TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Liang, Chao A1 - Rabczuk, Timon T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared. KW - Energiespeicherung KW - Druckluft KW - Kaverne KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31726 ER - TY - CHAP A1 - Rueppel, Uwe A1 - Meißner, Udo F. A1 - Greb, Steffen T1 - A Petri Net based Method for Distributed Process Modelling in Structural Engineering N2 - The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Petri-Netz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1338 ER - TY - JOUR A1 - Rebolj, D. T1 - A Product Model of a Road N2 - Many errors and delays frequently appear when data is exchanged between particular tasks in the lifecycle of the road. Inter-task connections are therefore of great importance for the quality of the final product. The article describes a product model of a road wich is the kernel of an integrated information system intended to support all important stages of the road lifecycle: design, evaluation (through different analysis procedures), construction, and maintainance. Since particular tasks are often executed at different places and in different companies, the interconnections are supported by a special metafile which contains all specific data of the product model. The concept of the integrated system is object and component oriented. Additionally, existing conventional program packages are included to support some common tasks (methods). A conventional relational database system as well as an open spatial database system with the relevant GIS functionality are included to support the data structures of the model. KW - Straße KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4584 ER - TY - CHAP A1 - Olivier, A. H. T1 - An application-centred framework for distributed engineering applications N2 - The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Framework Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1353 ER - TY - CHAP A1 - Raue, Erich T1 - Anwendung der mathematischen Optimierung bei der Modellbildung und Analyse des nichtlinearen Tragverhaltens von Stahlbetontragwerken N2 - In den zurückliegenden Jahren wurden an der Professur Massivbau I umfangreiche Untersuchungen zur Modellbildung und rechnerischen Erfassung des Tragverhaltens von Tragwerken und Tragwerkselementen aus Stahlbeton und Spannbeton unter Berücksichtigung von Rißbildungen und Plastizierungen durchgeführt. Diesen Untersuchungen liegt als einheitliches methodisches Konzept der mathematischen Problembeschreibung und Problemlösung die mathematische Optimierung zugrunde. Bereits anläßlich des IKM 1994 [1] hatte der Verfasser Gelegenheit, zusammenfassend über Ergebnisse bei der Anwendung der mathematischen Optimierung im Bereich der nichtlinearen Tragwerksanalyse zu berichten. Der vorliegende Beitrag, soll einen Überblick über seitdem untersuchte Problemkreise und dabei gewonnene Ergebnisse und Erfahrungen vermitteln. Bei der Anwendung der linearen und quadratischen Optimierung sind wegen der geforderten Linearität der Nebenbedingungen Vereinfachungen bei der Modellbildung des stahlbetonspezifischen Tragverhaltens unumgänglich. Besonders betroffen sind die Ansätze zur Beschreibungen des Materialverhaltens. Durch den Einsatz allgemeiner nichtlinearer mathematischer Optimierungsmethoden lässt sich eine methodisch bedingte Linearisierung des Berechnungsmodells umgehen.... KW - Tragwerk KW - Stahlbeton KW - Tragverhalten KW - Nichtlineares Phänomen KW - Modellierung KW - Optimierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3717 ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg A1 - Schüler, H. T1 - Anwendung der mathematischen Optimierung bei der physikalisch und geometrisch nichtlinearen Analyse und Bemessung seismisch beanspruchter Tragwerke N2 - Moderne Bemessungskonzepte für seismisch beanspruchte Hochbauten, wie die Methode der Kapazitäts-bemessung, planen inelastisches Verhalten einzelner Bereiche der Konstruktion beim Entwurf bewußt ein, um so einen Teil der durch das Beben eingetragenen Energie als inelastische Formänderungsarbeit zu absorbieren. Wird bei Akzeptanz inelastischen Verhaltens eine bestimmte Belastungsintensität, die als adaptive Grenzlast oder Einspiellast bezeichnet wird, überschritten, kann es infolge zyklischer Einwirkungen zu einer unbe-grenzten Akkumulation inelastischer Deformationen kommen. Die adaptive Grenzlast stellt damit für zyklische Einwirkungen eine geeignete Kenngröße zur Bewertung der Tragwerksqualität dar, bei der neben der Sicherung des Gleichgewichts ein bestimmtes Schädigungsniveau nicht überschritten wird. Im vorliegenden Beitrag werden die Grundzüge eines Bemessungs- und Nachweiskonzeptes für seismisch beanspruchte Stahlbetontragwerke, das unter Einbeziehung der Grundprinzipe der Kapazitätsbemessung von einem einheitlichen Kriterium zur Beschreibung des Grenzzustandes der Tragfähigkeit auf der Basis der adaptive Grenzlast ausgeht, vorgestellt. Dabei ist die Abschätzung der Verformungen notwendiger Bestandteil des Nachweis- bzw. Bemessungskonzeptes. Bei Druckgliedern ist die Berücksichtigung des Einflusses der Verformungen notwendiger Bestandteil des Bemessungskonzeptes. Entsprechende Erweiterungen der Berechnungsmodelle zur Berücksichtigung des Einflusses geometrisch nichtlinearer Effekte im Sinne einer Theorie II. Ordnung werden vorgestellt. KW - Bauwerk KW - Erdbebenbelastung KW - Nichtlineares Phänomen KW - Optimierung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4421 ER - TY - THES A1 - Semar, Olivier T1 - Anwendung der Perkolationstheorie zur Analyse des suffosiven Partikeltransportes T1 - An application of the percolation theory to analyse suffusive particle transport N2 - Die vorliegende Arbeit beschäftigt sich mit der geometrischen Suffosionsbeständigkeit von Erdstoffen. Mit dem wahrscheinlichkeitstheoretischen Ansatz der Perkolationstheorie wurde ein analytisches Verfahren gewählt, mit dem suffosive Materialtransportprozesse modelliert und quantifiziert werden können. Mit dem verwendeten Perkolationsmodell wurde eine beliebige Porenstruktur eines realen Erdstoffes im 3-Dimensionalen modelliert. Mögliche Materialtransportprozesse innerhalb der modellierten Porenstruktur wurden anschließend simuliert. Allgemein gültige Gesetzmäßigkeiten wurden hergeleitet und Grenzbedingungen formuliert. Diese sind vom Erdstoff unabhängig und beschreiben Zusammenhänge zwischen Materialtransport und Porenstruktur. Anwendbar sind diese Ergebnisse auf homogene, isotrope und selbstähnliche Erdstoffgefüge. Aussagen über konkrete Erdstoffe können über die Transformationsmethode erfolgen. Für die Verwendung der Transformationsmethode ist vorab die relevante Porenstruktur, d. h. die Porenengstellenverteilung, zu ermitteln. N2 - This thesis presents a new approach to analyze the geometrical suffusion stability of soils. With the percolation theory an analytical method is used which takes a 3D pore structure into account. This theory is a branch of the probability theory dealing with properties of random media. Characteristic parameters of the pore structure in 3D can be denoted. Possible granular structural change of arbitrary soils can be simulated and quantified. Self similarity as well as isotropic and homogeneous conditions are therefore assumed. General mathematical interrelationships and limiting conditions of granular structural change were derived. These interrelationships and limiting conditions are irrespective of the soil. They describe the relationship between potential movement of fines and the related pore structure. This requires that in advance the relevant pore structure has to be calculated. Relevant for transport and clogging of fines is the constriction size distribution of the quasi static granular structure. T3 - Schriftenreihe Geotechnik - 23 KW - Perkolationstheorie KW - Suffosion KW - Modellierung KW - Computersimulation KW - percolation theory KW - suffusion KW - modelling KW - simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20101124-15252 UR - http://vg01.met.vgwort.de/na/381cd1300fab4e448c1914ae18e63f1d ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian T1 - Application of the "fictious crack model" to meshless crack growth simulations N2 - In this paper a meshless component is presented, which internally uses the common meshless interpolation technique >Moving Least Squares<. In contrast to usual meshless integration schemes like the cell quadrature and the nodal integration in this study integration zones with triangular geometry spanned by three nodes are used for 2D analysis. The boundary of the structure is defined by boundary nodes, which are similar to finite element nodes. By using the neighborhood relations of the integration zones an efficient search algorithm to detected the nodes in the influence of the integration points was developed. The components are directly coupled with finite elements by using a penalty method. An widely accepted model to describe the fracture behavior of concrete is the >Fictitious Crack Model< which is applied in this study, which differentiates between micro cracks and macro cracks, with and without force transmission over the crack surface, respectively. In this study the crack surface is discretized by node pairs in form of a polygon, which is part of the boundary. To apply the >Fictitious Crack Model< finite interface elements are included between the crack surface nodes. The determination of the maximum principal strain at the crack tip is done by introducing an influence area around the singularity. On a practical example it is shown that the included elements improve the model by the transmission of the surface forces during monotonic loading and by the representation of the contact forces of closed cracks during reverse loading. KW - Bruchmechanik KW - Rissbildung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3359 ER - TY - CHAP A1 - Hartmann, Ulrich C. T1 - Collaboration in AEC Design : Web-enabling Applications using Peer-to-Peer Office Communicator N2 - A market analysis conducted by Gartner Dataquest in August 2001 has shown the typical characteristics of the AEC design process. High volatility in membership of AEC design groups and members dispersed over several external offices is the common collaboration scenario. Membership is most times short lived, compared to the overall duration of the process. A technical solution has to take that into account by making joining and leaving a collaborative work group very easy. The modelling of roles of collaboration between group members must be based on a commonly understood principle like the publisher / subscriber model, where the individual that is responsible for the distribution of vital information is clear. Security issues and trust in the confidentiality of the system is a central concern for the acceptance of the system. Therefore, keeping the subset of data that will be published under the absolute control of the publisher is a must. This is not the case with server-based