TY - CHAP A1 - Ötsch, Silke ED - Faschingeder, Kristian ED - Jormakka, Kari ED - Korrek, Norbert ED - Pfeifer, Olaf ED - Zimmermann, Gerd T1 - EXPLAINING JUNKSPACE N2 - Dr. Silke Ötsch is currently working on a research project on the role of architects as intermediaries in financialization founded by the Austrian Research Found (FWF) at the Department of Sociology at the University of Innsbruck. She worked as scientific employee at the Institute of Construction and Design at the Innsbruck University, as lecturer at the Institute for Architecture Theory at the University of Innsbruck (Austria), in the architectural offices of Arets Architekten in Maastricht as well as Haid und Partner in Nürnberg and for Attac Germany. Silke Ötsch received her doctoral degree at the Bauhaus-University Weimar and studied architecture in Weimar and Paris. She published books in the field of architecture theory with the title “Stripping las Vegas” (with K. Jaschke) and “Überwältigen und Schmeicheln”, and articels in the review GAM and others, and published in the field of political economy, among others the book “Das Casino schließen” (together with T. Sauer and P. Wahl) on the financial crisis and “Räume der Offshore-Welt” (together with Celia Di Pauli), which is a publication on concrete spaces of tax havens and offshore centres in Europe and their implications. Her main research interest is globalization and financial architecture. KW - Architekturtheorie KW - Bauhaus KW - Architekturentwicklung Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170329-30676 UR - https://www.uni-weimar.de/de/architektur-und-urbanistik/professuren/theorie-und-geschichte-der-modernen-architektur/bauhaus-kolloquium/ SN - 978-3-86068-417-7 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - THES A1 - Ötsch, Silke T1 - Überwältigen und schmeicheln. Der physiologische, symbolische und ganzheitliche Körper in der Architektur. T1 - Distraction and Pamper. The Physiological, Symbolical and Integrated Body in Architecture. N2 - Der menschliche Körper ist Bezugspunkt von repräsentativen Strömungen der zeitgenössischen Architektur, so lautet die Hauptthese der Dissertation. Bislang wurde das zeitgenössische architekturimmanente Konzept des Körpers größtenteils selektiv und anhand wenig repräsentativer Beispiele von der Kritik behandelt: Ein auf physiologische Gesichtspunkte reduzierter Körper interagiert mit Bauten der klassischen Moderne oder neuen Medientechnologien. Eine umfassende Beschäftigung mit theoretischen Konzepten des Körpers und mit dem Fallbeispiel der zeitgenössischen Hotel- und Kasinoarchitektur in Las Vegas zeigt, dass der Begriff des Körpers komplexer geworden ist, womit der Bezug zum Körper weniger augenfällig erscheint. Der Ansatz der Phänomenologie, Erklärungsmuster durch eine Hinwendung zum Körper zu erhalten wird von verschiedenen Autoren in Frage gestellt. Wenn die Grenzen von Körper bzw. Leib und Umwelt nicht mehr zu bestimmen sind, tauge der Begriff nicht als Letztbegründung. Diese Kritik kann entkräftet werden, wenn auf das Modell der animate form der Philosophin Sheets-Johnstone zurückgegriffen wird. Dieses Konzept führt über Merleau-Pontys Körperbegriff hinaus, der Sheets-Johnstones Aussage nach abstrakt sei. Insbesondere eine Hinwendung zum taktil-kinästhetischen Körper liefert neue Perspektiven. Damit ist es sinnvoll, Architektur in ihrer Beziehung zum Körper zu beurteilen, weil der Körper definierbar und eingrenzbar ist. Anhand des Fallbeispiels der Hotel- und Kasinoarchitektur von Las Vegas kann aufzeigt werden, in welcher Weise sich Planer heute auf den Körper beziehen. Architektur geht in einem Megamedium auf, umgesetzt mit unterschiedlichen Techniken der Umweltgestaltung. Sowohl die Quantität als auch die Qualität der eingesetzten Reize nimmt zu. Dabei werden vor allem Reize eingesetzt, die tendenziell unbewusst wahrgenommen werden. Neben der Abstimmung auf die Sinne und die physische Beschaffenheit wird die symbolische Prägung des Körpers beachtet. Wünsche und Vorstellungen der Nutzer werden über Zielgruppenanalysen ermittelt und finden ihre Entsprechung in semiotischen Architekturelementen. Diese werden so gestaltet, dass der Nutzer den semiotischen Gehalt zugleich sinnlich erfährt. Dieses Konzept des Körpers wird als ganzheitlicher Körper bezeichnet. Aufschlussreich ist ein Vergleich mit Vorstellungen des Körpers vorausgehender Phasen, so z.B. dem Modell, das sich aus Scott Brown, Venturi und Izenours Buch Learning from Las Vegas ableiten lässt, und das sich ebenso aus Texten und Bauten von Zeitgenossen wie Lynch, Norberg-Schulz und Kahn herausarbeiten lässt. Über die Beschäftigung der Architekturtheoretiker mit der Sinneswahrnehmung entsteht ein Bewusstsein für den Einfluss des Symbolischen, das eine subjektive, durch das soziale und kulturelle Umfeld geprägte Wahrnehmung hervorbringt. Der Körper ist eingebettet in symbolische Systeme wie Konventionen und Traditionen, die sein Handeln bestimmen. Dahingegen beziehen sich Vertreter der klassischen Moderne hauptsächlich auf die physiologischen Eigenschaften des Körpers, seine Abmessungen und Bewegungsabläufe, wie Texte, Bauten und Menschmodelle z.B. von Meyer, Neutra, Le Corbusier und Neufert zeigen. Es fällt auf, dass in Texten über Architektur von Las Vegas häufig Begriffe vorkommen, die zugleich zentrale Termini der Phänomenologie sind, wie Atmosphäre und der englische Begriff experience. Es zeigt sich, dass sich die Bedeutungen der philosophischen Termini in der Architektur des Fallbeispiel widerspiegelt. Anders als die vorschnelle Etikettierung der Architekturströmung als „Erlebnisarchitektur“ suggeriert, bezieht sich der Begriff experience auf eine Ausrichtung an der Erfahrung. Diese ist das Resultat der langfristigen Prägung einer konkreten Nutzergruppe durch den in der Umwelt agierenden und durch seine symbolische Prägung beeinflussten Körper. Die Erfahrung impliziert das Erlebnis, als kurzfristige Interaktion von Körper und Umwelt. Am Fallbeispiel kann außerdem gezeigt werden, dass Techniken zur Schaffung von Atmosphären eingesetzt werden. In Anlehnung an den Philosophen Böhme kennzeichnen sich Atmosphären durch eine besondere Nähe von Architektur und Körper. Die Tatsache, dass Architekten gezielt Atmosphären schaffen, die gemeinhin nicht der Strömung der „Erlebnisarchitekur zugerechnet werden, weist darauf hin, dass sich das Leitbild des ganzheitlichen Körpers in unterschiedlichen Kontexten findet. Im Gegensatz zu Thesen Eisenmans oder Jamesons, die eine Entfremdung von Körper und Raum bzw. das Ende des anthropozentrischen Weltbilds feststellen, propagieren Planer wie Jerde die Herstellung von Architektur, die Nutzer und Umwelt in einer übergeordneten Ganzheit vereint. Ganzheit kann aber trotz feinerer Abstimmung auf den Körper nur grenzwertig erreicht werden, da Nutzer nicht vollständig erfasst werden können, sich die Planungen auf bestimmte Zielgruppen beschränken und die Interessen von Planer und Nutzer verschieden sind. N2 - As the main assumption of this thesis says, the human body is an important reference of contemporary architecture. Usually the relation of the human body and architecture is discussed by focussing on a body restricted on its physiological properties interacting with modern architecture or new media technology. The examination of theoretical concepts of the human body accompanied by the case study of the contemporary architecture of Las Vegas shows, that the concept of the body has undergone a change of meaning. Following the thesis, many contemporary planners use the concept of the integrated body. The phenomenological approach which consists in finding explanations by focussing on the human body and its perception is contested by different author because of the impossibility to define the boundaries between the human body and its environment. Consequently the body would not serve as a reference. This objection is invalidate if one considers the concept of animate form of the philosopher Sheets-Johnstone. This concept goes beyond the different notions of the body which Merleau-Ponty proposes as Eigenleib or Fleisch. Especially the focus on the tactile-kinaesthetic body opens up new perspectives. Thence, as the human body can be defined and qualified this reference makes sense. The way in which planners draw attention to the human body is explained by considering the case study of recently built resort architecture in Las Vegas. Architecture forms a part of a megamedium generated by different disciplines of environmental design. Both the quantity and the quality of the stimulus used increase. Planners mainly use stimulus which the user perceives unconsciously. Besides the sensual perception, symbolic qualities are taken into account. The wishes and ideas of a specific target group are determined and converted to architectural elements. These semiotic elements are designed in a way the user can experience the meaning sensuously. This concept of the body is denominated the integrated body. As the comparison with the notion of the body in Scott Brown, Venturi and Izenours book Learning from Las Vegas and in texts and buildings of the author’s contemporaries as Lynch, Norberg-Schulz and Kahn shows, the concept of the body has changed. By concentrating on the bodily perception architects and theoreticians become aware of the influence of the symbolic. The body is imbedded in a system of conventions and traditions affecting its actions. Unlike this, architects of the modern movement mainly refer to the physiological properties of the body, to its size and mechanical properties, as examples of texts, buildings and man models of Meyer, Neutra, Le Corbusier and Neufert show. It is noticeable that journalists often employ terms to describe Las Vegas’ architecture which are usually used in the phenomenological discourse as experience and atmosphere. It can be shown that the meaning of the philosophical notion are reflected in the architecture. As to architecture, experience does not only stands for “Erlebnisarchitektur” (which means architecture of the event) but relates to the long term influence the target group’s user has succeeded by interacting with the physical and symbolic environment. The architectural case study also shows, that planners employ techniques to generate atmospheres. Following the philosopher Böhme atmospheres are situated between the subject and the object and by appealing the senses. Thus the body is very close to architecture. The fact that different architectural movements use techniques to generate atmospheres shows, that the idea of the integrated body can be found in different contexts. The user’s reactions make clear that atmospheric spaces effect people. That is why those spaces are used for political economical aims. The use of the spatial effects does not depend solely on design questions but is directly linked to the political and economical situation. KW - Körper KW - Merleau-Ponty KW - Maurice / Phénoménologie de la perception KW - Phänomenologie KW - Taylorismus KW - Las Vegas KW - Venturi KW - Scott Brown and Partner KW - Hotel- und Kasinoarchitektur KW - Body KW - Phenomenology KW - Las Vegas (Nev.) KW - Architecture Theory KW - Jerde Partnership International Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050727-6926 ER - TY - CHAP A1 - Östman, L. T1 - Knowledge Elicitation through a Pragmatic Inquiry N2 - This is a paper about knowledge in design and how to elicit knowledge from design processes. The paper is a preparation for an empirical study of interaction in the design process. Reasonings of three authors - Schön, Broadbent and Lundequist - on design processes is presented. They all have a pragmatic perspective in common, and regard the process as an activity without a definite form. Design is seen as an activity of creating models of forms and shapes, by addressing expert knowledge ­ in a dialogic way ­ to problematic situations. Due to the pragmatic approach I find the pragmatist Dewey´s understanding of knowledge and elecitation of knowledge appropiate for studying design processes. According to him it is possible to build up objectified descriptions of experiences, also of such, which are based on experiences of emotional and intuitive nature. There need not be a definite border, which separates tacit knowledge from explicit knowledge - when it comes to the question of the possibility of verbal descriptions. Tacit knowledge is possible to articulate within pragmatic thinking. The conclusion is, that it is possible to study the tacit knowledge of design processes, and get some qualitative insights useful for theory building. A study of design processes can look at three different forms of knowledge. It appears as a pre­cognitive understanding of the design situation, as integrated in the design activity - seeing the situation as something known - and in the process of creating something new. KW - Entwurf KW - CAD Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4547 ER - TY - JOUR A1 - Êirinhevsky, V. V. A1 - Dîkhnyak, B. M. A1 - Êirichevsky, R. V. A1 - Êîzub, Y. G. T1 - Determination of the Temperature of Dissipative Warming and Parameters of Fracture in Elastomers with using of Singular Finite Elements N2 - For modeling of singular fields of stresses and deformations in elasters with a crack is offered to use of three-dimesional a special finite element. Weak compessible of elasters is taken into account on the basis of threefold approximation of fields of displacements, deformations and function of volume change. At intensive cyclic loading of the elastomer constructions with a crack it is necessary to take into account warming and large deformations at the crack top. The stress-deformed state elasters with a crack is determined from the decision of a nonlinear problem by a modified method Newton-Kantorovich. Account stress intensity factors for a rectangular plate with a various arrangement of a through crack is executed. Process of development of a surface crack and dissipative warming in prismatic a element of shift is investigated. KW - Elastomer KW - Temperatur KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5471 ER - TY - GEN A1 - Zündel, Jana T1 - Das News-Network Al Jazeera zwischen Globalität und Lokalität T1 - The news network Al Jazeera between globality and locality N2 - Der arabische Fernsehsender Al Jazeera gilt als Phänomen im globalen Nachrichtengeschäft. Gerade das Jahr 2011, als der Arabische Frühling die Nachrichten dominierte, hat die weltweite Relevanz des selbsternannten News-Networks einmal mehr unterstrichen. An der täglichen Berichterstattung und den innovativen Formaten des News-Networks schlagen sich bemerkenswerte ökonomische und medienkulturelle Entwicklungen nieder, die Thema dieser Arbeit sein sollen. Sie befasst sich mit der Konzeption Al-Jazeeras als Unternehmen einerseits und als (Massen-)Medium andererseits, um seinen Beitrag zum Globalisierungsprozess und den damit einhergehenden sozio-kulturellen Veränderungen zu diskutieren. N2 - The Arab TV channel Al Jazeera is a phenomenon to the global news world. Especially in 2011 when global news were dominated by the Arab Spring it has proved its international relevance as self-proclaimed news network. In Al Jazeera's daily work and its innovative programs one can identify economic, medial and cultural changes that are subject of this paper. It analyzes the conception of Al Jazeera as a company on the one hand and as a mass medium on the other hand to discuss its input to the globalization process and the sociocutural changes that came along with it. KW - Al-Jazeera KW - Al-Jazeera English KW - Globalität KW - Lokalität KW - News Network Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111116-15660 ER - TY - CHAP A1 - Zwölfer, Michael A1 - Thomas, Peter A1 - Schink, Claus-Jürgen A1 - Koch, Volker T1 - Life cycle optimized system solutions for densified housing with massive wood technology N2 - The objective of the joint project 'Life cycle optimised system solutions for densified housing with massive wood technology', short form Basys, was the development and application of an open building system for sustainable construction in a virtual enterprise. Four partners coming from building economy and a university institute developed the building system in a comprehensive planning process. By applying massive wood technology, most requirements of densified housing can be met and individual buildings can be produced on demand. KW - Lebenszyklus KW - Holzbau KW - Haus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-980 ER - TY - JOUR A1 - Zrost, Sibylle T1 - Die Herausbildung schöpferischer Fähigkeiten am Bauhaus : eine Betrachtung aus hochschulpädagogischer Sicht N2 - Wissenschaftliches Kolloquium vom 27. bis 29. Juni 1979 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: '60 Jahre Gründung Bauhaus' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 26.1979,4-5/359-362 KW - Bauhaus KW - Kunsterziehung KW - Bauhaus-Kolloquium KW - Weimar KW - 1979 Y1 - 1979 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8948 ER - TY - CHAP A1 - Zolotov, Alexander B. A1 - Akimov, Pavel A1 - Sidorov, Vladimir ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - DISCRETE-CONTINUAL BOUNDARY ELEMENT METHODS OF ANALYSIS FOR TWO-DIMENSIONAL AND THREE-DIMENSIONAL STRUCTURES N2 - The aim of this paper is to present so-called discrete-continual boundary element method (DCBEM) of structural analysis. Its field of application comprises buildings constructions, structures and also parts and components for the residential, commercial and un-inhabitant structures with invariability of physical and geometrical parameters in some dimensions. We should mention here in particular such objects as beams, thin-walled bars, strip foundations, plates, shells, deep beams, high-rise buildings, extensional buildings, pipelines, rails, dams and others. DCBEM comes under group of semianalytical methods. Semianalytical formulations are contemporary mathematical models which currently becoming available for realization due to substantial speed-up of computer productivity. DCBEM is based on the theory of the pseudodifferential boundary equations. Corresponding pseudodifferential operators are discretely approximated using Fourier analysis or wavelet analysis. The main DCBEM advantages against the other methods of the numerical analysis is a double reduction in dimension of the problem (discrete numerical division applied not to the full region of the interest but only to the boundary of the region cross section, as a matter of fact one is solving an one-dimensional problem with the finite step on the boundary area of the region), one has opportunities to carrying out very detailed analysis of the specific chosen zones, simplified initial data preparation, simplistic and adaptive algorithms. There are two methods to define and conduct DCBEM analysis developed – indirect (IDCBEM) and direct (DDCBEM), thus indirect like in boundary element method (BEM) applied and used little bit more than direct. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30419 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Zolotov, Alexander B. A1 - Akimov, Pavel T1 - Discrete-continual Finite Element Method of Analysis for Three-dimensional Curvilinear Structures N2 - This paper is devoted to discrete-continual finite element method (DCFEM) of analysis for three-dimensional curvilinear structures. Operational and variational formulations of the problem in the ring coordinate system are presented. The discrete-continual design model for structures with constant physical and geometrical parameters in longitudinal direction is offered on the basis of so-called curvilinear discrete-continual finite elements. Element coordinate system, approximation of nodal unknowns, construction of element nodal load vector are under consideration. Element system of differential equations is formulated with use of special generalized block-structured stiffness matrix of discrete-continual finite element. Local differential relations are formulated. Resultant multipoint boundary problem for system of ordinary differential equations is given. Method of analytical solution of multipoint boundary problems in structural analysis is offered as well. Its major peculiarities include universality, computer-oriented algorithm involving theory of distributions, computational stability, optimal conditionality of resultant systems, partial Jordan decomposition of matrix of coefficients, eliminating necessity of calculation of root vectors. Brief information concerning developed software is provided. KW - Raumtragwerk KW - Kreis KW - Finite-Elemente-Methode Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3848 ER - TY - INPR A1 - Zollmann, Stefanie A1 - Bimber, Oliver T1 - Imperceptible Calibration for Radiometric Compensation N2 - We present a novel multi-step technique for imperceptible geometry and radiometry calibration of projector-camera systems. Our approach can be used to display geometry and color corrected images on non-optimized surfaces at interactive rates while simultaneously performing a series of invisible structured light projections during runtime. It supports disjoint projector-camera configurations, fast and progressive improvements, as well as real-time correction rates of arbitrary graphical content. The calibration is automatically triggered when mis-registrations between camera, projector and surface are detected. KW - Association for Computing Machinery / Special Interest Group on Graphics KW - CGI KW - Maschinelles Sehen KW - unsichtbare Muster Projektion KW - Projektor-Kamera Systeme KW - Kalibrierung KW - Radiometrische Kompensation KW - imperceptible pattern projection KW - projector-camera systems KW - calibration KW - radiometric compensation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8094 ER - TY - CHAP A1 - Zoller, J. A1 - Maltret, J.-L. A1 - Poutrain, K. T1 - Models generation : from urban simulation to virtual reality N2 - The aim of researches conducted within gamsau about urban simulation, in particular Remus project, is to allow rapid modeling of large and regular urban zones, for purpose of interactive navigation (like VRML) or for realistic rendering (ray-tracing methods). One of problems to be solved in this context is the multiplicity of data formats : inputs come from different sources, and outputs are for heterogeneous systems of visualization. Typically CSG and boundary representation must be generated, treated and converted during building of models. Furthermore, the generated models can be more or less refined, depending on requests and type of use. This paper describes the general context of data models conversion, problems concerning levels of detail and implementation done in Remus, based on object oriented approach. KW - Stadtplanung KW - Objektmodell KW - Virtuelle Realität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4498 ER - TY - THES A1 - Zobel, Oliver Christian T1 - Typologie und Topologie der Pflegebedürftigkeit und -infrastruktur im Freistaat Thüringen; Explorative Analysen zu pflegebedürftigen Menschen und Pflegeinfrastrukturen,ein Beitrag zur empirischen Regionalforschung und Landeskunde N2 - Der Autor, Berater und Gutachter für das Thüringer Ministerium für Soziales und Gesundheit und Mitverfasser der Thüringer Landespflegepläne, systematisiert und analysiert die Struktur und Situation pflegebedürftiger Menschen und deren Inanspruchnahme sozialer Pflegeinfrastrukturen im räumlichen und demographischen Kontext. Im Mittelpunkt dieser regionalwissenschaftlichen Forschungsarbeit stehen räumliche Disparitäten der Versorgungs- und Angebotssicherung sowie bisher kaum betrachtete räumliche Strukturen und Interdependenzen der Pflegebedürftigkeit und Pflegeleistungen. Hierzu wurden vom Autor mehrere regional differenzierte Datenerhebungen aller teilstationären und vollstationären pflegebedürftigen Menschen und der Pflegeinfrastruktureinrichtungen im Freistaat Thüringen durchgeführt.Durch die Integration explorativer Analysemethoden in die empirische Regionalforschung wird die Pflegelandschaft Thüringens für den Zeitraum 1994 bis 2000 dokumentiert und anhand eines relationalen Indikatorensystems die Strukturen und räumlichen Muster der Pflegebedürftigkeit und -infrastruktur, soziodemographischen und raumstrukturellen Einflusskomponenten sowie pflegespezifische Interdependenzen exploriert und analysiert. Ein Ergebnis sind typologische Aussagen zum Alter, zur Pflegeart und -schwere oder Struktur der Pflegeleistungen in einer hochauflösenden topologischen Differenzierung nach regionaler Herkunft pflegebedürftiger Menschen. So hat die Einführung der Pflegeversicherung die Situation der meisten pflegebedürftigen Menschen in Thüringen deutlich verbessert. In der Zeitreihenuntersuchung treten diese Anfangserfolge aber hinter identifizierten Problemlagen aus z.B. sukzessiver Polarisierung der Pflegeleistungen, wachsenden Infrastrukturdisparitäten mit exakt quantifizierbaren Wanderungsbewegungen pflegebedürftiger Menschen zurück. Ein Ergebnis topologischer Analysen sind regionale (Versorgungs-) Disparitäten, die zu nachgewiesenen Wanderungsbewegungen pflegebedürftiger Menschen führen.So resultiert die noch nachweisbare Leistungs- bzw. Funktionsfähigkeit der Pflegelandschaft Thüringens (im Sinne der pflegerischen Grundversorgung einer Teilkaskoversicherung) primär aus noch günstigen Rahmenbedingungen wie dem „selbstverständlich“ erbrachten informellen Pflegeleistungen (der Frauen und Töchter) und nur sekundär (oder kaum) aus der durchaus noch guten finanziellen Situation der Pflegeversicherung. Ferner konnte gezeigt werden, dass wachsende Versorgungsdisparitäten nur anteilig eine Infrastrukturproblematik darstellen.Die Ergebnisse werden im Hinblick auf die entwickelten Methoden und weiteren Untersuchungen diskutiert und im Kontext des theoretischen Teils u.a. zur Entwicklung der Altenhilfe, Pflegeversicherung und sozialen Infrastrukturversorgung betrachtet und vor den Konsequenzen des demographischen Wandels reflektiert. Mit den Untersuchungsergebnissen fordert der Autor, dass Alterung und Schrumpfung der Bevölkerung in Teilräumen als dominante Entwicklung nicht verleugnet werden darf, damit durch eine integrative Gesamtsicht einer auch sozial nachhaltigen Raumentwicklung die pflegespezifische Forderung nach einem möglichst selbstbestimmten und selbständigen Leben (im eigenen Haushalt) gewahrt und das Grundrecht auf Würde auch pflegebedürftiger Menschen gewährleistet bleibt.Dazu wird vorgeschlagen, mit einer modernen Regionalforschung, die durch hochauflösende Datenerfassung, neuen explorativen statistischen Analysemethoden und in Verbindung mit aussagekräftigen Visualisierungsverfahren ein qualifiziertes Monitoring- und Analysesystem für die Raumbeobachtung aufzubauen, um Problemregionen rechzeitig identifizieren und Planungen zeitnah initiieren zu können. KW - Raumforschung KW - empirische Regionalforschung KW - Infrastrukturplanung KW - Disparitäten KW - Demographie KW - Pflegeversicherung KW - Landeskunde Thüringen KW - demographischer Wandel KW - Landespflegeplanung KW - Pflegestatistik KW - Pflegebedarf Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041207-2353 ER - TY - JOUR A1 - Zinsmeister, Annett T1 - Virtual constructions : the standards of utopia N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/109-114 KW - Künstliche Welt KW - Künste KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080318-13540 ER - TY - CHAP A1 - Zimprich, Inga T1 - Körperstreik T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - Feministische Gesundheitsrecherchegruppe KW - Femimismus KW - Gesundheit KW - Macht KW - feministische Gesundheitsrecherche Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42607 UR - https://nocturne-plattform.de/text/korperstreik SP - 91 EP - 102 PB - Nocturne CY - Berlin/Weimar ER - TY - CHAP A1 - Zimmermann, Jürgen A1 - Bartels, Jan-Hendrik ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TREE-BASED METHODS FOR RESOURCE INVESTMENT AND RESOURCE LEVELLING PROBLEMS N2 - The execution of project activities generally requires the use of (renewable) resources like machines, equipment or manpower. The resource allocation problem consists in assigning time intervals to the execution of the project activities while taking into account temporal constraints between activities emanating from technological or organizational requirements and costs incurred by the resource allocation. If the total procurement cost of the different renewable resources has to be minimized we speak of a resource investment problem. If the cost depends on the smoothness of the resource utilization over time the underlying problem is called a resource levelling problem. In this paper we consider a new tree-based enumeration method for solving resource investment and resource levelling problems exploiting some fundamental properties of spanning trees. The enumeration scheme is embedded in a branch-and-bound procedure using a workload-based lower bound and a depth first search. Preliminary computational results show that the proposed procedure is promising for instances with up to 30 activities. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30405 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Zimmermann, Jürgen T1 - Modelle und Verfahren zur Planung von langfristigen Bauprojekten unter Kapitalwertgesichtspunkten N2 - Langfristige Bauprojekte stellen sowohl aus technischer Sicht als auch unter Planungsgesichtspunkten überaus komplexe Herausforderungen dar. Den laufenden Auszahlungen für Löhne, Materialien und fremdbezogene Dienstleistungen stehen dabei erst nach einiger Zeit Fortschrittszahlungen für abgeschlossene Teilprojekte gegenüber. Die Durchführung eines solchen Projekts kann mithin als Investition angesehen werden. Im Gegensatz zu herkömmlichen Investitionen liegen bei Investitionsprojekten die Zeitpunkte der Ein- und Auszahlungen nicht fest, sondern sind Gegenstand der Planung. Zur Lösung des Annahme- bzw. Auswahlproblems bei Investitionsprojekten unter Sicherheit erfreut sich die Kapitalwertmethode breiter Zustimmung. Nach einer Betrachtung bekannter Ansätze zur Maximierung des Kapitalwerts von Investitionsprojekten unter Annahme eines vollkommenen Kapitalmarktes wird aufgezeigt, wie das vorgestellte Modell zur Kapitalwertmaximierung für den Fall beschränkt verfügbarer Ressourcen bzw. eines beschränkten Kreditrahmens angepasst werden kann. Die Bewertung von Investitionsprojekten auf Grundlage des optimalen Projektkapitalwerts setzt die Kenntnis des anzuwendenden Kalkulationszinsfußes und der maximalen Projektdauer voraus. Da diese Größen a priori nicht bekannt sind, entwickeln wir ein Verfahren zur Bestimmung des Kapitalwerts von Investitionsprojekten als Funktion des Kalkulationszinsfußes und der maximalen Projektdauer. Abschließend zeigen wir, wie die erzielten Resultate zur Entscheidungsunterstützung eines Bauunternehmers genutzt werden können. KW - Investitionsplanung KW - Kalkulation KW - Kapitalwertmethode Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3837 ER - TY - JOUR A1 - Zimmermann, Gerd A1 - Korrek, Norbert T1 - Architektur und Macht : 6. Internationales Bauhaus-Kolloquium Weimar 1992, 18.6.-21.6.1992 N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 38.1992,5-6/205-206 KW - Bauhaus KW - Architekturtheorie KW - Kongress KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11249 ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Die Realität des Imaginären : Architektur und das digitale Bild N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/01 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080815-14201 ER - TY - CHAP A1 - Zimmermann, Gerd ED - Faschingeder, Kristian ED - Jormakka, Kari ED - Korrek, Norbert ED - Pfeifer, Olaf ED - Zimmermann, Gerd T1 - DAS KOLLOQUIUM N2 - Geb.1946 in Luckenwalde, nach dem Studium der Architektur in Weimar Promotion 1974 auf dem Gebiet der Architekturtheorie, 1973 bis 1980 Abteilung Theorie und Geschichte der Architektur am Institut für Städtebau und Architektur der Bauakademie in Berlin. Arbeiten zur Architekturpsychologie und Architektursemiotik sowie Beiträge zur empirischen Wirkungsforschung in der Architektur. Ab 1980 Lehrtätigkeit an der Hochschule für Architektur und Bauwesen (HAB) Weimar. 1992 Berufung zum Universitätsprofessor an der HAB für das Fach „Entwerfen und Architekturtheorie“, im gleichen Jahr Wahl zum Rektor der Hochschule, 1996 Wiederwahl für weitere vier Jahre. Publikationen zur Architekturtheorie, Konzeption und Veranstaltung der Internationalen Bauhaus-Kolloquien, internationale Programme mit der WASEDA Universität Tokyo, dem IIT Chicago, seit Mitte der 90er Jahre jährliche Entwurfsakademie in Rom. 2003 Wahl zum Dekan der Fakultät Architektur und 2004 erneute Wahl zum Rektor der Bauhaus-Universität Weimar. KW - Architekturtheorie KW - Bauhaus KW - Architekturentwicklung Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170329-30428 UR - https://www.uni-weimar.de/de/architektur-und-urbanistik/professuren/theorie-und-geschichte-der-modernen-architektur/bauhaus-kolloquium/ SN - 978-3-86068-417-7 PB - Verlag der Bauhaus-Universität CY - Weimar ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Medium Architektur : zur Krise der Entwicklung ; Vorwort zum 9. Internationalen Bauhaus-Kolloquium Weimar 2003 N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,3/1-5 KW - Architektur KW - Medien KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13257 ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Medium Architektur N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,3/8-15 KW - Architektur KW - Medien KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13230 ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Über Symbolformen des "High-Tech" in der Architektur N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/42-46 KW - Architektur KW - High-Tech KW - Spitzentechnologie KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10795 ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Architekturen der Macht N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 38.1992,5-6/213-220 KW - Architektur KW - Macht KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11164 ER - TY - CHAP A1 - Zimmermann, Gerd T1 - Neue Welt, Architektur und die Utopien der Globalisierung N2 - Wissenschaftliches Kolloquium vom 14. bis 16. Oktober 1999 in Weimar an der Bauhaus-Universität zum Thema: ‚global village - Perspektiven der Architektur' T3 - Thesis // Bauhaus-Universität - 46.2000,4-5/9-14 KW - Architektur KW - Globalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 1999 Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-12182 ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Techno-Fiction : Einführungsvortrag N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/3-6 KW - Architektur KW - Technologie KW - Fiktion KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11525 ER - TY - THES A1 - Zimmermann, Christina T1 - Ambiguität im zeitgenössischen Film. Flugversuche : Zusammenfassung N2 - Die Dissertation über „Ambiguität im zeitgenössischen Film – Flugversuche“ folgt der Spur einer populären narrativen Tendenz im Kino – nämlich der Mehrdeutigkeit – und zeichnet ihr dramaturgisches Potential, wie ihre ethischen (bzw. mikropolitischen) Implikationen nach. Um typische Muster in der Wahrnehmung mehrdeutiger Filmerzählungen zu beschreiben, die bereits auf der vorbewussten Ebene der Affekte wirksam sind, greife ich auf Begriffe der Prozessphilosophie Alfred North Whitehead’s zurück und auf ihre neueren Reformulierungen bei Gilles Deleuze und Brian Massumi. Ausgehend von Alejandro González Iñárritu’s "Babel" (2006) begibt sich der Leser im ersten Teil auf einen virtuellen Rundflug durch ausgewählte Filmbeispiele mit einem kulturellen Ankerpunkt im heutigen Japan. Im zweiten Teil beschreibe und reflektiere ich mein methodisches Vorgehen in den ersten Phasen der Stoffentwicklung zu einem suggestiven Spielfilmprojekt, und kontextualisiere es mit Interviews zeitgenössischer Autorenfilmer, die ähnliche Erzählweisen entwickeln. N2 - The PhD dissertation on “Ambiguity in Contemporary Cinema – Attempts in Aviation” traces a prominent narrative tendency in cinema, outlining its dramaturgical potential as well as its ethical (or micropolitical) implications. In order to describe a number of typical patterns in ambiguous film narration that are operative already on the pre-conscious level of affects, I draw on concepts from the process philosophy by Alfred North Whitehead and its more recent reformulations by Gilles Deleuze and Brian Massumi. Departing from Alejandro González Iñárritu’s "Babel" (2006) in Part 1 the reader gets on a virtual flight through carefully chosen film examples with a cultural anchor point in Contemporary Japan. In Part 2 I describe and reflect on methodological questions for the first steps in a script development process for a suggestive screenplay, and relate my own approach to the work of other contemporary filmmakers. KW - Ambiguität KW - Film KW - Dramaturgie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160727-26336 ER - TY - JOUR A1 - Zierold, Sabine T1 - Bild und Raum N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/26 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-13996 ER - TY - JOUR A1 - Zierold, Sabine T1 - Das Virtuelle im Realen : der virtuelle Raum als Entgrenzung des physischen Raumes der Architektur N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/116-123 KW - Raum KW - Architektur KW - Neue Medien KW - Virtuelle Realität KW - Raumwahrnehmung KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080318-13522 ER - TY - THES A1 - Zierold, Sabine T1 - Der mediale Raum der Architektur T1 - The medial space of architecture N2 - Der architektonische Raum wird als ein Medium der Kommunikation im Kontext der >neuen< Medien begriffen, aus der Erkenntnis, dass er schon immer ein Medium war und aus einer komplexen Medienstruktur in Abhängigkeit von anderen Medien besteht. Im Prozess von Handlung und Kommunikation ist der architektonische Raum das Medium, das räumliche Nähe von Individuen über alle Sinne und das Bewusstsein gleichzeitig intensiv ermöglicht. Der architektonische Raum als immersives Kommunikationsmedium erreicht im Zeitalter der >neuen< Medien eine neue Dimension, indem mehr und andere Wirklichkeitsalternativen der Kommunikation zur Verfügung stehen. N. Luhmann folgend, wird die Architektur aus der Sicht der Form/Medium-Differenz systemtheoretisch als strukturierter Möglichkeitsraum betrachtet. Der Raum ist das Medium für Formen des architektonischen Raumes, in dem Architektur überhaupt erst wirksam wird. Umgekehrt sind die Formen des architektonischen Raumes Medien für die Wahrnehmung einer Vielzahl von räumlichen Wirklichkeiten. Eine Fassade aus Stein oder Glas ist gebaute Form und kann als Medium Information kommunizieren. Medien werden ihrer Bestimmung um so besser gerecht, je mehr sie sich der Aufmerksamkeit entziehen und wie transparente Fenster hinter der Oberfläche der sinnlichen Wahrnehmung zurücktreten. Als >unwahrnehmbares< Medium ist der architektonische Raum damit eine hintergründige >Wirkungsmacht<, eine Bühne für die Entfaltung von Wirkung, Atmosphäre und Bewegung. Seine physische Wirklichkeit war schon immer durch virtuelle Wirklichkeiten oder Realitäten entgrenzt, die durch Techniken und Technologien der Simulation als künstliche Welten wahrnehmbar und kommunizierbar werden. Dies kann an tradierten Beispielen der gotischen Kathedrale, dem Panorama, den panoptischen Räumen, dem Theater, Kino oder den kontinuierlichen Räumen von der Moderne bis heute aufgezeigt weren. Virtuelle Räume gotischer Glasbilder oder barocker Decken- und Wandbilder im Medium des architektonischen Raumes sind uns geläufig. Die Immersion, das Eintauchen in diese virtuellen Wirklichkeitsspären löst die Wahrnehmung der eigenen körperlichen Präsenz in ihnen aus. Das Potential des virtuellen Raumes der Architektur besteht im Vergleich zu anderen virtuellen Realitäten von Text, Bild oder digitalen Medien in seiner Gebundenheit an die physische, räumliche Reizstruktur, der er die Eindringlichkeit und Komplexität seiner Wirkung verdankt. Es werden unterschiedliche Wechselwirkungen und gemeinsame Entwicklungen von zeitgenössischen Beispielen der Architektur mit den >neuen< Medien aufgezeigt. In der »sensitiven Wand« wird die physische Raumgrenze durch die Integration neuer Techniken und Technologien digitaler, elektronischer Medien etwas extrem Flexibles und Formbares in Interaktion mit dem Benutzer. Der H2O Pavillon (Oosterhuis und NOX, 1997) ist ein Beispiel dafür. Der ausgeprägt polysensorische Immersionsraum steht für die Einheit von digitaler und architektonischer Simulation. Die metaphorische Welt von Höhle und Quelle des Thermalbades Vals (P.Zumthor, 1996) ist die räumliche Reflexion auf die metaphorische Struktur virtueller Räume der >neuen< Medien. Die simulierte Wirklichkeit in den Medien Wasser, Stein und architektonischer Raum produziert schöpferisch den polysensorischen immersiven Zugang in die virtuellen Welten >authentischer< physischer Umgebung. Das >Sichtbare< im Medium Raum der Architektur ist ohne das >Unsichtbare< nicht zu begreifen bzw. das sinnlich Wahrnehmbare nicht ohne das Unwahrnehmbare. Das Erkennen dieser Relation von Form und Medium ermöglicht die Formulierung des neuen Begriffes des medialen Raumes der Architektur, der zur Basis für eine Medientheorie der Architektur wird, als Sichtweise der Entgrenzung des physischen Raumes durch den virtuellen Raum für die subjektive Wahrnehmung, Handlung und Kommunikation. N2 - Within the context of the >new< media, architectonic space must be understood as a medium of communication. This is because it was always a medium, coexisting with other media within a complex media structure. Ensconced as it is within a process of activity and communication, architectonic space is the one medium that facilitates such a close proximity of individuals whose senses and consciousness thus experience a simultaneity of intensity. The architectonic space as an immersive communication medium attained a new dimension in the age of the >new< media, interactive communication availing itself of an increased number of alternative realities. Following the work of N. Luhmann, architecture may be viewed from the perspective of form/medium-difference as a structured space of possibilities within a theory of systems. The space is the medium for forms of architectonic space in the sense that only then does the architecture itself become apparent. The contrary is the case where forms of architectonic space act as media for the apperception of numerous spatial realities. A façade made of stone or glass is built form and as a medium can impart information. The more media abandon their advertence, the better they fulfil their appropriateness and recede like transparent windows behind the surface of animal consciousness. Thus, architectonic space as a >non-perceptible< medium becomes an >agent of power<, a stage for the evolvement of agency, atmosphere and movement/action. Its physical reality was always borderless, not bounded by virtual actualities or realities which are themselves perceivable and communicable as artificial worlds via the techniques and technologies of simulation. Right up to the present day, this is exemplified by artifices such as the Gothic cathedral, the panorama and panoramic spaces, the theatre, the cinema, or the continuous spaces of modernism. Virtual spaces defined by Gothic stained glass or ceiling and wall murals of the Baroque – within the medium of the architectonic space lest we forget – are all familiar to us. Immersion, in the sense of submerging in these virtual sanctums of reality, releases the apperception of each corporeal presence. In comparison to other virtual realities such as text, image or digital media, the potential of the virtual space in architecture arises out of its bondage to the physical and spatial structure of stimuli on which the forcefulness and complexity of its effectiveness depends. Citing examples of contemporary architecture points up various interdependencies between and common evolutions among the >new< media. As new techniques and technologies of digital and electronic media are introduced, the physical spatial border of the >sensitive wall< becomes in terms of interaction increasingly pliable and ductile for the user. The H2O Pavilion (Oosterhuis and NOX, 1997) is just one example. The highly polysensoric immersion space stands for the unity of digital and architectonic simulation. The metaphoric world of caverns and wells of the hot springs at Vals (P. Zumthor, 1996) is the spatial reflexion on the metaphoric structure of virtual spaces as exemplified by the >new< media. The simulated reality in the media water, stone, and architectonic space, enables in an inventive way the polysensoric and immersive access to the virtual worlds of the >authentic< physical environment. That which is >visible< in the medium of architectural space is not understandable without the >invisible<; in other words, the state of sensory perceptibility depends on the existence of the non-perceptible. The recognition of this relation between form and medium allows a new term to be formulated: the >medial space of architecture<. This in turn becomes the basis for a new media theory of architecture itself, a premise defined as a perspective on the debordering of physical space through the virtual one and existing to provide subjective apperception, activity and communication. KW - Architektur KW - Medium KW - Form KW - Bauform KW - Raumwahrnehmung KW - Simulation KW - Imagination KW - Kommunikation KW - Immersion KW - Illusion KW - architektonischer Raum KW - Virtualität KW - architectural space KW - virtuality Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060806-8106 ER - TY - THES A1 - Ziegler, Frank T1 - Eine formale Beschreibung der Bauauftragsrechnung : Grundlage zur Anpassung und Entwicklung eines Informationssystems N2 - Die fachlichen und organisatorischen Aufgaben der Informationsverarbeitung im Prozeß der Bauauftragsrechnung werden als theoretische Grundlage für die Anpassung und Neukonzeption netzverteilter Informationssysteme formal beschrieben. Hierzu erfolgen Untersuchungen von Methoden, Verfahren, Strukturen und Abläufen sowie der in Bauunternehmen angewendeten Informationssysteme. Grundlage einer Modellierungsmethode sind Abstraktionen von Prozeßschritten und Ereignissen in einer Ereignisgesteuerten Prozeßkette, Entitytypen in einem Entity Relationship Model, Funktionsbäume und Organisationseinheiten sowie deren mögliche Relationen. Mit dieser Methodik werden die Prozesse, Informationsdefinitionen, Funktionen und die Organisationsstruktur einzeln modelliert und Relationen zwischen den Modellelementen gebildet. Aus der fachlichen Auswertung der Modelle und Relationen folgen fachgebietsspezifische Prozeßabläufe und Arbeitsumgebungen. Deren Anwendung wird für ein Customizing vorhandener Informationsysteme