TY - CHAP A1 - Miro, Shorash A1 - Hartmann, Dietrich A1 - Schanz, Tom A1 - Zarev, Veselin ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - SYSTEM IDENTIFICATION METHODS FOR GROUND MODELS IN MECHANIZED TUNNELING T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Due to the complex interactions between the ground, the driving machine, the lining tube and the built environment, the accurate assignment of in-situ system parameters for numerical simulation in mechanized tunneling is always subject to tremendous difficulties. However, the more accurate these parameters are, the more applicable the responses gained from computations will be. In particular, if the entire length of the tunnel lining is examined, then, the appropriate selection of various kinds of ground parameters is accountable for the success of a tunnel project and, more importantly, will prevent potential casualties. In this context, methods of system identification for the adaptation of numerical simulation of ground models are presented. Hereby, both deterministic and probabilistic approaches are considered for typical scenarios representing notable variations or changes in the ground model. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27771 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Scheiber, Frank ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - ROBUSTNESS IN CIVIL ENGINEERING - INFLUENCES OF THE STRUCTURAL MODEL ON THE EVALUATION OF THE STRUCTURAL ROBUSTNESS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - The topic of structural robustness is covered extensively in current literature in structural engineering. A few evaluation methods already exist. Since these methods are based on different evaluation approaches, the comparison is difficult. But all the approaches have one in common, they need a structural model which represents the structure to be evaluated. As the structural model is the basis of the robustness evaluation, there is the question if the quality of the chosen structural model is influencing the estimation of the structural robustness index. This paper shows what robustness in structural engineering means and gives an overview of existing assessment methods. One is the reliability based robustness index, which uses the reliability indices of a intact and a damaged structure. The second one is the risk based robustness index, which estimates the structural robustness by the usage of direct and indirect risk. The paper describes how these approaches for the evaluation of structural robustness works and which parameters will be used. Since both approaches needs a structural model for the estimation of the structural behavior and the probability of failure, it is necessary to think about the quality of the chosen structural model. Nevertheless, the chosen model has to represent the structure, the input factors and reflect the damages which occur. On the example of two different model qualities, it will be shown, that the model choice is really influencing the quality of the robustness index. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27845 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Nechytailo, Oleksandr A1 - Horokhov, Yevgen A1 - Kushchenko, Vladimir ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - ANALYSIS OF THE MODE OF DEFORMATION OF THE SUB-PULLEY STRUCTURES ON SHAFT SLOPING HEADGEAR STRUCTURES T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - A numerical analysis of the mode of deformation of the main load-bearing components of a typical frame sloping shaft headgear was performed. The analysis was done by a design model consisting of plane and solid finite elements, which were modeled in the program «LIRA». Due to the numerical results, the regularities of local stress distribution under a guide pulley bearing were revealed and parameters of a plane stress under both emergency and normal working loads were determined. In the numerical simulation, the guidelines to improve the construction of the joints of guide pulleys resting on sub-pulley frame-type structures were established. Overall, the results obtained are the basis for improving the engineering procedures of designing steel structures of shaft sloping headgear. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27826 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Lahmer, Tom A1 - Ghorashi, Seyed Shahram ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - XFEM-BASED CRACK IDENTIFICATION APPLYING REGULARIZING METHODS IN A MULTILEVEL APPROACH T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Many structures in different engineering applications suffer from cracking. In order to make reliable prognosis about the serviceability of those structures it is of utmost importance to identify cracks as precisely as possible by non-destructive testing. A novel approach (XIGA), which combines the Isogeometric Analysis (IGA) and the Extended Finite Element Method (XFEM) is used for the forward problem, namely the analysis of a cracked material, see [1]. Applying the NURBS (Non-Uniform Rational B-Spline) based approach from IGA together with the XFEM allows to describe effectively arbitrarily shaped cracks and avoids the necessity of remeshing during the crack identification problem. We want to exploit these advantages for the inverse problem of detecting existing cracks by non-destructive testing, see e.g. [2]. The quality of the reconstructed cracks however depends on two major issues, namely the quality of the measured data (measurement error) and the discretization of the crack model. The first one will be taken into account by applying regularizing methods with a posteriori stopping criteria. The second one is critical in the sense that too few degrees of freedom, i.e. the number of control points of the NURBS, do not allow for a precise description of the crack. An increased number of control points, however, increases the number of unknowns in the inverse analysis and intensifies the ill-posedness. The trade-off between accuracy and stability is aimed to be found by applying an inverse multilevel algorithm [3, 4] where the identification is started with short knot vectors which successively will be enlarged during the identification process. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27717 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Keitel, Holger ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - QUANTIFYING THE QUALITY OF PARTIAL MODEL COUPLING AND ITS EFFECT ON THE SIMULATED STRUCTURAL BEHAVIOR T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - The process of analysis and design in structural engineering requires the consideration of different partial models, for example loading, structural materials, structural elements, and analysis types. The various partial models are combined by coupling several of their components. Due to the large number of available partial models describing similar phenomena, many different model combinations are possible to simulate the same aspects of a structure. The challenging task of an engineer is to select a model combination that ensures a sufficient, reliable prognosis. In order to achieve this reliable prognosis of the overall structural behavior, a high individual quality of the partial models and an adequate coupling of the partial models is required. Several methodologies have been proposed to evaluate the quality of partial models for their intended application, but a detailed study of the coupling quality is still lacking. This paper proposes a new approach to assess the coupling quality of partial models in a quantitative manner. The approach is based on the consistency of the coupled data and applies for uni- and bidirectional coupled partial models. Furthermore, the influence of the coupling quality on the output quantities of the partial models is considered. The functionality of the algorithm and the effect of the coupling quality are demonstrated using an example of coupled partial models in structural engineering. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27689 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Kulchytskyy, Artem A1 - Horokhov, Yevgen A1 - Gubanov, Vadim A1 - Golikov, Alexandr ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - THE INFLUENCE OF THE LOCAL CONCAVITY ON THE FUNCTIONING OF BEARING SHELL OF HIGH-RISE CONSTRUCTION T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Areas with various defects and damages, which reduce carrying capacity, were examined in a study of metal chimneys. In this work, the influence of the local dimples on the function of metal chimneys was considered. Modeling tasks were completed in the software packages LIRA and ANSYS. Parameters were identified, which characterize the local dimples, and a numerical study of the influence of local dimples on the stress-strain state of shells of metal chimneys was conducted. A distribution field of circular and meridional tension was analyzed in a researched area. Zones of influence of dimples on the bearing cover of metal chimneys were investigated. The bearing capacities of high-rise structures with various dimple geometries and various cover parameters were determined with respect to specified areas of the trunk. Dependent relationships are represented graphically for the decrease in bearing capacity of a cover with respect to dimples. Diameter and thickness of covers of metal chimneys were constructed according to the resulting data. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27701 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Wudtke, Idna ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - CONSTITUTIVE MODELING OF CRYSTALLINE MATERIALS WITH TEXTURE CHARACTERISTICS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - The analysis of the response of complex structural systems requires the description of the material constitutive relations by means of an appropriate material model. The level of abstraction of such model may strongly affect the quality of the prognosis of the whole structure. In context to this fact, it is necessary to describe the material in a convenient sense as exact but as simple as possible. All material phenomena of crystalline materials e.g. steel, affecting the behavior of the structure, rely on physical effects which are interacting over spatial scales from subatomic to macroscopic range. Nevertheless, if the material is microscopically heterogenic, it might be appropriate to use phenomenological models for the purpose of civil engineering. Although constantly applied, these models are insufficient for steel materials with microscopic characteristics such as texture, typically occurring in hot rolled steel members or heat affected zones of welded joints. Hence, texture is manifested in crystalline materials as a regular crystallographic structure and crystallite orientation, influencing macroscopic material properties. The analysis of structural response of material with texture (e.g. rolled steel or heat affected zone of a welded joint) obliges the extension of the phenomenological material description of macroscopic scale by means of microscopic information. This paper introduces an enrichment approach for material models based on a hierarchical multiscale methodology. This has been done by describing the grain texture on a mesoscopic scale and coupling it with macroscopic constitutive relations by means of homogenization. Due to a variety of available homogenization methods, the question of an assessment of coupling quality arises. The applicability of the method and the effect of the coupling method on the reliability of the response are presented on an example. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27910 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Schmeikal, Bernd Anton ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - BAUHAUS ISOMETRY AND FIELDS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - While integration increases by networking, segregation strides ahead too. Most of us fixate our mind on special topics. Yet we are relying on our intuition too. We are sometimes waiting for the inflow of new ideas or valuable information that we hold in high esteem, although we are not entirely conscious of its origin. We may even say the most precious intuitions are rooting in deep subconscious, collective layers of the mind. Take as a simple example the emergence of orientation in paleolithic events and its relation to the dihedral symmetry of the compass. Consider also the extension of this algebraic matter into the operational structures of the mind on the one hand and into the algebra of geometry, Clifford algebra as we use to call it today, on the other. Culture and mind, and even the individual act of creation may be connected with transient events that are subconscious and inaccessible to cognition in principle. Other events causative for our work may be merely invisible too us, though in principle they should turn out attainable. In this case we are just ignorant of the whole creative process. Sometimes we begin to use unusual tools or turn into handicraft enthusiasts. Then our small institutes turn into workshops and factories. All this is indeed joining with the Bauhaus and its spirit. We shall go together into this, and we shall present a record of this session. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27859 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Castillo-Pérez, Raúl A1 - Cedillo - Díaz, A. del C. A1 - Kravchenko, Vladislav A1 - Oviedo - Galdeano, H. ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - COMPUTATION OF THE REFLECTANCE AND TRANSMITTANCE FOR AN INHOMOGENEOUS LAYERED MEDIUM WITH TURNING POINT S USING THE WKB AND SPPS METHODS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Electromagnetic wave propagation is currently present in the vast majority of situations which occur in veryday life, whether in mobile communications, DTV, satellite tracking, broadcasting, etc. Because of this the study of increasingly complex means of propagation of lectromagnetic waves has become necessary in order to optimize resources and increase the capabilities of the devices as required by the growing demand for such services. Within the electromagnetic wave propagation different parameters are considered that characterize it under various circumstances and of particular importance are the reflectance and transmittance. There are several methods or the analysis of the reflectance and transmittance such as the method of approximation by boundary condition, the plane wave expansion method (PWE), etc., but this work focuses on the WKB and SPPS methods. The implementation of the WKB method is relatively simple but is found to be relatively efficient only when working at high frequencies. The SPPS method (Spectral Parameter Powers Series) based on the theory of pseudoanalytic functions, is used to solve this problem through a new representation for solutions of Sturm Liouville equations and has recently proven to be a powerful tool to solve different boundary value and eigenvalue problems. Moreover, it has a very suitable structure for numerical implementation, which in this case took place in the Matlab software for the valuation of both conventional and turning points profiles. The comparison between the two methods allows us to obtain valuable information about their perfor mance which is useful for determining the validity and propriety of their application for solving problems where these parameters are calculated in real life applications. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170306-27598 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - THES A1 - Karaki, Ghada T1 - Assessment of coupled models of bridges considering time-dependent vehicular loading N2 - Bridge vibration due to traffic loading has been a subject of extensive research in the last decades. The focus of such research has been to develop solution algorithms and investigate responses or behaviors of interest. However, proving the quality and reliability of the model output in structural engineering has become a topic of increasing importance. Therefore, this study is an attempt to extend concepts of uncertainty and sensitivity analyses to assess the dynamic response of a coupled model in bridge engineering considering time-dependent vehicular loading. A setting for the sensitivity analysis is proposed, which enables performing the sensitivity analysis considering random stochastic processes. The classical and proposed sensitivity settings are used to identify the relevant input parameters and models that have the most influence on the variance of the dynamic response. The sensitivity analysis exercises the model itself and extracts results without the need for measurements or reference solutions; however, it does not offer a means of ranking the coupled models studied. Therefore, concepts of total uncertainty are employed to rank the coupled models studied according to their fitness in describing the dynamic problem. The proposed procedures are applied in two examples to assess the output of coupled subsystems and coupled partial models in bridge engineering considering the passage of a heavy vehicle at various speeds. N2 - Brückenschwingungen infolge von Verkehrslasten sind seit mehreren Jahrzehnten Gegenstand intensiver Forschung. Im Fokus stand hierbei im Besonderen die Entwicklung von Lösungsalgorithmen zur Ermittlung des dynamischen Bauwerkverhaltens. Begleitet ist diese Entwicklung von der Frage nach der Qualität und Zuverlässigkeit dieser Modelle für den Gebrauch im konstruktiven Ingenieurbau. In diesem Zusammenhang werden in der vorliegenden Arbeit Konzepte der Unsicherheits- und Sensitivitätsanalyse erweitert, um das dynamische Bauwerkverhalten unter Berücksichtigung transienter Fahrzeuglasten bei gekoppelten Modellen des Brückenbaus zu bewerten. Bestehende Sensitivitätsanalysen werden ergänzt, um diese auch unter Berücksichtigung von stochastischen Prozessen durchführen zu können. Die klassische und die erweiterte Methode werden angewandt, um relevante Eingangsparameter sowie Partialmodelle mit wesentlichem Einfluss auf die Varianz der dynamischen Strukturantwort zu identifizieren. Die mit Hilfe der Sensitivitätsanalyse ermittelbaren Kennzahlen können ohne Bezug zu einer Referenzlösung in die Modellbewertung einfließen, allerdings ist es nicht möglich, die Modelle hinsichtlich der realitätsnahen Abbildung des dynamischen Problems zu bewerten. Um dies zu ermöglichen, wurden Konzepte der Gesamtunsicherheit verwendet. Die vorgestellten Methoden wurden auf zwei Beispiele angewandt, um die Ergebnisse von gekoppelten Subsystemen und gekoppelten Partialmodellen des Brückenbaus zu evaluieren. Hierbei handelt es sich um die Überfahrt von schweren Fahrzeugen mit verschiedenen Geschwindigkeiten. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 5 KW - Ingenieurbau KW - bridge-vehicle interaction KW - random vibrations KW - sensitivity and uncertainty analysis Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120402-15894 ER - TY - CHAP A1 - Mirallas Hernandez, Catherine T1 - E-Books : Interessenkonflikte zwischen Bibliotheken, Nutzern und Verlagen T2 - Alles digital? : E-Books in Studium und Lehre N2 - Beitrag während der Weimarer EDOC-Tage 2011 KW - Bibliothek KW - Verlag KW - Benutzer KW - Elektronische Buch KW - Buchmarkt Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120404-15941 SP - 54 EP - 63 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - CHAP A1 - Mumenthaler, Rudolf T1 - E-Books und E-Reader als Herausforderung für Bibliotheken T2 - Alles digital? : E-Books in Studium und Lehre N2 - Beitrag während der Weimarer EDOC-Tage 2011 KW - Elektronisches Buch KW - E-Book-Reader KW - Elektronische Formate KW - Bibliothek Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120403-15913 SP - 44 EP - 51 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - THES A1 - Posern, Konrad T1 - Untersuchungen von Magnesiumsulfat-Hydraten und Sulfat/Chlorid-Mischungen für die Eignung als Aktivstoff in Kompositmaterialien für die thermochemische Wärmespeicherung N2 - Die thermochemische Wärmespeicherung über reversible Salzhydratation stellt einen aussichtsreichen Weg zur Speicherung von Niedertemperaturwärme, wie z.B. solarer Energie, dar. Untersuchungen an Magnesiumsulfat-Hydraten zeigen, dass das bei 130°C entwässerte Magnesiumsulfat-Heptahydrat seinen thermodynamisch stabilen Endzustand während der Reaktion mit gasförmigem Wasser nicht wieder erreicht. Um diese kinetische Hemmung zu überwinden und den Einfluss von unterschiedlichen Porenräumen auf die Hydratation bzw. Sorption des Magnesiumsulfates zu charakterisieren, wurde das Magnesiumsulfat in Trägermaterialien auf Basis offenporiger Gläser mit durchschnittlichen Porendurchmessern von 4 nm bis 1,4 µm eingebracht und diese Kompositmaterialien untersucht. Dabei ist festgestellt worden, dass jede salzbezogene Sorptionswärme im Porenraum höher ist, als die des ungeträgerten Salzes und mit kleiner werdendem Porenradius weiter zunimmt. Weiterhin wurden Teile des Magnesiumsulfates mit niedrig deliqueszierenden Salzen substituiert, um die Wasseraufnahme und somit die Wärmespeicherkapazität zu erhöhen. Dies stellt einen neuen Weg zur Herstellung von Kompositmaterialien dar, über den man Eigenschaften wie Deliqueszenzfeuchte und Desorptionstemperatur einstellen und an die Sorptionsbedingungen eines Speichers anpassen kann. Als niedrig deliqueszierende Salze wurden Magnesiumchlorid und Lithiumchlorid als Zusätze untersucht, wobei ein Ansteigen der Sorptionswärme und Wasseraufnahme mit steigendem Chloridanteil festgestellt wurde. Aufgrund der geringeren Deliqueszenzfeuchte des Lithiumchlorides gegenüber dem Magnesiumchlorid wurden bei gleichen Massenverhältnissen höhere Sorptionswärmen erzielt. Untersuchungen zu Zinksulfat in Verbindung mit Chloriden bescheinigen diesem Salz -speziell bei tieferen Entwässerungstemperaturen- eine gute Eignung als Aktivstoff zur Wärmespeicherung. Zusammenfassend konnte festgestellt werden, dass sich die Wärmespeicherkapazitäten über die Porengröße, in die das Salz eingebracht wird, und die gewählte Mischungszusammensetzung steuern lassen. Die gemessenen Sorptionswärmen ermöglichen insbesondere bei niedrigen Sorptionstemperaturen und hohen Luftfeuchtigkeiten den Schluss, dass die Verwendung von Salzmischungen als Aktivkomponente in Kompositmaterialien einen geeigneten Weg zur thermochemischen Speicherung solarer Wärme (≤130 °C) darstellt. N2 - Thermochemical heat storage based on reversible salt hydration is a promising way for low temperature storage, like solar energy. Investigations on magnesium sulfate hydrates, which were dehydrated at 130 °C show, that the thermodynamic stable product of the reaction with gaseous water is not reached. To overcome this kinetic hindrance different host materials were impregnated with magnesium sulfate and the composite materials were characterized. The sorption behavior of the dehydrated sulfate within host materials with different pore sizes (4 nm – 1.4 µm) was investigated. It could be found, that the heat of sorption of magnesium sulfate increases with decreasing pore sizes and correlates with the water sorption. Additionally different parts of magnesium sulfate were substituted with low deliquescent salts to improve the water uptake and the heat storage capacity. The using of such salt mixtures is a new way to set parameters like deliquescence relative humidity and temperature of desorption on the performance of a heat storage system. Magnesium chloride and lithium chloride were used as low deliquescent salts. The heat of sorption and the water uptake increase with an increasing amount of the chloride. Due to the lower deliquescence relative humidity of lithium chloride compared to the magnesium chloride, higher heats of sorption could be measured at the same mass ratios. Mixtures of zinc sulfate with chlorides are suitable for thermochemical heat storage applications, in particular at low temperatures of desorption. In summary, it was found that the heat storage capacities are influenced by the pore size of the host material and the chosen salt mixture. At low sorption temperatures and high relative humidities the using of salt mixtures is an appropriate way for the thermochemical storage of solar heat (≤130 °C). KW - Thermische Energiespeicherung KW - Anorganische Salze KW - Thermochemische Wärmespeicherung KW - Sorptionswärme KW - poröse Trägermaterialien KW - Salzmischungen KW - Magnesiumsulfat Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120704-16784 ER - TY - THES A1 - Nerlich, Luise T1 - KLANG tektonik _ Entwurfsgrammatik in Architektur und Musik