TY - CHAP A1 - Zimprich, Inga T1 - Körperstreik T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - Feministische Gesundheitsrecherchegruppe KW - Femimismus KW - Gesundheit KW - Macht KW - feministische Gesundheitsrecherche Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42607 UR - https://nocturne-plattform.de/text/korperstreik SP - 91 EP - 102 PB - Nocturne CY - Berlin/Weimar ER - TY - JOUR A1 - Wolf, Mario A1 - Londong, Jörg T1 - Transformation der Siedlungswasserwirtschaft – Steuerungsmechanismen im Diskurs ressourcenorientierter Systemansätze am Beispiel von Thüringen T1 - Transformation of the wastewater sector – The ability of state level controlling mechanisms to enhance the implementation of resource-oriented sanitation systems JF - Raumforschung und Raumordnung N2 - Neuartige Sanitärsysteme zielen auf eine ressourcenorientierte Verwertung von Abwasser ab. Erreicht werden soll dies durch die separate Erfassung von Abwasserteilströmen. In den Fachöffentlichkeiten der Wasserwirtschaft und Raumplanung werden neuartige Sanitärsysteme als ein geeigneter Ansatz für die zukünftige Sicherung der Abwasserentsorgung in ländlichen Räumen betrachtet. Die Praxistauglichkeit dieser Systeme wurde zwar in Forschungsprojekten nachgewiesen, bisher erschweren jedoch für Abwasserentsorger vielfältige Risiken die Einführung einer ressourcenorientierten Abwasserbewirtschaftung. Ausgehend von einer Untersuchung der Kontexte bei der Umsetzung eines neuartigen Sanitärsystems im ländlichen Raum Thüringens wird in diesem Beitrag der Frage nachgegangen, wie auf Landesebene mit dem abwasserwirtschaftlichen Instrumentarium die Einführung von ressourcenorientierten Systemansätzen unterstützt werden kann. Zentrale Elemente des Beitrags sind die Darstellung der wesentlichen Transformationsrisiken in Bezug auf die Einführung innovativer Lösungsansätze, eine Erläuterung der spezifischen abwasserwirtschaftlichen Instrumente sowie die Darlegung von Steuerungsansätzen,mit denen die Einführung von neuartigen Sanitärsystemen gefördert werden kann. Im Ergebnis wird die Realisierbarkeit von neuartigen Sanitärsystemen durch den strategischen Einsatz des Instrumentariums deutlich, gleichwohl die Wasserwirtschaft durch die Erweiterung der bisherigen Systemgrenzen auf die Kooperation mit anderen Bereichen der Daseinsvorsorge angewiesen ist. N2 - New sanitary systems are an intelligent way to approach wastewater management in the face of demographic and climatic changes. It is also compatible with the emerging paradigm of a resource-oriented management of wastewater. While the general technical applicability of resource-oriented systems has been proven in various projects, the realisation is still on hold. The reasons can be found in several risks for wastewater disposal companies that are linked to the implementation process. Based on an analysis of the general context of an implementation of a new sanitary system in a typical rural area of Eastern Germany, this paper analyses to which extend the implementation of such innovative approaches can be facilitated by the regulation system and which steps need to be taken. According to this aim, risks that can hamper the transformation of the wastewater sector are identified, major administrative controlling mechanisms outlined and depicted in which strategic approach these could be used in order to foster the implementation of resource-oriented sanitary systems. As a result, the feasibility of the implementation of new alternative sanitary systems through the strategic application of the controlling mechanisms is generally proven. However, collaborations of the wastewater sectors with stakeholders of other sectors are required. KW - Raumordnung KW - Abwasserwirtschaft KW - Neuartige Sanitärsysteme KW - Instrument KW - Transformation KW - Siedlungswasserwirtschaft KW - Steuerungsansätze KW - Transformationsrisiken KW - Wastewater manegement KW - Transformation risks KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201022-42731 UR - https://content.sciendo.com/view/journals/rara/78/4/article-p397.xml VL - 2020 IS - Band 78, Heft 4 SP - 397 EP - 411 PB - Sciendo ER - TY - THES A1 - Winkel, Benjamin T1 - A three-dimensional model of skeletal muscle for physiological, pathological and experimental mechanical simulations T1 - Ein dreidimensionales Skelettmuskel-Modell für physiologische, pathologische und experimentelle mechanische Simulationen N2 - In recent decades, a multitude of concepts and models were developed to understand, assess and predict muscular mechanics in the context of physiological and pathological events. Most of these models are highly specialized and designed to selectively address fields in, e.g., medicine, sports science, forensics, product design or CGI; their data are often not transferable to other ranges of application. A single universal model, which covers the details of biochemical and neural processes, as well as the development of internal and external force and motion patterns and appearance could not be practical with regard to the diversity of the questions to be investigated and the task to find answers efficiently. With reasonable limitations though, a generalized approach is feasible. The objective of the work at hand was to develop a model for muscle simulation which covers the phenomenological aspects, and thus is universally applicable in domains where up until now specialized models were utilized. This includes investigations on active and passive motion, structural interaction of muscles within the body and with external elements, for example in crash scenarios, but also research topics like the verification of in vivo experiments and parameter identification. For this purpose, elements for the simulation of incompressible deformations were studied, adapted and implemented into the finite element code SLang. Various anisotropic, visco-elastic muscle models were developed or enhanced. The applicability was demonstrated on the base of several examples, and a general base for the implementation of further material models was developed and elaborated. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2020,3 KW - Biomechanik KW - Nichtlineare Finite-Elemente-Methode KW - Muskel KW - Brustkorb KW - Muscle model KW - FEM KW - Biomechanics KW - Incompressibility KW - Thorax Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201211-43002 ER - TY - THES A1 - Wild, Lena T1 - Patient ländlicher Raum. Planungen und Fördermaßnahmen zur Sicherstellung der medizinischen Versorgung in Thüringen N2 - Die Sicherstellung der medizinischen Versorgung in der Bundesrepublik wird seit einigen Jahren verstärkt diskutiert. Besonders in ländliche Regionen ist die Gewährleistung einer bedarfsgerechten medizinischen Versorgung problematisch. Längst ist dies zu einem gesamtgesellschaftlichen Thema geworden. Die Bachelorarbeit von Lena Wild untersucht die Schnittstelle von räumlicher Planung und medizinischer Planung mit der Frage „Inwiefern leisten die derzeitigen Planungen und Förderprogramme einen positiven Beitrag zur Sicherstellung der medizinischen Versorgung im ländlichen Raum Thüringens?“ Neben einer Literatur- und Datenanalyse stehen Expert:inneninterviews mit verschiedenen kommunalen und medizinischen Akteur:innen aus ausgewählten Landkreisen in Thüringen im Fokus der Arbeit. Nach einer Einordnung der medizinischen Versorgung in den Kontext der räumlichen Planung wird eine Übersicht über das Gesundheitssystem der Bundesrepublik und die Besonderheiten in Ostdeutschland gegeben. Darauffolgend werden Instrumente zur Steuerung der medizinischen Versorgung genauer untersucht. Besonders die kassenärztliche Bedarfsplanung als zentrales Steuerungsinstrument und die Fördermöglichkeiten in Thüringen und deren Wirkungsweisen stehen dabei im Fokus. Im Weiteren wird auf ländliche Räume und deren Herausforderungen für die Sicherstellung der medizinischen Versorgung und die Kommunikation und Zusammenarbeit der Akteur:innen eingegangen. Die Arbeit ist als Exkurs der Raumplanung in eine Fachplanung zu verstehen. Zwischen medizinischer Fachplanung und räumlicher Planung bestehen Wechselwirkungen. Das Kennen von Instrumenten und Wirkungsweisen der anderen Disziplin schafft dabei einen Mehrwert, um gemeinsame Ziele, wie die flächendeckende medizinische Versorgung und damit einhergehend eine nachhaltige räumliche Entwicklung, zu erreichen. T3 - IfEU.OPEN - 3 KW - Ländlicher Raum KW - Thüringen KW - Daseinsvorsorge KW - Hausarzt KW - Gleichwertigkeit der Lebensverhältnisse KW - Raumplanung KW - Raumordnung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210121-43400 ER - TY - BOOK A1 - Wellbrock, Christian-Mathias A1 - Buschow, Christopher T1 - Money for Nothing and Content for Free? N2 - Wie können journalistische Angebote nachhaltig finanziert werden? Dies bleibt die Kernfrage für Medienhäuser und journalistische Neugründungen bei der Entwicklung und beim Aufbau tragfähiger digitaler Geschäftsmodelle. Die Autoren des vorliegenden Bandes vermitteln einen breiten Überblick über den Wissensstand zum Thema Paid Content, Plattformen und Zahlungsbereitschaft im Journalismus und eröffnen innovative Blickwinkel auf neuartige Plattformmodelle ebenso wie auf Motive und Bedürfnisse der Nutzerinnen und Nutzer digitaljournalistischer Inhalte. Auf Grundlage empirischer Forschung werden Handlungsempfehlungen für die nutzerzentrierte Ausgestaltung von Paid-Content-Angeboten sowie neue Perspektiven auf Zahlungsbereitschaft im digitalen Journalismus erschlossen – relevant sowohl für die Wissenschaft wie auch für die Medienpraxis. KW - Digitaljournalismus KW - Geschäftsmodell KW - Zahlungsbereitschaft KW - Digitaler Journalismus KW - Paid Content KW - Plattformmodell KW - Zahlungsbereitschaft Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201001-42475 UR - https://www.nomos-elibrary.de/10.5771/9783748907251/money-for-nothing-and-content-for-free SN - 978-3-7489-0725-1 PB - Nomos CY - Baden-Baden ER - TY - JOUR A1 - Wellbrock, Christian-Mathias A1 - Arango Kure, Maria A1 - Buschow, Christopher T1 - Competition and Media Performance: A Cross-National Analysis of Corporate Goals of Media Companies in 12 Countries JF - International Journal of Communication N2 - Despite digitization and platformization, mass media and established media companies still play a crucial role in the provision of journalistic content in democratic societies. Competition is one key driver of (media) company behavior and is considered to have an impact on the media’s performance. However, theory and empirical research are ambiguous about the relationship. The objective of this article is to empirically analyze the effect of competition on media performance in a cross-national context. We assessed media performance of media companies as the importance of journalistic goals within their stated corporate goal system. We conducted a content analysis of letters to the shareholders in annual reports of more than 50 media companies from 2000 to 2014 to operationalize journalistic goal importance. When employing a fixed effects regression analysis, as well as a fuzzy set qualitative comparative analysis, results suggest that competition has a positive effect on the importance of journalistic goals, while the existence of a strong public service media sector appears to have the effect of “crowding out” commercial media companies. KW - Öffentlich-rechtlicher Rundfunk KW - Wettbewerb KW - Leistungsverhalten KW - media performance KW - competition KW - public service media KW - fuzzy set qualitative comparative analysis KW - fixed effects regression KW - Performance Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201221-43175 UR - https://ijoc.org/index.php/ijoc/article/view/13576 VL - 2020 IS - Vol 14 (2020) SP - 6154 EP - 6181 PB - USC, University of Southern California CY - Annenberg, California ER - TY - GEN A1 - Vollmer, Lisa A1 - Michel, Boris T1 - Wohnen in der Klimakrise. Die Wohnungsfrage als ökologische Frage: Aufruf zur Debatte T2 - s u b \ u r b a n. zeitschrift für kritische stadtforschung N2 - Die Verbindung der sozialen und der ökologischen Frage ist eine der zentralen Herausforderungen linker Politik und kritisch-engagierter Wissenschaft heute. Dafür, wie wenig das bisher gelingt, sind die öffentlichen und wissenschaftlichen Diskussionen um die Wohnungsfrage gute Beispiele. Dieser Aufruf ist eine Einladung an den kollektiven Wissensschatz aus Wissenschaft und Aktivismus, die unterschiedlichen Aspekte der ökologischen Wohnungsfrage, die bisher stark fragmentiert behandelt werden, in einzelnen Beiträgen weiter auszuführen und auf ihren strukturellen Zusammenhang mit der sozialen Wohnungsfrage hin zu beleuchten. KW - Wohnen KW - Wohnungspolitik KW - Wohnungsfrage KW - Klimapolitik KW - Soziale Sicherheit KW - Protestbewegung KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43327 UR - https://zeitschrift-suburban.de/sys/index.php/suburban/article/view/552 VL - 2020 IS - Band 8, Heft 1/2 SP - 163 EP - 166 PB - Sub\urban e.V. CY - Leipzig ER - TY - INPR A1 - Vogel, Albert A1 - Völker, Conrad A1 - Bode, Matthias A1 - Marx, Steffen T1 - Messung und Simulation der Erwärmung von ermüdungsbeanspruchten Betonprobekörpern T2 - Bauphysik N2 - Im vorliegenden Beitrag werden Messungen und Berechnungen vorgestellt, die die Temperaturentwicklung in Betonzylindern aufgrund zyklischer Beanspruchung genau beschreiben. Die Messungen wurden in einem Versuchsstand, die Berechnungen im FEM-Programm ANSYS durchgeführt. Mit Hilfe der Temperaturmessungen konnten die Simulationen für die Temperaturentwicklung der Betonzylinder mit der verwendeten Betonrezeptur validiert werden. Die Untersuchungen lassen den Schluss zu, dass bei zyklischer Probekörperbelastung und der einhergehenden Probekörperdehnung Energie dissipiert wird und diese maßgeblich für die Erwärmung der Probe verantwortlich ist. N2 - This paper presents measurements and simulations that describe the temperature development in concrete cylinders due to cyclic loading. The measurements were carried out in a test stand, the simulations in the FEM program ANSYS. The simulations of the temperature development in the concrete cylinders with the used concrete recipe were validated using the temperature measurements. The investigations lead to the conclusion that energy is dissipated during cyclic test specimen loading and the accompanying test specimen elongation and that this is mainly responsible for the heating of the specimen. KW - zyklische Beanspruchung KW - Ermüdung KW - Dissipation KW - zyklische Beanspruchung KW - Ermüdung KW - Dissipation KW - cyclic load KW - fatigue Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200425-41471 UR - https://onlinelibrary.wiley.com/doi/abs/10.1002/bapi.201900031 N1 - This is the pre-peer reviewed version of the following article: hhttps://onlinelibrary.wiley.com/doi/abs/10.1002/bapi.201900031, which has been published in final form at https://doi.org/10.1002/bapi.201900031. VL - 2020 IS - Volume 42, Issue 2 SP - 86 EP - 93 PB - John Wiley and Sons ER - TY - INPR A1 - Vogel, Albert A1 - Benz, Alexander A1 - Völker, Conrad T1 - Untersuchung des Wärmeübergangs von zyklisch beanspruchten Betonzylindern N2 - Wiederkehrende Belastungen, wie sie beispielsweise an Brücken oder Windenergieanlagen auftreten, können innerhalb der Nutzungsdauer solcher Bauwerke bis zu 1.000.000.000 Lastwechsel erreichen. Um das dadurch eintretende Ermüdungsverhalten von Beton zu untersuchen, werden diese zyklischen Beanspruchungen in mechanischen Versuchen mit Prüfzylindern nachgestellt. Damit Versuche mit solch hohen Lastwechselzahlen in akzeptablen Zeitdauern durchgeführt werden können, wird die Belastungsfrequenz erhöht. Als Folge dieser erhöhten Belas-tungsfrequenz erwärmen sich allerdings die Betonprobekörper, was zu einem früheren, unrealistischen Versagenszeitpunkt führen kann, weshalb die Erwärmung begrenzt werden muss. Um die Wärmefreisetzung in der Probe zu untersuchen, wurden Versuche und Simulationen durchgeführt. Im Beitrag wird die analytische und messtechnische Analyse des Wärmeübergangs an erwärmten Betonzylindern vorgestellt. Resultierend daraus wird eine Möglichkeit zur Reduktion der Erwärmung an zyklisch beanspruchten Betonzylindern vorgestellt. N2 - Periodic load cycles, such as those that occur on bridges or wind turbines, are of great importance for dynamic long-term considerations of concrete. Within the life span of such structures, up to 1,000,000,000 load changes can be expected. To determine the fatigue strength, the resistance to periodic loads can be determined in a short time in laboratory tests by increasing the load frequency. As a result of this increased load frequency, however, the concrete test specimens heat up, which can lead to an earlier, unrealistic time of failure, which is why the heating must be limited. Therefore, tests and simulations were carried out to investigate the heat release in the sample. In this article, the analytical analysis and measurements of the heat release of heated concrete cylinders are presented. As a conclusion, a possibility of reducing the temperature of dynamically stressed concrete cylinders is introduced. KW - Zyklische Beanspruchung KW - Wärmeübergang KW - Wärmeübergangskoeffizient KW - Dissipation KW - Wärmeübergangskoeffizient an Zylinder KW - heat transfer coefficient for cylinders KW - cyclic load Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200619-41813 N1 - This is the pre-peer reviewed version of the following article: https://onlinelibrary.wiley.com/doi/abs/10.1002/bapi.202000004, which has been published in final form at https://doi.org/10.1002/bapi.202000004 VL - 2020 IS - Volume 42, Issue 3 SP - 131 EP - 138 PB - John Wiley and Sons ER - TY - JOUR A1 - Tutal, Adrian A1 - Partschefeld, Stephan A1 - Schneider, Jens A1 - Osburg, Andrea T1 - Effects of Bio-Based Plasticizers, Made From Starch, on the Properties of Fresh and Hardened Metakaolin-Geopolymer Mortar: Basic Investigations JF - Clays and Clay Minerals N2 - Conventional superplasticizers based on polycarboxylate ether (PCE) show an intolerance to clay minerals due to intercalation of their polyethylene glycol (PEG) side chains into the interlayers of the clay mineral. An intolerance to very basic media is also known. This makes PCE an unsuitable choice as a superplasticizer for geopolymers. Bio-based superplasticizers derived from starch showed comparable effects to PCE in a cementitious system. The aim of the present study was to determine if starch superplasticizers (SSPs) could be a suitable additive for geopolymers by carrying out basic investigations with respect to slump, hardening, compressive and flexural strength, shrinkage, and porosity. Four SSPs were synthesized, differing in charge polarity and specific charge density. Two conventional PCE superplasticizers, differing in terms of molecular structure, were also included in this study. The results revealed that SSPs improved the slump of a metakaolin-based geopolymer (MK-geopolymer) mortar while the PCE investigated showed no improvement. The impact of superplasticizers on early hardening (up to 72 h) was negligible. Less linear shrinkage over the course of 56 days was seen for all samples in comparison with the reference. Compressive strengths of SSP specimens tested after 7 and 28 days of curing were comparable to the reference, while PCE led to a decline. The SSPs had a small impact on porosity with a shift to the formation of more gel pores while PCE caused an increase in porosity. Throughout this research, SSPs were identified as promising superplasticizers for MK-geopolymer mortar and concrete. KW - Geopolymere KW - Metakaolin KW - Superplasticizer Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210804-44737 UR - https://link.springer.com/article/10.1007%2Fs42860-020-00084-8 VL - 2020 IS - volume 68, No. 5 SP - 413 EP - 427 PB - Springer CY - Heidelberg ER - TY - THES A1 - Trümer, André T1 - Calcinierte Tone als Puzzolane der Zukunft - Von den Rohstoffen bis zur Wirkung im Beton N2 - Vor dem Hintergrund einer stetig wachsenden Nachfrage an Beton wie auch ambitionierter Reduktionsziele beim in der Zementproduktion anfallenden CO2 gelten calcinierte Tone als derzeit aussichtsreichste technische Neuerung im Bereich nachhaltiger Bindemittelkonzepte. Unter Ausnutzung ihrer Puzzolanität soll ein