und bei einer Neuimplementierung betrachtet. Neben einer umfangreichen fachlichen Problemanalyse leistet die Arbeit einen Beitrag zum methodischen Vorgehen bei Neukonzeption baubetrieblicher Informationssysteme. N2 - The specialized and organizational tasks in the information processing of tendering and contract execution in the construction industry are formaly described as theoretical basis for customizing and redevelopment of a information system was distributed in a network. For this purpose it is essential to examine methodes, procedures, structures and the course of events as well as information systems in a building enterprise. Basis for a methode of modeling are selected abstractions for steps of processes and events in a Event-driven Process Chain, entitytyps in a Entity Relationship Model, trees of functions, units for organisation and there usually relationships. With the help of this methodes the processes, the definitions of informations, the functions and the structures of organisation are separated designed and form relationships between the elements of modeling. The results of the specialized evaluation of the models and relationships are course of events and enviroments for special fields. The application of this results is investigated for a customizing of existing systems and development of a new information system. In addition to a surround specialized analyse of problems the work gives a contribution for methodical procedure and reengineering of information systems in the construction industry. KW - Baubetrieb KW - Kostenrechnung KW - Informationssystem KW - Entity-Relationship-Datenmodell KW - Bauauftragsrechnung KW - Methoden und Verfahren KW - Ablauf KW - Ereignisgesteuerte Prozeßkette KW - Customizing KW - methodes and procedures KW - course of events KW - Event-driven Process Chain Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040319-795 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Liang, Chao A1 - Rabczuk, Timon T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared. KW - Energiespeicherung KW - Druckluft KW - Kaverne KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31726 ER - TY - THES A1 - Zhu, Pengtao T1 - The Variability of the Void Ratio of Sand and its Effect on Settlement and Infinite Slope Stability N2 - The uncertainty of a soil property can significantly affect the physical behavior of soil, so as to influence geotechnical practice. The uncertainty can be expressed by its stochastic parameters, including the mean, the standard deviation, and the spatial correlation length. These stochastic parameters are regarded as constant value in most of the former studies. The main aim of this thesis is to prove whether they are depth-dependent, and to evaluate the effect of this depth-dependent character on both the settlement and the infinite slope stability during rainwater infiltration. A stochastic one-dimensional settlement simulation is carried out using random finite element method with the von Wolffersdorff hypoplastic model, so as to evaluate the effect of stress level on the stochastic parameters of void ratio related parameters of sand. It is found that these stochastic parameters are both stress-dependent and depth-dependent. The non-stationary random field, considering the depth-dependent character of these stochastic parameters, can be generated through the distortion of the stationary random field. The one-dimensional settlement analysis is carried out to evaluation the effect of the depth-dependent character of the stochastic parameters of void ratio on the strain. It is found that the depth-dependent character has low effect on the strain. The deterministic analysis of infinite slope stability during rainwater infiltration is simulated. The transient seepage is carried out using finite difference method, while the steady state seepage is simulated using the analytical solution. The saturated hydraulic conductivity (ks) is taken as the only variable. The results show that the depth-dependent ks has a significant influence on the stability of the slope when the negative flux is high. Without considering the depth-dependent character, can overestimate the factor of safety of the slope. A slope can fail if the depth-dependent character is considered, while it is stable if the depth-dependent character is neglected. The failure time of the slope with a greater depth-dependent ks is earlier during transient infiltration. Meanwhile, the stochastic infinite slope stability analysis during infiltration, is also carried out to highlight the effect of the depth-dependent character of the stochastic parameters of ks. The results show that: the probability of failure is significantly increased if the depth-dependent character of mean is considered, while, it is moderately reduced if the depth-dependent character of the standard deviation is accounted. If the depth-dependent character of both the mean and standard deviation of ks is considered, the depth-dependent mean value plays a dominant influence on the results. Furthermore, the depth-dependent character of the spatial correlation length can slightly reduce the probability of failure. T3 - Schriftenreihe Geotechnik - 29 KW - Bodenunruhe KW - Erdrutsch KW - Versickerung KW - Statistische Analyse KW - soil heterogeneity KW - landslide KW - seepage KW - statistical analysis Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180403-37411 ER - TY - THES A1 - Zhao, Jun-Hua T1 - Multiscale modeling of nanodevices based on carbon nanotubes and polymers T1 - Multiskalige Modellierung von auf Kohlenstoffnanoröhren und Polymeren basierenden Nanobauteilen N2 - This thesis concerns the physical and mechanical interactions on carbon nanotubes and polymers by multiscale modeling. CNTs have attracted considerable interests in view of their unique mechanical, electronic, thermal, optical and structural properties, which enable them to have many potential applications. Carbon nanotube exists in several structure forms, from individual single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) to carbon nanotube bundles and networks. The mechanical properties of SWCNTs and MWCNTs have been extensively studied by continuum modeling and molecular dynamics (MD) simulations in the past decade since the properties could be important in the CNT-based devices. CNT bundles and networks feature outstanding mechanical performance and hierarchical structures and network topologies, which have been taken as a potential saving-energy material. In the synthesis of nanocomposites, the formation of the CNT bundles and networks is a challenge to remain in understanding how to measure and predict the properties of such large systems. Therefore, a mesoscale method such as a coarse-grained (CG) method should be developed to study the nanomechanical characterization of CNT bundles and networks formation. In this thesis, the main contributions can be written as follows: (1) Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. (2) The CG potentials of SWCNTs are established by a molecular mechanics model. (3) The binding energy between two parallel and crossing SWCNTs and MWCNTs is obtained by continuum modeling of the van der Waals interaction between them. Crystalline and amorphous polymers are increasingly used in modern industry as tructural materials due to its important mechanical and physical properties. For crystalline polyethylene (PE), despite its importance and the studies of available MD simulations and continuum models, the link between molecular and continuum descriptions of its mechanical properties is still not well established. For amorphous polymers, the chain length and temperature effect on their elastic and elastic-plastic properties has been reported based on the united-atom (UA) and CG MD imulations in our previous work. However, the effect of the CL and temperature on the failure behavior is not understood well yet. Especially, the failure behavior under shear has been scarcely reported in previous work. Therefore, understanding the molecular origins of macroscopic fracture behavior such as fracture energy is a fundamental scientific challenge. In this thesis, the main contributions can be written as follows: (1) An analytical molecular mechanics model is developed to obtain the size-dependent elastic properties of crystalline PE. (2) We show that the two molecular mechanics models, the stick-spiral and the beam models, predict considerably different mechanical properties of materials based on energy equivalence. The difference between the two models is independent of the materials. (3) The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers are scrutinized using molecular dynamics simulations. Finally, the influence of polymer wrapped two neighbouring SWNTs’ dispersion on their load transfer is investigated by molecular dynamics (MD) simulations, in which the SWNTs' position, the polymer chain length and the temperature on the interaction force is systematically studied. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2014,1 KW - Mehrskalenmodell KW - Kohlenstoff Nanoröhre KW - Polymere KW - Multiscale modeling KW - Carbon nanotubes KW - Polymers Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140130-21078 ER - TY - JOUR A1 - Zhang, Yongzheng A1 - Ren, Huilong T1 - Implicit implementation of the nonlocal operator method: an open source code JF - Engineering with computers N2 - In this paper, we present an open-source code for the first-order and higher-order nonlocal operator method (NOM) including a detailed description of the implementation. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combined with the method of weighed residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. The implementation in this paper is focused on linear elastic solids for sake of conciseness through the NOM can handle more complex nonlinear problems. The NOM can be very flexible and efficient to solve partial differential equations (PDEs), it’s also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Finally, we present some classical benchmark problems including the classical cantilever beam and plate-with-a-hole problem, and we also make an extension of this method to solve complicated problems including phase-field fracture modeling and gradient elasticity material. KW - Strukturmechanik KW - Nonlocal operator method KW - Operator energy functional KW - Implicit KW - Dual-support KW - Variational principle KW - Taylor series expansion KW - Stiffness matrix Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220216-45930 UR - https://link.springer.com/article/10.1007/s00366-021-01537-x VL - 2022 SP - 1 EP - 35 PB - Springer CY - London ER - TY - JOUR A1 - Zhang, Yongzheng T1 - Nonlocal dynamic Kirchhoff plate formulation based on nonlocal operator method JF - Engineering with Computers N2 - In this study, we propose a nonlocal operator method (NOM) for the dynamic analysis of (thin) Kirchhoff plates. The nonlocal Hessian operator is derived based on a second-order Taylor series expansion. The NOM does not require any shape functions and associated derivatives as ’classical’ approaches such as FEM, drastically facilitating the implementation. Furthermore, NOM is higher order continuous, which is exploited for thin plate analysis that requires C1 continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for the time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation. KW - Angewandte Mathematik KW - nonlocal operator method KW - nonlocal Hessian operator KW - operator energy functional KW - dual-support KW - variational principle Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220209-45849 UR - https://link.springer.com/article/10.1007/s00366-021-01587-1 VL - 2022 SP - 1 EP - 35 PB - Springer CY - London ER - TY - THES A1 - Zhang, Yongzheng T1 - A Nonlocal Operator Method for Quasi-static and Dynamic Fracture Modeling N2 - Material failure can be tackled by so-called nonlocal models, which introduce an intrinsic length scale into the formulation and, in the case of material failure, restore the well-posedness of the underlying boundary value problem or initial boundary value problem. Among nonlocal models, peridynamics (PD) has attracted a lot of attention as it allows the natural transition from continuum to discontinue and thus allows modeling of discrete cracks without the need to describe and track the crack topology, which has been a major obstacle in traditional discrete crack approaches. This is achieved by replacing the divergence of the Cauchy stress tensor through an integral over so-called bond forces, which account for the interaction of particles. A quasi-continuum approach is then used to calibrate the material parameters of the bond forces, i.e., equating the PD energy with the energy of a continuum. One major issue for the application of PD to general complex problems is that they are limited to fairly simple material behavior and pure mechanical problems based on explicit time integration. PD has been extended to other applications but losing simultaneously its simplicity and ease in modeling material failure. Furthermore, conventional PD suffers from instability and hourglass modes that require stabilization. It also requires the use of constant horizon sizes, which drastically reduces its computational efficiency. The latter issue was resolved by the so-called dual-horizon peridynamics (DH-PD) formulation and the introduction of the duality of horizons. Within the nonlocal operator method (NOM), the concept of nonlocality is further extended and can be considered a generalization of DH-PD. Combined with the energy functionals of various physical models, the nonlocal forms based on the dual-support concept can be derived. In addition, the variation of the energy functional allows implicit formulations of the nonlocal theory. While traditional integral equations are formulated in an integral domain, the dual-support approaches are based on dual integral domains. One prominent feature of NOM is its compatibility with variational and weighted residual methods. The NOM yields a direct numerical implementation based on the weighted residual method for many physical problems without the need for shape functions. Only the definition of the energy or boundary value problem is needed to drastically facilitate the implementation. The nonlocal operator plays an equivalent role to the derivatives of the shape functions in meshless methods and finite element methods (FEM). Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease by a series of matrix multiplications. In addition, NOM can be used to derive many nonlocal models in strong form. The principal contributions of this dissertation are the implementation and application of NOM, and also the development of approaches for dealing with fractures within the NOM, mostly for dynamic fractures. The primary coverage and results of the dissertation are as follows: -The first/higher-order implicit NOM and explicit NOM, including a detailed description of the implementation, are presented. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combining with the method of weighted residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. For the sake of conciseness, the implementation in this chapter is focused on linear elastic solids only, though the NOM can handle more complex nonlinear problems. An explicit nonlocal operator method for the dynamic analysis of elasticity solid problems is also presented. The explicit NOM avoids the calculation of the tangent stiffness matrix as in the implicit NOM model. The explicit scheme comprises the Verlet-velocity algorithm. The NOM can be very flexible and efficient for solving partial differential equations (PDEs). It's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Several numerical examples are presented to show the capabilities of this method. -A nonlocal operator method for the dynamic analysis of (thin) Kirchhoff plates is proposed. The nonlocal Hessian operator is derived from a second-order Taylor series expansion. NOM is higher-order continuous, which is exploited for thin plate analysis that requires $C^1$ continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation. -A nonlocal fracture modeling is developed and applied to the simulation of quasi-static and dynamic fractures using the NOM. The phase field's nonlocal weak and associated strong forms are derived from a variational principle. The NOM requires only the definition of energy. We present both a nonlocal implicit phase field model and a nonlocal explicit phase field model for fracture; the first approach is better suited for quasi-static fracture problems, while the key application of the latter one is dynamic fracture. To demonstrate the performance of the underlying approach, several benchmark examples for quasi-static and dynamic fracture are solved. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,9 KW - Variationsprinzip KW - Partial Differential Equations KW - Taylor Series Expansion KW - Peridynamics KW - Variational principle KW - Phase field method KW - Peridynamik KW - Phasenfeldmodell KW - Partielle Differentialgleichung KW - Nichtlokale Operatormethode Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221026-47321 ER - TY - THES A1 - Zhang, Rui T1 - Staatsverständnis und Unternehmensentwicklung am Beispiel chinesischer Buchdruckunternehmen N2 - In der Arbeit wurde eine Methode für eine kulturübergreifende Vergleichsstudie zwischen China und dem Westen erarbeitet. Diese Methode ermöglicht Unternehmensentwicklung in China aus dem eignen historischen Zusammenhang zu verstehen, statt nur aus einem rein theoretischen Blickwinkel. Weil heutige wissenschaftliche Theorien meist aus der westlichen Kultur stammen und mit Wertvorstellungen sowie mit Begriffen aus dem westlichen Kulturkreis verbunden sind, müssen sie im historischen Kontext des westlichen Kulturkreises betrachtet werden. Im ersten Teil der Arbeit wird der westliche moderne Staat als Untersuchungsbegriff herangezogen, seine Entstehungsbedingungen und seine Verwendungsart und -weise, besonders wie er die ökonomische Theorie und die Praxis im Westen beeinflusst, dabei spielt das moderne Staatsprinzip eine wichtige Rolle. Die Neue Institutionenökonomik dient als theoretischer Referenzrahmen für diese Arbeit. Mittels einer theoretischen Erweiterung mit dem westlichen modernen Staatsverständnis werden wichtige westliche konstitutionelle Institutionen analysiert, da sie die Handlungsrechte und -pflichten der Bürger sowie die Bildung der kapitalistischen Unternehmung beeinflussen. Im zweiten Teil der Arbeit wird das chinesische Staatsverständnis analysiert – vom traditionellen „Tianxia“ zum „modernen“ Staat. Mithilfe abgeleiteter Kriterien wird die chinesische Unternehmensentwicklung in drei zeitlichen Querschnittsphasen betrachtet, wie sich chinesische Unternehmen vom traditionellen bis zum „modernen“ entwickelten. Als Fallbeispiel werden chinesische Buchdruckunternehmen herangezogen. Zuerst wird das Buchdrucksystem sowie seine Veränderungen in drei Zeitphase betrachtet. Dabei wird auf die Aspekte Buchdruckorganisation, staatliche Verwaltung, wie Zensur und Urheberrecht sowie Lehrmaterial fokussiert, die für die Buchdruckunternehmensentwicklung von Bedeutung sind und ein System darstellen. Aus Mikrosicht werden drei Buchdruckunternehmen in den Zeitphasen analysiert. Im Ergebnis der Arbeit werden Schlussfolgerungen abgeleitet, bspw. dass Modernisierung als Aktualisierung verstanden werden sollte, aber nicht als Zerstörung. KW - Unternehmen KW - NIÖ KW - Staat KW - China KW - Tradition KW - Moderne KW - Buchdruck KW - Wirtschaft KW - Kulturkreis Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20161205-27215 ER - TY - JOUR A1 - Zhang, Chao A1 - Hao, Xiao-Li A1 - Wang, Cuixia A1 - Wei, Ning A1 - Rabczuk, Timon T1 - Thermal conductivity of graphene nanoribbons under shear deformation: A molecular dynamics simulation JF - Scientific Reports N2 - Tensile strain and compress strain can greatly affect the thermal conductivity of graphene nanoribbons (GNRs). However, the effect of GNRs under shear strain, which is also one of the main strain effect, has not been studied systematically yet. In this work, we employ reverse nonequilibrium molecular dynamics (RNEMD) to the systematical study of the thermal conductivity of GNRs (with model size of 4 nm × 15 nm) under the shear strain. Our studies show that the thermal conductivity of GNRs is not sensitive to the shear strain, and the thermal conductivity decreases only 12–16% before the pristine structure is broken. Furthermore, the phonon frequency and the change of the micro-structure of GNRs, such as band angel and bond length, are analyzed to explore the tendency of thermal conductivity. The results show that the main influence of shear strain is on the in-plane phonon density of states (PDOS), whose G band (higher frequency peaks) moved to the low frequency, thus the thermal conductivity is decreased. The unique thermal properties of GNRs under shear strains suggest their great potentials for graphene nanodevices and great potentials in the thermal managements and thermoelectric applications. KW - Wärmeleitfähigkeit KW - Graphen KW - Schubspannung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31718 ER - TY - THES A1 - ZHANG, CHAO T1 - Crack Identification using Dynamic Extended Finite Element Method and Thermal Conductivity Engineering for Nanomaterials N2 - Identification of flaws in structures is a critical element in the management of maintenance and quality assurance processes in engineering. Nondestructive testing (NDT) techniques based on a wide range of physical principles have been developed and are used in common practice for structural health monitoring. However, basic NDT techniques are usually limited in their ability to provide the accurate information on locations, dimensions and shapes of flaws. One alternative to extract additional information from the results of NDT is to append it with a computational model that provides detailed analysis of the physical process involved and enables the accurate identification of the flaw parameters. The aim here is to develop the strategies to uniquely identify cracks in two-dimensional 2D) structures under dynamic loadings. A local NDT technique combined eXtended Finite Element Method (XFEM) with dynamic loading in order to identify the cracks in the structures quickly and accurately is developed in this dissertation. The Newmark-b time integration method with Rayleigh damping is used for the time integration. We apply Nelder-Mead (NM)and Quasi-Newton (QN) methods for identifying the crack tip in plate. The inverse problem is solved iteratively, in which XFEM is used for solving the forward problem in each iteration. For a timeharmonic excitation with a single frequency and a short-duration signal measured along part of the external boundary, the crack is detected through the solution of an inverse time-dependent problem. Compared to the static load, we show that the dynamic loads are more effective for crack detection problems. Moreover, we tested different dynamic loads and find that NM method works more efficient under the harmonic load than the pounding load while the QN method achieves almost the same results for both load types. A global strategy, Multilevel Coordinate Search (MCS) with XFEM (XFEM-MCS) methodology under the dynamic electric load, to detect multiple cracks in 2D piezoelectric plates is proposed in this dissertation. The Newmark-b method is employed for the time integration and in each iteration the forward problem is solved by XFEM for various cracks. The objective functional is minimized by using a global search algorithm MCS. The test problems show that the XFEM-MCS algorithm under the dynamic electric load can be effectively employed for multiple cracks detection in piezoelectric materials, and it proves to be robust in identifying defects in piezoelectric structures. Fiber-reinforced composites (FRCs) are extensively applied in practical engineering since they have high stiffness and strength. Experiments reveal a so-called interphase zone, i.e. the space between the outside interface of the fiber and the inside interface of the matrix. The interphase strength between the fiber and the matrix strongly affects the mechanical properties as a result of the large ratio of interface/volume. For the purpose of understanding the mechanical properties of FRCs with functionally graded interphase (FGI), a closed-form expression of the interface strength between a fiber and a matrix is obtained in this dissertation using a continuum modeling approach according to the ver derWaals (vdW) forces. Based on the interatomic potential, we develop a new modified nonlinear cohesive law, which is applied to study the interface delamination of FRCs with FGI under different loadings. The analytical solutions show that the delamination behavior strongly depends on the interphase thickness, the fiber radius, the Young’s moduli and Poisson’s ratios of the fiber and the matrix. Thermal conductivity is the property of a material to conduct heat. With the development and deep research of 2D materials, especially graphene and molybdenum disulfide (MoS2), the thermal conductivity of 2D materials attracts wide attentions. The thermal conductivity of graphene nanoribbons (GNRs) is found to appear a tendency of decreasing under tensile strain by classical molecular dynamics (MD) simulations. Hence, the strain effects of graphene can play a key role in the continuous tunability and applicability of its thermal conductivity property at nanoscale, and the dissipation of thermal conductivity is an obstacle for the applications of thermal management. Up to now, the thermal conductivity of graphene under shear deformation has not been investigated yet. From a practical point of view, good thermal managements of GNRs have significantly potential applications of future GNR-based thermal nanodevices, which can greatly improve performances of the nanosized devices due to heat dissipations. Meanwhile, graphene is a thin membrane structure, it is also important to understand the wrinkling behavior under shear deformation. MoS2 exists in the stable semiconducting 1H phase (1H-MoS2) while the metallic 1T phase (1T-MoS2) is unstable at ambient conditions. As it’s well known that much attention has been focused on studying the nonlinear optical properties of the 1H-MoS2. In a very recent research, the 1T-type monolayer crystals of TMDCs, MX2 (MoS2, WS2 ...) was reported having an intrinsic in-plane negative Poisson’s ratio. Luckily, nearly at the same time, unprecedented long-term (>3months) air stability of the 1T-MoS2 can be achieved by using the donor lithium hydride (LiH). Therefore, it’s very important to study the thermal conductivity of 1T-MoS2. The thermal conductivity of graphene under shear strain is systematically studied in this dissertation by MD simulations. The results show that, in contrast to the dramatic decrease of thermal conductivity of graphene under uniaxial tensile, the thermal conductivity of graphene is not sensitive to the shear strain, and the thermal conductivity decreases only 12-16%. The wrinkle evolves when the shear strain is around 5%-10%, but the thermal conductivity barely changes. The thermal conductivities of single-layer 1H-MoS2(1H-SLMoS2) and single-layer 1T-MoS2 (1T-SLMoS2) with different sample sizes, temperatures and strain rates have been studied systematically in this dissertation. We find that the thermal conductivities of 1H-SLMoS2 and 1T-SLMoS2 in both the armchair and the zigzag directions increase with the increasing of the sample length, while the increase of the width of the sample has minor effect on the thermal conductions of these two structures. The thermal conductivity of 1HSLMoS2 is smaller than that of 1T-SLMoS2 under size effect. Furthermore, the temperature effect results show that the thermal conductivities of both 1H-SLMoS2 and 1T-SLMoS2 decrease with the increasing of the temperature. The thermal conductivities of 1HSLMoS2 and 1T-SLMoS2 are nearly the same (difference <6%) in both of the chiral orientations under corresponding temperatures, especially in the armchair direction (difference <2.8%). Moreover, we find that the strain effects on the thermal conductivity of 1HSLMoS2 and 1T-SLMoS2 are different. More specifically, the thermal conductivity decreases with the increasing tensile strain rate for 1T-SLMoS2, while fluctuates with the growth of the strain for 1HSLMoS2. Finally, we find that the thermal conductivity of same sized 1H-SLMoS2 is similar with that of the strained 1H-SLMoS2 structure. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2018,6 KW - crack KW - Wärmeleitfähigkeit KW - crack identification KW - thermal conductivity Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190119-38478 ER - TY - JOUR A1 - Zhak, S. V. A1 - Sidorenko, V. S. T1 - Optimized Models of Modes Choice for Displacement of technical Systems Objects N2 - The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated. KW - Modellierung KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5347 ER - TY - CHAP A1 - Zentner, Frank T1 - Einsatz internetbasierter Projektplattformen im Bereich der Bauausführung - "Digitales Bautagebuch" N2 - Der Einsatz internetbasierter Projektplattformen in der Bauausführung wurde bisher kaum thematisiert. Die typischen Vorteile des Einsatzes solcher Werkzeuge, wie etwa die Unterstützung kooperativer, geographisch und zeitlich verteilter Prozesse, scheinen für diesen Einsatzbereich nicht so offensichtlich zu sein wie für den Bereich der Gebäudeplanung. Vor dem Hintergrund der anhaltend problematischen Situation der Bauwirtschaft und der Tatsache, dass im Bereich der Bauausführung oftmals die wesentlichen Ursachen für einen unplanmäßigen Ablauf von Bauprojekten oder ein Verfehlen von Kosten-, Termin- oder Qualitätszielen zu finden sind, kommt diesen Anwendungen eine große Bedeutung zu. Im Rahmen eines größeren Forschungsprojektes des BMWi (TK3 GIT Siegen / Projektträger PTJ-BEO) wurde unter dem Arbeitstitel >Digitales Bautagebuch< ein ausführungsorientiertes Modul für eine schon in den Planungsphasen des Projektes eingesetzte Projektplattform entwickelt. Dabei wurde projektbegleitend eine Umgebung implementiert, welche sowohl die Bauleitung bei ihrer täglichen Arbeit unterstützt als auch Entscheidungsträgern und anderen Projektbeteiligten einen schnellen Überblick über den Stand der Arbeiten ermöglicht. Dieser Beitrag setzt sich mit dem Einsatz internetbasierter Projektplattformen im Bereich der Bauausführung auseinander und beschreibt deren Möglichkeiten unter Einbringung der Erfahrungen aus der Anwendung im Bauprojekt TK3 GIT Siegen. KW - Digitalisierung KW - Kooperatives Informationssystem KW - Projektmanagement KW - Internet KW - Kooperatives Arbeiten KW - anforderungsorientierte Projektabwicklung KW - internetbasierte Projektplattform KW - Digitales Bautagebuch Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3822 ER - TY - THES A1 - Zellmann, Hans-Dieter T1 - Metaphosphat – modifizierte Silikatbinder als Basis säurebeständiger Beschichtungsmaterialien T1 - Metaphosphate modified silica-binder for acid resistant coating materials N2 - Mörtel basierend auf erhärtetem Wasserglas als Binder weisen eine ausgesprochen gute Beständigkeit im Kontakt mit stark sauren Medien auf; unzureichend hingegen ist die che-mische Beständigkeit im Kontakt mit alkalischen bis schwachsauren Medien. Ziel der Un-tersuchungen ist eine Verbesserung der Wasserbeständigkeit von Natriumsilikatbindern durch gezielte chemische Modifikation mit verschiedenen Metaphosphaten. Durch eine systematische Charakterisierung der Zusammensetzung und des strukturellen Aufbaus der Binder werden dabei die Ursachen der bindertypischen Eigenschaften aufgeklärt. Eine Modifikation der Natriumsilikatlösung mit Natriumtrimetaphosphat hat eine Erhöhung des Kondensationsgrades und eine verbesserte mechanische Beständigkeit des verfestig-ten Natriumsilikatbinders zur Folge. Durch die reaktive Bindung der Basizität der Natriumsi-likatlösung beim Abbau der Metaphosphatstruktur wird die Wasserbeständigkeit mit Natri-umtrimetaphosphat modifizierter Natriumsilikatmörtel erhöht. Die gute Beständigkeit im Kontakt mit hochkonzentrierter Schwefelsäure bleibt nahezu unverändert erhalten. Eine Modifikation der Natriumsilikatlösung mit Aluminiumtetrametaphosphat führt durch Reaktion beider Komponenten miteinander zur Bildung eines alumosilikatischen Netzwer-kes. Das alumosilikatische Netzwerk des mit Aluminiumtetrametaphosphat modifizierten Natriumsilikatbinders ist auch in einer stark alkalischen Natriumhydroxidlösung beständig. Die gute Beständigkeit des Binders im Kontakt mit hochkonzentrierter Schwefelsäure bleibt trotz des Aluminates im Bindernetzwerk erhalten. N2 - Mortars based on hardened water glass as binding agent present a very good resistance in contact with strongly acid fluids. Insufficient, however, is the chemical resistance in contact with alkaline to weakly acid fluids. Aim of the investigations is an improvement of the water resistance of sodium silicate binders by specific chemical modifications through various metaphosphates. Thereby the causes of the binder specific properties are defined by a systematic characterization of the composition and of the structure of the binders. A modification of the sodium silicate solution by sodium trimetaphosphate produces an in-crease of the condensation degree and an improved mechanical resistance of the solidified sodium silicate binder. The water resistance of sodium silicate mortars modified by sodium trimetaphosphate is increased by the reactive binding of the basicity of the sodium silicate solution during the reduction of the metaphosphate structure. The good resistance in con-tact with highly concentrated sulphuric acid is kept nearly unchanged. A modification of the sodium silicate solution by aluminium tetrametaphosphate produces due to the reaction of both components the formation of an aluminosilicate network. The aluminosilicate network of the sodium silicate binder modified by aluminium tetrameta-phosphate also remains resistant in a strongly alkaline sodium hydroxide solution. The good resistance of the binder in contact with highly concentrated sulphuric acid is main-tained despite the aluminate in the binder network. KW - Wasserglas KW - Mörtel KW - Metaphosphat KW - säurefeste Beschichtungen KW - water-glass KW - metaphosphate KW - motars KW - acid resistant coating material Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081127-14385 ER - TY - CHAP A1 - Zeiser, Andreas A1 - Dahmen, W. A1 - Rohwedder, T. A1 - Schneider, R. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE EIGENVALUE COMPUTATION FOR ELLIPTIC OPERATORS N2 - We present recent developments of adaptive wavelet solvers for elliptic eigenvalue problems. We describe the underlying abstract iteration scheme of the preconditioned perturbed iteration. We apply the iteration to a simple model problem in order to identify the main ideas which a numerical realization of the abstract scheme is based upon. This indicates how these concepts carry over to wavelet discretizations. Finally we present numerical results for the Poisson eigenvalue problem on an L-shaped domain. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-29042 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - THES A1 - Zeh, Rainer T1 - Die Zugfestigkeit bindiger Böden als Kriterium der Rissgefährdung mineralischer Oberflächenabdichtungen T1 - The tensile strength of cohesive soils as cracking criteria of mineral cover linings N2 - Oberflächenabdichtungen von Deponien sind in ihrer langfristigen Funktion häufig durch eine austrocknungsbedingter Rissbildung der mineralischen Dichtungskomponente gefährdet. Als Ursachen gelten insbesondere das standortspezifische Klima mit den stark schwankenden Randbedingungen (Niederschlag, Temperatur), Pflanzen und Tiere sowie auch ein ungeeigneter Systemaufbau. Durch einen Wasserentzug treten Schrumpfungsprozesse in der mineralischen Dichtung auf welche über negative Dehnungen zu Dehnungsbrüchen und damit zu einer Rissbildung führen. Für die Beanspruchbarkeit eines Dichtungsmaterials bei Wasserentzug sind insbesondere dessen Schrumpfverhalten und dessen Zugfestigkeit von Bedeutung. Beide Eigenschaften wurden durch eigens konzipierte Laborversuche beispielhaft an zwei typischen Dichtungsböden untersucht. Die Ergebnisse zeigen eine große Abhängigkeit von der Wasserspannung sowie von der Bodenstruktur. Für die Zugfestigkeit und dem daraus abgeleiteten Dehnungsmodul gilt z. B. jeweils eine eindeutige Zunahme mit Zunahme der Wasserspannungen. Mit Hilfe der Ergebnisse aus den Laborversuchen sowie numerischen Berechnungen des Was-serhaushaltes und der vorherrschenden Spannungen kann eine erste Rissgefährdungsabschätzung für mineralische Dichtungen in Oberflächenabdichtungen abgeleitet und angewandt werden. Weitere Erläuterungen z. B. zu den Eigenschaften und der Teilsättigung bindiger Böden, analytische Zugfestigkeitsberechnungen oder Empfehlungen zum Entwurf und der Herstellung von Oberflächenabdichtungen ergänzen die Arbeit. N2 - The long-term function of cover lining systems of landfills is endangered by desiccation and cracking of the compacted clay liner. The specific climate at the landfill location with its varying conditions (precipitation, temperature), plants and animals or also an inappropriate cover lining system are the causes of these phenomena. Dewatering and desiccation of compacted clay liners produce negative strains and after that strain rupture or cracking. The shrinkage behaviour and the tensile strength of a cover lining material are very important for its capacity. Both characteristics were examined by self-designed laboratory tests which were conducted on two typical cover lining materials. The results show a strong dependency on the suction and on the soil structure. The tensile strength as well as the derived E-modulus increase with increasing suction for example. A first estimation of cracking risk in compacted clay liners of cover lining systems can be derived and used by the presented laboratory test results, numeric calculations of the water balance and the predominant stresses. Further explanations as e. g. the characteristics and unsaturation of cohesive soils, analytic calculations of the tensile strength or recommendations to the design and the production of cover lining systems complete the thesis. KW - Deponiebau KW - Zugfestigkeit KW - Rissbildung KW - Wasserhaushalt KW - Oberflächenabdichtung KW - Teilsättigung KW - landfill cover lining system KW - tensile strength KW - cracking KW - unsaturation KW - water balance Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070522-8692 ER - TY - CHAP A1 - Zavadskas, Edmundas Kazimieras A1 - Peldschus, Friedel T1 - Mehrkriterielle Entscheidungen im Bauwesen N2 - Die Technische Gediminas Universität Vilnius, Lehrstuhl Technologie der Bauproduktion und die Hochschule für Technik, Wirtschaft und Kultur Leipzig, Lehrbereich Baubetrieb, haben sich seit mehreren Jahren mit den Problemen der mehrkriteriellen Entscheidung im Bauwesen befasst. Auf Grund der unterschiedlichen Herangehensweise werden für numerische Lösungen auch unterschiedliche Methoden benutzt. Das gemeinsame Ziel war immer eine optimale Variantenauswahl für baubetriebliche Produktionsprozesse. Zur Unterstützung der numerischen Lösungen wurde gemeinsam das EDV-Programm LEVI entwickelt, welches heute wahlweise als deutschsprachige oder englischsprachige Version genutzt werden kann. Die Beschreibung der zu lösenden Probleme erfolgt in Form einer Matrix. Diese enthält die Varianten (Zeilen) und die Kriterien (Spalten). Dabei sind die Varianten Ausdruck einer Menge real existierender Situationen für ein Problem. Alle betrachteten Varianten werden durch die gleichen Kriterien bewertet. Da die Kriterien gewöhnlich unterschiedliche Dimensionen besitzen, ist ihre Wirksamkeit nicht direkt miteinander vergleichbar. Eine Ausnahme bildet die Bewertung mit einem Punktsystem. Diese beinhaltet jedoch in hohem Maße subjektive Einflüsse und sollte daher nur in Ausnahmefällen benutzt werden. Um die Schwierigkeiten der unterschiedlichen Dimensionen für die verschiedenen Kriterien zu umgehen, wird das Verhältnis zum jeweiligen Optimalwert gebildet. Damit werden gleichzeitig die Diskrepanzen, die durch die unterschiedlichen Größenordnungen der Optimalwerte entstehen, beseitigt. Für das Verhältnis des Funktionswertes zum Optimalwert existieren unterschiedliche Auffassungen. Es muss an dieser Stelle bemerkt werden, dass mit der Entscheidung über die Art des Verhältnisses zum Optimalwert auch die Lösung beeinflusst werden kann. Untersuchungen über solche Auswirkungen sind noch nicht abgeschlossen, so dass im Augenblick nur vorläufige Ergebnisse genannt werden können. Von den bekannten Transformationsmethoden benutzen die Verfasser die vektorwertige Transformation, die lineare Transformation, die relative Abweichung und eine nichtlineare Transformation. Dadurch erfolgt eine Abbildung auf das Intervall [1 ; 0 ] bzw. [ 1 ; ~ 0 ]. Für die Lösungsmethoden erfolgt eine Unterscheidung in eine einseitige oder zweiseitige Fragestellungen. Während die einseitige Fragestellung auf die Bestimmung einer Rangfolge orientiert, berechnet die zweiseitige Fragestellung ein spieltheoretisches Gleichgewicht als Ausdruck eines rationalen Verhaltens von zwei entgegengesetzten Interessengruppen und Lösungen für Spiele gegen die Natur. In Anlehnung an das statische Gleichgewicht messen die Verfasser dem spieltheoretischen Gleichgewicht für die Dimensionierung baubetrieblicher Produktionsprozesse eine besondere Bedeutung zu. Bisherige Anwendungen konzentrieren sich auf die optimale Auswahl im Wohnungsbau, die Auswahl von Konstruktionsvarianten, die Auswahl von Montagevarianten, den Einsatz von Wärmedämmstoffen u.a. Für die Dimensionierung von Produktionsprozessen mit Serienproduktion wurde eine Lösung mit einer gewichteten Matrix vorgeschlagen. KW - Bauwesen KW - Entscheidung bei mehrfacher Zielsetzung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3812 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas A1 - Viteikiene, Milda T1 - Database of Best Practices and Decision Support Web-based System for Construction Innovation N2 - Many construction and facilities management Web sites can be found on the Internet. The interested parties on construction and facilities management Web sites can find databases of best practices, calculators, analyzers, software, expert and decision support systems, neural networks, etc. Technological innovation mainly through changes in the availability of information and communication technology inclusive databases of best practices, calculators, analyzers, software, neural networks, decision support and expert systems that have been provided by a variety of new services developed by the construction and facilities management sectors. Most of all calculators, analyzers, software, decision support and expert systems, neural networks and on-line systems seek to find out how to make the most economic decisions and most of all these decisions are intended only for economic objectives. Alternatives under evaluation have to be evaluated not only from the economic position, but take into consideration qualitative, technical, technological and other characteristics as well. Based on the analysis of the existing calculators, analyzers, information, expert and decision support systems, neural networks and in order to determine most efficient versions of best practices a Decision Support Web-Based System for Construction Innovation (IDSS) was developed by Vilnius Gediminas Technical University. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2173 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas T1 - Civil Engineering Decision Support Systems in Lithuania N2 - Civil engineering decision support systems (construction, building life cycle, refurbishment, total quality management, innovation, etc.) created in Lithuania are described in this paper. The above decision support systems comprise of the following constituent parts: data (database and its management system), models (model base and its management system) and a user interface. Presentation of information in databases may be in conceptual (digital, textual, graphical, photographic, video) and quantitative forms. Quantitative information presented involves criteria systems and subsystems, units of measurement, values and initial weight fully defining the variants provided. The databases were developed providing a multiple criteria analysis of alternatives from economical, infrastructure, technical, technological, qualitative, legislative, social and other perspectives. This information is provided in a user-oriented way. Since the analysis of alternatives is usually performed by taking into account economical, infrastructure, technical, technological, qualitative and other factors, a model-base include models which enable a decision maker to carry out a comprehensive analysis of the variants available and make a proper choice. These systems, related questions and practical case study were analysed the paper. KW - Wissensmanagement KW - Bautechnik KW - Entscheidungsunterstützungssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2579 ER - TY - JOUR A1 - Zarzycki, Andrzej T1 - Formal Mutations N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/28 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-14016 ER - TY - CHAP A1 - Zarli, Alain A1 - Storer, Graham A1 - Kazi, Abdul Samad (Sami) T1 - Building a Better Future: Major Results from the ICCI Cluster Project N2 - To support research in the building sector and in order to help it move towards a new digital economy, the European Commission under the 5th Framework initiative, especially the IST programme, funded various RTD projects. The opportunity to bring these IST projects together was acknowledged so that stronger links can be created under a clustering umbrella and that, moreover, links of those projects with their RTD environment could be facilitated. This has been the objective of work carried out within the ICCI (IST-2001-33022) Cluster project. This paper introduces the main aims and objectives of the project, and then presents its principal outcomes. In a second part, it synthesises the underlying concepts, technology and tools that will make ICT-based Construction a reality in a near future, and gives recommended actions for the industry, the EC and the Construction ICT R&D in Europe, giving some benefit of this project experience to the three communities. KW - Forschung KW - Europa KW - Informationstechnik KW - Baubetrieb Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1994 ER - TY - CHAP A1 - Zang, Di A1 - Sommer, G. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION N2 - We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30396 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER -