TY - CHAP A1 - Unger, Jörg F. A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - DISCRETE CRACK SIMULATION OF CONCRETE USING THE EXTENDED FINITE ELEMENTMETHOD N2 - The extended finite element method (XFEM) offers an elegant tool to model material discontinuities and cracks within a regular mesh, so that the element edges do not necessarily coincide with the discontinuities. This allows the modeling of propagating cracks without the requirement to adapt the mesh incrementally. Using a regular mesh offers the advantage, that simple refinement strategies based on the quadtree data structure can be used to refine the mesh in regions, that require a high mesh density. An additional benefit of the XFEM is, that the transmission of cohesive forces through a crack can be modeled in a straightforward way without introducing additional interface elements. Finally different criteria for the determination of the crack propagation angle are investigated and applied to numerical tests of cracked concrete specimens, which are compared with experimental results. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30303 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MATHEMATICAL DESCRIPTION OF SELF-EXCITED VIBRATIONS IN SILO WALLS N2 - The paper contains a description of dynamic effects in the silo wall during the outflow of a stored material. The work allows for determining the danger of construction damage due to resonant vibrations and is of practical importance by determining the influence of cyclic pressures and vibro–creeping during prolonged use of a silo. The paper was devised as a result of tests on silo walls in semi-technical scale. The model is generally applicable and allows for identification of parameters in real- size silos as well. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30294 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Trummer, Michael A1 - Denzler, J. A1 - Süße, Herbert ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - PRECISE 3D MEASUREMENT WITH STANDARD MEANS AND MINIMIAL USER INTERACTION - EXTENDED SINGLE-VIEW RECONSTRUCTION N2 - The paper proposes a new method for general 3D measurement and 3D point reconstruction. Looking at its features, the method explicitly aims at practical applications. These features especially cover low technical expenses and minimal user interaction, a clear problem separation into steps that are solved by simple mathematical methods (direct, stable and optimal with respect to least error squares), and scalability. The method expects the internal and radial distortion parameters of the used camera(s) as inputs, and a plane quadrangle with known geometry within the scene. At first, for each single picture the 3D position of the reference quadrangle (with respect to each camera coordinate frame) is calculated. These 3D reconstructions of the reference quadrangle are then used to yield the relative external parameters of each camera regarding the first one. With known external parameters, triangulation is finally possible. The differences from other known procedures are outlined, paying attention to the stable mathematical methods (no usage of nonlinear optimization) and the low user interaction with good results at the same time. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30282 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Traversoni, Leonardo ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MOVEMENT DETECTION AND RECOGNITION WITH QUATERNION WAVELETS N2 - We show how a Morlet type quaternion wavelet may be tuned to a pair of stereoscopic Ølms in order to detect moving objects and calculate its velocity shape volume and other characteristics. We show some practical examples of simple objects taken with normal pocket avi cameras. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30274 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Trautermann, Ronny T1 - Numerische Untersuchungen zum Verzug eines Feinkornbaustahles beim MAG-Schweißen N2 - Die Diplomarbeit leistet einen Betrag zur numerischen Untersuchung des Verzuges eines Feinkornbaustahles beim MAG-Schweißen. Ziel dabei war es, Informationen zu dem schweißbedingten Verzug beeinflussenden Größen zusammenzustellen, Angaben zu möglichen Berechnungsformeln des an einer T-Stoßverbindung durch das Schweißen entstehenden Winkelverzuges des Gurtes zu recherchieren und die Grundlagen für eine Verzugsberechnung mit Hilfe der Finite-Element-Methode darzustellen. Das Hauptinteresse lag dabei jedoch auf den durch das Schweißen von Kehlnähten entstehenden Winkelverzuges des Gurtes an T-Stoßverbindungen. Dieser wurde mit Hilfe numerischer Berechnungen untersucht. Dabei wurden die Einflüsse, welche geometrischen, werkstofflichen oder verfahrensbedingten Ursprungs seien können, betrachtet. KW - MAG-Schweißen KW - Winkelverzug KW - Schweißprozesssimulation Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7550 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - CHAP A1 - Szolomicki, Jerzy Pawel A1 - Baranski, Jacek ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES N2 - In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30265 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Szarata, Andrzej A1 - Starostina, T. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MAMDANI’S FUZZY INFERENCE SYSTEM AS A TOOL FOR MULTIMODAL SPLIT MODELING N2 - This paper presents results of applying Fuzzy Inference System for estimation of the number of potential Park and Ride users. Usually it is difficult to evaluate the number of users because it depends on human factor and data in the considered system are uncertain. In such situation the traditional mathematical approaches can not take into consideration rough data. Therefore a fuzzy approach can be applied in this case. A fuzzy methodology is treated as a proper way to describe choice of mode of transport, and especially that uncertainty accompanied of choosing process has rather fuzzy character. The proposed approach is based on the Mamdani Fuzzy Inference System and for calculation there is used Matlab software with Fuzzy Logic Toolbox. Mamdani model requires, as an input data, knowledge of the shape of membership function. These functions can be calibrated taking into consideration results of questionnaires conducted among users of Park and Ride system. Due to lack of representative sample of users, one has decided to use results of experts' questionnaires as a input data for calibration the shape of membership functions. Describing factor will be generalized cost of the trip for different modes of transport. Proposed approach consists of two main stages: modeling of share of public/private transport trips and Multimodal model estimating number of Park and Ride users. Verification of presented methodology is treated as an indirect proof. Proposed approach can be applied for estimation of bi-modal split. Then the results are compared with traditional approaches based on logit functions. Comparable results of proposed fuzzy approach with traditional logit models can be treated as a confirmation of chosen methodology. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30257 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Stoimenova, Eugenia A1 - Lins, Yvonne A1 - Datcheva, Maria A1 - Schanz, Tom ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INVERSE MODELLING OF SOIL HYDRAULIC CHARACTERISTIC FUNCTIONS N2 - In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content θ and suction ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of θ for any position along the column and (b) give the functional form for the scanning curves. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29858 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Stangenberg, Friedhelm ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - LIFETIME ORIENTED DESIGN CONCEPTS UNDER ASPECTS OF DEGRADATION N2 - Optimum technological solutions must take into account the entire life cycle of structures including design procedures as well as quality assurance, inspection, maintenance, and repair strategies. Unfortunately, current design standards do not provide a satisfactory basis to ensure expected structural lifetimes. The latter may vary from only a few years for temporary structures to over a century for bridges, water dams or nuclear repositories. Consistent scientific concepts are urgently required to cover this wide spectrum of lifetimes in structural design and maintenance. This was a motivation for a group of scientists at the Ruhr-University Bochum (RUB) to start a special research program supported by the German Research Foundation (DFG) within the Cooperative Research Center SFB 398 since 1996. Institutes of the University Wuppertal and of the University Essen-Duisburg joined the research group. The goal of the Center is to study sources of damage and deterioration in materials and structures, to develop consistent models and simulation methods, to predict structural lifetimes and finally to integrate this predictions into new lifetime-oriented design strategies. Research activities in our center are organised in three Project Groups as follows: - Modelling of lifetime effects - Methods for lifetime-oriented structural analyses - Future lifespan-oriented design strategies. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170328-29154 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Stahr, Alexander A1 - Ruth, Jürgen A1 - Wolkowicz, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ... WITHOUT RIGHT ANGLE. N2 - Currently sculptural design is one of the most discussed themes in architecture. Due to their light weight, easy transportation and assembly, as well as an almost unlimited structural variety, parameterised spatial structures are excellently suited for constructive realisation of free formed claddings. They subdivide the continuous surface into a structure of small sized nodes, straight members and plane glass panels. Thus they provide an opportunity to realise arbitrary double-curved claddings with a high degree of transparency, using industrial semi-finished products (steel sections, flat glass). Digital design strategies and a huge number of similar looking but in detail unique structural members demand a continuous digital project handling. Within a research project, named MYLOMESH, a free-formed spatial structure was designed, constructed, fabricated and assembled. All required steps were carried out based on digital data. Different digital connections (scripts) between varying software tools, which are usually not used in the planning process of buildings, were created. They allow a completely digital workflow. The project, its design, meshing, constructive detailing and the above-mentioned scripts are described in this paper. KW - Architektur KW - CAD KW - Arthur Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30248 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Spiekermann, Christoph A1 - Donath, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - DIGITAL SUPPORT OF MATERIAL- AND PRODUCT SELECTION IN THE ARCHITECTURAL DESIGN- AND PLANNING PROCESS N2 - Architecture is predominantly perceived over the surfaces limiting the space. The used surface materials thereby should support the design intention and have to fulfil various technical and economical requirements. If the architect wants to select the "right" or the "best" material he has to play with very different and sometimes contradicting criteria and must weight these individually for the special purpose. This selection process is supported only insufficiently by today's digital systems. If it would be possible to illustrate all the various parameters by numerical values, the method of multidimensional scaling will offer a solution for architects to find the material which is best fitting on basis of his individual weighting of criteria. By displaying the result of the architect's multidimensional query in a spatial arrangement multidimensional scaling can support an interactive selection process with additional feedback over the applied search strategy. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30235 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Sorge, Hans-Christian T1 - Technische Zustandsbewertung metallischer Wasserversorgungsleitungen als Beitrag zur Rehabilitationsplanung T1 - Technical condition assessment of metallic water supply pipes as part of their rehabilitation planning N2 - Die Instandhaltung der städtischen Trinkwassernetze ist Aufgabenschwerpunkt der Wasserversorgungsunternehmen bzw. Netzbetreiber. Dazu notwendige Rehabilitationsplanungen stützen sich zurzeit weitgehend auf die Trendprognose von Schadensraten und die Erfahrungen der Mitarbeiter. Der Einfluss wesentlicher Kenngrößen wie Werkstoffeigenschaften oder die Resttragfähigkeit des Rohres bleiben hierbei größtenteils unberücksichtigt. Über materialtechnische Untersuchungen werden die notwendigen Kenngrößen ermittelt, die eine zuverlässige Bewertung des technischen Zustands des Rohrstrangs ermöglichen. So lassen sich die Prognose der technischen Nutzungsdauer und Rehabilitationsplanungen auf eine solide Basis stellen. In dieser Dissertationsschrift wird hierzu ein Untersuchungs- und Bewertungsalgorithmus mit integrierten Prognoseverfahren erarbeitet. N2 - The maintenance of water supply systems is the main task for water utilities. The requisite planning of rehabilitation/ maintenance is based on forecasting methods of failure frequency of water mains and the experience of the staff. But the influences of important parameters like material characteristics or remaining structural load capacity are mostly unconsidered. Technical tests and the analysis of the properties of the pipe material provide specific parameters. These parameters allow forecasting methods of the operating life and the planning of rehabilitation on a sound basis. Therefore algorithms for examination and assessments with integrated forecast methods were created in this dissertation. KW - Instandhaltungsplanung KW - Nutzungsdauer KW - Rohrleitung KW - Korrosionsprüfung KW - Metallographie KW - Prognosemodell KW - technische Nutzungsdauer KW - Korrosionsgeschwindigkeit KW - Resttragfähigkeit KW - Bodenaggressivität KW - Wasserversorgung KW - Maintenance KW - remaining load capacitiy KW - leakages Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070516-8681 ER - TY - CHAP A1 - Skowronek, Marek ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - PROBABILISTIC LIMIT STATE ANALYSIS OF MONUMENTAL STRUCTURE BY MONTE CARLO SIMULATION N2 - The concept is presented of the sensitivity analysis of the limit state of the structure with respect to selected basic variables. The sensitivity is presented in the form of the probability distribution of the limit state of the structure. The analysis is performed by the problem-oriented Monte Carlo simulation procedure. The procedure is based on the problem's definition of the elementary event, as a structural limit state. Thus the sample space consists of limit states of the structure. Defined on the sample space the one-dimensional random multiplier is introduced. This multiplier refers to the dominant basic variable (group of variables) of the problem. Numerical procedure results in the set of random numbers. Normalized relative histogram of this set is an estimator of the PDF of the limit state of the structure. Estimators of reliability, or the probability of failure are statistical characteristics of this histogram. The procedure is illustrated by the example of sensitivity analysis of the serviceability limit state of monumental structure. It is the colonnade of Licheń Basilica, situated in central Poland. Limit state of the structure is examined with reference to the upper deck horizontal deflection. Wind actions are taken as dominant variables. An assumption is made that the wind load intensities acting on the lower and on the upper storey of the colonnade, respectively, are identically distributed, but correlated random variables. Three correlation variants of these variables are considered. Relevant limit state histograms are analysed thereafter. The paper ends with the conclusions referring to the method and some general remarks on the fully probabilistic design. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30222 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Siekierski, Wojciech ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VARIATION OF ROTATIONAL RESTRAINT IN GRID DECK CONNECTION DUE TO CORROSION DAMAGE AND STRENGTHENING N2 - The approach to assessment of rotational restraint of stringer-to-crossbeam connection in a deck of 100-year old steel truss bridge is presented. Sensitivity of rotational restraint coefficient of the connection to corrosion damage and strengthening is analyzed. Two criteria of the assessment of the rotational restraint coefficient are applied: static and kinematic one. The former is based on bending moment distribution in the considered member, the latter one – on the member rotation at the given joint. 2D-element model of finite element method is described: webs and flanges are modeled with shell elements, while rivets in the connection – with system of beam and spring elements. The method of rivet modeling is verified by T-stub connection test results published in literature. FEM analyses proved that recorded extent of corrosion damage does not alter the initial rotational restraint of stringer-to-crossbeam connection. Strengthening of stringer midspan influences midspan bending moment and stringer end rotation in a different way. Usually restoring member load bearing capacity means strengthening its critical regions (where the highest stress levels occur). This alters flexural stiffness distribution over member length and influences rotational restraint at its connection to other members. The impact depends on criterion chosen for rotational restraint coefficient assessment. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30217 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Shapiro, Michael ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ON HYPERHOLOMORPHIC POLYNOMIALS FOR THE CAUCHY-RIEMANN AND THE DIRAC OPERATORS OF CLIFFORD ANALYSIS N2 - Clifford Analysis, hyperholomorphic polynomials, Taylor Series. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30201 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Seyler, Steve A1 - Schwarz, W. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MODERN PHOTOGRAMMETRY IN CIVIL ENGINEERING - EXAMPLES FOR MONITORING AND EVALUATION N2 - Monitoring und Bewertung sind Hauptaufgaben im Management bzw. der Revitalisierung von Bauwerken. Unterschiedliche Verfahren können bei der Akquisition der erforderlichen geometrischen Information, wie z. B. Größe oder Verformung eines Gebäudes, eingesetzt werden. Da das Potenzial der digitalen Fotografie kontinuierlich wächst, stellt die Industriephotogrammetrie heute eine bedeutende Alternative zu den klassischen Verfahren wie Dehnmessstreifen oder anderen taktilen Sensoren dar. Moderne Industriephotogrammetrie erfasst die Bilder mittels digitaler Systeme. Dies bedeutet, dass die Information digitaler Bilder mit Hilfe der digitalen Bildverarbeitung untersucht werden muss, um die Bildkoordinaten der Messpunkte zu erhalten. Eine der Aufgaben der Bildverarbeitung für photogrammetrische Zwecke besteht somit darin, den Mittelpunkt von kreisförmigen Marken zu lokalisieren. Die modernen Operatoren liefern Subpixelgenauigkeit für die Koordinaten des Punktes. Das optische Messverfahren der Industriephotogrammetrie erfordert hinsichtlich der Hardware in erster Linie hochauflösende digitale Kameras. Dabei lassen sich die Kameras in Videokameras, HighSpeed-Kameras, intelligente Kameras sowie so genannte Consumer und Professionelle Kameras unterscheiden. Die geometrische Auflösung digitaler HighEnd-Kameras liegt heute bei über 10 Megapixel. In punkto Datentransfer zum Rechner sind verschiedene Standards am Markt verfügbar, z. B. USB2.0, GigE-Vision, CameraLink oder Firewire. Die Wahl des Standards hängt immer von der spezifischen Aufgabenstellung ab, da keine der Techniken eine führende Position einnimmt. Die moderne Photogrammetrie bietet viele neue Möglichkeiten für das Monitoring und die Bewertung von Bauwerken. Sie kann ein-, zwei-, drei- oder vierdimensionale Informationen liefern, falls erforderlich auch in Echtzeit. Als berührungsloses Messverfahren ist der Einsatz der Photogrammetrie noch möglich, wenn die taktilen Sensoren z. B. aufgrund ihres Platzbedarfes nicht mehr eingesetzt werden können. Hochauflösende Videokameras erlauben es, selbst dynamische Untersuchungen mit großer Präzision durchzuführen. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30192 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Seidel, Tilman A1 - Gasser, Ingenuin A1 - Werner, Bodo ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY N2 - Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30187 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schönberger, Karsten A1 - Hermann, F. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - COMPUTERGESTÜTZTES PORTFOLIOMANAGEMENT – EIN PRAXISBEISPIEL N2 - Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das größte Wohnungsunternehmen in Thüringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerstände und unterschiedliche Modernisierungsmaßnahmen und -stände unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivität, die Standortqualität und die Objektwirtschaftlichkeit fällt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. Über die Schritte der technischen Bestandserfassung, die Einwertung über ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugehöriger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-jährigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30168 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schleinkofer, Matthias A1 - Schäfer, T. A1 - van Treeck, Christoph A1 - Rank, Ernst ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VOM LASERSCAN ZUM PLANUNGSTAUGLICHEN PRODUKTMODELL N2 - Im Bereich der Altbausanierung und der Bestandserfassung im Bauwesen ist es häufig notwendig, bestehende Pläne hinsichtlich des Bauwerkszustandes zu aktualisieren oder, wenn diese Pläne nicht (mehr) zugänglich sind, gänzlich neue Planunterlagen des Ist-Zustandes zu erstellen. Ein komfortabler Weg, diese Bauwerksdaten zu erheben, eröffnet die Technologie der Laservermessung. Der vorliegende Artikel stellt in diesem Zusammenhang Ansätze zur Teilautomatisierung der Generierung eines dreidimensionalen Computermodells eines Bauwerkes vor. Als Ergebnis wird ein Volumenmodell bereitgestellt, in dem zunächst die geometrischen und topologischen Informationen über Flächen, Kanten und Punkte im Sinne eines B-rep Modells beschrieben sind. Die Objekte dieses Volumenmodells werden mit Verfahren aus dem Bereich der künstlichen Intelligenz analysiert und in Bauteilklassen systematisch kategorisiert. Die Kenntnis der Bauteilsemantik erlaubt es somit, aus den Daten ein Bauwerks-Produktmodell abzuleiten und dieses einzelnen Fachplanern – etwa zur Erstellung eines Energiepasses – zugänglich zu machen. Der Aufsatz zeigt den erfolgreichen Einsatz virtueller neuronaler Netze im Bereich der Bestandserfassung anhand eines komplexen Beispiels. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30159 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schiller, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CONSTRAINED TRAFFIC DEMAND MODELS - SIMULTANEOUS DISTRIBUTION AND MODE CHOICE N2 - Unconstrained models are very often found in the broad spectrum of different theories of traffic demand models. In these models there are none or only one-sided restrictions influencing the choice of the individual. However in the traffic demand different deciding dependencies of the traffic volume with regard to the specific conditions of the territory structure potentials exist. Kichhoff and Lohse introduced bi- and tri-linearly constrained models to show these dependencies. In principle, the dependencies are described as hard, elastic and open boundary sum criteria. In this article a model is formulated which gets away from these predefined boundary sum criteria and allows a free determination of minimal and maximal boundary sum criteria. The iterative solution algorithm is shown according to a FURNESS procedure at the same time. With the approach of freely selectable minimal and maximal boundary sum criteria the modeling transport planner gets the possibility to show the traffic event even better. Furthermore all common boundary sum criteria can be calculated with this model. Therewith the often necessary and sensible standard and special cases can also be modeled. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30148 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Scherer, Klaus A1 - Grinewitschus, Viktor ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTEGRIERTE SYSTEMBEDIENUNG IN GEBÄUDEN: KOMPLEXE TECHNIK EINFACHER HANDHABEN N2 - Räume und Gebäude sind heute wegen der enormen Funktionalität der technischen Gebäudeausrüstung (TGA) in Kombination mit der sonstigen Ausstattung und den diversen Anwendungsprozessen und Nutzergruppen ohne innovative Konzepte der integrierten Bedienung kaum noch beherrschbar bzw. optimal nutzbar. Dies gilt sowohl für Wohn- als auch für Zweckimmobilien. Die Gebäudeleittechnik (GLT) und die Gebäudeautomation (GA) können hier unter sinnvoller Integration der Möglichkeiten der Mikroelektronik, Multimedia-, Kommunikations- und Informationstechnik erheblich zu nutzbringenden Innovationen beitragen. Die Automobilindustrie hat in den letzten Jahren gezeigt, wie durch einen integralen Systemansatz und durch Einsatz von Elektronik, Kommunikations- und Informationstechnik eine sinnvolle technische Assistenz der Anwender machbar ist. Genannt sei hier das Konzept des Cockpits mit integrierter Funktionsbündelung und der Informationskonzentration am Armaturenbrett. Im Gegensatz zum Automobil ist der Bereich der technischen Gebäudeausstattung in Wohn- und Nutzimmobilien gekennzeichnet durch eine starke Fragmentierung in unterschiedlichste Gewerke unter Beteiligung vieler oft schlecht koordinierter Akteure. Durch das Duisburger inHaus-Innovationszentrum für Intelligente Raum- und Gebäudesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren neuartige Konzepte der Systemintegration heterogener Technik auf der Basis von Middleware-Plattformen und Multimedia-Technologien und -Geräten entwickelt, getestet und in die Anwendung getragen. Einer der ersten Systemanwendungen dieses offenen Infrastrukturkonzepts ist die integrierte Systembedienung mit zum Teil völlig neuen Bedienkonzepten und einer starken Bedienungsvereinfachung auch komplexester Technikausrüstungen in Immobilien. Der Beitrag beschreibt nach einer Analyse der Ausgangslage die technologischen Grundzüge der integrierten Systembedienung. Es folgen einige Anwendungsbeispiele und eine zusammenfassende Bewertung mit einem Ausblick auf weiterführende Aktivitäten. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30132 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Scherer, Klaus A1 - Grinewitschus, Viktor ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ FÜR FACILITY MANAGEMENT UND ANWENDUNG N2 - Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsfähigkeit in kleinsten Formaten, mit geringsten Energien und zu günstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Geräten und Systemen ist nunmehr zur Selbstverständlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir nähern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der überall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen täglichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die größeren Computerkomponenten (z.B. PCs, Server) über Datenschnittstellen zu räumlich verteilten Netzwerken verknüpft (z.B. Internet, Intranet) und mit einer systemübergreifenden und adäquaten Intelligenz (Software) programmiert, so können neuartige Funktionalitäten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Gebäuden und Räumen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Gebäudephysik, technischer Gebäudeausrüstung (TGA) und Gebäudeautomation (GA) im Wege stehende Gewerketrennung zu überwinden. Es entstehen für div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erläuterte Beispiele für AmI-Lösungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notfällen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im Büro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Gebäuden. Im Duisburger inHaus-Innovationszentrum für Intelligente Raum- und Gebäudesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste Lösungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen Möglichkeiten für den Transfer dieser neuen Technologie in den Raum- und Gebäudebereich. Es folgt eine abschließende Zusammenfaßung und eine Einschätzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29140 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schapke, Sven-Eric A1 - Scherer, Raimar J. A1 - Katranuschkov, Peter ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SEMANTIC SERVICE ENVIRONMENTS FOR INTEGRATING TEXT WITH MODEL-BASED INFORMATION IN AEC/FM N2 - In distributed project organisations and collaboration there is a need for integrating unstructured self-contained text information with structured project data. We consider this a process of text integration in which various text technologies can be used to externalise text content and consolidate it into structured information or flexibly interlink it with corresponding information bases. However, the effectiveness of text technologies and the potentials of text integration greatly vary with the type of documents, the project setup and the available background knowledge. The goal of our research is to establish text technologies within collaboration environments to allow for (a) flexibly combining appropriate text and data management technologies, (b) utilising available context information and (c) the sharing of text information in accordance to the most critical integration tasks. A particular focus is on Semantic Service Environments that leverage on Web service and Semantic Web technologies and adequately support the required systems integration and parallel processing of semi-structured and structured information. The paper presents an architecture for text integration that extends Semantic Service Environments with two types of integration services. Backbone to the Information Resource Sharing and Integration Service is a shared environment ontology that consolidates information on the project context and the available model, text and general linguistic resources. It also allows for the configuration of Semantic Text Analysis and Annotation Services to analyse the text documents as well as for capturing the discovered text information and sharing it through semantic notification and retrieval engines. A particular focus of the paper is the definition of the overall integration process configuring a complementary set of analyses and information sharing components. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30125 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schanz, Tom A1 - Wuttke, Frank A1 - Dineva, Petia ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - HYBRID APPROACH OF WAVE NUMBER INTEGRATION-BOUNDARY INTEGRAL EQUATION METHOD FOR SITE EFFECT ESTIMATION OF A LATERALLY VARYING SEISMIC REGION N2 - In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content Θ and suction Ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable Θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of Θ for any position along the column and (b) give the functional form for the scanning curves. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29132 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - RPRT A1 - Schaber, Carsten T1 - Strategic Developments T2 - Yearbook of Model Projects 2005 / 2006 N2 - The report is about the role of Regional Development Agencies (RDAs)in England. These were founded in 1999. At first their concept, aims and orgins are addressed. Secondly the work of such an agency is explained exemplary by introducing the monitoring report Strategic Developments. KW - Landesentwicklungsgesellschaft KW - Strategische Planung KW - Strategische Projekte KW - LEG KW - Monitoring Bericht KW - Strategic Development KW - RDA KW - Monitoring Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8207 ER - TY - THES A1 - Schaber, Carsten T1 - Space Syntax als Werkzeug zur Analyse des Stadtraums und menschlicher Fortbewegung unter besonderer Berücksichtigung schienengebundener Verkehrssysteme N2 - Für das städtische Leben hat die Existenz sich verändernder Personenströme eine grundlegende Bedeutung. Ein Werkzeug, das solche kollektiven Bewegungsmuster sichtbar machen kann, wäre dabei ein bedeutendes Hilfsmittel für die Stadtplanung. Im Mittelpunkt der vorliegenden Arbeit steht die Auseinandersetzung mit der Space Syntax Methode. Diese untersucht den Zusammenhang räumlicher Strukturen mit deren Nutzung. Eine wichtige Erkenntnis ist, dass das kollektive menschliche Verhalten im öffentlichen Raum berechenbar ist. Die Tatsache, dass Passanten bestimmte Wege bevorzugen und andere meiden, führt Space Syntax dabei auf stadträumliche Ursachen zurück. Der Begriff des Natural Movement beschreibt den Anteil dieser räumlich bedingten Nutzung. Die vorliegende Arbeit gliedert sich in einen theoretischen und einen praktischen Teil. Zunächst werden die für das Verständnis der Space Syntax Methode wichtigen Begriffe und Maßgrößen beschrieben. Der methodische Teil wird ergänzt durch eine Gegenüberstellung nutzer-basierter wissenschaftlicher Ansätze mit der räumlich-orientierten Space Syntax Methode. Im zweiten Teil der Arbeit wird die praktische Anwendung der Space Syntax Methode am Beispiel des Leipziger City-Tunnels vorgenommen. Das Fallbeispiel ist prädestiniert für die Untersuchung, wie die regionale Vernetzung des Schienenverkehrs aktuell betrieben wird. Von Interesse ist dabei sowohl die Konzeption des zukünftigen Liniennetzes als auch dessen stadträumliche Einbindung. KW - Urbanistik KW - Städtebau KW - Mobilität KW - Netzwerkwissenschaften Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140204-21129 N1 - Die Forschungsarbeit wurde im Rahmen eines EU-Stipendiums gefördert. Eine modifizierte englische Fassung ist unter einer leicht variierten Fragenstellung im OPUS zu finden. Titel "The flow of people as an indicator" ER - TY - CHAP A1 - Sampaio, Alcinia Zita A1 - Henriques, Pedro A1 - Studer, P. A1 - Luizi, Rui ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES N2 - The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30090 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Udo F. A1 - Lange, Michael ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - KOOPERATIVE BRANDSCHUTZPLANUNG MIT SOFTWARE-AGENTEN N2 - Die effektive Kooperation aller beteiligten Fachplaner im Bauplanungsprozess ist die Voraussetzung für wirtschaftliches und qualitativ hochwertiges Bauen. Bauprojektorganisationen bestehen in der Regel aus zahlreichen unabhängigen Planungspartnern, die örtlich verteilt spezifische Planungsaufgaben bearbeiten und die Ergebnisse in Teilproduktmodellen ablegen. Da Planungsprozesse im Bauwesen stark arbeitsteilig ablaufen, sind die Teilproduktmodelle der einzelnen Fachplanungen in hohem Maße voneinander abhängig. Ziel des hier vorgestellten Ansatzes ist die Integration der Teilproduktmodelle der Gebäudeplanung in einem netzwerkbasierten Modellverbund am Beispiel der Brandschutzplanung. Im Beitrag werden die Probleme der Verteiltheit und insbesondere der semantischen Heterogenität der involvierten Teilproduktmodelle betrachtet. Der verteilte Zugriff wird mithilfe mobiler Software-Agenten realisiert. Die Agenten können sich dabei frei im netzwerkbasierten Planungsverbund bewegen und agieren als Vertreter der Fachplaner. Das Problem der semantischen Heterogenität der Teilproduktmodelle wird auf der Basis von Ontologien gelöst. Dazu werden erstens Domänenontologien entwickelt, die Objekte der realen Welt einer abgeschlossenen Domäne, hier des Brandschutzes, abbilden. Zweitens werden Applikationsontologien entwickelt, die die einzelnen proprietären Datenhaltungen (im Sinne von Teilproduktmodellen) der jeweiligen Fachplanungen repräsentieren. Beide Ontologien werden mit einem regelbasierten Ansatz verknüpft. Im vorgestellten Anwendungsfall Brandschutz dient die Domänenontologie als einheitliche Schnittstelle für den Zugriff auf die verteilten Modelle und abstrahiert dabei von deren Datenbankspezifika und proprietären Schemata. Mithilfe von mobilen Agenten und semantischen Technologien kann so eine Plattform zur Verfügung gestellt werden, die erstens die dynamische Integration von Ressourcen in den Planungsverbund erlaubt und zweitens auf deren Basis unabhängig von der Verteiltheit und Heterogenität der eingebundenen Ressourcen ingenieurgerechte Verarbeitungsmethoden realisiert werden können. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30071 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Rößler, Christiane T1 - Hydratation, Fließfähigkeit und Festigkeitsentwicklung von Portlandzement – Einfluss von Fließmitteln, Alkalisulfaten und des Abbindereglers T1 - Hydration, fluidity and strength development in Portland cement – influence of superplasticizers, alkali sulphates and set regulator N2 - Eine zielführende Anwendung von Zusatzmitteln bei der Ausführung anspruchsvoller Betonbauten setzt einen hohen Kenntnisstand bezüglich der Wirkungsmechanismen und Interaktionen der einzelnen Betonkomponenten voraus. In der vorliegenden Arbeit wurden einige Aspekte der Zementhydratation in Abhängigkeit von der Fließmittelzugabe diskutiert. Im Ergebnis liefern die Teile eins und zwei der vorliegenden Arbeit einen Beitrag dazu, Veränderungen der Fließfähigkeit von Zementleim in Abhängigkeit der Zementhydratation und Fließmittelzugabe besser zu verstehen. Es konnte so z.B. gezeigt werden, dass Bildung langprismatischer Kristalle (z.B. Syngenit, Gips) die Fließfähigkeit von Zementleim und Beton vermindert. Infolge anhaltender Scherung von Zementleimen / Betonen mit langprismatischen Kristallen wird ein Zuwachs an Fließfähigkeit erzielt. Elektronenmikroskopische Untersuchungen zeigen, dass dies darauf zurückzuführen ist, dass die Kristalle in eine Vorzugsorientierung relativ zur Scherbewegung rotieren. Weiterhin wurde der Mechanismus einer so genannten Zement-Fließmittel-Inkompatibilität aufgezeigt. Durch diese Erweiterung des Kenntnisstandes zum Einfluss von Fließmitteln auf die Zementhydratation ist es möglich der Zement-Fließmittel-Inkompatibilität durch gezielte Auswahl des Zementes vorzubeugen. Dabei ist besonders darauf zu achten, dass der Zement ein ausgewogenes Verhältnis an zur Reaktion zur Verfügung stehendem C3A und Menge / Löslichkeit des Abbindereglers besitzt. Fließmittel verändern nicht nur die Verarbeitungseigenschaften sondern auch die Festigkeit und Dauerhaftigkeit von Zementstein und Beton. Im dritten Teil der vorliegenden Arbeit wird daher der Einfluss der Fließmittel und deren verflüssigender Wirkung auf die Festigkeitsentwicklung von Zementstein und C3S untersucht. Es konnte gezeigt werden, dass durch die dispergierende Wirkung der Fließmittel auch ohne Verminderung des Wasserzementwertes, eine Verdichtung des Zementsteingefüges erzielt werden kann. Es konnte weiterhin gezeigt werden, dass durch die Erhöhung der Partikelpackungsdichte am Anfang der Hydratation die Ausbildung der festigkeitsgebenden C-S-H Phasen verändert wird. Ein dichteres Verwachsen dieser nanostrukturierten C-S-H Phasen ermöglicht einen zusätzlichen Festigkeitszuwachs. N2 - The construction of sophisticated concrete buildings requires the pinpointed application of concrete additives. This requires a high level of knowledge concerning the interaction and mode of action of individual concrete components. The presented study aims to improve the understanding of the concrete components cement and superplasticizers. Main focus is laid on the influence of superplasticizers on cement hydration reactions and the consequences for cement and concrete performance characteristics (fluidity and strength). Results of parts one and two of the thesis reveal how the fluidity of cement paste is influenced by cement hydration and addition of superplasticizers. It is shown that the formation of long prismatic crystals like syngenite and gypsum decreases the fluidity of cement pastes and concrete. This decrease in fluidity is partly reversible if the suspension is continuously stirred. It was proven by scanning electron microscopy (SEM) that this gain in fluidity is caused by the rotation of long prismatic crystals into a preferred orientation. Furthermore the cause of a cement-superplasticizers-incompatibility was identified. The knowledge of this mechanism is essential for a successful selection of cement type in combination with superplasticizers. Results showed that for an effective selection of polycarboxylate-type superplasticizer and cement, it is essential that the ratio of aluminate clinker phases (C3A) to the amount / solubility of set regulator is appropriate. Superplasticizers improve not only the fluidity but also the compressive strength of cement and concrete. The third part of the thesis shows how the liquefying action of superplasticizers influences the strength development of cement and C3S pastes. Thus it was shown that a densification of the cement microstructure is achieved by the superplasticizers dispersing action. The increased particle packing density caused by superplasticizers in the suspension state of cement pastes increases the intergrowth of strength determining C-S-H phases. This leads to an increase in compressive strength without diminishing the water to cement ratio. KW - Zement KW - Hydratation KW - Mikrostruktur KW - Betonverflüssiger KW - Festigkeit KW - Fließverhalten KW - Alkalisulfate KW - Abbinderegler KW - C-S-H Phasen KW - Fließmittel KW - cement KW - hydration KW - microstructure KW - superplasticizer KW - strength KW - fluidity KW - C-S-H phases KW - set regulator Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070206-8425 N1 - ISBN 978-3-8325-1490-7, Logos Verlag Berlin, 2007 ER - TY - CHAP A1 - Ryan, John A1 - Kraußhar, Rolf Sören ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYSIS OF DIRAC OPERATORS ON SOME CONFORMALLY FLAT MANIFOLDS N2 - In this paper we shall review the role of Dirac operators arising in Clifford analysis over some examples of conformally flat manifolds. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30081 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Rohr, Stefan ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NEUE MÖGLICHKEITEN IN DER ABLAUFPLANUNG DURCH DIE EREIGNISORIENTIERTE SIMULATION VON PRODUKTIONSPROZESSEN N2 - Durch die Betrachtung des Produktions-Prozesses als zentrales Transformationselement wird die Struktur der Bauproduktion realitätsnah gefasst. Die Integration der prozessorientierten Kostendefinition setzt relevante Kostenparameter und Produktionsfaktoren so in Beziehung, dass sie im Einklang mit der realen Kostenstruktur und Kostendynamik einer Baustelle stehen. Die Beziehung zwischen Bauzeit und Kosten wird direkt erfasst und ausgewertet. Der hohen Dynamik der Bauproduktion zwischen kapazitätsbeschränkten Einsatzmitteln und Produktionsprozessen wurde durch das Poolmodell und der Simulation als Berechnungsmethode Rechnung getragen. Eine einfache Modellierung von sich zyklusartig wiederholenden Arbeitsvorgängen (Taktplanung) ist möglich. Die Taktbildung vollzieht sich bei der Simulation durch Kapazitätsbeschränkungen ohne Zutun des Benutzers. Durch eine Optimierungsmethode kann automatisiert nach der kostengünstigsten oder zeitlich schnellsten Produktionsvariante gesucht werden KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30060 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Rogoża, Agnieszka A1 - Stachon, T. A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS N2 - The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30050 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Richter, Katharina A1 - Donath, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AUGMENTING DESIGNERS MEMORY - REVISAL OF THE CASE-BASED REASONING PARADIGM IN ARCHITECTURAL EDUCATION AND DESIGN N2 - This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30047 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NUMERISCHE ANALYSE VON VERBUNDQUERSCHNITTEN MIT NICHTLINEAREM MATERIALVERHALTEN UNTER BERüCKSICHTIGUNG VON VORVERFORMUNGEN N2 - The presented method for an physically non-linear analysis of stresses and deformations of composite cross-sections and members based on energy principles and their transformation to non-linear optimisation problems. From the LAGRANGE principle of minimum of total potential energy a kinematic formulation of the mechanical problem can be developed, which has the general advantage that pre-deformations excited by shrinkage, temperature, residual deformations after unloading et al., can be considered directly. Thus the non-linear analysis of composite cross-sections with layers of different mechanical properties and different preloading becomes possible and cracks in concrete, stiffness degradation and other specifics of the material behaviour can be taken into account without cardinal modification of the mathematical model. The impact of local defects on the bearing capacity of an entire element can also be analysed in this principle way. Standard computational systems for mathematical optimisation or general programs for spreadsheet analysis enable an uncomplicated implementation of the developed models and an effective non-linear analysis for composite cross-sections and elements. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30039 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Raue, Erich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NICHTLINEARE ANALYSE VON VERBUNDQUERSCHNITTEN - EIN NEUER ALTERNATIVER WEG N2 - A new approach to the non-linear analysis of cross-sections loaded by normal forces and bending moments is presented in the paper. The mechanical model is based on the LAGRANGE principle of minimum of total potential energy. Deformations, stresses and limit load parameters are obtained by solving a non-linear optimisation problem. The mathematical model is independent of the specifics of material. In addition to the stress strain relation and the specific strain energy W(ε) two further functions F(ε) and Φ(ε) are introduced to describe the material behaviour. Thus cracks in concrete, non-linearity of material etc. can be taken into account without basic modification of the numerical algorithm. For polygonal cross-sections the GAUSS' integral theorem is used. Numerical solutions of the non-linear optimisation problems can be found by application of standard software. Thus the analysis of reinforced concrete cross-sections or more general composite cross-sections with non-linear behaviour of material is as simple as in the case of linear elasticity. The application of the method is demonstrated for polygonal cross-sections. Pre-stresses or pre-strains can easily be included in the mathematical model. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30027 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Pham, Hoang Anh ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE EXCITATION FOR SELECTIVE SENSITIVITY-BASED STRUCTURAL IDENTIFICATION N2 - Major problems of applying selective sensitivity to system identification are requirement of precise knowledge about the system parameters and realization of the required system of forces. This work presents a procedure which is able to deriving selectively sensitive excitation by iterative experiments. The first step is to determine the selectively sensitive displacement and selectively sensitive force patterns. These values are obtained by introducing the prior information of system parameters into an optimization which minimizes the sensitivities of the structure response with respect to the unselected parameters while keeping the sensitivities with respect to the selected parameters as a constant. In a second step the force pattern is used to derive dynamic loads on the tested structure and measurements are carried out. An automatic control ensures the required excitation forces. In a third step, measured outputs are employed to update the prior information. The strategy is to minimize the difference between a predicted displacement response, formulated as function of the unknown parameters and the measured displacements, and the selectively sensitive displacement calculated in the first step. With the updated values of the parameters a re-analysis of selective sensitivity is performed and the experiment is repeated until the displacement response of the model and the actual structure are conformed. As an illustration a simply supported beam made of steel, vibrated by harmonic excitation is investigated, thereby demonstrating that the adaptive excitation can be obtained efficiently. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30015 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Petrova, Lyllia B. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - STATIC ANALYSIS ON MODELS OF CONTINUOUS ORTHOTROPIC THIN-WALLED PRISMATIC SHELL STRUCTURES N2 - The paper presents a linear static analysis on continuous orthotropic thin-walled shell structures simply supported at the transverse ends with a random deformable contour of the cross section. The external loads can be random as well. The class of this structures involves most of the bridges, scaffold bridges, some roof structures etc. A numerical example of steel continuous structures on five spans with an open contour of the cross-section has been solved. The examination of the structure has used the following two computation models: a prismatic structure consisting of isotropic strips, a plates and ribs, with considering their real interaction, and a smooth orthotropic plate equivalent to the structure in the first model. The displacements and forces of the structure characterizing its stressed and deformed condition have been determined. The results obtained from the two solutions have been analyzed. The study on the structure is made with the force method in combination with the analytical finite strip method (AFSM) in displacements. The basic system is obtained by separating the superstructure from the understructure at the places of intermediate supports and consists of two parts. The first part is a single span thin-walled prismatic shell structure; the second part presents supports (columns, space frames etc.). The connection between the superstructure and intermediate supports is made under random supporting conditions. The forces at the supporting points in the direction of the connections removed are assumed to be the basic unknowns of the force method. The solution of the superstructure has been accomplished by the AFSM in displacements. The structure is divided in only one (transverse) direction into a finite number of plain strips connected to each other in longitudinal linear nodes. The three displacements of the points on the node lines and the rotation around those lines have been assumed to be the basic unknown in each node. The boundary conditions of each strip of the basic system correspond to the simply support along the transverse ends and the restraint along the longitudinal ones. The particular strip of the basic system has been solved by the method of the single trigonometric series. The method is reduced to solving a discrete structure in displacements and restoring its continuity at the places of the sections made in respect to both the displacements and forces. The two parts of the basic system have been solved in sequence under the action of single values of each of the basic unknowns and with the external load. The solution of the support part is accomplished using software for analyzing structures by the FEM. The basic unknown forces have been determined from system of canonic equations, the conditions of the deformations continuity on the places of the removed connections under superstructure and intermediate supports. The final displacements and forces at a random point of a continuous superstructure have been determined using the principle of superposition. The computations have been carried by software developed with Visual Fortran version 5.0 for PC. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30007 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Perepelitsa, V. A. A1 - Tebueva, F.B. A1 - Shenkao, Timour ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SOLVABILITY EXPLORATION OF SEGMENTATION PROBLEM WITH LINEAR CONVOLUTION ALGORITHMS N2 - The paper is dedicated to decidability exploration of market segmentation problem with the help of linear convolution algorithms. Mathematical formulation of this problem represents interval task of bipartite graph cover by stars. Vertices of the first partition correspond to types of commodities, vertices of the second – to customers groups. Appropriate method is offered for interval problem reduction to two-criterion task that has one implemented linear convolution algorithm. Unsolvability with the help of linear convolution algorithm of multicriterion, and consequently interval, market segmentation problem is proved. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29999 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Paolucci, Anna Maria A1 - Venturino, Ezio ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NONLINEAR DYNAMICS AND WAVELETS IN DISCRETE BIOMATHEMATICAL MODELS N2 - A discrete ecoepidemiological model is considered. Its dynamics is studied by using wavelet decomposition. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29984 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Ostrowski, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTEGRATED MATHEMATICAL MODELLING AS A BASIS FOR DECISION MAKING IN WATER MANAGEMENT N2 - Water resources development and management is a complex problem. It includes the design and operation of single system components, often as part of larger interrelated systems and usually on the basis of river basins. While several decades ago the dominant objective was the maximization of economic benefit, other objectives have evolved as part of the sustainable development envisaged. Today, planning and operation of larger water resources systems is practically impossible without adequate computer tools, normally being one or several models, increasingly combined with data bank management systems and multi criteria assessment procedures in decision support systems. The use of models in civil engineering already has a long history when structural engineering is considered. These design support models, however, must rather be seen as expert systems made to support the engineer with his daily work. They often have no direct link to stakeholders and the decision makers community. The scale of investigation is often much larger in water resources engineering than in structural engineering which is related to different stakeholders and decision making procedures. Still, several similarities are obvious which can be summarized as the search for a compromise solution on a complex, i.e. multiobjective and interdisciplinary decision problem. While in structural engineering e.g. aestetics, stability and energy consumption might be important evaluation criteria in addition to construction and maintenance cost other or additional criteria have to be considered in water resources planning such as political, environmental and social criteria. In this respect civil engineers tend to overemphasize technical criteria. For the future the existing expert systems should be embedded into an improved decision support shell, keeping in mind that decision makers are hardly interested in numerical modelling results. The paper will introduce into the problem and demonstrate the state of the art by means of an example. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29979 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Nönnig, Jörg Rainer T1 - ARCHITEKTUR, SPRACHE, KOMPLEXITÄT : Acht Essays zur Architekturepistemologie T1 - ARCHITECTURE, LANGUAGE, COMPLEXITY : Eight Essays on Architectural Epistemology N2 - Komplexität ist ein genuin architektonisches Problem. Der Begriff von Architektur als einer universellen Praxis bzw. ganzheitlichen Erkenntnisweise enthält bereits im Kern den Begriff 'Komplexität'. Beide Konzepte fallen weithin zusammen – Architektur kann damit als spezifische Denkform des Komplexen betrachtet werden. Das in der Arbeit aufgezeigte Dilemma besteht darin, dass der modernen Architektur ihr ursprünglicher Gestaltungsgegenstand – Komplexität – abhanden gekommen ist: 'Nönnig dekonstruiert zu Recht die hoch aggregierten Begriffe des Raumes und des Entwurfs. Die gesamte Arbeit zeigt, dass die modernen Beschreibungsformen von Komplexität gerade nicht in der Architektur entwickelt sind.' (Prof. Gerd Zimmermann, Weimar). Um dieses Defizit zu beheben und Architektur als eigenständige Wissenstechnik ('Technoepisteme') zu etablieren, wird ausgehend von spezifischen 'Praxis- und Diskursdefiziten' ein Theorieszenario entwickelt, mit dem und in dem Architektur sich als komplexe Wissensform verwirklicht (u.a. Komplexe Systeme, Design Sciences, Operationale Heuristik). 'Vorliegende Arbeit ist der Versuch […] die Architektur gewissermaßen wieder in den Stand zu setzen, der ihr im System des Denkens eigentlich zukommt […] Der Komplexitätsdiskurs in der Architektur ist zurück.' (Prof. Gerd Zimmermann, Weimar) N2 - 'In his study ARCHITECTURE, LANGUAGE, AND COMPLEXITY, Jörg Rainer Noennig observes that architectural thought is hampered by the inadequacy of traditional architectural concepts [...] To grasp the complex issues of today, we are in dire need of 'languaging' to come up with better tools. [...] The present study represents the first step in the direction of creating a New Organon that will conceptualize the world in terms of processes rather than things.' (Prof. Kari Jormakka, Wien) KW - Erkenntnistheorie KW - Wissenschaftsphilosophie KW - Kognitive Komplexität KW - Architekturtheorie KW - Systemtheorie KW - Heuristik KW - Komplexität KW - Architectural Theory KW - Design Science KW - Complex Systems KW - Epistemology KW - Cognition Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20071023-9946 ER - TY - THES A1 - Nour, Mohamed T1 - A Flexible Model for Incorporating Construction Product Data into Building Information Models N2 - When considering the integration and interoperability between AEC-FM software applications and construction products' data, it is essential to investigate the state-of-the-art and conduct an extensive review in the literature of both Building Information Models and electronic product catalogues. It was found that there are many reasons and key-barriers that hinder the developed solutions from being implemented. Among the reasons that are attributed to the failure of many previous research projects to achieve this integration aim are the proprietary developments of CAD vendors, the fragmented nature of construction product data i.e. commercial and technical data, the prefabrication versus on-site production, marketing strategies and brand-naming, the referencing of a product to the data of its constituents, availability of life-cycle data in a single point in time where it is needed all over the whole life-cycle of the product itself, taxonomy problems, the inability to extract search parameters from the building information model to participate in the conduction of parametric searches. Finally and most important is keeping the product data in the building information model consistent and up-to-date. Hence, it was found that there is a great potential for construction product data to be integrated to building information models by electronic means in a dynamic and extensible manner that prevents the model from getting obsolete. The study has managed to establish a solution concept that links continually updated and extensible life-cycle product data to a software independent building information model (IFC) all over the life span of the product itself. As a result, the solution concept has managed to reach a reliable building information model that is capable of overcoming the majority of the above mentioned barriers. In the meantime, the solution is capable of referencing, retrieving, updating, and merging product data at any point in time. A distributed network application that represents all the involved parties in the construction product value chain is simulated by real software tools to demonstrate the proof of concept of this research work. N2 - Die vorliegende Dissertation stellt ein flexibles und dynamisches Gebäudeinformationsmodell vor, mit dem die Produktinformationen der Bauteile erfragt und aktualisiert werden können. Dazu werden Beziehungen zwischen den Bauteilen im Gebäudeinformationsmodell und den Produktinformationen der Hersteller und Lieferanten definiert. Die Produktinformationen können über eindeutige Produktnamen und über verallgemeinerte Produktparameter identifiziert werden. Der Stand der Technik bei den digitalen Bauteilkatalogen besteht überwiegend in einer Beschreibung der Produkte in Dokumenten im HTML- oder PDF-Format. Diese Dokumente können mit Hilfe von Schlüsselwörtern durchsucht werden. Hierbei besteht das Problem, dass die Produktinformationen nicht dauerhaft den Objekten im Gebäudeinformationsmodell zuzuordnen sind. Demzufolge kann verfügbare CAD-Software die verwendeten Produkte der Bauteile nicht vollständig