N2 - Let the information of a civil engineering application be decomposed into objects of a given set of classes. Then the set of objects forms the data base of the application. The objects contain attributes and methods. Properties of the objects are stored in the attributes. Algorithms which the objects perform are implemented in the methods of the objects. If objects are modified by a user, the consistency of data in the base is destroyed. The data base must be modified in an update to restore its consistency. The sequence of the update operations is not arbitrary, but is governed by dependence between the objects. The situation can be described mathematically with graph theory. The available algorithms for the determination of the update sequence are not suitable when the data base is large. A new update algorithm for large data bases has been developed and is presented in this paper. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Objektorientierung KW - Datenbank Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1683 ER - TY - JOUR A1 - Fink, Thomas T1 - Structural analysis, design and detailing using standard CAD software and standard building information model N2 - This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models. KW - Bauindustrie KW - CAD KW - Bauwerk KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2702 ER - TY - JOUR A1 - Romberg, Richard A1 - Niggl, Andreas A1 - van Treeck, Christoph T1 - Structural Analysis based on the Product Model Standard IFC N2 - In this paper we present a computer aided method supporting co-operation between different project partners, such as architects and engineers, on the basis of strictly three-dimensional models. The center of our software architecture is a product model, described by the Industry Foundation Classes (IFC) of the International Alliance for Interoperability (IAI). From this a geometrical model is extracted and automatically transferred to a computational model serving as a basis for various simulation tasks. In this paper the focus is set on the advantage of the fully three-dimensional structural analysis performed by p-version of the finite element analysis. Other simulation methods are discussed in a separate contribution of this Volume (Treeck 2004). The validity of this approach will be shown in a complex example. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Statik KW - Standard Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2433 ER - TY - CHAP A1 - Changwan, Kim A1 - Haas, Carl A1 - Caldas, Carlos T1 - Spatial data acquisition, integration, and modeling for real-time project life-cycle applications N2 - Current methods for site modeling employs expensive laser range scanners that produce dense point clouds which require hours or days of post-processing to arrive at a finished model. While these methods produce very detailed models of the scanned scene, useful for obtaining as-built drawings of existing structures, the associated computational time burden precludes the methods from being used onsite for real-time decision-making. Moreover, in many project life-cycle applications, detailed models of objects are not needed. Results of earlier research conducted by the authors demonstrated novel, highly economical methods that reduce data acquisition time and the need for computationally intensive processing. These methods enable complete local area modeling in the order of a minute, and with sufficient accuracy for applications such as advanced equipment control, simple as-built site modeling, and real-time safety monitoring for construction equipment. This paper describes a research project that is investigating novel ways of acquiring, integrating, modeling, and analyzing project site spatial data that do not rely on dense, expensive laser scanning technology and that enable scalability and robustness for real-time, field deployment. Algorithms and methods for modeling objects of simple geometric shape (geometric primitives from a limited number of range points, as well as methods provide a foundation for further development required to address more complex site situations, especially if dynamic site information (motion of personnel and equipment). Field experiments are being conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach. KW - Bauwerk KW - Datenmanagement KW - Echtzeitsystem KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1280 ER - TY - CHAP A1 - Beyer, Hartmut T1 - Sondervorschläge und Alternativen mit allen Konsequenzen N2 - Der Verfasser begründet zunächst die aktive Erarbeitung von Sondervorschlägen und Alternativen. Im zweiten Abschnitt erfolgt die inhaltliche Strukturierung der Nebenangebote. Im Folgenden werden die Probleme beim Durchsetzen der Sondervorschläge bei der öffentlichen Hand und privaten Auftraggebern und als Alternative dazu das STRABAG teamconcept beschrieben. Im letzten Bereich wird die Verantwortung des Bauunternehmens unterstrichen und ein positives Resümee gezogen. KW - Baubetriebslehre KW - Ausschreibung KW - Öffentlicher Auftrag / Vergabe KW - Angebot KW - Angebotsbearbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7207 ER - TY - CHAP A1 - Reinhardt, Jan A1 - Garrett, James H. A1 - Akinci, Burcu T1 - SiDaCoS: Product and Process Models on Construction Sites N2 - Site superintendents performing project management tasks on construction sites need to access project documents and need to collect information that they observe while inspecting the site. Often, information that is observed on a construction site needs to be integrated into electronic documents or project control systems. In the future, we expect integrated product and process models to be the medium for storing and handling construction project management information. Even though mobile computing devices today are already capable of storing and handling such integrated product and process data models, the user interaction with such large and complex models is difficult and not adequately addressed in the existing research. In this paper, we introduce a system that supports project management tasks on construction sites effectively and efficiently by making integrated product and process models accessible. In order to effectively and efficiently enter or access information, site superintendents need visual representations of the project data that are flexible with respect to the level of detail, the decomposition structure, and the type of visual representation. Based on this understanding of the information and data collection needs, we developed the navigational model framework and the application Site Data Collection System (SiDaCoS), which implements that framework. The navigational model framework allows site superintendents to create customized representations of information contained in a product and process model that correspond to their data access and data collection needs on site. KW - Mobile Computing KW - Funknetz KW - Baustelle KW - Controlling KW - data collection KW - construction management KW - product and process models KW - system KW - Work Face Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1156 ER - TY - CHAP A1 - Lehner, Karlheinz A1 - Hartmann, Dietrich T1 - Scenarios for the deployment of distributed engineering applications N2 - Although there are some good reasons to design engineering software as a stand-alone application for a single computer, there are also numerous possibilities for creating distributed engineering applications, in particular using the Internet. This paper presents some typical scenarios how engineering applications can benefit from including network capabilities. Also, some examples of Internet-based engineering applications are discussed to show how the concepts presented can be implemented. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1476 ER - TY - JOUR A1 - Likhitruangsilp, Veerasak A1 - Ioannou, Photios T1 - Risk-sensitive Markov Decision Process for Underground Construction Planning and Estimating N2 - This paper presents an application of dynamic decision making under uncertainty in planning and estimating underground construction. The application of the proposed methodology is illustrated by its application to an actual tunneling project—The Hanging Lake Tunnel Project in Colorado, USA. To encompass the typical risks in underground construction, tunneling decisions are structured as a risk-sensitive Markov decision process that reflects the decision process faced by a contractor in each tunneling round. This decision process consists of five basic components: (1) decision stages (locations), (2) system states (ground classes and tunneling methods), (3) alternatives (tunneling methods), (4) ground class transition probabilities, and (5) tunneling cost structure. The paper also presents concepts related to risk preference that are necessary to model the contractor’s risk attitude, including the lottery concept, utility theory, and the delta property. The optimality equation is formulated, the model components are defined, and the model is solved by stochastic dynamic programming. The main results are the optimal construction plans and risk-adjusted project costs, both of which reflect the dynamics of subsurface construction, the uncertainty about geologic variability as a function of available information, and the contractor’s risk preference. KW - Mehragentensystem KW - Lernendes System KW - Tunnel KW - Markowschke KW - Kette Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2247 ER - TY - CHAP A1 - Keller, Martin A1 - Antoniadis, George A1 - Menzel, Karsten T1 - Resource Management for the Construction Industry N2 - The management of resources is an essential task in each construction company. Today, ERP systems and e-Business systems are available to assist construction companies to efficiently organise the allocation of their personnel and equipment within the company, but they cannot provide the company with the idle resources for every single task that has to be performed during a construction project. Therefore, companies should have an alternative solution to better exploit expensive resources and compensate their fixed costs, but also have them available at the right time for their own business activities. This paper outlines the approach taken by the EU funded project “e-Sharing” (IST-2001-33325) to support resource management between construction companies. It will describe requirements for the management of construction resources, its core features, and the integration approach. Therefore, we will outline the approach of an integrated resource type model supporting the management and classification of construction equipment, construction tasks and qualification profiles. The development is based on a cross-domain analysis and evaluation of existing models. ... KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Betriebsmittel Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1679 ER - TY - JOUR A1 - Takagi, Kousuke A1 - Tani, Akinori A1 - Kawamura, Hiroshi T1 - Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces N2 - Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified. KW - Mehragentensystem KW - Lernendes System KW - Fuzzy-Logik KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2238 ER - TY - JOUR A1 - Osada, Teppei A1 - Koike, Hirotaka A1 - Morimoto, Akinori T1 - Research on Establishment of a Standard of Traffic Impact Assessment with Integrated Database System N2 - Planning support systems, such as geographical information system (GIS) and traffic flow simulation models, are widely in use in recent urban planning research. In this paper we propose a method to apply traffic impact assessment (TIA) to large-scale, commercial developments. In TIA research we often encounter the problem of increasing amount of data that is necessary for detailed investigation and analysis, as the scale of commercial developments become larger and more complex. As a result, TIA presents two problems. The first problem is the difficulty of data acquisition. The second problem is the reliability of data. As a solution, we developed an integrated database system. KW - Verkehrsplanung KW - Simulation KW - Datenbanksystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2647 ER - TY - JOUR A1 - Gong, Dejun A1 - Huang, Limang A1 - Chen, Xi T1 - Research and Application on Highway Construction Visual Management Information System based on the Network and GIS N2 - The paper introduced the research and application of the highway construction management information integrated system. Explained the development and application of highway survey applet run on mobile telephone supporting Java and the technique of transmitting engineering data by GPRS wireless network technology. And expounded the development and application of highway engineering construction field data collecting software run on Pocket-PC. Recommended the technique of engineering long distance data transmitting based on C/S structure adopting VPN (Virtual Private Networks) technology. Especially expatiated on the research on the platform of highway construction management information integrated system adopting geography information system (GIS) technique, database technique and network technique. And said all to subsystem about bid manage, contract management, engineering design drawing, engineering survey calculation, measure and pay, data processing on engineering experiment, quantity assessing, project plan and progress, engineering document management etc. Besides? proposed highway construction project visual analysis and inquiry system based on Web-GIS; Explained the research and application of highway engineering construction OA based on B/S structure; real-time workflow and information processing such as the management of administration, business and procedure of authorization and information distribution. At last, the author described the prospect of the application of C/S and B/S structure in trade software development in the highway construction management. KW - Geoinformationssystem KW - Straßenbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2661 ER - TY - JOUR A1 - Kiviniemi, Arto A1 - Fischer, Martin T1 - Requirements Management Interface to Building Product Models N2 - In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Bauwerk KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2427 ER -