TY - CHAP A1 - Tonn, Christian A1 - Wolkowicz, Christian A1 - Thurow, Torsten T1 - Plausibility in Architectural Design - DOMEdesign – Software Support for the formal shaping and architect-oriented design of shell structures N2 - Complex gridshell structures used in architecturally ambitious constructions remain as appealing as ever in the public realm. This paper describes the theory and approach behind the software realisation of a tool which helps in finding the affine self-weight geometry of gridshell structures. The software tool DOMEdesign supports the formal design process of lattice and grid shell structures based upon the laws of physics. The computer-aided simulation of suspension models is used to derive structurally favourable forms for domes and arches subject to compression load, based upon the input of simple architectonic parameters. Irregular plans, three-dimensional topography, a choice different kinds of shell lattice structures and the desired height of the dome are examples of design parameters which can be used to modify the architectural design. The provision of data export formats for structural dimensioning and visualisation software enables engineers and planners to use the data in future planning and to communicate the design to the client. KW - Architektur KW - Verteiltes System KW - Schale Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1812 ER - TY - CHAP A1 - Thurow, Torsten A1 - Donath, Dirk A1 - Petzold, Frank T1 - Vision eines mitwachsenden Geometriemodells für die computergestützte Bauaufnahme N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells für das computergestützte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale Übersicht zu verlieren oder entsprechende räumliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterstützt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberflächen KW - Bauaufnahme KW - CAD KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3655 ER - TY - CHAP A1 - Thurow, Torsten A1 - Donath, Dirk T1 - A vision of an adaptive geometry model for computer-assisted building surveying N2 - The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment. KW - Architektur KW - Verteiltes System KW - Bauaufnahme Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1722 ER - TY - CHAP A1 - Theiler, Michael A1 - Tauscher, Eike A1 - Tulke, Jan A1 - Riedel, Thomas ED - von Both, Petra ED - Koch, Volker T1 - Visualisierung von IFC-Objekten mittels Java3D T2 - Forum Bauinformatik 2009 N2 - Die Planung komplexer Bauwerke erfolgt zunehmend mit rechnergestützten Planungswerkzeugen, die den Export von Bauwerksinformationen im STEP-Format auf Grundlage der Industry Foundation Classes (IFC) ermöglichen. Durch die Verfügbarkeit dieser Schnittstelle ist es möglich, Bauwerksinformationen für eine weiterführende applikationsübergreifende Verarbeitung bereitzustellen. Ein großer Teil der bereitgestellten Informationen bezieht sich auf die geometrische Beschreibung der einzelnen Bauteile. Um den am Bauprozess Beteiligten eine optimale Auswertung und Analyse der Bauwerksinformationen zu ermöglichen, ist deren Visualisierung unumgänglich. Das IFC-Modell stellt diese Daten mit Hilfe verschiedener Geometriemodelle bereit. Der vorliegende Beitrag beschreibt die Visualisierung von IFC-Objekten mittels Java3D. Er beschränkt sich dabei auf die Darstellung von Objekten, deren Geometrie mittels Boundary Representation (Brep) oder Surface-Model-Repräsentation beschrieben wird. KW - IFC KW - Brep KW - STEP KW - Visualisierung KW - Schnittstelle Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130107-18149 SN - 978-3-86644-396-9 SP - 149 EP - 159 PB - Universitätsverlag CY - Karlsruhe ER - TY - CHAP A1 - Theiler, Michael A1 - Tauscher, Eike A1 - Tulke, Jan A1 - Riedel, Thomas ED - Krämer, Torsten T1 - Boolesche Operationen für die Visualisierung von IFC-Gebäudemodellen T2 - Forum Bauinformatik 2010 N2 - Die Planung von komplexen Bauwerken erfolgt zunehmend mit Planungswerkzeugen, die den Export von Bauwerksinformationen im STEP-Format auf Grundlage der IFC (Industry Foundation Classes) erlauben. Durch die Verfügbarkeit dieser Schnittstelle ist es möglich, Bauwerksinformationen für die weiterführende Verarbeitung zu verwenden. Zur Visualisierung der geometrischen Daten stehen innerhalb der IFC verschiedene geometrische Modelle für die Darstellung von Bauteilen zur Verfügung. Unter anderem werden für das „Ausschneiden“ von Öffnungen aus Bauteilen (z.B. für Fenster und Türen) geometrische boolesche Operationen benötigt. Gegenstand des Beitrags ist die Vorstellung eines Algorithmus zur Berechnung von booleschen Operationen auf Basis eines triangulierten B-Rep (Boundary Representation) Modells nach HUBBARD (1990). Da innerhalb von IFC-Gebäudemodellen Bauteile oft das Resultat mehrerer boolescher Operationen sind (z.B. um mehrere Fensteröffnungen von einer gegebenen Wand abzuziehen), wurde der Algorithmus von Hubbard angepasst, sodass mehrere boolesche Operationen gleichzeitig berechnet werden können. Durch diese Optimierung wird eine deutliche Reduzierung der benötigten Berechnungen und somit der Rechenzeit erreicht. KW - IFC KW - Boolesche Operationen KW - Visualisierung KW - Hubbard KW - Laidlaw Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130107-18151 SN - 978-3-8322-9456-4 SP - 251 EP - 258 PB - Shaker Verlag CY - Aachen ER - TY - CHAP A1 - Taha, M. M. Reda A1 - Sherif, Alaa A1 - Hegger, Josef T1 - A nouvelle approach for predicting the shear cracking angle in RC and PC beams using artificial neural networks N2 - The truss model for predicting shear resistance of reinforced concrete beams has usually been criticized because of its underestimation of the concrete shear strength especially for beams with low shear reinforcement. Two challengers are commonly encountered in any truss model and are responsible for its inaccurate shear strength prediction. First: the cracking angle is usually assumed empirically and second the shear contribution of the arching action is usually neglected. This research introduces a nouvelle approach, by using Artificial Neural Network (ANN) for accurately evaluating the shear cracking angle of reinforced and prestressed concrete beams. The model inputs include the beam geometry, concrete strength, the shear reinforcement ratio and the prestressing stress if any. ... KW - Neuronales Netz KW - Wasserbau KW - Scherung KW - Rissbildung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1071 ER - TY - CHAP A1 - Swaddiwudhipong, Somsak A1 - Tho, Kee Kiat A1 - Liu, Zishun T1 - Material characterization using artificial neural network N2 - Indentation experiments have been carried out over the past century to determine hardness of materials. Modern indentation machines have the capability to continuously monitor load and displacement to high precision and accuracy. In recent years, research interests have focussed on methods to extract material properties from indentation load-displacement curves. Analytical methods to interpret the indentation load-displacement curves are difficult to formulate due to material and geometric nonlinearities as well as complex contact interactions. In the present study, an artificial neural network model was constructed for interpretation of indentation load-displacement curves. Large strain-large deformation finite element analyses were first carried out to simulate indentation experiments. The data from finite element analyses were then used to train the artificial neural network model. The artificial neural network model was able to accurately determine the material properties when presented with load-displacement curves which were not used in the training process. The proposed artificial neural network model is robust and directly relates the characteristics of the indentation loaddisplacement curve to the elasto-plastic material properties. KW - Neuronales Netz KW - Wasserbau KW - Werkstoffprüfung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1550 ER - TY - CHAP A1 - Suzuki, Aketo T1 - Numerical Analysis for Prediction as to Influence of Digging a Tunnel on Groundwater N2 - This paper describes monitoring of the in-valley discharge and underground water level at the place where the tunnel will be constructed and also, the numerical analysis for prediction applying the Tank Model and Linear Filter Method to calculate the prediction. The application of these analyses has actually allowed the change of underground water level to be grasped and more effective information system to be established by comparing the