im Werk des Architekten und Komponisten Iannis Xenakis N2 - klang_tektonik Design by grammar in architecture and music Architectural design is a creative process. Its emergence requires a creative component and it cannot be systematized. But while teaching architecture, work with a method to design is an essential aspect. In addition to the intuitive methods of design, however, also exist grammars, which explicit rules postulated for form finding and can be taught as such. In consideration of formative architectural and musical design, parameters will be presented, to design a transformation of music into architecture. Two revolutionary works are created in the 1950s, the composition Metastaseis and the Philips Pavilion for the World Exhibition in Brussels by the architect and composer Iannis Xenakis. Based on these works, there will be presented the method, how to replace musical parameters in to architectural parameters. This process provides the basis for an accurate spatial transformation model, which is designed on the basis of mathematical functions and has a strong similarity in language between the shape of the composition Metastaseis and architecture of the pavilion. N2 - Architektonisches Entwerfen ist ein kreativer Prozess, der eine Lösung hervorbringt, die in ihrer Form und ihrer Funktionalität so noch nicht bestand. Resultat eines architektonischen Entwurfes ist ein Original, dessen Entstehen eine schöpferische Komponente erfordert. Dieser kreative Prozess ist nicht systematisierbar und kann auch nicht als Methode wiederholbar gemacht werden. Im Rahmen der architektonischen Lehre ist die Vermittlung von Methoden zur Entwurfsfindung jedoch ein wesentlicher Aspekt. Der hier vorgestellte Entwurf möchte zeigen, dass der Auffassung, allein intuitive Methoden als Entwurfsgrundlage zu nutzen, die Auffassung entgegen steht, eine reglementierte Methode zur Entwurfs- und Formfindung anzuwenden. Eine solche reglementierte Methode wird hierbei als Entwurfsgrammatik bezeichnet. In den 1950er Jahren entstehen zwei revolutionäre Werke des Komponisten und Architekten Iannis Xenakis: die Komposition Metastaseis und der Philips-Pavillon für die Weltausstellung in Brüssel. Basierend auf diesen Arbeiten wird eine Methode vorgestellt, welche musikalische Parameter in architektonischen Parameter transformiert. Diese Methode bildet die Grundlage für ein exaktes räumliches Transformation-Modell, welches aus mathematischen Funktionen abgeleitet ist. Dabei weißt das Transformations-Modell eine starke Ähnlichkeit mit der Architektur des Pavillons auf. KW - Architektur KW - Musik KW - architektonischer Entwurf KW - Systementwurf KW - architektonischer Entwurf KW - Musik und Architektur KW - Philips Pavillon KW - Iannis Xenakis KW - Metastaseis Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120607-16689 ER - TY - CHAP A1 - Lucius, Wulf D. von T1 - Perspektiven für Verlage im digitalen Zeitalter T2 - Alles digital? : E-Books in Studium und Lehre N2 - Beitrag während der Weimarer EDOC-Tage 2011 KW - Verlag KW - Digital Rights Management KW - Urheberrecht KW - Vertriebsweg KW - Freemium KW - Preispolitik Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120327-15813 SP - 32 EP - 41 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - BOOK ED - Maier, Matthias ED - Simon-Ritz, Frank T1 - Alles digital? E-Books in Studium und Forschung : Weimarer EDOC-Tage 2011 N2 - Es ist ein Bild aus alten Tagen: ein wissbegieriger Student, auf der Suche nach fundierter wissenschaftlicher Information, begibt sich an den heiligsten Ort aller Bücher – die Universitätsbibliothek. Doch seit einiger Zeit tummeln sich Studierende nicht mehr nur in Bibliotheken, sondern auch immer häufiger im Internet. Sie suchen und finden dort digitale Bücher, sogenannte E-Books. Wie lässt sich der Wandel durch den Einzug des E-Books in das etablierte Forschungssystem beschreiben, welche Konsequenzen lassen sich daraus ablesen und wird schließlich alles digital, sogar die Bibliothek? Diesen Fragen geht ein elfköpfiges Expertenteam aus Deutschland und der Schweiz während der zweitägigen Konferenz auf den Grund. Bei den Weimarer E-DOC-Tagen geht es nun um die Veränderung des institutionellen Gefüges rund um das digitale Buch. Denn traditionell sind Verlage und Bibliotheken wichtige Bestandteile der Wissensversorgung in Studium und Lehre. Doch mit dem Aufkommen des E-Books verlagert sich die Recherche mehr und mehr ins Internet. Die Suchmaschine Google tritt als neuer Konkurrent der klassischen Bibliotheksrecherche auf. Aber auch Verlage müssen verstärkt auf die neuen Herausforderungen eines digitalen Buchmarktes reagieren. In Kooperation mit der Universitätsbibliothek und dem Master-Studiengang Medienmanagement diskutieren Studierende, Wissenschaftler, Bibliothekare und Verleger, wie das E-Book unseren Umgang mit Literatur verändert. Der Tagungsband stellt alle Perspektiven und Ergebnisse zum Nachlesen zusammen. KW - Elektronisches Buch KW - Studium KW - Lehre KW - Forschung KW - EDOC-Tage Weimar 2011 KW - E-Book KW - Digitaler Buchmarkt Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120223-15699 SN - 978-3-86068-454-2 N1 - Die Tagung fand am 27. - 28. Mai 2011 an der Bauhaus-Univesität Weimar im Audimax statt. PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - JOUR A1 - Hildebrand, Jörg A1 - Hecht, Kerstin A1 - Bliedtner, Jens A1 - Müller, Hartmut T1 - Advanced Analysis of Laser Beam Polishing of Quartz Glass Surfaces JF - Physics Procedia N2 - The laser beam is a small, flexible and fast polishing tool. With laser radiation it is possible to finish many outlines or geometries on quartz glass surfaces in the shortest possible time. It’s a fact that the temperature developing while polishing determines the reachable surface smoothing and, as a negative result, causes material tensions. To find out which parameters are important for the laser polishing process and the surface roughness respectively and to estimate material tensions, temperature simulations and extensive polishing experiments took place. During these experiments starting and machining parameters were changed and temperatures were measured contact-free. The accuracy of thermal and mechanical simulation was improved in the case of advanced FE-analysis. KW - Laser KW - Berührungslose Messung KW - Polieren KW - Empfindlichkeit KW - Quarzglas KW - laser; contactless measurement; quartz glass; polishing; temperature; residual stress; simulation; sensitivity Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170418-31372 UR - http://www.sciencedirect.com/science/article/pii/S1875389212025667 SP - 277 EP - 285 ER - TY - THES A1 - Nikulla, Susanne T1 - Quality assessment of kinematical models by means of global and goal-oriented error estimation techniques T1 - Anwendung globaler und zielorientierter Fehlerschätzer zur Beurteilung der Notwendigkeit einer geometrisch nicht-linearen Berechnung N2 - Methods for model quality assessment are aiming to find the most appropriate model with respect to accuracy and computational effort for a structural system under investigation. Model error estimation techniques can be applied for this purpose when kinematical models are investigated. They are counted among the class of white box models, which means that the model hierarchy and therewith the best model is known. This thesis gives an overview of discretisation error estimators. Deduced from these, methods for model error estimation are presented. Their general goal is to make a prediction of the inaccuracies that are introduced using the simpler model without knowing the solution of a more complex model. This information can be used to steer an adaptive process. Techniques for linear and non-linear problems as well as global and goal-oriented errors are introduced. The estimation of the error in local quantities is realised by solving a dual problem, which serves as a weight for the primal error. So far, such techniques have mainly been applied in material modelling and for dimensional adaptivity. Within the scope of this thesis, available model error estimators are adapted for an application to kinematical models. Their applicability is tested regarding the question of whether a geometrical non-linear calculation is necessary or not. The analysis is limited to non-linear estimators due to the structure of the underlying differential equations. These methods often involve simplification, e.g linearisations. It is investigated to which extent such assumptions lead to meaningful results, when applied to kinematical models. N2 - Die verschiedenen Methoden zur Bewertung der Modellqualität haben ein Ziel: Das passende Modell in Bezug auf Genauigkeit und Berechnungsaufwand für eine konkrete Struktur zu finden. Steht dabei die Untersuchung eines Kinematik-Modells im Vordergrund, können Modellfehlerschätzer zur Modellbewertung verwendet werden. Dieser Zusammenhang gilt, solange es sich um mechanisch motivierte Modelle handelt, bei denen die Modellhierarchie und damit das beste Modell bekannt sind. Die vorliegende Arbeit beschreibt den Weg von den einfachen Fehlerschätzern für Diskretisierungsfehler bis zu den daraus abgeleiteten Modellfehlerschätzern. Das Ziel der letztgenannten besteht in der Vorhersage von Ungenauigkeit, die durch die Verwendung eines vereinfachten anstatt des komplexen Modells entstehen. Aus den gewonnenen Informationen wird eine adaptive Modellanpassung entwickelt. Die Methoden lassen sich dabei nach verschiedenen Kriterien unterscheiden. Diese diffenzieren zwischen den verschiedenen Anwendungsbereichen, zwischen linearen und nicht-linearen Modellen sowie zwischen globalen und ziel-orientierten Fehlern. Die bislang in der Literatur hauptsächlich zu findenden Anwendungsgebiete sind die Materialmodellierung und die Dimensionsadaptivität. Im Rahmen dieser Arbeit werden nun die bekannten Methoden zur Abschätzung des Modellfehlers auf kinematische Modelle erweitert. Zudem wird die Frage, ob eine geometrisch nicht-lineare Berechnung notwendig ist oder nicht, untersucht. Aufgrund der Struktur der zugrunde liegenden Differentialgleichungen beschränken sich die Analysen auf nicht-lineare Fehlerschätzer. Da diese Methoden oft auf Vereinfachungen wie z.B. die Linearisierung der Grundgleichungen zurückgreifen, wird in der vorliegenden Arbeit untersucht, inwieweit diese Annahmen zu verwertbaren Ergebnissen führen. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 4 KW - Model quality, Model error estimation, Kinematical model, Geometric non-linearity, Finite Element method KW - Modellqualität, Modellfehlerschätzer, Geometrisch nicht-lineare Berechnung, Kinematik Modell, Finite Elemente Methode Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120419-16161 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER - TY - THES A1 - Krause, Haie-Jann T1 - Kallmeyer und Facilides. Eine Architektengemeinschaft im Kontext ihrer Entwicklung von konservativen Gestaltungstendenzen zur Baukunst der Moderne. N2 - Die Vorstellung des Gesamtwerkes der halleschen Architekten Julius Kallmeyer und Wilhelm Facilides, die sich Anfang der 1920er Jahre zu einer Zusammenarbeit entschlossen und eine Vielzahl interessanter Gebäude für die Saalestadt schufen, ist in der Fokussierung der Gesamtthematik der Lebens- und Werksdarstellung das Grundanliegen dieser Ausarbeitung. Dieses bisher nicht in Angriff genommene architekturgeschichtliche Anliegen beschäftigt sich mit den Ergebnissen der Bürogeschichte einer- und der Lebensgeschichte der Persönlichkeiten andererseits. Bis heute gelten die klassisch modernen Architekturen Kallmeyers & Facilides ́, gerade für den gehobenen Wohnhausbau in Halle an der Saale, als herausragende Leistungen. KW - Kallmeyer KW - Facilides KW - Moderne KW - Halle KW - Architektur KW - BDA KW - 56.62 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120114-15140 ER - TY - THES A1 - Stein, Peter T1 - Procedurally generated models for Isogeometric Analysis N2 - Increasingly powerful hard- and software allows for the numerical simulation of complex physical phenomena with high levels of detail. In light of this development the definition of numerical models for the Finite Element Method (FEM) has become the bottleneck in the simulation process. Characteristic features of the model generation are large manual efforts and a de-coupling of geometric and numerical model. In the highly probable case of design revisions all steps of model preprocessing and mesh generation have to be repeated. This includes the idealization and approximation of a geometric model as well as the definition of boundary conditions and model parameters. Design variants leading to more resource-efficient structures might hence be disregarded due to limited budgets and constrained time frames. A potential solution to above problem is given with the concept of Isogeometric Analysis (IGA). Core idea of this method is to directly employ a geometric model for numerical simulations, which allows to circumvent model transformations and the accompanying data losses. Basis for this method are geometric models described in terms of Non-uniform rational B-Splines (NURBS). This class of piecewise continuous rational polynomial functions is ubiquitous in computer graphics and Computer-Aided Design (CAD). It allows the description of a wide range of geometries using a compact mathematical representation. The shape of an object thereby results from the interpolation of a set of control points by means of the NURBS functions, allowing efficient representations for curves, surfaces and solid bodies alike. Existing software applications, however, only support the modeling and manipulation of the former two. The description of three-dimensional solid bodies consequently requires significant manual effort, thus essentially forbidding the setup of complex models. This thesis proposes a procedural approach for the generation of volumetric NURBS models. That is, a model is not described in terms of its data structures but as a sequence of modeling operations applied to a simple initial shape. In a sense this describes the "evolution" of the geometric model under the sequence of operations. In order to adapt this concept to NURBS geometries, only a compact set of commands is necessary which, in turn, can be adapted from existing algorithms. A model then can be treated in terms of interpretable model parameters. This leads to an abstraction from its data structures and model variants can be set up by variation of the governing parameters. The proposed concept complements existing template modeling approaches: templates can not only be defined in terms of modeling commands but can also serve as input geometry for said operations. Such templates, arranged in a nested hierarchy, provide an elegant model representation. They offer adaptivity on each tier of the model hierarchy and allow to create complex models from only few model parameters. This is demonstrated for volumetric fluid domains used in the simulation of vertical-axis wind turbines. Starting from a template representation of airfoil cross-sections, the complete "negative space" around the rotor blades can be described by a small set of model parameters, and model variants can be set up in a fraction of a second. NURBS models offer a high geometric flexibility, allowing to represent a given shape in different ways. Different model instances can exhibit varying suitability for numerical analyses. For their assessment, Finite Element mesh quality metrics are regarded. The considered metrics are based on purely geometric criteria and allow to identify model degenerations commonly used to achieve certain geometric features. They can be used to decide upon model adaptions and provide a measure for their efficacy. Unfortunately, they do not reveal a relation between mesh distortion and ill-conditioning of the equation systems resulting from the numerical model. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 7 KW - NURBS KW - Isogeometric Analysis KW - Procedural modeling KW - Templates KW - Mesh quality Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130212-18483 SN - 978-3-86068-488-7 PB - Universitätsverlag CY - Weimar ER - TY - THES A1 - Schneider, Jens T1 - Untersuchungen zum Alterungsverhalten und zur Langzeitstabilität von Y-TZP/Al2O3-Dispersionskeramiken (ATZ) für die Anwendung in der Hüft-Endoprothetik N2 - 6 Zusammenfassung und Ausblick Die hydrothermal induzierte Phasentransformation konnte für ATZ-Keramik mit tiefenge-mittelten und tiefenaufgelösten Methoden charkterisiert und quantifiziert werden. Die zeit- und temperaturabhängige Alterungskinetik von ATZ wurde durch neun Tempera-turstufen in einem Temperaturbereich von 50 °C bis 134 °C untersucht und die kinetischen Parameter nummerisch bestimmt. Für 3Y-TZP wurde diese Prozedur bei drei Temperaturen im Temperaturbereich von 70 °C bis 134 °C angewendet. Aufgrund des ARRHENIUS-Verhaltens der Umwandlungskinetik konnte der zeitliche Verlauf der isotherm stattfinden-den hydrothermal induzierten Phasentransformation bei Körpertemperatur simuliert wer-den. Die Simulation dient zur Bewertung der Langzeitstabilität von medizinischen Implanta-ten aus ATZ bzw. 3Y-TZP. Die Untersuchungen wurden in Wasser und in Wasserdampf bzw. wasserdampfgesättigter Luft durchgeführt. Die Langzeitsimulation für 3Y-TZP wurde an-hand von Explantat-Untersuchungen verifiziert. ATZ zeigt gegenüber 3Y-TZP eine höhere Alterungsstabilität bezogen auf die zeitliche Ent-wicklung der monoklinen Phase. Im Hinblick auf die Oberflächenhärte, die durch die Pha-senumwandlung stark beeinflusst wird, erweist sich ATZ über einen langen Alterungszeit-raum stabiler als 3Y-TZP. Bis zu einem monoklinen Gehalt von 40 % beweist ATZ einen deutlichen Härtevorteil gegenüber 3Y TZP, dieser entspricht in der Langzeitsimulation für die Wasserlagerung ca. 35 Jahre. Das wirkt sich insbesondere bei Verschleißpaarungen wie beim künstlichen Hüftgelenk positiv aus. Verschleißuntersuchungen an einer neu entwickelten Kugel-auf-Scheibe-Geometrie mit li-nearer Kinematik, die dem Hüftgelenk nachempfunden wurde, belegen die vorteilhaften Verschleißeigenschaften von ATZ in Form von sehr geringen Abtragsraten und einer intak-ten Oberfläche nach 720 000 absolvierten Zyklen. Dabei wurde sogar eine Aufhärtung der Oberfläche durch die Verschleißbeanspruchung um bis zu 8 % nachgewiesen. Bei der tiefengemittelten Charakterisierung der hydrothermalen Alterung wurde in beiden Materialtypen festgestellt, dass die Geschwindigkeit der Phasentransformation neben der Temperatur merklich von der Änderung der H2O-Stoffmengenkonzentrantion an der Ober-fläche der Keramik abhängig ist, was sich mit den unterschiedlichen Aktivierungsenergien für Wasser- bzw. Wasserdampflagerung belegen lässt. Die Aktivierungsenergie Ea der hyd-rothermalen Phasentransformation wurde mit Hilfe der ARRHENIUS-Beziehung ermittelt und beträgt für ATZ bei Wasserdampflagerung 102 kJ/mol und bei Wasserlagerung 92 kJ/mol. Für Y-TZP beträgt die Aktivierungsenergie 114 kJ/mol bei Wasserdampflagerung und 102 kJ/mol bei Wasserlagerung. Der resultierende präexponentielle Faktor k0 unterscheidet sich für Wasserlagerung und Wasserdampflagerung um eine Größenordnung, was auf einen leicht andersartigen thermisch aktivierten Gesamtprozess hinweist. Der Avrami-Exponent n, der einen Hinweis auf den Mechanismus der Keimbildung sowie deren geometrische Ordnung geben kann, zeigte keine signifikante Abhängigkeit von der Temperatur und vom Umgebungsmedium. Er ist dagegen zeitabhängig und fällt mit zuneh-mender Alterungszeit, d.h. mit zunehmendem monoklinem Gehalt von ca. 4 auf 0,5 ab, was auf eine abnehmende Keimbildungsrate hindeutet. In Verbindung mit weiteren Untersu-chungen durch unabhängige und zum Teil tiefenauflösende Methoden wie GIXRD, NRA und Knoop-Mikrohärte-Messungen lässt sich der Alterungsmechanismus, bzw. sein zeitlicher und örtlicher Ablauf, durch die drei Stadien A, B und C beschreiben: A 0-5 ma. % m-ZrO2 Quasi-homogene Keimbildung an bevorzugten Orten wie Kornkan-ten und Kornecken (n≈4), Wassertransport wahrscheinlich via Korngrenzendiffusion, Aufhärtung der Oberfläche B 5-40 ma. % m-ZrO2 Keimbildung an den Korngrenzflächen bis zur Keimsättigung (n≈2), monokline Randschicht wächst zeitlich linear, Wassertransport konvektiv über Mikrorisse, deutlicher Härteverlust der Oberfläche C ≥ 40 ma. % m-ZrO2 Wachstum der monoklinen Kristallite von den Korngrenzflächen in die tetragonalen Kristallite unter starker Verzwillingung (n≈0,5), Abnahme der tetragonalen Kristallitgröße, starke Mikrorissbildung, dramatischer Rückgang der Oberflächenhärte Die Kristallitgröße der monoklinen Phase verbleibt im ATZ über alle drei Abschnitte bei 30 ±5 nm. Ein Anwachsen der Kristallite ist mechanische behindert. Kleinere monokline Kristallite sind im ATZ thermodynamisch instabil. Die Kristallitgröße der tetragonalen Phase fällt in den Abschnitten A und B sehr langsam und in C sehr schnell bis auf 25 nm ab. Bei dieser Kristallitgröße ist die tetragonale Phase gegenüber der monoklinen Phase thermody-namisch stabil. Diese residualen tetragonalen Kristallite weisen nach vollständigem Reakti-onsablauf einem Anteil von 7 ma. % auf. Der Sättigungsgehalt der monoklinen Phase betrug in beiden Materialen unabhängig von der Temperatur bzw. dem Umgebungsmedium 75 % der ZrO2-Phase. In Abschnitt C besitzt die residuale tetragonale Phase eine starke Orientierung. Dadurch wird die geometrische Bedingtheit der hydrothermal induzierten Phasenumwandlung ver-deutlicht. Die monokline Phase ist über den gesamten Alterungsprozess stark nach m(1 1  1) orientiert, was mit einer bevorzugten Umklapprichtung der c-Achse zur freien Oberfläche hin verbunden ist. Mit Hilfe der tiefenaufgelösten Phasenanalyse konnte die Wachstumsgeschwindigkeit der monoklinen Randschicht von der Oberfläche in das Volumen untersucht werden. Die Ge-schwindigkeit des Schichtwachstums ist in Abschnitt B nicht zeit- und tiefenabhängig, son-dern konstant mit ausgeprägtem ARRHENIUS-Verhalten (Temperaturabhängigkeit). Die Akti-vierungsenergie der Schichtwachstumsgeschwindigkeit km liegt in der gleichen Größenord-nung wie die der Transformationskonstante k. Die Umwandlungszone schreitet also mit konstanter Geschwindigkeit in das Volumen fort und hinterlässt ein verzweigtes Mikro- und Nanoriss-System. FESEM-Aufnahmen bestätigen das Vorhandensein einer porösen Randschicht, durch die das Wasser nahezu ungehindert eindringen kann. NRA Untersuchungen deuten in Stadium A auf Korngrenzendiffusion hin und bestätigen in Stadium B einen konvektiven Transport des Wassers an die Transformationszone. Eine Dif-fusion über Sauerstoffleerstellen im Gitter konnte anhand von Proben aus 8YSZ nicht nach-gewiesen werden. Dagegen kommt es in dem verzweigten Riss- und Porensystem in der gealterten Randschicht zum Rücktransport des Wassers an die Oberfläche, sobald die Pro-ben aus der hydrothermalen Atmosphäre genommen, an Luft gelagert oder in die Hochva-kuumkammer der NRA-Messapparatur eingeschleust werden. Mikrostrukturelle Untersuchungen an eigens entwickelten Verschleißpaarungen zeigten nach 720000 Zyklen ähnliche Oberflächeneigenschaften wie im Alterungsstadium A. Man kann daher davon ausgehen, dass die Stadien B und C aus Stabilitätsgründen in der tribolo-gischen Kontaktzone nicht existieren können und es dass sich im Falle einer gleichzeitigen, hydrothermalen und tribologischen Beanspruchung um einen stationären Alterungs- und Verschleißprozess handelt. Durch quasiplastische Deformation der monoklinen und tetra-gonalen Kristallite wird die Verschleißrate und die Abriebpartikel bei einer hart /hart Paa-rung aus ATZ deutlich minimiert, so dass ATZ für die Hüftendoprothetik ein durchaus geeig-neten Werkstoff darstellt, der sich auf der Grundlage der in dieser Arbeit gewonnenen Daten über eine Imlantationsdauer von .mehr als 15 Jahre stabil verhalten kann. KW - Dispersionskeramik KW - Hüftgelenkprothese KW - ATZ KW - Alterung KW - Simulation KW - GIXRD KW - NRA KW - Tribologie KW - Knoop Mikrohärte Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121130-17761 ER - TY - CHAP A1 - Abbas, Tajammal A1 - Morgenthal, Guido T1 - Model combinations for assessing the flutter stability of suspension bridges T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Long-span cable supported bridges are prone to aerodynamic instabilities caused by wind and this phenomenon is usually a major design criterion. If the wind speed exceeds the critical flutter speed of the bridge, this constitutes an Ultimate Limit State. The prediction of the flutter boundary therefore requires accurate and robust models. This paper aims at studying various combinations of models to predict the flutter phenomenon. Since flutter is a