TY - THES A1 - Ma, Hang T1 - "Villages" in Shenzhen- Persistence and Transformation of an Old Social System in an Emerging Megacity N2 - In the history of 'villages' in Shenzhen, rich traditional cultural resources that are directly related to the folk life in urban corporate community still exist today, synchronously agricultural economy of urban corporate community is transformed into joint-stock economy, and natural villages are transformed into 'heterogeneous' space of city. The most significant fact in the modern social transition is that modern societies have surpassed traditional societies, and cities have surpassed the country. Weber, Durkheim, Tönnies, Simmel and others devoted themselves to cultivating the essence of social transition. The most influential theory to observe and analyze it is the two-tiered approach of ideal type. Tönnies made distinction between 'Gemeinschaft and Gesellschaft', Durkheim distinguished 'mechanical solidarity and organic solidarity', and Redfield analyzed 'folk society and urban society'. In those classical theories, the former transit to the later is considered to be a general rule of transition from traditional society to modern society, and from traditional community to modern community. However, ever since Redfield used the dependent relationship and interactive framework of 'great tradition' and 'little tradition' to explain various complicated phenomena in the transition from tradition to modern in 1950s, he suggested that a folk-urban continuum can be formed in the transition from folk society to urban society. 'Both terms, ‘city’ and ‘country’, are not and have never been limited or restricted to their obvious denotations: ‘city’ is not and has never been only urban. As a category it always encompasses (includes, embodies, embraces) itself and its opposite, the country' (Hassenpflug 2002, 46). Generally, social groups and culture characterized by weak 'potential' will take their own 'little tradition' as 'bridge' and agency, in order to enter or melt themselves into a 'great tradition' that embodies great 'potential' to seek for space to live and develop. There are many different types of transitions that villagers enter and get melt into 'great tradition' through their individual 'little tradition'. There are exploration and development of traditional resources in 'segmentation', such as the frequent relation between a great flow of peasants to cities and the network of kinship, and of earthbound relations; alternatively, there are assistances and utilization of resources of a whole corporate network, such as the traditional corporate community’s organization of local resources during the process of non-agriculturization of villages; and 'villages' in Shenzhen is of the latter situation. The following conclusion can be made based on the above analyses: urban corporate community formed in the process of non-agricultural development and urbanization is an organizing dependency on which villagers melt into city and adapt to urban life. The unique inner-structure and function determine that comparing with other organizations, it has a better performance, efficiency and more humanity care. Firstly, corporate community which is re-organized in the non-agricultural process currently is the only and the most effective organizational resources that can be utilized and has significant meanings in protecting villagers’ interest and benefit; secondly, in the short term, other approaches do not have the advantage and the effect as urban corporate community has on the focusing degree of public affairs in the comprehensive urbanization process; thirdly, the 'new' key connotation of urban corporate community, including its community management functions, is the main reason for which such community has the rationality of being; fourthly, urban corporate community will inevitably face many problems in the urbanization due to its inner fixed characteristics (lack of external support), but to a certain degree it has the ability to self-repair and problem solving under the precondition that, the government and society have a fair, impersonal view of 'villages', and base on this view providing multi-supports, especially providing rational system arrangement and policy supports. Consequently, in order to preserve and protect social system and cultural heritage within the 'villages', and gradually make the coordinative development of 'great tradition' represented by cities and of 'little tradition' represented by 'villages', 'soft reconstruction' rather than 'hard reconstruction' should be adopted by the government, during the recent reconstruction of 'villages' in Shenzhen. N2 - In den Dörfern in Shenzhen existieren bis heute viele traditionelle kulturelle Ressourcen, die direkt Bezug nehmen auf das Alltagsleben in der städtischen Gemeinschaft. Gleichzeitig wird die landwirtschaftlich geprägte Wirtschaft der städtischen Gemeinschaft in eine 'joint-stock'-Wirtschaft transformiert und traditionelle Dörfer werden zu heterogenen Stadträumen. Der wichtigste Faktor in den modernen sozialen Veränderungen ist die Tatsache, dass die Moderne die Tradition und die Städte die ruralen Räume überholen. Weber, Durkheim, Tönnies, Simmel und andere haben über diese sozialen Veränderungen geforscht. Die einflussreichste Theorie der Beobachtung und Analyse ist der zweistufige Idealtyp-Ansatz. Tönnies unterschied zwischen 'Gemeinschaft' und 'Gesellschaft', Durkheim sah Unterschiede zwischen 'mechanischer Solidarität' und 'organischer Solidarität' und Redfield analysierte die Landbevölkerung und die Stadtbevölkerung. Grundansatz dieser klassischen Theorien ist die Transformation von einer traditionellen zu einer modernen Gesellschaft und von einer traditionellen Gemeinschaft zu einer modernen Gemeinschaft. Wie dem auch sei, seit Redfield das Abhängigkeitsverhältnis und den interaktiven Rahmen von 'great tradition' und 'little tradition' benutzt hat, um komplizierte Transitionsphänomene von der Tradition zur Moderne zu erklären, schlug er die Existenz eines Land-Stadt-Kontinuums vor, dass bei dem Wechsel von einer ländlichen zur einer städtischen Gesellschaft entstehen kann. Beide Begriffe, 'Stadt' und 'Land' sind nicht und waren niemals beschränkt auf ihre offensichtliche Bedeutung: 'Stadt' ist nicht und war nie nur auf das urbane beschränkt. Als Kategorie enthielt „Stadt“ immer sich selbst und auch das Gegenteil, das 'Land' (Hassenpflug 2002, 46). Im Allgemeinen werden soziale Gruppen, die durch schwaches 'Potenzial' gekennzeichnet sind, ihre eigene 'little tradition' als Brücke oder Mittel nutzen, um in eine 'great tradition' einzutreten, die ein großes 'Potenzial' zur Suche nach Raum zum Leben und zu Entwickeln besitzt. Es gibt viele unterschiedliche Erscheinungsformen, wenn Dorfbewohner durch ihre eigene 'little tradition' in eine 'great tradition' eintreten und sich vermischen. Es gibt die Entdeckung und Entwicklung traditioneller Ressourcen der 'Segmentation', wie z.B. die enge Verbindung zwischen den großen Strömen von Bauern, die in Richtung der Städte ziehen und dem Verwandtschafts-Netzwerk und 'Earthbound'-Verhältnissen. Andererseits gibt es auch die Unterstützung und Nutzung der Ressourcen eines kompletten 'Corporate'-Netzwerks wie die traditionelle Organisation der Dorfgemeinschaft während der Prozesse der De-Agrarisierung von Dörfern; und in den Dörfern in Shenzhen existiert diese Situation. Die oben dargestellten Ausführungen ergeben folgende Schlussfolgerungen: Die städtische Gemeinschaft, die im Prozess der De-Agrarisierung und Urbanisierung geformt wurde ist ein Faktor, der dazu führt, dass die Dorfbewohner mit der Stadt 'verschmelzen' und das Stadtleben adaptieren. Im Vergleich zu anderen Organisationsstrukturen führt die besondere innere Struktur und Funktion zu dieser Verschmelzung: Es gibt eine bessere Performance, höhere Effektivität und mehr Fürsorge. Erstens ist die Gemeinschaft, die im De-Agrarisierungsprozesse reorganisiert wird, momentan die einzige und effektivste Organisations-Ressource, die genutzt werden kann und die eine wichtige Bedeutung für den Schutz der Interessen der Dorfbewohner hat. Zweitens haben andere Ansätze kurzfristig nicht die Vorteile und Effekte, die städtische Gemeinschaft in Bezug auf die öffentlichen Angelegenheiten im gesamten Urbanisierungsprozess haben. Drittens liegt die neue Schlüsselbedeutung der städtischen Gemeinschaft in ihren Managementfunktionen. Viertens stehen die städtischen Gemeinschaften zwar zweifellos vor vielen Problemen im Rahmen des Urbanisierungsprozesses aufgrund ihrer inneren Strukturen (fehlende Unterstützung von außen), aber zu einem gewissen Grad haben sie die Möglichkeit zur Selbstreparatur und zum Problem-Lösen unter der Vorrausetzung, dass die Regierung und die Gesellschaft eine fairen, unpersönlichen Blick auf die Dörfer haben und in Folge dessen unterschiedliche Unterstützung bereitstellen, vor allem in bezug auf rationale 'System-Arrangements' und politischer Unterstützung. Konsequenterweise sollte zur Erhaltung und zum Schutz des sozialen Systems und des kulturellen Erbes in den Dörfern, sowie zur stufenweise koordinierten Entwicklung der 'great tradition' der Städte und der 'little tradition' der Dörfer eher 'soft reconstruction' anstatt 'hard reconstruction' von der Regierung beim Wiederaufbau der Dörfer in Shenzhen angewandt werden. T2 - Die Dörfer in Shenzhen- Transformation eines traditionellen Sozialsystems im Prozess chinesischer Mega- Urbanisierung KW - China KW - Dörfer KW - traditionellen Sozialsystem KW - Urbanisierung KW - Megastadt KW - traditional social system KW - urbanization KW - megacity Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060806-8094 ER - TY - RPRT A1 - Gross, Tom A1 - Oemig, Christoph T1 - 'Sorry, Pal---What I See is Usually Not What You Get!': The Role of Reciprocity in Information Disclosure N2 - For efficient distant cooperation the members of workgroups need information about each other. This need for information disclosure often conflicts with the users' wishes for privacy. In the literature often reciprocity is suggested as a solution to this trade-off. Yet, this conception of reciprocity and its enforcement by systems does not match reality. In this paper we present our study's major findings investigating the role of reciprocity among which we found that participants greatly disregarded the above conception. Additionally we discuss their significant implications for the design of systems seeking to disclose personal information. KW - Angewandte Informatik KW - Awareness KW - Gruppengewahrsein KW - Privatsphaere KW - Reziprozitaet KW - Awareness KW - information sharing KW - privacy KW - reciprocity Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7474 ER - TY - CHAP A1 - Stahr, Alexander A1 - Ruth, Jürgen A1 - Wolkowicz, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ... WITHOUT RIGHT ANGLE. N2 - Currently sculptural design is one of the most discussed themes in architecture. Due to their light weight, easy transportation and assembly, as well as an almost unlimited structural variety, parameterised spatial structures are excellently suited for constructive realisation of free formed claddings. They subdivide the continuous surface into a structure of small sized nodes, straight members and plane glass panels. Thus they provide an opportunity to realise arbitrary double-curved claddings with a high degree of transparency, using industrial semi-finished products (steel sections, flat glass). Digital design strategies and a huge number of similar looking but in detail unique structural members demand a continuous digital project handling. Within a research project, named MYLOMESH, a free-formed spatial structure was designed, constructed, fabricated and assembled. All required steps were carried out based on digital data. Different digital connections (scripts) between varying software tools, which are usually not used in the planning process of buildings, were created. They allow a completely digital workflow. The project, its design, meshing, constructive detailing and the above-mentioned scripts are described in this paper. KW - Architektur KW - CAD KW - Arthur Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30248 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Cruz, J. F. A1 - Falcão, M. Irene A1 - Malonek, Helmuth Robert ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - 3D-MAPPINGS AND THEIR APPROXIMATION BY SERIES OF POWERS OF A SMALL PARAMETER N2 - In classical complex function theory the geometric mapping property of conformality is closely linked with complex differentiability. In contrast to the planar case, in higher dimensions the set of conformal mappings is only the set of Möbius transformations. Unfortunately, the theory of generalized holomorphic functions (by historical reasons they are called monogenic functions) developed on the basis of Clifford algebras does not cover the set of Möbius transformations in higher dimensions, since Möbius transformations are not monogenic. But on the other side, monogenic functions are hypercomplex differentiable functions and the question arises if from this point of view they can still play a special role for other types of 3D-mappings, for instance, for quasi-conformal ones. On the occasion of the 16th IKM 3D-mapping methods based on the application of Bergman's reproducing kernel approach (BKM) have been discussed. Almost all authors working before that with BKM in the Clifford setting were only concerned with the general algebraic and functional analytic background which allows the explicit determination of the kernel in special situations. The main goal of the abovementioned contribution was the numerical experiment by using a Maple software specially developed for that purpose. Since BKM is only one of a great variety of concrete numerical methods developed for mapping problems, our goal is to present a complete different from BKM approach to 3D-mappings. In fact, it is an extension of ideas of L. V. Kantorovich to the 3-dimensional case by using reduced quaternions and some suitable series of powers of a small parameter. Whereas until now in the Clifford case of BKM the recovering of the mapping function itself and its relation to the monogenic kernel function is still an open problem, this approach avoids such difficulties and leads to an approximation by monogenic polynomials depending on that small parameter. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29406 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Bock, Sebastian A1 - Gürlebeck, Klaus ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - A Coupled Ritz-Galerkin Approach Using Holomorphic and Anti-holomorphic Functions N2 - The contribution focuses on the development of a basic computational scheme that provides a suitable calculation environment for the coupling of analytical near-field solutions with numerical standard procedures in the far-field of the singularity. The proposed calculation scheme uses classical methods of complex function theory, which can be generalized to 3-dimensional problems by using the framework of hypercomplex analysis. The adapted approach is mainly based on the factorization of the Laplace operator EMBED Equation.3 by the Cauchy-Riemann operator EMBED Equation.3 , where exact solutions of the respective differential equation are constructed by using an orthonormal basis of holomorphic and anti-holomorphic functions. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29281 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Nour, Mohamed T1 - A Flexible Model for Incorporating Construction Product Data into Building Information Models N2 - When considering the integration and interoperability between AEC-FM software applications and construction products' data, it is essential to investigate the state-of-the-art and conduct an extensive review in the literature of both Building Information Models and electronic product catalogues. It was found that there are many reasons and key-barriers that hinder the developed solutions from being implemented. Among the reasons that are attributed to the failure of many previous research projects to achieve this integration aim are the proprietary developments of CAD vendors, the fragmented nature of construction product data i.e. commercial and technical data, the prefabrication versus on-site production, marketing strategies and brand-naming, the referencing of a product to the data of its constituents, availability of life-cycle data in a single point in time where it is needed all over the whole life-cycle of the product itself, taxonomy problems, the inability to extract search parameters from the building information model to participate in the conduction of parametric searches. Finally and most important is keeping the product data in the building information model consistent and up-to-date. Hence, it was found that there is a great potential for construction product data to be integrated to building information models by electronic means in a dynamic and extensible manner that prevents the model from getting obsolete. The study has managed to establish a solution concept that links continually updated and extensible life-cycle product data to a software independent building information model (IFC) all over the life span of the product itself. As a result, the solution concept has managed to reach a reliable building information model that is capable of overcoming the majority of the above mentioned barriers. In the meantime, the solution is capable of referencing, retrieving, updating, and merging product data at any point in time. A distributed network application that represents all the involved parties in the construction product value chain is simulated by real software tools to demonstrate the proof of concept of this research work. N2 - Die vorliegende Dissertation stellt ein flexibles und dynamisches Gebäudeinformationsmodell vor, mit dem die Produktinformationen der Bauteile erfragt und aktualisiert werden können. Dazu werden Beziehungen zwischen den Bauteilen im Gebäudeinformationsmodell und den Produktinformationen der Hersteller und Lieferanten definiert. Die Produktinformationen können über eindeutige Produktnamen und über verallgemeinerte Produktparameter identifiziert werden. Der Stand der Technik bei den digitalen Bauteilkatalogen besteht überwiegend in einer Beschreibung der Produkte in Dokumenten im HTML- oder PDF-Format. Diese Dokumente können mit Hilfe von Schlüsselwörtern durchsucht werden. Hierbei besteht das Problem, dass die Produktinformationen nicht dauerhaft den Objekten im Gebäudeinformationsmodell zuzuordnen sind. Demzufolge kann verfügbare CAD-Software die verwendeten Produkte der Bauteile nicht vollständig beschreiben. Da viele Prozesse aktuelle Informationen der Bauteilprodukte benötigen, ist eine Erweiterung vorhandener Gebäudeinformationsmodelle um diesen Aspekt erforderlich. Obwohl dies Gegenstand zahlreicher proprietärer Entwicklungen ist, ist der Austausch von Daten infolge fehlender Standardisierung nicht ohne Informationsverluste möglich. Diesem Thema widmen sich derzeit unabhängige Forschungsprojekte, in denen neue Taxonomien und Ontologien für die Beschreibung der Semantik von Bauteildaten auf Basis von XML entwickelt werden. Diese Lösungsansätze haben den Nachteil, dass die Produktinformationen der Hersteller und Lieferanten notwendigerweise in einer gemeinsamen Datenbasis gespeichert werden müssen. Die Untersuchung des Lebenszyklus von Bauwerken im Hinblick auf die Wertschöpfungskette und die Beschaffungskette ergab, dass die Informationen sowohl der Bauteile als auch der Produkte über die gesamte Lebensdauer des Bauwerks verfügbar sein müssen. Aus kaufmännischer Sicht besteht das Problem, dass die Produkte eines Herstellers unter verschiedenen Markennamen angeboten und verkauft werden. Untersuchungen haben gezeigt, dass der Markenname ein wesentlicher Faktor einer Marktstrategie ist. Auch die Zwischenhändler spielen hierbei eine wichtige Rolle – selbst dann, wenn die Geschäfte über das Internet abgewickelt werden. Bauteile haben die Besonderheit, dass sie teilweise oder ganz auf der Baustelle hergestellt werden. Dies muss bei der Konzeption eines Informationssystems, das sich mit der Wertschöpfungskette von Bauwerken befasst, beachtet werden. Eine Erkenntnis der vorliegenden Arbeit ist, dass eine parametrisierte Produktsuche nur möglich ist, wenn die Produkte eindeutige Namen und standardisierte Parameter besitzen. Dieser Lösungsansatz könnte die derzeitige Arbeitsweise in der Praxis ändern. Für die prototypische Umsetzung im Rahmen der Dissertation hat sich eine Abstützung auf das verfügbare IFC-Modell als besonders geeignet erwiesen, da dieses Modell nicht-proprietär, fachübergreifend sowie durch Eigenschaften erweiterbar ist. Der Kerngedanke des vorgestellten Lösungskonzepts besteht in der Entwicklung des OIP-Konzepts (Object Information Pack), welches eine dauerhafte und dynamische Datenquelle für Gebäudeinformationsmodelle behandelt. Die OIP ist nicht nur ein eindeutiger Produktname, sondern eine ganze Datenstruktur für Produktinformationen im Bauwesen. Die OIP besteht aus einer dreischichtigen Hierarchie, welche sich sowohl in der Struktur der Datenbasis als auch in der Struktur der Klassen widerspiegelt. Diese Struktur wird über eine Gruppe von Relationen vom OIP-Kern verwaltet. Das Format der OIP-Namen sowie die Verteilung der Daten zwischen den Beteiligten (produktunabhängige technische Daten und produktabhängige Daten der Lieferanten) sind die wesentlichen Neuerungen gegenüber den bekannten Ansätzen mit einer zentralen Datenbasis. Das in dieser Arbeit vorgestellte Lösungskonzept basiert auf einer eingehenden Betrachtung und Analyse der Beschaffungskette von Bauwerken unter Beachtung der Besonderheiten des Bauwesens. Es hat sich herausgestellt, dass das OIP-Konzept allein nicht ausreicht, um eine Brücke zwischen den Daten der Hersteller und Händler auf der einen und dem Kunden auf der anderen Seite zu schlagen. Darüber hinaus wurde eine integrierte Softwarelösung für die Umsetzung des Konzepts benötigt, die zum Zeitpunkt des Entstehens dieser Dissertation nicht verfügbar war. Daher hat der Autor Werkzeuge mit folgender Funktionalität entwickelt: Parsen von STEP-ISO-10303-P21-Dateien Interpretation der geparsten Daten in IFC2x-Java-Klassen Abbildung und Integration von Produktdaten in das IFC-Modell Instanziierung, Löschen und Änderung von Objekten Definition von Suchparametern durch den Anwender Extraktion von Suchparametern aus dem CAD/IFC-Model Durchführen von parametrisierten Suchen Bereitstellung verschiedener Arten der Visualisierung des IFC Modells Export des modifizierten IFC-Modells in Form einer STEP-P21-Datei Mit diesen Werkzeugen konnte das Konzept der Arbeit verifiziert werden. Aufgrund ihres flexiblen Entwurfs können diese Werkzeuge darüber hinaus auch bei anderen Problemstellungen im Zusammenhang mit dem IFC-Modell verwendet werden. Es handelt sich nämlich um einfache Werkzeuge, die eine Integration des IFC-Modells in andere Applikationen ermöglichen. Die Einführung des Konzepts in die Praxis erfordert die Verwaltung durch eine eigene Organisation. Die Rolle dieser OIP-Organisation und das Internetportal der Hersteller wurden ebenfalls innerhalb einer verteilten Applikation simuliert. Zur übersichtlichen Darstellung der Ergebnisse und zum Nachweis der Anwendbarkeit des Konzeptes wurden alle Werkzeuge mit einer graphischen Nutzeroberflächen ausgestattet. Schließlich möchte der Autor betonen, dass eine Übernahme eines solchen „Business Process Re-engeneering“ (BPR) Konzeptes in die industrielle Praxis nicht frei von Barrieren und Problemen ist. Aus der Literatur über Firmenkultur und Psychologie ist bekannt, dass Nutzer oft ablehnend auf die Einführung neuer Systeme reagieren, wenn diese die gewohnte Arbeitsweise in Frage stellen. Hierbei spielt es keine Rolle, ob das resultierende Ergebnis auf lange Sicht zu einer Optimierung und Reduzierung des Aufwands führt. Ein Wechsel der derzeitigen Praxis könnte jedoch erreicht werden, wenn einige innovative Unternehmen ihren Anwendern die Gelegenheit gäben, sich von den Vorteilen der neuen Arbeitsweise zu überzeugen. KW - Produktinformation KW - Bauteil KW - Informationsmodell KW - Construction Product data KW - IFC KW - BIM KW - Building Information Model Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060317-7781 ER - TY - CHAP A1 - Baitsch, Matthias A1 - Hartmann, Dietrich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - A FRAMEWORK FOR THE INTERACTIVE VISUALIZATION OF ENGINEERING MODELS N2 - Interactive visualization based on 3D computer graphics nowadays is an indispensable part of any simulation software used in engineering. Nevertheless, the implementation of such visualization software components is often avoided in research projects because it is a challenging and potentially time consuming task. In this contribution, a novel Java framework for the interactive visualization of engineering models is introduced. It supports the task of implementing engineering visualization software by providing adequate program logic as well as high level classes for the visual representation of entities typical for engineering models. The presented framework is built on top of the open source visualization toolkit VTK. In VTK, a visualization model is established by connecting several filter objects in a so called visualization pipeline. Although designing and implementing a good pipeline layout is demanding, VTK does not support the reuse of pipeline layouts directly. Our framework tailors VTK to engineering applications on two levels. On the first level it adds new – engineering model specific – filter classes to VTK. On the second level, ready made pipeline layouts for certain aspects of engineering models are provided. For instance there is a pipeline class for one-dimensional elements like trusses and beams that is capable of showing the elements along with deformations and member forces. In order to facilitate the implementation of a graphical user interface (GUI) for each pipeline class, there exists a reusable Java Swing GUI component that allows the user to configure the appearance of the visualization model. Because of the flexible structure, the framework can be easily adapted and extended to new problem domains. Currently it is used in (i) an object-oriented p-version finite element code for design optimization, (ii) an agent based monitoring system for dam structures and (iii) the simulation of destruction processes by controlled explosives based on multibody dynamics. Application examples from all three domains illustrates that the approach presented is powerful as well as versatile. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29194 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - INPR A1 - Wetzstein, Gordon A1 - Bimber, Oliver T1 - A Generalized Approach to Radiometric N2 - We propose a novel method that applies the light transport matrix for performing an image-based radiometric compensation which accounts for all possible types of light modulation. For practical application the matrix is decomposed into clusters of mutually influencing projector and camera pixels. The compensation is modeled as a linear system that can be solved with respect to the projector patterns. Precomputing the inverse light transport in combination with an efficient implementation on the GPU makes interactive compensation rates possible. Our generalized method unifies existing approaches that address individual problems. Based on examples, we show that it is possible to project corrected images onto complex surfaces such as an inter-reflecting statuette, glossy wallpaper, or through highly-refractive glass. Furthermore, we illustrate that a side-effect of our approach is an increase in the overall sharpness of defocused projections. KW - Association for Computing Machinery / Special Interest Group on Graphics KW - CGI KW - Maschinelles Sehen Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7625 ER - TY - CHAP A1 - Brackx, Fred A1 - De Knock, B. A1 - De Schepper, Hennie ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - A MULTI--DIMENSIONAL HILBERT TRANSFORM IN ANISOTROPIC CLIFFORD ANALYSIS N2 - In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29297 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian A1 - Macke, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - A NATURAL NEIGHBOR BASED MOVING LEAST SQUARES APPROACH WITH INTERPOLATING WEIGHTING FUNCTION N2 - The Element-free Galerkin Method has become a very popular tool for the simulation of mechanical problems with moving boundaries. The internally applied Moving Least Squares approximation uses in general Gaussian or cubic weighting functions and has compact support. Due to the approximative character of this method the obtained shape functions do not fulfill the interpolation condition, which causes additional numerical effort for the imposition of the essential boundary conditions. The application of a singular weighting function, which leads to singular coefficient matrices at the nodes, can solve this problem, but requires a very careful placement of the integration points. Special procedures for the handling of such singular matrices were proposed in literature, which require additional numerical effort. In this paper a non-singular weighting function is presented, which leads to an exact fulfillment of the interpolation condition. This weighting function leads to regular values of the weights and the coefficient matrices in the whole interpolation domain even at the nodes. Furthermore this function gives much more stable results for varying size of the influence radius and for strongly distorted nodal arrangements than classical weighting function types. Nevertheless, for practical applications the results are similar as these obtained with the regularized weighting type presented by the authors in previous publications. Finally a new concept will be presented, which enables an efficient analysis of systems with strongly varying node density. In this concept the nodal influence domains are adapted depending on the nodal configuration by interpolating the influence radius for each direction from the distances to the natural neighbor nodes. This approach requires a Voronoi diagram of the domain, which is available in this study since Delaunay triangles are used as integration background cells. In the numerical examples it will be shown, that this method leads to a more uniform and reduced number of influencing nodes for systems with varying node density than the classical circular influence domains, which means that the small additional numerical effort for interpolating the influence radius leads to remarkable reduction of the total numerical cost in a linear analysis while obtaining similar results. For nonlinear calculations this advantage would be even more significant. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29943 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Pham, Hoang Anh ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE EXCITATION FOR SELECTIVE SENSITIVITY-BASED STRUCTURAL IDENTIFICATION N2 - Major problems of applying selective sensitivity to system identification are requirement of precise knowledge about the system parameters and realization of the required system of forces. This work presents a procedure which is able to deriving selectively sensitive excitation by iterative experiments. The first step is to determine the selectively sensitive displacement and selectively sensitive force patterns. These values are obtained by introducing the prior information of system parameters into an optimization which minimizes the sensitivities of the structure response with respect to the unselected parameters while keeping the sensitivities with respect to the selected parameters as a constant. In a second step the force pattern is used to derive dynamic loads on the tested structure and measurements are carried out. An automatic control ensures the required excitation forces. In a third step, measured outputs are employed to update the prior information. The strategy is to minimize the difference between a predicted displacement response, formulated as function of the unknown parameters and the measured displacements, and the selectively sensitive displacement calculated in the first step. With the updated values of the parameters a re-analysis of selective sensitivity is performed and the experiment is repeated until the displacement response of the model and the actual structure are conformed. As an illustration a simply supported beam made of steel, vibrated by harmonic excitation is investigated, thereby demonstrating that the adaptive excitation can be obtained efficiently. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30015 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE RESPONSE SURFACE APPROACH USING ARTIFICIAL NEURAL NETWORKS AND MOVING LEAST SQUARES N2 - In engineering science the modeling and numerical analysis of complex systems and relations plays an important role. In order to realize such an investigation, for example a stochastic analysis, in a reasonable computational time, approximation procedure have been developed. A very famous approach is the response surface method, where the relation between input and output quantities is represented for example by global polynomials or local interpolation schemes as Moving Least Squares (MLS). In recent years artificial neural networks (ANN) have been applied as well for such purposes. Recently an adaptive response surface approach for reliability analyses was proposed, which is very efficient concerning the number of expensive limit state function evaluations. Due to the applied simplex interpolation the procedure is limited to small dimensions. In this paper this approach is extended for larger dimensions using combined ANN and MLS response surfaces for evaluating the adaptation criterion with only one set of joined limit state points. As adaptation criterion a combination by using the maximum difference in the conditional probabilities of failure and the maximum difference in the approximated radii is applied. Compared to response surfaces on directional samples or to plain directional sampling the failure probability can be estimated with a much smaller number of limit state points. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29922 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Eckardt, Stefan A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE SIMULATION OF THE DAMAGE BEHAVIOR OF CONCRETE USING HETEROGENEOUS MULTISCALE MODELS N2 - In this paper an adaptive heterogeneous multiscale model, which couples two substructures with different length scales into one numerical model is introduced for the simulation of damage in concrete. In the presented approach the initiation, propagation and coalescence of microcracks is simulated using a mesoscale model, which explicitly represents the heterogeneous material structure of concrete. The mesoscale model is restricted to the damaged parts of the structure, whereas the undamaged regions are simulated on the macroscale. As a result an adaptive enlargement of the mesoscale model during the simulation is necessary. In the first part of the paper the generation of the heterogeneous mesoscopic structure of concrete, the finite element discretization of the mesoscale model, the applied isotropic damage model and the cohesive zone model are briefly introduced. Furthermore the mesoscale simulation of a uniaxial tension test of a concrete prism is presented and own obtained numerical results are compared to experimental results. The second part is focused on the adaptive heterogeneous multiscale approach. Indicators for the model adaptation and for the coupling between the different numerical models will be introduced. The transfer from the macroscale to the mesoscale and the adaptive enlargement of the mesoscale substructure will be presented in detail. A nonlinear simulation of a realistic structure using an adaptive heterogeneous multiscale model is presented at the end of the paper to show the applicability of the proposed approach to large-scale structures. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29478 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Wall, Wolfgang A. A1 - Förster, Christiane A1 - Neumann, Malte A1 - Ramm, Ekkehard ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADVANCES IN FLUID-STRUCTURE INTERACTION N2 - For the dynamic behavior of lightweight structures like thin shells and membranes exposed to fluid flow the interaction between the two fields is often essential. Computational fluid-structure interaction provides a tool to predict this interaction and complement or eventually replace expensive experiments. Partitioned analyses techniques enjoy great popularity for the numerical simulation of these interactions. This is due to their computational superiority over simultaneous, i.e. fully coupled monolithic approaches, as they allow the independent use of suitable discretization methods and modular analysis software. We use, for the fluid, GLS stabilized finite elements on a moving domain based on the incompressible instationary Navier-Stokes equations, where the formulation guarantees geometric conservation on the deforming domain. The structure is discretized by nonlinear, three-dimensional shell elements. Commonly used sequential staggered coupling schemes may exhibit instabilities due to the so-called artificial added mass effect. As best remedy to this problem subiterations should be invoked to guarantee kinematic and dynamic continuity across the fluid-structure interface. Since iterative coupling algorithms are computationally very costly, their convergence rate is very decisive for their usability. To ensure and accelerate the convergence of this iteration the updates of the interface position are relaxed. The time dependent, 'optimal' relaxation parameter is determined automatically without any user-input via exploiting a gradient method or applying an Aitken iteration scheme. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29161 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Zang, Di A1 - Sommer, G. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION N2 - We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30396 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Scherer, Klaus A1 - Grinewitschus, Viktor ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ FÜR FACILITY MANAGEMENT UND ANWENDUNG N2 - Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsfähigkeit in kleinsten Formaten, mit geringsten Energien und zu günstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Geräten und Systemen ist nunmehr zur Selbstverständlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir nähern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der überall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen täglichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die größeren Computerkomponenten (z.B. PCs, Server) über Datenschnittstellen zu räumlich verteilten Netzwerken verknüpft (z.B. Internet, Intranet) und mit einer systemübergreifenden und adäquaten Intelligenz (Software) programmiert, so können neuartige Funktionalitäten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Gebäuden und Räumen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Gebäudephysik, technischer Gebäudeausrüstung (TGA) und Gebäudeautomation (GA) im Wege stehende Gewerketrennung zu überwinden. Es entstehen für div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erläuterte Beispiele für AmI-Lösungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notfällen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im Büro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Gebäuden. Im Duisburger inHaus-Innovationszentrum für Intelligente Raum- und Gebäudesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste Lösungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen Möglichkeiten für den Transfer dieser neuen Technologie in den Raum- und Gebäudebereich. Es folgt eine abschließende Zusammenfaßung und eine Einschätzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29140 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Eckardt, Stefan A1 - Schrader, Kai A1 - Deckner, T. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AN IMPROVED COHESIVE CRACK MODEL FOR COMBINED CRACK OPENING AND SLIDING UNDER CYCLIC LOADING N2 - The modeling of crack propagation in plain and reinforced concrete structures is still a field for many researchers. If a macroscopic description of the cohesive cracking process of concrete is applied, generally the Fictitious Crack Model is utilized, where a force transmission over micro cracks is assumed. In the most applications of this concept the cohesive model represents the relation between the normal crack opening and the normal stress, which is mostly defined as an exponential softening function, independently from the shear stresses in tangential direction. The cohesive forces are then calculated only from the normal stresses. By Carol et al. 1997 an improved model was developed using a coupled relation between the normal and shear damage based on an elasto-plastic constitutive formulation. This model is based on a hyperbolic yield surface depending on the normal and the shear stresses and on the tensile and shear strength. This model also represents the effect of shear traction induced crack opening. Due to the elasto-plastic formulation, where the inelastic crack opening is represented by plastic strains, this model is limited for applications with monotonic loading. In order to enable the application for cases with un- and reloading the existing model is extended in this study using a combined plastic-damage formulation, which enables the modeling of crack opening and crack closure. Furthermore the corresponding algorithmic implementation using a return mapping approach is presented and the model is verified by means of several numerical examples. Finally an investigation concerning the identification of the model parameters by means of neural networks is presented. In this analysis an inverse approximation of the model parameters is performed by using a given set of points of the load displacement curves as input values and the model parameters as output terms. It will be shown, that the elasto-plastic model parameters could be identified well with this approach, but require a huge number of simulations. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29933 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Martin, Karlheinz T1 - Analyse der baubetrieblichen Logik und Grundlagen zur 3-D-Simulation eines U-Bahnhofs N2 - Am beispiel der sich im Bau befindlichen U-Bahnstation 'Vijzelgracht' in Amsterdam werden beispielhaft Ablaufkonzepte untersucht und und durch Analyse ihrer Logik geprüft. Der Schwerpunkt der Untersuchung liegt in der Entwicklung von möglichen Konzepten der Kombination von Erdaushub mit der Montage von aussteifenden Elementen. Dazu werden die wesentlichen, relevanten Arbeitsschritte identifiziert und beschrieben. Auf der Basis von Aufwandswerten werden Maschinen und Geräte dimensioniert. Die Mengenermittlung des Erdstoffvolumens ist hierbei ebenso Grundlage für die Erarbeitung von Ablaufkonzepten. Auf diesen Grundlagen werden mehrere Ablaufkonzepte dargestellt. Der Nachweis der logischen Wahrheit erfolgt am Beispiel einer Ablaufvariante. Hier werden die in logische Sprache überführten Arbeitsschritte dargestellt und auf Wahrheit hin geprüft. KW - Bauablauf KW - Aussagenlogik Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7855 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Wolny, Petra T1 - Analyse der Trag- und Funktionsfähigkeit von Lagern und Pfeilern bei unterschiedlichen Sicherheitskonzepten N2 - Bemessung der Lager und Pfeiler einer fünffeldrigen zweistegigen vorgespannten Plattenbalkenbrücke in Massivbauweise; Analyse der Einwirkungen, der Kräfte und Bewegungen in den Lagerungspunkten sowie der Lager und Pfeiler; KW - Analyse KW - Massivbrücke KW - Elastomerlager KW - Pfeiler KW - Kräfte und Bewegungen KW - unterschiedliche Sicherheitskonzepte Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7516 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - CHAP A1 - Woszczyna, Anna A1 - Kaminski, Mieczysław A1 - Maj, Marek A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYSING THE INFLUENCE OF THE REINFORCED CONCRETE CHIMNEY GEOMETRY CHANGES ON THE STRESSES IN THE CHIMNEY SHAFT N2 - Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30388 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Ryan, John A1 - Kraußhar, Rolf Sören ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYSIS OF DIRAC OPERATORS ON SOME CONFORMALLY FLAT MANIFOLDS N2 - In this paper we shall review the role of Dirac operators arising in Clifford analysis over some examples of conformally flat manifolds. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30081 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Knyziak, Piotr ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS N2 - This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29792 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Krasnov, Yakov ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES N2 - Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29822 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - König, Markus A1 - Lang, H. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANWENDUNG DES CASE-BASED REASONING BEI DER ERMITTLUNG VON VARIANTEN FüR DEN OBERBAU VON VERKEHRSFLÄCHEN N2 - Für die Ausführung des Oberbaus von Verkehrsflächen existiert in Abhängigkeit von projektspezifischen Voraussetzungen eine Vielzahl von verschiedenen Varianten. Aufgrund von Erfahrungen der Projektplaner werden bei ähnlichen Voraussetzungen häufig gleichartige Ausführungsvarianten gewählt. Um eine mögliche Lösungsvariante für den Straßenoberbau zu erhalten, sollten daher nicht nur die gesetzlichen Richtlinien sondern auch bereits beendete Projekte berücksichtigt werden. Im Rahmen eines Wissenschaftlichen Kollegs an der Bauhaus-Universität Weimar wurde die Anwendung des Case-Based Reasoning für die Auswahl von Ausführungsvarianten für den Straßenoberbau untersucht. In diesem Beitrag werden die grundlegenden Konzepte des Case-Based Reasoning und die Bestimmung von ähnlichen Varianten anhand einfacher Beispiele aus dem Straßenoberbau dargestellt. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29808 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Misyura, E. A1 - Volkova, Viktorija ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE N2 - The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30313 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kraußhar, Rolf Sören A1 - Constales, Denis A1 - Gürlebeck, Klaus A1 - Sprößig, Wolfgang ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPLICATIONS OF QUATERNIONIC ANALYSIS IN ENGINEERING N2 - The quaternionic operator calculus can be applied very elegantly to solve many important boundary value problems arising in fluid dynamics and electrodynamics in an analytic way. In order to set up fully explicit solutions. In order to apply the quaternionic operator calculus to solve these types of boundary value problems fully explicitly, one has to evaluate two types of integral operators: the Teodorescu operator and the quaternionic Bergman projector. While the integral kernel of the Teodorescu transform is universal for all domains, the kernel function of the Bergman projector, called the Bergman kernel, depends on the geometry of the domain. Recently the theory of quaternionic holomorphic multiperiodic functions and automorphic forms provided new impulses to set up explicit representation formulas for large classes of hyperbolic polyhedron type domains. These include block shaped domains, wedge shaped domains (with or without additional rectangular restrictions) and circular symmetric finite and infinite cylinders as particular subcases. In this talk we want to give an overview over the recent developments in this direction. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29128 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Volkova, Viktorija ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPLICTION OF THE PHASE TRAJECTORIES MAPPING TO IDENTIFICATION N2 - The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration – displacement". Unlike the trajectories mapping in a plane "velocity – displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30329 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Gruber, Peter A1 - Valdman, J. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPROXIMATE SOLUTION OF ELASTOPLASTIC PROBLEMS BASED ON THE MOREAU-YOSIDA THEOREM N2 - We propose a new approach to the numerical solution of quasi-static elastic-plastic problems based on the Moreau-Yosida theorem. After the time discretization, the problem is expressed as an energy minimization problem for unknown displacement and plastic strain fields. The dependency of the minimization functional on the displacement is smooth whereas the dependency on the plastic strain is non-smooth. Besides, there exists an explicit formula, how to calculate the plastic strain from a given displacement field. This allows us to reformulate the original problem as a minimization problem in the displacement only. Using the Moreau-Yosida theorem from the convex analysis, the minimization functional in the displacements turns out to be Frechet-differentiable, although the hidden dependency on the plastic strain is non-differentiable. The seconds derivative exists everywhere apart from the elastic-plastic interface dividing elastic and plastic zones of the continuum. This motivates to implement a Newton-like method, which converges super-linearly as can be observed in our numerical experiments. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29602 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Nönnig, Jörg Rainer T1 - ARCHITEKTUR, SPRACHE, KOMPLEXITÄT : Acht Essays zur Architekturepistemologie T1 - ARCHITECTURE, LANGUAGE, COMPLEXITY : Eight Essays on Architectural Epistemology N2 - Komplexität ist ein genuin architektonisches Problem. Der Begriff von Architektur als einer universellen Praxis bzw. ganzheitlichen Erkenntnisweise enthält bereits im Kern den Begriff 'Komplexität'. Beide Konzepte fallen weithin zusammen – Architektur kann damit als spezifische Denkform des Komplexen betrachtet werden. Das in der Arbeit aufgezeigte Dilemma besteht darin, dass der modernen Architektur ihr ursprünglicher Gestaltungsgegenstand – Komplexität – abhanden gekommen ist: 'Nönnig dekonstruiert zu Recht die hoch aggregierten Begriffe des Raumes und des Entwurfs. Die gesamte Arbeit zeigt, dass die modernen Beschreibungsformen von Komplexität gerade nicht in der Architektur entwickelt sind.' (Prof. Gerd Zimmermann, Weimar). Um dieses Defizit zu beheben und Architektur als eigenständige Wissenstechnik ('Technoepisteme') zu etablieren, wird ausgehend von spezifischen 'Praxis- und Diskursdefiziten' ein Theorieszenario entwickelt, mit dem und in dem Architektur sich als komplexe Wissensform verwirklicht (u.a. Komplexe Systeme, Design Sciences, Operationale Heuristik). 'Vorliegende Arbeit ist der Versuch […] die Architektur gewissermaßen wieder in den Stand zu setzen, der ihr im System des Denkens eigentlich zukommt […] Der Komplexitätsdiskurs in der Architektur ist zurück.' (Prof. Gerd Zimmermann, Weimar) N2 - 'In his study ARCHITECTURE, LANGUAGE, AND COMPLEXITY, Jörg Rainer Noennig observes that architectural thought is hampered by the inadequacy of traditional architectural concepts [...] To grasp the complex issues of today, we are in dire need of 'languaging' to come up with better tools. [...] The present study represents the first step in the direction of creating a New Organon that will conceptualize the world in terms of processes rather than things.' (Prof. Kari Jormakka, Wien) KW - Erkenntnistheorie KW - Wissenschaftsphilosophie KW - Kognitive Komplexität KW - Architekturtheorie KW - Systemtheorie KW - Heuristik KW - Komplexität KW - Architectural Theory KW - Design Science KW - Complex Systems KW - Epistemology KW - Cognition Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20071023-9946 ER - TY - CHAP A1 - Wittenberg, Reinhold ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AUFBAU EINES MANAGEMENT-INFORMATIONS-SYSTEMS (M-I-S) UND BAUSTELLEN-CONTROLLINGS N2 - Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gründe hierfür sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings frühzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation ständig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete möglich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende ermöglicht, dass gravierende Veränderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management frühzeitig (im Sinne eines Frühwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelmäßig geprüft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren überprüft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht vergütet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verfügung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30356 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Richter, Katharina A1 - Donath, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AUGMENTING DESIGNERS MEMORY - REVISAL OF THE CASE-BASED REASONING PARADIGM IN ARCHITECTURAL EDUCATION AND DESIGN N2 - This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30047 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Lourens, Eliz-Mari A1 - van Rooyen, G.C. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - Automating Preliminary Column Force Calculations In Multy-Storey Buildings N2 - In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29864 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Wender, K. A1 - Willenbacher, Heiko A1 - Hübler, Reinhard ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - BENUTZERADÄQUATE NAVIGATIONS- UND RECHERCHETECHNOLOGIEN FÜR VERTEILTE DYNAMISCHE DIGITALE BAUWERKSMODELLE N2 - Hinsichtlich der Integration einzelner Bauwerkslebensphasen und der verschiedenen Beteiligten, insbesondere innerhalb von Bauplanungs- und Revitalisierungsprozessen, bestehen aktuell entscheidende Defizite. Die generelle Zielstellung der in diesem Beitrag vorgestellten Forschungsarbeiten besteht in der Unterstützung und Verbesserung der Integration durch die disziplin- und lebensphasenübergreifende Bereitstellung sämtlicher bauwerksbezogener Informationen. Dies erfordert einerseits geeignete Ansätze zur Modellierung und Integration der vielfältigen disziplinspezifischen Daten, andererseits geeignete Lösungen, die einen globalen Zugriff, Navigation und Recherche im Gesamtdatenbestand ermöglichen. Die Modellierung und Verwaltung bauwerksbezogener Daten ist seit längerem Gegenstand diverser Forschungsarbeiten. Im Rahmen des SFB 524 wurde ein eigener Ansatz basierend auf einem laufzeitdynamischen Partialmodellverbund entwickelt. Dieser wird in den wesentlichen Grundzügen anderen Ansätzen gegenübergestellt. Den Schwerpunkt dieses Beitrags bildet jedoch die Entwicklung einer geeigneten flexiblen Navigations- und Rechercheschicht zu Realisierung projektglobaler Informationsrecherche. Aus der Sicht der Modellierung und Datenverwaltung wie auch aus der Sicht der Informationsrecherche und Informationspräsentation in Planungsprozessen ergeben sich verschiedene Anforderungen an derartige Recherchewerkzeuge, wobei der wesentlichste Grundsatz maximale Flexibilität hinsichtlich verfügbarer Darstellungstechniken und deren freie Kombination mit Techniken formaler Suchanfragen ist. Das entwickelte Systemkonzept basiert auf einem Framework, welches verschiedene Grundtypen von Recherchemodulen und deren Interaktionsprinzipien vorgibt. Einzelne Recherchemodule werden als Ausprägungen dieser Modultypen realisiert und können je nach Bedarf laufzeitdynamisch in die Navigationsschicht integriert werden. Die technische Realisierung des Systems erfolgt im Umfeld vorhandener Prototypen aus vorangegangenen Forschungsaktivitäten. Dieses technische Umfeld gibt verschiedene Rahmenbedingungen vor, welche im Vorfeld prototypischer Implementierungen verschiedene Adaptionen des generellen Systemkonzepts notwendig machen. Der vorliegende Beitrag stellt den aktuellen Entwicklungsstand der Systemlösung aus konzeptioneller und technischer Sicht sowie erste prototypische Realisierungen von Recherchemodulen vor. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30349 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - König, Markus A1 - Tauscher, Eike ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - BERECHNUNG VON BAUABLÄUFEN MIT VERSCHIEDENEN AUSFÜHRUNGSVARIANTEN N2 - Prozesse im Bauingenieurwesen sind komplex und beinhalten eine große Anzahl verschiedener Aufgaben mit vielen logischen Abhängigkeiten. Basierend auf diesen projektspezifischen Abhängigkeiten wird gewöhnlich ein Bauablaufplan manuell erstellt. In der Regel existieren mehrere Varianten und somit alternative Bauabläufe um ein Projekt zu realisieren. Welche dieser Ausführungsvarianten zur praktischen Anwendung kommt, wird durch den jeweiligen Projektmanager bestimmt. Falls Ä;nderungen oder Störungen während des Bauablaufs auftreten, müssen die davon betroffenen Aufgaben und Abläufe per Hand modifiziert und alternative Aufgaben sowie Abläufe stattdessen ausgeführt werden. Diese Vorgehensweise ist oft sehr aufwändig und teuer. Aktuelle Forschungsansätze beschäftigen sich mit der automatischen Generierung von Bauabläufen. Grundlage sind dabei Aufgaben mit ihren erforderlichen Voraussetzungen und erzeugten Ergebnissen. Im Rahmen dieses Beitrags wird eine Methodik vorgestellt, um Bauabläufe mit Ausführungsvarianten in Form von Workflow-Netzen zu jeder Zeit berechnen zu können. Die vorgestellte Methode wird anhand eines Beispiels aus dem Straßenbau schematisch dargestellt. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29816 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Cacao, Isabel A1 - Constales, Denis A1 - Kraußhar, Rolf Sören ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - BESSEL FUNCTIONS AND HIGHER DIMENSIONAL DIRAC TYPE EQUATIONS N2 - In this paper we study the structure of the solutions to higher dimensional Dirac type equations generalizing the known λ-hyperholomorphic functions, where λ is a complex parameter. The structure of the solutions to the system of partial differential equations (D- λ) f=0 show a close connection with Bessel functions of first kind with complex argument. The more general system of partial differential equations that is considered in this paper combines Dirac and Euler operators and emphasizes the role of the Bessel functions. However, contrary to the simplest case, one gets now Bessel functions of any arbitrary complex order. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29366 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Seidel, Tilman A1 - Gasser, Ingenuin A1 - Werner, Bodo ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY N2 - Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30187 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Brackx, Fred A1 - De Schepper, Nele A1 - Sommen, Frank ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - Clifford-Hermite and Two-Dimensional Clifford-Gabor Filters For Early Vision N2 - Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29303 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - RPRT A1 - Gross, Tom A1 - Marquardt, Nicolai T1 - CollaborationBus: An Editor for the Easy Configuration of Complex Ubiquitous Environment N2 - Early sensor-based infrastructures were often developed by experts with a thorough knowledge of base technology for sensing information, for processing the captured data, and for adapting the system’s behaviour accordingly. In this paper we argue that also end-users should be able to configure Ubiquitous Computing environments. We introduce the CollaborationBus application: a graphical editor that provides abstractions from base technology and thereby allows multifarious users to configure Ubiquitous Computing environments. By composing pipelines users can easily specify the information flows from selected sensors via optional filters for processing the sensor data to actuators changing the system behaviour according to the users’ wishes. Users can compose pipelines for both home and work environments. An integrated sharing mechanism allows them to share their own compositions, and to reuse and build upon others’ compositions. Real-time visualisations help them understand how the information flows through their pipelines. In this paper we present the concept, implementation, and early user feedback of the CollaborationBus application. KW - Angewandte Informatik KW - Ubiquitous Computing KW - Editor KW - Konfiguration KW - Ubiquitous Computing KW - editor KW - configuration Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7463 ER - TY - CHAP A1 - Dogan, Sevgi Zeynep A1 - Arditi, D. A1 - Gunaydin, H. Murat ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPARISON OF ANN AND CBR MODELS FOR EARLY COST PREDICTION OF STRUCTURAL SYSTEMS N2 - Reasonably accurate cost estimation of the structural system is quite desirable at the early stages of the design process of a construction project. However, the numerous interactions among the many cost-variables make the prediction difficult. Artificial neural networks (ANN) and case-based reasoning (CBR) are reported to overcome this difficulty. This paper presents a comparison of CBR and ANN augmented by genetic algorithms (GA) conducted by using spreadsheet simulations. GA was used to determine the optimum weights for the ANN and CBR models. The cost data of twenty-nine actual cases of residential building projects were used as an example application. Two different sets of cases were randomly selected from the data set for training and testing purposes. Prediction rates of 84% in the GA/CBR study and 89% in the GA/ANN study were obtained. The advantages and disadvantages of the two approaches are discussed in the light of the experiments and the findings. It appears that GA/ANN is a more suitable model for this example of cost estimation where the prediction of numerical values is required and only a limited number of cases exist. The integration of GA into CBR and ANN in a spreadsheet format is likely to improve the prediction rates. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29421 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Szolomicki, Jerzy Pawel A1 - Baranski, Jacek ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES N2 - In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30265 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Bauriedel, Christian A1 - Donath, Dirk A1 - König, Reinhard ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPUTER-SUPPORTED SIMULATIONS FOR URBAN PLANNING N2 - The idea about a simulation program to support urban planning is explained: Four different, clearly defined developing paths can be calculated for the rebuilding of a shrinking town. Aided by self-organization principles, a complex system can be created. The dynamics based on the action patterns of single actors, whose behaviour is cyclically depends on the generated structure. Global influences, which control the development, can be divided at a spatial, socioeconomic, and organizational-juridical level. The simulation model should offer conclusions on new planning strategies, especially in the context of the creation process of rebuilding measures. An example of a transportation system is shown by means of prototypes for the visualisation of the dynamic development process. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29235 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Braunes, Jörg A1 - Donath, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPUTERGESTÜTZTE PLANUNG IM BESTAND VON DER DIGITALEN BESTANDSERFASSUNG ZUR PLANUNGSUNTERSTÜTZUNG IM CAAD N2 - Für eine gesicherte Planung im Bestand, sind eine Fülle verschiedenster Informationen zu berücksichtigen, welche oft erst während des Planungs- oder Bauprozesses gewonnen werden. Voraussetzung hierfür bildet immer eine Bestandserfassung. Zwar existieren Computerprogramme zur Unterstützung der Bestandserfassung, allerdings handelt es sich hierbei ausschließlich um Insellösungen. Der Export der aufgenommenen Daten in ein Planungssystem bedingt Informationsverluste. Trotz der potentiellen Möglichkeit aktueller CAAD/BIM Systeme zur Verwaltung von Bestandsdaten, sind diese vorrangig für die Neubauplanung konzipiert. Die durchgängige Bearbeitung von Sanierungsprojekten von der Erfassung des Bestandes über die Entwurfs- und Genehmigungsplanung bis zur Ausführungsplanung innerhalb eines CAAD/BIM Systems wird derzeit nicht adäquat unterstützt. An der Professur Informatik in der Architektur (InfAR) der Fakultät Architektur der Bauhaus-Universität Weimar entstanden im Rahmen des DFG Sonderforschungsbereich 524 "Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken" in den letzten Jahren Konzepte und Prototypen zur fachlich orientierten Unterstützung der Planung im Bestand. Der Fokus lag dabei in der Erfassung aller planungsrelevanter Bestandsdaten und der Abbildung dieser in einem dynamischen Bauwerksmodell. Aufbauend auf diesen Forschungsarbeiten befasst sich der Artikel mit der kontextbezogenen Weiterverwendung und gezielten Bereitstellung von Bestandsdaten im Prozess des Planens im Bestand und der Integration von Konzepten der planungsrelevanten Bestandserfassung in marktübliche CAAD/BIM Systeme. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29338 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schönberger, Karsten A1 - Hermann, F. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPUTERGESTÜTZTES PORTFOLIOMANAGEMENT – EIN PRAXISBEISPIEL N2 - Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das größte Wohnungsunternehmen in Thüringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerstände und unterschiedliche Modernisierungsmaßnahmen und -stände unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivität, die Standortqualität und die Objektwirtschaftlichkeit fällt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. Über die Schritte der technischen Bestandserfassung, die Einwertung über ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugehöriger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-jährigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30168 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schiller, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CONSTRAINED TRAFFIC DEMAND MODELS - SIMULTANEOUS DISTRIBUTION AND MODE CHOICE N2 - Unconstrained models are very often found in the broad spectrum of different theories of traffic demand models. In these models there are none or only one-sided restrictions influencing the choice of the individual. However in the traffic demand different deciding dependencies of the traffic volume with regard to the specific conditions of the territory structure potentials exist. Kichhoff and Lohse introduced bi- and tri-linearly constrained models to show these dependencies. In principle, the dependencies are described as hard, elastic and open boundary sum criteria. In this article a model is formulated which gets away from these predefined boundary sum criteria and allows a free determination of minimal and maximal boundary sum criteria. The iterative solution algorithm is shown according to a FURNESS procedure at the same time. With the approach of freely selectable minimal and maximal boundary sum criteria the modeling transport planner gets the possibility to show the traffic event even better. Furthermore all common boundary sum criteria can be calculated with this model. Therewith the often necessary and sensible standard and special cases can also be modeled. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30148 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Beran, Václav A1 - Dlask, Petr ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CONSTRUCTION SPEED AND CASH FLOW OPTIMISATION N2 - Practical examples show that the improvement in cost flow and total amount of money spend in construction and further use may be cut significantly. The calculation is based on spreadsheets calculation, very easy to develop on most PC´s now a days. Construction works, are a field where the evaluation of Cash Flow can be and should be applied. Decisions about cash flow in construction are decisions with long-term impact and long-term memory. Mistakes from the distant past have a massive impact on situations in the present and into the far economic future of economic activities. Two approaches exist. The Just-in-Time (JIT) approach and life cycle costs (LCC) approach. The calculation example shows the dynamic results for the production speed in opposition to stable flow of production in duration of activities. More sophisticated rescheduling in optimal solution might bring in return extra profit. In the technologies and organizational processes for industrial buildings, railways and road reconstruction, public utilities and housing developments there are assembly procedures that are very appropriate for the given purpose, complicated research-, development-, innovation-projects are all very good aspects of these kinds of applications. The investors of large investments and all public invested money may be spent more efficiently if an optimisation speed-strategy can be calculated. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29269 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kasparek, Eva ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CONVERGENCE OF A NEW CONSISTENT FOLDED PLATE THEORY N2 - The design of challenging space structures frequently relies on the theory of folded plates. The models are composed of plane facets of which the bending and membrane stiffness are coupled along the folds. In conventional finite element analysis of faceted structures the continuity of the displacement field is enforced exclusively at the nodes. Since approximate solutions for transverse and for in-plane displacements are not members of the same function space, separation occurs in between the common nodes of adjacent elements. It is shown that the kinematic assumptions of Bernoulli are accounted for this incompatibility along the edges in facet models. A general answer to this problem involves substantial modification of plate and membrane theory, but a straight forward formulation can be derived for simply folded plates, structures, whose folds do not intersect. A broad class of faceted structures, including models of various curved shells, belong to this category and can be calculated consistently. The additional requirements to assure continuity concern the mapping of displacement derivatives on the edges. An appropriate finite facet element provides node and edge-oriented degrees of freedom, whose transformation to system degrees of freedom, depends on the geometric configuration at each node. The concept is implemented using conform triangular elements. To evaluate the new approach, the energy norm of representative structures for refined meshes is calculated. The focus is placed on the mathematical convergence towards reliable solutions obtained from finite volume models. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29724 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Häfner, Stefan A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - DAMAGE SIMULATION OF HETEROGENEOUS SOLIDS BY NONLOCAL FORMULATIONS ON ORTHOGONAL GRIDS N2 - The present paper is part of a comprehensive approach of grid-based modelling. This approach includes geometrical modelling by pixel or voxel models, advanced multiphase B-spline finite elements of variable order and fast iterative solver methods based on the multigrid method. So far, we have only presented these grid-based methods in connection with linear elastic analysis of heterogeneous materials. Damage simulation demands further considerations. The direct stress solution of standard bilinear finite elements is severly defective, especially along material interfaces. Besides achieving objective constitutive modelling, various nonlocal formulations are applied to improve the stress solution. Such a corrective data processing can either refer to input data in terms of Young's modulus or to the attained finite element stress solution, as well as to a combination of both. A damage-controlled sequentially linear analysis is applied in connection with an isotropic damage law. Essentially by a high resolution of the heterogeneous solid, local isotropic damage on the material subscale allows to simulate complex damage topologies such as cracks. Therefore anisotropic degradation of a material sample can be simulated. Based on an effectively secantial global stiffness the analysis is numerically stable. The iteration step size is controlled for an adequate simulation of the damage path. This requires many steps, but in the iterative solution process each new step starts with the solution of the prior step. Therefore this method is quite effective. The present paper provides an introduction of the proposed concept for a stable simulation of damage in heterogeneous solids. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29638 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Bubner, André T1 - Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnhäusern in Stahlbauweise T1 - Data Models for Processing of Engineering Tasks at the Example of Residential Buildings in Steel Construction Method N2 - Modelle bilden die Grundlage der Planung. Sie repräsentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenhänge bezüglich der darin abgebildeten Aspekte. Diese Abhängigkeiten werden in der praktischen Planungsbearbeitung gegenwärtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen berücksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften führt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Ansprüchen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine über den Zweck der Bereitstellung ausgewählter Informationen zum Bauwerk und der Unterstützung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnhäusern in Stahlbauweise geführt. N2 - Models form the basis of the planning. They represent the characteristics necessary for the processing of a building in a form suited to the specific task. Between the different models, which are used for the representation of the building, there exist engineer-technical interrelations with regard to the illustrated aspects. At present these dependences are taken into consideration in the practical planning on basis of empirical values, normative guidelines and simplifying assumptions. The more detailed modelling of the building characteristics leads to a more defined linkage of the different models. To avoid an engineering island formation, there is an accordingly adapted representation of the relations existing between the single models necessary. With the rising demands on the processing of engineering tasks a data-technical representation wins in importance which realises more than a supply of selected information about the building and the support of a data exchange between different planners. This requires a discussion of the requirements for such a description from an engineer-technical view. The investigation of these technical requirements is carried out by the example of residential buildings in steel construction method. KW - Modellierung KW - Stahlbau KW - Wohnungsbau KW - Datenmodell KW - Modellbildung KW - Wohnhäuser in Stahlbauweise KW - fachliche Integration KW - Bearbeitung von Ingenieuraufgaben KW - modelling KW - residential buildings KW - engineer-technical integration KW - processing of engineering tasks Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070423-8580 ER - TY - CHAP A1 - Helbing, D. A1 - Kesting, A. A1 - Treiber, M. A1 - Lämmer, S. A1 - Schönhof, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - DECENTRALIZED APPROACHES TO ADAPTIVE TRAFFIC CONTROL AND AN EXTENDED LEVEL OF SERVICE CONCEPT N2 - Traffic systems are highly complex multi-component systems suffering from instabilities and non-linear dynamics, including chaos. This is caused by the non-linearity of interactions, delays, and fluctuations, which can trigger phenomena such as stop-and-go waves, noise-induced breakdowns, or slower-is-faster effects. The recently upcoming information and communication technologies (ICT) promise new solutions leading from the classical, centralized control to decentralized approaches in the sense of collective (swarm) intelligence and ad hoc networks. An interesting application field is adaptive, self-organized traffic control in urban road networks. We present control principles that allow one to reach a self-organized synchronization of traffic lights. Furthermore, vehicles will become automatic traffic state detection, data management, and communication centers when forming ad hoc networks through inter-vehicle communication (IVC). We discuss the mechanisms and the efficiency of message propagation on freeways by short-range communication. Our main focus is on future adaptive cruise control systems (ACC), which will not only increase the comfort and safety of car passengers, but also enhance the stability of traffic flows and the capacity of the road (“traffic assistance”). We present an automated driving strategy that adapts the operation mode of an ACC system to the autonomously detected, local traffic situation. The impact on the traffic dynamics is investigated by means of a multi-lane microscopic traffic simulation. The simulation scenarios illustrate the efficiency of the proposed driving strategy. Already an ACC equipment level of 10% improves the traffic flow quality and reduces the travel times for the drivers drastically due to delaying or preventing a breakdown of the traffic flow. For the evaluation of the resulting traffic quality, we have recently developed an extended level of service concept (ELOS). We demonstrate our concept on the basis of travel times as the most important variable for a user-oriented quality of service. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29107 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Der Bauvertrag sagt dazu leider nichts! - Was tun? KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8498 ER -