TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Yoshimura, Yutaka T1 - An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps N2 - This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations. KW - Wissensmanagement KW - Stahlbau KW - Wasserkraftwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2564 ER - TY - JOUR A1 - Werner, F. A1 - Eshete, T. T1 - Grundlagen zur Methodik der Verschneidung stahlbautypischer Körper in einem CAD-System N2 - Der Effekt des praktischen Einsatzes von CAD-Systemen im Stahlbau erschöpft sich heute weitgehend in einer Verbesserung der Qualität der Planungsunterlagen und in der Verkürzung der Bearbeitungszeiten. Dabei ist bei schwierigen individuellen Konstruktionen die Einsparung an Arbeitszeit oft nicht sehr markant gegenüber einer traditionellen Arbeitsweise. Die dreidimensionale Erfassung, Speicherung und Verarbeitung von Konstruktionsdaten im Rechner verlangt neben größeren Rechenleistungen neue Verfahren für die Behandlung dieser Daten. Die Möglichkeiten der Automatisierung stahlbautypischer Produktionsvorgänge und einer variablen, computergestützten Planung erfordern wissenschaftlich-technische Betrachtungen des Gesamtproblems. Ausgehend von den Anforderungen des Stahlbaus wird ein neues dreidimensionales Volumenmodell für den rechnergestützten Entwurf und die Konstruktion erarbeitet. Es werden grundlegende Methoden zur Problembehandlung aufgezeigt. Die Methodik basiert im wesentlichen auf der Methode der Inzidenz-Matrizen, um die Beziehungen zwischen topologischen und geometrischen Informationen eines Körpers darzustellen. Die Ermittlung der lokalen Mannigfaltigkeiten wird mit dem Euler-Polyedersatz verglichen und an Beispielen demonstriert. Eine neue Methode zur Ermittlung der lokalen Mannigfaltigkeiten wird dargestellt. Stahlbauspezifische Konstruktionen werden erzeugt und ihre Gestalt nach Anforderungen verändert. Im besonderen werden stahlbauspezifische Ausklinkungen und Verschneidungen erarbeitet und an Beispielen präsentiert. KW - Stahlbau KW - CAD KW - Dreidimensionales Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4601 ER - TY - JOUR A1 - Kicinger, Rafal A1 - Arciszewski, Tomasz A1 - De Jong, Kenneth T1 - Distributed Evolutionary Design: Island-Model-based Optimization of Steel Skeleton Structures in Tall Buildings N2 - This paper presents results of a study on distributed, or parallel, evolutionary computation in the topological design of steel structural systems in tall buildings. It describes results of extensive experimental research on various parallel evolutionary architectures applied to a complex structural design problem. The experiments were conducted using Inventor 2003, a networkbased evolutionary design support tool developed at George Mason University. First, a general introduction to evolutionary computation is provided with an emphasis on recent developments in parallel evolutionary architectures. Next, a discussion of conceptual design of steel structural systems in tall buildings is presented. Further, Inventor 2003 is briefly introduced as well as its design representation and evolutionary computation characteristics. Next, the results obtained from systematic design experiments conducted with Inventor 2003 are discussed. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems in tall buildings during a distributed evolutionary design process as well as to compare efficiency and effectiveness of various parallel evolutionary architectures with the traditional evolutionary design approaches. Two connectivity topologies (ring topology and fully-connected topology) have been investigated for four populations of structural designs evolving in parallel and using various migration strategies. Also, results of the initial sensitivity studies are reported in which two ways of initializing distributed evolutionary design processes were investigated, using either arbitrarily selected designs as initial parents or randomly generated ones. Finally, initial research conclusions are presented. KW - Mehragentensystem KW - Lernendes System KW - Stahlbau KW - Skelettbau KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2195 ER - TY - JOUR A1 - Holtzhauer, Eric A1 - Saal, Helmut T1 - Product modelling in the steel construction domain N2 - The complexity of the relationships between the actors of a building project requires high efficiency in communication. Among other things, data sharing is crucial. The exchange of data is made possible by interfaces between expert programs, which rely on product models. The latter are neutral standards with formal definitions of building objects and their attributes. This paper deals with the state of the art and the research activities concerning product models in the steel construction domain and the advantages provided by this technology for the sector. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Stahlbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2415 ER - TY - CHAP A1 - Bubner, Andre A1 - Thierfelder, Jan T1 - Austausch von planungsrelevanten Daten im Stahlbau N2 - Datenaustausch, Daten resp. Produktdatenmodelle sind seit mehreren Jahren Themen in der Forschung. Verschiedene Forschungsprojekte und Initiativen diverser Firmen führten zu bereichsübergreifenden Ansätzen wie IFC und verschiedenen STEP-AP´s. Speziell im Stahlbau sind die Projekte >Produktschnittstelle Stahlbau< und >CIMsteel< entwickelt, weiterentwickelt und überarbeitet worden. Als Weiterentwicklung der bisher existierenden Austauschformate versuchen neuere Ansätze den Nutzen über die reine Datenübermittlung hinaus zu erweitern. So integrieren diese Lösungsvorschläge Aspekte der Kommunikation, der Zusammenarbeit und des Managements. Des weiteren übernehmen sie Aufgaben der Daten- und Modellverwaltung. Somit erfolgt eine digitale Abbildung unter Einbezug sämtlicher ermittelter Daten. Resultierend aus den besonderen Randbedingungen im Bauwesen, wird ein Bauwerksmodell aus untereinander in Beziehung gesetzten Domänenmodellen aufgebaut KW - Datenaustausch KW - CAD KW - Stahlbau Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6146 ER -