coupling of aerodynamic forcing with a structural dynamics problem, different types and classes of models can be combined to study the interaction. Here, both numerical approaches and analytical models are utilised and coupled in different ways to assess the prediction quality of the hybrid model. Models for aerodynamic forces employed are the analytical Theodorsen expressions for the motion-enduced aerodynamic forces of a flat plate and Scanlan derivatives as a Meta model. Further, Computational Fluid Dynamics (CFD) simulations using the Vortex Particle Method (VPM) were used to cover numerical models. The structural representations were dimensionally reduced to two degree of freedom section models calibrated from global models as well as a fully three-dimensional Finite Element (FE) model. A two degree of freedom system was analysed analytically as well as numerically. Generally, all models were able to predict the flutter phenomenon and relatively close agreement was found for the particular bridge. In conclusion, the model choice for a given practical analysis scenario will be discussed in the context of the analysis findings. KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren KW - Angewandte Informatik Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170306-27574 SN - 1611-4086 ER - TY - CHAP A1 - Eriksson, Sirkka-Liisa ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - MEAN VALUE PROPERTIES FOR THE WEINSTEIN EQUATION AND MODIFIED DIRAC OPERATORS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - We study the Weinstein equation u on the upper half space R3+. The Weinstein equation is connected to the axially symmetric potentials. We compute solutions of the Weinstein equation depending on the hyperbolic distance and x2. These results imply the explicit mean value properties. We also compute the fundamental solution. The main tools are the hyperbolic metric and its invariance properties. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27621 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Upmeier, Arne T1 - E-Books : Die Frustrationen des Urheberrechts T2 - Alles digital? : E-Books in Studium und Lehre N2 - Beitrag während der Weimarer EDOC-Tage 2011 KW - Elektronisches Buch KW - Urheberrecht KW - Digitale Welt Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120404-15954 SP - 66 EP - 71 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - CHAP A1 - De Aguinaga, José Guillermo ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - INFLUENCE OF DIFFERENT DATA TYPES FOR THE ESTIMATION OF HYDROMECHANICAL PARAMETERS FOR A WATER RETAINING DAM USING SYNTHETIC DATA T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - The present research analyses the error on prediction obtained under different data availability scenarios to determine which measurements contribute to an improvement of model prognosis and which not. A fully coupled 2D hydromechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are ranked by scaled sensitivities, Particle Swarm Optimization is applied to determine the optimal parameter values and model validation is performed to determine the magnitude of error forecast. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain actual prediction errors. The analyses presented here were performed to 31 data sets of 100 observations of varying data types. Calibrating with multiple information types instead of only one sort, brings better calibration results and improvement in model prognosis. However, when using several types of information the number of observations have to be increased to be able to cover a representative part of the model domain; otherwise a compromise between data availability and domain coverage prove best. Which type of information for calibration contributes to the best prognoses, could not be determined in advance. For the error in model prognosis does not depends on the error in calibration, but on the parameter error, which unfortunately can not be determined in reality since we do not know its real value. Excellent calibration fits with parameters’ values near the limits of reasonable physical values, provided the highest prognosis errors. While models which included excess pore pressure values for calibration provided the best prognosis, independent of the calibration fit. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170306-27607 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Jung, Bastian A1 - Morgenthal, Guido ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - ASSESSMENT OF INTEGRAL BRIDGES USING QUANTITATIVE MODEL EVALUATION T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Numerical simulations in the general field of civil engineering are common for the design process of structures and/or the assessment of existing buildings. The behaviour of these structures is analytically unknown and is approximated with numerical simulation methods like the Finite Element Method (FEM). Therefore the real structure is transferred into a global model (GM, e.g. concrete bridge) with a wide range of sub models (partial models PM, e.g. material modelling, creep). These partial models are coupled together to predict the behaviour of the observed structure (GM) under different conditions. The engineer needs to decide which models are suitable for computing realistically and efficiently the physical processes determining the structural behaviour. Theoretical knowledge along with the experience from prior design processes will influence this model selection decision. It is thus often a qualitative selection of different models. The goal of this paper is to present a quantitative evaluation of the global model quality according to the simulation of a bridge subject to direct loading (dead load, traffic) and indirect loading (temperature), which induce restraint effects. The model quality can be separately investigated for each partial model and also for the coupled partial models in a global structural model. Probabilistic simulations are necessary for the evaluation of these model qualities by using Uncertainty and Sensitivity Analysis. The method is applied to the simulation of a semi-integral concrete bridge with a monolithic connection between the superstructure and the piers, and elastomeric bearings at the abutments. The results show that the evaluation of global model quality is strongly dependent on the sensitivity of the considered partial models and their related quantitative prediction quality. This method is not only a relative comparison between different models, but also a quantitative representation of model quality using probabilistic simulation methods, which can support the process of model selection for numerical simulations in research and practice. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27662 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Ghorashi, Seyed Shahram A1 - Rabczuk, Timon A1 - Ródenas García, Juan José A1 - Lahmer, Tom ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - T-SPLINE BASED XIGA FOR ADAPTIVE MODELING OF CRACKED BODIES T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Safety operation of important civil structures such as bridges can be estimated by using fracture analysis. Since the analytical methods are not capable of solving many complicated engineering problems, numerical methods have been increasingly adopted. In this paper, a part of isotropic material which contains a crack is considered as a partial model and the proposed model quality is evaluated. EXtended IsoGeometric Analysis (XIGA) is a new developed numerical approach [1, 2] which benefits from advantages of its origins: eXtended Finite Element Method (XFEM) and IsoGeometric Analysis (IGA). It is capable of simulating crack propagation problems with no remeshing necessity and capturing singular field at the crack tip by using the crack tip enrichment functions. Also, exact representation of geometry is possible using only few elements. XIGA has also been successfully applied for fracture analysis of cracked orthotropic bodies [3] and for simulation of curved cracks [4]. XIGA applies NURBS functions for both geometry description and solution field approximation. The drawback of NURBS functions is that local refinement cannot be defined regarding that it is based on tensorproduct constructs unless multiple patches are used which has also some limitations. In this contribution, the XIGA is further developed to make the local refinement feasible by using Tspline basis functions. Adopting a recovery based error estimator in the proposed approach for evaluation of the model quality and performing the adaptive processes is in progress. Finally, some numerical examples with available analytical solutions are investigated by the developed scheme. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27637 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Liu, Xiangqin A1 - Leimbach, Robert A1 - Hartmann, Dietrich ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - SYSTEM IDENTIFICATION OF A WIND TURBINE STRUCTURE USING ROBUST MODEL UPDATING STRATEGY T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - This paper presents a robust model updating strategy for system identification of wind turbines. To control the updating parameters and to avoid ill-conditioning, the global sensitivity analysis using the elementary effects method is conducted. The formulation of the objective function is based on M¨uller-Slany’s strategy for multi-criteria functions. As a simulationbased optimization, a simulation adapter is developed to interface the simulation software ANSYS and the locally developed optimization software MOPACK. Model updating is firstly tested on the beam model of the rotor blade. The defect between the numerical model and the reference has been markedly reduced by the process of model updating. The effect of model updating becomes more pronounced in the comparison of the measured and the numerical properties of the wind turbine model. The deviations of the frequencies of the updated model are rather small. The complete comparison including the free vibration modes by the modal assurance criteria shows the excellent coincidence of the modal parameters of the updated model with the ones from the measurements. By successful implementation of the model validation via model updating, the applicability and effectiveness of the solution concept has been demonstrated. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27744 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - JOUR A1 - Köhler, Hermann A1 - König, Reinhard T1 - Aktionsräume in Dresden N2 - In vorliegender Studie werden die Aktionsräume von Befragten in Dresden über eine standardisierte Befragung (n=360) untersucht. Die den Aktionsräumen zugrundeliegenden Aktivitäten werden unterschieden in Einkaufen für den täglichen Bedarf, Ausgehen (z.B. in Café, Kneipe, Gaststätte), Erholung im Freien (z.B. spazieren gehen, Nutzung von Grünanlagen) und private Geselligkeit (z.B. Feiern, Besuch von Verwandten/Freunden). Der Aktionsradius wird unterschieden in Wohnviertel, Nachbarviertel und sonstiges weiteres Stadtgebiet. Um aus den vier betrachteten Aktivitäten einen umfassenden Kennwert für den durchschnittlichen Aktionsradius eines Befragten zu bilden, wird ein Modell für den Kennwert eines Aktionsradius entwickelt. Die Studie kommt zu dem Ergebnis, dass das Alter der Befragten einen signifikanten – wenn auch geringen – Einfluss auf den Aktionsradius hat. Das Haushaltsnettoeinkommen hat einen mit Einschränkung signifikanten, ebenfalls geringen Einfluss auf alltägliche Aktivitäten der Befragten. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 14 KW - Aktionsraumforschung KW - Quantitative Sozialforschung KW - Dresden Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26726 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Köhler, Hermann T1 - Ergebnisse der Befragung zu Wohnstandortpräferenzen von Lebensweltsegmenten in Dresden N2 - In vorliegender Studie werden die Wohnstandortpräferenzen der Sinus-Milieugruppen in Dresden über eine standardisierte Befragung (n=318) untersucht. Es wird unterschieden zwischen handlungsleitenden Wohnstandortpräferenzen, die durch Anhaltspunkte auf der Handlungsebene stärker in Betracht gezogen werden sollten, und Wohnstandortpräferenzen, welche eher orientierenden Charakter haben. Die Wohnstandortpräferenzen werden untersucht anhand der Kategorien Ausstattung/Zustand der Wohnung/des näheren Wohnumfeldes, Versorgungsstruktur, soziales Umfeld, Baustrukturtyp, Ortsgebundenheit sowie des Aspektes des Images eines Stadtviertels. Um die Befragten den Sinus-Milieugruppen zuordnen zu können, wird ein Lebensweltsegment-Modell entwickelt, welches den Anspruch hat, die Sinus-Milieugruppen in der Tendenz abzubilden. Die Studie kommt zu dem Ergebnis, dass die Angehörigen der verschiedenen Lebensweltsegmente in jeder Kategorie - wenn auch z.T. auf geringerem Niveau - signifikante Unterschiede in der Bewertung einzelner Wohnstandortpräferenzen aufweisen. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 12 KW - Milieuforschung KW - Residentielle Mobilität KW - Wohnstandortpräferenzen KW - Wohnstandortentscheidungen KW - Quantitative Sozialforschung Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26704 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Tonn, Christian A1 - Tatarin, René T1 - Volumen Rendering in der Architektur: Überlagerung und Kombination von 3D Voxel Volumendaten mit 3D Gebäudemodellen N2 - Volumerendering ist eine Darstellungstechnik, um verschiedene räumliche Mess- und Simulationsdaten anschaulich, interaktiv grafisch darzustellen. Im folgenden Beitrag wird ein Verfahren vorgestellt, mehrere Volumendaten mit einem Architekturflächenmodell zu überlagern. Diese komplexe Darstellungsberechnung findet mit hardwarebeschleunigten Shadern auf der Grafikkarte statt. Im Beitrag wird hierzu der implementierte Softwareprototyp "VolumeRendering" vorgestellt. Neben dem interaktiven Berechnungsverfahren wurde ebenso Wert auf eine nutzerfreundliche Bedienung gelegt. Das Ziel bestand darin, eine einfache Bewertung der Volumendaten durch Fachplaner zu ermöglichen. Durch die Überlagerung, z. B. verschiedener Messverfahren mit einem Flächenmodell, ergeben sich Synergien und neue Auswertungsmöglichkeiten. Abschließend wird anhand von Beispielen aus einem interdisziplinären Forschungsprojekt die Anwendung des Softwareprototyps illustriert. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 13 KW - Multiple Volume Rendering KW - Overlay KW - 3D Surface Models Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26718 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - THES A1 - Wendler, André T1 - Anachronismen: Historiografie und Kino N2 - Die Arbeit »Anachronismen: Historiografie und Kino« geht von einer zunächst einfachen Beobachtung aus: beinahe immer, wenn Historiker_innen sich mit Geschichtsfilmen auseinander setzen, findet sich die lautstark geführte Beschwerde über die zahlreichen und vermeidbaren Anachronismen der Filme, die sie als ernst zu nehmende historiografische Beiträge desavouieren. Von hier ausgehend verfolgt die Arbeit ein dreifaches Projekt: zunächst in einer kritischen Analyse geschichtstheoretischer Texte einige Hinweise für den Status von Anachronismen für die moderne westliche Historiografie zu gewinnen. Zweitens zu untersuchen, welche Rolle Anachronismen für den Geschichtsfilm spielen. Und drittens von dort aus das epistemische Potential anachronistischen Geschichtskinos zu untersuchen. Eine der Hauptthesen, welche den Blick sowohl auf die Filme wie auf die theoretischen Texte leitet, besagt, dass Anachronismen genau jene Punkte sind, an denen die Medien einer jeden Geschichtsschreibung beobachtbar werden. Die Beobachtung und Beschreibung dieser Medien der kinematografischen Geschichtsschreibung unternimmt die Arbeit unter Zuhilfenahme einiger theoretischer Überlegungen der Actor Network Theory (ANT). Die Arbeit ist in vier Kapitel gegliedert, in deren Zentrum jeweils die Diskussion eines ANT-Begriffs sowie die Analyse eines Geschichtsfilmes steht. Zu den untersuchten Filmen gehören Shutter Island (Martin Scorsese, 2010), Chronik der Anna Magdalena Bach (Jean-Marie Straub/Danièle Huillet, 1968), Cleopatra (Joseph L. Mankiewicz, 1963) und Caravaggio (Derek Jarman, 1986). Die Arbeit kommentiert außerdem theoretische Texte zur Historiografie und zu Anachronismen von Walter Benjamin, Leo Bersani, Georges Didi-Huberman, Siegfried Kracauer, Friedrich Meinecke, Friedrich Nietzsche, Jacques Rancière, Leopold Ranke, Paul Ricœur, Georg Simmel, Hayden White u. a. N2 - The study “Anachronisms: Historiography and Cinema” uses a rather simple observation as its starting point: almost always when historians are dealing with history films they keep complaining about their numerous and avoidable anachronisms which render them worthless for any serious discussion of history. The study pursues a threefold project from here on: it first tries to develop some hints concerning the status of anachronisms for modern western historiography by a close reading of texts on the theory of history. Second it asks about the role of anachronisms in history films. And it thirdly investigates the epistemic potential of anachronistic history films. One of the study’s main theses is that anachronisms are the crucial points of historiographies at which their media can be observed. This observation is here done with the help of some key concepts of Actor Network Theory (ANT). The study is structured into four chapters that each discuss one of the ANT concepts and analyse one film in depth. The following films are discussed here: Shutter Island (Martin Scorsese, 2010), Chronik der Anna Magdalena Bach (Jean-Marie Straub/Danièle Huillet, 1968), Cleopatra (Joseph L. Mankiewicz, 1963) und Caravaggio (Derek Jarman, 1986). Theoretical positions on historiography and anachronisms by the following scholars are assesed: Walter Benjamin, Leo Bersani, Georges Didi-Huberman, Siegfried Kracauer, Friedrich Meinecke, Friedrich Nietzsche, Jacques Rancière, Leopold Ranke, Paul Ricœur, Georg Simmel, Hayden White etc. KW - Geschichtsschreibung KW - Anachronismus KW - Actor-Network-Theory KW - Historischer Film Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121219-17991 ER - TY - CHAP A1 - Musial, Michal A1 - Ubysz, Andrzej A1 - Ulatowski, Piotr ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - MODEL DESCRIBING STATIC AND DYNAMIC DISPLACEMENTS OF SILOS WALL DURING THE FLOW OF LOOSE MATERIAL T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Correct evaluation of wall displacements is a key matter when designing silos. This issue is important from both the standpoint of design engineer (load-bearing capacity of structures) and end-consumer (durability of structures). Commonplace methods of silo design mainly focus on satisfying limit states of load-bearing capacity. Current standards fail to specify methods of dynamic displacements analysis. Measurements of stressacting on silo walls prove that the actual stress is sum of static and dynamic stresses. Janssen came up with differential equation describing state of static equilibrium in cross-section of a silo. By solving the equation static stress of granular solid on silo walls can be determined. Equations of motion were determined from equilibrium equations of feature objects. General solution, describing dynamic stresses was presented as parametric model. This paper presents particular integrals of differential equation, which enable analysing displacements and vibrations for different rigidities of silo walls, types of granular solid and its flow rate. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27896 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Karaki, Ghada ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - DEPENDENCY OF THE INFLUENCE OF INPUT PARAMETERS OF BVI MODELS ON THE INITIAL EXCITATIONS AND SPEED RANGES T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - Bridge vibration due to traffic loading has been subject of extensive research in the last decades. Such studies are concerned with deriving solutions for the bridge-vehicle interaction (BVI) and analyzing the dynamic responses considering randomness of the coupled model’s (BVI) input parameters and randomness of road unevenness. This study goes further to examine the effects of such randomness of input parameters and processes on the variance of dynamic responses in quantitative measures. The input parameters examined in the sensitivity analysis are, stiffness and damping of vehicle’s suspension system, axle spacing, and stiffness and damping of bridge. This study also examines the effects of the initial excitation of a vehicle on the influences of the considered input parameters. Variance based sensitivity analysis is often applied to deterministic models. However, the models for the dynamic problem is a stochastic one due to the simulations of the random processes. Thus, a setting using a joint meta-model; one for the mean response and other for the dispersion of the response is developed. The joint model is developed within the framework of Generalized Linear Models (GLM). An enhancement of the GLM procedure is suggested and tested; this enhancement incorporates Moving Least Squares (MLS) approximation algorithms in the fitting of the mean component of the joint model. The sensitivity analysis is then performed on the joint-model developed for the dynamic responses caused by BVI. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27675 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Morais, Joao A1 - Georgiev, Svetlin ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - COMPLETE ORTHOGONAL SYSTEMS OF 3D SPHEROIDAL MONOGENICS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - In this paper we review two distint complete orthogonal systems of monogenic polynomials over 3D prolate spheroids. The underlying functions take on either values in the reduced and full quaternions (identified, respectively, with R3 and R4), and are generally assumed to be nullsolutions of the well known Riesz and Moisil Théodoresco systems in R3. This will be done in the spaces of square integrable functions over R and H. The representations of these polynomials are explicitly given. Additionally, we show that these polynomial functions play an important role in defining the Szegö kernel function over the surface of 3D spheroids. As a concrete application, we prove the explicit expression of the monogenic Szegö kernel function over 3D prolate spheroids. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27785 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Musial, Michal A1 - Kamiński, Mieczysław A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - DISCRETE CRACK MODEL OF BORCZ FOR CALCULATING THE DEFLECTIONS OF BENDING REINFORCED CONCRETE BEAM T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - In the design of the reinforced concrete beams loaded by the bending moment, it is assumed that the structure can be used at a level of load, that there are local discontinuities - cracks. Designing the element demands checking two limit states of construction, load capacity and usability. Limit states usability include also the deflection of the element. Deflections in the reinforced concrete beams with cracks are based on actual rigidity of the element. After cracking there is a local change in rigidity of the beam. The rigidity is variable in the element’s length and due to the heterogeneous structure of concrete, it is not possible to clearly describe those changes. Most standards of testing methods tend to simplify the calculations and take the average value of the beam’s rigidity on its entire length. The rigidity depends on the level of the maximal load of the beam. Experimental researches verify the value by inserting the coefficients into the formulas used in the theory of elasticity. The researches describe the changes in rigidity in the beam’s length more precisely. The authors take into consideration the change of rigidity, depending on the level of maximum load (continuum models), or localize the changes in rigidity in the area of the cracks (discrete models). This paper presents one of the discrete models. It is distinguished by the fact that the left side of the differential equation, that depends on the rigidity, is constant, and all effects associated with the scratches are taken as the external load and placed on the right side of the equation. This allows to generalize the description. The paper presents a particular integral of the differential equation, which allow analyzing the displacement and vibration for different rigidity of the silo’s walls, the flow rate and type of the flowing material. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27907 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Musial, Michal A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - ROTATIONAL DUCTILITY OF CRACK IN STATIC AND DYNAMIC CALCULATIONS OF REINFORCED CONCRETE BAR STRUCTURES T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - In this paper experimental studies and numerical analysis carried out on reinforced concrete beam are partially reported. They aimed to apply the rigid finite element method to calculations for reinforced concrete beams using discrete crack model. Hence rotational ductility resulting from crack occurrence had to be determined. A relationship for calculating it in static equilibrium was proposed. Laboratory experiments proved that dynamic ductility is considerably smaller. Therefore scaling of the empirical parameter was carried out. Consequently a formula for its value depending on reinforcement ratio was obtained. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27813 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Simsek, Yilmaz ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - ON INTERPOLATION FUNCTION OF THE BERNSTEIN POLYNOMIALS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - The Bernstein polynomials are used for important applications in many branches of Mathematics and the other sciences, for instance, approximation theory, probability theory, statistic theory, num- ber theory, the solution of the di¤erential equations, numerical analysis, constructing Bezier curves, q-calculus, operator theory and applications in computer graphics. The Bernstein polynomials are used to construct Bezier curves. Bezier was an engineer with the Renault car company and set out in the early 1960’s to develop a curve formulation which would lend itself to shape design. Engineers may …nd it most understandable to think of Bezier curves in terms of the center of mass of a set of point masses. Therefore, in this paper, we study on generating functions and functional equations for these polynomials. By applying these functions, we investigate interpolation function and many properties of these polynomials. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27867 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Suzuki, Osamu A1 - Lawrynowicz, Julian A1 - Nouno, Kiyoharu A1 - Nagayama, Daiki ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - BINARY AND TERNARY CLIFFORD ANALYSIS ON NONION ALGEBRA AND SU(3) T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - A concept of non-commutative Galois extension is introduced and binary and ternary extensions are chosen. Non-commutative Galois extensions of Nonion algebra and su(3) are constructed. Then ternary and binary Clifford analysis are introduced for non-commutative Galois extensions and the corresponding Dirac operators are associated. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27880 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Hartmann, Frank T1 - Zwischen Leibniz und Google - Otlet der Weltbibliothekar T2 - Vom Buch zur Datenbank. Paul Otlets Utopie der Wissensvisualisierung N2 - Gegen Ende des 19. Jahrhunderts geriet das Dokumentationswesen in eine Krise: wie lässt sich das kulturelle Wissen nachhaltiger organisieren? Paul Otlet (1868–1944), ein belgischer Industriellenerbe und studierter Rechtsanwalt, entwickelte zusammen mit Henri La Fontaine ab 1895 ein Ordnungs- und Klassifikationssystem, das das millionenfach publizierte „Weltwissen“ dokumentieren sollte. Otlets Anspruch war die Schaffung eines „Instrument d’ubiquité“, das zur „Hyper-Intelligence“ führen sollte. Jahrzehnte vor Web und Wikis weisen diese Ideen auf eine globale Vernetzung des Wissens hin. Der vorliegende Titel erinnert an den Pionier Paul Otlet mit einer ausführlichen Einleitung von Frank Hartmann (Bauhaus-Universität Weimar), Beiträgen von W. Boyd Rayward (University of Illinois), Charles van den Heuvel (Königlich Niederländische Akademie der Wissenschaften) und Wouter Van Acker (Universität Gent). KW - philosophy KW - documentation KW - Enzyklopädie Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140811-22685 SP - 11 EP - 61 PB - Avinus CY - Berlin ER - TY - GEN A1 - Simon-Ritz, Frank A1 - Liehr, Harald S. T1 - Das Urheberrecht - ein Pulverfass für Lehre und Forschung N2 - Radiodiskussion bei bauhaus.fm am 5. November 2012. Harald S. Liehr ist Lektor und Leiter der Niederlassung Weimar des Böhlau-Verlags (Wien / Köln / Weimar), Dr. Frank Simon-Ritz ist Direktor der Universitätsbibliothek der Bauhaus-Universität Weimar. Die Fragen stellten René Tauschke und Jean-Marie Schaldach. KW - Urheberrecht Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121130-17753 ER - TY - CHAP A1 - Gonzalez Calvet, Ramon ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - NEW FOUNDATIONS FOR GEOMETRIC ALGEBRA T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - New foundations for geometric algebra are proposed based upon the existing isomorphisms between geometric and matrix algebras. Each geometric algebra always has a faithful real matrix representation with a periodicity of 8. On the other hand, each matrix algebra is always embedded in a geometric algebra of a convenient dimension. The geometric product is also isomorphic to the matrix product, and many vector transformations such as rotations, axial symmetries and Lorentz transformations can be written in a form isomorphic to a similarity transformation of matrices. We collect the idea that Dirac applied to develop the relativistic electron equation when he took a basis of matrices for the geometric algebra instead of a basis of geometric vectors. Of course, this way of understanding the geometric algebra requires new definitions: the geometric vector space is defined as the algebraic subspace that generates the rest of the matrix algebra by addition and multiplication; isometries are simply defined as the similarity transformations of matrices as shown above, and finally the norm of any element of the geometric algebra is defined as the nth root of the determinant of its representative matrix of order n×n. The main idea of this proposal is an arithmetic point of view consisting of reversing the roles of matrix and geometric algebras in the sense that geometric algebra is a way of accessing, working and understanding the most fundamental conception of matrix algebra as the algebra of transformations of multilinear quantities. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27644 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Hitzer, Eckhard ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - THE CLIFFORD FOURIER TRANSFORM IN REAL CLIFFORD ALGEBRAS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - We briefly review and use the recent comprehensive research on the manifolds of square roots of −1 in real Clifford geometric algebras Cl(p,q) in order to construct the Clifford Fourier transform. Basically in the kernel of the complex Fourier transform the complex imaginary unit j is replaced by a square root of −1 in Cl(p,q). The Clifford Fourier transform (CFT) thus obtained generalizes previously known and applied CFTs, which replaced the complex imaginary unit j only by blades (usually pseudoscalars) squaring to −1. A major advantage of real Clifford algebra CFTs is their completely real geometric interpretation. We study (left and right) linearity of the CFT for constant multivector coefficients in Cl(p,q), translation (x-shift) and modulation (w -shift) properties, and signal dilations. We show an inversion theorem. We establish the CFT of vector differentials, partial derivatives, vector derivatives and spatial moments of the signal. We also derive Plancherel and Parseval identities as well as a general convolution theorem. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27652 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Trommershausen, Anke T1 - Die schwerelose Ökonomie auf der Suche nach ihrem Gewicht : wissenschaftliche E-Books in den USA T2 - Alles digital? : E-Books in Studium und Lehre N2 - Beitrag während der Weimarer EDOC-Tage 2011 KW - Elektronisches Buch KW - Studium KW - Schwerelose Ökonomie KW - Buchmarkt Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120404-15987 SP - 80 EP - 92 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - JOUR A1 - Kalisch, Dominik T1 - Wissen wer wo wohnt N2 - In cities people live together in neighbourhoods. Here they can find the infrastructure they need, starting with shops for the daily purpose to the life-cycle based infrastructures like kindergartens or nursing homes. But not all neighbourhoods are identical. The infrastructure mixture varies from neighbourhood to neighbourhood, but different people have different needs which can change e.g. based on the life cycle situation or their affiliation to a specific milieu. We can assume that a person or family tries to settle in a specific neighbourhood that satisfies their needs. So, if the residents are happy with a neighbourhood, we can further assume that this neighbourhood satisfies their needs. The socio-oeconomic panel (SOEP) of the German Institute for Economy (DIW) is a survey that investigates the economic structure of the German population. Every four years one part of this survey includes questions about what infrastructures can be found in the respondents neighbourhood and the satisfaction of the respondent with their neighbourhood. Further, it is possible to add a milieu estimation for each respondent or household. This gives us the possibility to analyse the typical neighbourhoods in German cities as well as the infrastructure profiles of the different milieus. Therefore, we take the environment variables from the dataset and recode them into a binary variable – whether an infrastructure is available or not. According to Faust (2005), these sets can also be understood, as a network of actors in a neighbourhood, which share two, three or more infrastructures. Like these networks, this neighbourhood network can also be visualized as a bipartite affiliation network and therefore analysed using correspondence analysis. We will show how a neighbourhood analysis will benefit from an upstream correspondence analysis and how this could be done. We will also present and discuss the results of such an analysis. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 11 KW - urban planning KW - cluster analysis KW - urban research-quantitative KW - complex data analysis KW - singular value decomposition Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26695 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Aguinaga, José Guillermo De T1 - Error in prediction due to data type availability in a coupled hydro-mechanical model JF - Electronic Journal of Geotechnical Engineering N2 - Different types of data provide different type of information. The present research analyzes the error on prediction obtained under different data type availability for calibration. The contribution of different measurement types to model calibration and prognosis are evaluated. A coupled 2D hydro-mechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are identified by scaled sensitivities. Then, Particle Swarm Optimization is applied to determine the optimal parameter values and finally, the error in prognosis is determined. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain the actual prediction errors. The analyses presented here were performed calibrating the hydro-mechanical model to 31 data sets of 100 observations of varying data types. The prognosis results improve when using diversified information for calibration. However, when using several types of information, the number of observations has to be increased to be able to cover a representative part of the model domain. For an analysis with constant number of observations, a compromise between data type availability and domain coverage proves to be the best solution. Which type of calibration information contributes to the best prognoses could not be determined in advance. The error in model prognosis does not depend on the error in calibration, but on the parameter error, which unfortunately cannot be determined in inverse problems since we do not know its real value. The best prognoses were obtained independent of calibration fit. However, excellent calibration fits led to an increase in prognosis error variation. In the case of excellent fits; parameters' values came near the limits of reasonable physical values more often. To improve the prognoses reliability, the expected value of the parameters should be considered as prior information on the optimization algorithm. KW - Sensitivitätsanalyse KW - Damm KW - Embankment, sensitivity analysis, parameter identification, Particle Swarm Optimization KW - Fehlerabschätzung Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31170 UR - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84868020397&partnerID=40&md5=72c87bb112839303c1ef9a4afa8c6421 SP - 2459 EP - 2471 ER - TY - THES A1 - Ifesanya, Kunle T1 - The Role of Government Agencies in Urban Housing Delivery in Lagos T1 - Die Rolle der staatlichen Institutionen in der urbane Wohnungsbeschaffung in der Stadt Lagos N2 - There is a continuous exacerbation of environmental problems in big cities of today’s world, thereby, diminishing the quality of life in them. Of particular concern is the fact that today’s megacities are evolving in the developing world without corresponding growth in the economy, infrastructure and other human development indices. As urban population continues to grow in these cities of the Global South, governing institutions are usually unable to keep pace with their social responsibilities, thus, making the issue of urban governance very critical. This is because effective and efficient urban governance is highly essential for the creation, strengthening and sustenance of governing institutions. Lagos, a mega-city of over 15.45 million people and the most populous metropolitan area on the African continent epitomizes the fundamental grave characteristics of the emerging megacities of the Global South, thereby, constituting an apt choice in understanding the emerging megacities of the next generation. Two out of every three Lagos residents live in slums and de-humanizing physical and social conditions. Many of them sleep, work, eat and cook under highway bridges, at the mercy of weather elements. This research, therefore, evaluated urban governance through housing administration in Africa’s largest megacity. It examines the extent of housing problems in the city, the causal factors and the culpability of government agencies statutorily responsible for the provision, control and management of housing development in Lagos - the tenth largest city in the world. A representative geographic part of the city which manifests classic characteristics of slum life, listed by Mike Davis as the largest slum in Africa and the 6th largest in the world – Ajegunle - was adopted for case study. The research design combined rigorous literature search (desk research) with quantitative and, especially, qualitative approaches to data collection. The qualitative approach was more intensely adopted because government officials often respond to enquiries with ‘official answers and data’ which may not be reliable and the study had to rely on keen observation of physical traces, social interaction and personal investigation. The cross-sectional research method was adopted. Information was solicited from house-owners, building industry professionals, sociologists and officials of relevant government agencies, through research tools like questionnaires, interviews, focused group discussions and personal observations. The analysis and discussion of these field data, in conjunction with the information from the desk research gave a better understanding of the status-quo, which informed the recommendations proposed in the dissertation for mitigating the problems. The research discovered that many of the statutory housing agencies have the capacity to effectively discharge their responsibilities. However, it was also shown that corruption and abdication of responsibilities by the staff of these agencies constitute primary causes of the chasm between the anticipated lofty outcome from the laudable building regulations/bye-laws and the appalling reality. It also discovered that lack of political will and apathy on the part of successive Governments of Lagos State to the improvement of housing conditions of the poor masses are major causes of the housing debacle in Lagos. Several germane and realistic recommendations for redressing the situation were subsequently proffered. These include amongst others, the conduction of an accurate census for Lagos, in conjunction with credible international agencies, as a requisite basis for effective planning of any sort. The process of obtaining legal titles for land should also be made less cumbersome, while the housing administration process should be computerized; in order to reduce inter-personal contacts between applicants and government officials to the barest minimum, as a means of curbing the wide spread corruption in the system. KW - Housing KW - Urban governance KW - Housing KW - Urban governance KW - Slums KW - Lagos Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121115-17619 ER - TY - THES A1 - Krishnamurthy, Sukanya T1 - Reading Architecture - Remembering - Forgetting interplay: Development of a Framework to Study Urban and Object Level Cases N2 - This thesis explores how architecture aids in the performance of open-ended narratives by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architecture old and new stems from specific cultural and social forms, and is dictated by processes of remembering and forgetting. It is through interaction (between inhabitant and object) that architecture is given innate meanings within an urban environment that makes its role in the interplay one of investigative interest. To enable the study of this performance, I develop a framework based on various theoretical paradigms to investigate three broad questions: 1) How does one study the performance of memory and forgetting through architecture in dynamic urban landscapes? 2) Is there a way to identify markers and elements within the urban environment that enable such a study? 3) What is the role that urban form plays within this framework and does the transformation of urban form imply the transformation of memory and forgetting? The developed framework is applied to a macro (an urban level study of Bangalore, India) and micro level study (a singular or object level study of Stari Most/ Old Bridge, Mostar, BiH), to analyse the performance of remembering and forgetting in various urban spheres through interaction with architecture and form. By means of observations, archival research, qualitative mapping, drawings and narrative interviews, the study demonstrates that certain sites and characteristics of architecture enable the performance of remembering and the questioning of forgetting by embodying features that support this act. Combining theory and empirical studies this thesis is an attempt to elucidate on the processes through which remembering and forgetting is initiated and experienced through architectural forms. The thesis argues for recognising the potential of architecture as one that embodies and supports the performance of memory and forgetting, by acting as an auratic contact zone. KW - Stadtlandschaft KW - Erinnerung KW - Vergessen KW - Städtischer Raum KW - Stadtgestalt Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121219-18025 ER - TY - CHAP A1 - Motra, Hem Bahadur A1 - Dimmig-Osburg, Andrea A1 - Hildebrand, Jörg ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - UNCERTAINTY QUANTIFICATION IN CYCLIC CREEP PREDICTION OF CONCRETE T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - This paper presents a methodology for uncertainty quantification in cyclic creep analysis. Several models- , namely BP model, Whaley and Neville model, modified MC90 for cyclic loading and modified Hyperbolic function for cyclic loading are used for uncertainty quantification. Three types of uncertainty are included in Uncertainty Quantification (UQ): (i) natural variability in loading and materials properties; (ii) data uncertainty due to measurement errors; and (iii) modelling uncertainty and errors during cyclic creep analysis. Due to the consideration of all type of uncertainties, a measure for the total variation of the model response is achieved. The study finds that the BP, modified Hyperbolic and modified MC90 are best performing models for cyclic creep prediction in that order. Further, global Sensitivity Analysis (SA) considering the uncorrelated and correlated parameters is used to quantify the contribution of each source of uncertainty to the overall prediction uncertainty and to identifying the important parameters. The error in determining the input quantities and model itself can produce significant changes in creep prediction values. The variability influence of input random quantities on the cyclic creep was studied by means of the stochastic uncertainty and sensitivity analysis namely the Gartner et al. method and Saltelli et al. method. All input imperfections were considered to be random quantities. The Latin Hypercube Sampling (LHS) numerical simulation method (Monte Carlo type method) was used. It has been found by the stochastic sensitivity analysis that the cyclic creep deformation variability is most sensitive to the Elastic modulus of concrete, compressive strength, mean stress, cyclic stress amplitude, number of cycle, in that order. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27803 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - THES A1 - Keitel, Holger T1 - Bewertungsmethoden für die Prognosequalität von Kriechmodellen des Betons T1 - Evaluation Methods for Prediction Quality of Concrete Creep Models N2 - Ziel dieser Arbeit ist die Entwicklung von Methoden, mit denen die Prognosequalität von Kriechmodellen des Betons bestimmt werden kann. Die Methoden werden in zwei Ausgangsszenarien unterschieden: die Bewertung ohne und die Bewertung mit Verwendung von spezifischen Versuchsdaten zum Kriechverhalten des Betons. Die Modellqualität wird anhand der Gesamtunsicherheit der prognostizierten Kriechnachgiebigkeit quantifiziert. Die Unsicherheit wird für die Kriechprognose ohne Versuchsdaten über eine Unsicherheitsanalyse unter Berücksichtigung korrelierter Eingangsparameter ermittelt. Bei der Verwendung experimenteller Daten werden die stochastischen Eigenschaften der Modellparameter mittels Bayesian Updating bestimmt. Die Bewertung erfolgt erneut basierend auf einer Unsicherheitsanalyse sowie alternativ mittels Modellselektion nach Bayes. Weiterhin wird eine auf Graphentheorie und Sensitivitätsanalysen basierende Methode zur Bewertung von gekoppelten Partialmodellen entwickelt. Damit wird der Einfluss eines Partialmodells auf das Verhalten einer globalen Tragstruktur quantifiziert, Interaktionen von Partialmodellen festgestellt und ein Maß für die Qualität eines Gesamtmodells ermittelt. N2 - The goal of this doctoral thesis is the development of methods for the evaluation of the prediction quality of concrete creep models. The methods are distinguished into two scenarios: the evaluation with and without experimental data about the creep behavior of concrete. The model quality is quantified by the total uncertainty of the predicted creep compliance. The uncertainty of the creep prognosis without using measurement data is quantified by an uncertainty analysis taking into account the parameter correlation. When experimental data is considered the stochastic properties of the creep model parameters are found by means of Bayesian Updating. The evaluation is once more based on an uncertainty analysis or, alternatively, applying Bayesian model selection. Further, an assessment method of coupled partial models based on graph theory and sensitivity analysis is developed. Therewith, the influence of classes of partial models on the global model response is quantified, interactions of partial models are detected, and a measure for the quality of the global model is derived. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 2 KW - Kriechen KW - Bewertung KW - Prognosequalität KW - Bayes-Inferenz KW - Unsicherheitsanalyse KW - Gekoppelte Modelle KW - Coupled models KW - Bewertungsmethode KW - Evaluation methods Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120207-15569 SN - 978-3-86068-466-5 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER -