TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Nguyen, Hiep Vinh A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Duflot, Marc T1 - A cell-based smoothed finite element method for three dimensional solid structures JF - KSCE Journal of Civil Engineering N2 - This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s12205-012-1515-7 SP - 1230 EP - 1242 ER - TY - JOUR A1 - Talebi, Hossein A1 - Silani, Mohammad A1 - Bordas, Stéphane Pierre Alain A1 - Kerfriden, Pierre A1 - Rabczuk, Timon T1 - A computational library for multiscale modeling of material failure JF - Computational Mechanics N2 - A computational library for multiscale modeling of material failure KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Liang, Chao A1 - Rabczuk, Timon T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared. KW - Energiespeicherung KW - Druckluft KW - Kaverne KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31726 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Rabczuk, Timon A1 - Liang, C. T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Völske, Michael A1 - Gollub, Tim A1 - Hagen, Matthias A1 - Stein, Benno T1 - A keyquery-based classification system for CORE JF - D-Lib Magazine N2 - We apply keyquery-based taxonomy composition to compute a classification system for the CORE dataset, a shared crawl of about 850,000 scientific papers. Keyquery-based taxonomy composition can be understood as a two-phase hierarchical document clustering technique that utilizes search queries as cluster labels: In a first phase, the document collection is indexed by a reference search engine, and the documents are tagged with the search queries they are relevant—for their so-called keyqueries. In a second phase, a hierarchical clustering is formed from the keyqueries within an iterative process. We use the explicit topic model ESA as document retrieval model in order to index the CORE dataset in the reference search engine. Under the ESA retrieval model, documents are represented as vectors of similarities to Wikipedia articles; a methodology proven to be advantageous for text categorization tasks. Our paper presents the generated taxonomy and reports on quantitative properties such as document coverage and processing requirements. KW - Massendaten KW - Taxonomie KW - Dynamic Taxonomy Composition, Keyquery, Classification Systems, Reverted Index, Big Data Problem Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31662 ER - TY - JOUR A1 - Silani, Mohammad A1 - Ziaei-Rad, S. A1 - Talebi, Hossein A1 - Rabczuk, Timon T1 - A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites JF - Theoretical and Applied Fracture Mechanics N2 - A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Le, Ha Thanh A1 - Nguyen, Sang Thanh A1 - Ludwig, Horst-Michael T1 - A Study on High Performance Fine-Grained Concrete Containing Rice Husk Ash JF - International Journal of Concrete Structures and Materials N2 - Rice husk ash (RHA) is classified as a highly reactive pozzolan. It has a very high silica content similar to that of silica fume (SF). Using less-expensive and locally available RHA as a mineral admixture in concrete brings ample benefits to the costs, the technical properties of concrete as well as to the environment. An experimental study of the effect of RHA blending on workability, strength and durability of high performance fine-grained concrete (HPFGC) is presented. The results show that the addition of RHA to HPFGC improved significantly compressive strength, splitting tensile strength and chloride penetration resistance. Interestingly, the ratio of compressive strength to splitting tensile strength of HPFGC was lower than that of ordinary concrete, especially for the concrete made with 20 % RHA. Compressive strength and splitting tensile strength of HPFGC containing RHA was similar and slightly higher, respectively, than for HPFGC containing SF. Chloride penetration resistance of HPFGC containing 10–15 % RHA was comparable with that of HPFGC containing 10 % SF. KW - Hochfester Beton KW - Verarbeitungseigenschaft KW - Druckfestigkeit KW - high performance fine-grained concrete, rice husk ash, workability, compressive strength, splitting tensile strength, chloride penetration resistance Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31477 SP - 301 EP - 307 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Jiang, Jin-Wu A1 - Jia, Yue A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates JF - Carbon N2 - Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. The dependence of the cohesive energy on their size, spacing and crossing angles is analyzed. Checking against full atom molecular dynamics calculations and available experimental results shows that the continuum solution has high accuracy. The equilibrium distances between the nanotubes, graphene and substrates with minimum cohesive energy are also provided explicitly. The obtained analytical solution should be of great help for understanding the interaction between the nanostructures and substrates, and designing composites and nanoelectromechanical systems. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.carbon.2013.01.041 SP - 108 EP - 119 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Gracie, Robert A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - An adaptive multiscale method for quasi-static crack growth JF - Computational Mechanics N2 - This paper proposes an adaptive atomistic- continuum numerical method for quasi-static crack growth. The phantom node method is used to model the crack in the continuum region and a molecular statics model is used near the crack tip. To ensure self-consistency in the bulk, a virtual atom cluster is used to model the material of the coarse scale. The coupling between the coarse scale and fine scale is realized through ghost atoms. The ghost atom positions are interpolated from the coarse scale solution and enforced as boundary conditions on the fine scale. The fine scale region is adaptively enlarged as the crack propagates and the region behind the crack tip is adaptively coarsened. An energy criterion is used to detect the crack tip location. The triangular lattice in the fine scale region corresponds to the lattice structure of the (111) plane of an FCC crystal. The Lennard-Jones potential is used to model the atom–atom interactions. The method is implemented in two dimensions. The results are compared to pure atomistic simulations; they show excellent agreement. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s00466-013-0952-6 SP - 1129 EP - 1148 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Muthu, Jacob A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics JF - Computational Mechanics N2 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 369 EP - 385 ER - TY - JOUR A1 - Areias, Pedro A1 - Pinto da Costa, A. A1 - Rabczuk, Timon A1 - Queiros de Melo, F. J. M. A1 - Dias-da-Costa, D. T1 - An alternative formulation for quasi-static frictional and cohesive contact problems JF - Computational Mechanics N2 - An alternative formulation for quasi-static frictional and cohesive contact problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 807 EP - 824 ER - TY - GEN A1 - Garisch, Mathias A1 - Kutzner, Eva A1 - Oehler, Vanessa A1 - Patzer, Nicole A1 - Schmeing, Carolin T1 - Analyse von Terminplänen N2 - Das Bachelorprojekt „Analyse von Terminplänen“ beschäftigt sich mit der Analyse der Abhängigkeiten zwischen den unterschiedlichen Vorgängen des Bauablaufs. Die Problematik in der Terminplanerstellung liegt darin, dass ein Terminplan nicht alle Hintergrundinformationen abbildet und es daher zu Projektverzögerungen und Absprachefehlern kommen kann. Dieses Bachelorprojekt macht Gebrauch von bereits aufbereiteten Informationen zur genannten Problematik in Form eines vorangegangen Bachelorprojekts und eines Masterprojekts, sowie einer Umfrage des Instituts für Bauwirtschaft der Universität Kassel. In diesem Projekt werden 50 neue und 100 bereits existierende Terminpläne von diversen Unternehmen aus ganz Deutschland analysiert und ausgewertet. Die Analyse der Terminpläne basiert auf geführten Experteninterviews. Das Interview berücksichtigt Faktoren wie zum Beispiel Darstellungsformen, Detaillierungsgrade, Abhängigkeiten, Vorgangsdauern oder Planungsgrundlagen. Durch die Befragung von möglichst vielen Firmen konnte festgestellt werden, dass jeder Terminplanentwickler eine Vorgehensweise entwickelt, nach welcher er arbeitet. Außerdem ist in den Gesprächen deutlich geworden, dass das Theorie- Praxis-Gefälle sehr groß ist. Das heißt, dass theoretische Modelle aus der Ausbildung an beispielsweise Hochschulen, in der Praxis heutzutage wenig angewandt werden. Nach der Analyse der Terminpläne und Auswertung der Interviews, werden die Daten in eine vom vorangehenden Masterprojekt erstellte Excel-Tabelle eingepflegt. Die vorhandenen Informationen werden dann anhand verschiedenster Diagramme verglichen und ausgewertet. KW - Analyse KW - Planung KW - Abhängigkeit KW - Bau KW - Terminplan KW - Analyse KW - Abhängigkeiten KW - Vorgang Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140317-21392 ER - TY - THES A1 - Udrea, Mihai-Andrei T1 - Assessment of Data from Dynamic Bridge Monitoring N2 - The focus of the thesis is to process measurements acquired from a continuous monitoring system at a railway bridge. Temperature, strain and ambient vibration records are analysed and two main directions of investigation are pursued. The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is studied and correlated to environmental and operational factors. The second aspect deals with the structural response to passing trains. Corresponding triggered records of strain and temperature are processed and their assessment is accomplished using the average strains induced by each train as the reference parameter. Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out. KW - automatic modal analysis KW - stochastic subspace identification KW - modal tracking KW - modal parameter estimation KW - clustering KW - Messtechnik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140429-21742 ER - TY - JOUR A1 - Motra, Hem Bahadur A1 - Hildebrand, Jörg A1 - Dimmig-Osburg, Andrea T1 - Assessment of strain measurement techniques to characterise mechanical properties of structural steel JF - Engineering Science and Technology, an International Journal N2 - Strain measurement is important in mechanical testing. A wide variety of techniques exists for measuring strain in the tensile test; namely the strain gauge, extensometer, stress and strain determined by machine crosshead motion, Geometric Moire technique, optical strain measurement techniques and others. Each technique has its own advantages and disadvantages. The purpose of this study is to quantitatively compare the strain measurement techniques. To carry out the tensile test experiments for S 235, sixty samples were cut from the web of the I-profile in longitudinal and transverse directions in four different dimensions. The geometry of samples are analysed by 3D scanner and vernier caliper. In addition, the strain values were determined by using strain gauge, extensometer and machine crosshead motion. Three techniques of strain measurement are compared in quantitative manner based on the calculation of mechanical properties (modulus of elasticity, yield strength, tensile strength, percentage elongation at maximum force) of structural steel. A statistical information was used for evaluating the results. It is seen that the extensometer and strain gauge provided reliable data, however the extensometer offers several advantages over the strain gauge and crosshead motion for testing structural steel in tension. Furthermore, estimation of measurement uncertainty is presented for the basic material parameters extracted through strain measurement. KW - Baustahl KW - Werkstoffprüfung KW - Zugversuch KW - Affecting factors; Measurement uncertainty; Materials testing; Quantitative comparison; Strain comparison; Tensile test Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31540 SP - 260 EP - 269 ER - TY - THES A1 - Dang, Trang T1 - Automated Detailing of 4D Schedules N2 - The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection. Several experiments indicated that the lack of detailed planning causes about 30% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints. This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 32 KW - BIM KW - Simulation KW - Pareto optimization KW - multi-objective optimization KW - scheduling Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141006-23103 ER - TY - THES A1 - Wellnitz, Felix T1 - BAUKLIMATISCHE ERTÜCHTIGUNG UND NACHHALTIGE INSTANDSETZUNG DENKMALGESCHÜTZTER VERWALTUNGSBAUTEN DER 1950er JAHRE AM BEISPIEL DER EHEMALIGEN BAYERISCHEN LANDESVERTRETUNG VON SEP RUF IN BONN N2 - Viele Baudenkmale sind dem Konflikt aus baulichem Instandsetzungsbedarf für eine zeitgemäße Nutzung und einer sich möglicherweise daraus ergebenden Gefährdung der Denkmalsubstanz ausgesetzt. Gründe sind steigende Energiekosten für den Gebäudebetrieb, zeitgemäße Anforderungen an Behaglichkeit und Arbeitsschutz, sowie die Vermeidung von Schäden an der Substanz aufgrund baulicher Mängel des konstruktiven Wärme- und Feuchteschutzes. Gleichzeitig gilt für viele Bauten aber auch die Notwendigkeit regelmäßiger Nutzung und Bewirtschaftung, um den Erhalt überhaupt zu sichern. Die energetische Ertüchtigung von Baudenkmalen scheitert in diesem Spannungsfeld oft am unlösbaren Konflikt zwischen dem Erhalt der bauzeitlichen Substanz auf der einen und der notwendigen energetischen Optimierung der Gebäudehülle auf der anderen Seite. Zielsetzung dieser Fallstudie ist die beispielhafte Entwicklung einer bauklimatischen und denkmalgerechten Ertüchtigungsstrategie am Beispiel eines Verwaltungsgebäudes der Nachkriegsmoderne als Beitrag zur Lösung dieses Konfliktes. KW - Denkmalpflege KW - Bauklimatik KW - Bauphysik KW - Sanierung KW - Nachkriegsmoderne KW - Ertüchtigung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140919-23031 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Lu, Lixin A1 - Rabczuk, Timon T1 - Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines JF - The Journal of Chemical Physics N2 - Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1063/1.4878115 ER - TY - JOUR A1 - Chen, Zhen A1 - Schwing, Moritz A1 - Karlovšek, Jurij A1 - Wagner, Norman A1 - Scheuermann, Alexander T1 - Broadband Dielectric Measurement Methods for Soft Geomaterials: Coaxial Transmission Line Cell and Open-Ended Coaxial Probe JF - International Journal of Engineering and Technology N2 - Broadband dielectric measurement methods based on vector network analyzer coupled with coaxial transmission line cell (CC) and open-ended coaxial probe (OC) are simply reviewed, by which the dielectric behaviors in the frequency range of 1 MHz to 3 GHz of two practical geomaterials are investigated. Kaolin after modified compaction with different water contents is measured by using CC. The results are consistent with previous study on standardized compacted kaolin and suggest that the dielectric properties at frequencies below 100 MHz are not only a function of water content but also functions of other soil state parameters including dry density. The hydration process of a commercial grout is monitored in real time by using OC. It is found that the time dependent dielectric properties can accurately reveal the different stages of the hydration process. These measurement results demonstrate the practicability of the introduced methods in determining dielectric properties of soft geomaterials. KW - Impedanzspektroskopie KW - Electromagnetic properties of porous materials KW - Koaxialkabel KW - Dielectric spectroscopy KW - open-ended coaxial probe KW - coaxial transmission line KW - real-time monitoring KW - physicochemical properties of geomaterials Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210408-43984 UR - http://www.ijetch.org/index.php?m=content&c=index&a=show&catid=58&id=838 VL - 2014 IS - volume 6, number 5 SP - 373 EP - 380 ER - TY - THES A1 - Wiedemeyer, Nina T1 - Buchfalten: Material Technik Gefüge der Künstlerbücher N2 - Bücher werden nicht erst seit ihrer industriellen Produktion aus gefalzten Papierbogen zusammengesetzt – schon mittelalterliche Codices wurden aus gefalteten Pergamenthäuten konstruiert. Fokus dieser Studie über das Medium Buch ist daher die Kulturtechnik der Faltung. Anders als in der philosophischen Auseinandersetzung mit dem Begriff der Falte, ist die Buchfalte keine anti-lineare Figur, sondern ein operationales Falzscharnier, welches Anordnungen im Buchraum bestimmt und Ornamente hervorbringt. Mediengeschichtliche Fragestellungen sind auf Analysen von Buchmaterial und Künstlerbüchern vom 19. Jahrhundert bis zur Gegenwart basiert. Mit den Büchern u.a. von Christian Boltanski, Hanne Darboven und Hans-Peter Feldmann werden Erkenntnisse über buchgeschichtliche Zusammenhänge gewonnen und das Künstlerbuch in eine Geschichte des Mediums Buch eingestellt. KW - Buch; Buchkunst; Falte; Ornament; Papier KW - Boltanski, Christian; Faltung; Feldmann, Hans-Peter; Künstlerbuch; Van de Velde, Henry Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141210-23337 UR - http://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/2252 N1 - Die Original-Arbeit (weiterführender Link) wurde auf Grund kollorierter Abbildungen zurückgezogen und mit s/w-Abbildungen neu eingestellt (Anforderung VG Wort) ER - TY - THES A1 - Wiedemeyer, Nina T1 - Buchfalten: Material Technik Gefüge der Künstlerbücher N2 - Bücher werden nicht erst seit ihrer industriellen Produktion aus gefalzten Papierbogen zusammengesetzt – schon mittelalterliche Codices wurden aus gefalteten Pergamenthäuten konstruiert. Fokus dieser Studie über das Medium Buch ist daher die Kulturtechnik der Faltung. Anders als in der philosophischen Auseinandersetzung mit dem Begriff der Falte, ist die Buchfalte keine anti-lineare Figur, sondern ein operationales Falzscharnier, welches Anordnungen im Buchraum bestimmt und Ornamente hervorbringt. Mediengeschichtliche Fragestellungen sind auf Analysen von Buchmaterial und Künstlerbüchern vom 19. Jahrhundert bis zur Gegenwart basiert. Mit den Büchern u.a. von Christian Boltanski, Hanne Darboven und Hans-Peter Feldmann werden Erkenntnisse über buchgeschichtliche Zusammenhänge gewonnen und das Künstlerbuch in eine Geschichte des Mediums Buch eingestellt. KW - Papier KW - Falte KW - Buch KW - Buchkunst KW - Ornament KW - Faltung KW - Künstlerbuch KW - Boltanski, Christian KW - Van de Velde, Henry KW - Feldmann, Hans-Peter Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140806-22527 UR - http://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/2333 N1 - Arbeit auf Grund kollorierter Abbildungen zurückgezogen und mit s/w-Abbildungen neu eingestellt (Anforderung VG Wort) ; Siehe Link zum aktuellen Dokument ER - TY - JOUR A1 - Joshi, Suraj A1 - Hildebrand, Jörg A1 - Aloraier, Abdulkareem S. A1 - Rabczuk, Timon T1 - Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate JF - Computational Materials Science N2 - This paper presents several aspects of characterization of welding heat source parameters in Goldak’s double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40% to 80% in increments of 10%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak’s double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.commatsci.2012.11.029 SP - 559 EP - 565 ER - TY - GEN A1 - Kleiner, Florian T1 - Charakterisierung des Einflusses der Wärmeleitfähigkeit von Kompositmaterialien auf die thermochemische Wärmespeicherung N2 - Mit dem stetigen Steigen des Anteils an erneuerbaren Energien wird der Einsatz von Speichern immer bedeutsamer. Neben der Speicherung elektrischer Energie ist die Speicherung anfallender solarer bzw. industrieller Wärme eine wichtige Herausforderung. Aufgrund der hohen Energiespeicherdichte kommt dabei der thermochemischen Wärmespeicherung eine entscheidende Rolle zu. Eine Klasse dieser Speichermaterialien bilden Kompositmaterialien, die aus einer offenporigen Matrix und einem darin eingelagerten Salzhydrat bestehen. Ausschlaggebend für eine hohe Speicherdichte ist bei dieser Materialklasse der schnelle Abtransport der durch Wasserdampfsorption entstandenen Wärme. Das entscheidende Kriterium für eine Anwendung als Speichermaterial ist somit die Wärmeleitfähigkeit des Materials. Im Rahmen der Arbeit wurden deshalb die Wärmeleitfähigkeiten ausgewählter Salze (NaCl, MgSO4 und ZnSO4) mit verschiedenen Kristallwassergehalten, Trägermaterialien wie Aktivkohle (Pellets und Pulver) und Zeolitpulver und an den daraus hergestellten Kompositmaterialien untersucht. Ziel war es außerdem Aussagen zu einer günstigen Materialkombination aus offenporigem Trägermaterial und Salzhydrat sowie eines geeigneten Porenfüllgrades zu treffen und Ansätze für die Modellierung der Wärmeleitfähigkeit der Komposite zu liefern. N2 - With the steady increase of renewable energies, the use of storage systems is becoming increasingly important. In addition to the storage of electrical energy, the storage of solar and industrial heat is an important challenge. Due to their high energy storage density, thermochemical heat storage materials are very promising. One class of these storage materials are composit materials, which consist of an porous matrix and an embedded salt hydrate. The decisive factor for a high storage density in this type of materials is the rapid removal of the heat generated by water vapor sorption. The decisive criterion for an application as a storage material is therefore the thermal conductivity of the material. The thermal conductivity of selected salts (NaCl, MgSO4 and ZnSO4) with different crystal water contents, carrier materials such as activated carbon (pellets and powder) and zeolite powder and the resulting composite materials were therefore investigated as part of the work. The aim was also to make statements on a favorable material combination of porous carrier material and salt hydrate as well as a suitable degree of pore filling and to provide approaches for modeling the thermal conductivity of the composites. KW - Wärmespeicher KW - Wärmeleitfähigkeit KW - Werkstoffkunde KW - Wärmespeicher KW - Wärmeleitfähigkeit KW - Hydratsalz KW - thermochemische Wärmespeicherung KW - thermochemical heat storage Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210921-44968 ER - TY - JOUR A1 - Zhao, Jiyun A1 - Jiang, Jin-Wu A1 - Wang, L. A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - Coarse-grained potentials of single-walled carbon nanotubes JF - Journal of the Mechanics and Physics of Solids N2 - Coarse-grained potentials of single-walled carbon nanotubes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - König, Reinhard A1 - Knecht, Katja T1 - Comparing two evolutionary algorithm based methods for layout generation: Dense packing versus subdivision JF - Artificial Intelligence for Engineering Design, Analysis and Manufacturing N2 - We present and compare two evolutionary algorithm based methods for rectangular architectural layout generation: dense packing and subdivision algorithms.We analyze the characteristics of the two methods on the basis of three floor plan sce- narios. Our analyses include the speed with which solutions are generated, the reliability with which optimal solutions can be found, and the number of different solutions that can be found overall. In a following step, we discuss the methods with respect to their different user interaction capabilities. In addition, we show that each method has the capability to generate more complex L-shaped layouts. Finally,we conclude that neither of the methods is superior but that each of them is suitable for use in distinct application scenarios because of its different properties. KW - Architektur KW - Informatik KW - Kremlas Y1 - 2014 UR - http://www.journals.cambridge.org/abstract_S0890060414000237 N1 - Paper is only available from the journal home page. SP - 285 EP - 299 ER - TY - JOUR A1 - Ataollahi Oshkour, Azim A1 - Talebi, Hossein A1 - Seyed Shirazi, Seyed Farid A1 - Bayat, Mehdi A1 - Yau, Yat Huang A1 - Tarlochan, Faris A1 - Abu Osman, Noor Azuan T1 - Comparison of various functionally graded femoral prostheses by finite element analysis JF - Scientific World Journal N2 - This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent. KW - Finite-Elemente-Methode KW - Hüftgelenk KW - Funktioneller Gradientenwerkstoff Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31194 ER - TY - JOUR A1 - Massaretti, Pier Giorgio T1 - Dagli inizi dell’urbanismo teorico alla città moderna. Visioni urbanistiche del totalitarismo – Italia JF - Anthologie zum Städtebau. Das Phänomen Großstadt und die Entstehung der Stadt der Moderne N2 - La prima edizione di questo testo è apparsa, in tedesco, nel volume II.2.: Anthologie zum Städtebau. Das Phänomen Großstadt und die Entstehung der Stadt der Moderne, a cura di Vittorio Magnago Lampugnani, Katia Frey, Eliana Perotti, con il sostegno di Departement Architektur der Eidgenössischen Technischen Hochschule, Zürich (Gebr. Mann Verlag, Berlin 2014, pp. 1307-1390). Previ specifici accordi con l’editore, viene qui presentata la versione originaria, in italiano, dell’intero capitolo: Modernität und Emphase. Städtebau im italienischen Faschismus, e comprendente: i) una capiente saggio introduttivo – in una versione più ampia ed articolata (comprensiva della “Bibliografia sistematica”, di riferimento) del testo in tedesco; ii) la versione in italiano del repertorio antologico di riferimento – e comprensiva di una “Scheda introduttiva”, sull’Autore-Opera, e di una selezione del testo in esame. KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170529-32228 SP - 1 EP - 45 ER - TY - THES A1 - Faschingeder, Kristian T1 - Das Unheimliche in der Stadt. Die urbane Vision Ludwig Hilberseimers N2 - Ausgangspunkt der Arbeit ist der Aspekt des Unheimlichen in jener Hochhausstadt, deren Entwurf Ludwig Hilberseimer 1924 zum ersten Mal publizierte und die später zum Synonym für die Aberrationen modernistischen Städtebaus wurde. Daraus geht die Forschungsfrage hervor, wie der Eindruck des Unheimlichen evoziert wird und an welchen Elementen des Entwurfs und/oder der Darstellung dieser festgemacht werden kann. Hier geht es nicht um eine Analyse der Intentionen des Autors der Hochhausstadt, der diese ja als Verbesserung zu den herrschenden Wohnverhältnissen anpries; stattdessen wird eine Reihe von unterschiedlichen interpretatorischen Ansätzen gewählt (von Nelson Goodmans Theorie der Notation über Norman Brysons visuelles Zeichensystem bis hin zu Adornos Negativer Dialektik; von der „Bildwissenschaft“ bis hin zur „visual theory“). In diesem Zusammenhang werden schließlich auch jene Divergenzen herausgearbeitet, die zwischen der Architektur der Moderne und der Kunst der Avantgarde herrschten. Da aufgrund der Frage nach der Bildwirkung der beiden Perspektiven der Hochhausstadt die Ästhetik des Erhabenen eine besondere Rolle spielt, reicht der Fokus der Arbeit bis in den kunst- und architekturtheoretischen Diskurs des 18. Jahrhundert zurück. Zuletzt mündet die Arbeit in eine Diskussion von Interpretation selbst und der Möglichkeit einer kritischen Architekturtheorie. N2 - The point of origin of the thesis is the issue of the uncanny in the Hochhausstadt, a project by the architect Ludwig Hilberseimer, which he published for the first time in 1924, and since then has turned into a symbol for the aberrations of modernist town planning. The research question then is, how this uncanniness is evoked and which are the elements within the drawing and/or the project, that can be made responsible for it. As such, this paper is far from an analysis that would attempt to retrace the intentions of the author of the Hochhausstadt, who himself praised his project as the solution to the most pressing problems of the contemporary city. Instead, a number of very different approaches is chosen for the interpretation (taking into account authors from the german speaking context and, most notably, from the anglo-saxon and french world). Finally, the discussion leads into a examination of interpretation itself and closes with a discussion of the possibility a critical theory of architecture. KW - Architekturtheorie KW - Moderne Architektur KW - Städtebau KW - Bildwissenschaft KW - Ästhetik KW - Ludwig Hilberseimer KW - Das Unheimliche Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140226-21333 ER - TY - THES A1 - Buchwald, Anja T1 - Der Einfluss des Kalziums auf die Kondensation von (Alumo-)Silikaten in alkali-aktivierten Bindern N2 - Es werden geopolymere und alkali-aktivierte Bindemittel definiert und ihre prinzipiellen technischen und ökologischen Eigenschaften diskutiert. KW - Bindemittel KW - Geopolymer Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140124-21046 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets JF - Computer Methods in Applied Mechanics and Engineering N2 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 98 EP - 112 ER - TY - THES A1 - Nayono, Suwartanti T1 - Development of a Sustainability-based Sanitation Planning Tool (SusTA) for Developing Countries N2 - Background and Research Goal Despite all the efforts in the sanitation sector, it is acknowledged that the world is not on track to meet the MDG sanitation target to reduce the number of people without access to sanitation by 2015. Furthermore, a large number of existing sanitation facilities in developing countries is out of order. This leads to the conclusion that, besides technical failures, the planning process in the sanitation sector was ineffective. This ineffectiveness may be attributed to the lack of knowledge of the sanitation planners about the local conditions of the sanitation project. In addition, sustainability of a technology is often approached from a fragmented perspective that often leads to an unsustainable solution. The dissertation is conducted within the framework of the Integrated Water Resources Management (IWRM) Indonesia project. The goal of this work is to contribute to the development of a methodology of a planning tool for sustainable sanitation technology. The tool is designed for sanitation planners in developing countries, where a top-down planning approach is common practice. The proposed tool enables comprehensive sustainability assessments (using the Helmholtz Concept of Sustainability as reference), taking into account local conditions. State of the Science In the planning practice, many sanitation planning tools focus on technology selection. However, it has become evident that the selection criteria for sustainable technologies are not always considered in the tools’ framework. In other cases, when the criteria are provided by the tool, there is no clear indication of the conditions to be fulfilled in order to meet these criteria. Specifically, there is no reference to what is meant by sustainable technology in a particular context and how to comprehensively assess the sustainability of different technology options. Research Methodology Developing a planning tool is an empirical process, combining theory and practical experience. Hence, the development process of such a tool requires extensive observations, particularly on the interaction between stakeholders in the sanitation sector as well as between technology and its environment. For this purpose, a case study within the project area was carried out. Pucanganom, a village representing common strategic problems in developing countries (e.g. top-down planning approaches, lack of involvement of beneficiaries in the planning process, lack of sustainability assessments) was finally selected as the case study area. After the in-depth case study, an analytical generalisation was developed to enable the tool’s application to a broader context. Results The result of this research is a new tool – the Sustainability-based Sanitation Planning Tool (SusTA). SusTA enables comprehensive sustainability assessment in its five generic steps, namely: (1) analysis of stakeholders and sanitation policy in the region, (2) distance-to-target analysis on sanitation conditions in the region, (3) examination of physical and socio-economic conditions in the project area, (4) contextualisation of the technology assessment process in the project area, and (5) sustainability-oriented technology assessment at the project level. These steps are conducted at two levels of planning – the region and the project area – in order to identify the specific problems and interests which influence the selection of a sanitation system. Each planning step is equipped with tool elements (e.g. set of indicators, household questionnaires, technology assessment matrices) to support the analysis. From the development of SusTA, it can be concluded that four elements are required for an effective and widely applicable sanitation planning tool: sustainability concept, participatory approach, contextualisation framework and modification framework. SusTA provides both a theoretical and a practical basis for assessing the sustainability of sanitation technologies in developing countries. The tool’s main advantages for decision makers in these countries are: It is simple and transparent in its steps, does not require vast amounts of data and does not need a sophisticated computer program. KW - sanitation planning, sustainable technology, sustainability assessment KW - sanitation planning KW - sustainable technology KW - sustainability assessment Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140619-22227 ER - TY - THES A1 - Nowottny, Vera T1 - Die Camera Obscura als Kondensationsmobil : Der Weg von der formalen Ästhetik in der Fotografie bis hin zum künstlerischen Akt des Atmens N2 - Über die formale Ästhetik der Auflösung in der Fotografie bis hin zum künstlerischen Akt des Atmens KW - Camera Obscura KW - Kondensation KW - Kondensation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141014-23123 ER - TY - THES A1 - Torrado, Valentina T1 - Die Präsenz des Abjekten in der zeitgenössischen Kunstproduktion N2 - Die Arbeit fokussiert die Rolle des Abjekten in der zeitgenössischen Kunst und hier insbesondere die Rolle der Künstler aus den wohlhabenden – sogenannten postindustriellen – Ländern. Die Arbeit mit abjekten Themen in der Kunstproduktion ist sehr präsent, jedoch aus einer anderen, eher individualistischen Perspektive. Die wichtigsten Orte der Kunst (Galerien, Museen, Kulturzentren) sind Räume der Legitimation dieser Art von Produktion, dabei wird das Potential der Provokation hinterfragt. Die klassische Avantgarde, besonders der Dadaismus, hat das Abjekte zu Beginn des 20. Jahrhunderts als künstlerisches Material genutzt. Das Spiel mit Grenzüberschreitungen durch die Darstellung des Verbotenen und Ekelerregenden machte das Abjekte zur produktiven Kraft auch auf sozialer Ebene, weil es als Mittel dem gesellschaftlichen Protest und der sozialen Kritik diente. KW - Abjekt KW - Ekel KW - Obdachlos Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140225-21297 ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - König, Gerhard T1 - Digital Urban Simulation: Documentation of the teaching results from the fall semester 2014 N2 - Documentation of the teaching results from the fall semester 2014 KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25125 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Gracie, Robert