real-time monitoring data with the real-time calculation of prediction. KW - Mobile Computing KW - Funknetz KW - Tunnelbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1133 ER - TY - CHAP A1 - Stanke, Gerd A1 - Hoske, P. A1 - Damme, D. T1 - Objektiviertes Beurteilungsverfahren für Sichtbeton mittels automatisierter Bildverarbeitung unter Berücksichtigung von Beleuchtungsvariationen N2 - Es wird ein Verfahren vorgestellt, das erlaubt, die Vermessung von Porengrößen in Sichtbetonflächen sowie die Beurteilung von Farbeindrücken automatisiert durchzuführen. Subjektive Einflüsse bei der Bewertung werden ausgeschlossen, gleichzeitig werden Einsparungseffekte von 80% und mehr gegenüber Handauszählungen von Lunkern nachgewiesen. Die verwendeten Techniken sind ein spezieller Markierungsrahmen, eine hochauflösende Digitalkamera und spezielle Bildanalyseprozeduren. Letztere leisten die notwendigen Vorverarbeitungsfunktionen, wie geometrische Entzerrung, Kalibrierung sowie einen Helligkeitsausgleich, und nehmen die durchzuführenden Bewertungen vor. Das sind Porengrößen- und verteilungsanalyse sowie Farbvergleiche mit definierten Normalen zur Beurteilung von Farbhomogenitäten über den zu analysierenden Sichtbetonflächen. Die Ergebnisprotokollierung erfolgt sowohl bildlich als auch datentechnisch, letzteres z. B. in einem Excelfile. Die Durchgängigkeit des Verfahrens wird an einer Reihe von in Sichtbetonbauweise ausgeführten Bauten veranschaulicht, z. B. dem Bundeskanzleramt und dem Hörsaalzentrum der TU-Dresden. Wesentliche Einflussparameter wie Beleuchtungsgeometrie oder Helligkeitsschwellen werden diskutiert und Vergleiche zu durchgeführten Handmessungen gezogen. Der vorgestellte Ansatz ist in weiterer Forschung anwendungsorientiert aufzubereiten, vergleichende Untersuchungen zu durch Experten durchgeführten Messungen sind zu Validierungszwecken vorzunehmen. Der Ansatz kann einen Beitrag zu Normungsfragen liefern. Seine Nutzbarkeit ist auch für spezielle Bereiche der Entwicklung von Betonmischtechnologien oder in der Fertigelementefertigung gegeben. Im Beitrag sind die relevanten Verfahrensschritte bildlich und in tabellarischer Form untersetzt. KW - Sichtbeton KW - Beurteilung KW - Bildverarbeitung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3647 ER - TY - CHAP A1 - Sotskov, Yuri N. T1 - Stability of an optimal schedule for a flow-shop problem with two jobs N2 - The problem F|n=2|F is to minimize the given objective function F(C1,m, C2,m) of completion times Ci,m of two jobs i Î J={1, 2} processed on m machines M={1, 2, …, m}. Both jobs have the same technological route through m machines. Processing time ti,k of job iÎ J on machine kÎ M is known. Operation preemptions are not allowed. Let R2m be space of non-negative 2m-dimensional real vectors t=(t1,1,…, t1,m, t2,1,…, t2,m) with Chebyshev’s distance d(t, t*). To solve problem F|n=2|F, we can use the geometric algorithm, which includes the following steps: 1) construct digraph (V, A) for problem F|n=2|F and find so-called border vertices in (V, A); 2) construct the set of trajectories corresponding to the shortest paths Rt in digraph (V, A) from the origin vertex to each of the border vertices; 3) find an optimal path in the set Rt that represents a schedule with minimal value of the objective function F. Let path tu Î Rt be optimal for the problem F|n=2|F with operation processing times defined by vector t. If for any small positive real number e > 0 there exists vector t*Î R2m such that d(t, t*) = e and path tu is not optimal for the problem F|n=2|F with operation processing times defined by vector t*, then optimality of path tu is not stable. The main result of the paper is the proof of necessary and sufficient conditions for optimality stability of path tu. If objective function F is continuous non-decreasing (e.g., makespan, total completion time, maximal lateness or total tardiness), then to test whether optimality of the path tu Î Rt is stable takes O(m log m) time. KW - Ablaufplanung KW - Reihenfolgeproblem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3690 ER - TY - CHAP A1 - Soibelman, Lucio A1 - O'Brien, William A1 - Elvin, George T1 - Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design N2 - The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1948 ER - TY - CHAP A1 - Soares, Maria Joana A1 - Dahlke, S. A1 - Lindemann, M. T1 - A Wavelet Based Numerical Method for Nonlinear Partial Differential Equations N2 - This paper is concerned with the numerical treatment of quasilinear elliptic partial differential equations. In order to solve the given equation we propose to use a Galerkin approach, but, in contrast to conventional finite element discretizations, we work with trial spaces that, not only exhibit the usual approximation and good localization properties, but, in addition, lead to expansions of any element in the underlying Hilbert spaces in terms in multiscale or wavelet bases with certain stability properties. Specifically, we select as trial spaces a nested sequence of spaces from an appropriate biorthogonal multiscale analysis. This gives rise to a nonlinear discretized system. To overcome the problems of nonlinearity, we make use of the machinery of interpolating wavelets to obtain knot oriented quadrature rules. Finally, Newton's method is applied to approximate the solution in the given ansatz space. The results of some numerical experiments with different biorthogonal systems, confirming the applicability of our scheme, are presented. KW - Nichtlineare partielle Differentialgleichung KW - Numerisches Verfahren KW - Wavelet Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3631 ER - TY - CHAP A1 - Smarsly, Kay A1 - Tauscher, Eike ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - IFC-BASED MONITORING INFORMATION MODELING FOR DATA MANAGEMENT IN STRUCTURAL HEALTH MONITORING T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - This conceptual paper discusses opportunities and challenges towards the digital representation of structural health monitoring systems using the Industry Foundation Classes (IFC) standard. State-of-the-art sensor nodes, collecting structural and environmental data from civil infrastructure systems, are capable of processing and analyzing the data sets directly on-board the nodes. Structural health monitoring (SHM) based on sensor nodes that possess so called “on-chip intelligence” is, in this study, referred to as “intelligent SHM”, and the infrastructure system being equipped with an intelligent SHM system is referred to as “intelligent infrastructure”. Although intelligent SHM will continue to grow, it is not possible, on a well-defined formalism, to digitally represent information about sensors, about the overall SHM system, and about the monitoring strategies being implemented (“monitoring-related information”). Based on a review of available SHM regulations and guidelines as well as existing sensor models and sensor modeling languages, this conceptual paper investigates how to digitally represent monitoring-related information in a semantic model. With the Industry Foundation Classes, there exists an open standard for the digital representation of building information; however, it is not possible to represent monitoring-related information using the IFC object model. This paper proposes a conceptual approach for extending the current IFC object model in order to include monitoring-related information. Taking civil infrastructure systems as an illustrative example, it becomes possible to adequately represent, process, and exchange monitoring-related information throughout the whole life cycle of civil infrastructure systems, which is referred to as monitoring information modeling (MIM). However, since this paper is conceptual, additional research efforts are required to further investigate, implement, and validate the proposed concepts and methods. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28237 SN - 1611-4086 ER - TY - CHAP A1 - Skrinar, Matjaz T1 - A simple FEM Beam Element with an Arbitrary Number of Cracks N2 - To fulfil safety requirements the changes in the static and/or dynamic behaviour of the structure must be analysed with great care. These changes are often caused by local reduction of the stiffness of the structure caused by the irregularities in the structure, as for example cracks. In simple structures such analysis can be performed directly, by solving equations of motion, but for more complex structures a different approach, usually numerical, must be applied. The problem of crack implementation into the structure behaviour has been studied by many authors who have usually modelled the crack as a massless rotational spring of suitable stiffness placed at the beam at the location where the crack occurs. Recently, the numerical procedure for the computation of the stiffness matrix for a beam element with a single transverse crack has been replaced with the element stiffness matrix written in fully symbolic form. A detailed comparison of the results obtained by using 200 2D finite elements with those obtained with a single cracked beam element has confirmed the usefulness of such element. KW - Finite-Elemente-Methode KW - Rissbildung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4287 ER - TY - CHAP A1 - Schönberger, Karsten T1 - IuK bei der Steuerung von Instandsetzungsprozessen in der Immobilienwirtschaft : Projektplanung und Ressourceneinsatz N2 - Die Situation in der Immobilienwirtschaft hat sich in den letzten Jahren grundlegend verändert. Die Neubauaktivitäten in ganz Deutschland sind deutlich zurückgegangen. Das Bauen im Bestand mit den Tätigkeitsfeldern der Renovierung, Modernisierung und Instandsetzung rückt daher in den Mittelpunkt der Aktivitäten. Laut Bundesarbeitskreis Altbauerneuerungen werden im nächsten Jahr 74 Prozent des gesamten Bauvolumens auf die Modernisierung von alten Häusern entfallen, der Anteil der Neubaumaßnahmen geht auf 26 Prozent zurück. Dies gilt nicht nur für Wohn-, sondern auch für Gewerbeimmobilien. Die anhaltende Rezession und die Entzauberung der New Economy ziehen in diesem Bereich Leerstände und fallende Mieten nach sich. Auch die Wohnungswirtschaft hat vor allem in den neuen Ländern mit Leerständen zu kämpfen. Diese Tatsache zwingt Immobilienbetreiber zunehmend dazu, Methoden zu ergreifen und Werkzeuge einzusetzen, die die Effizienz im eigenen Unternehmen steigern. Die Aufgabenstellung lautet: Mehr Sanierungsprojekte in der selben Zeit abwickeln. Dies setzt eine prozessorientierte Vorgehensweise und unterstützende Werkzeuge voraus. Mit dem baucommunicator wurde ein Werkzeug entwickelt, dass es dem Gebäudemanager ermöglicht, bei der Abwicklung von Bau- und Sanierungsmaßnahmen im Aufgabenfeld der Koordination dieser Aufgabenstellung zu entsprechen. Die Kernfunktionen der Software sind das Termin-, Kosten und Qualitätsmanagement bei der Abwicklung von Bauprozessen. Die unternehmensübergreifende Konzeption erlaubt sowohl dem Auftraggeber, wie auch den ausführenden Betrieben den Zugriff auf die zentral abgelegten Projektinformationen. Die Workflow-Funktionalität des baucommunicator führt zu einer Reduktion der Prozessaktivitäten. Dadurch werden Kosten eingespart und die Ausführungsqualität gesteigert. KW - Immobilienwirtschaft KW - Bauvorhaben KW - Management KW - Software Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3628 ER - TY - CHAP A1 - Schutte, Gerrit T1 - Zur Ermittlung von Spannungen am Rand eines elastischen Kontinuums N2 - Für den Entwurf von Ingenieurbauten ist eine zuverlässige Prognose über den Spannungsverlauf im Bauwerk und auf dessen Rand von großer Bedeutung. Eine geschlossene Lösung der elastischen Bestimmungsgleichungen des Bauwerks ist in der Regel nicht verfügbar. Es wird daher unter Verwendung der Methode der gewichteten Reste eine schwache Form der Gleichungen abgeleitet, die zu einem gemischten Arbeitsprinzip führt. Das zugehörige Finite-Elemente-Modell erlaubt es Spannungen am Rand des Bauwerks zu ermitteln, die im Gleichgewicht zu den angreifenden Lasten stehen. KW - Kontinuum KW - Elastizitätstheorie KW - Randspannung KW - Finite-Elemente-Methode Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6135 ER - TY - CHAP A1 - Schultmann, Frank T1 - Projektplanungsmodelle und -methoden für den Rückbau von Bauwerken N2 - Vor dem Hintergrund einer sich verschärfenden Umweltgesetzgebung sowie der Erkenntnis, dass Bauabfälle sich grundsätzlich für eine Stoffkreislaufführung eignen, hat der Rückbau von Bauwerken in den letzten Jahren verstärkt an Bedeutung gewonnen. Aufgrund oftmals strenger Zeit- und Kostenvorgaben für einen Rückbau, begrenzter Verfügbarkeit von Personal und Betriebsmitteln, einer weitgehenden Unikatfertigung sowie wechselnder Standorte kommt dabei der projektorientierten Planung von Maßnahmen auf der Baustelle große Bedeutung zu. Im Rahmen des Beitrages werden Ansätze zur Modellierung und Lösung der sich hieraus ergebenden Probleme zur Planung und Optimierung von (Rück-) Bauabläufen unter Verwendung von Projektplanungsmodellen und -methoden vorgestellt. Hierbei werden neben betriebswirtschaftlichen auch umweltrelevante sowie technische Fragestellungen im Zusammenhang mit der Planung von Rückbauprojekten aufgegriffen. Eine Anwendung der Planungsansätze auf reale Gebäude zeigt, dass sich durch Kombination von Gebäuderückbau und Aufbereitungstechnik eine Qualitätsverbesserung von Recyclingbaustoffen erzielen lässt. Zur Umsetzung der hierzu erforderlichen Maßnahmen werden unter Berücksichtigung individueller abfallwirtschaftlicher Rahmenbedingungen der jeweiligen Planungsregion, gebäude- und baustellenbezogener Besonderheiten, technischer sowie kapazitiver Restriktionen Ablaufpläne für den Gebäuderückbau berechnet. Die für unterschiedliche Planungsregionen vorgenommenen Modellrechnungen weisen nach, dass sich die Demontage von Gebäuden gegenüber einem konventionellen Gebäudeabbruch unter bestimmten Rahmenbedingungen bereits wirtschaftlich vorteilhaft realisieren lässt. Abgerundet wird der Beitrag durch einen Ausblick auf Möglichkeiten einer Realisierung komplexer Bauabläufe auch unter strengen Zeitvorgaben sowie bei begrenzten Platzverhältnissen mit Hilfe fertigungssynchroner Ressourceneinsatzplanung sowie auf die Berücksichtigung von Unsicherheiten in der Planung und Ausführung von Rückbauprojekten. KW - Bauwerk KW - Demontage KW - Bauplanung KW - Bauablauf KW - Stoffkreislauf Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-162 ER - TY - CHAP A1 - Schroeder, P. T1 - Ein stochastisches Modell zur Berechnung von Böeneinwirkungen auf Brückenbauwerke N2 - Zur Berechnung der Böeneinwirkungen auf ein Brückenbauwerk wird ein stochastisches Modell vorgestellt. Die Windkraft aus der Böenbelastung wird dabei als systemunabhängige Luftkraft betrachtet welche in mathematischer Hinsicht dadurch gekennzeichnet ist, daß die aeroelastischen Bewegungsdifferentialgleichungen inhomogener Natur sind und der Bewegungsablauf den Charakter einer erzwungenen abklingenden Schwingung hat. Ausgehend von den nicht linearen partiellen Differentialgleichungen für Verschiebung und Torsion wird mittels der Galerkin Prozedur ein System von totalen Differentialgleichungen abgeleitet. Die äußeren Luftkräfte werden als gefilterter Poissonprozess von Dirac Impulsen dargestellt. Zur Berechnung der statistischen Momente des Differentialgleichungssystem wird die Itô'sche Differentialformel erweitert und in ein System von algebraischen nicht linearen Gleichungen transformiert. Diese dienen zur Berechnung des Momentenverlaufs für den stationären Anteil des stochastischen Prozesses. Der Abschluß des so erhaltenen nicht linearen Gleichungssystems erfolgt über die Methode der Kumulantenabschlußtechnik. KW - Brücke KW - Windlast KW - Stochastisches Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4409 ER - TY - CHAP A1 - Schoof, Jochen T1 - Kommunizierende Genetische Algorithmen: Durch Evolution zur Kooperation N2 - Die Kooperation zwischen Menschen und Computern gewinnt in zahlreichen Problemstellungen mehr und mehr an Bedeutung. Ein wesentlicher Grund hierfür ist die ständig wachsende Komplexität relevanter Problemstellungen. Dadurch bedingt sind weder der Mensch noch der Computer alleine in der Lage, zufriedenstellende Lösungen zu entwickeln. Die Kombination der individuellen Fähigkeiten hat sich in vielen Bereichen als gewinnbringend erwiesen. Genetische Algorithmen (GA) als Repräsentanten der >Evolutionary Computation< stellen einen Ansatz zur Lösung hochkomplexer Optimierungsaufgaben dar, der sich an den Vorgängen der Evolution orientiert. Im Gegensatz zu vielen anderen Optimierungsverfahren bringen sie einige Eigenarten mit, die kooperative Erweiterungen einfach und erfolg-versprechend machen. Der vorgestellte kommunizierende Genetische Algorithmus kombiniert die Vorteile der GA mit der Fähigkeit zur Kooperation. Es gelingt bei seiner Verwendung, gute externe Vorschläge aufzunehmen, während schlechte Vorschläge keinerlei negative Auswirkungen zeigen. Diese Robustheit gegen Irrtümer und Fehleingaben macht den KGA zu einer idealen Basis für Programme zur kooperativen Problemlösung. KW - Mensch-Maschine-Kommunikation KW - Genetischer Algorithmus Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6123 ER - TY - CHAP A1 - Schnellenbach-Held, Martina A1 - Denk, Heiko A1 - Geibig, Oliver T1 - SiReAM - An Agent Based Virtual Marketplace for AEC-Bidding N2 - Today´s procedures for the awarding of public construction performance contracts are mainly paper-based. Although the usage of electronic means is permitted in the VOB, the regulations are not sufficient yet. Especially software agents within the AEC-bidding process were not considered at all. The acceptance of an agent-based virtual marketplace for AEC-bidding depends on a reliable and trustworthy public key infrastructure according to the (German) digital signature act. Only if confidentiality, integrity, non-repudiation, and authentication are provided reliably, users will assign sensitive business processes like public tendering procedures to software agents. The development of a secure agent-based virtual marketplace for AEC-bidding according to legal regulations is an entirely new approach from a technical as well as from a legal point of view. The objective of this research project is the development of intelligent software-agents which are able to legally call for bids, to calculate proposals, and to award the successful bidder. KW - Ausschreibung KW - Virtuelles Unternehmen KW - Marketing Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3611 ER - TY - CHAP A1 - Schneider, Mike T1 - Radio Frequency Identification (RFID) Technology and its Applications in the Commercial Construction Industry N2 - This paper is a report of Radio Frequency Identification (RFID) technology and its potential applications in the commercial construction industry. RFID technology offers wireless communication between RFID tags and readers with non line-of-sight readability. These fundamental properties eliminate manual data entry and introduce the potential for automated processes to increase project productivity, construction safety, and project cost efficiency. Construction contractors, owners, and material suppliers that believe technology can further develop methods and processes in construction should feel obligated to participate in RFID studies for the advancement of the construction industry as a whole. KW - RFID KW - Automatische Identifikation KW - Materialflusssteuerung KW - Bauindustrie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1061 ER - TY - CHAP A1 - Schmutzler, Bernd T1 - Ein Algorithmus zur Lösung von Tourenproblemen mit Zeitrestriktionen und inhomogenem Fahrzeugpark N2 - Es wird ein Algorithmus vorgestellt, der auf Tourenprobleme mit verschiedenen Restriktionen anwendbar ist. Zum einen können sowohl die Aufträge der Kunden als auch die Fahrzeuge mit Zeitrestriktionen in Form eines oder mehrerer Zeitfenster versehen sein. Zum anderen stehen auszuliefernde Waren nur in gewissen zeitabhängigen Stückzahlen zur Verfügung. Die vorhandenen Fahrzeuge besitzen hinsichtlich Kapazität und Geschwindigkeit unterschiedliche Eigenschaften, wobei von den Kunden gewisse Fahrzeugtypen ausgeschlossen werden können. Die Aufträge werden zunächst hinsichtlich örtlichem und zeitlichem Abstand in Cluster unterteilt. Den Clustern werden auf der Basis von Bewertungen Fahrzeuge zugeordnet, mit denen Touren innerhalb der Cluster erzeugt werden. Das Aufstellen der Touren erfolgt mittels eines Savingsverfahrens, bei dem das Saving aus einer örtlichen und einer zeitlichen Komponente besteht. Der Algorithmus läßt sich über eine Vielzahl an Parametern steuern. KW - Transportproblem KW - Zeitrestriktion Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3601 ER - TY - CHAP A1 - Schley, Frank A1 - Mejstrik, Marcus A1 - Holz, K.-Peter T1 - Network Based Co-operation Platform for Geotechnical Engineering N2 - This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Geotechnik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1431 ER - TY - CHAP A1 - Schlegel, Roger A1 - Rautenstrauch, Karl T1 - Numerische Simulation von Mauerwerk als Kontinuum N2 - Im vorliegenden Beitrag wird ein in das FE-Programmsystem ANSYS implementiertes elastoplastisches Berechnungsmodell zur nichtlinearen, räumlichen Untersuchung von Mauerwerkstrukturen vorgestellt. Die Modellierung des heterogenen Baustoffs Mauerwerk erfolgt mit Hilfe eines verschmierten Ersatzkontinuums. Das anisotrope Materialverhalten wird sowohl hinsichtlich der Spannungs-Dehnungsbeziehung als auch bei der Beschreibung der Festigkeit berücksichtigt. Durch die Verwendung einer zusammengesetzten Fließbedingung ist es möglich, das Versagen der einzelnen Mauerwerkkomponenten Stein und Mörtelfugen und des Verbundes zu berücksichtigen. Dadurch ist die Anwendbarkeit des Modells für mehrere Mauerwerksarten gegeben. Die hierfür verwendeten Materialparameter sind aus einfachen Kleinkörperversuchen bestimmbar oder innerhalb gewisser Grenzen aus empirischen Formeln berechenbar. Die notwendige Beschränkung der Anzahl der Materialparameter sichert die praktische Anwendbarkeit des entwickelten Berechnungsmodells. Die numerische Umsetzung des hier verwendeten impliziten Berechnungsverfahrens lässt sich in eine lokale und eine globale Iterationsebene gliedern. Die lokale Iteration am Integrationspunkt dient der Spannungsrückführung. Dabei sind die Besonderheiten der Verarbeitung mehrflächiger Fließfiguren zu beachten. Die globale Iteration auf Systemebene sichert die Umlagerung des Residuums. Mit der Nachrechnung von Versuchsergebnissen soll das entwickelte Modell verifiziert und seine physikalische Leistungsfähigkeit eingeschätzt werden. KW - Mauerwerk KW - Modellierung KW - Elastoplastizität KW - Finite-Elemente-Methode KW - ANSYS KW - Zusammengesetzte Fließbedingung KW - Kontinuum Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6106 ER - TY - CHAP A1 - Schink, Claus-Jürgen A1 - Koch, Volker T1 - Interdisciplinary Cooperation Modules in Mobile Networks N2 - The contribution describes the didactical integration of wireless access networks for the campus of the University of Karlsruhe in the education of architects and engineers. It focuses on the development of an interdisciplinary communication network to encourage and promote the communication and collaboration between students. The project assumes that significant learning progresses in net-based learning scenarios are based upon the synchronous and asynchronous cooperation between the students themselves. The remote cooperation across borders of disciplines makes high demands on capacity in communicating and cooperating of the involved persons as well as on the supporting tools. Therefore, the collective acquisition of knowledge and cooperation has to be trained intensively during the studies. Based on the design and project oriented cooperation platform netzentwurf.de the authors developed the tools “Jobadmin“ to administrate multidisciplinary workgroups, the “Swarm Knowledge Catalogue“ to collect and store knowledge and “LivingCampus“, an instrument providing basic services for dynamic communication. KW - Architektur KW - Verteiltes System KW - Mobile Computing KW - Rechnernetz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1788 ER - TY - CHAP A1 - Scherer, Raimar J. A1 - Keller, Martin T1 - Modellbasierte Prozesskoordination für das virtueller Planungsteams N2 - >Virtual Organizations<, >Virtual Enterprises< und >Smart Organizations< werden immer häufiger als zukünftige Geschäftsform für des Bauwesens und insbesondere der Bauplanung gesehen. Ziel dieser Organisationsformen ist es, eine temporäre geschäftliche Zusammenarbeit zur Erschließung neuer Geschäftsfelder aufzubauen, ausgehend von einer strategischen Geschäftsverbindung. Insbesondere für kleine Planungsbüros können sich hieraus Möglichkeiten zur Durchführung größerer Projekte eröffnen, indem notwendige Ressourcen, wie z.B. Fachingenieure, jeder Zeit flexibel integriert werden können. Neben dem Auftreten als Projektmanager besteht für die Planungsbüros auch die Möglichkeit Spezialwissen sowie nicht benötigte Ressourcen in andere Projekte zu integrieren. Ziel ist es dabei, eine kontinuierliche Auslastung der Mitarbeiter sicherzustellen. Durch die Nutzung einer geeigneten und allgemein zugänglichen IT-Infrastruktur über das Internet können neue Partner ohne großen Aufwand in ein Projekt aufgenommen werden indem diesen Zugriffe auf alle notwendigen Projektinformationen gegeben wird. Mit der Bereitstellung passender IT-Werkzeuge für das Projektmanagement, Datenmanagement und Vertragsmanagement wird eine effektive Projektbearbeitung gewährleistet. In diesem Beitrag werden die konzeptionellen Grundlagen virtueller Organisation genauer betrachtet und deren Anwendbarkeit auf virtuelle Planungsteams im Bauwesen untersucht. Anschließend wird, aufbauend auf diese Erkenntnisse, der Aufbau und die Komponenten einer Softwareumgebung zur Unterstützung des virtuellen Planungsteams erörtert. Zum Schluss erfolgt eine Darstellung des durch das BmBF geförderte Projekt iCSS. KW - Bauplanung KW - Virtuelles Unternehmen KW - Teamorganisation KW - Projektmanagement KW - Datenaustausch Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3599 ER - TY - CHAP A1 - Schelle, H. T1 - Operations Research and Projektmanagement: kritischer Rückblick und Zukunftsperspektiven N2 - Anwendungen der Methoden des Operations Research in der Praxis des Projektmanagements sind so gut wie kaum zu finden. Diese Anwendungslücke ist umso erstaunlicher, als es eine große Zahl von theoretischen Veröffentlichungen zum Themenkreis >Operations Research und Projektmanagement< gibt . Der Beitrag arbeitet die verschiedenen Ursachen für die bislang geringe praktische Relevanz der Disziplin >Operations Research< heraus und macht Vorschläge, wie in Zukunft anwendungsfreundlichere Modelle entwickelt werden können. KW - Projektmanagement KW - Operations Research Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4227 ER - TY - CHAP A1 - Scheer, Sergio A1 - Gama, Carmen Lúcia G. T1 - Learning objects for a teaching and learning network in structural engineering : Developing learning objects for a structural engineering educational network N2 - Information and Communication Technologies (ITC) in education have been extensively discussed nowadays. In this e-learning scenario, the construction and use of environments that support teaching and learning is a reality. Therefore, for time and general resource savings it is crucial the access to hypermedia contents with great interactivity and with high reusability. Substantial efforts have been centered in the search for a metadata proposal (metadata is a generic term used to describe data that can be used to identify and to describe common characteristics among different documents) that can be standardized and is system independent for the so called learning objects. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Wissensverarbeitung KW - learning objects KW - repository KW - applets KW - reusability KW - structural engineering Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-856 ER - TY - CHAP A1 - Scheer, Sergio A1 - Dos Santos, Aguinaldo A1 - Hinks, John T1 - An approach for promoting knowledge exchange on production practices through the Internet N2 - Recent research shows that current learning strategies in construction industry have not been effective in implementing lean principles in construction. With that in mind the researchers set to investigate an alternative learning strategy in order to promote learning at the international level. A web-based environment, was developed for this project with the intent of promoting learning and knowledge exchange on the theory and practice of "process transparency" across different countries. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Wissensverarbeitung KW - pull learning KW - transparency KW - knowledge exchange KW - web-based learning Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-821 ER - TY - CHAP A1 - Schapke, Sven-Eric A1 - Scherer, Raimar J. T1 - A Four Layer Bayesian Network for Product Model Based Information Mining N2 - Business and engineering knowledge in AEC/FM is captured mainly implicitly in project and corporate document repositories. Even with the increasing integration of model-based systems with project information spaces, a large percentage of the information exchange will further on rely on isolated and rather poorly structured text documents. In this paper we propose an approach enabling the use of product model data as a primary source of engineering knowledge to support information externalisation from relevant construction documents, to provide for domain-specific information retrieval, and to help in re-organising and re-contextualising documents in accordance to the user’s discipline-specific tasks and information needs. Suggested is a retrieval and mining framework combining methods for analysing text documents, filtering product models and reasoning on Bayesian networks to explicitly represent the content of text repositories in personalisable semantic content networks. We describe the proposed basic network that can be realised on short-term using minimal product model information as well as various extensions towards a full-fledged added value integration of document-based and model-based information. KW - Bauwerk KW - Datenmanagement KW - Produktmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1207 ER - TY - CHAP A1 - Schallehn, W. T1 - Umweltorientiertes Projektmanagement N2 - Das studentische Projekt Umweltorientiertes Projektmanagement (UWoPM) eröffnet eine neue Generation von Arbeitsweisen im Projektmanagement. Umweltbelange wirken über Rechtsvorschriften immer stärker in das Projektgeschäft hinein. Durch Einbeziehung von rechtsrelevanten Daten in die Projektdatenbasis sowie von Rechtsbestimmungen in die Wissensbasis wird eine Softwareunterstützung für (wenn auch zunächst nur elementare) Rechtsfragen geboten. Eine spezielle Präsentation von Rechtswissen und eine komfortable Unterstützung der Antragstellung sollen dies in die Selbstverständlichkeiten des Projektmanagements einbringen. Gleichzeitig bietet der UWoPM-Prototyp zeitgemäße Systemlösungen für die Kommunikation Antragsteller - Behörde sowie für den Workflow innerhalb der Genehmigungsbehörde. Dieser Vortrag gibt Einführung und Übersicht zu insgesamt 18 Diplomarbeiten, in denen die Einzelkomponenten des UWoPM entwickelt wurden. Zentrales Problem war die Überführung gesetzlicher Vorschriften in Wissensbasen. Durch Beschränkung auf >Kernbestimmungen< und Ausweis von Interpretationsbedarf wurde ein prinzipieller Lösungsweg realisiert. Die technische Realisierung konnte zwar über einen Prototyp noch nicht hinausgehen, weist aber die Realisierbarkeit des Gesamtansatzes nach. KW - Projektmanagement KW - Umweltfaktor Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4528 ER - TY - CHAP A1 - Sariyildiz, Sevil A1 - Schwenck, M. T1 - An Integrated Software Environment for the Architectural Design Process N2 - The general motivation of this research is to develop software to support the handling of the increased complexity of architectural design. In this paper we describe a system providing general support during the whole process. Instead of only developing design tools we are also addressing the problem of the operating environment of these tools. We conclude that design tools have to be integrated in an open, modular, distributed, user friendly and efficient environment. Two major fields have to be addressed - the development of design tools and the realisation of an integrated system as their operation environment. We will briefly focus on the latter by discussing known technologies in the field of information technology and other design disciplines that can be used to realise such an environment. Regarding the first subject we have to state the need of a detailed tool specification. As a solution we suggest a strategy where the tool functions are specified on the basis of a transformation, where a hierarchical process model is mapped into specifications of different design tools realising appropriate support for all sub-processes of architectural design. Using this strategy the main steps to develop such a support system are: implementation of a framework as basis for the integrated design system decision whether the tool specification are already implemented in available tools in this case these tools can be integrated using known methods for tool coupling otherwise new design tools have to be developed according to the framework KW - Architektur KW - CAD Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4447 ER - TY - CHAP A1 - Sampaio, Alcinia Zita A1 - Henriques, Pedro T1 - Interactive project planning in construction based on virtual reality technology N2 - This paper describes a didactic application that is part of a research project whose main aim is to develop a computer-aided system which will assist design and construction processes. It is based on the visual simulation of construction activities. Geometric modeling and virtual reality techniques are used in the visualization of the design process and to define user-friendly interfaces in order to access construction information, which could prove useful to Civil Engineering professionals. As a first step, was developed a prototype that serves as a didactic tool for Civil Engineering students of disciplines concerned with building construction. The construction of a double brick wall is the case studied. The wall is defined as a three dimensional model formed with the several components needed to edify it. Using the wall's virtual model it is possible to show, in an interactive way, the sequence of the construction process and observe from any point of view the configurations in detail of the building components. This is then a didactic tool application in construction processes domain of great interest to Civil Engineering students. KW - Bauwesen KW - CAD KW - Optimierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3588 ER - TY - CHAP A1 - Sampaio, Alcinia Zita T1 - Definition of a bridge deck geometrical modelling process to automate design graphical representations N2 - The construction of a new building interferes with the existent environment. A careful aesthetic study must be made at an early stage in the design and the visualization of a three-dimensional (3D) model of the structure is the best way to analyse it. As some structures presents a complex shape is difficult to execute a 3D model as well as the specific drawings. Using traditional graphical systems, the execution of deck specific drawings is extremely time consuming and the 3D deck model gives an approximation only of the exterior shape of the deck. The modelling scheme proposed here allows the automation of the geometric design phases related to the deck bridge element using as a means of integration a geometric database representative of the real deck shape. This concept was implemented in a computer program. This application is an important support in the process design namely at the conceptual and graphical stages. The computer application provides an important tool to the bridge designer particularly at the conceptual stage, as it allows aesthetic and structural evaluation of the bridge at an early stage in the design. The geometric modelling process and graphical results of a case study are presented. KW - Brückenbau KW - CAD KW - Dreidimensionales Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3575 ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Udo F. A1 - Theiss, Mirko T1 - Dynamisch-adaptive Kostenkalkulation für die Bauprojektentwicklung in vernetzten Systemen N2 - Die Entwicklung von Projekten des Hoch- und Industriebaus ist durch eine Vielzahl von zu verarbeitenden Informationen und Bewertungsgrundlagen in den Planungsphasen der Bau-land- sowie der Hoch- und Industriebauentwicklung für die Kostenkalkulation geprägt. Die Identifizierung, Beschaffung, Verwaltung und Verarbeitung dieser nach Art, Form und Inhalt bei den Kommunikationspartnern verteilt vorliegenden Informationen führt zu komplexen Planungsprozessen. Zur Bewältigung dieser Komplexität ist die Bauprojektentwicklung kooperativ in vernetzten Systemen durchzuführen. Insbesondere kann die Kostenkalkulation auf Basis der sich zeitlich verändernden Fachinformation im Netz effizient, zeitnah und mit hoher Qualität durchgeführt werden. Die bisher eingesetzten Methoden und Verfahren unterstützen die Projektplaner bei der Datenerfassung und -verarbeitung der kostenrelevanten Informationen nur in lokalen Computernetzen. Die Erfassung von Kosteninformationen, wie zum Beispiel Kostenschätzungen zur Planung von Projekten oder die im Laufe der Projektentwicklung entstehenden Kosten, liegen jedoch verteilt bei den Projektpartnern vor. Es ist daher notwendig, zur Vermeidung von Erfassungs-fehlern und zur Steigerung der Kooperation der Projektpartner bei der wirtschaftlichen Kalkulation von Bauprojekten, den Projektpartnern eine rechnergestützte und projektweite Kalkulation unter Nutzung von Computernetzwerken zu ermöglichen. Die Autoren stellen ein agenten-basiertes Kooperationsmodell für die Kosten-Kalkulation in Rahmen der Bauprojektentwicklung in vernetzten Systemen vor, das durch Strukturierung der Planungsinformationen die selbständige Suche nach klar definierten Informationen auf Basis mobiler Internet-Agenten dynamisch-adaptiv unterstützt. KW - Bauplanung KW - Informationsmanagement KW - Vernetztes System Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6086 ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Udo F. A1 - Greb, Steffen T1 - Vernetzte Bauprozesssteuerung auf der Basis bauteilspezifischer Prozessmuster für geotechnische Konstruktionselemente N2 - Der Beitrag basiert auf den Ansätzen und Ergebnissen des Forschungsprojekts >Prozessorientierte Vernetzung von Ingenieurplanungen am Beispiel der Geotechnik<, des DFG-Schwerpunktprogramms 1103 >Vernetzt-kooperative Planungsprozesse im Konstruktiven Ingenieurbau<. Ziel ist die Entwicklung einer netzwerkbasierten Kooperationsplattform zur Unterstützung von Ingenieurplanungen. Methodische Grundlagen hierfür stellen die Petri-Netze mit individuellen Marken in Verbindung mit einer semantischen Informationsbewertung dar. Der Beitrag zeigt an einem Beispiel die grundlegenden Möglichkeiten der Petri-Netze auf und stellt die Steuerung der Planungsprozesse aufgrund von Metainformationen dar. Darüber hinaus wird der Ansatz verfolgt, auf der Basis bauteilorientierter Prozessmuster für geotechnische Konstruktionselemente den veränderlichen Prozessablauf zu erfassen. Abschließend wird ein Weg zur Implementierung gezeigt. KW - Geotechnik KW - CAD KW - Prozessmodell KW - Rechnernetz Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3556 ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Iris A1 - Gutzke, Thomas T1 - Mobile Computing in der Grundwasserbewirtschaftung N2 - Die Bewirtschaftung von Grundwasser umfasst zum einen die Nutzungserfordernisse und Versorgungsbedürfnisse und zum andern den Schutz des Grundwassers als Bestandteil des Naturhaushaltes. Die Verwendung von Informations- und Kommunikationsmethoden zur numerischen Grundwassermodellierung und zur Verwaltung von großflächigen qualitativen und quantitativen Grundwasserinformationen eröffnen die Möglichkeit einer nachhaltigen wasserwirtschaftlichen Planung sowie einer gezielten Steuerung der Auswirkungen von Grundwasserentnahmen und -versickerungen. Im Rahmen des Pilotprojektes Grundwasser-Online im Hessischen Ried (www.grundwasser-online.de) wurden gezielt die Arbeitsabläufe bei der Erfassung der Daten zur Grundwasserbewirtschaftung sowie der anschließenden Verarbeitung analysiert, bewertet und software-technisch umgesetzt. Ein wichtiger Aspekt dabei ist die Datenerfassung an den räumlich verteilten Grundwassermessstellen. Der vorliegende Beitrag zeigt auf, wie mobile EDV Geräte mit einer geeigneten Software die Arbeitsabläufe beim Einsatz vor Ort effizienter gestalten und die Einhaltung der Messvorgaben unterstützen können. Durch die Minimierung von Fehlerquellen kann dabei eine Qualitätsverbesserung des Datenbestandes erreicht werden. Es wird ein Konzept zur mobilen Erfassung von Grundwasserdaten unter Verwendung von GPS-Positionsdaten und Plausibilitätsprüfungen vorgestellt. Die Technologien und Herausforderungen bei der prototypischen Umsetzung werden aufgezeigt. KW - Grundwasser KW - Bewirtschaftung KW - Modellierung KW - Datenerfassung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3547 ER - TY - CHAP A1 - Rüppel, Uwe A1 - Klauer, Thomas T1 - Internetbasiertes Management von Bauprojekten auf der Basis eines dynamischen Workflow-Frameworks N2 - Die Baubranche zeichnet sich durch eine sehr starke Arbeitsteilung aus, die hohe Ansprüche an die Koordination der Prozesse und auch an die Qualität der auszutauschenden Informationen stellt. Trotz der gegenwärtigen informationstechnologischen Möglichkeiten gibt es in der Bauwirtschaft noch keine umfassende Lösung, um diesen Anforderungen gerecht zu werden. Insbesondere sind Modelle zur durchgängigen Koordinierung der Prozesse und Arbeitsabläufe (Workflows) im Informations- und Kommunikationsverbund für die baupraktischen Belange noch nicht entwickelt worden. Die Abbildung der dynamischen Aspekte der Workflows zwischen Bauherren, Projektleitung, Fachplanern, Bauaufsichtsbehörde und Bauunternehmen können zu einer Erhöhung der Termin- und Kostensicherheit führen. Vorhandene Software-Produkte im Bereich des Workflow-Managements erfüllen die Anforderungen der vernetzt-kooperativen Planung bzw. Ausführung im Bauwesen nicht durchgängig und sind nicht in einen internetbasierten Projektraum integrierbar. Die Grundlage des hier vorgestellten Systems bildet ein so genanntes Workflow-Framework, dem alle Fachinformationen, wie Kosten, Termine, Gebäudestruktur und (Plan-) Dokumente untergeordnet sind. Dieses Framework stellt eine auf die Anforderungen des Bauwesens ausgerichtete Anwendung dar, mit deren Hilfe die Beteiligten und deren Aktivitäten, die Fachinformationen und die zu verwendenden Fachapplikationen koordiniert und überwacht werden können. Mit dieser Anwendung, die in den internetbasierten Projektraum Baukom-Online integriert ist, kann zum einen die Projektleitung bzw. der Projektsteuerer bei der Koordination, Steuerung und Überwachung der Bauprojektabwicklung in technischer, rechtlicher und wirtschaftlicher Hinsicht unterstützt werden. Zum anderen ermöglicht es den Beteiligten in Planung, Genehmigung und Ausführung, ihre Arbeitsabläufe im Hinblick auf eine fristgerechte und wirtschaftliche Abwicklung effizienter zu gestalten. KW - Bauablauf / Ablaufplanung KW - Management KW - Internet Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3561 ER - TY - CHAP A1 - Rutman, Y. L. T1 - Pseudorigidity method (PRM) for solving the problem of limit equilibrium of rigid-plastic constructions N2 - One of the basic types of strength calculations is the calculation of limit equilibrium of constructions. This report describes new method for solving the problem of limit equilibrium. The rigid-plastic system in this method is substituted with an «equivalent» elastic system with specially constructed rigidities. This is why it is called the method of pseudorigidities. An iteration algorithm was developed for finding pseudorigidities. This algorithm is realized in a special software procedure. Conjunction of this procedure with any elastic calculation program (base program) creates a program solving rigid-plastic problems. It is proved, that iterations will be converge to the solution for the problem of limit equilibrium. The solution of tests show, that pseudorigidity method is universal. It allows the following: - to solve problems of limit equilibrium for various models (arch, beam, frame, plate, beam-wall, shell, solid); - to take into account both linearized and square-law fluidity conditions; - to solve problems for various kinds of loads (concentrated, distributed, given by a generalized vector); - to take into account the existing various of fluidity criteria in different sections etc. The iterative PRM process quickly converges. The accuracy of PRM is very high even in case of rough finite-element structuring. The author has used this method for design protection systems from extreme loads due to equipment of nuclear power stations, pipelines, cargo in any transportation. KW - Grenzzustand KW - Gleichgewicht KW - Plastizitätstheorie Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6094 ER - TY - CHAP A1 - Ruess, Martin T1 - Die Bestimmung von Eigenzuständen mit dem Verfahren der Inversen Matrizeniteration N2 - Die Inverse Matrizeniteration ist ein Verfahren zur Bestimmung der Eigenzustände reeller, symmetrischer Matrizen mit konvexer Profilstruktur. Das Verfahren zeichnet sich besonders durch den Erhalt der Profilstruktur und die Bestimmung der Eigenwerte in geordneter Reihenfolge aus. Die Iteration ermöglicht die gezielte Bestimmung mehrerer aufeinander folgender betragskleinster Eigenwerte, wie es im Bauwesen insbesondere für Stabilitäts- und Schwingungsanalysen erforderlich ist. Die Anwendung dieses Verfahrens hat gezeigt, daß ein Teil der gesuchten Eigenwerte mit wenigen Iterationszyklen bestimmt werden kann, während andere eine größere Anzahl von Iterationszyklen erfordern. Diese lokale Konvergenzverschlechterung kann durch eine Jacobi-Randkorrektur, wie sie im Beitrag näher erläutert wird, behoben werden. KW - Matrizenrechnung KW - Eigenwert KW - Iteration Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5994 ER - TY - CHAP A1 - Rueppel, Uwe A1 - Meißner, Udo F. A1 - Greb, Steffen T1 - A Petri Net based Method for Distributed Process Modelling in Structural Engineering N2 - The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Petri-Netz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1338 ER - TY - CHAP A1 - Rueppel, Uwe A1 - Klauer, Thomas T1 - Internet-based Workflow-Management for Civil Engineering Projects N2 - The growing competition pressure in the building industry increases the demands on the design and construction processes in respect to economical, technical and time aspects. These demands require efficient improvements of the value-added chain, which can be realized mainly with the usage of innovative information- and communication-technologies. To support the collaboration of all participants involved in a certain building project the Workflow-Management-System “BauKom-Online” has been developed. In the focus of the system is to support the coordination of the participants and their information exchange. Such a software-method is well suited to ensure a high quality planning process. The modelling of business-processes enables a better self-comprehension of the participants work and helps to enhance the project performance. The system architecture of BauKom-Online contains two basic components: the processmodelling tool and the workflow-engine. The process-model contains of activities and states of the planning and construction processes and their relations. These connected processes compose the workflow. Such a process-model for engineering purposes has to satisfy several needs, e.g., the consideration of planning and building alternatives, dynamic changes of the model during execution of the project and the linkage to further technical objects like costs, building structure, specifications and documentmanagement. Furthermore, the scheduling of the project can be done within the process-model and can be visualized as a Gantt-diagram. ... KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Prozessmanagement KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1647 ER - TY - CHAP A1 - Rueppel, Uwe A1 - Gutzke, Thomas T1 - Groundwater-Monitoring based on dynamic co-operative eGovernment-Processes N2 - As a result of the pilot-project “Grundwasser-Online” the supervision and the active controlling of large monitoring- and catchment-areas are realised by a co-operative integration of all related institutions, a synchronisation-process to combine all distributed data into one central server database, and a high-level eGovernment-Service to provide evaluated information over the internet. Based on this software system the local authorities are able to supervise the groundwater-levels and to find adequate decisions, which finally result in official permissions for the usage of groundwater-reservoirs by the water supply companies. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Grundwasser KW - Monitorüberwachung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1611 ER - TY - CHAP A1 - Rudnicki, Andrzej A1 - Wainaina, Simon A1 - Hempel, Lorenz T1 - Optimization of street lane usage N2 - This paper contributes to discussion on introduction of exclusive lane for public transport. Analyses of results have been presented on effectiveness of usage of a 4 - lane and a 6 - lane street with and without an exclusive lane for buses. Two basic sub-models have been applied: - the binary logit model for modal split estimation; it takes into consideration the relation of travel time performed by private cars to public transport, - the polynomial model for predicting link impedance; the real travel time is affected by relation of traffic volume to the design capacity The parameters of both sub-models have been calibrated for the Polish conditions. The relationships are determined between number of person trips and traffic volume of buses/private cars, market share of public transport in motorised trips, average travel time lost in trips, average operation cost. An iterative technique addresses a feedback between the modal split and traffic volumes. Numerical calculations by use of EXCEL and MATLAB were carried out. Typical values of corridor length, occupancy rate of passenger car, design capacity of the bus, access and egress time to and from the parking/bus-stop in urban areas were applied. On the basis of the estimated results, the marginal parameter values: number of people carried at which separated lane for buses is most effective , traffic volume for private cars, traffic volume for buses and share of public transport in trips have been got by consideration of the average travel time lost and operational cost as criteria: Then introduction of street lanes with and without exclusive lane for buses in relation to number of person trips can be optimized. KW - Öffentlicher Personennahverkehr KW - Busspur KW - Transportproblem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3539 ER - TY - CHAP A1 - Romberg, Richard A1 - Treeck, Christioph van A1 - Niggl, Andreas T1 - Numerische Simulation auf Basis des IFC-Bauwerksmodells N2 - Dieser Beitrag zeigt einen Ansatz, verschiedene numerische Simulationsaufgaben auf ein gemeinsames und durchgängig dreidimensionales Geometriemodell zu gründen. Hinsichtlich der physikalischen Modelle reicht die Bandbreite der hier vorgestellten Anwendungen von einer ganzheitlichen Betrachtung der Gebäudestruktur in der Strukturmechanik über die raumbezogene, hochauflösende Modellierung konvektiver Raumluftströmungen bis hin zur Simulation des thermischen Verhaltens eines ganzen Gebäudes. Das jeweils zugrunde liegende numerische Verfahren setzt dabei auf einem stets gleichen Zwischenmodell der realen Geometrie der Struktur auf, ohne dabei vereinfachende dimensionsreduzierte Modelle anzuwenden. Nachfolgende Werkzeuge werden derzeit im Rahmen mehrerer Forschungsprojekte an dieses Geometriemodell angeschlossen: Die p-Version der FEM für die Strukturanalyse, ein sog. Mehrzonenmodell für die thermische Gebäudesimulation sowie ein auf dem sog. hybriden thermischen Gitter-Boltzmann-Verfahren (hTLBE) basierender Strömungssimulationscode. Der Import geometrischer wie semantischer Daten eines Bauwerks in das Simulations-Framework erfolgt nach dem Produktmodell der Industry Foundation Classes (IFC), das sich als Quasi-Standard für den Datenaustausch im Bauwesen etabliert hat. Das IFC-Schema dient dabei nicht als Modell zur internen Speicherung von Daten, sondern wird hier als Schnittstelle zur Anbindung unterschiedlicher Programme wie CAD-Anwendungen für Architekten oder anderen Modellierungstools verwendet. Die Implementierung dieser Schnittstelle erfolgt unter Verwendung einer sog. Toolbox, die das Objektschema der IFC auf ein Klassenmodell einer objektorientierten Programmiersprache abbildet und Werkzeuge für den effizienten Objektzugriff zur Verfügung stellt. Damit werden Grenzen zwischen spezialisierten Softwarepaketen, die maßgeschneidert auf spezielle Erfordernisse ausgerichtet sind, aufgebrochen und der Datenaustausch über die Anwendungsgrenzen hinaus unterstützt. Dies ist eine Konsequenz aus einer dem Wunsch nach vernetzt-kooperativen Planung von Bauwerken.... KW - Bauwerk KW - Dreidimensionales Modell KW - Datenaustausch Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3521 ER - TY - CHAP A1 - Rodriguez, Adhamina T1 - Information Exchange in The Construction Industry : The Particular Case of Green Buildings N2 - Construction is a conservative industry that over the last twenty ye ars has experienced drastic changes in the way that interdisciplinary teams interact to design and execute a project. In this article we offer a general overview of how the main participants cooperate in the different phases of a construction project, and which are some of the main areas for communication improvement. We also explore the communication tools used in the exchange of information, and identify the main causes of information breakdown. The general framework of this study is of application to both standard and green projects. At the end of the article we discuss the peculiarities of green buildings. Our goal is to offer a series of industry insights derived from the perspective of a general contractor aimed at identifying the areas where contributions in computing and information exchange could have a greater impact on the successful completion of a project. KW - Architektur KW - Verteiltes System KW - Informationsaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1757 ER - TY - CHAP A1 - Robert-Nicoud, Yvan A1 - Raphael, Benny A1 - Smith, Ian F. C. T1 - Using entropy to maximize the usefulness of data collection N2 - This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon’s Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system. KW - Mobile Computing KW - Funknetz KW - Entropie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1177 ER - TY - CHAP A1 - Rickelt, Christian A1 - Reese, Stefanie T1 - A model adaptive and model reduction strategy combining system-theoretical methods and substructuring N2 - This paper focuses on a new three-level discretisation strategy which enables the transition between continuum/structural (I) and structural/black box modelling (II). The transition (I) is realised by means of a model adaptive concept based on an innovative finite element technology. For transition (II) we apply the truncated balanced realisation method (TBR). The latter represents an established system theoretical model reduction technique which is here combined with a novel substructure technique. The approach provides a modular concept to facilitate the computational analysis of complex structures. The final goal is to apply the strategy to life time estimation. KW - Adaptives System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1516 ER - TY - CHAP A1 - Richter, Katharina A1 - Donath, Dirk T1 - Computernetzwerke als Integrations- und Planungswerkzeuge N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 'Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken' entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Vor dem Hintergrund zunehmender Komplexität der Bauaufgaben steigt die Zahl der an einem Projekt Beteiligten und deren örtliche Verteilung. Planungsvorhaben sind dadurch verstärkt gekennzeichnet durch einen erhöhten Aufwand in Planungskoordination, -organisation und Kommunikation. Globale Computernetzwerke - das Internet - bieten Potential zur Lösung dieser Aufgaben. Vor diesem Hintergrund sind in der letzten Zeit eine Vielzahl von Systemen die sich unterschiedlichsten Techniken bedienen entstanden. Allen diesen Systemen gemein ist die Vision der Optimierung des Planungsprozesses, Vereinfachung der Kommunikation und die Verbesserung des Zeitmanagements. Aus Sicht der Architekten stellt sich die Situation derzeit als ambivalent dar: Einerseits sind die Ideen, die den 'IBPM - Systemen' zugrunde liegen, nachvollziehbar und offerieren einen sofort messbaren Nutzen. Auf der anderen Seite stehen vielfältige Aspekte, die den uneingeschränkten Einsatz dieser Systeme augenscheinlich verhindern. Ein Focus bei der Beleuchtung dieser Schwachstellen liegt auf dem omnipräsentem Problem der mangelhaften Unterstützung graphischer Daten als die bedeutendste Informationsgrundlage im Planungsprozess. Aus der konkreten, fachspezifischen Analyse des Planungsprozesses, der Untersuchung potentieller Entwicklungsmöglichkeiten vorhandener Systeme und der intensiven Auseinandersetzung mit neuen Internettechnologien entstand im Zuge dieses Forschungsschwerpunktes eine architekturpraxisnahe Applikation, die das Internet weg vom reinen Präsentationsmedium, über ein reines Kommunikationsmittel hinaus, hin zu einer leistungsfähigen interaktiven Schnittstelle für alle am Entwurfs- und Planungsprozess Beteiligten erschließt. KW - Architektur KW - Planung KW - Netzwerk KW - Kooperatives Informationssystem KW - Internet Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-93 ER - TY - CHAP A1 - Ren, Aizhu A1 - Shi, Jianyong A1 - Xu, Yun T1 - Modeling of Buildings and Roads for Urban Applications based on 2D Digital Maps N2 - Three-dimensional models of urban objects play an important role in the urban applications such as urban planning, environmental concerning, or urban disaster mitigations. While the modeling of urban objects is time consuming and storage costing. This paper presents solutions for this. Buildings with regular shapes and plane roofs are constructed into computer models by identifying of graphic elements from the digital maps of urban area to get building base plane and building heights. Buildings with irregular shapes and non-plane roofs are constructed into computer models by employment of a specific system developed by the authors. Road objects and topologies are constructed into computer models by employment of specific algorithms. The solutions presented in this paper has been used in the development of urban disaster mitigation system for Shantou, China. KW - Architektur KW - Verteiltes System KW - Geoinformationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1791 ER -