scenarios, sometimes even due to psychological reasons. A loosely bound Peer-to-Peer network offers advantages over a server-based solution, because of less administrative overhead and simple installation procedures. In a peer-to-peer environment, a publish/subscribe role model can be more easily implemented. The publish/subscribe model matches the way AEC processes are modelled in real world scenarios today, where legal proof of information exchange between external offices is of high importance. Workflow management systems for small to midsize companies of the AEC industry may adopt the peer-to-peer approach to collaboration in the future. Further investigations are being made on the research level (WINDS) by integrating the viewer and redlining application Collaborate! into a collaborative environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Kommunikationsmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1386 ER - TY - CHAP A1 - Miles, John A1 - Joita, Liviu A1 - Burnap, Peter T1 - Collaborative Engineering: Virtual Teams in a Grid Environment Supporting Consortia in the Construction Industry N2 - In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI). KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1362 ER - TY - CHAP A1 - Wittwer, Christof T1 - ColSim - Eine modulare Simulationsumgebung zur Entwicklung von Regelungsalgorithmen für Embedded Systems in Energieversorgungsanlagen N2 - Am Fraunhofer ISE wurde in den letzten Jahren die Simulationsumgebung ColSim entwickelt, die sich speziell zur Untersuchung von Regelungssystemen in Gebäudeenergieversorgungssystemen eignet. Zielsetzung des Designs ist die Umsetzung des simulationsbasierten Regelungsentwurfs, der einen unmittelbaren Einsatz der Regelungsmodule auf sog. Enbedded Systems gestattet. Das Simulationswerkzeug zeichnet sich durch die modulare offene Struktur aus, die eine flexible Erweiterung ermöglicht (vgl. TRNSYS [1]). Die Implementierung erfolgte im genormten ANSI-C Code, der einen plattform- unabhänigen Einsatz gewährleistet. Entwicklungsplattform stellt derzeit ein Linux Cluster dar, als Zielplattform wurden bisher sowohl eingebettete Industrie-PCs wie auch klassische Micro- controller Boards verwendet. Die Entwurfsmethode wird anhand einer Systemregelung für eine solarthermische Anlage mit 120m2 Kollektorfläche (SolarThermie2000 Anlage) demonstriert, bei der ein vernetztes Regelungssystem mit Internet-Integration zum Einsatz kommt. Das Regelungssystem verfügt seinerseits über ein Betriebssystem (schlankes embedded linux system), das die Kommunikation nach aussen gestattet. Das Regelungssystem vefügt somit über Klima- bzw Strahlungsdaten, die für den Regelungsprozess von Bedeutung sind. Die externen Informationen können einerseits zur >Einsparung< von Sensorik genutzt werden, andererseits gestatten sie den Einsatz von prädiktiver Regelungsmethodik, um den fossilen (Nachheiz-) Energieeinsatz zu minimieren. Mit Hilfe von simulationstechnischen Systemstudien kann ein adaptives Verhalten des Regelungssystems erprobt werden, das eine selbstständige Strecken- identifikation realieren kann. Beispielsweise soll beim näher beschriebenen solarthermischen System die Totzeit bestimmt werden, die sich infolge der Verrohrung zwischen Speicher und Entladegruppe ergibt. Der Betrieb der Entlade- pumpe wird einerseits in Abhängigkeit der Verfügbarkeit des Pufferwassers erfolgen, andererseits in Abhängigkeit des erwarteten Zapfvolumens durch den Verbraucher. Die vernetzten Regelungssysteme, die auf Basis der Simulationsmodelle ent- wickelt werden, sollen künftig die gesamte Energieflußanalyse des Gebäudes realisieren, wobei eine transparente Darstellung des Systemverhaltens auf Basis einer Internet Visualisierung erfolgt. Der Betreiber und Nutzer wird unmittel- bar durch die Online Dienste (SMS,Email,Fax) über das (fehlerhafte) Anlagen- verhalten informiert. Gerade die sensitiven regenerativen Systeme neigen durch ihre Komplexität zu Störungen, die oftmals nicht erkannt werden, weil die konventionellen Teilsysteme (z.B. Ergasbrenner) den Ausfall in der Regel >kompensieren<. KW - Gebäude KW - Energieversorgung KW - Regelungssystem KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3803 ER - TY - CHAP A1 - Baranski, Jacek A1 - Boron, Jacek T1 - Computer Modeling of the Joints for WGP Construction Systems N2 - Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used. KW - Gebäude KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2935 ER - TY - THES A1 - Hauschild, Thomas T1 - Computer Supported Cooperative Work-Applikationen in der Bauwerksplanung auf Basis einer integrierten Bauwerksmodellverwaltung T1 - Computer Supported Cooperative Work Applications for the Design of Buildings based on an integrated Building Model Management N2 - Gegenstand der vorliegenden Arbeit ist die Konzeption und prototypische Umsetzung von Techniken des Computer Supported Cooperative Work (CSCW) im Rahmen einer integrierten objektorientierten und dynamischen Bauwerksmodellverwaltung zur Unterstützung der Bauwerksplanung. Die Planung von Bauwerken ist durch einen hohen Grad an Arbeitsteiligkeit, aber auch durch eine schwache Strukturierung der ablaufenden Prozesse gekennzeichnet. Besonders durch den Unikatcharakter des Planungsgegenstands \'Bauwerk\' ergeben sich signifikante Unterschiede zum Entwurf anderer, durch Serienfertigung produzierter Industriegüter. Zunehmend wird die Planung von Bauwerken in Virtual Enterprises ausgeführt, die sich durch eine dynamische Organisationsstruktur, geographische Verteilung der Partner, schwer normierbare Informationsflüsse und eine häufig stark heterogene informationstechnische Infrastruktur auszeichnen. Zur rechnerinternen Repräsent! ation des Planungsgegenstands haben sich objektorientierte Bauwerksmodelle bewährt. Aufgrund der Veränderlichkeit der Bauwerke und deren rechnerinterner Repräsentation im Laufe des Bauwerkslebenszyklus ist eine dynamische Anpassung der Modelle unumgänglich. Derartige in Form von Taxonomien dargestellte dynamische Bauwerksmodellstrukturen können gemeinsam mit den in Instanzform vorliegenden konkreten Projektinformationen in entsprechenden Modellverwaltungssystemen (MVS) gehandhabt werden. Dabei wird aufgrund der Spezialisierung und Arbeitsteilung im Planungsprozess von einer inhaltlich verknüpften Partialmodellstruktur, die räumlich verteilt sein kann, ausgegangen. Die vorgeschlagenen Methoden zur Koordinierung der Teamarbeit in der Bauwerksplanung beruhen auf der Nutzung von CSCW–Techniken für \'Gemeinsame Informationsräume\' und \'Workgroup Computing\', die im Kontext der als Integrationsbasis fungierenden Modellverwaltungssysteme umgesetzt werden. Dazu werden die zur d! ynamischen Bauwerksmodellierung erforderlichen Metaebenenfunk! tionalitäten sowie Ansätze zur Implementierung von Modellverwaltungskernen systematisiert. Ebenso werden notwendige Basistechniken für die Realisierung von MVS untersucht und eine Architektur zur rollenspezifischen Präsentation dynamischer Modellinhalte vorgestellt. Da klassische Schichtenmodelle nicht auf die Verhältnisse in Virtual Enterprises angewendet werden können, wird eine physische Systemarchitektur mit einem zentralen Projektserver, Domänenservern und Domänenclients vorgestellt. Ebenso werden Techniken zur Sicherung des autorisierten Zugriffs sowie des Dokumentencharakters beschrieben. Zur Unterstützung der asynchronen Phasen der Kooperation wird der gemeinsame Informationsraum durch Mappingtechniken zur Propagation und Notifikation von Änderungsdaten bezüglich relevanter Modellinformationen ergänzt. Zur Unterstützung synchroner Phasen werden Techniken zur Schaffung eines gemeinsamen Kontexts durch relaxierte WYSIWIS–Präsentationen auf Basis der Modellinformationen! verbunden mit Telepresence–Techniken vorgestellt. Weiterhin werden Methoden zur Sicherung der Group–Awareness für alle Kooperationsphasen betrachtet. N2 - The thesis covers the conceptual design and the prototypical realisation of Computer Supported Cooperative Work (CSCW)– techniques within the scope of an integrated, object-oriented, dynamic model management system for the support of building planning activities. The planning of buildings is characterised by a high degree of collaboration but by a weak structuring of the processes, too. Significant differences between the design of buildings and industrial goods produced by series production are implied by the uniqueness of a building. Increasingly, the planning of buildings is accomplished by Virtual Enterprises. These are characterised by a dynamic organisation structure, geographic dispersion of the involved planning experts, information flows, which are hard to standardise, and a frequently very heterogeneous information-technology infrastructure. Object oriented building models have proven to be a suitable base for! the binary representation of planning subject information. Due to the changeability of both building structures and their binary representation during the building life cycle, a dynamical adaptation of the models is indispensable. Dynamic building models, which are represented by taxonomic information, can be handled together with actual project information, which is stored in taxonomy instances within an appropriate model management system. Due to the specialisation and the division of labour in the planning process, a semantic linked but spatial distributed partial model structure is applied. The recommended methods for the coordination of teamwork in the planning process are based on the application of CSCW-techniques for \'Shared Information Spaces\' and \'Workgroup Computing\' in the context of model management systems acting as an foundation for planning information integration. The required meta level functionalities for dynamic building modelling and appropriate! implementation approaches for modelling kernels are systemat! ised. The necessary base techniques for the realisation of model management systems are explored. An architecture for the role specific presentation of dynamic model content is introduced, too. Due to the inadequacy of conventional multi-tier models for an application in Virtual Enterprises, an appropriate physical system architecture with a central project server, domain servers and domain clients is introduced. The thesis covers techniques, which ensure the authorised access to information and the authenticity of planning documents, too. For an adequate support of the asynchronous phases of collaboration, the Shared Information Space is supplied with mapping mechanisms for the propagation and user notification of changes in the relevant planning information. Synchronous collaboration can be performed by means of relaxed WYSIWIS-presentations connected with telepresence mechanisms in order to create a shared context for the planners. Furthermore, methods for the provis! ion of group-awareness for all co-operation phases are treated. KW - Computer Supported Cooperative Work KW - Groupware KW - Bauwerk KW - Modellierung KW - Virtuelles Unternehmen KW - Verteiltes System KW - Domänenmodelle KW - Kooperatives Arbeiten KW - CSCW KW - Dynamische Modellverwaltungssysteme KW - Dynamische Schemaevolution KW - Building Modelling KW - Domain Models KW - Co-operative Work KW - Dynamic Model Management Systems KW - Dynamic Schema Evolution Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040311-672 ER - TY - JOUR A1 - Gürlebeck, Klaus A1 - Legatiuk, Dmitrii A1 - Nilsson, Henrik A1 - Smarsly, Kay T1 - Conceptual modelling: Towards detecting modelling errors in engineering applications JF - Mathematical Methods in Applied Sciences N2 - Rapid advancements of modern technologies put high demands on mathematical modelling of engineering systems. Typically, systems are no longer “simple” objects, but rather coupled systems involving multiphysics phenomena, the modelling of which involves coupling of models that describe different phenomena. After constructing a mathematical model, it is essential to analyse the correctness of the coupled models and to detect modelling errors compromising the final modelling result. Broadly, there are two classes of modelling errors: (a) errors related to abstract modelling, eg, conceptual errors concerning the coherence of a model as a whole and (b) errors related to concrete modelling or instance modelling, eg, questions of approximation quality and implementation. Instance modelling errors, on the one hand, are relatively well understood. Abstract modelling errors, on the other, are not appropriately addressed by modern modelling methodologies. The aim of this paper is to initiate a discussion on abstract approaches and their usability for mathematical modelling of engineering systems with the goal of making it possible to catch conceptual modelling errors early and automatically by computer assistant tools. To that end, we argue that it is necessary to identify and employ suitable mathematical abstractions to capture an accurate conceptual description of the process of modelling engineering systems. KW - Angewandte Mathematik KW - Angewandte Informatik KW - Ingenieurwissenschaften KW - Modellierung KW - engineering KW - abstraction KW - modelling KW - formal approaches KW - type theory Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200110-40614 UR - https://onlinelibrary.wiley.com/doi/abs/10.1002/mma.5934 SP - 1 EP - 10 ER - TY - JOUR A1 - Legatiuk, Dmitrii A1 - Weisz-Patrault, Daniel T1 - Coupling of Complex Function Theory and Finite Element Method for Crack Propagation Through Energetic Formulation: Conformal Mapping Approach and Reduction to a Riemann–Hilbert Problem JF - Computational Methods and Function Theory N2 - In this paper we present a theoretical background for a coupled analytical–numerical approach to model a crack propagation process in two-dimensional bounded domains. The goal of the coupled analytical–numerical approach is to obtain the correct solution behaviour near the crack tip by help of the analytical solution constructed by using tools of complex function theory and couple it continuously with the finite element solution in the region far from the singularity. In this way, crack propagation could be modelled without using remeshing. Possible directions of crack growth can be calculated through the minimization of the total energy composed of the potential energy and the dissipated energy based on the energy release rate. Within this setting, an analytical solution of a mixed boundary value problem based on complex analysis and conformal mapping techniques is presented in a circular region containing an arbitrary crack path. More precisely, the linear elastic problem is transformed into a Riemann–Hilbert problem in the unit disk for holomorphic functions. Utilising advantages of the analytical solution in the region near the crack tip, the total energy could be evaluated within short computation times for various crack kink angles and lengths leading to a potentially efficient way of computing the minimization procedure. To this end, the paper presents a general strategy of the new coupled approach for crack propagation modelling. Additionally, we also discuss obstacles in the way of practical realisation of this strategy. KW - Angewandte Mathematik KW - Finite-Elemente-Methode KW - Rissausbreitung KW - Modellierung KW - Bruchmechanik KW - fracture mechanics KW - crack propagation KW - coupling KW - energetic approach Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210805-44763 UR - https://link.springer.com/article/10.1007/s40315-021-00403-7 VL - 2021 SP - 1 EP - 23 PB - Springer CY - Heidelberg ER - TY - CHAP A1 - Petzold, Frank A1 - Wender, Katrin A1 - Donath, Dirk A1 - Weferling, Ulrich T1 - Das Bauwerk als Informationscontainer in den frühen Phasen der Bauaufnahme - Ausgangspunkt für die Projektentwicklung und Entwurfsformulierung N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. In dem Beitrag wird ein Konzept und prototypische Realisierung für die durchgängige Unterstützung des gesamten Bauaufnahmeprozesses für Altbausubstanz vorgestellt und diskutiert. Der Fokus liegt auf der frühe Phase in der Bauaufnahme als ein Baustein in einer gesamtheitlichen IT-gestützen Planungsumgebung eingegangen. Durch gezielte Aufnahme planungsrelevanter Parameter und Auswertung hinsichtlich Wirtschaftlichkeit und Wiederverwendbarkeit bzw. der Variantenüberprüfung von Nutungskonzepten, werden gerade in dieser Phase wesentliche Entscheidungen für eine kostengünstige Planung getroffen werden. In der Veröffentlichung wird der Fokus auf folgende Punkte gesetzt: - Strukturierung und Aufnahme der Informationen während der Erstbegehung - Skizzenhafte Abbildung als Basis für die Formulierung erster Entwurfsintensionen/ Variantenuntersuchungen - Navigations- und Informationsumgebung - gezielte Auswertungsmöglichkeiten (bspw. Wirtschaftlichkeitsberechnung, Wiederverwendung von Bauteilen, Kalkulation von Abrissmengen) KW - Gebäude KW - Bauaufnahme KW - Datenerfassung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3479 ER - TY - CHAP A1 - Laabs, Andreas A1 - Pahl, Peter Jan T1 - Das Beobachterkonzept zum Erhalt der Konsistenz in Datenmodellen N2 - Die Aufgaben des Bauingenieurwesens sind dadurch geprägt, daß sowohl die Planung als auch die Ausführung von Bauwerken häufigen Änderungen unterliegen. Beschreibt man das Verhalten der Bauwerke und den Bauprozeß im Computer mit Modellen, so ändern sich Umfang und Struktur der Modelle als Folge der Änderung in Planung und Ausführung. Diesen Vorgang nennt man Dynamisierung des Modells. Die Dynamisierung führt zu Veränderungen und Inkonsistenzen in den Modellen der Anwendungen. Die Aktualisierung und Abstimmung von Beziehungen innerhalb eines Modells sowie die Sicherung der Konsistenz der Modelle untereinander sind daher von zentraler Bedeutung für die Lösung von Bauingenieuraufgaben. Seit den letzten 10 Jahren wird die objektorientierte Methode in der Modellierung für Anwendungen im Bauingenieurwesen intensiv entwickelt und eingesetzt. Es hat sich gezeigt, daß die Anwendung dieser Methode in wichtigen Bereichen der Modellierung zu Verbesserungen führt. Gleichzeitig hat sich aber auch herausgestellt, daß die für das Bauingenieurwesen wichtigen Aspekte der Aktualisierung und der Konsistenz nicht zweckmäßig beschreibbar sind. In diesem Beitrag wird eine einfache Modelliermethode in ihrem Konzept und ihrer Realisierung gezeigt, mit der sich die Aktualisierung von Objekten und Modellen sowie die Sicherstellung der Konsistenz in Systemen des Bauingenieurwesens bearbeiten lassen. KW - Bauwerk KW - Objektmodell KW - Datenmodell KW - Bauausführung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4310 ER - TY - THES A1 - Bubner, André T1 - Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnhäusern in Stahlbauweise T1 - Data Models for Processing of Engineering Tasks at the Example of Residential Buildings in Steel Construction Method N2 - Modelle bilden die Grundlage der Planung. Sie repräsentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenhänge bezüglich der darin abgebildeten Aspekte. Diese Abhängigkeiten werden in der praktischen Planungsbearbeitung gegenwärtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen berücksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften führt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Ansprüchen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine über den Zweck der Bereitstellung ausgewählter Informationen zum Bauwerk und der Unterstützung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnhäusern in Stahlbauweise geführt. N2 - Models form the basis of the planning. They represent the characteristics necessary for the processing of a building in a form suited to the specific task. Between the different models, which are used for the representation of the building, there exist engineer-technical interrelations with regard to the illustrated aspects. At present these dependences are taken into consideration in the practical planning on basis of empirical values, normative guidelines and simplifying assumptions. The more detailed modelling of the building characteristics leads to a more defined linkage of the different models. To avoid an engineering island formation, there is an accordingly adapted representation of the relations existing between the single models necessary. With the rising demands on the processing of engineering tasks a data-technical representation wins in importance which realises more than a supply of selected information about the building and the support of a data exchange between different planners. This requires a discussion of the requirements for such a description from an engineer-technical view. The investigation of these technical requirements is carried out by the example of residential buildings in steel construction method. KW - Modellierung KW - Stahlbau KW - Wohnungsbau KW - Datenmodell KW - Modellbildung KW - Wohnhäuser in Stahlbauweise KW - fachliche Integration KW - Bearbeitung von Ingenieuraufgaben KW - modelling KW - residential buildings KW - engineer-technical integration KW - processing of engineering tasks Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070423-8580 ER - TY - CHAP A1 - Lähr, André A1 - Bletzinger, Kai-Uwe T1 - Design of an Analysis Environment for Planning Decision Support N2 - In this contribution, the design of an analysis environment is presented, that supports an analyst to come to a decision within a gradual collaborative planning process. An analyst represents a project manager, planner or any other person, involved in the planning process. Today, planning processes are managed by several geographically distributed planners and project managers. Thus, complexity of such a process rises even more. Prediction of consequences of many planning decisions is not possible, in particular since assessment of a planning advance is not trivial. There have to be considered several viewpoints, that depend on individual perceptions. In the following, methods are presented to realize planning decision support. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Schlussfolgern Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1370 ER - TY - CHAP A1 - Yahiaoui, Azzedine A1 - Hensen, Jan A1 - Soethout, Luc T1 - Developing CORBA-based distributed control and building performance environments by run-time coupling N2 - Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - CORBA Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1347 ER - TY - JOUR A1 - Fischer, A. A1 - Steinhage, V. T1 - Ein modellbasiertes Konzept zur städteplanerischen Kartierung durch digitale Bildanalyse N2 - There is an increasing need for 3D building extraction from aerial images for various applications such astown planning, environmental- and property-related studies. Aerial images usually reveal on one hand a certain amount of information not relevant for the given task of building extraction like vegetation, cars etc. On the other hand there is a loss of relevant information due to occlusions, low contrasts or disadvantageous perspectives. Therefore a promising concept for automated building reconstruction must incorporate a suffciantly complete model of the objects of interest. We propose a model-based approach to 3D building extraction from aerial images which reveals a tight coupling between a generic 3D object model and an explicit 2D image model. The generic object model employes domain specific volumetric primitives (i. e. building part models) and combination schemes. To cover the gap between 3D object models and 2D image data the image model is employed to predict the projective building appearences in aerial images. We present a strategy for a model-based building extraction based on the recognition-by-components principle and show first experimental results derived from international test sets KW - Stadtplanung KW - Kartierung KW - Bildanalyse KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4870 ER - TY - CHAP A1 - Kiesel, Gerd A1 - Engels, Merit A1 - Völker, Conrad ED - Kornadt, Oliver ED - Carrigan, Svenja ED - Hofmann, Markus ED - Völker, Conrad T1 - Energetische Transformation im ländlichen Raum – Aufbau eines prozessorientierten Entwicklungs- und Moderationsmodells T2 - Schriftenreihe des Fachgebiets Bauphysik/Energetische Gebäudeoptimierung N2 - Kleine Kommunen im ländlichen Raum sind aufgrund ihrer oft eingeschränkten personellen und finanziellen Kapazitäten bisher eher sporadisch in den Themenfeldern Energieeffizienz und Erneuerbare Energien aktiv. Immer wieder stellt sich daher Frage, wie die Klimaschutzstrategien des Bundes und der Länder dort mit dem verfügbaren Personal kostengünstig realisierbar sind. Vor diesem Hintergrund wird ein Werkzeug entwickelt, mit dessen Hilfe der aktive Einstieg in diese Thematik mit geringen Aufwand und überwiegend barrierefrei möglich ist. Der Aufbau eines prozessorientierten Entwicklungs- und Moderationsmodells zur Erprobung und Umsetzung bezahlbarer Handlungsoptionen für Energieeinsparungen und effizienten Energieeinsatz im überwiegend ländlichen geprägten Raum ist der Schwerpunkt der Softwarelösung. Kommunen werden mit deren Hilfe in die Lage versetzt, in die notwendigen Prozesse der Energie- und Wärmewende einzusteigen. Dabei soll der modulare Aufbau die regulären Schritte notwendiger (integrierter) Planungsprozesse nicht vollständig ersetzen. Vielmehr können innerhalb der Online-Anwendung - überwiegend automatisiert - konkrete Maßnahmenvorschläge erstellt werden, die ein solides Fundament der künftigen energetischen Entwicklung der Kommunen darstellen. Für eine gezielte Validierung der Ergebnisse und der Ableitung potentieller Maßnahmen werden für die Erprobung Modellkommunen in Thüringen, Bayern und Hessen als Reallabore einbezogen. Das Tool steht bisher zunächst nur den beteiligten Modellkommunen zur Verfügung. Die entwickelte Softwarelösung soll künftig Schritt für Schritt allen interessierten Kommunen mit diversen Hilfsmitteln und einer Vielzahl anderer praktischer Bestandteile zur Verfügung gestellt werden. KW - Modellierung KW - Kommune KW - Energiewende KW - Transformation KW - ländlicher Raum Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220617-46566 SN - 978-3-95974-176-7 SN - 2363-8206 PB - Eigenverlag Technische Universität Kaiserslautern CY - Kaiserslautern ER - TY - THES A1 - Göbel, Luise T1 - Experimental and semi-analytical multiscale approaches for the characterization of the elastic and viscoelastic behavior of polymer-modified cement-based materials T1 - Experimentelle und semi-analytische Multiskalenmethoden für die Charakterisierung des elastischen und viskoelastischen Verhaltens polymermodifizierter zementgebundener Materialien N2 - Polymer-modified cement concrete (PCC) is a heterogeneous building material with a hierarchically organized microstructure. Therefore, continuum micromechanics-based multiscale models represent a promising method to estimate the mechanical properties. By means of a bottom-up approach, homogenized properties at the macroscopic scale are derived considering microstructural characteristics. The extension of existing multiscale models for the application to PCC is the main objective of this work. For that, cross-scale experimental studies are required. Both macroscopic and microscopic mechanical tests are performed to characterize the elastic and viscoelastic properties of different PCC. The comparison between experiment and model prediction illustrates the success of the modeling approach. N2 - Polymermodifizierter Beton (PCC) ist ein heterogener Baustoff mit einer hierarchisch organisierten Mikrostruktur. Deshalb sind Multiskalenmodelle, die auf Prinzipien der Kontinuumsmikromechanik beruhen, sehr gut für die Abschätzung mechanischer Eigenschaften geeignet. Mit Hilfe eines Bottom-Up-Ansatzes werden unter Berücksichtigung mikrostruktureller Charakteristika homogenisierte Eigenschaften auf der makroskopischen Materialebene erhalten. Die Erweiterung bestehender Multiskalenmodelle für die Anwendung auf PCC ist das Hauptziel dieser Arbeit. Dafür werden skalenübergreifende Experimente herangezogen. Sowohl makroskopische als auch mikroskopische mechanische Tests werden durchgeführt, um das elastische und viskoelastische Verhalten verschiedener PCC zu charakterisieren. Ein Vergleich zwischen experimentellen Ergebnissen und der entsprechenden Modellvorhersage verdeutlicht den Erfolg des Modellierungsansatzes. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 19 KW - Elastizitätsmodul KW - Zementstein KW - Kunststoffadditiv KW - Modellierung KW - Mehrphasensystem KW - Multiskalenmodellierung KW - Multiscale modeling KW - Mikrostruktur KW - Polymermodifizierung KW - Kriechen KW - Elastizitätsmodul KW - Microstructure KW - Polymer modification KW - Creep KW - Young's modulus Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181211-38279 SN - 978-3-95773-269-9 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - JOUR A1 - Staub-French, Sheryl T1 - Feature-based Product Modeling for Building Construction N2 - Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2331 ER - TY - CHAP A1 - Berger, Hans A1 - Graeff-Weinberg, K. T1 - FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-Übergangselementen N2 - Detailuntersuchungen an Tragwerken führen bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. Während in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gewählt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des Übergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-Übergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits über nur eine Stufe erzielen läßt. Diese neu entwickelten sogenannten pNh-Elemente ermöglichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten für h-Verfeinerung). Das wird durch N stückweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht äquidistant sein braucht. Darüber hinaus ist es möglich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der Übergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung läßt sich dies besonders günstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit Übergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten Übergangselementkonzeptes umfassend demonstriert. KW - Tragwerk KW - Modellierung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4267 ER - TY - JOUR A1 - Wehner, R. A1 - Steinmann, Frank A1 - Hübler, Reinhard T1 - FLEXOB - Entwicklungstool für dynamische, modellbasierte CAD-Systeme N2 - Objektorientierte Modellierungstechniken werden gegenwärtig vor allem Entwicklern von CAD-Systemen angeboten. Sie erzeugen über die Schritte OO-Modellanalyse und OO-Softwaredesign OO-Programme, die mit ihrer Compilation das durch den Softwareingenieur gefundene Modell festschreiben. Generell, aber insbesondere im Bauwerksdesign, ist dieses Vorgehen unbefriedigend, da hier eine Normung von Modellen nicht gelingt, der Entwurfsprozeß vergleichsweise lang ist und eine Kooperation von Ingenieurgewerken mit verschiedenen Modelldomänen die Regel sind. Darüber hinaus weisen die Modelle in frühen Phasen ein hohes Maß an Unschärfe und Abstraktion auf. CAD-Tools, die diese Phasen unterstützen, benötigen deshalb: statt eines genormten Produktmodells ein einheitliches, kognitiv begründetes Modellstrukturierungsparadigma, für das mit der Objektorientierung eine mögliche Ausprägung gegeben ist, ein explizites, verfügbares Domänenmodell zur fortwährenden Interpretation von Bauwerksmodellen, deskriptive Elemente, die die Interpretation von Objekten und Attributen erleichtern, ein Konzept zur Behandlung von Unschärfe und Abstraktion. Hieraus ergeben sich für die Entwicklung von CAD-Systemen folgende Forderungen : Explizite Verfügbarkeit von Klassenobjekten und deren Erzeugung und Veränderung zur Laufzeit, Vererbung auf Klassen- und Instanzniveau, Erweiterte Attributkonzepte (Facetten), Unterstützung der Aggregation als einer wesentlichen Modellstrukturierungsrelation, Verfügbarkeit von OO-Schnittstellen zum Aufbau von CAD-Systemen aus Tools einerseits, sowie zur Trennung von Modellverwaltung und Modellrepräsentation andererseits. Als ein herausragendes Merkmal des Objektorientierten Paradigmas wird die Anwendungsnähe genannt, da Erscheinungen der behandelten Domäne sich analog in Modellen und Programmen wiederfinden (sollen). Unter der Grundannahme, daß dieses Paradigma auch durch den Anwender zur Erstellung seiner Modellwelten verwendet wird, will FLEXOB eine homogene Umgebung schaffen, die die Modellwelt des Softwareingenieurs zu Analysezwecken dem Anwender zur Verfügung stellt und die die Erweiterung dieser Modellwelt auf deskriptivem Niveau ermöglicht. Das Tool FLEXOB und einige wesentliche Implementationsdetails werden im Beitrag vorgestellt. Es handelt sich bei diesem Tools um eine C++ Klassenbibliothek, die entweder als Objektmodul oder als Windows-DLL verwendet werden kann. Aspekte des Nutzungsregimes solch flexibler Modellverwaltungen werden im Beitrag ebenfalls angespochen. KW - CAD KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4571 ER - TY - THES