TY - CHAP A1 - Changwan, Kim A1 - Haas, Carl A1 - Caldas, Carlos T1 - Spatial data acquisition, integration, and modeling for real-time project life-cycle applications N2 - Current methods for site modeling employs expensive laser range scanners that produce dense point clouds which require hours or days of post-processing to arrive at a finished model. While these methods produce very detailed models of the scanned scene, useful for obtaining as-built drawings of existing structures, the associated computational time burden precludes the methods from being used onsite for real-time decision-making. Moreover, in many project life-cycle applications, detailed models of objects are not needed. Results of earlier research conducted by the authors demonstrated novel, highly economical methods that reduce data acquisition time and the need for computationally intensive processing. These methods enable complete local area modeling in the order of a minute, and with sufficient accuracy for applications such as advanced equipment control, simple as-built site modeling, and real-time safety monitoring for construction equipment. This paper describes a research project that is investigating novel ways of acquiring, integrating, modeling, and analyzing project site spatial data that do not rely on dense, expensive laser scanning technology and that enable scalability and robustness for real-time, field deployment. Algorithms and methods for modeling objects of simple geometric shape (geometric primitives from a limited number of range points, as well as methods provide a foundation for further development required to address more complex site situations, especially if dynamic site information (motion of personnel and equipment). Field experiments are being conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach. KW - Bauwerk KW - Datenmanagement KW - Echtzeitsystem KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1280 ER - TY - CHAP A1 - Petersen, Michael A1 - Seewald, Gerrit T1 - Establishing of fundamentals in building projects using web services N2 - During the establishing of fundamentals in a building project a huge amount of influence factors and boundary conditions have to be investigated in order to provide the prerequisites for further planning processes. These investigative tasks are often related with a great effort concerning time and money, because there are no standardized workflows and interfaces which provide an efficient access to the necessary information related to a specific construction site. Within the fundamental investigation human and natural circumstances have to be taken into account. Thus, in this project two examples have been chosen in order to demonstrate the holistic approach for an integration and provision of georeferenced information. The developed internet-site http://www.grundlagenermittlung.de has been designed to support architects and civil engineers in early planning phases of a building project efficiently. It offers web-based services based on dynamic interfaces for a flexible search and collection of information concerning the building site. Therefore, a central Metadatabase-Server for Description, Discovery and Integration has been established which enables a registration of georeferenced services and the redirection of incoming requests to other, distributed data pools. Using this Yellow-Page concept in combination with the underlying meta-data based on the ISO 19115 standard an efficient investigation of geographical and environmental information becomes possible. KW - Bauwerk KW - Datenmanagement KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1273 ER - TY - CHAP A1 - Pavlov, Alexander T1 - Data Transfer and Objects Recognition in Building Design N2 - The problem of data interoperability is now very important. The formal description of construction systems and objects must base upon the modeling for the description of construction data domain. The XML-language was selected as a basis of a universal data format, ensuring natural hierarchy of objects, flexibility, good layout and expandability. The language, developed by the author, is called Building Object Description Extensible Markup Language (bodXML). The types of all objects used by data transfer should be definite beforehand with existing methods of programming. It limits the possibilities of IT in application of new types. But the recipient software must recognize the building objects even if the kind of object is unknown at the outset. The author offers a set of main topological and geometric properties being sufficient for recognition of main three-dimensional building constructions with flat edges. The tests of artificial neuron network have shown that the recognition of a kind of the constructions represented as a set of indicated parameters happens enough confidently. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1265 ER - TY - CHAP A1 - Liu, Liang A1 - Soibelman, Lucio A1 - Wu, Jianfeng T1 - Data Fusion and Modeling for Construction Management Knowledge Discovery N2 - Advances in construction data analysis techniques have provided useful tools to discover explicit knowledge on historical databases supporting project managers’ decision making. However, in many situations, historical data are extracted and preprocessed for knowledge discovery based on time-consuming and problem-specific data preparation solutions, which often results in inefficiencies and inconsistencies. To overcome the problem, we are working on the development of a new data fusion methodology, which is designed to provide timely and consistent access to historical data for efficient and effective management knowledge discovery. The methodology is intended to be a new bridge between historical databases and data analysis techniques, which shields project managers from complex data preparation solutions, and enables them to use discovered knowledge for decision making more conveniently. This paper briefly describes the motivation, the background and the initial results of the ongoing research. KW - Bauwerk KW - Datenmanagement KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1254 ER - TY - CHAP A1 - Jianping, Zhang A1 - Tianyi, Ma A1 - Qiping, Shen T1 - Application of Data Warehouse and Data Mining in Construction Management N2 - All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1247 ER - TY - CHAP A1 - Cheung, Moe M. S. A1 - Noruziaan, Bahman A1 - Li, W. C. T1 - Data acquisition, processing and management systems for a Canadian bridge monitoring project N2 - This paper will present a number of technical aspects for one of the most elaborate instrumentation and data acquisition projects ever undertaken in Canada. Confederation Bridge, the longest bridge built over ice covered seawater has been equipped with the state of the art data acquistition devices and systems as well as data transfer networks. The Bridge has been providing a fixed surface connection between Prince Edward Island and Province of New Brunswick in Canada since its opening in 1997. The Bridge has a rather long design service life of 100 years. Because of its large size and long span length, its design is not covered by any existing codes or standards worldwide. The focus of the paper is to introduce the data acquisition, transfer, processing and management systems. The instrumentation and communications infrastructure and devices will be presented in some details along with the data processing and management systems and techniques. Teams of engineers and researchers use the collected data to verify the analysis and design assumptions and parameters as well as investigate the short-term and long-term behaviour and health of the Bridge. The collected data are also used in furthering research activities in the field of bridge engineering and in elevating our knowledge about behaviour, reliability and durability of such complex structures, their components and materials. KW - Bauwerk KW - Datenmanagement KW - Brückenbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1235 ER - TY - CHAP A1 - Ma, Zhiliang A1 - Wong, K. D. A1 - Yang, Jun T1 - An Approach to Utilizing Exchanged Documents in Construction Projects Based on Data Warehouse Technology N2 - There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept KW - Exchanged Documents KW - Managment Information System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1227 ER - TY - CHAP A1 - Both, Petra von A1 - Kohler, Niklaus A1 - Gessmann, Robin T1 - A virtual life cycle structured platform for building applications N2 - The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data. KW - Bauwerk KW - Datenmanagement KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1219 ER - TY - CHAP A1 - Schapke, Sven-Eric A1 - Scherer, Raimar J. T1 - A Four Layer Bayesian Network for Product Model Based Information Mining N2 - Business and engineering knowledge in AEC/FM is captured mainly implicitly in project and corporate document repositories. Even with the increasing integration of model-based systems with project information spaces, a large percentage of the information exchange will further on rely on isolated and rather poorly structured text documents. In this paper we propose an approach enabling the use of product model data as a primary source of engineering knowledge to support information externalisation from relevant construction documents, to provide for domain-specific information retrieval, and to help in re-organising and re-contextualising documents in accordance to the user’s discipline-specific tasks and information needs. Suggested is a retrieval and mining framework combining methods for analysing text documents, filtering product models and reasoning on Bayesian networks to explicitly represent the content of text repositories in personalisable semantic content networks. We describe the proposed basic network that can be realised on short-term using minimal product model information as well as various extensions towards a full-fledged added value integration of document-based and model-based information. KW - Bauwerk KW - Datenmanagement KW - Produktmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1207 ER - TY - CHAP A1 - O'Brien, William A1 - Danso-Amoako, Mark A1 - Issa, Raja T1 - A Case Study of IFC and CIS/2 Support for Steel Supply Chain Processes N2 - The evolution of data exchange and integration standards within the Architectural, Engineering and Construction industry is gradually making the long-held vision of computer-integratedconstruction a reality. The Industry Foundations Classes and CIMSteel Integration Standards are two such standards that have seen remarkable successes over the past few years. Despite successes, these standards support the exchange of product data more than they do process data, especially those processes that are loosely coupled with product models. This paper reports on on-going research to evaluate the adequacy of the IFC and CIS/2 standards to support process modeling in the steel supply chain. Some initial recommendations are made regarding enhancements to the data standards to better support processes. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1195 ER - TY - CHAP A1 - Parmee, Ian A1 - Abraham, Johnson T1 - User-centric Evolutionary Design Systems - the Visualisation of Emerging Multi-Objective Design Information N2 - The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers. KW - Konzipieren KW - Bauwerk KW - Künstliche Intelligenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1094 ER - TY - CHAP A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Object Oriented Finite Element Analysis for Structural Optimization using p-Elements N2 - The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed. KW - Konzipieren KW - Bauwerk KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1089 ER - TY - CHAP A1 - Peng, Jun A1 - Law, Kincho A1 - Lau, Gloria T1 - Internet-Enabled Software Model for Nonlinear Structural Analysis and Simulations N2 - This paper describes an Internet-enabled software model that could facilitate the development and utilization of nonlinear structural analysis programs. The software model allows users easy access to the analysis core program and the analysis results by using a web-browser or other application programs. In addition, new and legacy codes can be incorporated as distributed services and be integrated with the software framework from disparate sites. A distributed project management system, taking advantages of Internet and database technologies, is implemented to store and manage model information and simulation results. Nonlinear dynamic analysis and simulations of a bridge structure is performed to illustrate the facilities of the Internet-enabled software model. KW - Konzipieren KW - Bauwerk KW - Verteiltes System KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1057 ER - TY - CHAP A1 - Asayama, Shuichi A1 - Mae, Toshifumi T1 - Fractal Truss Structure and Automatic Form Generation Using Iterated Function System N2 - This paper describes a couple of new truss structures based on fractal geometry. One is the famous Sierpinski Gasket and another is a fractal triangle derived by means of applying a process forming leaves of a cedar tree using M. F. Barnsley’s contraction mapping theory. Therefore a pair of x-y coordinates of an arbitrary nodal point on the structures are generated easily if IFS(Iterated Function System) codes and a scale of them are specified. Structural members are defined similarly. Thus data for frame analysis can be generated automatically, which is significant if the objective structure has complex configuration. Next analytical results under vertical and wind loadings in Japanese Building Code are shown. Here members are assumed to be timber and to have cross section of 15cm×15cm. Finally authors conclude that geometrically new truss structures were developed and automatic data generation for frame analysis was attained using IFS. Analytical results show they contribute to saving material when compared it with King-post truss. KW - Konzipieren KW - Bauwerk KW - Fraktal Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1046 ER - TY - CHAP A1 - Wellmann Jelic, Andres A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Distributed computing of failure probabilities for structures in civil engineering N2 - In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server. KW - Konzipieren KW - Bauwerk KW - Verteiltes System KW - Fehler KW - Stochastik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1030 ER - TY - CHAP A1 - Raue, Erich A1 - Weitzmann, Rüdiger T1 - Analysis and Design of Hybrid Structures using Optimization Strategies N2 - The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes. KW - Konzipieren KW - Bauwerk KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1023 ER - TY - CHAP A1 - Bédard, Claude A1 - Mora, Rodrigo A1 - Rivard, Hugues T1 - A Framework for Computer-Aided Conceptual Design of Building Structures N2 - This paper describes a framework for computer-aided conceptual design of building structures that results from building architectural considerations. The central task that is carried out during conceptual design is the synthesis of the structural system. This paper proposes a methodology for the synthesis of structural solutions. Given the nature of architectural constraints, user-model interactivity is devised as the most suitable computer methodology for driving the structural synthesis process. Taking advantage of the hierarchical organization of the structural system, this research proposes a top-down approach for structural synthesis. Through hierarchical refinement, the approach lends itself to the synthesis of global and local structural solutions. The components required for implementing the proposed methodology are briefly described. The main components have been incorporated in a proof-of-concept prototype that is being tested and validated with actual buildings. KW - Konzipieren KW - Bauwerk KW - Software Engineering Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1018 ER - TY - THES A1 - Hauschild, Thomas T1 - Computer Supported Cooperative Work-Applikationen in der Bauwerksplanung auf Basis einer integrierten Bauwerksmodellverwaltung T1 - Computer Supported Cooperative Work Applications for the Design of Buildings based on an integrated Building Model Management N2 - Gegenstand der vorliegenden Arbeit ist die Konzeption und prototypische Umsetzung von Techniken des Computer Supported Cooperative Work (CSCW) im Rahmen einer integrierten objektorientierten und dynamischen Bauwerksmodellverwaltung zur Unterstützung der Bauwerksplanung. Die Planung von Bauwerken ist durch einen hohen Grad an Arbeitsteiligkeit, aber auch durch eine schwache Strukturierung der ablaufenden Prozesse gekennzeichnet. Besonders durch den Unikatcharakter des Planungsgegenstands \'Bauwerk\' ergeben sich signifikante Unterschiede zum Entwurf anderer, durch Serienfertigung produzierter Industriegüter. Zunehmend wird die Planung von Bauwerken in Virtual Enterprises ausgeführt, die sich durch eine dynamische Organisationsstruktur, geographische Verteilung der Partner, schwer normierbare Informationsflüsse und eine häufig stark heterogene informationstechnische Infrastruktur auszeichnen. Zur rechnerinternen Repräsent! ation des Planungsgegenstands haben sich objektorientierte Bauwerksmodelle bewährt. Aufgrund der Veränderlichkeit der Bauwerke und deren rechnerinterner Repräsentation im Laufe des Bauwerkslebenszyklus ist eine dynamische Anpassung der Modelle unumgänglich. Derartige in Form von Taxonomien dargestellte dynamische Bauwerksmodellstrukturen können gemeinsam mit den in Instanzform vorliegenden konkreten Projektinformationen in entsprechenden Modellverwaltungssystemen (MVS) gehandhabt werden. Dabei wird aufgrund der Spezialisierung und Arbeitsteilung im Planungsprozess von einer inhaltlich verknüpften Partialmodellstruktur, die räumlich verteilt sein kann, ausgegangen. Die vorgeschlagenen Methoden zur Koordinierung der Teamarbeit in der Bauwerksplanung beruhen auf der Nutzung von CSCW–Techniken für \'Gemeinsame Informationsräume\' und \'Workgroup Computing\', die im Kontext der als Integrationsbasis fungierenden Modellverwaltungssysteme umgesetzt werden. Dazu werden die zur d! ynamischen Bauwerksmodellierung erforderlichen Metaebenenfunk! tionalitäten sowie Ansätze zur Implementierung von Modellverwaltungskernen systematisiert. Ebenso werden notwendige Basistechniken für die Realisierung von MVS untersucht und eine Architektur zur rollenspezifischen Präsentation dynamischer Modellinhalte vorgestellt. Da klassische Schichtenmodelle nicht auf die Verhältnisse in Virtual Enterprises angewendet werden können, wird eine physische Systemarchitektur mit einem zentralen Projektserver, Domänenservern und Domänenclients vorgestellt. Ebenso werden Techniken zur Sicherung des autorisierten Zugriffs sowie des Dokumentencharakters beschrieben. Zur Unterstützung der asynchronen Phasen der Kooperation wird der gemeinsame Informationsraum durch Mappingtechniken zur Propagation und Notifikation von Änderungsdaten bezüglich relevanter Modellinformationen ergänzt. Zur Unterstützung synchroner Phasen werden Techniken zur Schaffung eines gemeinsamen Kontexts durch relaxierte WYSIWIS–Präsentationen auf Basis der Modellinformationen! verbunden mit Telepresence–Techniken vorgestellt. Weiterhin werden Methoden zur Sicherung der Group–Awareness für alle Kooperationsphasen betrachtet. N2 - The thesis covers the conceptual design and the prototypical realisation of Computer Supported Cooperative Work (CSCW)– techniques within the scope of an integrated, object-oriented, dynamic model management system for the support of building planning activities. The planning of buildings is characterised by a high degree of collaboration but by a weak structuring of the processes, too. Significant differences between the design of buildings and industrial goods produced by series production are implied by the uniqueness of a building. Increasingly, the planning of buildings is accomplished by Virtual Enterprises. These are characterised by a dynamic organisation structure, geographic dispersion of the involved planning experts, information flows, which are hard to standardise, and a frequently very heterogeneous information-technology infrastructure. Object oriented building models have proven to be a suitable base for! the binary representation of planning subject information. Due to the changeability of both building structures and their binary representation during the building life cycle, a dynamical adaptation of the models is indispensable. Dynamic building models, which are represented by taxonomic information, can be handled together with actual project information, which is stored in taxonomy instances within an appropriate model management system. Due to the specialisation and the division of labour in the planning process, a semantic linked but spatial distributed partial model structure is applied. The recommended methods for the coordination of teamwork in the planning process are based on the application of CSCW-techniques for \'Shared Information Spaces\' and \'Workgroup Computing\' in the context of model management systems acting as an foundation for planning information integration. The required meta level functionalities for dynamic building modelling and appropriate! implementation approaches for modelling kernels are systemat! ised. The necessary base techniques for the realisation of model management systems are explored. An architecture for the role specific presentation of dynamic model content is introduced, too. Due to the inadequacy of conventional multi-tier models for an application in Virtual Enterprises, an appropriate physical system architecture with a central project server, domain servers and domain clients is introduced. The thesis covers techniques, which ensure the authorised access to information and the authenticity of planning documents, too. For an adequate support of the asynchronous phases of collaboration, the Shared Information Space is supplied with mapping mechanisms for the propagation and user notification of changes in the relevant planning information. Synchronous collaboration can be performed by means of relaxed WYSIWIS-presentations connected with telepresence mechanisms in order to create a shared context for the planners. Furthermore, methods for the provis! ion of group-awareness for all co-operation phases are treated. KW - Computer Supported Cooperative Work KW - Groupware KW - Bauwerk KW - Modellierung KW - Virtuelles Unternehmen KW - Verteiltes System KW - Domänenmodelle KW - Kooperatives Arbeiten KW - CSCW KW - Dynamische Modellverwaltungssysteme KW - Dynamische Schemaevolution KW - Building Modelling KW - Domain Models KW - Co-operative Work KW - Dynamic Model Management Systems KW - Dynamic Schema Evolution Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040311-672 ER - TY - THES A1 - Willenbacher, Heiko T1 - Interaktive verknüpfungsbasierte Bauwerksmodellierung als Integrationsplattform für den Bauwerkslebenszyklus T1 - Interactive link-based building modelling as an integration platform for the building life cycle N2 - Den Gegenstand der Dissertation bilden die Konzeption und die exemplarische Realisierung eines verknüpfungsbasierten Bauwerksmodellierungsansatzes zur Schaffung einer integrierenden Arbeits- und Planungsumgebung für den Lebenszyklus von Bauwerken. Die Basis der Integration bildet ein deklarativ ausgerichteter Bauwerksmodellverbund bestehend aus abstrahierten, domänenspezifischen Partialmodellen. Auf Grund der de facto existierenden Dynamik im Bauwerkslebenszyklus werden sowohl der Bauwerksmodellverbund als auch die einzelnen Partialmodelle dynamisch modifizierbar konzipiert und auf Basis spezieller Modellverwaltungssysteme technisch realisiert. Die Verständigung innerhalb der vorgeschlagenen Gesamtbauwerksmodellarchitektur basiert auf anwenderspezifisch zu erstellenden Verknüpfungen zwischen den Partialmodellen und wird im Sinne einer hybriden Modellarchitektur durch eine zentrale, die Verknüpfungen verwaltende Komponente koordiniert. Zur Verwaltung und Abarbeitung der Verknüpfungen wird der Einsatz von Softwareagenten im Rahmen eines Multiagentensystems vorgeschlagen und diskutiert. N2 - The subject of this thesis is the conception and the exemplary realisation of a link-based building modelling approach for the creation of an integrating work and planning environment for the life cycle of buildings. The basis of the integration forms a declarative aligned building model compound consisting of abstract, domain-specific partial models. Due to the in fact existing dynamics in the building life cycle, both the building model compound and the individual partial models are dynamically modifiable. The communication within the suggested total building model architecture is based on specific links provided by users between the partial models. This link-based communication is co-ordinated in the sense of a hybrid model architecture by a central, the links administering component. For the administration and processing of the links, a multiagent-system is suggested. KW - Bauwerk KW - Modellierung KW - Produktlebenszyklus KW - Planungsprozess KW - Mehragentensystem KW - Partialmodelle KW - Integration KW - Bauwerkslebenszyklus KW - Dynamik KW - Verknüpfungen KW - building modelling KW - partial models KW - building life cycle KW - dynamics KW - links Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040216-328 ER - TY - CHAP A1 - Schultmann, Frank T1 - Projektplanungsmodelle und -methoden für den Rückbau von Bauwerken N2 - Vor dem Hintergrund einer sich verschärfenden Umweltgesetzgebung sowie der Erkenntnis, dass Bauabfälle sich grundsätzlich für eine Stoffkreislaufführung eignen, hat der Rückbau von Bauwerken in den letzten Jahren verstärkt an Bedeutung gewonnen. Aufgrund oftmals strenger Zeit- und Kostenvorgaben für einen Rückbau, begrenzter Verfügbarkeit von Personal und Betriebsmitteln, einer weitgehenden Unikatfertigung sowie wechselnder Standorte kommt dabei der projektorientierten Planung von Maßnahmen auf der Baustelle große Bedeutung zu. Im Rahmen des Beitrages werden Ansätze zur Modellierung und Lösung der sich hieraus ergebenden Probleme zur Planung und Optimierung von (Rück-) Bauabläufen unter Verwendung von Projektplanungsmodellen und -methoden vorgestellt. Hierbei werden neben betriebswirtschaftlichen auch umweltrelevante sowie technische Fragestellungen im Zusammenhang mit der Planung von Rückbauprojekten aufgegriffen. Eine Anwendung der Planungsansätze auf reale Gebäude zeigt, dass sich durch Kombination von Gebäuderückbau und Aufbereitungstechnik eine Qualitätsverbesserung von Recyclingbaustoffen erzielen lässt. Zur Umsetzung der hierzu erforderlichen Maßnahmen werden unter Berücksichtigung individueller abfallwirtschaftlicher Rahmenbedingungen der jeweiligen Planungsregion, gebäude- und baustellenbezogener Besonderheiten, technischer sowie kapazitiver Restriktionen Ablaufpläne für den Gebäuderückbau berechnet. Die für unterschiedliche Planungsregionen vorgenommenen Modellrechnungen weisen nach, dass sich die Demontage von Gebäuden gegenüber einem konventionellen Gebäudeabbruch unter bestimmten Rahmenbedingungen bereits wirtschaftlich vorteilhaft realisieren lässt. Abgerundet wird der Beitrag durch einen Ausblick auf Möglichkeiten einer Realisierung komplexer Bauabläufe auch unter strengen Zeitvorgaben sowie bei begrenzten Platzverhältnissen mit Hilfe fertigungssynchroner Ressourceneinsatzplanung sowie auf die Berücksichtigung von Unsicherheiten in der Planung und Ausführung von Rückbauprojekten. KW - Bauwerk KW - Demontage KW - Bauplanung KW - Bauablauf KW - Stoffkreislauf Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-162 ER - TY - CHAP A1 - Lenzen, Armin A1 - Waller, Heinz T1 - Deterministische und stochastische Systemidentifikation mit Methoden der linearen Algebra zur Formulierung von mathematischen Modellen im Lebensdauerzyklus von Bauwerken N2 - Werden Bauwerke für eine begrenzte Lebensdauer ausgelegt, kann es sinnvoll sein, die Tragfähigkeit von Tragkonstruktionen zu überwachen, um Schäden zu vermeiden und eine sichere Funktionsweise zu gewährleisten. Die Überwachung, hier auf Basis von Schwingungen der Struktur, wird zumeist von einer rechnergestützten Messtechnik automatisch durchgeführt. Der Computer überprüft spezielle physikalische Kennwerte oder Kennfunktionen des Tragwerks auf Veränderungen. Eine Schädigung ruft eine Veränderung hervor. Aufgabe der Systemidentifikation ist es, eine solche Veränderung zu erkennen. Eine Modellbildung kann z.B. auf theoretischer Basis als Finite Element Modellierung, oder als Black Box Modellierung aus Messwerten mit der Methodik der deterministischen oder stochastischen Systemidentifikation vorgenommen werden. In diesem Aufsatz werden die Analyse allgemeiner deterministischer und stochastischer Erregungen und deren Schwingungsantworten zur Modellbildung und Systemidentifikation beschrieben. Als Anwendungsbeispiele für die Bauwerksüberwachung werden Methoden zur Schadens-Erfassung und -Lokalisation vorgestellt. Den Abschluss bilden Ausführungen zur numerischen Modellierung von Windlasten als stochastischen Prozess und der Kopplung dieser Modelle mit finiten Element-Modellen, um eine bessere Abschätzung der Lebensdauer eines Bauwerks schon im Entwurfsprozess zu ermöglichen. KW - Bauwerk KW - Lebenszykluskonzept KW - Langzeitverhalten KW - Systemidentifikation Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-125 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim A1 - Blickling, Arno T1 - Neue Methoden für die bauteilorientierte Ausschreibung und Kalkulation unter Beachtung des Integrated Product Lifecycle Management von Bauwerken N2 - Die Autoren stellen Grundlagen und Methoden zur Erstellung von Ausschreibungen und zur Durchführung der Kalkulation vor, die direkt mit dreidimensionalen Bauteilmodellen arbeiten. Dies trägt dazu bei, den gesamten Lebenszyklus eines Bauwerkes durchgängig über 3-D-Modelle beschreiben zu können. Im ersten Abschnitt werden grundlegende Überlegungen zum Einsatz von PLM/PDM-Technologien im Bauwesen angestellt. Im Anschluß daran wird die herkömmliche Ausschreibungsmethodik analysiert. Die Unterschiede zwischen einem konventionellen Leistungsverzeichnis und einem dreidimensionalen Bauteilkatalog (Objektdatenbank) hinsichtlich der Datenstruktur werden dargestellt. Hieraus abgeleitet werden Methoden und Prozesse bei der Erstellung einer 3-D-Leistungsbeschreibung entwickelt. Dazu wird eine geeignete Benutzer-Schnittstelle eines dreidimensionalen Bauteilkataloges vorgestellt. Schließlich werden praxisrelevante Probleme bei der Verwendung von Bauteilkatalogen erörtert. Ein wesentlicher Baustein ist die Kalkulation. Hier werden Kalkulationsmethoden basierend auf einem zweidimensionalen Leistungsverzeichnis und einem dreidimensionalen Bauteilkatalog miteinander verglichen. Ergänzt wird dies um Lösungen zur Anbindung von elektronischen Marktplätzen an den Bauteilkatalog zum Zweck der Preisbildung. Schließlich wird ein Ausblick gegeben, wie eine Synthese zwischen dreidimensionalem Bauteilkatalog und textlichen Standard-Leistungsbeschreibungen erreicht werden kann. KW - Bauwerk KW - Kalkulation KW - Ausschreibung KW - Bauteil KW - Katalog KW - Dreidimensionales Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-70 ER - TY - THES A1 - Huth, Olaf T1 - Ein adaptiertes Polyreferenz-Verfahren und seine Anwendung in der Systemidentifikation T1 - An adapted Polyreferenz procedure and its application in the system identification N2 - Die vorliegende Arbeit gliedert sich in das Gebiet der Systemidentifikation ein. Besonderes Augenmerk wird auf die Detektion, die Lokalisierung und die Quantifizierung von Systemveränderungen gerichtet. Für diese Ziele werden -basierend auf Schwingungsmessungen- modale Parameter sowie Ein- und Ausgangsgrößen im Frequenzbereich extrahiert. Die in dieser Arbeit entwickelte Adaption des Polyreferenz-Verfahrens beruht auf einer veränderten Bestimmung der Fundamentalmatrix mit Hilfe der verallgemeinerten Singulärwertzerlegung. Eine Vorfilterung, die eine Reduktion der Frequenzanteile im Signal bewirkt, ist dabei Voraussetzung. Diese basiert auf dem Einsatz rekursiver Filtertechiken und der einfachen Singulärwertzerlegung. Als Resultat können modale Parameter auch im Falle, wenn eng benachbarte und verrauschte Signalanteile vorliegen oder nur wenige Mess- und Anregungspunkte zur Verfügung stehen, präzise bestimmt und damit auch sehr geringe Syemveränderungen detektiert werden. Die mit dem adaptierten Polyreferenz-Verfahren extrahierten modalen Parameter werden in der Lokalisierung von Systemveränderungen eingesetzt. Zur Bestimmung modaler Parameter auch an realen Bauwerken wird die Konstruktion eines Impulshammers vorgestellt. Besonderes Gewicht wird dabei auf die Gestaltung des Erregerkraftspektrums gelegt. Die Arbeit enthält eine mögliche Vorgehensweise zum Abgleich von Finite-Elemente Modellen. In vielen praxisnahen Fällen sind weit weniger modale Parameter vorhanden, als freie, zum Abgleich bestimmte Parameter gesucht werden. Das Gleichungssystem ist schlechtgestellt und benötigt eine Regularisierung. Eine andere Möglichkeit zur Korrektur von Rechenmodellen bietet das Projektive Eingangsgrößenverfahren, das auf der Basis unvollständig gemessener Ein- und Ausgangsgrößen arbeitet. In einer Versagenswahrscheinlichkeitsstudie wird die Robustheit des Verfahrens gegenüber! Rauscheinflüssen untersucht N2 - This PhD thesis is related to the field of system identificaton focusing on detection of occurence, localisation and amount assessment of damage. This is done as well by extraction of modal parameters as input- and output residuals from vibration measurements. The presented work describes a developed adaption of the polyreference-procedure. It is based on a determination of the fundamental matrix by using the generalized singular value decomposition. A pre-filtering of the time series which kept the signals in a narrow frequenvy band higly supports this application. Two kinds of filter techniques can be combined: The classical way of recursive filter technique and the tool of the singular value decomposition. Therefore, modal parameters can be determined precisley in different cases if the data are strongly corrupted by noise, only few measuring- and excitation points are available, close-spa! ced frequency parts appear in the signal. This facts allow the detection of small structural changes in dynamic systems. The modal parameters extracted by the adapted polyreference-procedure are applied to localise the damage. For the extraction of modal parameters on real structures the construction of an impact hammer is presented with particular respect to the configuration of the excitation spectra. This work contains a possible way for a finite element model updating. In many relevant cases, if much more free parameters are searched than modal parameters are available, this problem is ill-posed and needs regularisation. The Projective Input Residual Method (PIRM) follows another way to correct computational models. It is operational on the extraction of input- and output residuals. Within a reliability study the robustness of the PIRM against noise influences is investigated. KW - Systemidentifikation KW - Bauwerk KW - Dynamische Belastung KW - Technische Überwachung KW - Langzeitverhalten KW - Modale Parameter KW - Schadensdiagnose KW - Schadensanalyse KW - Strukturdynamik KW - structural dynamics KW - system identification KW - modal parameters KW - fault diagnosis Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040202-34 ER -