TY - BOOK ED - Hildebrand, Jörg ED - Loose, Tobias ED - Sakkiettibutra, Jens ED - Brand, Marcus T1 - Simulationsforum 2013 - Schweißen und Wärmebehandlung N2 - Das Buch veröffentlicht 22 Fachbeiträge der Konferenz "Simulationsforum 2013 - Schweißen und Wärmebehandlung". KW - Schweißen KW - Wärmebehandlung KW - Simulation KW - Stahl KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140512-21820 SN - 978-3-00-045902-3 PB - Förderverein Wärmebehandlung und Schweißen e.V. CY - Weimar ER - TY - JOUR A1 - Adamatzky, Andrew A1 - Schubert, Theresa T1 - Slime mold microfluidic logical gates JF - Materials Today N2 - We demonstrate how logical operations can be implemented in ensembles of protoplasmic tubes of acellular slime mold Physarum polycephalum. The tactile response of the protoplasmic tubes is used to actuate analogs of two- and four-input logical gates and memory devices. The slime mold tube logical gates display results of logical operations by blocking flow in mechanically stimulated tube fragments and redirecting the flow to output tube fragments. We demonstrate how XOR and NOR gates are constructed. We also exemplify circuits of hybrid gates and a memory device. The slime mold based gates are non-electronic, simple and inexpensive, and several gates can be realized simultaneously at sites where protoplasmic tubes merge. KW - Physarum polycephalum KW - protoplasmic tubes, Nucleolus-Organisator-Region Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31168 SP - 86 EP - 91 ER - TY - THES A1 - Chilingaryan, Naira T1 - Industrial Heritage: In-Between Memory and Transformation N2 - Exploratory Research into Transformation Processes of Former Industrial Complexes of Leipziger Baumwollspinnerei (Leipzig) and Mattatoio di Testaccio (Rome); New Meanings of Industrial Heritage Physical manifestations of the Industrial Revolution left a permanent imprint on the complexion of cities. Abandonment that followed the deindustrialization contributed to an estrangement, turning derelict industrial spaces and run‐down factories into a ballast to conjure with. At present, industrial heritage management applies flexibility and creativity, partially overcoming the essentially traditional paradigm of heritage preservation. This approach permits sustainable conservation – utilization and integration of disused industrial constructs in the contemporary urban landscape. Being a part of the European cultural stock, industrial heritage is an exciting and unique setting from many perspectives. It is defined and consumed by many markets, ranging from the industrial heritage tourism to the market of special events and festivals. Reused industrial buildings and factories come into view as products of post‐industrial societies, fitting to the Western post‐industrial (consumer) culture, offering a field of activities that are at an interface between the industrial history and contemporary socio‐cultural milieu. Alteration of values, growth of new roles and definitions of industrial heritage, generated by functional restructuring, is a subject which is often left behind the general discussion about sustainable conservation and adaptive reuse of industrial heritage. Yet, in the modified state, industrial heritage is very complex to understand and to define. By conducting a desk and a case study research of former industrial complexes – Leipziger Baumwollspinnerei and Mattatoio di Testaccio, this doctoral thesis aims to identify industrial heritage as a contemporary (post‐industrial) concept. Observation of ideas, values and definitions that emerge as a consequence of the transformation and re‐conceptualization of industrial heritage are intended to raise awareness and appreciation of industrial heritage in the full richness of its contemporary interpretation. KW - Denkmal KW - industrial heritage KW - Nutzungsänderung KW - Industrie KW - Kultur KW - Transformation KW - Wahrnehmung KW - environmental perception KW - adaptive reuse KW - sustainable conservation KW - representation KW - built environment Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140624-22291 ER - TY - THES A1 - Hildebrandt, Paula Marie T1 - Staubaufwirbeln oder die Kunst der Partizipation N2 - Die Dissertation Staubaufwirbeln oder die Kunst der Partizipation stellt die Frage, ob und inwiefern künstlerische Interventionen zur Aktualisierung und Entwicklung demokratischer Teilhabe beitragen können. Im Zentrum der Untersuchung stehen sechs Projektgruppen, die experimentelle Freiräume gestalten, in denen neue Formen von Demokratielernen, Stadtnutzung, gesellschaftlicher Repräsentation und Symbolpolitik erprobt werden. Die Kunst der Partizipation wird in fünf Dimensionen beschrieben: Initiative, Kollektivität, Inszenierung, Öffentlichkeit und Kooperation. Sie erweitert damit das Repertoire demokratischer Beteiligungsformen sowie gegenwärtige Kunstbegriffe. Ihre heimliche Relevanz besteht darin, sich immer wieder dem Risiko auszusetzen, von allen Seiten als unzureichend betrachtet zu werden. Demokratie konstituiert sich hier als ästhetische Erfahrung. Die Kunst besteht darin, die Flüchtigkeit