A1 - Häfner, Stefan T1 - Grid-based procedures for the mechanical analysis of heterogeneous solids N2 - The importance of modern simulation methods in the mechanical analysis of heterogeneous solids is presented in detail. Thereby the problem is noted that even for small bodies the required high-resolution analysis reaches the limits of today's computational power, in terms of memory demand as well as acceptable computational effort. A further problem is that frequently the accuracy of geometrical modelling of heterogeneous bodies is inadequate. The present work introduces a systematic combination and adaption of grid-based methods for achieving an essentially higher resolution in the numerical analysis of heterogeneous solids. Grid-based methods are as well primely suited for developing efficient and numerically stable algorithms for flexible geometrical modeling. A key aspect is the uniform data management for a grid, which can be utilized to reduce the effort and complexity of almost all concerned methods. A new finite element program, called Mulgrido, was just developed to realize this concept consistently and to test the proposed methods. Several disadvantages which generally result from grid discretizations are selectively corrected by modified methods. The present work is structured into a geometrical model, a mechanical model and a numerical model. The geometrical model includes digital image-based modeling and in particular several methods for the theory-based generation of inclusion-matrix models. Essential contributions refer to variable shape, size distribution, separation checks and placement procedures of inclusions. The mechanical model prepares the fundamentals of continuum mechanics, homogenization and damage modeling for the following numerical methods. The first topic of the numerical model introduces to a special version of B-spline finite elements. These finite elements are entirely variable in the order k of B-splines. For homogeneous bodies this means that the approximation quality can arbitrarily be scaled. In addition, the multiphase finite element concept in combination with transition zones along material interfaces yields a valuable solution for heterogeneous bodies. As the formulation is element-based, the storage of a global stiffness matrix is superseded such that the memory demand can essentially be reduced. This is possible in combination with iterative solver methods which represent the second topic of the numerical model. Here, the focus lies on multigrid methods where the number of required operations to solve a linear equation system only increases linearly with problem size. Moreover, for badly conditioned problems quite an essential improvement is achieved by preconditioning. The third part of the numerical model discusses certain aspects of damage simulation which are closely related to the proposed grid discretization. The strong efficiency of the linear analysis can be maintained for damage simulation. This is achieved by a damage-controlled sequentially linear iteration scheme. Finally a study on the effective material behavior of heterogeneous bodies is presented. Especially the influence of inclusion shapes is examined. By means of altogether more than one hundred thousand random geometrical arrangements, the effective material behavior is statistically analyzed and assessed. N2 - Die wichtige Bedeutung moderner Simulationsverfahren in der mechanischen Analyse heterogener Festkörper wird eingangs ausführlich dargestellt. Dabei wird als Problem festgestellt, dass die erforderliche hochauflösende Analyse bereits für relativ kleine Körper an die Grenzen heutiger Rechenleistung stößt, sowohl bezüglich Speicherbedarf als auch akzeptablen Rechenaufwands. Ein weiteres Problem stellt die häufig unzureichend genaue geometrische Modellierung der Zusammensetzung heterogener Körper dar. Die vorliegende Arbeit führt eine systematische Kombination und Anpassung von gitterbasierten Methoden ein, um dadurch eine wesentlich höhere Auflösung in der numerischen Analyse heterogener Körper zu erzielen. Gitterverfahren eignen sich ebenfalls ausgezeichnet, um effiziente und numerisch stabile Algorithmen zur flexiblen geometrischen Modellierung zu entwickeln. Ein Schlüsselaspekt stellt ein gleichmäßiges Datenmanagement für Gitter dar, welches dafür eingesetzt werden kann, um den Aufwand und die Komplexität von nahezu allen beteiligten Methoden zu reduzieren. Ein neues Finite-Elemente Programm, namens Mulgrido, wurde eigens dafür entwickelt, um das vorgeschlagene Konzept konsistent zu realisieren und zu untersuchen. Einige Nachteile, die sich klassischerweise aus Gitterdiskretisierungen ergeben, werden gezielt durch modifizierte Verfahren korrigiert. Die gegenwärtige Arbeit gliedert sich in ein geometrisches Modell, ein mechanisches Modell und ein numerisches Modell. Das geometrische Modell beinhaltet neben Methoden der digitalen Bildverarbeitung, insbesondere sämtliche Verfahren zur künstlichen Generierung von Einschluss-Matrix Geometrien. Wesentliche Beiträge werden bezüglich variabler Form, Größenverteilung, Überschneidungsabfragen und Platzierung von Einschlüssen geleistet. Das mechanische Modell bereitet durch Grundlagen der Kontinuumsmechanik, der Homogenisierung und der Schädigungsmodellierung auf eine numerische Umsetzung vor. Als erstes Thema des numerischen Modells wird eine besondere Umsetzung von B-Spline Finiten Elementen vorgestellt. Diese Finite Elemente können generisch für eine beliebige Ordnung k der B-Splines erzeugt werden. Für homogene Körper verfügen diese somit über beliebig skalierbare Approximationseigenschaften. Mittels des Konzepts mehrphasiger Finite Elemente in Kombination mit Übergangszonen entlang von Materialgrenzen gelingt eine hochwertige Erweiterung für heterogene Körper. Durch die Formulierung auf Elementebene, kann die Speicherung der globalen Steifigkeitsmatrix und somit wesentlicher Speicherplatz eingespart werden. Dies ist möglich in Kombination mit iterativen Lösungsverfahren, die das zweite Thema des numerischen Modells darstellen. Dabei liegt der Fokus auf Mehrgitterverfahren. Diese zeichnen sich dadurch aus, dass die Anzahl der erforderlichen Operationen um ein lineares Gleichungssystem zu lösen, nur linear mit der Problemgröße ansteigt. Durch Vorkonditionierung wird für schlecht konditionierte Probleme eine ganz wesentliche Verbesserung erreicht. Als drittes Thema des numerischen Modells werden Aspekte der Schädigungssimulation diskutiert, die in engem Zusammenhang mit der Gitterdiskretisierung stehen. Die hohe Effizienz der linearen Analyse kann durch ein schädigungskontrolliertes, schrittweise lineares Iterationsschema für die Schädigungsanalyse aufrecht erhalten werden. Abschließend wird eine Studie über das effektive Materialverhalten heterogener Körper vorgestellt. Insbesondere wird der Einfluss der Form von Einschlüssen untersucht. Mittels insgesamt weit über hunderttausend zufälliger geometrischer Anordnungen wird das effektive Materialverhalten statistisch analysiert und bewertet. T2 - Gitterbasierte Verfahren zur mechanischen Analyse heterogener Festkörper KW - B-Spline KW - Finite-Elemente-Methode KW - Mehrgitterverfahren KW - Homogenisieren KW - Schädigung KW - Festkörpermechanik KW - Numerische Mathematik KW - B-Spline Finite Elemente KW - Homogenisierung KW - mehrphasig KW - Lösungsverfahren KW - Modellierung KW - B-spline KW - finite element KW - multigrid KW - multiphase KW - effective properties Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070830-9185 ER - TY - CHAP A1 - Walukiewicz, Henryk T1 - Identification of Structural Models as a Problem of Group Representation Theory N2 - It has been shown that symmetries of moment functions of stochastic processes play an important role in identification of systems. They provide the group-theoretic method of choice of the model structure and model parameters. In the first stage the group-theoretic analysis of some fundamental concepts of stochastic dynamics: stochastic processes and functional series of Volterra-Wiener type has been undertaken. The analysis of group representations of the moment functions of order m for stochastic processes is the basic, original concept of the work. The following groups: symmetric Sm, special affine SAff(m), general linear GL(n, R), GL(n,C) and their subgroups play the main role in the models. In the second stage the informational entropy has been introduced as a measure of the randomness in the identified models. The group-theoretic approach underlines the unity of the nonlinear system identification and leads to useful engineering results in the range of the second-order (stochastic) theory. KW - Bauwerk KW - Modellierung KW - Gruppentheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3725 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Baumhauer, Andreas A1 - Ionita, Mihai T1 - Increasing the Reliability and Performance through Automatization and Parallel Working N2 - Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Parallelverarbeitung KW - Simulation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1397 ER - TY - CHAP A1 - Hauschild, Thomas A1 - Borrmann, André A1 - Hübler, Reinhard T1 - Integration of Constraints into Digital Building Models for Cooperative Planning Processes N2 - The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given. KW - Architektur KW - Verteiltes System KW - Constraint KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1775 ER - TY - CHAP A1 - Hartmann, Dietrich A1 - Meißner, Udo F. A1 - Rueppel, Uwe T1 - Integration of Productmodel Databases into Multi-Agent Systems N2 - This paper deals with two different agent-based approaches aimed at the incorporation of complex design information into multi-agent planning systems. The first system facilitates collaborative structural design processes, the second one supports fire engineering in buildings. Both approaches are part of two different research projects that belong to the DFG1 priority program 1103 entitled “Network-based Co-operative Planning Processes in Structural Engineering“ (DFG 2000). The two approaches provide similar database wrapper agents to integrate relevant design information into two multi-agent systems: Database wrapper agents make the relevant product model data usable for further agents in the multi-agent system, independent on their physical location. Thus, database wrapper agents act as an interface between multi-agent system and heterogeneous database systems. The communication between the database wrapper agents and other requesting agents presumes a common vocabulary: a specific database ontology that maps database related message contents into database objects. Hereby, the software-wrapping technology enables the various design experts to plug in existing database systems and data resources into a specific multi-agent system easily. As a consequence, dynamic changes in the design information of large collaborative engineering projects are adequately supported. The flexible architecture of the database wrapper agent concept is demonstrated by the integration of an XML and a relational database system. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1410 ER - TY - THES A1 - Willenbacher, Heiko T1 - Interaktive verknüpfungsbasierte Bauwerksmodellierung als Integrationsplattform für den Bauwerkslebenszyklus T1 - Interactive link-based building modelling as an integration platform for the building life cycle N2 - Den Gegenstand der Dissertation bilden die Konzeption und die exemplarische Realisierung eines verknüpfungsbasierten Bauwerksmodellierungsansatzes zur Schaffung einer integrierenden Arbeits- und Planungsumgebung für den Lebenszyklus von Bauwerken. Die Basis der Integration bildet ein deklarativ ausgerichteter Bauwerksmodellverbund bestehend aus abstrahierten, domänenspezifischen Partialmodellen. Auf Grund der de facto existierenden Dynamik im Bauwerkslebenszyklus werden sowohl der Bauwerksmodellverbund als auch die einzelnen Partialmodelle dynamisch modifizierbar konzipiert und auf Basis spezieller Modellverwaltungssysteme technisch realisiert. Die Verständigung innerhalb der vorgeschlagenen Gesamtbauwerksmodellarchitektur basiert auf anwenderspezifisch zu erstellenden Verknüpfungen zwischen den Partialmodellen und wird im Sinne einer hybriden Modellarchitektur durch eine zentrale, die Verknüpfungen verwaltende Komponente koordiniert. Zur Verwaltung und Abarbeitung der Verknüpfungen wird der Einsatz von Softwareagenten im Rahmen eines Multiagentensystems vorgeschlagen und diskutiert. N2 - The subject of this thesis is the conception and the exemplary realisation of a link-based building modelling approach for the creation of an integrating work and planning environment for the life cycle of buildings. The basis of the integration forms a declarative aligned building model compound consisting of abstract, domain-specific partial models. Due to the in fact existing dynamics in the building life cycle, both the building model compound and the individual partial models are dynamically modifiable. The communication within the suggested total building model architecture is based on specific links provided by users between the partial models. This link-based communication is co-ordinated in the sense of a hybrid model architecture by a central, the links administering component. For the administration and processing of the links, a multiagent-system is suggested. KW - Bauwerk KW - Modellierung KW - Produktlebenszyklus KW - Planungsprozess KW - Mehragentensystem KW - Partialmodelle KW - Integration KW - Bauwerkslebenszyklus KW - Dynamik KW - Verknüpfungen KW - building modelling KW - partial models KW - building life cycle KW - dynamics KW - links Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040216-328 ER - TY - JOUR A1 - Rudnicki, Andrzej T1 - Investigation by Computer Simulation - some aspect of transportation service reliability in urban public transport N2 - Essence of service unreliability on account of irregularity has been given. The reasons of occurance of overcrowded vehicles have been listed. The factor of service unreliability on account of irregularity has been determined. It is probability of the event, that the passenger finds departing vehicle fully filled, i.e. when all places seating and standing are occupied or condition of the travel, which would be not acceptable for passenger. Large dispersion of headways (i.e. irregularity) increases probability of such situations. To calculate the mentioned factor, the computer simulation was used. Both, passenger arrivals and vehicle operation have been modelled as stochastic interacted processes. Distributions of headways and passenger arrivals have been fixed by statistical methods. The >maximal capacity< of a vehicle has been determined. The set of parameters values for simulation runs has been given. The transformed results of computer simulation are series of nomographs for determination of a factor value. They were prepared for many types of trams and city buses, but only one nomograph has been presented. Difficulties in verification of model were discussed. Recommendations for rational utilisation level of public transport means capacity in the condition of randomness of passenger arrivals and disturbances in vehicle operation have been proposed. The other possibilities of service unreliability have been mentioned. General conclusions have been given KW - Öffentlicher Personennahverkehr KW - Zuverlässigkeit KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4829 ER - TY - JOUR A1 - Kreibich, H. A1 - Piroth, K. A1 - Seifert, I. A1 - Maiwald, Holger A1 - Kunert, U. A1 - Schwarz, Jochen A1 - Merz, B. A1 - Thieken, A. H. T1 - Is flow velocity a significant parameter in flood damage modelling? JF - Natural Hazards and Earth System Science N2 - Flow velocity is generally presumed to influence flood damage. However, this influence is hardly quantified and virtually no damage models take it into account. Therefore, the influences of flow velocity, water depth and combinations of these two impact parameters on various types of flood damage were investigated in five communities affected by the Elbe catchment flood in Germany in 2002. 2-D hydraulic models with high to medium spatial resolutions were used to calculate the impact parameters at the sites in which damage occurred. A significant influence of flow velocity on structural damage, particularly on roads, could be shown in contrast to a minor influence on monetary losses and business interruption. Forecasts of structural damage to road infrastructure should be based on flow velocity alone. The energy head is suggested as a suitable flood impact parameter for reliable forecasting of structural damage to residential buildings above a critical impact level of 2m of energy head or water depth. However, general consideration of flow velocity in flood damage modelling, particularly for estimating monetary loss, cannot be recommended. KW - Strömungsgeschwindigkeit KW - Überschwemmung KW - Schaden KW - Modellierung Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31455 UR - http://www.nat-hazards-earth-syst-sci.net/9/1679/2009/nhess-9-1679-2009.pdf SP - 1679 EP - 1692 ER - TY - CHAP A1 - Weitzmann, Rüdiger T1 - Limit state design of hybrid structures with meshless methods using mathematical optimization N2 - The revitalization of existing structures belongs to the frequently tasks in urban reconstruction processes. The adaptation for new requirements will commonly affect substantial changes in the general configuration of structures. The resulting revitalized structures are characterized by a hybrid design, where old and new, identical or diverse materials and members will be coupled in different ways. In the planning stage the treatment of these systems leads to application of complex and hybrid mechanical models respectively. High performance numerical instruments have to be applied for solving not only analysis but also targeted design problems. Because of the hybrid character of mechanical models in revitalization planning processes the use of hybrid technologies is advantageous. In this paper mixed domain technique will be used for connecting EFG and FE. The models derived will be adopted for design purposes of non-linear loaded hybrid structures. The investigations show a good adaptability of the meshless methods to the design of hybrid structures by using optimization strategies. With this method the advantages of both finite element and meshless methods can be utilized most suitable. With the property of a minimum amount of unknowns by maintaining an adequate quality of the results the application of mixed finite element and meshless methods is a promising alternative to traditional methods in structural analysis and optimization. KW - Gebäude KW - Rekonstruktion KW - Baustatik KW - Nichtlinearität KW - Optimierung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-67 ER - TY - CHAP A1 - Grigrieva, Polina A1 - Lymarenko, Yulia T1 - Mathematical modeling of nonlinear effects for vibrodiagnostics of fatigue cracks N2 - The vibration control of complicated mechanical structures is impossible without proper mathematical models that allow to have a true apprehension of events occurring in structural member before the starting of the experiment and correct the diagnostic experiment in case of need. An approach that implies using of a discrete model reflecting all required features of a prototype system and permitting of an effective analytical and numerical investigation is proposed in the work. At first a discrete model of a bladed disk with flaw is considered. Taking into account the symmetry of the structure by utilization of mathematical tools of group presentation theory the number of degrees of freedom of the system is diminished. Small damage of the disk is regarded as perturbation of structure symmetry. The distinction of vibration characteristics such as natural frequencies and mode shapes of damaged and undamaged systems is determined theoretically with the help of perturbation theory and can be used as an effective diagnostic criterion of a small-scale damage of the structure. In the second part of the work a non-linear two-mass model of an acoustic emission in a damaged structure is proposed. On basis of the numerical integration of the nonlinear differential equations and expansion of the derived solution into a Fourier series free and forced vibrations of the model are investigated. It is shown that proposed model reflects all characteristic properties of vibrations of damaged structures: reduction of natural frequency, sub- and super-resonances, acoustic effects. KW - Nichtlineare Mechanik KW - Schwingung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2917 ER - TY - JOUR A1 - Legatiuk, Dmitrii T1 - Mathematical Modelling by Help of Category Theory: Models and Relations between Them JF - mathematics N2 - The growing complexity of modern practical problems puts high demand on mathematical modelling. Given that various models can be used for modelling one physical phenomenon, the role of model comparison and model choice is becoming particularly important. Methods for model comparison and model choice typically used in practical applications nowadays are computationbased, and thus time consuming and computationally costly. Therefore, it is necessary to develop other approaches to working abstractly, i.e., without computations, with mathematical models. An abstract description of mathematical models can be achieved by the help of abstract mathematics, implying formalisation of models and relations between them. In this paper, a category theory-based approach to mathematical modelling is proposed. In this way, mathematical models are formalised in the language of categories, relations between the models are formally defined and several practically relevant properties are introduced on the level of categories. Finally, an illustrative example is presented, underlying how the category-theory based approach can be used in practice. Further, all constructions presented in this paper are also discussed from a modelling point of view by making explicit the link to concrete modelling scenarios. KW - Kategorientheorie KW - Modellierung KW - Modellierungsmethode KW - OA-Publikationsfonds2021 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210817-44844 UR - https://www.mdpi.com/2227-7390/9/16/1946?type=check_update&version=1 VL - 2021 IS - volume 9, issue 16, article 1946 PB - MDPI CY - Basel ER - TY - CHAP A1 - Popova, E. D. A1 - Datcheva, Maria A1 - Iankov, Roumen T1 - Mechanical Models with Interval Parameters N2 - In this paper we consider modelling of composite material with inclusions where the elastic material properties of both matrix and inclusions are uncertain and vary within prescribed bounds. Such mechanical systems, involving interval uncertainties and modelled by finite element method, can be described by parameter dependent systems of linear interval equations and process variables depending on the system solution. A newly developed hybrid interval approach for solving parametric interval linear systems is applied to the considered model and the results are compared to other interval methods. The hybrid approach provides very sharp bounds for the process variables - element strains and stresses. The sources for overestimation when dealing with interval computations are demonstrated. Based on the element strains and stresses, we introduce a definition for the values of nodal strains and stresses by using a set-theoretic approach. KW - Verbundwerkstoff KW - Modellierung KW - Finite-Elemente-Methode Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3482 ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Iris A1 - Gutzke, Thomas T1 - Mobile Computing in der Grundwasserbewirtschaftung N2 - Die Bewirtschaftung von Grundwasser umfasst zum einen die Nutzungserfordernisse und Versorgungsbedürfnisse und zum andern den Schutz des Grundwassers als Bestandteil des Naturhaushaltes. Die Verwendung von Informations- und Kommunikationsmethoden zur numerischen Grundwassermodellierung und zur Verwaltung von großflächigen qualitativen und quantitativen Grundwasserinformationen eröffnen die Möglichkeit einer nachhaltigen wasserwirtschaftlichen Planung sowie einer gezielten Steuerung der Auswirkungen von Grundwasserentnahmen und -versickerungen. Im Rahmen des Pilotprojektes Grundwasser-Online im Hessischen Ried (www.grundwasser-online.de) wurden gezielt die Arbeitsabläufe bei der Erfassung der Daten zur Grundwasserbewirtschaftung sowie der anschließenden Verarbeitung analysiert, bewertet und software-technisch umgesetzt. Ein wichtiger Aspekt dabei ist die Datenerfassung an den räumlich verteilten Grundwassermessstellen. Der vorliegende Beitrag zeigt auf, wie mobile EDV Geräte mit einer geeigneten Software die Arbeitsabläufe beim Einsatz vor Ort effizienter gestalten und die Einhaltung der Messvorgaben unterstützen können. Durch die Minimierung von Fehlerquellen kann dabei eine Qualitätsverbesserung des Datenbestandes erreicht werden. Es wird ein Konzept zur mobilen Erfassung von Grundwasserdaten unter Verwendung von GPS-Positionsdaten und Plausibilitätsprüfungen vorgestellt. Die Technologien und Herausforderungen bei der prototypischen Umsetzung werden aufgezeigt. KW - Grundwasser KW - Bewirtschaftung KW - Modellierung KW - Datenerfassung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3547 ER - TY - JOUR A1 - Piskunov, V. G. A1 - Marchuk, A. V. T1 - Model of stressed-strained State of Multilayer Masses with regard for Non-Ideal Contact of Layers N2 - Thus, mathematical model stressed- strained of a condition of layered masses is constructed. The model has high accuracy. It allows to simulate slippery contact of layers without friction. Thus not the order of permitting system of the equations is increased, and at its realization the method of fenite elements does not increase quantity of required degrees freedom. The differential operators included in system the equations are similar known in the classical theory of shells. It facilitates construction of a finite element. Presence in system of the differential equations of derivative of external forces allows to use her for the decision of contact problems with a stain of contact commensurable with thickness of a masses. KW - Geschichtetes Medium KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5427 ER - TY - CHAP A1 - Huhnt, Wolfgang T1 - Modellierung der Prozesse als Basis der Informationssysteme für Bauunternehmen N2 - Die fachlichen Grundlagen der Aufgaben, die in einem Bauunternehmen zu bearbeiten sind, wurden in verschiedenen Disziplinen entwickelt. Maßgeblich waren der Baubetrieb und die Betriebswirtschaftslehre. Die parallele Entwicklung hat jedoch dazu geführt, dass grundlegende Begriff und Verfahren zwischen den Disziplinen nicht aufeinander abgestimmt sind. Die verschiedenen Aufgaben beeinflussen jedoch einander. Innerhalb der jeweiligen Disziplin wurden Informationssysteme entwickelt, mit denen sich die Aufgaben aus der jeweiligen Disziplin bearbeiten lassen. Zur Verbindung der "verschiedenen Welten" existieren zwar ausgewählte Schnittstellen, eine durchgängige verteilte Bearbeitung der verschiedenen Aufgaben wird jedoch noch nicht umfassend unterstützt. Im vorliegenden Beitrag wird ein Vorgehen vorgestellt, auf dessen Grundlage eine verteilte Bearbeitung der fachgebietsübergreifenden Aufgaben erfolgen kann. Das Vorgehen beruht auf der Modellierung der Prozesse sowie der zur Bearbeitung der als Bestandteil der Prozesse spezifizierten Aufgaben benötigten Informationen. Dieses Modell wird auf der Grundlage der Mengenlehre mit einem entsprechenden Werkzeug aufgebaut. Die Spezifikation der Informationen wird genutzt, um Datenbankschemata zu generieren, die Spezifikation der Aufgaben wird genutzt, um Werkzeuge zur Bearbeitung zu identifizieren. Diese Werkzeuge sind in Java als Applets implementiert und können über entsprechende Treiber auf die Datenbanken zugreifen. Das Prozessmodell wird in einem nächsten Schritt erweitert. Personen werden eingeführt. Diesen Personen werden Aufgaben zugewiesen, deren Bearbeitung sie ausführen sollen. Auf der Grundlage des erweiterten Prozessmodells werden die Applets, die eine Person benötigt, auf einer entsprechenden Internet-Seite zusammengestellt. Damit kann projektspezifisch ein Informationssystem zusammengestellt werden, das eine verteilte Bearbeitung der verschiedenartigen Aufgaben unterstützt. KW - Baubetrieb KW - Informationsmanagement KW - Modellierung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5969 ER - TY - JOUR A1 - Dudek, Mariusz T1 - Modellierung der Verkehrsmittelwahl N2 - Die Zielstellung der Modal­Split­Betrachtungen läuft darauf hinaus, Entscheidungs-kriterien zu erarbeiten, nach denen die einzelnen Personen ihre Verkehrsmittel auswählen. In dieser Veröffentlichung wurden alle drei Gruppen der Modelle (klassische, verhaltensorientierte und der Analyse) der Verkehrsaufteilung kurz charakterisiert. Dann wurden vier ausgewählte Modelle genauer beschrieben. Zum Schluß wird das Modell der Verkehrsmittelwahl dargestellt , das für die Untersuchung der Verkehrsaufteilung in Krakau verwendet wurde . KW - Verkehrsmittelwahl KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4817 ER - TY - CHAP A1 - Lämmer, Lutz A1 - Meißner, Udo F. A1 - Ruben, Jochen T1 - Modellierung von Baugrund-Tragwerk-Systemen für die parallele numerische Simulation unter Berücksichtigung dynamischer Aspekte N2 - Bei der Gründung von schweren Bauwerken (z.B. Hochhäusern auf Gründungsplatten und pfählen) wird der Lastabtrag in den Baugrund durch eine starke Interaktion zwischen Bauwerk und Baugrund bestimmt. Der Baugrund kann phänomenologisch als Mehrphasenkontinuum beschrieben werden, bei dem die Phasen Feststoff, Flüssigkeit und Gas in mechanische Wechselwirkung treten. Die Wechselwirkung zwischen der Deformation des Feststoffes und der Strömung des Porenwassers spielt unter der Lasteinwirkung des Bauwerks und unter dynamischer Erregung eine zentrale Rolle. Bei komplexen Gründungsverhältnissen können die Deformations- und Spannungszustände realitätsnah nur durch dreidimensionale Modelle erfasst werden. Je nach Baufortschritt stellen sich die Probleme dabei unterschiedlich dar. Der vorliegende Beitrag beschäftigt sich mit der für die mit der Simulation mit der Methode der finiten Elemente notwendigen Modellierung und der rechnergestützten Netzgenerierung für die Baugrund-Tragwerk-Strukturen. Bei komplexen dreidimensionalen Gründungskonstruktionen ist eine solche rechnergestützte Diskretisierung mit finiten Elementen zweckmäßig, die das geotechnische System und dessen Randbedingungen und Lasten umfassend beschreiben und verwalten kann. Dafür werden geeignete Software-Werkzeuge vorgestellt, mit denen sich dreidimensionale, zeitabhängige Systeme modellieren und diskretisieren lassen. Die Kontaktproblematik zwischen Baugrund und Tragwerk und die Besonderheiten des Mehrphasenkontinuums stellen besondere Ansprüche an die Diskretisierung. Zudem werden Methoden vorgestellt, die das akkumulierte Gründungsmodell, das sich über den Bauablauf ergibt, verwalten und die verschiedenen Bauzustände in einem dynamischen Modell bereitstellen. KW - Boden-Bauwerk-Wechselwirkung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3276 ER - TY - THES A1 - Salavati, Mohammad T1 - Multi-Scale Modeling of Mechanical and Electrochemical Properties of 1D and 2D Nanomaterials, Application in Battery Energy Storage Systems N2 - Material properties play a critical role in durable products manufacturing. Estimation of the precise characteristics in different scales requires complex and expensive experimental measurements. Potentially, computational methods can provide a platform to determine the fundamental properties before the final experiment. Multi-scale computational modeling leads to the modeling of the various time, and length scales include nano, micro, meso, and macro scales. These scales can be modeled separately or in correlation with coarser scales. Depend on the interested scales modeling, the right selection of multi-scale methods leads to reliable results and affordable computational cost. The present dissertation deals with the problems in various length and time scales using computational methods include density functional theory (DFT), molecular mechanics (MM), molecular dynamics (MD), and finite element (FE) methods. Physical and chemical interactions in lower scales determine the coarser scale properties. Particles interaction modeling and exploring fundamental properties are significant challenges of computational science. Downscale modelings need more computational effort due to a large number of interacted atoms/particles. To deal with this problem and bring up a fine-scale (nano) as a coarse-scale (macro) problem, we extended an atomic-continuum framework. The discrete atomic models solve as a continuum problem using the computationally efficient FE method. MM or force field method based on a set of assumptions approximates a solution on the atomic scale. In this method, atoms and bonds model as a harmonic oscillator with a system of mass and springs. The negative gradient of the potential energy equal to the forces on each atom. In this way, each bond's total potential energy includes bonded, and non-bonded energies are simulated as equivalent structural strain energies. Finally, the chemical nature of the atomic bond is modeled as a piezoelectric beam element that solves by the FE method. Exploring novel materials with unique properties is a demand for various industrial applications. During the last decade, many two-dimensional (2D) materials have been synthesized and shown outstanding properties. Investigation of the probable defects during the formation/fabrication process and studying their strength under severe service life are the critical tasks to explore performance prospects. We studied various defects include nano crack, notch, and point vacancy (Stone-Wales defect) defects employing MD analysis. Classical MD has been used to simulate a considerable amount of molecules at micro-, and meso- scales. Pristine and defective nanosheet structures considered under the uniaxial tensile loading at various temperatures using open-source LAMMPS codes. The results were visualized with the open-source software of OVITO and VMD. Quantum based first principle calculations have been conducting at electronic scales and known as the most accurate Ab initio methods. However, they are computationally expensive to apply for large systems. We used density functional theory (DFT) to estimate the mechanical and electrochemical response of the 2D materials. Many-body Schrödinger's equation describes the motion and interactions of the solid-state particles. Solid describes as a system of positive nuclei and negative electrons, all electromagnetically interacting with each other, where the wave function theory describes the quantum state of the set of particles. However, dealing with the 3N coordinates of the electrons, nuclei, and N coordinates of the electrons spin components makes the governing equation unsolvable for just a few interacted atoms. Some assumptions and theories like Born Oppenheimer and Hartree-Fock mean-field and Hohenberg-Kohn theories are needed to treat with this equation. First, Born Oppenheimer approximation reduces it to the only electronic coordinates. Then Kohn and Sham, based on Hartree-Fock and Hohenberg-Kohn theories, assumed an equivalent fictitious non-interacting electrons system as an electron density functional such that their ground state energies are equal to a set of interacting electrons. Exchange-correlation energy functionals are responsible for satisfying the equivalency between both systems. The exact form of the exchange-correlation functional is not known. However, there are widely used methods to derive functionals like local density approximation (LDA), Generalized gradient approximation (GGA), and hybrid functionals (e.g., B3LYP). In our study, DFT performed using VASP codes within the GGA/PBE approximation, and visualization/post-processing of the results realized via open-source software of VESTA. The extensive DFT calculations are conducted 2D nanomaterials prospects as anode/cathode electrode materials for batteries. Metal-ion batteries' performance strongly depends on the design of novel electrode material. Two-dimensional (2D) materials have developed a remarkable interest in using as an electrode in battery cells due to their excellent properties. Desirable battery energy storage systems (BESS) must satisfy the high energy density, safe operation, and efficient production costs. Batteries have been using in electronic devices and provide a solution to the environmental issues and store the discontinuous energies generated from renewable wind or solar power plants. Therefore, exploring optimal electrode materials can improve storage capacity and charging/discharging rates, leading to the design of advanced batteries. Our results in multiple scales highlight not only the proposed and employed methods' efficiencies but also promising prospect of recently synthesized nanomaterials and their applications as an anode material. In this way, first, a novel approach developed for the modeling of the 1D nanotube as a continuum piezoelectric beam element. The results converged and matched closely with those from experiments and other more complex models. Then mechanical properties of nanosheets estimated and the failure mechanisms results provide a useful guide for further use in prospect applications. Our results indicated a comprehensive and useful vision concerning the mechanical properties of nanosheets with/without defects. Finally, mechanical and electrochemical properties of the several 2D nanomaterials are explored for the first time—their application performance as an anode material illustrates high potentials in manufacturing super-stretchable and ultrahigh-capacity battery energy storage systems (BESS). Our results exhibited better performance in comparison to the available commercial anode materials. KW - Batterie KW - Modellierung KW - Nanostrukturiertes Material KW - Mechanical properties KW - Multi-scale modeling KW - Energiespeichersystem KW - Elektrodenmaterial KW - Elektrode KW - Mechanische Eigenschaft KW - Elektrochemische Eigenschaft KW - Electrochemical properties KW - Battery development KW - Nanomaterial Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200623-41830 ER - TY - CHAP A1 - Eslimy-Isfahany, S. H. R. A1 - Pegels, Georg T1 - Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran N2 - The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Iran Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1421 ER - TY - CHAP A1 - Schley, Frank A1 - Mejstrik, Marcus A1 - Holz, K.-Peter T1 - Network Based Co-operation Platform for Geotechnical Engineering N2 - This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Geotechnik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1431 ER - TY - CHAP A1 - Meißner, Udo F. A1 - Rueppel, Uwe A1 - Theiss, Mirko T1 - Network-Based Fire Engineering Supported by Agents N2 - Building design in Civil Engineering is characterized by the cooperation of experts in multiple disciplines. Close cooperation of engineers in different fields is the basis of high product quality, short development periods and a minimum of investment costs. For each building the engineers have to create a new fire engineering model. The consistent realization of the fire engineering model in all details has high demands on communication, collaboration and building models. Thereby, to preserve the related design models consistent to each other and compatible with the rules of fire engineering is a complex task. In addition, regulations and guidelines vary according to the building location, so the knowledge base must be integrated dynamically into the planning process. This contribution covers the integration of engineers and design models into a cooperation network on the basis of mobile agents. The distributed models of architectural design, structural planning and fire engineering are supported. These models are implemented as XML-based models which can be accessed by mobile agents for information retrieval and for processing tasks. Agents are provided to all planners, they are enabled to check up the distributed design models with the knowledge base of the fire protection regulations,. With the use of such an agent each planner is supported to check up his planning for accordance with the fire protection requirements. The fire-engineering-agent analyzes the design and detects inconsistencies by processing fire protection requirements and design model facts in a rule-based expert system. The possibility to check the planning information at an early state in the sense of compatibility to the fire protection regulations enables a comprehensive diagnosis of the design and the reduction of planning errors. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Brandschutz KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1447 ER - TY - CHAP A1 - Weferling, Ulrich A1 - Donath, Dirk A1 - Petzold, Frank A1 - Thurow, Torsten T1 - Neue Techniken in der Bestandserfassung N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Als ein Teilaspekt wird in diesem Beitrag gezeigt, wie das Handaufmaß unter Einsatz modernen taktiler Erfassungsmethoden eine ganz neue Bedeutung für die Datenerfassung gewinnen kann. Das Potenzial der verschiedenen Verfahren zur Koordinatenbestimmung mit taktilen Werkzeugen wird evaluiert. Daraus wird eine Strategie entwickelt, die für die unterschiedlichen Notwendigkeiten im Planungsfortschritt den optimierten Einsatz der taktilen Erfassung in Kombination mit klassischen Erfassungsmethoden aufzeigt. Die Realisierbarkeit eines derartigen Konzeptes wird durch Fallstudien und mögliche Ablaufszenarien für einzelne Verfahren nachgewiesen. Durch die Integration taktiler Messverfahren in die Bestandserfassung kann erreicht werden, dass - relevante (Geometrie-) Informationen in ein umfassendes Bauwerksmodell integriert werden können, - die Bauaufnahme wieder im direkten Kontakt zum Bauaufnahmeobjekt erfolgen kann und - die Verfahren so einfach und leicht von allen Beteiligten eingesetzt werden können, um die Bauaufnahme und die Planung wieder miteinander zu verzahnen. KW - Gebäude KW - Datenerfassung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3734 ER - TY - CHAP A1 - Hahn, Stephan A1 - Weitzmann, Rüdiger T1 - Nichtlineare Analyse von hybriden Konstruktionen unter Verwendung von selektiv gekoppelten Tragwerks- und Querschnittsmodellen N2 - Bei der Untersuchung hybrider Strukturen kann eine Kopplung von Modellen unterschiedlicher Modellebenen vorteilhaft sein. Durch selektive Kopplung von Tragwerks- und Querschnittsmodellen in ausgewählten Bereichen der Konstruktion kann z.B. eine Verbesserung der Abbildungsgenauigkeit erzielt werden. Dadurch werden erweiterte Aussagen über das Querschnittstragverhalten in extrem beanspruchten Teilen des Tragwerks bei optionaler Skalierbarkeit des Modellumfangs möglich. Im Beitrag werden ausgewählte Varianten der Modellbildung gegenübergestellt und bewertet. Hierbei werden Aspekte der physikalischen Nichtlinearität von hybriden Konstruktionen insbesondere von Stahlbetonkonstruktionen berücksichtigt. Die Einbeziehung von Verfahren der mathematischen Optimierung in die Berechnungsstrategie ermöglicht die Lösung der zugrunde liegenden nichtlinearen Problemstellungen unter Vorgabe von Bemessungszielen und unter Beachtung von Grenzzustandsbedingungen. KW - Tragwerk KW - Stahlbeton KW - Modellierung KW - Bewertungssystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3026 ER - TY - CHAP A1 - van Rooyen, G.C. A1 - Olivier, A. H. T1 - Notes on structural analysis in a distributed collaboratory N2 - The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1451 ER -