TY - CHAP A1 - Christov, Christo T. A1 - Petkov, Zdravko B. T1 - DETERMINATION OF THE DYNAMIC STRESS INTENSITY FACTOR USING ADVANCED ENERGY RELEASE EVALUATION N2 - In this study a simple effective procedure practically based upon the FEM for determination of the dynamic stress intensity factor (DSIF) depending on the input frequency and using an advanced strain energy release evaluation by the simultaneous release of a set of fictitious nodal spring links near the crack tip is developed and applied. The DSIF is expressed in terms of the released energy per unit crack length. The formulations of the linear fracture mechanics are accepted. This technique is theoretically based upon the eigenvalue problem for assessment of the spring stiffnesses and on the modal decomposition of the crack shape. The inertial effects are included into the released energy. A linear elastic material, time-dependent loading of sine type and steady state response of the structure are assumed. The procedure allows the opening, sliding and mixed modes of the structure fracture to be studied. This rational and powerful technique requires a mesh refinement near the crack tip. A numerical test example of a square notched steel plate under tension is given. Opening mode of fracture is studied only. The DSIF is calculated using a coarse mesh and a single node release for the released energy computation as well a fine mesh and simultaneous release of four links for more accurate values. The results are analyzed. Comparisons with the known exact results from a static loading are presented. Conclusions are derived. The values of the DSIF are significantly larger than the values of the corresponding static SIF. Significant peaks of the DSIF are observed near the natural frequences. This approach is general, practicable, reliable and versatile. KW - Bruchmechanik KW - Dynamische Belastung KW - Spannungsintensitätsfaktor KW - Eigenwertproblem Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5770 ER - TY - THES A1 - Alt, Dieter von T1 - Ausbruchverhalten von Porenbetonplatten bei randnaher Punktstützung N2 - Schwerpunkt dieser Arbeit ist die Untersuchung des Ausbruchverhaltens von unbewehrten Porenbetonplatten bei konzentrierter Lasteintragung in Randnähe. In der Praxis tritt diese Problematik bei Befestigungen oder Verankerungen auf, die eine punktuelle Beanspruchung bewirken. Hauptziel der durchgeführten experimentellen und numerischen Untersuchungen war das Erkennen von Gesetzmäßigkeiten für Versagenserscheinungen und für Bruchlasten in Abhängigkeit von variierenden Geometrie- und Materialparametern. Dabei waren Größe und Lage der Lasteinleitungsstelle sowie die Materialfestigkeit die wichtigsten Einflussfaktoren. Von besonderem Interesse war auch das spröde Verhalten des Porenbetonmaterials auf das Ausbruchverhalten. Die Arbeit gliedert sich in drei Hauptteile: die Experimente mit anschließend weiterführenden numerischen Untersuchungen, sowie Bemessungskonzepten mit Ausbruchgleichungen. Ein weiteres Kapitel behandelt die Zugfestigkeit von Porenbeton. Die Experimente wurde an für Wand- oder Deckenplatten originaldicken Versuchskörpern durchgeführt. Dabei waren die Lagerbedingungen so festgelegt, dass sich möglichst ein ungestörter Ausbruchkörper ausbilden konnte. Numerische Spannungsuntersuchungen über eine räumliche Idealisierung der Versuchskörper mit dem Finite- Element- Programmsystem ANSYS gaben Aufschlüsse über Ort und Größe von bruchverursachenden Spannungen. Des weiteren wurden über die Versuchsergebnisse hinaus Berechnungen über den Einfluss von Variationen bei der Plattengeometrie durchgeführt. Es wurden Betrachtungen über die Zugfestigkeit als einen maßgebenden Faktor für das Ausbruchverhalten geführt. Numerische Risssimulationen gaben Aufschluss über den Spannungszustand und den Ablauf der Rissentwicklung. KW - Platte KW - Porenbeton KW - Einzellast KW - Bruchmechanik KW - slab KW - aerated concrete KW - concentrated load KW - failure Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040310-591 ER - TY - CHAP A1 - Ebert, Matthias A1 - Bucher, Christian T1 - Modelling of changing of dynamic and static parameters of damaged R/C N2 - Dynamic testing for damage assessment as non-destructive method has attracted growing in-terest for systematic inspections and maintenance of civil engineering structures. In this con-text the paper presents the Stochastic Finite Element (SFE) Modeling of the static and dy-namic results of own four point bending experiments with R/C beams. The beams are dam-aged by an increasing load. Between the load levels the dynamic properties are determined. Calculated stiffness loss factors for the displacements and the natural frequencies show differ-ent histories. A FE Model for the beams is developed with a discrete crack formulation. Cor-related random fields are used for structural parameters stiffness and tension strength. The idea is to simulate different crack evolutions. The beams have the same design parameters, but because of the stochastic material properties their undamaged state isn't yet the same. As the structure is loaded a stochastic first crack occurs on the weakest place of the structure. The further crack evolution is also stochastic. These is a great advantage compared with de-terministic formulations. To reduce the computational effort of the Monte Carlo simulation of this nonlinear problem the Latin-Hypercube sampling technique is applied. From the results functions of mean value and standard deviation of displacements and frequencies are calcu-lated. Compared with the experimental results some qualitative phenomena are good de-scribed by the model. Differences occurs especially in the dynamic behavior of the higher load levels. Aim of the investigations is to assess the possibilities of dynamic testing under consideration of effects from stochastic material properties KW - Stahlbetonbauteil KW - Bruchmechanik KW - Dynamische Belastung KW - Statische Last KW - Finite-Elemente-Methode KW - Stochastisches Modell Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5825 ER -