demokratischer Teilhabe erfahrbar zu machen, also gestaltbar und veränderbar. KW - Stadt KW - Kunst KW - Partizipation KW - Demokratie KW - Öffentlichkeit Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140410-21589 ER - TY - THES A1 - Kalugila, Shubira T1 - HOUSING INTERVENTIONS AND ITS INFLUENCE ON URBAN DEVELOPMENT: Opportunities and Challenges in Mixed Informal Settlements, in Dar es Salaam - Tanzania N2 - Rapid urbanisation that is not accompanied by socio-economic development strains the capacity of local and national governments to provide even basic services such as shelter. Informal settlements i.e. settlements not built or developed according to the formal regulations have become a solution to many urban dwellers in developing countries. In Tanzania informal settlements accommodate people from low, middle and high income groups. The study explores the nature of potentials and challenges posed by the existence of mixed socio-economic groups in informal settlements, including an assessment of what can be done to optimise utilisation of potentials and mitigation of conflicts. Using a case study strategy, the study was conducted in Dar es Salaam city focusing on Makongo mixed informal settlement. The results show that mixed informal settlements are as a result of several factors including uncoordinated energies of people. The urban development forces that bring change in the development of the city are stronger than the public states capacity to coordinate and manage them. Informal settlements also offer user-friendly land tenure, flexibility in house construction and proximity to livelihoods. Other factors include the nature of socio-economic living patterns and extension of urban boundaries. Community members operate using social norms. Advantages of mixed informal settlements include availability of plots according to needs and affordability while a disadvantage is, people of different socio-economic groups perceive problems differently. For policies to be effective, their formulation should be derived from what is happening on the ground i.e. addressing informal settlements according to their heterogeneity. Moreover, empowered local authorities can assist in implementing national development plans; also actors in land development including government institutions, non-governmental institutions, financial institutions, private sector, professionals, political leaders, research institutions, policy-makers and training institutions need to recognise, understand and respect each other’s roles, and pull resources together to minimise problems related to informality in land development; utilise potentials and minimise challenges in mixed informal settlements in Dar es Salaam. Key words: Informal settlements, land development, urbanisation KW - Informal Settlements KW - Land development KW - Verstädterung KW - Urbanität KW - Urbanisation KW - Landentwicklung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140902-22930 ER - TY - GEN A1 - Garisch, Mathias A1 - Kutzner, Eva A1 - Oehler, Vanessa A1 - Patzer, Nicole A1 - Schmeing, Carolin T1 - Analyse von Terminplänen N2 - Das Bachelorprojekt „Analyse von Terminplänen“ beschäftigt sich mit der Analyse der Abhängigkeiten zwischen den unterschiedlichen Vorgängen des Bauablaufs. Die Problematik in der Terminplanerstellung liegt darin, dass ein Terminplan nicht alle Hintergrundinformationen abbildet und es daher zu Projektverzögerungen und Absprachefehlern kommen kann. Dieses Bachelorprojekt macht Gebrauch von bereits aufbereiteten Informationen zur genannten Problematik in Form eines vorangegangen Bachelorprojekts und eines Masterprojekts, sowie einer Umfrage des Instituts für Bauwirtschaft der Universität Kassel. In diesem Projekt werden 50 neue und 100 bereits existierende Terminpläne von diversen Unternehmen aus ganz Deutschland analysiert und ausgewertet. Die Analyse der Terminpläne basiert auf geführten Experteninterviews. Das Interview berücksichtigt Faktoren wie zum Beispiel Darstellungsformen, Detaillierungsgrade, Abhängigkeiten, Vorgangsdauern oder Planungsgrundlagen. Durch die Befragung von möglichst vielen Firmen konnte festgestellt werden, dass jeder Terminplanentwickler eine Vorgehensweise entwickelt, nach welcher er arbeitet. Außerdem ist in den Gesprächen deutlich geworden, dass das Theorie- Praxis-Gefälle sehr groß ist. Das heißt, dass theoretische Modelle aus der Ausbildung an beispielsweise Hochschulen, in der Praxis heutzutage wenig angewandt werden. Nach der Analyse der Terminpläne und Auswertung der Interviews, werden die Daten in eine vom vorangehenden Masterprojekt erstellte Excel-Tabelle eingepflegt. Die vorhandenen Informationen werden dann anhand verschiedenster Diagramme verglichen und ausgewertet. KW - Analyse KW - Planung KW - Abhängigkeit KW - Bau KW - Terminplan KW - Analyse KW - Abhängigkeiten KW - Vorgang Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140317-21392 ER - TY - THES A1 - Dang, Trang T1 - Automated Detailing of 4D Schedules N2 - The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection. Several experiments indicated that the lack of detailed planning causes about 30% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints. This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 32 KW - BIM KW - Simulation KW - Pareto optimization KW - multi-objective optimization KW - scheduling Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141006-23103 ER - TY - JOUR A1 - Völker, Conrad A1 - Mämpel, Silvio A1 - Kornadt, Oliver T1 - Measuring the human body’s micro‐climate using a thermal manikin JF - Indoor Air N2 - The human body is surrounded by a micro‐climate which results from its convective release of heat. In this study, the air temperature and flow velocity of this micro‐climate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the micro‐climate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the micro‐climate shape strongly depends not only on the body segment, but also on boundary conditions: the higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the air flow in the micro‐climate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient. KW - Raumklima KW - Mikroklima KW - Wärmeübertragung KW - Strömungsmechanik KW - thermal manikin KW - climate chamber KW - micro climate KW - heat transfer coefficient KW - CFD KW - thermography Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38153 UR - https://onlinelibrary.wiley.com/doi/abs/10.1111/ina.12112 N1 - This is the peer reviewed version of the following article: "Measuring the human body’s micro‐climate using a thermal manikin", which has been published in final form at https://doi.org/10.1111/ina.12112. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. IS - 24, 6 SP - 567 EP - 579 ER - TY - JOUR A1 - Motra, Hem Bahadur A1 - Hildebrand, Jörg A1 - Dimmig-Osburg, Andrea T1 - Assessment of strain measurement techniques to characterise mechanical properties of structural steel JF - Engineering Science and Technology, an International Journal N2 - Strain measurement is important in mechanical testing. A wide variety of techniques exists for measuring strain in the tensile test; namely the strain gauge, extensometer, stress and strain determined by machine crosshead motion, Geometric Moire technique, optical strain measurement techniques and others. Each technique has its own advantages and disadvantages. The purpose of this study is to quantitatively compare the strain measurement techniques. To carry out the tensile test experiments for S 235, sixty samples were cut from the web of the I-profile in longitudinal and transverse directions in four different dimensions. The geometry of samples are analysed by 3D scanner and vernier caliper. In addition, the strain values were determined by using strain gauge, extensometer and machine crosshead motion. Three techniques of strain measurement are compared in quantitative manner based on the calculation of mechanical properties (modulus of elasticity, yield strength, tensile strength, percentage elongation at maximum force) of structural steel. A statistical information was used for evaluating the results. It is seen that the extensometer and strain gauge provided reliable data, however the extensometer offers several advantages over the strain gauge and crosshead motion for testing structural steel in tension. Furthermore, estimation of measurement uncertainty is presented for the basic material parameters extracted through strain measurement. KW - Baustahl KW - Werkstoffprüfung KW - Zugversuch KW - Affecting factors; Measurement uncertainty; Materials testing; Quantitative comparison; Strain comparison; Tensile test Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31540 SP - 260 EP - 269 ER - TY - JOUR A1 - Xu, G. A1 - Mourrain, B. A1 - Galligo, A. A1 - Rabczuk, Timon T1 - High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods JF - Computational Mechanics N2 - High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Silani, Mohammad A1 - Ziaei-Rad, S. A1 - Talebi, Hossein A1 - Rabczuk, Timon T1 - A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites JF - Theoretical and Applied Fracture Mechanics N2 - A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Amani, Jafar A1 - Bagherzadeh, Amir Saboor A1 - Rabczuk, Timon T1 - Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method JF - Mathematical Problems in Engineering N2 - Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhao, Jiyun A1 - Jiang, Jin-Wu A1 - Wang, L. A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - Coarse-grained potentials of single-walled carbon nanotubes JF - Journal of the Mechanics and Physics of Solids N2 - Coarse-grained potentials of single-walled carbon nanotubes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - CHAP A1 - Hijazi, Ihab Hamzi A1 - Hussein, M. H. A1 - König, Reinhard T1 - Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building T2 - 9th 3DGeoInfo Conference N2 - Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building KW - Informatik KW - bim; cad; citygml; gbxml; thermal design Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160118-25089 CY - Dubai, UAE ER - TY - THES A1 - Mai, Luu T1 - Structural Control Systems in High-speed Railway Bridges N2 - Structural vibration control of high-speed railway bridges using tuned mass dampers, semi-active tuned mass dampers, fluid viscous dampers and magnetorheological dampers to reduce resonant structural vibrations is studied. In this work, the addressed main issues include modeling of the dynamic interaction of the structures, optimization of the parameters of the dampers and comparison of their efficiency. A new approach to optimize multiple tuned mass damper systems on an uncertain model is proposed based on the H-infinity optimization criteria and the DK iteration procedure with norm-bounded uncertainties in frequency domain. The parameters of tuned mass dampers are optimized directly and simultaneously on different modes contributing significantly to the multi-resonant peaks to explore the different possible combinations of parameters. The effectiveness of the present method is also evaluated through comparison with a previous method. In the case of semi-active tuned mass dampers, an optimization algorithm is derived to control the magnetorheological damper in these semi-active damping systems. The use of the proposed algorithm can generate various combinations of control gains and state variables. This can lead to the improvement of the ability of MR dampers to track the desired control forces. An uncertain model to reduce detuning effects is also considered in this work. Next, for fluid viscous dampers, in order to tune the optimal parameters of fluid viscous dampers to the vicinity of the exact values, analytical formulae which can include structural damping are developed based on the perturbation method. The proposed formulae can also be considered as an improvement of the previous analytical formulae, especially for bridge beams with large structural damping. Finally, a new combination of magnetorheological dampers and a double-beam system to improve the performance of the primary structure vibration is proposed. An algorithm to control magnetorheological dampers in this system is developed by using standard linear matrix inequality techniques. Weight functions as a loop shaping procedure are also introduced in the feedback controllers to improve the tracking ability of magnetorheological damping forces. To this end, the effectiveness of magnetorheological dampers controlled by the proposed scheme, along with the effects of the uncertain and time-delay parameters on the models, are evaluated through numerical simulations. Additionally, a comparison of the dampers based on their performance is also considered in this work. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2014,3 KW - High-speed railway bridge KW - Control system KW - Passive damper KW - Semi-active damper KW - Railway bridges Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141223-23391 SN - 1610-7381 ER - TY - THES A1 - Cervantes, Juan T1 - Liberal or coordinated Sustainability? Environmental Governance in Different Capitalist Schemes: Germany and the United Kingdom. N2 - This research represents an effort made towards contribute to the critical thinking from an analysis of the hegemonic neoliberal ideology, which supports the idea of the end of history and the technocratic universalism which in turn implies the imposition of a single model of life, denying, in the name of realism and the end of utopias, any other alternative possibility. This makes it necessary to recover the critical thinking to analyze and understand the reality, thus overcoming the ideological barrier towards claiming that things can be otherwise. It is clear from this research that the discourse of sustainable development has unquestionably transformed the context and content of political activity in Europe. This discourse has exercised and obvious influence in the Governance processes, mainly because it has contributed to the introduction of a new political field, which was then promoted, either explicitly or implicitly by policy-makers, researchers on the field and practitioners during the last three decades. Though it may be bold to affirm that the discourse of sustainable development is the sole driver of these whole set of changes, there is no doubt that it has played a key part in the way in which the governance priorities have been handled in the European continent. KW - capitalism KW - neoliberalism KW - sustainable development KW - ideology Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141218-23343 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Barbosa, J.I. T1 - The extended unsymmetric frontal solution for multiple-point constraints JF - Engineering Computations N2 - The extended unsymmetric frontal solution for multiple-point constraints KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Lahmer, Tom A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) JF - Composites Part B Engineering N2 - Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 80 EP - 95 ER - TY - JOUR A1 - Joshi, Suraj A1 - Hildebrand, Jörg A1 - Aloraier, Abdulkareem S. A1 - Rabczuk, Timon T1 - Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate JF - Computational Materials Science N2 - This paper presents several aspects of characterization of welding heat source parameters in Goldak’s double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40% to 80% in increments of 10%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak’s double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.commatsci.2012.11.029 SP - 559 EP - 565 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Jiang, Jin-Wu A1 - Jia, Yue A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates JF - Carbon N2 - Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. The dependence of the cohesive energy on their size, spacing and crossing angles is analyzed. Checking against full atom molecular dynamics calculations and available experimental results shows that the continuum solution has high accuracy. The equilibrium distances between the nanotubes, graphene and substrates with minimum cohesive energy are also provided explicitly. The obtained analytical solution should be of great help for understanding the interaction between the nanostructures and substrates, and designing composites and nanoelectromechanical systems. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.carbon.2013.01.041 SP - 108 EP - 119 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Kou, Liangzhi A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures JF - Nanotechnology N2 - Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1088/0957-4484/25/29/295701 ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - Schmitt, Gerhard T1 - New Methods in Urban Analysis and Simulation: Documentation of the teaching results from the spring semester 2014 N2 - Documentation of the teaching results from the spring semester 2014 at ETH Zurich KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25154 ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - König, Gerhard T1 - Digital Urban Simulation: Documentation of the teaching results from the fall semester 2014 N2 - Documentation of the teaching results from the fall semester 2014 KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25125 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Rafiee, Roham A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling JF - Computational Materials Science N2 - Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 295 EP - 305 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Mabrouki, Tarek A1 - Fontaine, Michaël A1 - Gong, Yadong A1 - Rabczuk, Timon T1 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation JF - Composites Part B Engineering N2 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 27 EP - 33 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Muthu, Jacob A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics JF - Computational Mechanics N2 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 369 EP - 385 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Wang, Bing-Shen A1 - Rabczuk, Timon T1 - Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation JF - Nanotechnology N2 - Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Lu, Lixin A1 - Rabczuk, Timon T1 - Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines JF - The Journal of Chemical Physics N2 - Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1063/1.4878115 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Optimization of fiber distribution in fiber reinforced composite by using NURBS functions JF - Computational Materials Science N2 - Optimization of fiber distribution in fiber reinforced composite by using NURBS functions KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 463 EP - 473 ER - TY - JOUR A1 - Jamshidian, M. A1 - Rabczuk, Timon T1 - Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale JF - Journal of Computational Physics N2 - Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 23 EP - 35 ER - TY - JOUR A1 - Thai, Chien H. A1 - Ferreira, A.J.M. A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung T1 - Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory JF - European Journal of Mechanics N2 - Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 89 EP - 108 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements JF - Structural and Multidisciplinary Optimization N2 - Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Chen, Lei A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain A1 - Limbert, Georges T1 - Explicit finite deformation analysis of isogeometric membranes JF - Computer Methods in Applied Mechanics and Engineering N2 - Explicit finite deformation analysis of isogeometric membranes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 104 EP - 130 ER - TY - JOUR A1 - Le, Ha Thanh A1 - Nguyen, Sang Thanh A1 - Ludwig, Horst-Michael T1 - A Study on High Performance Fine-Grained Concrete Containing Rice Husk Ash JF - International Journal of Concrete Structures and Materials N2 - Rice husk ash (RHA) is classified as a highly reactive pozzolan. It has a very high silica content similar to that of silica fume (SF). Using less-expensive and locally available RHA as a mineral admixture in concrete brings ample benefits to the costs, the technical properties of concrete as well as to the environment. An experimental study of the effect of RHA blending on workability, strength and durability of high performance fine-grained concrete (HPFGC) is presented. The results show that the addition of RHA to HPFGC improved significantly compressive strength, splitting tensile strength and chloride penetration resistance. Interestingly, the ratio of compressive strength to splitting tensile strength of HPFGC was lower than that of ordinary concrete, especially for the concrete made with 20 % RHA. Compressive strength and splitting tensile strength of HPFGC containing RHA was similar and slightly higher, respectively, than for HPFGC containing SF. Chloride penetration resistance of HPFGC containing 10–15 % RHA was comparable with that of HPFGC containing 10 % SF. KW - Hochfester Beton KW - Verarbeitungseigenschaft KW - Druckfestigkeit KW - high performance fine-grained concrete, rice husk ash, workability, compressive strength, splitting tensile strength, chloride penetration resistance Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31477 SP - 301 EP - 307 ER - TY - JOUR A1 - König, Reinhard A1 - Standfest, Matthias A1 - Schmitt, Gerhard ED - Thompson, Emine Mine T1 - Evolutionary multi-criteria optimization for building layout planning: Exemplary application based on the PSSA framework JF - 32nd eCAADe Conference - Volume 2 N2 - When working on urban planning projects there are usually multiple aspects to consider. Often these aspects are contradictory and it is not possible to choose one over the other; instead, they each need to be fulfilled as well as possible. Planners typically draw on past experience when subjectively prioritising which aspects to consider with which degree of importance for their planning concepts. This practice, although understandable, places power and authority in the hands of people who have varying degrees of expertise, which means that the best possible solution is not always found, because it is either not sought or the problem is regarded as being too complex for human capabilities. To improve this situation, the project presented here shows the potential of multi-criteria optimisation algorithms using the example of a new housing layout for an urban block. In addition it is shown, how Self-Organizing-Maps can be used to visualise multi-dimensional solution spaces in an easy analysable and comprehensible form. KW - Architektur Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25139 UR - http://cumincad.scix.net/cgi-bin/works/Show?_id=ecaade2014_019&sort=DEFAULT&search=series%3aecaade year%3a2014&hits=132 SP - 567 EP - 574 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Liang, Chao A1 - Rabczuk, Timon T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared. KW - Energiespeicherung KW - Druckluft KW - Kaverne KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31726 ER - TY - JOUR A1 - Amani, Jafar A1 - Saboor Bagherzadeh, Amir A1 - Rabczuk, Timon T1 - Error estimate and adaptive refinement in mixed discrete least squares meshless method JF - Mathematical Problems in Engineering N2 - The node moving and multistage node enrichment adaptive refinement procedures are extended in mixed discrete least squares meshless (MDLSM) method for efficient analysis of elasticity problems. In the formulation of MDLSM method, mixed formulation is accepted to avoid second-order differentiation of shape functions and to obtain displacements and stresses simultaneously. In the refinement procedures, a robust error estimator based on the value of the least square residuals functional of the governing differential equations and its boundaries at nodal points is used which is inherently available from the MDLSM formulation and can efficiently identify the zones with higher numerical errors. The results are compared with the refinement procedures in the irreducible formulation of discrete least squares meshless (DLSM) method and show the accuracy and efficiency of the proposed procedures. Also, the comparison of the error norms and convergence rate show the fidelity of the proposed adaptive refinement procedures in the MDLSM method. KW - Elastizität KW - Fehlerabschätzung KW - MDLSM method Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31181 ER - TY - JOUR A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon A1 - Lam-Phat, T. A1 - Ho-Huu, V. A1 - Phung-Van, P. T1 - Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3) JF - Theoretical and Applied Fracture Mechanics N2 - Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3) KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Rabczuk, Timon A1 - Liang, C. T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Amiri, Fatemeh A1 - Millán, D. A1 - Shen, Y. A1 - Rabczuk, Timon A1 - Arroyo, M. T1 - Phase-field modeling of fracture in linear thin shells JF - Theoretical and Applied Fracture Mechanics N2 - Phase-field modeling of fracture in linear thin shells KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 102 EP - 109 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Park, Harold S. A1 - Rabczuk, Timon T1 - MoS2 nanoresonators: intrinsically better than graphene? JF - Nanoscale N2 - MoS2 nanoresonators: intrinsically better than graphene? KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 3618 EP - 3625 ER - TY - JOUR A1 - König, Reinhard A1 - Knecht, Katja T1 - Comparing two evolutionary algorithm based methods for layout generation: Dense packing versus subdivision JF - Artificial Intelligence for Engineering Design, Analysis and Manufacturing N2 - We present and compare two evolutionary algorithm based methods for rectangular architectural layout generation: dense packing and subdivision algorithms.We analyze the characteristics of the two methods on the basis of three floor plan sce- narios. Our analyses include the speed with which solutions are generated, the reliability with which optimal solutions can be found, and the number of different solutions that can be found overall. In a following step, we discuss the methods with respect to their different user interaction capabilities. In addition, we show that each method has the capability to generate more complex L-shaped layouts. Finally,we conclude that neither of the methods is superior but that each of them is suitable for use in distinct application scenarios because of its different properties. KW - Architektur KW - Informatik KW - Kremlas Y1 - 2014 UR - http://www.journals.cambridge.org/abstract_S0890060414000237 N1 - Paper is only available from the journal home page. SP - 285 EP - 299 ER - TY - JOUR A1 - Areias, Pedro A1 - Pinto da Costa, A. A1 - Rabczuk, Timon A1 - Queiros de Melo, F. J. M. A1 - Dias-da-Costa, D. T1 - An alternative formulation for quasi-static frictional and cohesive contact problems JF - Computational Mechanics N2 - An alternative formulation for quasi-static frictional and cohesive contact problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 807 EP - 824 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Gracie, Robert A1 - Yang, Shih-Wei A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Efficient Coarse Graining in Multiscale Modeling of Fracture JF - Theoretical and Applied Fracture Mechanics N2 - Efficient Coarse Graining in Multiscale Modeling of Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 126 EP - 143 ER - TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Nguyen, Hiep Vinh A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Duflot, Marc T1 - A cell-based smoothed finite element method for three dimensional solid structures JF - KSCE Journal of Civil Engineering N2 - This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s12205-012-1515-7 SP - 1230 EP - 1242 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Gracie, Robert A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - An adaptive multiscale method for quasi-static crack growth JF - Computational Mechanics N2 - This paper proposes an adaptive atomistic- continuum numerical method for quasi-static crack growth. The phantom node method is used to model the crack in the continuum region and a molecular statics model is used near the crack tip. To ensure self-consistency in the bulk, a virtual atom cluster is used to model the material of the coarse scale. The coupling between the coarse scale and fine scale is realized through ghost atoms. The ghost atom positions are interpolated from the coarse scale solution and enforced as boundary conditions on the fine scale. The fine scale region is adaptively enlarged as the crack propagates and the region behind the crack tip is adaptively coarsened. An energy criterion is used to detect the crack tip location. The triangular lattice in the fine scale region corresponds to the lattice structure of the (111) plane of an FCC crystal. The Lennard-Jones potential is used to model the atom–atom interactions. The method is implemented in two dimensions. The results are compared to pure atomistic simulations; they show excellent agreement. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s00466-013-0952-6 SP - 1129 EP - 1148 ER - TY - JOUR A1 - Beex, L.A.A. A1 - Kerfriden, Pierre A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain T1 - Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation JF - Computer Methods in Applied Mechanics and Engineering N2 - Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Nguyen, V.P. A1 - Kerfriden, Pierre A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm JF - Computer-Aided Design N2 - Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Talebi, Hossein A1 - Silani, Mohammad A1 - Bordas, Stéphane Pierre Alain A1 - Kerfriden, Pierre A1 - Rabczuk, Timon T1 - A computational library for multiscale modeling of material failure JF - Computational Mechanics N2 - A computational library for multiscale modeling of material failure KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Ilyani Akmar, A.B. A1 - Lahmer, Tom A1 - Bordas, Stéphane Pierre Alain A1 - Beex, L.A.A. A1 - Rabczuk, Timon T1 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties JF - Composite Structures N2 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.compstruct.2014.04.014 SP - 1 EP - 17 ER -