A1 - Yang, Shih-Wei A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Efficient Coarse Graining in Multiscale Modeling of Fracture JF - Theoretical and Applied Fracture Mechanics N2 - Efficient Coarse Graining in Multiscale Modeling of Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 126 EP - 143 ER - TY - CHAP A1 - Hijazi, Ihab Hamzi A1 - Hussein, M. H. A1 - König, Reinhard T1 - Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building T2 - 9th 3DGeoInfo Conference N2 - Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building KW - Informatik KW - bim; cad; citygml; gbxml; thermal design Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160118-25089 CY - Dubai, UAE ER - TY - JOUR A1 - Amani, Jafar A1 - Bagherzadeh, Amir Saboor A1 - Rabczuk, Timon T1 - Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method JF - Mathematical Problems in Engineering N2 - Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Amani, Jafar A1 - Saboor Bagherzadeh, Amir A1 - Rabczuk, Timon T1 - Error estimate and adaptive refinement in mixed discrete least squares meshless method JF - Mathematical Problems in Engineering N2 - The node moving and multistage node enrichment adaptive refinement procedures are extended in mixed discrete least squares meshless (MDLSM) method for efficient analysis of elasticity problems. In the formulation of MDLSM method, mixed formulation is accepted to avoid second-order differentiation of shape functions and to obtain displacements and stresses simultaneously. In the refinement procedures, a robust error estimator based on the value of the least square residuals functional of the governing differential equations and its boundaries at nodal points is used which is inherently available from the MDLSM formulation and can efficiently identify the zones with higher numerical errors. The results are compared with the refinement procedures in the irreducible formulation of discrete least squares meshless (DLSM) method and show the accuracy and efficiency of the proposed procedures. Also, the comparison of the error norms and convergence rate show the fidelity of the proposed adaptive refinement procedures in the MDLSM method. KW - Elastizität KW - Fehlerabschätzung KW - MDLSM method Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31181 ER - TY - JOUR A1 - König, Reinhard A1 - Standfest, Matthias A1 - Schmitt, Gerhard ED - Thompson, Emine Mine T1 - Evolutionary multi-criteria optimization for building layout planning: Exemplary application based on the PSSA framework JF - 32nd eCAADe Conference - Volume 2 N2 - When working on urban planning projects there are usually multiple aspects to consider. Often these aspects are contradictory and it is not possible to choose one over the other; instead, they each need to be fulfilled as well as possible. Planners typically draw on past experience when subjectively prioritising which aspects to consider with which degree of importance for their planning concepts. This practice, although understandable, places power and authority in the hands of people who have varying degrees of expertise, which means that the best possible solution is not always found, because it is either not sought or the problem is regarded as being too complex for human capabilities. To improve this situation, the project presented here shows the potential of multi-criteria optimisation algorithms using the example of a new housing layout for an urban block. In addition it is shown, how Self-Organizing-Maps can be used to visualise multi-dimensional solution spaces in an easy analysable and comprehensible form. KW - Architektur Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25139 UR - http://cumincad.scix.net/cgi-bin/works/Show?_id=ecaade2014_019&sort=DEFAULT&search=series%3aecaade year%3a2014&hits=132 SP - 567 EP - 574 ER - TY - JOUR A1 - Linnow, Kirsten A1 - Niermann, Michael A1 - Bonatz, Dennis A1 - Posern, Konrad A1 - Steiger, Michael T1 - Experimental Studies of the Mechanism and Kinetics of Hydration Reactions JF - Energy Procedia N2 - The mechanism and the kinetics of hydration reactions are important for the application of a salt hydrate as a thermochemical heat storage material. MgSO4·H2O and Na2SO4 were chosen in this study because they are both promising candidates for such an application. Considering that the hydration of these salts yields MgSO4·7H2O and Na2SO4·10H2O as the reaction products, the maximum overall heat effect can be calculated from the heat of condensation of water vapor (44 kJ mol–1) and the heats of hydration of 75 kJ·mol-1 (for MgSO4·H2O) and 81 kJ mol-1 (for Na2SO4). Based on the densities of the two hydrated phases, this results in the very high theoretical energy densities of 2.3 GJ·m-3 and 2.4 GJ·m-3, respectively, for MgSO4·7H2O and Na2SO4·10H2O. Not only the energy density is important for the dimensioning of a storage system, but also the kinetics of hydration reactions play a major role for the application as storage material. In the present study, hydration reactions under varying climatic conditions were investigated by using water vapor sorption measurements and in-situ Raman microscopy. Using the phase diagrams, it can be clearly shown that the mechanism and the kinetics depend on the climatic conditions. Below the deliquescence humidity of the lower hydrated phase the hydration proceeds as solid state reaction, whilst above the deliquescence humidity a through solution mechanism takes place. KW - Wärmespeicherung KW - Hydratation KW - Magnesiumsulfat KW - Natriumsulfat KW - hermochemical heat storage, hydration mechanism, magnesium sulfate; sodium sulfate Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31484 SP - 394 EP - 404 ER - TY - JOUR A1 - Chen, Lei A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain A1 - Limbert, Georges T1 - Explicit finite deformation analysis of isogeometric membranes JF - Computer Methods in Applied Mechanics and Engineering N2 - Explicit finite deformation analysis of isogeometric membranes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 104 EP - 130 ER - TY - JOUR A1 - Jia, Yue A1 - Anitescu, Cosmin A1 - Ghorashi, Seyed Shahram A1 - Rabczuk, Timon A1 - Dias-da-Costa, D. T1 - Extended Isogeometric Analysis for Material Interface Problems JF - Journal of Applied Mathematics N2 - Extended Isogeometric Analysis for Material Interface Problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - THES A1 - Göbel, Michael T1 - FASER-KUNSTSTOFF-METALL-GLAS-HYBRIDSYSTEME UND DEREN EINSATZ IN TRAGENDEN KONSTRUKTIONEN N2 - Die Entwicklung von Hybridtechnologien führt zu vielen neuartigen und effizienten Anwen-dungen. Hybridtechnologien kommen immer dann zum Einsatz, wenn die ausschließliche Nutzung einer Technologie oder eines Werkstoffs nicht zum gewünschten Ergebnis führt. Dann kann durch Kombination unterschiedlicher Werkstoffe oder Technologien ein System geschaffen werden, das in seiner Konfiguration ein Optimum an Eigenschaften darstellt. Im Bauwesen geht die Entwicklung schon seit jeher in Richtung von immer schlankeren ar-chitektonisch ansprechenden Konstruktionen. In der gegenwärtigen Entwicklung ermöglichen hochtechnologische Kunststoffe und Faserwerkstoffe, wie z. B. Kohlenstofffasern, sehr schlanke, leichte und dennoch hochtragfähiger Konstruktionen. Der wirtschaftliche Aspekt bei der Entwicklung von Tragsystemen bzw. -strukturen erfordert dabei in fast allen Fällen eine kostengünstig effiziente Ausbildung und die Optimierung von Trageigenschaften und Kostenfaktoren. Daher besteht oft die Anforderung nach einem Verbundsystem, bei dem unterschiedliche Materialien in der Art miteinander kombiniert werden, dass jeder Werkstoff für eine bestimmte Beanspruchung angeordnet wird und sein Tragfähigkeitspotenzial optimal ausschöpft. Im Rahmen dieser Arbeit werden an konkreten Beispielen Möglichkeiten aufge-zeigt, Hochtechnologiewerkstoffe in effizienter Art und Weise zu nutzen. Der Kunststoff-Faser-Verbundwerkstoff stellt eine Möglichkeit dar, den als solches nur für dünnschichtige Klebverbindungen nutzbaren Klebstoff in seinen Anwendungsmöglichkeiten zu erweitern. Die Fasern wirken dabei dem mechanischen Schwachpunkt des Klebstoffs, einer nur geringen Zugfestigkeit, effektiv entgegen. Mit faserverstärkten Klebstoff können Anwendungen realisiert werden, bei denen der Klebstoff auch zur Zugkraftübertragung ge-nutzt wird. Zusätzlich bieten Füllstoffe eine Möglichkeit, die Steifigkeit des Klebstoffs zu stei-gern, was für viele mechanischen Beanspruchungen Vorteile mit sich bringt. Die Kombination aus einem partikelgefüllten und zusätzlich faserverstärkten Klebstoff führt zu einem Ver-bundwerkstoff, der für viele unterschiedliche Anwendungen geeignet ist. Praktische Anwen-dungsmöglichkeiten finden sich in der Herstellung von Fassadenelementen, wo der faserver-stärkte Klebstoff zur Verbindung von Aluminiumhohlprofilen verwendet wird. Weitere Anwen-dungsgebiete erstrecken sich auf die Zugkraftbewehrung von Betontragelementen, bei denen der faserverstärkte Klebstoff die Rolle einer Zugbewehrung an der Betonoberfläche übernimmt. Alu-CFK-Hybridelemente ermöglichen die Herstellung sehr effizienter Tragsysteme, bei de-nen Gewichtsreduzierung der Tragstruktur und Kosteneinsparungen im Betrieb des Bauwerks gleichermaßen ermöglicht werden. Die CFK-Lamellen werden dabei in den am stärksten längskraftbeanspruchten Bereichen eines Aluminiumtragelementes angeordnet, wodurch sich die Biegetragfähigkeit des dann hybriden Tragelements signifikant erhöht. In der Folge können Gewichtsreduzierungen, verglichen mit herkömmlichen Aluminiumtragelementen, erzielt werden. Weiterhin können die Querschnittsaußenmaße bei Alu-CFK-Hybridelementen deutlich reduziert werden. In der Folge vereinfachen sich der Transport und die Montage dieser Art Tragwerke, was besonders bei fliegenden Bauten einen wesentlichen Vorteil dar-stellt. Der Einsatz von Glas-Kunststoff-Hybridelementen ermöglicht die Konstruktion transparenter Tragstrukturen in einer optisch einzigartigen Qualität. Die Konstruktion eines Glas-Kunststoff-Hybridelementes ermöglicht ein redundant wirkendes Tragverhalten, bei dem die Steifigkeit und optische Qualität des Glases optimal im Tragsystem genutzt werden können. Der Kunst-stoff stellt eine Art Sicherheitselement dar und übernimmt im Falle eines Glasbruchs die Tragwirkung des Glases. Die Eigenschaft der Vorankündigung eines Systemversagens stellt die Grundlage für eine baupraktische Anwendung des Glas-Kunststoff-Hybridelementes als statisches Tragsystem dar. Durch die Redundanz des Tragverhaltens von Glas-Kunststoff-Hybridelementen ist das Versagen dieser Tragstruktur durch optische oder strukturelle An-zeichen erkennbar und eine Bemessung somit möglich. Für die mechanische Analyse grundlegender Zusammenhänge in Hybridsystemen können ingenieurmäßige, analytische und numerische Betrachtungen durchgeführt werden. Die in-genieurmäßigen Betrachtungen sind sehr gut geeignet, um Abschätzungen zu treffen, die in später durchgeführten experimentellen Bauteiluntersuchungen oft auch ihre Bestätigung fan-den. Bei Detailbetrachtungen, wie z. B. der Analyse eines nichtlinearen Spannungsverlaufes in mechanisch beanspruchten Klebfugen, bietet eine numerische Betrachtung mittels FEM Vorteile, da sie eine sehr detaillierte Auswertung in Bereichen mit hohen Spannungsgradien-ten ermöglicht. Durch die Anwendung der FEM ist es möglich, Strukturen in unterschiedlichen Skalierungsbereichen zu analysieren und dabei auch Bereiche einzubeziehen, die für experimentelle Untersuchungen nur sehr schwer zugänglich sind. Genaue Kenntnisse über das Materialverhalten der zu analysierenden Stoffe stellen dabei eine wesentliche Grundlage für die Erstellung qualitativ hochwertiger Rechenmodelle dar. KW - Klebstoff-Faser-Verbundwerkstoff; Alu-Carbon-Hybridelement; Glas-Kunststoff-Hybridelement; ANSYS; CFK; Klebverbindungen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131217-19909 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Camanho, P.P. T1 - Finite strain fracture of 2D problems with injected anisotropic softening elements JF - Theoretical and Applied Fracture Mechanics N2 - Finite strain fracture of 2D problems with injected anisotropic softening elements KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JFULL ED - Engell, Lorenz ED - Siegert, Bernhard T1 - Focus Producing Places N2 - Producing places is a twofold topic. It can refer to places as sites that produce something, that are productive, that have operations unfold, or actions happen, or objects emerge. Or it can refer to the fabrication of places as specific entities themselves. With the extended availability and practicability of digital positioning, locating, and tracking systems, it has become evident that places are not just there, but that they are generated, that they are subject to mediatechnological operations and effects. Nonetheless, and at the same time, the aspect of places as being productive has also attracted considerable attention. Furthermore, in either perspective, a media-theoretical challenge has come up. It invests two different threads within the realm of conceptualizing not only space, but precisely place under conditions of media, both of them leading way back into the evolution of media societies and cultural technologies. KW - Medienwissenschaft KW - Kulturwissenschaft Y1 - 2014 U6 - http://dx.doi.org/10.28937/ZMK-5-1 SN - 2366-0767 N1 - Lizenz CC-BY-NC-SA 3.0 VL - 2014 IS - 5.2014, Heft 1 PB - Felix Meiner Verlag CY - Hamburg ER - TY - JOUR A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon A1 - Lam-Phat, T. A1 - Ho-Huu, V. A1 - Phung-Van, P. T1 - Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3) JF - Theoretical and Applied Fracture Mechanics N2 - Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3) KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Xu, G. A1 - Mourrain, B. A1 - Galligo, A. A1 - Rabczuk, Timon T1 - High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods JF - Computational Mechanics N2 - High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - THES A1 - Kalugila, Shubira T1 - HOUSING INTERVENTIONS AND ITS INFLUENCE ON URBAN DEVELOPMENT: Opportunities and Challenges in Mixed Informal Settlements, in Dar es Salaam - Tanzania N2 - Rapid urbanisation that is not accompanied by socio-economic development strains the capacity of local and national governments to provide even basic services such as shelter. Informal settlements i.e. settlements not built or developed according to the formal regulations have become a solution to many urban dwellers in developing countries. In Tanzania informal settlements accommodate people from low, middle and high income groups. The study explores the nature of potentials and challenges posed by the existence of mixed socio-economic groups in informal settlements, including an assessment of what can be done to optimise utilisation of potentials and mitigation of conflicts. Using a case study strategy, the study was conducted in Dar es Salaam city focusing on Makongo mixed informal settlement. The results show that mixed informal settlements are as a result of several factors including uncoordinated energies of people. The urban development forces that bring change in the development of the city are stronger than the public states capacity to coordinate and manage them. Informal settlements also offer user-friendly land tenure, flexibility in house construction and proximity to livelihoods. Other factors include the nature of socio-economic living patterns and extension of urban boundaries. Community members operate using social norms. Advantages of mixed informal settlements include availability of plots according to needs and affordability while a disadvantage is, people of different socio-economic groups perceive problems differently. For policies to be effective, their formulation should be derived from what is happening on the ground i.e. addressing informal settlements according to their heterogeneity. Moreover, empowered local authorities can assist in implementing national development plans; also actors in land development including government institutions, non-governmental institutions, financial institutions, private sector, professionals, political leaders, research institutions, policy-makers and training institutions need to recognise, understand and respect each other’s roles, and pull resources together to minimise problems related to informality in land development; utilise potentials and minimise challenges in mixed informal settlements in Dar es Salaam. Key words: Informal settlements, land development, urbanisation KW - Informal Settlements KW - Land development KW - Verstädterung KW - Urbanität KW - Urbanisation KW - Landentwicklung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140902-22930 ER - TY - JOUR A1 - Luu, M. A1 - Martinez-Rodrigo, M.D. A1 - Zabel, Volkmar A1 - Könke, Carsten T1 - H∞ optimization of fluid viscous dampers for reducing vibrations of high-speed railway bridges JF - Journal of Sound and Vibration N2 - H∞ optimization of fluid viscous dampers for reducing vibrations of high-speed railway bridges KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 2421 EP - 2442 ER - TY - THES A1 - Chilingaryan, Naira T1 - Industrial Heritage: In-Between Memory and Transformation N2 - Exploratory Research into Transformation Processes of Former Industrial Complexes of Leipziger Baumwollspinnerei (Leipzig) and Mattatoio di Testaccio (Rome); New Meanings of Industrial Heritage Physical manifestations of the Industrial Revolution left a permanent imprint on the complexion of cities. Abandonment that followed the deindustrialization contributed to an estrangement, turning derelict industrial spaces and run‐down factories into a ballast to conjure with. At present, industrial heritage management applies flexibility and creativity, partially overcoming the essentially traditional paradigm of heritage preservation. This approach permits sustainable conservation – utilization and integration of disused industrial constructs in the contemporary urban landscape. Being a part of the European cultural stock, industrial heritage is an exciting and unique setting from many perspectives. It is defined and consumed by many markets, ranging from the industrial heritage tourism to the market of special events and festivals. Reused industrial buildings and factories come into view as products of post‐industrial societies, fitting to the Western post‐industrial (consumer) culture, offering a field of activities that are at an interface between the industrial history and contemporary socio‐cultural milieu. Alteration of values, growth of new roles and definitions of industrial heritage, generated by functional restructuring, is a subject which is often left behind the general discussion about sustainable conservation and adaptive reuse of industrial heritage. Yet, in the modified state, industrial heritage is very complex to understand and to define. By conducting a desk and a case study research of former industrial complexes – Leipziger Baumwollspinnerei and Mattatoio di Testaccio, this doctoral thesis aims to identify industrial heritage as a contemporary (post‐industrial) concept. Observation of ideas, values and definitions that emerge as a consequence of the transformation and re‐conceptualization of industrial heritage are intended to raise awareness and appreciation of industrial heritage in the full richness of its contemporary interpretation. KW - Denkmal KW - industrial heritage KW - Nutzungsänderung KW - Industrie KW - Kultur KW - Transformation KW - Wahrnehmung KW - environmental perception KW - adaptive reuse KW - sustainable conservation KW - representation KW - built environment Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140624-22291 ER - TY - JOUR A1 - Masood, R. A1 - Kharal, M. K. N. A1 - Nasir, A.R. T1 - Is BIM Adoption Advantageous for Construction Industry of Pakistan? JF - Procedia Engineering N2 - Lack of Information technology applications on construction projects lead to complex flow of data during project life cycle. Building Information Modeling (BIM) has gained attention in the Architectural, Engineering and Construction (AEC) industry, envisage the use of virtual n-dimensional (n-D) models to identify potential conflicts in design, construction or operational of any facility. A questionnaire has been designed to investigate perceptions regarding BIM advantages. Around 102 valid responses received from diversified stakeholders. Results showed very low BIM adoption with low level of ‘Buzz’. BIM is a faster and more effective method for designing and construction management, it improves quality of the design and construction and reduces rework during construction; which came out as the top thee advantages according to the perception of AEC professionals of Pakistan.BIM has least impact on reduction of cost, time and human resources. This research is a bench mark study to understand adoption and advantageous of BIM in Pakistan Construction Industry. KW - Building Information Modeling KW - Bauindustrie KW - Pakistan KW - BIM, BIM Adoption, BIM Advantages , Construction Industry, Pakistan Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31509 SP - 229 EP - 238 ER -