beschreiben. Da viele Prozesse aktuelle Informationen der Bauteilprodukte benötigen, ist eine Erweiterung vorhandener Gebäudeinformationsmodelle um diesen Aspekt erforderlich. Obwohl dies Gegenstand zahlreicher proprietärer Entwicklungen ist, ist der Austausch von Daten infolge fehlender Standardisierung nicht ohne Informationsverluste möglich. Diesem Thema widmen sich derzeit unabhängige Forschungsprojekte, in denen neue Taxonomien und Ontologien für die Beschreibung der Semantik von Bauteildaten auf Basis von XML entwickelt werden. Diese Lösungsansätze haben den Nachteil, dass die Produktinformationen der Hersteller und Lieferanten notwendigerweise in einer gemeinsamen Datenbasis gespeichert werden müssen. Die Untersuchung des Lebenszyklus von Bauwerken im Hinblick auf die Wertschöpfungskette und die Beschaffungskette ergab, dass die Informationen sowohl der Bauteile als auch der Produkte über die gesamte Lebensdauer des Bauwerks verfügbar sein müssen. Aus kaufmännischer Sicht besteht das Problem, dass die Produkte eines Herstellers unter verschiedenen Markennamen angeboten und verkauft werden. Untersuchungen haben gezeigt, dass der Markenname ein wesentlicher Faktor einer Marktstrategie ist. Auch die Zwischenhändler spielen hierbei eine wichtige Rolle – selbst dann, wenn die Geschäfte über das Internet abgewickelt werden. Bauteile haben die Besonderheit, dass sie teilweise oder ganz auf der Baustelle hergestellt werden. Dies muss bei der Konzeption eines Informationssystems, das sich mit der Wertschöpfungskette von Bauwerken befasst, beachtet werden. Eine Erkenntnis der vorliegenden Arbeit ist, dass eine parametrisierte Produktsuche nur möglich ist, wenn die Produkte eindeutige Namen und standardisierte Parameter besitzen. Dieser Lösungsansatz könnte die derzeitige Arbeitsweise in der Praxis ändern. Für die prototypische Umsetzung im Rahmen der Dissertation hat sich eine Abstützung auf das verfügbare IFC-Modell als besonders geeignet erwiesen, da dieses Modell nicht-proprietär, fachübergreifend sowie durch Eigenschaften erweiterbar ist. Der Kerngedanke des vorgestellten Lösungskonzepts besteht in der Entwicklung des OIP-Konzepts (Object Information Pack), welches eine dauerhafte und dynamische Datenquelle für Gebäudeinformationsmodelle behandelt. Die OIP ist nicht nur ein eindeutiger Produktname, sondern eine ganze Datenstruktur für Produktinformationen im Bauwesen. Die OIP besteht aus einer dreischichtigen Hierarchie, welche sich sowohl in der Struktur der Datenbasis als auch in der Struktur der Klassen widerspiegelt. Diese Struktur wird über eine Gruppe von Relationen vom OIP-Kern verwaltet. Das Format der OIP-Namen sowie die Verteilung der Daten zwischen den Beteiligten (produktunabhängige technische Daten und produktabhängige Daten der Lieferanten) sind die wesentlichen Neuerungen gegenüber den bekannten Ansätzen mit einer zentralen Datenbasis. Das in dieser Arbeit vorgestellte Lösungskonzept basiert auf einer eingehenden Betrachtung und Analyse der Beschaffungskette von Bauwerken unter Beachtung der Besonderheiten des Bauwesens. Es hat sich herausgestellt, dass das OIP-Konzept allein nicht ausreicht, um eine Brücke zwischen den Daten der Hersteller und Händler auf der einen und dem Kunden auf der anderen Seite zu schlagen. Darüber hinaus wurde eine integrierte Softwarelösung für die Umsetzung des Konzepts benötigt, die zum Zeitpunkt des Entstehens dieser Dissertation nicht verfügbar war. Daher hat der Autor Werkzeuge mit folgender Funktionalität entwickelt: Parsen von STEP-ISO-10303-P21-Dateien Interpretation der geparsten Daten in IFC2x-Java-Klassen Abbildung und Integration von Produktdaten in das IFC-Modell Instanziierung, Löschen und Änderung von Objekten Definition von Suchparametern durch den Anwender Extraktion von Suchparametern aus dem CAD/IFC-Model Durchführen von parametrisierten Suchen Bereitstellung verschiedener Arten der Visualisierung des IFC Modells Export des modifizierten IFC-Modells in Form einer STEP-P21-Datei Mit diesen Werkzeugen konnte das Konzept der Arbeit verifiziert werden. Aufgrund ihres flexiblen Entwurfs können diese Werkzeuge darüber hinaus auch bei anderen Problemstellungen im Zusammenhang mit dem IFC-Modell verwendet werden. Es handelt sich nämlich um einfache Werkzeuge, die eine Integration des IFC-Modells in andere Applikationen ermöglichen. Die Einführung des Konzepts in die Praxis erfordert die Verwaltung durch eine eigene Organisation. Die Rolle dieser OIP-Organisation und das Internetportal der Hersteller wurden ebenfalls innerhalb einer verteilten Applikation simuliert. Zur übersichtlichen Darstellung der Ergebnisse und zum Nachweis der Anwendbarkeit des Konzeptes wurden alle Werkzeuge mit einer graphischen Nutzeroberflächen ausgestattet. Schließlich möchte der Autor betonen, dass eine Übernahme eines solchen „Business Process Re-engeneering“ (BPR) Konzeptes in die industrielle Praxis nicht frei von Barrieren und Problemen ist. Aus der Literatur über Firmenkultur und Psychologie ist bekannt, dass Nutzer oft ablehnend auf die Einführung neuer Systeme reagieren, wenn diese die gewohnte Arbeitsweise in Frage stellen. Hierbei spielt es keine Rolle, ob das resultierende Ergebnis auf lange Sicht zu einer Optimierung und Reduzierung des Aufwands führt. Ein Wechsel der derzeitigen Praxis könnte jedoch erreicht werden, wenn einige innovative Unternehmen ihren Anwendern die Gelegenheit gäben, sich von den Vorteilen der neuen Arbeitsweise zu überzeugen. KW - Produktinformation KW - Bauteil KW - Informationsmodell KW - Construction Product data KW - IFC KW - BIM KW - Building Information Model Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060317-7781 ER - TY - GEN A1 - Müller, Alexander T1 - Untersuchung der Realisierbarkeit von regionalen Bädernetzwerken im Rahmen eines PPP-Modells unter Berücksichtigung von Finanzierungs-, Errichtungs- und Betreibungsaspekten als Modellprojekt N2 - Immer häufiger setzen Bund, Länder und Kommunen auf die Zusammenarbeit zwi-schen öffentlicher Hand und Privatwirtschaft. Insbesondere in den Bereichen Sport, Freizeit und Kultur sagen die kommunalen Entscheidungsträger dem Instrument PPP eine große Zukunft voraus. In der vorliegenden Diplomarbeit soll die Realisierbarkeit von PPP in einem regiona-len Bädernetzwerk untersucht werden. Da zu diesem Thema bisher keine Untersu-chung durchgeführt wurde, erfolgte einleitend in die Arbeit eine Marktübersicht, in der die geschichtliche Entwicklung des Badewesens, die heutigen Strukturen und Anforderungen an Bäder sowie eine Kategorisierung der Schwimmstätten nach An-zahl und Typus dargestellt werden. Im zweiten Kapitel wird ein Extrakt der derzeitigen und künftigen Marktgegebenhei-ten vorgenommen. Diesem liegt eine Marktabfrage nebst -auswertung zugrunde, welche bei privatrechtlich firmierten Bäderbetreibern recherchiert wurde. Im darauf folgenden dritten Kapitel werden Varianten für eine regionale Zusammen-arbeit dargelegt. Neben allgemeinen Ausführungen und individuellen Bestimmungen sind Voraussetzungen sowie Vor- und Nachteile der einzelnen Alternativen be-schrieben. Um den Leser mit dem Instrument PPP vertraut zu machen, gibt der vierte Teil eine Einführung in dieses Thema. Hierbei wird der Begriff PPP definiert, eine Abgrenzung des PPP-Inhabermodells, PPP-Konzessionsmodells und des PPP-Gesellschaftsmodells vorgenommen sowie Erläuterungen hinsichtlich rechtlicher und finanzieller Rahmenbedingungen gegeben. Abgeschlossen wird dieses Kapitel mit einer Auflistung der Vor- und Nachteile von PPP. Das fünfte Kapitel befasst sich mit der Gegenüberstellung der o.g. drei PPP-Vertragsmodelle. Vorrangig werden die Unterschiede im Risiko sowie finanzielle und rechtliche Differenzen herausgearbeitet. Betrachtet wird bspw. der Defizitausgleich, die Förderfähigkeit, das Vergabe- und Haushaltsrecht u. v. m. Die Umsetzbarkeit von PPP in einem regionalen Bädernetzwerk wird als vorletztes und damit sechstes Kapitel in dieser Diplomarbeit analysiert. Innerhalb dieses Kapi-tels werden positive Aussichten sowie Problemfelder aus der Sichtweise der Privat-wirtschaft und der öffentlichen Hand näher beleuchtet. Im siebten und abschließenden Kapitel wird ein Gesamtresümee die Arbeit abrun-den. Es kann bereits jetzt gesagt werden, dass ein Ergebnis, welches zu einer fina-len Aussage gelangt und bestimmten Projekten eine uneingeschränkte PPP-Eignung attestiert, nicht gegeben werden kann. Dafür ist jedes Projekt zu verschieden und bedarf einer individuellen Untersuchung. N2 - The German alliance, countries and communities focus more and more on the col-laboration between public authorities and private enterprises. In particular the policy makers predict the sectors sport, leisure and culture a great PPP future. In the available thesis (diploma) the feasibility is to be examined by PPP in a re-gional bath network. Car concerning this theme no investigation is accomplished until now, a market review took place as introduction. In that the historical develop-ment of the bath nature, the today's structures and requirements to baths are repre-sented as well as a categorisation of the swimming places after number and type In the second chapter an excerpt of the present and future market conditions is made. The basis of this is a market inquiry together with evaluation, which was en-quired within private law bath operators. In the following third chapter variants for a regional cooperation are stated. Apart from general remarks and individual regulations conditions as well as pro and cons of the individual alternatives are described. In order to make the reader familiar with the instrument PPP, the fourth part gives an introduction to this topic. Here the term PPP is defined, a demarcation of the PPP owner model, of the PPP concession model and of the PPP society model is made as well as explanations regarding legal and financial basic conditions. This chapter ends with a listing of the pro and cons of PPP. The fifth chapter is concerned with the confrontation of the above mentioned three PPP contract models. The differences in the risk as well as financial and legal dif-ferences are worked out with priority. Deficit reconciliation, the assignment, the promotion ability and budgetary law and so one are regarded. As next to last and thus the sixth chapter in this thesis (diploma) the negotiability of PPP in a regional bath network is analysed. Within this chapter positive prospects as well as problem fields from the aspect of the private sector and the public hand are examined In the seventh and final chapter a total summary will round off the work. Already now it can be said that a result, which leads to a final statement and certifies an unre-stricted PPP suitability cannot be given, because each project is too different and requires an individual investigation. KW - Public Private Partnership KW - PPP KW - Schwimmbad KW - Bäderwesen Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7937 ER - TY - CHAP A1 - Musial, Michal A1 - Ubysz, Andrzej A1 - Ulatowski, Piotr ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - METHOD OF CALCULATION OF INTERNAL FORCES REDISTRIBUTION AND DISLOCATIONS IN REINFORCED CONCRETE BEAMS N2 - The paper is a proposal of calculation of internal forces and dislocations in the reinforced concrete beams before and after cracking. For the ideally elastic bars transfer matrix proposed by Rakowski was applied. The effects associated with cracking were introduced by means of the Borcz's theory in the spectrally way. Numerical example was shown. The presented attitude also enables to calculate dynamic problems and those connected with the stability of the compressed and bending cracked beams and columns. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29965 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Muschalla, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - OPTIMIZATION OF WATER RESOURCES SYSTEMS USING MULTI-OBJECTIVE EVOLUTION STRATEGIES N2 - This paper deals with the development of a new multi-objective evolution strategy in combination with an integrated pollution-load and water-quality model. The optimization algorithm combines the advantages of the Non-Dominated Sorting Genetic Algorithm and Self-Adaptive Evolution Strategies. The identification of a good spread of solutions on the pareto-optimum front and the optimization of a large number of decision variables equally demands numerous simulation runs. In addition, statements with regard to the frequency of critical concentrations and peak discharges require continuous long-term simulations. Therefore, a fast operating integrated simulation model is needed providing the required precision of the results. For this purpose, a hydrological deterministic pollution-load model has been coupled with a river water-quality and a rainfall-runoff model. Wastewater treatment plants are simulated in a simplified way. The functionality of the optimization and simulation tool has been validated by analyzing a real catchment area including sewer system, WWTP, water body and natural river basin. For the optimization/rehabilitation of the urban drainage system, both innovative and approved measures have been examined and used as decision variables. As objective functions, investment costs and river water quality criteria have been used. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29953 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Eckardt, Stefan A1 - Schrader, Kai A1 - Deckner, T. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AN IMPROVED COHESIVE CRACK MODEL FOR COMBINED CRACK OPENING AND SLIDING UNDER CYCLIC LOADING N2 - The modeling of crack propagation in plain and reinforced concrete structures is still a field for many researchers. If a macroscopic description of the cohesive cracking process of concrete is applied, generally the Fictitious Crack Model is utilized, where a force transmission over micro cracks is assumed. In the most applications of this concept the cohesive model represents the relation between the normal crack opening and the normal stress, which is mostly defined as an exponential softening function, independently from the shear stresses in tangential direction. The cohesive forces are then calculated only from the normal stresses. By Carol et al. 1997 an improved model was developed using a coupled relation between the normal and shear damage based on an elasto-plastic constitutive formulation. This model is based on a hyperbolic yield surface depending on the normal and the shear stresses and on the tensile and shear strength. This model also represents the effect of shear traction induced crack opening. Due to the elasto-plastic formulation, where the inelastic crack opening is represented by plastic strains, this model is limited for applications with monotonic loading. In order to enable the application for cases with un- and reloading the existing model is extended in this study using a combined plastic-damage formulation, which enables the modeling of crack opening and crack closure. Furthermore the corresponding algorithmic implementation using a return mapping approach is presented and the model is verified by means of several numerical examples. Finally an investigation concerning the identification of the model parameters by means of neural networks is presented. In this analysis an inverse approximation of the model parameters is performed by using a given set of points of the load displacement curves as input values and the model parameters as output terms. It will be shown, that the elasto-plastic model parameters could be identified well with this approach, but require a huge number of simulations. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29933 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian A1 - Macke, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - A NATURAL NEIGHBOR BASED MOVING LEAST SQUARES APPROACH WITH INTERPOLATING WEIGHTING FUNCTION N2 - The Element-free Galerkin Method has become a very popular tool for the simulation of mechanical problems with moving boundaries. The internally applied Moving Least Squares approximation uses in general Gaussian or cubic weighting functions and has compact support. Due to the approximative character of this method the obtained shape functions do not fulfill the interpolation condition, which causes additional numerical effort for the imposition of the essential boundary conditions. The application of a singular weighting function, which leads to singular coefficient matrices at the nodes, can solve this problem, but requires a very careful placement of the integration points. Special procedures for the handling of such singular matrices were proposed in literature, which require additional numerical effort. In this paper a non-singular weighting function is presented, which leads to an exact fulfillment of the interpolation condition. This weighting function leads to regular values of the weights and the coefficient matrices in the whole interpolation domain even at the nodes. Furthermore this function gives much more stable results for varying size of the influence radius and for strongly distorted nodal arrangements than classical weighting function types. Nevertheless, for practical applications the results are similar as these obtained with the regularized weighting type presented by the authors in previous publications. Finally a new concept will be presented, which enables an efficient analysis of systems with strongly varying node density. In this concept the nodal influence domains are adapted depending on the nodal configuration by interpolating the influence radius for each direction from the distances to the natural neighbor nodes. This approach requires a Voronoi diagram of the domain, which is available in this study since Delaunay triangles are used as integration background cells. In the numerical examples it will be shown, that this method leads to a more uniform and reduced number of influencing nodes for systems with varying node density than the classical circular influence domains, which means that the small additional numerical effort for interpolating the influence radius leads to remarkable reduction of the total numerical cost in a linear analysis while obtaining similar results. For nonlinear calculations this advantage would be even more significant. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29943 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - Stochastic simulation of cracking in concrete structures using multi-parameter random fields JF - International Journal of Reliability and Safety N2 - Stochastic simulation of cracking in concrete structures using multi-parameter random fields KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2006 SP - 168 EP - 187 ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE RESPONSE SURFACE APPROACH USING ARTIFICIAL NEURAL NETWORKS AND MOVING LEAST SQUARES N2 - In engineering science the modeling and numerical analysis of complex systems and relations plays an important role. In order to realize such an investigation, for example a stochastic analysis, in a reasonable computational time, approximation procedure have been developed. A very famous approach is the response surface method, where the relation between input and output quantities is represented for example by global polynomials or local interpolation schemes as Moving Least Squares (MLS). In recent years artificial neural networks (ANN) have been applied as well for such purposes. Recently an adaptive response surface approach for reliability analyses was proposed, which is very efficient concerning the number of expensive limit state function evaluations. Due to the applied simplex interpolation the procedure is limited to small dimensions. In this paper this approach is extended for larger dimensions using combined ANN and MLS response surfaces for evaluating the adaptation criterion with only one set of joined limit state points. As adaptation criterion a combination by using the maximum difference in the conditional probabilities of failure and the maximum difference in the approximated radii is applied. Compared to response surfaces on directional samples or to plain directional sampling the failure probability can be estimated with a much smaller number of limit state points. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29922 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Misyura, E. A1 - Volkova, Viktorija ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE N2 - The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30313 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER -