TY - THES A1 - Ötsch, Silke T1 - Überwältigen und schmeicheln. Der physiologische, symbolische und ganzheitliche Körper in der Architektur. T1 - Distraction and Pamper. The Physiological, Symbolical and Integrated Body in Architecture. N2 - Der menschliche Körper ist Bezugspunkt von repräsentativen Strömungen der zeitgenössischen Architektur, so lautet die Hauptthese der Dissertation. Bislang wurde das zeitgenössische architekturimmanente Konzept des Körpers größtenteils selektiv und anhand wenig repräsentativer Beispiele von der Kritik behandelt: Ein auf physiologische Gesichtspunkte reduzierter Körper interagiert mit Bauten der klassischen Moderne oder neuen Medientechnologien. Eine umfassende Beschäftigung mit theoretischen Konzepten des Körpers und mit dem Fallbeispiel der zeitgenössischen Hotel- und Kasinoarchitektur in Las Vegas zeigt, dass der Begriff des Körpers komplexer geworden ist, womit der Bezug zum Körper weniger augenfällig erscheint. Der Ansatz der Phänomenologie, Erklärungsmuster durch eine Hinwendung zum Körper zu erhalten wird von verschiedenen Autoren in Frage gestellt. Wenn die Grenzen von Körper bzw. Leib und Umwelt nicht mehr zu bestimmen sind, tauge der Begriff nicht als Letztbegründung. Diese Kritik kann entkräftet werden, wenn auf das Modell der animate form der Philosophin Sheets-Johnstone zurückgegriffen wird. Dieses Konzept führt über Merleau-Pontys Körperbegriff hinaus, der Sheets-Johnstones Aussage nach abstrakt sei. Insbesondere eine Hinwendung zum taktil-kinästhetischen Körper liefert neue Perspektiven. Damit ist es sinnvoll, Architektur in ihrer Beziehung zum Körper zu beurteilen, weil der Körper definierbar und eingrenzbar ist. Anhand des Fallbeispiels der Hotel- und Kasinoarchitektur von Las Vegas kann aufzeigt werden, in welcher Weise sich Planer heute auf den Körper beziehen. Architektur geht in einem Megamedium auf, umgesetzt mit unterschiedlichen Techniken der Umweltgestaltung. Sowohl die Quantität als auch die Qualität der eingesetzten Reize nimmt zu. Dabei werden vor allem Reize eingesetzt, die tendenziell unbewusst wahrgenommen werden. Neben der Abstimmung auf die Sinne und die physische Beschaffenheit wird die symbolische Prägung des Körpers beachtet. Wünsche und Vorstellungen der Nutzer werden über Zielgruppenanalysen ermittelt und finden ihre Entsprechung in semiotischen Architekturelementen. Diese werden so gestaltet, dass der Nutzer den semiotischen Gehalt zugleich sinnlich erfährt. Dieses Konzept des Körpers wird als ganzheitlicher Körper bezeichnet. Aufschlussreich ist ein Vergleich mit Vorstellungen des Körpers vorausgehender Phasen, so z.B. dem Modell, das sich aus Scott Brown, Venturi und Izenours Buch Learning from Las Vegas ableiten lässt, und das sich ebenso aus Texten und Bauten von Zeitgenossen wie Lynch, Norberg-Schulz und Kahn herausarbeiten lässt. Über die Beschäftigung der Architekturtheoretiker mit der Sinneswahrnehmung entsteht ein Bewusstsein für den Einfluss des Symbolischen, das eine subjektive, durch das soziale und kulturelle Umfeld geprägte Wahrnehmung hervorbringt. Der Körper ist eingebettet in symbolische Systeme wie Konventionen und Traditionen, die sein Handeln bestimmen. Dahingegen beziehen sich Vertreter der klassischen Moderne hauptsächlich auf die physiologischen Eigenschaften des Körpers, seine Abmessungen und Bewegungsabläufe, wie Texte, Bauten und Menschmodelle z.B. von Meyer, Neutra, Le Corbusier und Neufert zeigen. Es fällt auf, dass in Texten über Architektur von Las Vegas häufig Begriffe vorkommen, die zugleich zentrale Termini der Phänomenologie sind, wie Atmosphäre und der englische Begriff experience. Es zeigt sich, dass sich die Bedeutungen der philosophischen Termini in der Architektur des Fallbeispiel widerspiegelt. Anders als die vorschnelle Etikettierung der Architekturströmung als „Erlebnisarchitektur“ suggeriert, bezieht sich der Begriff experience auf eine Ausrichtung an der Erfahrung. Diese ist das Resultat der langfristigen Prägung einer konkreten Nutzergruppe durch den in der Umwelt agierenden und durch seine symbolische Prägung beeinflussten Körper. Die Erfahrung impliziert das Erlebnis, als kurzfristige Interaktion von Körper und Umwelt. Am Fallbeispiel kann außerdem gezeigt werden, dass Techniken zur Schaffung von Atmosphären eingesetzt werden. In Anlehnung an den Philosophen Böhme kennzeichnen sich Atmosphären durch eine besondere Nähe von Architektur und Körper. Die Tatsache, dass Architekten gezielt Atmosphären schaffen, die gemeinhin nicht der Strömung der „Erlebnisarchitekur zugerechnet werden, weist darauf hin, dass sich das Leitbild des ganzheitlichen Körpers in unterschiedlichen Kontexten findet. Im Gegensatz zu Thesen Eisenmans oder Jamesons, die eine Entfremdung von Körper und Raum bzw. das Ende des anthropozentrischen Weltbilds feststellen, propagieren Planer wie Jerde die Herstellung von Architektur, die Nutzer und Umwelt in einer übergeordneten Ganzheit vereint. Ganzheit kann aber trotz feinerer Abstimmung auf den Körper nur grenzwertig erreicht werden, da Nutzer nicht vollständig erfasst werden können, sich die Planungen auf bestimmte Zielgruppen beschränken und die Interessen von Planer und Nutzer verschieden sind. N2 - As the main assumption of this thesis says, the human body is an important reference of contemporary architecture. Usually the relation of the human body and architecture is discussed by focussing on a body restricted on its physiological properties interacting with modern architecture or new media technology. The examination of theoretical concepts of the human body accompanied by the case study of the contemporary architecture of Las Vegas shows, that the concept of the body has undergone a change of meaning. Following the thesis, many contemporary planners use the concept of the integrated body. The phenomenological approach which consists in finding explanations by focussing on the human body and its perception is contested by different author because of the impossibility to define the boundaries between the human body and its environment. Consequently the body would not serve as a reference. This objection is invalidate if one considers the concept of animate form of the philosopher Sheets-Johnstone. This concept goes beyond the different notions of the body which Merleau-Ponty proposes as Eigenleib or Fleisch. Especially the focus on the tactile-kinaesthetic body opens up new perspectives. Thence, as the human body can be defined and qualified this reference makes sense. The way in which planners draw attention to the human body is explained by considering the case study of recently built resort architecture in Las Vegas. Architecture forms a part of a megamedium generated by different disciplines of environmental design. Both the quantity and the quality of the stimulus used increase. Planners mainly use stimulus which the user perceives unconsciously. Besides the sensual perception, symbolic qualities are taken into account. The wishes and ideas of a specific target group are determined and converted to architectural elements. These semiotic elements are designed in a way the user can experience the meaning sensuously. This concept of the body is denominated the integrated body. As the comparison with the notion of the body in Scott Brown, Venturi and Izenours book Learning from Las Vegas and in texts and buildings of the author’s contemporaries as Lynch, Norberg-Schulz and Kahn shows, the concept of the body has changed. By concentrating on the bodily perception architects and theoreticians become aware of the influence of the symbolic. The body is imbedded in a system of conventions and traditions affecting its actions. Unlike this, architects of the modern movement mainly refer to the physiological properties of the body, to its size and mechanical properties, as examples of texts, buildings and man models of Meyer, Neutra, Le Corbusier and Neufert show. It is noticeable that journalists often employ terms to describe Las Vegas’ architecture which are usually used in the phenomenological discourse as experience and atmosphere. It can be shown that the meaning of the philosophical notion are reflected in the architecture. As to architecture, experience does not only stands for “Erlebnisarchitektur” (which means architecture of the event) but relates to the long term influence the target group’s user has succeeded by interacting with the physical and symbolic environment. The architectural case study also shows, that planners employ techniques to generate atmospheres. Following the philosopher Böhme atmospheres are situated between the subject and the object and by appealing the senses. Thus the body is very close to architecture. The fact that different architectural movements use techniques to generate atmospheres shows, that the idea of the integrated body can be found in different contexts. The user’s reactions make clear that atmospheric spaces effect people. That is why those spaces are used for political economical aims. The use of the spatial effects does not depend solely on design questions but is directly linked to the political and economical situation. KW - Körper KW - Merleau-Ponty KW - Maurice / Phénoménologie de la perception KW - Phänomenologie KW - Taylorismus KW - Las Vegas KW - Venturi KW - Scott Brown and Partner KW - Hotel- und Kasinoarchitektur KW - Body KW - Phenomenology KW - Las Vegas (Nev.) KW - Architecture Theory KW - Jerde Partnership International Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050727-6926 ER - TY - CHAP A1 - Zwölfer, Michael A1 - Thomas, Peter A1 - Schink, Claus-Jürgen A1 - Koch, Volker T1 - Life cycle optimized system solutions for densified housing with massive wood technology N2 - The objective of the joint project 'Life cycle optimised system solutions for densified housing with massive wood technology', short form Basys, was the development and application of an open building system for sustainable construction in a virtual enterprise. Four partners coming from building economy and a university institute developed the building system in a comprehensive planning process. By applying massive wood technology, most requirements of densified housing can be met and individual buildings can be produced on demand. KW - Lebenszyklus KW - Holzbau KW - Haus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-980 ER - TY - THES A1 - Zobel, Oliver Christian T1 - Typologie und Topologie der Pflegebedürftigkeit und -infrastruktur im Freistaat Thüringen; Explorative Analysen zu pflegebedürftigen Menschen und Pflegeinfrastrukturen,ein Beitrag zur empirischen Regionalforschung und Landeskunde N2 - Der Autor, Berater und Gutachter für das Thüringer Ministerium für Soziales und Gesundheit und Mitverfasser der Thüringer Landespflegepläne, systematisiert und analysiert die Struktur und Situation pflegebedürftiger Menschen und deren Inanspruchnahme sozialer Pflegeinfrastrukturen im räumlichen und demographischen Kontext. Im Mittelpunkt dieser regionalwissenschaftlichen Forschungsarbeit stehen räumliche Disparitäten der Versorgungs- und Angebotssicherung sowie bisher kaum betrachtete räumliche Strukturen und Interdependenzen der Pflegebedürftigkeit und Pflegeleistungen. Hierzu wurden vom Autor mehrere regional differenzierte Datenerhebungen aller teilstationären und vollstationären pflegebedürftigen Menschen und der Pflegeinfrastruktureinrichtungen im Freistaat Thüringen durchgeführt.Durch die Integration explorativer Analysemethoden in die empirische Regionalforschung wird die Pflegelandschaft Thüringens für den Zeitraum 1994 bis 2000 dokumentiert und anhand eines relationalen Indikatorensystems die Strukturen und räumlichen Muster der Pflegebedürftigkeit und -infrastruktur, soziodemographischen und raumstrukturellen Einflusskomponenten sowie pflegespezifische Interdependenzen exploriert und analysiert. Ein Ergebnis sind typologische Aussagen zum Alter, zur Pflegeart und -schwere oder Struktur der Pflegeleistungen in einer hochauflösenden topologischen Differenzierung nach regionaler Herkunft pflegebedürftiger Menschen. So hat die Einführung der Pflegeversicherung die Situation der meisten pflegebedürftigen Menschen in Thüringen deutlich verbessert. In der Zeitreihenuntersuchung treten diese Anfangserfolge aber hinter identifizierten Problemlagen aus z.B. sukzessiver Polarisierung der Pflegeleistungen, wachsenden Infrastrukturdisparitäten mit exakt quantifizierbaren Wanderungsbewegungen pflegebedürftiger Menschen zurück. Ein Ergebnis topologischer Analysen sind regionale (Versorgungs-) Disparitäten, die zu nachgewiesenen Wanderungsbewegungen pflegebedürftiger Menschen führen.So resultiert die noch nachweisbare Leistungs- bzw. Funktionsfähigkeit der Pflegelandschaft Thüringens (im Sinne der pflegerischen Grundversorgung einer Teilkaskoversicherung) primär aus noch günstigen Rahmenbedingungen wie dem „selbstverständlich“ erbrachten informellen Pflegeleistungen (der Frauen und Töchter) und nur sekundär (oder kaum) aus der durchaus noch guten finanziellen Situation der Pflegeversicherung. Ferner konnte gezeigt werden, dass wachsende Versorgungsdisparitäten nur anteilig eine Infrastrukturproblematik darstellen.Die Ergebnisse werden im Hinblick auf die entwickelten Methoden und weiteren Untersuchungen diskutiert und im Kontext des theoretischen Teils u.a. zur Entwicklung der Altenhilfe, Pflegeversicherung und sozialen Infrastrukturversorgung betrachtet und vor den Konsequenzen des demographischen Wandels reflektiert. Mit den Untersuchungsergebnissen fordert der Autor, dass Alterung und Schrumpfung der Bevölkerung in Teilräumen als dominante Entwicklung nicht verleugnet werden darf, damit durch eine integrative Gesamtsicht einer auch sozial nachhaltigen Raumentwicklung die pflegespezifische Forderung nach einem möglichst selbstbestimmten und selbständigen Leben (im eigenen Haushalt) gewahrt und das Grundrecht auf Würde auch pflegebedürftiger Menschen gewährleistet bleibt.Dazu wird vorgeschlagen, mit einer modernen Regionalforschung, die durch hochauflösende Datenerfassung, neuen explorativen statistischen Analysemethoden und in Verbindung mit aussagekräftigen Visualisierungsverfahren ein qualifiziertes Monitoring- und Analysesystem für die Raumbeobachtung aufzubauen, um Problemregionen rechzeitig identifizieren und Planungen zeitnah initiieren zu können. KW - Raumforschung KW - empirische Regionalforschung KW - Infrastrukturplanung KW - Disparitäten KW - Demographie KW - Pflegeversicherung KW - Landeskunde Thüringen KW - demographischer Wandel KW - Landespflegeplanung KW - Pflegestatistik KW - Pflegebedarf Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041207-2353 ER - TY - THES A1 - Zierold, Sabine T1 - Der mediale Raum der Architektur T1 - The medial space of architecture N2 - Der architektonische Raum wird als ein Medium der Kommunikation im Kontext der >neuen< Medien begriffen, aus der Erkenntnis, dass er schon immer ein Medium war und aus einer komplexen Medienstruktur in Abhängigkeit von anderen Medien besteht. Im Prozess von Handlung und Kommunikation ist der architektonische Raum das Medium, das räumliche Nähe von Individuen über alle Sinne und das Bewusstsein gleichzeitig intensiv ermöglicht. Der architektonische Raum als immersives Kommunikationsmedium erreicht im Zeitalter der >neuen< Medien eine neue Dimension, indem mehr und andere Wirklichkeitsalternativen der Kommunikation zur Verfügung stehen. N. Luhmann folgend, wird die Architektur aus der Sicht der Form/Medium-Differenz systemtheoretisch als strukturierter Möglichkeitsraum betrachtet. Der Raum ist das Medium für Formen des architektonischen Raumes, in dem Architektur überhaupt erst wirksam wird. Umgekehrt sind die Formen des architektonischen Raumes Medien für die Wahrnehmung einer Vielzahl von räumlichen Wirklichkeiten. Eine Fassade aus Stein oder Glas ist gebaute Form und kann als Medium Information kommunizieren. Medien werden ihrer Bestimmung um so besser gerecht, je mehr sie sich der Aufmerksamkeit entziehen und wie transparente Fenster hinter der Oberfläche der sinnlichen Wahrnehmung zurücktreten. Als >unwahrnehmbares< Medium ist der architektonische Raum damit eine hintergründige >Wirkungsmacht<, eine Bühne für die Entfaltung von Wirkung, Atmosphäre und Bewegung. Seine physische Wirklichkeit war schon immer durch virtuelle Wirklichkeiten oder Realitäten entgrenzt, die durch Techniken und Technologien der Simulation als künstliche Welten wahrnehmbar und kommunizierbar werden. Dies kann an tradierten Beispielen der gotischen Kathedrale, dem Panorama, den panoptischen Räumen, dem Theater, Kino oder den kontinuierlichen Räumen von der Moderne bis heute aufgezeigt weren. Virtuelle Räume gotischer Glasbilder oder barocker Decken- und Wandbilder im Medium des architektonischen Raumes sind uns geläufig. Die Immersion, das Eintauchen in diese virtuellen Wirklichkeitsspären löst die Wahrnehmung der eigenen körperlichen Präsenz in ihnen aus. Das Potential des virtuellen Raumes der Architektur besteht im Vergleich zu anderen virtuellen Realitäten von Text, Bild oder digitalen Medien in seiner Gebundenheit an die physische, räumliche Reizstruktur, der er die Eindringlichkeit und Komplexität seiner Wirkung verdankt. Es werden unterschiedliche Wechselwirkungen und gemeinsame Entwicklungen von zeitgenössischen Beispielen der Architektur mit den >neuen< Medien aufgezeigt. In der »sensitiven Wand« wird die physische Raumgrenze durch die Integration neuer Techniken und Technologien digitaler, elektronischer Medien etwas extrem Flexibles und Formbares in Interaktion mit dem Benutzer. Der H2O Pavillon (Oosterhuis und NOX, 1997) ist ein Beispiel dafür. Der ausgeprägt polysensorische Immersionsraum steht für die Einheit von digitaler und architektonischer Simulation. Die metaphorische Welt von Höhle und Quelle des Thermalbades Vals (P.Zumthor, 1996) ist die räumliche Reflexion auf die metaphorische Struktur virtueller Räume der >neuen< Medien. Die simulierte Wirklichkeit in den Medien Wasser, Stein und architektonischer Raum produziert schöpferisch den polysensorischen immersiven Zugang in die virtuellen Welten >authentischer< physischer Umgebung. Das >Sichtbare< im Medium Raum der Architektur ist ohne das >Unsichtbare< nicht zu begreifen bzw. das sinnlich Wahrnehmbare nicht ohne das Unwahrnehmbare. Das Erkennen dieser Relation von Form und Medium ermöglicht die Formulierung des neuen Begriffes des medialen Raumes der Architektur, der zur Basis für eine Medientheorie der Architektur wird, als Sichtweise der Entgrenzung des physischen Raumes durch den virtuellen Raum für die subjektive Wahrnehmung, Handlung und Kommunikation. N2 - Within the context of the >new< media, architectonic space must be understood as a medium of communication. This is because it was always a medium, coexisting with other media within a complex media structure. Ensconced as it is within a process of activity and communication, architectonic space is the one medium that facilitates such a close proximity of individuals whose senses and consciousness thus experience a simultaneity of intensity. The architectonic space as an immersive communication medium attained a new dimension in the age of the >new< media, interactive communication availing itself of an increased number of alternative realities. Following the work of N. Luhmann, architecture may be viewed from the perspective of form/medium-difference as a structured space of possibilities within a theory of systems. The space is the medium for forms of architectonic space in the sense that only then does the architecture itself become apparent. The contrary is the case where forms of architectonic space act as media for the apperception of numerous spatial realities. A façade made of stone or glass is built form and as a medium can impart information. The more media abandon their advertence, the better they fulfil their appropriateness and recede like transparent windows behind the surface of animal consciousness. Thus, architectonic space as a >non-perceptible< medium becomes an >agent of power<, a stage for the evolvement of agency, atmosphere and movement/action. Its physical reality was always borderless, not bounded by virtual actualities or realities which are themselves perceivable and communicable as artificial worlds via the techniques and technologies of simulation. Right up to the present day, this is exemplified by artifices such as the Gothic cathedral, the panorama and panoramic spaces, the theatre, the cinema, or the continuous spaces of modernism. Virtual spaces defined by Gothic stained glass or ceiling and wall murals of the Baroque – within the medium of the architectonic space lest we forget – are all familiar to us. Immersion, in the sense of submerging in these virtual sanctums of reality, releases the apperception of each corporeal presence. In comparison to other virtual realities such as text, image or digital media, the potential of the virtual space in architecture arises out of its bondage to the physical and spatial structure of stimuli on which the forcefulness and complexity of its effectiveness depends. Citing examples of contemporary architecture points up various interdependencies between and common evolutions among the >new< media. As new techniques and technologies of digital and electronic media are introduced, the physical spatial border of the >sensitive wall< becomes in terms of interaction increasingly pliable and ductile for the user. The H2O Pavilion (Oosterhuis and NOX, 1997) is just one example. The highly polysensoric immersion space stands for the unity of digital and architectonic simulation. The metaphoric world of caverns and wells of the hot springs at Vals (P. Zumthor, 1996) is the spatial reflexion on the metaphoric structure of virtual spaces as exemplified by the >new< media. The simulated reality in the media water, stone, and architectonic space, enables in an inventive way the polysensoric and immersive access to the virtual worlds of the >authentic< physical environment. That which is >visible< in the medium of architectural space is not understandable without the >invisible<; in other words, the state of sensory perceptibility depends on the existence of the non-perceptible. The recognition of this relation between form and medium allows a new term to be formulated: the >medial space of architecture<. This in turn becomes the basis for a new media theory of architecture itself, a premise defined as a perspective on the debordering of physical space through the virtual one and existing to provide subjective apperception, activity and communication. KW - Architektur KW - Medium KW - Form KW - Bauform KW - Raumwahrnehmung KW - Simulation KW - Imagination KW - Kommunikation KW - Immersion KW - Illusion KW - architektonischer Raum KW - Virtualität KW - architectural space KW - virtuality Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060806-8106 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas A1 - Viteikiene, Milda T1 - Database of Best Practices and Decision Support Web-based System for Construction Innovation N2 - Many construction and facilities management Web sites can be found on the Internet. The interested parties on construction and facilities management Web sites can find databases of best practices, calculators, analyzers, software, expert and decision support systems, neural networks, etc. Technological innovation mainly through changes in the availability of information and communication technology inclusive databases of best practices, calculators, analyzers, software, neural networks, decision support and expert systems that have been provided by a variety of new services developed by the construction and facilities management sectors. Most of all calculators, analyzers, software, decision support and expert systems, neural networks and on-line systems seek to find out how to make the most economic decisions and most of all these decisions are intended only for economic objectives. Alternatives under evaluation have to be evaluated not only from the economic position, but take into consideration qualitative, technical, technological and other characteristics as well. Based on the analysis of the existing calculators, analyzers, information, expert and decision support systems, neural networks and in order to determine most efficient versions of best practices a Decision Support Web-Based System for Construction Innovation (IDSS) was developed by Vilnius Gediminas Technical University. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2173 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas T1 - Civil Engineering Decision Support Systems in Lithuania N2 - Civil engineering decision support systems (construction, building life cycle, refurbishment, total quality management, innovation, etc.) created in Lithuania are described in this paper. The above decision support systems comprise of the following constituent parts: data (database and its management system), models (model base and its management system) and a user interface. Presentation of information in databases may be in conceptual (digital, textual, graphical, photographic, video) and quantitative forms. Quantitative information presented involves criteria systems and subsystems, units of measurement, values and initial weight fully defining the variants provided. The databases were developed providing a multiple criteria analysis of alternatives from economical, infrastructure, technical, technological, qualitative, legislative, social and other perspectives. This information is provided in a user-oriented way. Since the analysis of alternatives is usually performed by taking into account economical, infrastructure, technical, technological, qualitative and other factors, a model-base include models which enable a decision maker to carry out a comprehensive analysis of the variants available and make a proper choice. These systems, related questions and practical case study were analysed the paper. KW - Wissensmanagement KW - Bautechnik KW - Entscheidungsunterstützungssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2579 ER - TY - CHAP A1 - Zarli, Alain A1 - Storer, Graham A1 - Kazi, Abdul Samad (Sami) T1 - Building a Better Future: Major Results from the ICCI Cluster Project N2 - To support research in the building sector and in order to help it move towards a new digital economy, the European Commission under the 5th Framework initiative, especially the IST programme, funded various RTD projects. The opportunity to bring these IST projects together was acknowledged so that stronger links can be created under a clustering umbrella and that, moreover, links of those projects with their RTD environment could be facilitated. This has been the objective of work carried out within the ICCI (IST-2001-33022) Cluster project. This paper introduces the main aims and objectives of the project, and then presents its principal outcomes. In a second part, it synthesises the underlying concepts, technology and tools that will make ICT-based Construction a reality in a near future, and gives recommended actions for the industry, the EC and the Construction ICT R&D in Europe, giving some benefit of this project experience to the three communities. KW - Forschung KW - Europa KW - Informationstechnik KW - Baubetrieb Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1994 ER - TY - CHAP A1 - Zaneldin, Essam T1 - Investigate the Impact of Different Resource Allocation Strategies on the Design of Building Projects Using Simulation N2 - The design of building projects involves several types of resources such as architects, structural engineers, mechanical engineers, electrical engineers, and draftsmen, among others. For design firms to stay in business in this very competitive market, they need to manage their resources in a way that improves productivity and cost effectiveness. This task, however, is not simple and requires thorough analysis of process-level operations, resource use, and productivity. Typically, these operational aspects are the responsibility of the design office manager who assigns available resources to the different design projects to save time and lower design expenses. It is noted that limited studies have been carried out in the literature to model overall organizational operations and behavioral aspects, particularly in firms specialized in the design of building projects. In an effort to simplify the modeling process, a simplified modeling and simulation tool is used in this research. A simulation model representing an actual design office was developed assuming that the office performs designs for small, medium, and large size building projects. The developed model was used to simulate several alternatives and examine various resource assignment strategies. The simulation was conducted over ten years and the resulting productivity and income was measured. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Simulation KW - Bauvorhaben Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1658 ER - TY - CHAP A1 - Yamabe, Yuichiro A1 - Kawamura, Hiroshi A1 - Tani, Akinori T1 - Optimal Design for Recurrent Architecture Network Harmonized with Circulation-type Societies by Applying Genetic Algorithms to Multiagent Model N2 - In this paper, a circulation-type society is expressed by recurrent architecture network described with multi-agent model which consists of the following agents: user, builder, reuse maker, fabricator, waste disposer, material maker and earth bank (see Fig.1). Structural members, materials, resources and monies move among these agents. Each agent has its own rules and aims, regarding structural damages, lifetime, cost reduction, numbers of structural members and structural systems. Reasonable prices of members (fresh, reused, recycled and disposed) can be optimized by GAs in this system considering equal distribution of monies among agents. KW - Mehragentensystem KW - Lernendes System KW - Genetischer Algorithmus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1892 ER - TY - CHAP A1 - Yahiaoui, Azzedine A1 - Hensen, Jan A1 - Soethout, Luc T1 - Developing CORBA-based distributed control and building performance environments by run-time coupling N2 - Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - CORBA Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1347 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Yoshimura, Yutaka T1 - An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps N2 - This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations. KW - Wissensmanagement KW - Stahlbau KW - Wasserkraftwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2564 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Kotani, Jun A1 - Shitani, Tomoaki T1 - A Steel Bridge Design System Architecture using VR-CAD and Web Service-based Multi-Agents N2 - This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system. KW - Mehragentensystem KW - Lernendes System KW - Stahlbrücke KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2146 ER - TY - CHAP A1 - Xie, Haiyan A1 - Issa, Raja A1 - O'Brien, William T1 - Structure of a Formal User Model for Construction Information Retrieval N2 - Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction. KW - Bauwerk KW - Datenmanagement KW - Benutzeroberfläche Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1296 ER - TY - THES A1 - Wöhlecke, Guido T1 - Numerische Auswertung des Einflusses von Baugrundkenngrößen auf die Erstellung von Baugrundmodellen für ein Linienbauwerk T1 - Numeric analysis of influence from subsoilparameters to build subsoilmodels of an linear structure N2 - Die Entstehung des Baugrundes ist geprägt durch die Genese und von anthropogenen Einflüssen. In der Arbeit werden auf der Grundlage isotroper Betrachtungen im Halbraum Prognosen für unbeprobte Bereiche eines linienförmigen Bauwerkes erstellt. Aufbauend auf dem bekannten Algorithmus der Geostatistik werden Berechnungen mit deterministischen Eingangsgrößen durchgeführt. Diese sind in einem Datensatz zusammengefasst und gehen ohne Unterteilung bzw. Bildung von (Homogen)Bereichen in die Schätzungen ein. Zur Anwendung kam dabei die an der Professur Grundbau der Bauhaus-Universität Weimar entwickelte Software GeoStat. Nach der Variogrammanalyse folgten geostatistische Berechnungen mit dem Ordinary und dem Universal Kriging. Der genutzte Datensatz unterlag dabei mehrfachen Modifikationen, um Unterschiede in der Ergebnisbildung beobachten zu können. Die Krigingschätzungen wurden für subjektiv ausgewählte Beprobungspunkte erstellt, die mit Referenzprofilen verglichen werden konnten. Im Ergebnis traten für alle durchgeführten Simulationen erhebliche Abweichungen der berechneten Werte zu den Referenzprofilen auf. Die Verwendung von Datensätzen ohne eine vorherige Bearbeitung und Unterteilung in Homogenbereiche erweist sich als nicht ratsam. Vielmehr ist es notwendig kompliziertere Krigingvarianten einzusetzen bzw. die benutzten Methoden mit anderen Verfahren zu kombinieren. KW - Geostatistik KW - Baugrunduntersuchung KW - Baugrunduntersuchung KW - Geostatistische Interpolation KW - Isotropie KW - Ordinary Kriging KW - Universal Kriging Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6732 ER - TY - THES A1 - Wuttke, Frank T1 - Beitrag zur Standortidentifizierung mit Oberflächenwellen T1 - Site identification using surface waves N2 - In der Dissertation wurden unterschiedliche Methoden zur Standortidentifizierung mit Oberflächenwellen analysiert. Es wurden neue Methoden zur Parameteridentifikation unter Nutzung von Oberflächenwellen vorgeschlagen. Die Ziele der Arbeit können wie folgt definiert werden: a) Die Entwicklung eines geeigneten theoretischen Modells als Grundlage zur Untersuchung des Standortes hinsichtlich vorhandener Bodensteifigkeiten. b) Die Entwicklung einer neuen Inversionsmethodik unter Berücksichtigung aller auftretenden Moden im Oberflächenwellenfeld. Die Erstellung eines Modells des vertikal heterogenen Untergrundes erfolgte im Frequenz-bereichs für beliebig geschichtete Böden, aufbereitet durch weitestgehend analytische Formulierungen. Durch Nutzung beliebiger horizontaler, elastisch-isotroper Schichten konnte die vertikale Heterogenität approximiert werden. Die Definition der Green'schen Funktionen wurde in Form der Reflexions- und Transmissionskoeffizienten durchgeführt. Die Lösung des formulierten Halbraumproblems erfolgte unter Verwendung der Konturintegration. Dazu wurde die Vorgehensweise der bestehenden Lösung des homogenen Halbraums auf das Problem des geschichteten Mediums übertragen. Die daraus sich ergebende Lösung ist in ein Körperwellen- und ein Oberflächenwellenfeld separiert. Der Vorteil dieser analytischen Betrachtungsweise liegt in der eindeutigen Zuordnungsmöglichkeit der erhaltenen Lösungen zu Wellentypen und in der klaren Dispersionscharakteristik der berechneten Modelle. Im Gegensatz dazu liefern numerische Lösungen, wie FEM, immer ein Wellenfeld, in dem die Wellentypen zugeordnet bzw. interpretiert werden müssen. Mit Hilfe der synthetischen Bodenmodellierung wird das Verhalten von geschichteten Böden bei durchlaufenden Oberflächenwellenfeldern simuliert und untersucht. Für die Untersuchung der Profile wurde hauptsächlich die Modale Superposition von Oberflächenwellen und die Wellenzahl-Integration verwendet. Bei der Analyse von Oberflächenwellenfeldern in vorhandenen Medien sind abweichend von den üblichen seismischen Methoden spezielle Untersuchungsmethoden zur Ermittlung der vorhandenen Dispersion notwendig. Zur Durchführung der Dispersionsanalyse wird in geotechnischen Untersuchungen in der Regel das Phasen-Differenzen-Verfahren (SASW) genutzt. Aufgrund der beschränkten Aussagefähigkeit dieses Verfahrens zu auftretenden höheren Moden werden verbesserte Analysemethoden zur experimentellen Auswertung hinzugezogen. Diese Methoden nutzen zur Informationsgewinnung das räumlich ausgedehnte Wellenfeld. Ausgehend von dem Dispersionsverhalten kann die Bodenstruktur mittels inverser Methoden bestimmt werden. Für die gemeinsame Inversion der in den Messungen vorhandenen Moden wurde ein entsprechendes Inversionsverfahren abgeleitet. Als Grundlage der Inversion wurde ein Verfahren des kleinsten Fehlerquadrates gewählt. Der Vorteil hinsichtlich einer effizienten und stabilen Inversion unter Nutzung dieser Methodik überwiegt den Nachteil der lokalen Suche nach dem Fehlerminimum. Zum Erreichen der stabilen und zielgerichteten Inversion wird der Levenberg-Marquardt Algorithmus, zusammen mit der Wichtung der Dispersionsäste entsprechend ihres Anregungsverhaltens in den Dispersionsspektren, eingesetzt. Von Vorteil hat sich innerhalb der Arbeit die gleichzeitige Behandlung von theoretischen und experimentellen Parameterstudien erwiesen, da sich Ergebnisse und Erkenntnisse beider Seiten ergänzten. Eine Interpretation von Felddaten kann damit weitaus sicherer durchgeführt werden. Zusätzlich konnten die erarbeiteten experimentellen und theoretischen Verfahren gegenseitig überprüft werden. N2 - In this thesis various available methods for the site identification with surface waves were analyzed. Some new methods are proposed for the site identification using surface wave characteristics. The objectives of the thesis are as follows: a) To develop an appropriate theoretical model that can work in conjunction with the results obtained from the site inverstigations to precisely identify the actual in situ stiffness profiles. b) To develop a new inversion procedure that enables to inverse all the appearing modes in a wave field. An appropriate model should be able to define the vertical heterogeniety of the subsoil. In this study, the existing solution for the homogeneous half space was extended to the stratified medium. An analytical formulation in the frequency domain was used for this purpose by considering arbitrary horizontal, elastic isotropic layers. The Green’s functions were defined in the matrix formulation in the form of reflection- and transmission coefficients. In this way the analytical considerations could be carried out in a strong mathematical procedure. The solution for the forced excited layered half space was obtained following the contour integration. The solution could be separated in to the body wave and the surface wave fields. The advantage of such an analytical approach lies in the definite allocation of the preserved solutions for wave types and the straight dispersion characteristic of the calculated models. The difference between the analytical and the numerical solutions, such as using FEM, is that the interpretation of the calculated wave field is not required in the former, whereas it is necessary in the latter case. With the help of an analytic wave field calculation the behavior of the propagate surface wave fields in the stratified media could be better simulated and examined. For the investigation of the stiffness profiles primarily the modal superposition by surface waves and the wave number-integration were used. Special surface wave field investigation methods were necessary for the determination of the available dispersion characterisic. For the realization of the dispersion analysis in geoengineering investigations the phase difference method (SASW) is a widely used tool. Since the information on the higher modes are limited, an improved method is proposed to separate the different modes from the experimental data. The proposed method used the spatially spread wave field for the dispersion information. The soil structure can be determined by using various inverse methods. For the joint inversion of all the available modes in the measurements, a suitable inversion procedure was derived. For the stabilization of the inversion procedure, a least square method was chosen. The disadvantage of this efficient method is a local minimum search of the objective function. To achieve a stable and focused inversion procedure the Levenberg-Marquardt algorithm was used. The different dispersion branches multiplied by weighting factors corresponds to the excitation behavior in the dispersion spectra. One particularly advantage in the work is the concurrent treatment of theoretical and experimental parameter studies. According this treatment, the results and cognitions of both sides were complementary. An interpretation of field data could be carried out reliably. In addition, the compiled experimental and theoretical procedures could be checked mutually. KW - Inversionsalgorithmus KW - Inversionstheorie KW - Wellenausbreitung KW - Anomale Dispersion KW - Dispersion KW - Energieübertragung KW - wave propagation KW - inversion procedure KW - inversion theorie KW - wave field dispersion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050708-6874 ER - TY - THES A1 - Winkelmann, Arne T1 - Das Pionierlager Artek. Realität und Utopie in der sowjetischen Architektur der sechziger Jahre T1 - The Pioneer Camp Artek. Reality and Utopia in Soviet Architecture of the 1960's N2 - Das in den 1960er Jahren gebaute, internationale Pionierlager Artek an der Schwarzmeerküste der Krim war das größte Kinderferienlager der Sowjetunion. Als Prestigeobjekt und Vorzeigeinstitution steht Artek für die Architektur der Ära Chruschtschows, des sogenannten „Tauwetters“. Anhand des dialektischen Prinzips von Präsentation und Repräsentation werden vier Aspekte des Lagers untersucht: Architektur, städtebauliche Struktur, Erziehung und Gesamtkunstwerk. Durch dieses Prinzip, das sich aus der Widerspiegelungstheorie ableiten läßt, kann jedem dieser Aspekte die Kongruenz zur ideologischen Zielsetzung und damit die gestalterische Kohärenz der Ferienanlage nachgewiesen werden. In Abgrenzung zur modernen Architektur der westlichen Industrienationen wurde in Artek eine spezifisch „sozialistische Moderne“ für die Sowjetunion und die übrigen Staaten des Ostblocks definiert. Diese war eng verbunden mit dem Städtebau auf der Grundlage von Mikrorayons und der Ausgestaltung von Stadt- und Subzentren. Artek ist mit seiner idealtypischen, architektonischen und städtebaulichen Gestaltung ein Denkmal für die frühere Sowjetunion. N2 - The pioneer camp Artek on the Crimean peninsula at the Black Sea was built in the 1960’s and was the biggest of its kind in the former Soviet Union. As a representative and representing institution Artek is a famous example for the architecture of the Khrushchev-era, the so called “Thaw”. From the dialectical principle of presentation and representation four aspects of the camp are analysed: architecture, urban planning, education and “Gesamtkunstwerk”. Within these principle which is deduced from the “Widerspiegelungstheorie” every aspect shows congruence to its ideological target and with that the coherent design of the camp. Distinguishing to the modern architecture of the western industrial nations in Artek a specific “socialist modernism” for the Soviet Union and the allied countries was defined. This was strictly linked with an urban planning based on Mikrorayons and the design of city-centers and sub-centers. Artek as an ideal design of architecture and urban planning is a monument for the former Soviet Union. KW - Entstalinisierung KW - Pioniererziehung KW - Architektur KW - Krim KW - Sozialistischer Realismus KW - Stahlbetonbau / Skelettbau KW - sozialistische Moderne KW - Artek KW - Junge Pioniere KW - sowjetische Architektur KW - socialist modernism KW - Artek KW - young pioneers KW - soviet architecture Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040817-878 ER - TY - CHAP A1 - Wilson, Ian E. A1 - Damodaran, Leela A1 - Olphert, Wendy T1 - ICT Adoption in the Construction Sector: Education and Training Issues N2 - Organisational and human issues have been highlighted, among other issues (ICT infrastructures, legal and contractual, etc.), as key elements in enhancing the competitiveness of the construction sector. More specifically, the importance of human resources has been recognised, especially training and professional development, in order to cultivate a stable workforce. The paper provides a review of the key training needs for the construction sector with particular reference to the uptake and exploitation of new technologies and working practices, presents an action plan to address learning and training needs, and proposes an eight-stage iterative learning and training methodology. The results will be of particular interest to managers in stakeholder organisations of all sizes throughout the sector, plus academic and research bodies intending to continue construction ICT research. KW - Forschung KW - Informationstechnik KW - Europa KW - Bauindustrie KW - Ausbildung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2013 ER - TY - JOUR A1 - Willenbacher, Heiko A1 - Hübler, Reinhard T1 - Intelligent Link-Management for the Support of Integration in Building Life Cycle N2 - The processes in the life cycle of buildings are characterised by highly distinct teamwork. The integration of all the distributed working participants, by providing an environment, which especially supports the communication and collaboration between the actors, is a fundamental step to improve the efficiency of the involved processes and to reduce the total costs. In this article, a link based modelling approach and its “intelligent” link management is introduced (1). This approach realises an integration environment based on a special building model that acts as a decision support system. The link-based modelling is characterised by the definition and specialisation of links between partial models. These intelligent managed links enable a very flexible and task specific data access and exchange between all the different views and partial models of the participants. KW - Mehragentensystem KW - Lernendes System KW - Bauwerk KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2223 ER - TY - CHAP A1 - Weyhe, Stefan T1 - Qualitätssicherung in der Bauausführung N2 - Baumängel und Bauschäden in der Bauwirtschaft, Auswirkungen von Liberalisierung und Deregulierung auf die Bauqualität, Grundlagen zur Theorie der Bauqualität, die Praxis der baubegleitenden Qualitätssicherung, Kritik an der baubegleitenden Qualitätssicherung, Folgerungen für neue Ansätze KW - Baubetriebslehre KW - Qualität KW - Prozessfähigkeit KW - Bauschaden Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7219 ER - TY - CHAP A1 - Wender, Katrin A1 - Donath, Dirk A1 - Petzold, Frank T1 - Preparation and provision of building information for planning within existing built contexts N2 - A prerequisite for planning within existing built contexts is precise information regarding the building substance, its construction and materials, possible damages and any modifications and additions that may have occurred during its lifetime. Using the information collected in a building survey the user should be able to “explore” the building in virtual form, as well as to assess the information contained with regard to a specific planning aspect. The functionality provided by an information module should cover several levels of information provision ranging from ‘simple retrieval’ of relevant information to the analysis and assessment of stored information with regard to particular question sets. Through the provision of basic functionality at an elementary level and the ability to extend this using plug-ins, the system concept of an open extendable system is upheld. Using this modular approach, different levels of information provision can be provided as required during the planning process. KW - Architektur KW - Verteiltes System KW - Gebäude KW - Nutzungsänderung KW - Altbaumodernisierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1829 ER - TY - CHAP A1 - Wellmann Jelic, Andres A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Distributed computing of failure probabilities for structures in civil engineering N2 - In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server. KW - Konzipieren KW - Bauwerk KW - Verteiltes System KW - Fehler KW - Stochastik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1030 ER - TY - JOUR A1 - Weise, Matthias A1 - Katranuschkov, Peter A1 - Scherer, Raimar J. T1 - Generic Services for the Support of Evolving Building Model Data N2 - Many problems related to data integration in AEC can be better tackled by an approach that takes into account the heterogeneity of tasks, models and applications but does not require continuous consistency of the evolving design data, at each data management operation. Such an approach must incorporate adequate services that can facilitate reintegration of concurrently modified data at reasonably selected coordination points. In this paper we present a set of methods which, used in combination, can achieve that goal. After a description of the principal envisaged cooperative work scenario each of these methods is discussed in detail and current observations drawn from their software realisation are given. Whilst the suggested approach is valid for any EXPRESS-based data model, the practical focus of work has been on facilitating IFC-driven integration. KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - EXPRESS Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2077 ER - TY - CHAP A1 - Ward, Michael A1 - Thorpe, Tony A1 - Price, Andrew T1 - The Re-use of Site Data to Inform Business Processes N2 - The increased implementation of site data capture technologies invariably results in an increase in data warehousing and database technologies to store captured data. However, restricted use of data beyond the initial application could potentially result in a loss of understanding of site processes. This could in turn lead to poor decision making at production, tactical and strategic levels. Concrete usage data have been collected from two piling processes. These data have been analysed and the results highlighted potential improvements that could be made to existing site management and estimating processes. A cost benefit analysis has been used to support decision making at the strategic level where the identified improvements require capital expenditure. KW - Bauwerk KW - Datenmanagement KW - Baustelle KW - Controlling Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1308 ER - TY - THES A1 - Wagner, Sebastian T1 - MANFRED LEHMBRUCK - Ein Architekt der Moderne T1 - MANFRED LEHMBRUCK - An Architect of Modernism N2 - Diese erste umfassende Monographie über den Architekten, Professor und Museumsmann Manfred Lehmbruck (Paris 1913 – Stuttgart 1992) konzentriert sich neben dem Lebensweg und den theoretischen Arbeiten Lehmbrucks zum Museumsbau auf die drei realisierten Museumsbauten: das Reuchlinhaus Pforzheim, das Wilhelm-Lehmbruck-Museum Duisburg und das Federseemuseum Bad Buchau. Aber auch die drei anderen bedeutenden Gebäudeensembles, die Pausa AG Mössingen, die Berufsschule und das Stadtbad Stuttgart-Feuerbach und der Solitär der Mittelschule in Mössingen, alle fertiggestellt in den Sechziger Jahren des letzten Jahrhunderts, werden ausführlich besprochen. Das umfassende Werkverzeichnis im Anhang zeigt deutlich den Einfluß, den seine Lehrer, allen voran Ludwig Mies van der Rohe, aber auch Heinrich Tessenow, Paul Bonatz und Auguste Perret, auf die Architektursprache Lehmbrucks gehabt haben. N2 - This first comprehensive monograph about the architect, professor and specialist for museum architecture Manfred Lehmbruck ( Paris 1913 – Suttgart 1992) focuses on Lehmbruck’s three realized museum buildings: Reuchlinhaus Pforzheim, Wilhelm-Lehmbruck-Museum Duisburg and Federseemuseum Bad Buchau. But also the other three significant building complexes Pausa AG Mössingen, Berufsschule and Public Bath Stuttgart-Feuerbach and the Secondary School in Mössingen, all three of them completed in the sixties of the last century, are extensively discussed. The comprehensive catalog of his buildings clearly shows the influence of his teachers like Ludwig Mies van der Rohe, Heinrich Tessenow, Paul Bonatz and Auguste Perret. Lehmbruck’s biography and his theoretical works on museum architecture complete the picture. KW - Architekturwettbewerb KW - Architektur / Geschichte KW - Architektur / Soziologie KW - Architekturtheorie KW - Funktionalismus KW - Architektur / Gesch KW - Reuchlinhaus KW - Stadtbad Feuerbach KW - Pausa AG KW - Mittelschule Mössingen KW - Reuchlinhaus KW - Public Bath Feuerbach KW - Pausa AG KW - Secondary School Moessingen Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060313-7773 ER - TY - JOUR A1 - Volkova, Viktorija T1 - The analysis of dynamic behaviour of pre-stressed systems under polyharmonic excitations N2 - Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application. KW - Verkehrsplanung KW - Simulation KW - Baukonstruktion KW - Dynamische Belastung KW - Tragwerk / Vorspannung KW - Vorgespannte Konstruktion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2656 ER - TY - JOUR A1 - Vogel, Manfred A1 - Breit, Manfred A1 - Märki, Fabian T1 - Optimization of 4D Process Planning using Genetic Algorithms N2 - The presented work focuses on the presentation of a discrete event simulator which can be used for automated sequencing and optimization of building processes. The sequencing is based on the commonly used component–activity–resource relations taking structural and process constraints into account. For the optimization a genetic algorithm approach was developed, implemented and successfully applied to several real life steel constructions. In this contribution we discuss the application of the discrete event simulator including its optimization capabilities on a 4D process model of a steel structure of an automobile recycling facility. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Genetischer Algorithmus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2360 ER - TY - JOUR A1 - van Treeck, Christoph A1 - Rank, Ernst T1 - Analysis of building structure and topology based on Graph Theory N2 - Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Graphentheorie KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2308 ER - TY - CHAP A1 - van Rooyen, G.C. A1 - Olivier, A. H. T1 - Notes on structural analysis in a distributed collaboratory N2 - The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1451 ER - TY - CHAP A1 - Tsutsumi, Kazutoshi A1 - Hashimoto, Hiromi T1 - A Development of the Building Kansei Information Retrieval System N2 - The purpose of this research is to develop the method to retrieve a building name from the impression of the building. First, the images of the building are registered as database by the questionnaire. Next, the images of the objective building are compared with the degree of matching in image databases, and the building with high synthetic matching degree is retrieved. This system could get a good retrieval result. Moreover, image processing was done, and image databases are trained by neural network from the amount of characteristics of the image, and the retrieval system by image processing was examined. KW - Mehragentensystem KW - Lernendes System KW - Informationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1884 ER - TY - CHAP A1 - Tsou, Jin-Yeu A1 - Lam, Selina A1 - Wong, Wing Kin Gary T1 - Design of Rapidly Assembled Isolation Patient Ward – IT-Supported Collaborative Design Process between Architects and Medical Officers N2 - An important feature of the 2003 SARS outbreak in Canada, Singapore, and Hong Kong was that many health care workers (HCWs) developed SARS after caring for patients with SARS. This has been ascribed to inadequate or ineffective patient isolation. However, it is difficult for dense cities to provide sufficient isolation facilities within a short period of time. This has raised concerns from the public for new strategies in the planning and design of isolation facilities. Considering that SARS or other infectious diseases could seriously damage our society’s development, isolation facilities that could be rapidly and economically constructed with appropriate environmental controls are essential. For this reason, the design team of the Department of Architecture collaborated with a special task force from the Faculty of Medicine, who are the frontline medical officers treating the SARS patients, to design Rapidly Assembled Isolation Patient Wards. Both architecture and medicine are well established disciplines, but they have little in common in terms of the mode of knowledge construction and practice. This induced much intellectual exploration and research interest in conducting this study. The process has provided an important reference for cross disciplinary studies between the architectural and medical domains. KW - Architektur KW - Verteiltes System KW - Krankenhaus KW - SARS Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1748 ER - TY - CHAP A1 - Tonn, Christian A1 - Wolkowicz, Christian A1 - Thurow, Torsten T1 - Plausibility in Architectural Design - DOMEdesign – Software Support for the formal shaping and architect-oriented design of shell structures N2 - Complex gridshell structures used in architecturally ambitious constructions remain as appealing as ever in the public realm. This paper describes the theory and approach behind the software realisation of a tool which helps in finding the affine self-weight geometry of gridshell structures. The software tool DOMEdesign supports the formal design process of lattice and grid shell structures based upon the laws of physics. The computer-aided simulation of suspension models is used to derive structurally favourable forms for domes and arches subject to compression load, based upon the input of simple architectonic parameters. Irregular plans, three-dimensional topography, a choice different kinds of shell lattice structures and the desired height of the dome are examples of design parameters which can be used to modify the architectural design. The provision of data export formats for structural dimensioning and visualisation software enables engineers and planners to use the data in future planning and to communicate the design to the client. KW - Architektur KW - Verteiltes System KW - Schale Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1812 ER - TY - CHAP A1 - Thurow, Torsten A1 - Donath, Dirk T1 - A vision of an adaptive geometry model for computer-assisted building surveying N2 - The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment. KW - Architektur KW - Verteiltes System KW - Bauaufnahme Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1722 ER - TY - THES A1 - Thurow, Torsten T1 - Digitaler Architekturbestand - Untersuchungen zur computergestützten, schrittweisen Erfassung und Abbildung der Geometrie von Gebäuden im Kontext der planungsrelevanten Bauaufnahme T1 - Digital architectural representation - A step-by-step computer-aided approach for the capture and representation of building data in the context of planning-oriented building surveying N2 - Die Arbeit beschreibt ein Konzept zur computergestützten, schrittweisen Erfassung und Abbildung der Geometrie von Gebäuden im Kontext der planungsrelevanten Bauaufnahme. Zunächst wird die Bauaufnahme als Erstellung eines verwendungsspezifischen Modells betrachtet. Anschließend wird der Fokus auf das geometrische Abbild gelegt. Es werden u.a. die Aufmaßtechniken Handaufmaß, Tachymetrie und Photogrammetrie bewertet und gebäudetypische geometrische Abstraktionen aufgelistet. Danach erfolgt eine Aufstellung von Anforderungen an ein computergestütztes Aufmaßsystem, welche mit kommerziellen Lösungen aus dem nichtgeodätischen Bereich verglichen wird. Im Hauptteil wird das zu Beginn genannte Konzept beschrieben. Betrachtet wird die skizzenbasierte Erstellung eines nichtmaßlichen geometrischen Abbildes des Gebäudes in den Frühphasen der Bauaufnahme, seine anschließende schrittweise maßliche Anpassung an das Original und topologische Detaillierung im Zuge des Bauaufmaßes, sowie die Extraktion von Bauteilen und ihren geometrischen Parametern. Zur Vereinfachung der maßlichen Anpassung des geometrischen Abbildes im Aufmaßprozeß werden geometrische Abstraktionen wie Parallelitäten, rechte Winkel usw. genutzt, aber nicht erzwungen. Mit Hilfe der Ausgleichungsrechnung erfolgt eine Zusammenführung der geometrischen Abstraktionen und verschiedener Aufmaßtechniken. Es werden die nötigen Beobachtungsgleichungen und andere relevante Aspekte beschrieben. Gezeigt wird weiter ein Konzept, wie ein nutzerseitig veränderbares Bauwerksmodell mit dem geometrischen Abbild in Bezug gebracht werden kann, wobei aus dem geometrischen Abbild geometrische Parameter des nutzerseitig veränderbaren Bauwerkmodells gewonnen werden können. Ausgesuchte Problematiken der Arbeit wurden prototypisch implementiert und getestet. Hierbei stand die Verbindung der Aufmaßtechniken und geometrischen Abstraktionen im Mittelpunkt. Die geometrischen Ansätze der Arbeit beschränken sich auf planare Oberflächen. N2 - The work describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. To begin with the survey is considered as the creation of a use-specific model. In following steps the focus is transferred to its geometric representation. Various surveying methods including tacheometry and photogrammetry as well as manual measurements are assessed and typical geometric abstractions for buildings identified. A requirements catalogue is then devised for a computer-aided building surveying system and compared with existing commercial solutions from non-geodetic fields. The man part of the paper describes the concept. Starting by examining the sketch-like creation of a non-geometric representation of the building in the initial building surveying phases, the paper goes on to describe how this can be increasingly adapted to fit the geometry of the actual situation and topological detail as the building surveying process continues. Individual buildings elements and their geometric data can be extracted. Simple geometric abstractions such as parallel and orthogonal orientation can be employed where necessary to simplify the adaptation of the geometric representation during the surveying process. Computational adjustment processes are employed to equate geometric data from different abstractions and surveying methods. The necessary conditional equations and other relevant aspects are detailed. A concept is described in which a user-definable building model can be related to a geometric representation, and where geometric parameters of the user’s model can be extracted based upon the geometric representation. Selected aspects of the concept have been implemented and tested as prototypes. The focus here is on the relationship between surveying technique and geometric abstraction. The geometric approach in this paper is limited to planar surfaces. KW - Bauaufnahme KW - Geometrische Modellierung KW - Ausgleichung KW - Ausgleichsrechnung KW - Tachymetrie KW - Photogrammetrie KW - Aufmaß KW - Produktmodell KW - Bauaufnahme KW - Bauwerksmodell KW - Gebäudeabbild KW - Building surveying KW - Building modelling KW - Building representation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041025-1380 ER - TY - JOUR A1 - Takagi, Kousuke A1 - Tani, Akinori A1 - Kawamura, Hiroshi T1 - Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces N2 - Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified. KW - Mehragentensystem KW - Lernendes System KW - Fuzzy-Logik KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2238 ER - TY - CHAP A1 - Taha, M. M. Reda A1 - Sherif, Alaa A1 - Hegger, Josef T1 - A nouvelle approach for predicting the shear cracking angle in RC and PC beams using artificial neural networks N2 - The truss model for predicting shear resistance of reinforced concrete beams has usually been criticized because of its underestimation of the concrete shear strength especially for beams with low shear reinforcement. Two challengers are commonly encountered in any truss model and are responsible for its inaccurate shear strength prediction. First: the cracking angle is usually assumed empirically and second the shear contribution of the arching action is usually neglected. This research introduces a nouvelle approach, by using Artificial Neural Network (ANN) for accurately evaluating the shear cracking angle of reinforced and prestressed concrete beams. The model inputs include the beam geometry, concrete strength, the shear reinforcement ratio and the prestressing stress if any. ... KW - Neuronales Netz KW - Wasserbau KW - Scherung KW - Rissbildung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1071 ER - TY - CHAP A1 - Swaddiwudhipong, Somsak A1 - Tho, Kee Kiat A1 - Liu, Zishun T1 - Material characterization using artificial neural network N2 - Indentation experiments have been carried out over the past century to determine hardness of materials. Modern indentation machines have the capability to continuously monitor load and displacement to high precision and accuracy. In recent years, research interests have focussed on methods to extract material properties from indentation load-displacement curves. Analytical methods to interpret the indentation load-displacement curves are difficult to formulate due to material and geometric nonlinearities as well as complex contact interactions. In the present study, an artificial neural network model was constructed for interpretation of indentation load-displacement curves. Large strain-large deformation finite element analyses were first carried out to simulate indentation experiments. The data from finite element analyses were then used to train the artificial neural network model. The artificial neural network model was able to accurately determine the material properties when presented with load-displacement curves which were not used in the training process. The proposed artificial neural network model is robust and directly relates the characteristics of the indentation loaddisplacement curve to the elasto-plastic material properties. KW - Neuronales Netz KW - Wasserbau KW - Werkstoffprüfung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1550 ER - TY - CHAP A1 - Suzuki, Aketo T1 - Numerical Analysis for Prediction as to Influence of Digging a Tunnel on Groundwater N2 - This paper describes monitoring of the in-valley discharge and underground water level at the place where the tunnel will be constructed and also, the numerical analysis for prediction applying the Tank Model and Linear Filter Method to calculate the prediction. The application of these analyses has actually allowed the change of underground water level to be grasped and more effective information system to be established by comparing the real-time monitoring data with the real-time calculation of prediction. KW - Mobile Computing KW - Funknetz KW - Tunnelbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1133 ER - TY - JOUR A1 - Staub-French, Sheryl T1 - Feature-based Product Modeling for Building Construction N2 - Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2331 ER - TY - CHAP A1 - Soibelman, Lucio A1 - O'Brien, William A1 - Elvin, George T1 - Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design N2 - The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1948 ER - TY - JOUR A1 - Shih, Naai-Jung A1 - Lee, Wen-Pang T1 - Particle Simulation and Evaluation of Personal Exposure to Contaminant Sources in an Elevation Space N2 - An elevator, which figures a small volume, is normally used by everyone for a short period of time and equipped with simple ventilation system..Any contaminant released within it may cause serious problem. This research adapt a fire and smoke simulation software (FDS) into non-fire indoor airflow scario. Differently from previous research, particles are chosen as a risk evalution unit. A personal and multi-personal exposure model is proposed. The model takes the influence of the human thermal boundary, coughing, inhalation, exhalation, standing position, and the fan factor into account. The model is easy-to-use and suitable for the design of elevator system in practice. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Luft KW - Schadstoffkonzentration Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2376 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Bazhan, Andrew A1 - Morozov, Sergey T1 - Distributed STEP-Compliant Platform for Multimodal Collaboration in Architecture, Engineering, and Construction N2 - This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction. KW - Framework KW - API KW - STEP KW - Verteiltes System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2616 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Alekseeva, Elena A1 - Tarlapan, Oleg T1 - Virtual Construction using Map-based Approach N2 - The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Virtuelle Realität KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2447 ER - TY - CHAP A1 - Schäffler, Michael T1 - Fachkunde des Generalunternehmers versus Fachkunde des Fachbetriebes – Praxisbericht zur Ausführung eines GU-Auftrages N2 - Möglichkeiten der Projektrealisierung: Einzelvergabe der Planungs- und Bauaufgaben, Vergabe aller Planungs- und Bauaufgaben an einen Generalunternehmer. Die frühzeitige Einbindung eines erfahrenen und fachkundigen Generalunternehmers gibt dem Auftraggeber die Möglichkeit, bei minimiertem Risiko zu einer wirtschaftlich und bautechnisch optimalen Lösung seiner Bauaufgabe zu kommen. KW - Baubetriebslehre KW - Ausschreibung KW - Öffentlicher Auftrag / Vergabe KW - Generalunternehmer Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7195 ER - TY - THES A1 - Schweigel, Stefan T1 - Aufnahme des Baufortschritts in verteilter Umgebung N2 - Als Folge des hohen Termindrucks während des Bauablaufes, ist es besonders wichtig den Fortschritt eines Bauvorhabens zeitnah zu überwachen. Auf Großbaustellen kann die effektive Kontrolle nicht mehr ohne technische Hilfsmittel durchgeführt werden. Die Arbeit stellt verschiedene Szenarien für die verteilte Fortschrittserfassung vor und untersucht welche Anforderungen an ein System für die verteilte Erfassung gestellt werden. Dazu wird zuerst das bestehende CVS-System analysiert, um anschließend daraus ein Konzept für die Versionierung von Objekten und den automatischen Abgleich von Objektversionen zu entwickeln. Später wird gezeigt, wie dieses Konzept mit Hilfe von C# und dem Microsoft®-.NET-Framework umgesetzt werden kann. KW - Computer Supported Cooperative Work KW - Versionsverwaltung KW - CVS KW - Microsoft dot net KW - computergestützte Baufortschrittskontrolle KW - Versionskontrolle KW - Objektversionierung KW - Versionsabgleich KW - Versionsverschmelzung KW - Computer Aided Progress Monitoring KW - reconciliation KW - merge KW - concurrency control KW - versions Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1534 ER - TY - THES A1 - Scholz-Solbach, Kai T1 - Thermische Effekte der tiefgründigen Bodenstabilisierung mit Branntkalk-Boden-Säulen T1 - Thermal Effects of Deep Soil Stabilization with Lime Columns N2 - Gegenstand der Arbeit ist die Untersuchung der bei der Herstellung von Branntkalk-Boden-Säulen auftretenden thermischen Effekte und ihres Einflusses auf Wasser- und Wasserdampftransporte im Boden. Die Erwärmung beruht vorrangig auf einer chemischen Reaktion, bei der das dem Boden zugemischte Calciumoxid mit Bodenwasser unter Freisetzung von Wärmeenergie zu Calciumhydroxid reagiert. Hierzu wurden zunächst die thermischen Eigenschaften feinkörniger Böden und ihre Beeinflussung durch das Herstellen des Bindemittel-Boden-Gemisches in situ untersucht. Weiterhin wurden Untersuchungen zum zeitlichen Verlauf der chemischen Reaktion und zur Größe der dabei freigesetzten Reaktionswärme vorgenommen. Mit dem Vorhaben, die mit der Säulenherstellung einhergehenden Temperaturfeldänderungen zu erfassen, wurden danach die thermischen Anfangs- und Randbedingungen des Bodens und der Bodenoberfläche untersucht und festgelegt. Anschließend wurden die zeitabhängigen Temperaturfeldänderungen auf der Grundlage der Wärmeübertragung durch Wärmeleitung mit Hilfe des Finite-Elemente-Methode Programms Ansys® 6.1 numerisch simuliert. Das Finite-Elemente-Modell wurde durch die Nachrechnung von Feldversuchen verifiziert. Im Rahmen der Finite-Elemente-Berechnungen wurde die infolge der Hydratation des Branntkalkes stattfindende Erwärmung des Bindemittel-Boden-Gemisches und des angrenzenden Bodens simuliert und hinsichtlich relevanter Einflussgrößen überprüft. Untersucht wurde der Einfluss herstellungsbedingter Faktoren wie Bindemittelkonzentration, Säulendurchmesser und Säulenanordnung sowie der Einfluss natürlicher Faktoren wie Trockendichte und Sättigungsgrad des Bodens. Die mit Hilfe der Finite-Elemente-Methode ermittelten zeitabhängigen, im Boden auftretenden Temperaturgefälle bilden die Grundlage für die Untersuchung der thermisch bedingten Wassertransportvorgänge in der Stabilisierungssäule und deren Umfeld. Zu diesem Zweck wurde die durch die Temperaturfeldbeeinflussung geänderte energetische Situation des Bodenwassers analysiert. Auch nicht-thermische, infolge der Säulenherstellung auftretende Effekte wie die durch den >Stopfeffekt< bedingte lokale Sättigungsänderung und die Beeinflussung des osmotischen Potentials einschließlich der daraus resultierenden Wasserbewegungen wurden berücksichtigt. Alle thermisch verursachten Wasser- und Dampfflüsse bewirken ein Abströmen von Porenwasser aus dem stabilisierten Erdkörper in den umliegenden Boden. Baupraktisch bleiben die durch thermische Einflüsse hervorgerufenen Wassertransportvorgänge aufgrund ihres geringen Betrages jedoch unbedeutend. In abschließenden Temperaturfeldberechnungen wurden die thermischen Bodenkennwerte an die sich zeitlich verändernde Wassersättigung des Bodens angepasst. Anhand der ermittelten Temperaturverläufe wurde aufgezeigt, dass der Einfluss der Sättigungsänderung auf die Berechnungsergebnisse sehr gering ist, und damit die Voraussetzung für die vorangegangene entkoppelte Betrachtung des Wärme- und Massestromes erfüllt ist. Aufgrund dieser Ergebnisse muss der mehrfach in der Literatur zitierte, auch mit der tiefgründigen Bodenstabilisierung in Zusammenhang gebrachte, Einfluss der Erwärmung auf die Verdunstung des Bodenwassers kritisch betrachtet und in Frage gestellt werden. Voraussetzung hierfür ist der Transport von Wasser an die Bodenoberfläche. Nennenswerte, auf Temperatureinflüssen beruhende Wasserbewegungen sind, wie die Berechnungsergebnisse gezeigt haben, nicht zu erwarten. Weitere Untersuchungen zur Festigkeitsentwicklung von Branntkalk-Boden-Säulen und deren Vorhersage sollten sich daher auf die mechanischen Effekte und auf die mineralogisch-chemischen Prozesse, wie die puzzolanischen Reaktionen, und die Möglichkeiten ihrer Prognose konzentrieren. Die Berechnungen haben gezeigt, dass die Temperaturentwicklung in der Stabilisierungssäule im Wesentlichen durch die Bindemittelkonzentration, und ihr Auskühlungsverhalten vorrangig durch ihre geometrischen Abmessungen bestimmt wird. Diese Sachverhalte sind von den Bodenparametern, der für die Stabilisierung in Frage kommenden Böden, weitestgehend unabhängig. Temperaturmessungen stellen daher ein geeignetes Mittel zur Qualitätssicherung bei der Herstellung von Branntkalk-Boden-Säulen dar, mit deren Hilfe sich Inhomogenitäten bei der Bindemittelverteilung oder Störungen beim Hydratationsvorgang (Ablöschen des Branntkalkes) nachweisen lassen. Entsprechende Hilfsmittel wurden angegeben. N2 - Deep stabilization of soil with lime columns causes thermal effects. This is mainly due to the reaction of the unslaked lime with the water in the soil. In this thesis the influence of the thermal effects on the movement of soil water was investigated. In a first step the thermal properties of the stabilized soil in the column and the surrounding soil were analysed. In order to calculate the alteration process of the temperature fields the heat generation coupled to the chemical reaction and the thermal boundary conditions like the distribution of temperature in natural soils were defined. On this base the transient change of the temperature field around the lime columns was computed using the finite element method. The numerical analysis was done with the finite element code ANSYS® 6.1. Due to the high saturation of the stabilized and the surrounding soils only heat transfer by thermal conduction was regarded in the first calculation step. For the present the coupled transport of heat and moisture was neglected as well as the influence of moisture movement on the thermal properties. The model was verified by simulating a large-scale field experiment of the Swedish Geotechnical Institute from which temperature measurements were stated. Very good correlations were achieved between experimental and numerical results. In the next step the influences of the soil parameters, the geometry of the lime columns as well as their arrangement, and the lime concentration on the numerical results were investigated. The computed transient temperature fields and the derived thermal gradients formed the basis for the analysis of temperature-dependent moisture movement in the lime columns and in the surrounding soil. Water and water vapour move due to potential gradients from high to low potential. Therefore, the change of the soil water potential caused by thermal effects was regarded. Also, non-thermal effects such as the change of saturation due to soil compaction and the alteration of the osmotic potential due to dissolution processes were taken into consideration. The calculation results indicated a flow of liquid water and water vapour from the centre of the lime columns towards the surrounding soil. The results also showed that the amount of moisture moved by thermal effects is low and does not contribute to the hardening of the lime columns. In a closing calculation step the change of saturation due to thermal and non-thermal effects was taken into account by adapting the thermal soil parameters to the time-dependent distribution of the soil water. It was shown that the altered saturation has negligible effect on the calculated temperature fields. Therefore, the assumptions made in the first calculation step, concerning the mechanism of heat transfer, were proven true. Based on these results, the often-cited influence of the heat released when unslaked lime reacts with the water in soil has to be called into question, at least in the case of the deep stabilization of soils with lime columns. That would require, for example, the transport of moisture to the soil surface, which according to the results of the calculations is not given. Further investigations into the hardening of lime columns and the prediction of this process should concentrate on mechanical and mineralogical effects such as soil compaction and the pozzolanic reactions. Temperature measurements may serve as a good tool for quality assurance, because the development of heat depends strongly on the lime concentration, while the influence of the soil parameters of the stabilized clayey soils on the change of temperature is very small. Appropriate data were given in this thesis. KW - Bodenverbesserung KW - Kalk-Boden-Säulen KW - Bindemittel-Boden-Säulen KW - tiefgründige Bodenstabilisierung KW - Baugrundverbesserung KW - Lime Columns KW - Deep Soil Stabilization Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050307-3972 ER - TY - JOUR A1 - Schnellenbach-Held, Martina A1 - Hartmann, Markus T1 - Knowledge Based Systems in Distributed Desgin Environments N2 - Today’s building industry not only demands more and more reduced construction time on building site, but also an advanced and mostly construction attendant design phase. Even though there is software available to support design processes in distributed environments, most applications only support simple document based exchange of information. In this paper a knowledge based system is presented to support cooperative, comprehensive design processes in distributed environments. The presented research project is financially supported by the German Research Community (DFG – Deutsche Forschungsgemeinschaft). KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Wissensmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2106 ER - TY - CHAP A1 - Schneider, Mike T1 - Radio Frequency Identification (RFID) Technology and its Applications in the Commercial Construction Industry N2 - This paper is a report of Radio Frequency Identification (RFID) technology and its potential applications in the commercial construction industry. RFID technology offers wireless communication between RFID tags and readers with non line-of-sight readability. These fundamental properties eliminate manual data entry and introduce the potential for automated processes to increase project productivity, construction safety, and project cost efficiency. Construction contractors, owners, and material suppliers that believe technology can further develop methods and processes in construction should feel obligated to participate in RFID studies for the advancement of the construction industry as a whole. KW - RFID KW - Automatische Identifikation KW - Materialflusssteuerung KW - Bauindustrie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1061 ER - TY - CHAP A1 - Schley, Frank A1 - Mejstrik, Marcus A1 - Holz, K.-Peter T1 - Network Based Co-operation Platform for Geotechnical Engineering N2 - This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Geotechnik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1431 ER - TY - THES A1 - Schlegel, Roger T1 - Numerische Berechnung von Mauerwerkstrukturen in homogenen und diskreten Modellierungsstrategien T1 - Numerical computation of masonry structures using homogenious and discrete modelling strategies N2 - Im Zentrum der Arbeit stehen die Entwicklung, Verifikation, Implementierung und Leistungsfähigkeit numerischer Berechnungsmodelle für Mauerwerk im Rahmen der Kontinuums- und Diskontinuumsmechanik. Makromodelle beschreiben das Mauerwerk als verschmiertes Ersatzkontinuum. Mikromodelle berücksichtigen durch die Modellierung der einzelnen Steine und Fugen die Struktur des Mauerwerkverbandes. Soll darüber hinaus der durch die Querdehnungsinteraktion zwischen Stein und Mörtel hervorgerufene heterogene Spannungszustand im Mauerwerk abgebildet werden, so ist ein detailliertes Mikromodell, welches Steine und Fugen in ihren exakten geometrischen Dimensionen berücksichtigt, erforderlich. Demgegenüber steht die vereinfachte Mikromodellierung, bei der die Fugen mit Hilfe von Kontaktalgorithmen beschrieben werden. Im Rahmen der Makromodellierung werden neue räumliche Materialmodelle für verschiedene ein- und mehrschalige Mauerwerkarten hergeleitet. Die vorgestellten Modelle berücksichtigen die Anisotropie der Steifigkeiten, der Festigkeiten sowie des Ver- und Entfestigungsverhaltens. Die numerische Implementation erfolgt mit Hilfe moderner elastoplastischer Algorithmen im Rahmen der impliziten Finite Element Methode in das Programm ANSYS. Innerhalb der detaillierten Mikromodellierung wird ein neues, aus Materialbeschreibungen für Stein, Mörtel sowie deren Verbund bestehendes nichtlineares Berechnungsmodell entwickelt und in das Programm ANSYS implementiert. Die diskontinuumsmechanische Beschreibung von Mauerwerk im Rahmen der vereinfachten Mikromodellierung erfolgt unter Verwendung der expliziten Distinkt Element Methode mit Hilfe der Programme UDEC und 3DEC. An praktischen Beispielen werden Probleme der Tragfähigkeitsbewertung gemauerter Bogenbrücken, Möglichkeiten zur Bewertung vorhandener Rissbildungen und Schädigungen an historischen Mauerwerkstrukturen und Traglastberechnungen an gemauerten Stützen ausgewertet und analysiert. N2 - This dissertation presents the development, verification, implementation and efficiency of numerical models for masonry using continuum mechanics and discontinuum mechanics. For macro modelling three-dimensional elasto-plastic continuum models for regular and irregular, single- and multi-leaf masonry types is developed. The constitutive model is based on the multisurface plasticity theory and includes anisotropic elastic and inelastic behaviour, depending on the orientation of the masonry joints. The yield domain, its hardening law and softening law are defined according to experimental results. On this basis, it is possible to simulate masonry-specific failure and damage mechanisms. For consistent numeric implementation, modern elasto-plastic algorithms were used, including the Return Mapping procedure for local iteration at the integration point level, as well as consistent tangent operators and the Newton-Raphson method. The models were implemented into the implicit Finite-Element code ANSYS. For the detailed micro modelling strategy, a new computational model consist of material models for mortar, stone and bond is developed. For the simplified micro modelling strategy, the explicit distinct element method is used to describe the masonry assembly as a discontinuum. The verification analyses show good concordance between experimental and numerical results for different masonry types. The efficiency of the computation models is finally demonstrated, using sample calculations of large masonry structures. KW - Mauerwerk KW - Numerisches Verfahren KW - Kontinuumsmechanik KW - Modellierung KW - Makrosimulation KW - Mikrosimulation KW - Diskontinuumsmechanik KW - masonry KW - numerical modelling KW - continuum mechanic KW - discontinuum mechanic Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041213-2369 ER - TY - CHAP A1 - Schink, Claus-Jürgen A1 - Koch, Volker T1 - Interdisciplinary Cooperation Modules in Mobile Networks N2 - The contribution describes the didactical integration of wireless access networks for the campus of the University of Karlsruhe in the education of architects and engineers. It focuses on the development of an interdisciplinary communication network to encourage and promote the communication and collaboration between students. The project assumes that significant learning progresses in net-based learning scenarios are based upon the synchronous and asynchronous cooperation between the students themselves. The remote cooperation across borders of disciplines makes high demands on capacity in communicating and cooperating of the involved persons as well as on the supporting tools. Therefore, the collective acquisition of knowledge and cooperation has to be trained intensively during the studies. Based on the design and project oriented cooperation platform netzentwurf.de the authors developed the tools “Jobadmin“ to administrate multidisciplinary workgroups, the “Swarm Knowledge Catalogue“ to collect and store knowledge and “LivingCampus“, an instrument providing basic services for dynamic communication. KW - Architektur KW - Verteiltes System KW - Mobile Computing KW - Rechnernetz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1788 ER -