erheblicher Teil der Klinkerkomponente im Zement ersetzt werden, wobei der zu ihrer Aktivierung notwendige Energiebedarf vergleichsweise niedrig ist. Wesentliche Vorteile der Tone sind ihre weltweit nahezu unbegrenzte Verfügbarkeit sowie der äußerst geringe rohstoffbedingte CO2-Ausstoß während der Calcinierung. Schwierigkeiten auf dem Weg der Umsetzung bestehen allerdings in der Vielseitigkeit des Systems, welches durch eine hohe Varietät der Rohtone und des daraus folgenden thermischen Verhaltens gekennzeichnet ist. Entsprechend schwierig ist die Übertragbarkeit von Erfahrungen mit bereits etablierten calcinierten Tonen wie dem Metakaolin, der sich durch hohe Reinheit, einen aufwendigen Aufbereitungsprozess und eine entsprechend hohe Reaktivität auszeichnet. Ziel der Arbeit ist es daher, den bereits erlangten Kenntnisstand auf andere, wirtschaftlich relevante Tone zu erweitern und deren Eignung für die Anwendung im Beton herauszuarbeiten. In einem mehrstufigen Arbeitsprogramm wurde untersucht, inwieweit großtechnisch nutzbare Tone aktivierbar sind und welche Eigenschaften sich daraus für Zement und Beton ergeben. Die dabei festgestellte Reihenfolge Kaolinit > Montmorillonit > Illit beschreibt sowohl die Reaktivität der Brennprodukte als auch umgekehrt die Höhe der optimalen Calciniertemperatur. Auch wandelt sich der Charakter der entstandenen Metaphasen in dieser Abfolge von röntgenamorph und hochreaktiv zu glasig und reaktionsträge. Trotz dieser Einordnung konnte selbst mit dem Illit eine mit Steinkohlenflugasche vergleichbare Puzzolanität festgestellt werden. Dies bestätigte sich anschließend in Parameterversuchen, bei denen die Einflüsse von Rohstoffqualität, Calcinierung, Aufbereitung und Zement hinsichtlich der Reaktivitätsausbeute bewertet wurden. Die Bandbreite der erzielbaren Qualitäten ist dabei immens und gipfelt nicht zuletzt in stark unterschiedlichen Wirkungen auf die Festbetoneigenschaften. Hier machte sich vor allem die für Puzzolane typische Porenverfeinerung bemerkbar, sodass viele von Transportvorgängen abhängige Schadmechanismen unterdrückt wurden. Andere Schadex-positionen wie der Frostangriff ließen sich durch Zusatzmaßnahmen wie dem Eintrag von Luftporen beherrschen. Zu bemängeln sind vor allem die schlechte Verarbeitbarkeit kaolinitischer Metatone wie auch die für Puzzolane stark ausgeprägte Carbonatisierungsneigung. Wesentliches Ergebnis der Arbeit ist, dass auch Tone, die bisher als geringwertig bezüglich des Aktivierungspotentials galten, nutzbare puzzolanische Eigenschaften entwickeln können. So kann selbst ein stark verunreinigter Illit-Ton die Qualität von Flugasche erreichen. Mit stei-gendem Tonmineralgehalt sowie bei Präsens thermisch instabilerer Tonminerale wie Mont-morillonit und Kaolinit erweitert sich das Spektrum nutzbarer Puzzolanitäten bis hin zur hochreaktiven Metakaolin-Qualität. Damit lassen sich gute bis sehr gute Betoneigenschaften erzielen, sodass die Leistungsfähigkeit etablierter Kompositmaterialien erreicht wird. Somit sind die Voraussetzungen für eine umfangreiche Nutzung der erheblichen Tonmengen im Zement und Beton gegeben. Entsprechend können Tone einen effektiven Beitrag zu einer gesteigerten Nachhaltigkeit in der Baustoffproduktion weltweit leisten. KW - Beton KW - Ton Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200214-40968 SN - 978-3-00-065011-6 ER - TY - CHAP A1 - Thamer, Florian A1 - Turnheim, Tina T1 - INTRAAKTIVE THEATERLABORE – Theater der Sorge im Setting des ZRM3000 T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - das Theater der sorge ist konzipiert als 3-Phasen-modell: in der 1. Phase geht es um die hersTellung einer laborsituation, in der präfigurative lebens-, denk- und arbeitsformen in diskursiver und spielerischer weise präsentisch erprobt und in konstituierende Prozesse übertragen werden können; in der 2. Phase geht es um die gemeinschaftliche Konzeption, Vorbereitung und durchführung einer das labor abschließenden öffentlichen auFsTellung, die auf den kollektiven erfahrungen und ergebnissen der labore basiert. dadurch können gesellschaftliche resonanzen erzeugt und die konstituierenden Prozesse vorläufig instituiert werden. in der 3.Phase geht es dann darum, Vorbereitung: alle inhaltlichen erkenntnisse und ästhetischen Versuche in eine wiederholbare Theaterinszenierung / Performance zu überführen. die nötigen Voraussetzungen und bedingungen für diese von uns Vorstellungen genannten Formate sind für die hier verhandelte Fragestellung nicht von bedeutung – respektive würden sie den vorhandenen rahmen überschreiten – daher sparen wir diesen Komplex an dieser stelle aus. KW - Theater KW - Theatermaschine Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42610 UR - https://nocturne-plattform.de/text/intraaktive-theaterlabore SP - 233 EP - 269 PB - Nocturne CY - Berlin und Weimar ER - TY - THES A1 - Sung, Younkyoung T1 - Cultural Tourism and Social Resilience: Discourse of Historic Cities in East Germany, the Case of Gotha and Eisenach N2 - This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created. To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process. The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents’ lives? The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience. Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants. KW - Stadtmarketing KW - Stadtentwicklung KW - Cultural tourism KW - Resilience KW - City marketing KW - Heritage management KW - Urban identity Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200212-40920 ER - TY - JOUR A1 - Shamshirband, Shahaboddin A1 - Babanezhad, Meisam A1 - Mosavi, Amir A1 - Nabipour, Narjes A1 - Hajnal, Eva A1 - Nadai, Laszlo A1 - Chau, Kwok-Wing T1 - Prediction of flow characteristics in the bubble column reactor by the artificial pheromone-based communication of biological ants JF - Engineering Applications of Computational Fluid Mechanics N2 - A novel combination of the ant colony optimization algorithm (ACO)and computational fluid dynamics (CFD) data is proposed for modeling the multiphase chemical reactors. The proposed intelligent model presents a probabilistic computational strategy for predicting various levels of three-dimensional bubble column reactor (BCR) flow. The results prove an enhanced communication between ant colony prediction and CFD data in different sections of the BCR. KW - Maschinelles Lernen KW - Machine learning KW - Bubble column reactor KW - ant colony optimization algorithm (ACO) KW - flow pattern KW - computational fluid dynamics (CFD) KW - big data KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200227-41013 UR - https://www.tandfonline.com/doi/full/10.1080/19942060.2020.1715842 VL - 2020 IS - volume 14, issue 1 SP - 367 EP - 378 PB - Taylor & Francis ER - TY - JOUR A1 - Shabani, Sevda A1 - Samadianfard, Saeed A1 - Sattari, Mohammad Taghi A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin A1 - Kmet, Tibor A1 - Várkonyi-Kóczy, Annamária R. T1 - Modeling Pan Evaporation Using Gaussian Process Regression K-Nearest Neighbors Random Forest and Support Vector Machines; Comparative Analysis JF - Atmosphere N2 - Evaporation is a very important process; it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, evaporation is considered as a complex and nonlinear phenomenon to model. Thus, machine learning methods have gained popularity in this realm. In the present study, four machine learning methods of Gaussian Process Regression (GPR), K-Nearest Neighbors (KNN), Random Forest (RF) and Support Vector Regression (SVR) were used to predict the pan evaporation (PE). Meteorological data including PE, temperature (T), relative humidity (RH), wind speed (W), and sunny hours (S) collected from 2011 through 2017. The accuracy of the studied methods was determined using the statistical indices of Root Mean Squared Error (RMSE), correlation coefficient (R) and Mean Absolute Error (MAE). Furthermore, the Taylor charts utilized for evaluating the accuracy of the mentioned models. The results of this study showed that at Gonbad-e Kavus, Gorgan and Bandar Torkman stations, GPR with RMSE of 1.521 mm/day, 1.244 mm/day, and 1.254 mm/day, KNN with RMSE of 1.991 mm/day, 1.775 mm/day, and 1.577 mm/day, RF with RMSE of 1.614 mm/day, 1.337 mm/day, and 1.316 mm/day, and SVR with RMSE of 1.55 mm/day, 1.262 mm/day, and 1.275 mm/day had more appropriate performances in estimating PE values. It was found that GPR for Gonbad-e Kavus Station with input parameters of T, W and S and GPR for Gorgan and Bandar Torkmen stations with input parameters of T, RH, W and S had the most accurate predictions and were proposed for precise estimation of PE. The findings of the current study indicated that the PE values may be accurately estimated with few easily measured meteorological parameters. KW - Maschinelles Lernen KW - Machine learning KW - Deep learning Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200110-40561 UR - https://www.mdpi.com/2073-4433/11/1/66 VL - 2020 IS - Volume 11, Issue 1, 66 ER - TY - JOUR A1 - Seichter, Cosima Zita A1 - Neßler, Miriam A1 - Knopf, Paul T1 - Mapping In-Betweenness. The Refugee District in Belgrade in the Context of Migration, Urban Development, and Border Regimes JF - Movements. Journal for Critical Migration and Border Regime Studies N2 - The contribution explores the migratory situation on the Balkans and more specifically in the so-called Refugee District in Belgrade from a spatial perspective. By visualizing the areas of tensions in the Refugee District, the city of Belgrade, Serbia and Europe it aims to disentangle the political and socio-spatial levels that lead to the stuck situation of in-betweenness at the gates of the European Union. KW - Europäische Union KW - Balkan KW - Flüchtlingspolitik KW - Balkanroute Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210806-44807 UR - http://movements-journal.org/issues/08.balkanroute/11.seichter,nessler,knopf--mapping-in-betweenness.html VL - 2020 IS - Volume 5, Issue 1 SP - 1 EP - 9 CY - Göttingen ER - TY - JOUR A1 - Schönig, Barbara T1 - Ererbte Transformation. Kommentar zu Matthias Bernt und Andrej Holm „Die Ostdeutschlandforschung muss das Wohnen in den Blick nehmen“ BT - Kommentar zu Matthias Bernt und Andrej Holm „Die Ostdeutschlandforschung muss das Wohnen in den Blick nehmen“ JF - s u b \ u r b a n. zeitschrift für kritische stadtforschung N2 - Matthias Bernt und Andrej Holm weisen zu Recht darauf hin, dass es einer Forschung zu ostdeutschen Städten als konzeptionell eigenständigem Feld bedarf, die die spezifische Verräumlichung des tiefgreifenden gesellschaftlichen Transformationsprozesses nach 1990 ins Zentrum stellt. Dabei betrachten sie insbesondere das Feld des Wohnens als produktiv, um Kenntnis über die Struktur und Wirkung dieses Prozesses zu erlangen. Allerdings bleiben sie vage dabei, wie eine solche spezifisch auf Ostdeutschland gerichtete Wohnungsforschung zu konzipieren wäre und in welcher Weise die Besonderheiten und Parallelitäten ostdeutscher Entwicklungen zu den Transformationen von Wohnungs- und Stadtentwicklungspolitik in Westdeutschland, aber auch international, in Bezug zu setzen wären. KW - Deutschland <Östliche Länder> KW - Stadtplanung KW - Wohnungsbau KW - Ostdeutschland KW - Peripherisierungsforschung KW - Wohnen KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43296 UR - https://zeitschrift-suburban.de/sys/index.php/suburban/article/view/620/885 VL - 2020 IS - Band 8, Heft 3 SP - 115 EP - 122 PB - Sub\urban e.V. CY - Leipzig ER - TY - JOUR A1 - Schönig, Barbara T1 - Paradigm Shifts in Social Housing After Welfare‐State Transformation : Learning from the German Experience JF - International Journal of Urban and Regional Research N2 - Welfare‐state transformation and entrepreneurial urban politics in Western welfare states since the late 1970s have yielded converging trends in the transformation of the dominant Fordist paradigm of social housing in terms of its societal function and institutional and spatial form. In this article I draw from a comparative case study on two cities in Germany to show that the resulting new paradigm is simultaneously shaped by the idiosyncrasies of the country's national housing regime and local housing policies. While German governments have successively limited the societal function of social housing as a legitimate instrument only for addressing exceptional housing crises, local policies on providing and organizing social housing within this framework display significant variation. However, planning and design principles dominating the spatial forms of social housing have been congruent. They may be interpreted as both an expression of the marginalization of social housing within the restructured welfare housing regime and a tool of its implementation according to the logics of entrepreneurial urban politics. KW - Deutschland KW - Sozialer Wohnungsbau KW - Wohnungspolitik KW - Social Housing KW - Welfare State KW - Housing Policy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200709-41966 UR - https://onlinelibrary.wiley.com/doi/full/10.1111/1468-2427.12914 VL - 2020 PB - John Wiley & Sons ER - TY - CHAP A1 - Schnurbein, Stefanie von T1 - Mehr als Anerkennung. Das Schreiblabor als Resonanzraum und Assemblage T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - Ein "how to" von Schreibtechniken für Seminare und Kolloquien. KW - Künstlerische Forschung KW - Schreiben KW - Schreiblabor Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42656 UR - https://nocturne-plattform.de/text/mehr-als-anerkennung SP - 141 EP - 164 PB - Nocturne CY - Berlin/Weimar ER - TY - THES A1 - Schmitz, Tonia Annick T1 - Entwicklung und Bilanzierung eines Photobioreaktorsystems zur Makroalgenkultivierung am Standort einer landwirtschaftlichen Biogasanlage N2 - Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe für die Verwendung als Energieträger, Nahrungsmittel oder als Ausgangsstoff für Pharmazeutika. Dass die Quantität und Qualität der in natürlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und küstennahen Aquakulturen in Europa gegenwärtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabhängige Algenproduktion zu ermöglichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt. Im Ergebnis wird für den gegenwärtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz für die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz für die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erhöht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf jährlich 460.869€ für Ulva intestinalis, 4.010€ für Fucus vesiculosus und 16.913€ für Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gezüchteten Grünalge Ulva intestinalis anzustreben und die Produktivität der Zuchtanlage im Sinne des Optimalszenarios zu steigern. N2 - Marine macroalgae have renown properties as feedstock for fuel, food or pharmaceuticals. However, since the quantity and quality of naturally grown algae vary widely, their exploitability is reduced – especially for producers in high priced markets. Moreover, the expansion of marine or shore-based cultivation systems is unlikely in Europe, since promising sites either lie in fishing zones, recreational areas or natural reserves. The aim of this thesis was therefore to develop a closed photobioreactor system enabling full control of abiotic environmental parameters and an effective reconditioning of the cultivation medium in order to produce marine macroalgae at sites distant from shore. Using environmental management accounting methods, the potential output of macroalgae cultivation and valorization (product- or energy-based) is being assessed based on the specific growth rates and methane yields achievable with the species Ulva intestinalis, Fucus vesiculosus and Palmaria palmata. The balancing results for the status quo of the developed cultivation system show a positive outcome for a product-based valorization of the species Ulva intestinalis and a negative outcome for an energy-based valorization of all species investigated. Considering an optimum scenario providing an increase of growth rates and culture density, the balance of an energy-based valorization remains negative for all three species. However, the financial income by selling the cultivated macroalgae as a product sums up to a yearly amount of 460.869€ for Ulva intestinalis, 4.010€ for Fucus vesiculosus and 16.913€ for Palmaria palmata. Concluding, a product-based valorization seems promising – especially for the green algae Ulva intestinalis – when the productivity of the developed cultivation system is increased in accordance to the framework of the optimum scenario. KW - Makroalgen KW - Photobioreaktor KW - Biogas KW - Makroalgen KW - Photobioreaktorsystem KW - Biogasproduktion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200604-41774 ER - TY - JOUR A1 - Schirmer, Ulrike A1 - Osburg, Andrea T1 - A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study JF - SN Applied Sciences N2 - The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG–MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG–MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower. KW - Zement KW - Polymere KW - polymer adsorption KW - cement KW - visible spectrophotometry KW - depletion method KW - mass spectrometry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210804-44729 UR - https://link.springer.com/article/10.1007/s42452-020-03825-5 VL - 2020 IS - Volume 2, article 2061 SP - 1 EP - 11 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Saqlai, Syed Muhammad A1 - Ghani, Anwar A1 - Khan, Imran A1 - Ahmed Khan Ghayyur, Shahbaz A1 - Shamshirband, Shahaboddin A1 - Nabipour, Narjes A1 - Shokri, Manouchehr T1 - Image Analysis Using Human Body Geometry and Size Proportion Science for Action Classification JF - Applied Sciences N2 - Gestures are one of the basic modes of human communication and are usually used to represent different actions. Automatic recognition of these actions forms the basis for solving more complex problems like human behavior analysis, video surveillance, event detection, and sign language recognition, etc. Action recognition from images is a challenging task as the key information like temporal data, object trajectory, and optical flow are not available in still images. While measuring the size of different regions of the human body i.e., step size, arms span, length of the arm, forearm, and hand, etc., provides valuable clues for identification of the human actions. In this article, a framework for classification of the human actions is presented where humans are detected and localized through faster region-convolutional neural networks followed by morphological image processing techniques. Furthermore, geometric features from human blob are extracted and incorporated into the classification rules for the six human actions i.e., standing, walking, single-hand side wave, single-hand top wave, both hands side wave, and both hands top wave. The performance of the proposed technique has been evaluated using precision, recall, omission error, and commission error. The proposed technique has been comparatively analyzed in terms of overall accuracy with existing approaches showing that it performs well in contrast to its counterparts. KW - Bildanalyse KW - Mensch KW - Größenverhältnis KW - Geometrie KW - Körper KW - action recognition KW - rule based classification KW - human body proportions KW - human blob KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200904-42322 UR - https://www.mdpi.com/2076-3417/10/16/5453 VL - 2020 IS - volume 10, issue 16, article 5453 PB - MDPI CY - Basel ER - TY - THES A1 - Salavati, Mohammad T1 - Multi-Scale Modeling of Mechanical and Electrochemical Properties of 1D and 2D Nanomaterials, Application in Battery Energy Storage Systems N2 - Material properties play a critical role in durable products manufacturing. Estimation of the precise characteristics in different scales requires complex and expensive experimental measurements. Potentially, computational methods can provide a platform to determine the fundamental properties before the final experiment. Multi-scale computational modeling leads to the modeling of the various time, and length scales include nano, micro, meso, and macro scales. These scales can be modeled separately or in correlation with coarser scales. Depend on the interested scales modeling, the right selection of multi-scale methods leads to reliable results and affordable computational cost. The present dissertation deals with the problems in various length and time scales using computational methods include density functional theory (DFT), molecular mechanics (MM), molecular dynamics (MD), and finite element (FE) methods. Physical and chemical interactions in lower scales determine the coarser scale properties. Particles interaction modeling and exploring fundamental properties are significant challenges of computational science. Downscale modelings need more computational effort due to a large number of interacted atoms/particles. To deal with this problem and bring up a fine-scale (nano) as a coarse-scale (macro) problem, we extended an atomic-continuum framework. The discrete atomic models solve as a continuum problem using the computationally efficient FE method. MM or force field method based on a set of assumptions approximates a solution on the atomic scale. In this method, atoms and bonds model as a harmonic oscillator with a system of mass and springs. The negative gradient of the potential energy equal to the forces on each atom. In this way, each bond's total potential energy includes bonded, and non-bonded energies are simulated as equivalent structural strain energies. Finally, the chemical nature of the atomic bond is modeled as a piezoelectric beam element that solves by the FE method. Exploring novel materials with unique properties is a demand for various industrial applications. During the last decade, many two-dimensional (2D) materials have been synthesized and shown outstanding properties. Investigation of the probable defects during the formation/fabrication process and studying their strength under severe service life are the critical tasks to explore performance prospects. We studied various defects include nano crack, notch, and point vacancy (Stone-Wales defect) defects employing MD analysis. Classical MD has been used to simulate a considerable amount of molecules at micro-, and meso- scales. Pristine and defective nanosheet structures considered under the uniaxial tensile loading at various temperatures using open-source LAMMPS codes. The results were visualized with the open-source software of OVITO and VMD. Quantum based first principle calculations have been conducting at electronic scales and known as the most accurate Ab initio methods. However, they are computationally expensive to apply for large systems. We used density functional theory (DFT) to estimate the mechanical and electrochemical response of the 2D materials. Many-body Schrödinger's equation describes the motion and interactions of the solid-state particles. Solid describes as a system of positive nuclei and negative electrons, all electromagnetically interacting with each other, where the wave function theory describes the quantum state of the set of particles. However, dealing with the 3N coordinates of the electrons, nuclei, and N coordinates of the electrons spin components makes the governing equation unsolvable for just a few interacted atoms. Some assumptions and theories like Born Oppenheimer and Hartree-Fock mean-field and Hohenberg-Kohn theories are needed to treat with this equation. First, Born Oppenheimer approximation reduces it to the only electronic coordinates. Then Kohn and Sham, based on Hartree-Fock and Hohenberg-Kohn theories, assumed an equivalent fictitious non-interacting electrons system as an electron density functional such that their ground state energies are equal to a set of interacting electrons. Exchange-correlation energy functionals are responsible for satisfying the equivalency between both systems. The exact form of the exchange-correlation functional is not known. However, there are widely used methods to derive functionals like local density approximation (LDA), Generalized gradient approximation (GGA), and hybrid functionals (e.g., B3LYP). In our study, DFT performed using VASP codes within the GGA/PBE approximation, and visualization/post-processing of the results realized via open-source software of VESTA. The extensive DFT calculations are conducted 2D nanomaterials prospects as anode/cathode electrode materials for batteries. Metal-ion batteries' performance strongly depends on the design of novel electrode material. Two-dimensional (2D) materials have developed a remarkable interest in using as an electrode in battery cells due to their excellent properties. Desirable battery energy storage systems (BESS) must satisfy the high energy density, safe operation, and efficient production costs. Batteries have been using in electronic devices and provide a solution to the environmental issues and store the discontinuous energies generated from renewable wind or solar power plants. Therefore, exploring optimal electrode materials can improve storage capacity and charging/discharging rates, leading to the design of advanced batteries. Our results in multiple scales highlight not only the proposed and employed methods' efficiencies but also promising prospect of recently synthesized nanomaterials and their applications as an anode material. In this way, first, a novel approach developed for the modeling of the 1D nanotube as a continuum piezoelectric beam element. The results converged and matched closely with those from experiments and other more complex models. Then mechanical properties of nanosheets estimated and the failure mechanisms results provide a useful guide for further use in prospect applications. Our results indicated a comprehensive and useful vision concerning the mechanical properties of nanosheets with/without defects. Finally, mechanical and electrochemical properties of the several 2D nanomaterials are explored for the first time—their application performance as an anode material illustrates high potentials in manufacturing super-stretchable and ultrahigh-capacity battery energy storage systems (BESS). Our results exhibited better performance in comparison to the available commercial anode materials. KW - Batterie KW - Modellierung KW - Nanostrukturiertes Material KW - Mechanical properties KW - Multi-scale modeling KW - Energiespeichersystem KW - Elektrodenmaterial KW - Elektrode KW - Mechanische Eigenschaft KW - Elektrochemische Eigenschaft KW - Electrochemical properties KW - Battery development KW - Nanomaterial Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200623-41830 ER - TY - JOUR A1 - Sadeghzadeh, Milad A1 - Maddah, Heydar A1 - Ahmadi, Mohammad Hossein A1 - Khadang, Amirhosein A1 - Ghazvini, Mahyar A1 - Mosavi, Amir Hosein A1 - Nabipour, Narjes T1 - Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network JF - Nanomaterials N2 - In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO2-Al2O3/water nanofluid. TiO2-Al2O3/water in the role of an innovative type of nanofluid was synthesized by the sol–gel method. The results indicated that 1.5 vol.% of nanofluids enhanced the thermal conductivity by up to 25%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO2-Al2O3/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable. View Full-Text KW - Wärmeleitfähigkeit KW - Fluid KW - Neuronales Netz KW - Thermal conductivity KW - Nanofluid KW - Artificial neural network Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200421-41308 UR - https://www.mdpi.com/2079-4991/10/4/697 VL - 2020 IS - Volume 10, Issue 4, 697 PB - MDPI CY - Basel ER - TY - JOUR A1 - Saadatfar, Hamid A1 - Khosravi, Samiyeh A1 - Hassannataj Joloudari, Javad A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - A New K-Nearest Neighbors Classifier for Big Data Based on Efficient Data Pruning JF - Mathematics N2 - The K-nearest neighbors (KNN) machine learning algorithm is a well-known non-parametric classification method. However, like other traditional data mining methods, applying it on big data comes with computational challenges. Indeed, KNN determines the class of a new sample based on the class of its nearest neighbors; however, identifying the neighbors in a large amount of data imposes a large computational cost so that it is no longer applicable by a single computing machine. One of the proposed techniques to make classification methods applicable on large datasets is pruning. LC-KNN is an improved KNN method which first clusters the data into some smaller partitions using the K-means clustering method; and then applies the KNN for each new sample on the partition which its center is the nearest one. However, because the clusters have different shapes and densities, selection of the appropriate cluster is a challenge. In this paper, an approach has been proposed to improve the pruning phase of the LC-KNN method by taking into account these factors. The proposed approach helps to choose a more appropriate cluster of data for looking for the neighbors, thus, increasing the classification accuracy. The performance of the proposed approach is evaluated on different real datasets. The experimental results show the effectiveness of the proposed approach and its higher classification accuracy and lower time cost in comparison to other recent relevant methods. KW - Maschinelles Lernen KW - Machine learning KW - K-nearest neighbors KW - KNN KW - classifier KW - big data KW - clustering KW - cluster shape KW - cluster density KW - classification KW - reinforcement learning KW - data science KW - computation KW - artificial intelligence KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200225-40996 UR - https://www.mdpi.com/2227-7390/8/2/286 VL - 2020 IS - volume 8, issue 2, article 286 PB - MDPI ER - TY - THES A1 - Röder, Nina T1 - Formen des Lassens: Performative Strategien der Bildwerdung in der Inszenierten Fotografie N2 - Der Forschungsgegenstand dieser Arbeit basiert auf einer phänomenologischen Beobachtung internationaler fotografischer Positionen des Selbstportraits, welche seit den 1960er-Jahren verwandte Inhalte, gleichartige bildästhetische Merkmale und ähnliche Prozesse im fotografischen Herstellungsprozess aufweisen. Gemeinsam haben die in dieser Arbeit besprochenen Künstler*innen, dass sich ihre Bildwerdung am eigenen Körper vollzieht und an einen durch Bewegung gekennzeichneten Handlungsablauf geknüpft ist. Die jeweilige Bildsprache weist eine ephemere Ästhetik aus, in welcher inhaltlich sowohl der physische als auch der philosophisch gemeinte Begriff des (Los-)lassens eine Rolle spielt. Die künstlerischen Positionen, die Gegenstand dieser Ph.D.-Arbeit sind, umfassen Arbeiten von Bas Jan Ader (1942 – 1975), Francesca Woodman (1958 – 1981), Bernhard (1937 – 2011) und Anna Blume (*1937), Antoine d’Agata (*1961) und Tom Pope (*1986). KW - Fotografie KW - Performativität KW - Selbstbildnis KW - Lassen KW - Performative Fotografie KW - Fotografie als Handlung KW - Performative Strategien KW - Inszenierte Fotografie KW - Selbstportrait Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200817-42142 ER - TY - THES A1 - Rost, Grit T1 - Entwicklung eines Toolboxmodells als Planungswerkzeug für ein transdisziplinäres Wasserressourcenmanagement am Beispiel der Stadt Darkhan, Mongolei N2 - Im Rahmen der Dissertation wurde ein Toolboxmodell für transdisziplinäres Wasserressourcenmanagement entwickelt. Das Modell liefert den methodischen Rahmen Wasserressourcen nachhaltig und transdisziplinär zu bewirtschaften. Der Begriff der Nachhaltigkeit und eine Konkretisierung der nachhaltigen Bewirtschaftung globaler Wasserressourcen scheinen unüberschaubar und suggerieren die Forderung nach einer neuen Weltformel. Die globale Bedeutung der Wasserressourcen, die für Regionen spezifischen Besonderheiten des natürlichen Wasserhaushalts und der anthropogenen Nutzung, die Zeitskala und die Kontextualisierung in alle betroffenen und benachbarten Disziplinen deuten auf die Komplexität der Thematik hin. Es wird eine Systematisierung des Planungsprozesses von Wasserressourcen notwendig, anhand derer eine holistische Herangehensweise mit einer Strategieentwicklung für Regionen spezifischer Schwerpunktprobleme erfolgt. Ziel der Arbeit ist die Erarbeitung einer Strategie zur Systematisierung nach diesen Forderungen und die Bereitstellung eines Toolboxmodelles als Planungswerkzeug für das transdisziplinäre Wasserressourcenmanagement. Das Toolboxmodell stellt den konzeptionellen Rahmen für die Bewirtschaftung von Wasserressourcen mit der Anwendung transdisziplinärer Forschungsmethoden bereit. Wesentliche Herausforderung bei der Anwendung der transdisziplinären Methode sind die Implementierung verschiedener Skalenbereiche, der Umgang mit der Komplexität von Daten, das Bewahren von Transparenz und Objektivität sowie die Ermöglichung eines auf andere Regionen übertragbaren Planungsprozesses. Die theoretischen Grundlagen naturwissenschaftlicher Forschung zur Nachhaltigkeit haben ihren Ursprung in den biologischen und geographischen Disziplinen. Das Ineinandergreifen naturräumlicher Zusammenhänge und der Einfluss anthropogener Nutzung und technischer Innovationen auf den Naturhaushalt sind Kern der Kausalität übergreifenden Denkens und Verstehens. Mit dem Ansatz des integrierten Wasserressourcenmanagements (IWRM) erfolgt die Berücksichtigung wirtschaftlicher und sozioökonomischer Ziele in den Planungsprozess für ökologisch nachhaltige Wasserwirtschaft. Das Instrument der Wasserrahmenrichtlinie (EU-WRRL) ist auf eine Gewässerökologie ausgerichtete Richtlinie, welche die Integration verschiedener Interessenvertreter in den Planungsprozess vorsieht. Das Konzept der neuartigen Sanitärsysteme basiert auf Stoffflüssen zwischen konkurrierenden Handlungsbereichen, wie Abfall-, Ressourcen- und Landwirtschaft. Den integrierten Ansätzen fehlt eine übergeordnete gemeinsame Zielstrategie – eine sogenannte Phase Null. Diese Phase Null – das Lernen aller 7 Zusammenfassung 157 relevanten, konkurrierenden und harmonisierenden Handlungsfelder eines Planungshorizontes wird durch eine transdisziplinäre Perspektive ermöglicht. Während bei der integralen Perspektive eine disziplinorientierte Kooperation im Vordergrund steht, verlangt die transdisziplinäre Perspektive nach einer problemorientierten Kooperation zwischen den Interessenvertretern (Werlen 2015). Die bestehenden Konzepte und Richtlinien für das nachhaltige Management von Wasserressourcen sind etabliert und evaluiert. Der Literatur zur Folge ist eine Weiterentwicklung nach der Perspektive der Transdisziplinarität erforderlich. Das Toolboxmodell für integrales Wasserressourcenmanagement entspricht einem Planungstool bestehend aus Werkzeugen für die Anwendung wissenschaftlicher Methoden. Die Zusammenstellung der Methoden/Werkzeuge erfüllt im Rahmen die Methode transdisziplinärer Forschung. Das Werkzeug zum Aufstellen der relevanten Handlungsfelder umfasst die Charakterisierung eines Untersuchungsgebietes und Planungsrahmens, die kausale Verknüpfung des Bewirtschaftungskonzeptes und konkurrierender sowie sich unterstützender Stakeholder. Mit dem Werkzeug der Kontextualisierung und Indikatorenaufstellung wird eine Methode der stufenweisen und von einer Skala unabhängigen Bewertung des Umweltzustandes für die Zielpriorisierung vorgenommen. Damit wird das Toolboxmodell dem Problem der Komplexität und Datenverfügbarkeit gerecht. Anhand der eingesetzten ABC Methode, werden die Bewertungsgrößen differenziert strukturiert auf verschiedene Skalen und Datenressourcen (A=Ersterkennung,B=Zeigerwerte, C=Modell/Index). Die ABC-Methode ermöglicht die Planung bereits mit unsicherer und lückenhafter Datengrundlage, ist jederzeit erweiterbar und bietet somit eine operative Wissensgenerierung während des Gestaltungsprozesses. Für das Werkzeug zur Bewertung und Priorisierung wird der Algorithmus der Composite Programmierung angewandt. Diese Methode der Mehrfachzielplanung erfüllt den Anspruch der permanenten Erweiterbarkeit und der transparenten und objektiven Entscheidungsfindung. Die Komplexität des transdisziplinären Wasserressourcenmanagements kann durch die Methode der Composite Programmierung systematisiert werden. Das wesentliche Ergebnis der Arbeit stellt die erfolgreiche Erarbeitung und Anwendung des Tool-boxmodells für das transdisziplinäre Wasserressourcenmanagement im Untersuchungsgebiet Stadt Darkhan in der Mongolei dar. Auf Grund seiner besonderen hydrologischen und strukturellen Situa-tion wird die Relevanz eines nachhaltigen Bewirtschaftungskonzeptes deutlich. Im Rahmen des Querschnittsmoduls des MoMo-Projektes wurde eine für das Toolboxmodell geeignete Datengrundlage erarbeitet. Planungsrelevante Handlungsfelder wurden im Rahmen eines Workshops mit verschiedenen Interessenvertretern erarbeitet. Im Ergebnis dessen wurde die Systematik eines Zielbaumes mit Hauptzielen und untergeordneten Teilzielen als Grundlage der Priorisierung nach den holistischen Anspruch der transdisziplinären Forschung aufgestellt. Für die Messbarkeit, in-wieweit Teilziele erreicht sind oder Handlungsbedarf besteht, wurden Indikatoren erarbeitet. Die Indikatoren-Aufstellung erfolgte exemplarisch für das Handlungsfeld Siedlungswasserwirtschaft in allen Skalen des ABC-Systems. Die im BMBF-MoMo Projekt generierte umfassende Datengrundlage ermöglichte die Anwendung und Evaluierung des Toolboxmodells mit unterschiedlichem quantitativem und qualitativem Dateninput. Verschiedene Kombination von A (Ersterkennung), B (Zeigerwerte) und C (Modell/Index) als Grundlage der Priorisierung mit der Compostite Programmierung ermöglichten die Durchführung und Bewertung des transdisziplinären Planungstools. Die er-mittelten Rangfolgen von Teilzielen mit unterschiedlichen Bewertungsvarianten ergaben ähnliche Tendenzen. Das ist ein Hinweis dafür, dass für die zukünftige Anwendung des Toolboxmodells die operative Wissensgenerierung, d.h. das schrittweise Hinzufügen neu ermittelter, gesicherterer Daten, funktioniert. Eine schwierige Datenverfügbarkeit oder eine noch im Prozess befindliche wissenschaftliche Analyse sollen keine Hindernisse für eine schrittweise und erweiterbare Zielpriorisierung und Maßnahmenplanung sein. Trotz der Komplexität des transdisziplinären Ansatzes wird durch die Anwendung des Toolboxmodells eine effiziente und zielorientierte Handlungspriorisierung ermöglicht. Die Effizienz wird erreicht durch ressourcenschonende und flexible, Ziel fokussierte Datenermittlung. Zeit und Kosten im Planungsprozess können eingespart werden. Die erzielte Priorisierung von letztlich Handlungsempfehlungen erfolgt individuell auf die Eigenart des Untersuchungsgebietes angepasst, was hinsichtlich seiner Wirkung als erfolgsversprechend gilt. T3 - Schriften der Bauhaus-Universität Weimar - 39 KW - Wasserreserve KW - Transdisziplinarität KW - Flussgebiet KW - Mongolei KW - Wasserressourcenmanagement KW - Mangement Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201113-42874 SN - 978-3-941216-94-5 PB - Rhombus CY - Berlin ER - TY - CHAP A1 - Rinsdorf, Lars A1 - Buschow, Christopher ED - Wellbrock, Christian ED - Zabel, Christian T1 - Validität durch Agilität: Methodische Implikationen einerpraxistheoretisch fundierten Medieninnovationsforschung T2 - Innovation in der Medienproduktion und -distribution - Proceedings der Jahrestagung der Fachgruppe Medienökonomie der DGPUK 2019, Köln N2 - Das Innovationsmanagement von Medienorganisationen unterliegt derzeit erheblichen Veränderungen: Im veränderten Marktumfeld erweisen sich Flexibilität, schnelle Richtungswechsel und Anpassungsfähigkeit als zentral. Darauf muss auch die Medienmanagement-Forschung reagieren: Um die Agilität der gegenwärtigen Unternehmenspraxis valide zu erforschen, ist eine ebenso agile, adaptive Forschung gefordert. Zu diesem Zweck schlägt der Beitrag eine praxistheoretische Perspektive auf das Innovationsmanagement von Medienorganisationen vor. Empirische Forschungsdesigns, die aus einem solchen Zugriff resultieren, werden sowohl hinsichtlich ihrer methodischen Herausforderungen als auch ihres Forschungsprojektmanagements diskutiert. Der Beitrag greift außerdem neue Möglichkeitsräume des wissenschaftlichen Publizierens, des Universitätsmanagements sowie der Forschungsorganisation auf, die praxistheoretisch gegründete, empirische Innovationsforschung in der Medienwirtschaft einfordert. KW - Medienökonomie KW - Medientechnik KW - Innovationsforschung KW - Methodologie KW - Projektmanagement KW - Medienwirtschaft Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200630-41874 UR - https://www.ssoar.info/ssoar/handle/document/68090# PB - SSOAR - Social Science Open Access Repository CY - Stuttgart ER - TY - CHAP A1 - Reinartz, Juli T1 - Der perfekte Bankraub T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - Finanzielle Unabhängigkeit, überleben können, Superheld*in oder Pop-Star sein, Adrenalin-Kick, lebenslange Kompliz*innenschaft und ewige romanti- sche Verbundenheit, Verschwörung, siegreiches Über- listen, Täuschungstechniken – die Fantasien, die sich um die Idee des Bankraubs ranken, sind so verschieden wie die Menschen, die sie haben. Ein Banküberfall ist wahrscheinlich der Traum Vieler, angesichts der zuneh- menden Prekarisierung persönlicher Ökonomien und – gleichzeitig oder gerade deswegen – ein spektakulari- siertes, fast popkulturelles Ereignis, das in den Medien gut dokumentiert und in unzähligen Filmen illustriert und weitergesponnen wird. KW - Theater KW - Workshop KW - Planung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42591 UR - https://nocturne-plattform.de/text/der-perfekte-bankraub SP - 209 EP - 231 PB - Nocturne CY - B ER - TY - JOUR A1 - Reichert, Ina A1 - Olney, Peter A1 - Lahmer, Tom T1 - Combined approach for optimal sensor placement and experimental verification in the context of tower-like structures JF - Journal of Civil Structural Health Monitoring N2 - When it comes to monitoring of huge structures, main issues are limited time, high costs and how to deal with the big amount of data. In order to reduce and manage them, respectively, methods from the field of optimal design of experiments are useful and supportive. Having optimal experimental designs at hand before conducting any measurements is leading to a highly informative measurement concept, where the sensor positions are optimized according to minimal errors in the structures’ models. For the reduction of computational time a combined approach using Fisher Information Matrix and mean-squared error in a two-step procedure is proposed under the consideration of different error types. The error descriptions contain random/aleatoric and systematic/epistemic portions. Applying this combined approach on a finite element model using artificial acceleration time measurement data with artificially added errors leads to the optimized sensor positions. These findings are compared to results from laboratory experiments on the modeled structure, which is a tower-like structure represented by a hollow pipe as the cantilever beam. Conclusively, the combined approach is leading to a sound experimental design that leads to a good estimate of the structure’s behavior and model parameters without the need of preliminary measurements for model updating. KW - Strukturmechanik KW - Finite-Elemente-Methode KW - tower-like structures KW - experimental validation KW - mean-squared error KW - fisher-information matrix Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210804-44701 UR - https://link.springer.com/article/10.1007/s13349-020-00448-7 VL - 2021 IS - volume 11 SP - 223 EP - 234 PB - Heidelberg CY - Springer ER - TY - THES A1 - Reformat, Martin T1 - Zementmahlung - Untersuchungen zum Zusammenhang von Mahlaggregat und Materialeigenschaften N2 - Die Mahlung als Zerkleinerungsprozess stellt seit den Anfängen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, über das Aufschließen von Heilkräutern in Mörsern bis hin zur Herstellung von Tonern für Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein ökologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden für Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben rückt. Die Komplexität der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit“ ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ansätzen gefertigt. Darüber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsfähige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erfüllt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei übergeordnete Teile: Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und Hüttensand angestellt. Um eine möglichst effektive Mahlung von Zement und Kompositmaterialien zu gewährleisten, ist es wichtig, die Auswirkung von Mühlenparametern zu kennen. Hierfür wurde eine umfangreiche Versuchsmatrix aufgestellt und abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlkörpermühlen und mahlkörperlosen Mühlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengefüge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker führten ungünstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementprüfungen. Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und Rührwerkskugelmühle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker und konventionellen Kompositmaterialien wie Hüttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zusätzliche Reaktivität bei gleicher Granulometrie gegenüber der herkömmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem Hüttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberflächenvergrößerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erhöhung der Reaktivität zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberflächendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivitätsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgeführt. Im Speziellen wurde untersucht, inwieweit eine Rückführung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf möglich ist. Die hierfür verwendete Mahltechnik umfasst sowohl konventionelle Mühlen als auch Hochenergiemühlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualität wurde der sogenannte „Aktivierungskoeffizient“ eingeführt. Es stellte sich heraus, dass die Rückführung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abhängt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegenüber dem mit Gesteinskörnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationswärmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen Mühlen aufbereitet. Die hier erzielten Ergebnisse können teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend. N2 - Grinding as a comminution process has been one of the most important forms of processing of all kinds of materials since the beginning of mankind - from grain grinding over digesting medicinal herbs in mortars to producing toners for printers and copiers. Cement grinding in particular is both an economic and an ecological factor in modern societies. More than two-thirds of the electrical energy of cement production is consumed for raw meal and clinker or composite material grinding. This is just one reason why the milling process is increasingly becoming the focus of many research and development projects. And the complexity of cement grinding is increasing. The simple demand to grind to a certain cement fineness is obsolete. Cements are custom-made with a variety of combination products, comminuted separately or together in different grinding units or made with completely new approaches. In addition, the sector of building materials recycling - with all the associated challenges - also wins more and more importance. In terms of the question of how the grinding process could produce high-performance products on the one hand and the increasing demands on sustainability on the other hand, the grinding devices are the focus of the considerations. Accordingly, in addition to an in-depth literature review on the state of knowledge, the present work is divided into two major parts: In the first part investigations are made on conventional grinding devices with core products used in the cement industry, such as Portland cement clinker, limestone, fly ash and granulated blast furnace slag. To ensure the most effective grinding of cement and composite materials, it is important to know the effect of grinding parameters. For this, an extensive experimental matrix was set up and processed. The spectrum of analysis methods was also extensive and was applied to both the milled materials and the cements and concretes made from them. It could be shown that especially the distinction between grinding media mills and non-grinding media mills has a decisive influence on the granulometry and thus also on the cement performance. The processing properties, especially the water demand and thus the pore structure and finally compressive strength and durability properties of the concretes made from these cements, have been strong influenced, particularly. In studies on the common grinding of limestone and clinker an unfavorable enrichment of easily grindable limestone and clayey secondary constituents led to a poorer performance in all cement tests. The second part is devoted to high-energy milling. The technology behind it has been used for decades in other sectors of the economy, such as pharmacy, biology and the food industry and has also been used in cement research for some time. As representatives, the planetary and stirred media ball mill may be mentioned here. In addition to basic investigations on cement clinker and conventional composite materials such as blast furnace slag and limestone, the main Portland cement clinker phase alite was also investigated. The high-energy milling of conventional composite materials generated additional reactivity with the same granulometry compared to conventional grinding. This was observed especially on per se reactive Portland cement clinker as well as on latent-hydraulic blast furnace slag. Ground fly ash could be activated only to a small extent. The general influence of surface enlargement, structural defects and relaxation effects of a ground product were thoroughly investigated and weighted as well. The high-energy milling results of alite showed that the structural defects introduced by milling result in an increased reactivity. It was found that mainly surface defects, structural (volume) defects and as counterpart self-healing effects are the factors determining reactivity. Furthermore, attempts were made to grind concrete waste sand (CDW). In particular, it was examined to what extent a return of CDW, as an unvaluable part of the concrete fracture, in the form of a cement composite material in the building material cycle is possible. The grinding technique used for this purpose includes both conventional mills and high-energy mills. Composite cements with a varied proportion of recycled material were produced and examined for their fundamental properties. For the evaluation of the product quality the so-called äctivation coefficient"was introduced. It was found that the return of used concrete crushed sand as a potential composite significantly depends on the content of the cement paste. For example, pure cement paste as a milled composite showed better performance than the aggregated contaminated CDW. Based on the measured heat of hydration and compressive strengths, the activation coefficient decreased with decreasing degree of abstraction and the activation coefficient also decreased with increasing degree of substitution. For comparison, the same materials were prepared in conventional mills. The results obtained here can be partly considered as equivalent to high-energy milling. Consequently, when activating recycled materials, the grinding technique is less important than the amount of activatable cement paste. KW - Zement KW - Beton KW - Mahlung KW - Zementmahlung KW - Mahlaggregat KW - Vertical roller mill Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201102-42794 SN - 978-3-00-067121-0 ER - TY - THES A1 - Radmard Rahmani, Hamid T1 - Artificial Intelligence Approach for Seismic Control of Structures N2 - Abstract In the first part of this research, the utilization of tuned mass dampers in the vibration control of tall buildings during earthquake excitations is studied. The main issues such as optimizing the parameters of the dampers and studying the effects of frequency content of the target earthquakes are addressed. Abstract The non-dominated sorting genetic algorithm method is improved by upgrading generic operators, and is utilized to develop a framework for determining the optimum placement and parameters of dampers in tall buildings. A case study is presented in which the optimal placement and properties of dampers are determined for a model of a tall building under different earthquake excitations through computer simulations. Abstract In the second part, a novel framework for the brain learning-based intelligent seismic control of smart structures is developed. In this approach, a deep neural network learns how to improve structural responses during earthquake excitations using feedback control. Abstract Reinforcement learning method is improved and utilized to develop a framework for training the deep neural network as an intelligent controller. The efficiency of the developed framework is examined through two case studies including a single-degree-of-freedom system and a high-rise building under different earthquake excitation records. Abstract The results show that the controller gradually develops an optimum control policy to reduce the vibrations of a structure under an earthquake excitation through a cyclical process of actions and observations. Abstract It is shown that the controller efficiently improves the structural responses under new earthquake excitations for which it was not trained. Moreover, it is shown that the controller has a stable performance under uncertainties. KW - Erdbeben KW - seismic control KW - tuned mass damper KW - reinforcement learning KW - earthquake KW - machine learning KW - Operante Konditionierung KW - structural control Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200417-41359 ER - TY - THES A1 - Rabizadeh, Ehsan T1 - Goal-oriented A Posteriori Error Estimation and Adaptive Mesh Refinement in 2D/3D Thermoelasticity Problems T1 - Zielorientierte a posteriori Fehlerabschätzung und adaptive Netzverfeinerung bei 2D- und 3Dthermoelastischen Problemen N2 - In recent years, substantial attention has been devoted to thermoelastic multifield problems and their numerical analysis. Thermoelasticity is one of the important categories of multifield problems which deals with the effect of mechanical and thermal disturbances on an elastic body. In other words, thermoelasticity encompasses the phenomena that describe the elastic and thermal behavior of solids and their interactions under thermo-mechanical loadings. Since providing an analytical solution for general coupled thermoelasticity problems is mathematically complicated, the development of alternative numerical solution techniques seems essential. Due to the nature of numerical analysis methods, presence of error in results is inevitable, therefore in any numerical simulation, the main concern is the accuracy of the approximation. There are different error estimation (EE) methods to assess the overall quality of numerical approximation. In many real-life numerical simulations, not only the overall error, but also the local error or error in a particular quantity of interest is of main interest. The error estimation techniques which are developed to evaluate the error in the quantity of interest are known as “goal-oriented” error estimation (GOEE) methods. This project, for the first time, investigates the classical a posteriori error estimation and goal-oriented a posteriori error estimation in 2D/3D thermoelasticity problems. Generally, the a posteriori error estimation techniques can be categorized into two major branches of recovery-based and residual-based error estimators. In this research, application of both recovery- and residual-based error estimators in thermoelasticity are studied. Moreover, in order to reduce the error in the quantity of interest efficiently and optimally in 2D and 3D thermoelastic problems, goal-oriented adaptive mesh refinement is performed. As the first application category, the error estimation in classical Thermoelasticity (CTE) is investigated. In the first step, a rh-adaptive thermo-mechanical formulation based on goal-oriented error estimation is proposed.The developed goal-oriented error estimation relies on different stress recovery techniques, i.e., the superconvergent patch recovery (SPR), L2-projection patch recovery (L2-PR), and weighted superconvergent patch recovery (WSPR). Moreover, a new adaptive refinement strategy (ARS) is presented that minimizes the error in a quantity of interest and refines the discretization such that the error is equally distributed in the refined mesh. The method is validated by numerous numerical examples where an analytical solution or reference solution is available. After investigating error estimation in classical thermoelasticity and evaluating the quality of presented error estimators, we extended the application of the developed goal-oriented error estimation and the associated adaptive refinement technique to the classical fully coupled dynamic thermoelasticity. In this part, we present an adaptive method for coupled dynamic thermoelasticity problems based on goal-oriented error estimation. We use dimensionless variables in the finite element formulation and for the time integration we employ the acceleration-based Newmark-_ method. In this part, the SPR, L2-PR, and WSPR recovery methods are exploited to estimate the error in the quantity of interest (QoI). By using adaptive refinement in space, the error in the quantity of interest is minimized. Therefore, the discretization is refined such that the error is equally distributed in the refined mesh. We demonstrate the efficiency of this method by numerous numerical examples. After studying the recovery-based error estimators, we investigated the residual-based error estimation in thermoelasticity. In the last part of this research, we present a 3D adaptive method for thermoelastic problems based on goal-oriented error estimation where the error is measured with respect to a pointwise quantity of interest. We developed a method for a posteriori error estimation and mesh adaptation based on dual weighted residual (DWR) method relying on the duality principles and consisting of an adjoint problem solution. Here, we consider the application of the derived estimator and mesh refinement to two-/three-dimensional (2D/3D) thermo-mechanical multifield problems. In this study, the goal is considered to be given by singular pointwise functions, such as the point value or point value derivative at a specific point of interest (PoI). An adaptive algorithm has been adopted to refine the mesh to minimize the goal in the quantity of interest. The mesh adaptivity procedure based on the DWR method is performed by adaptive local h-refinement/coarsening with allowed hanging nodes. According to the proposed DWR method, the error contribution of each element is evaluated. In the refinement process, the contribution of each element to the goal error is considered as the mesh refinement criterion. In this study, we substantiate the accuracy and performance of this method by several numerical examples with available analytical solutions. Here, 2D and 3D problems under thermo-mechanical loadings are considered as benchmark problems. To show how accurately the derived estimator captures the exact error in the evaluation of the pointwise quantity of interest, in all examples, considering the analytical solutions, the goal error effectivity index as a standard measure of the quality of an estimator is calculated. Moreover, in order to demonstrate the efficiency of the proposed method and show the optimal behavior of the employed refinement method, the results of different conventional error estimators and refinement techniques (e.g., global uniform refinement, Kelly, and weighted Kelly techniques) are used for comparison. N2 - Einleitung und Motivation: 1- Im Laufe der letzten Jahrzehnte wurde den Mehrfeldproblemen und ihrer numerischen Analyse große Aufmerksamkeit gewidmet. Bei Mehrfeldproblemen wird die Wechselwirkung zwischen verschiedenen Feldern wie elastischen, elektrischen, magnetischen, chemischen oder thermischen Feldern untersucht. Eine wichtige Kategorie von Mehrfeldproblemen ist die Thermoelastizität. In der Thermoelastizität werden neben dem mechanischen Feld (Verschiebungen) auch das thermische Feld (Temperatur) und deren Auswirkungen aufeinander untersucht. 2- In fortgeschrittenen und sensible Anwendungen mit Temperaturänderung (z. B. LNG-, CNG- oder LPG-Speichertanks bei Sonnentemperatur im Sommer) ist die Elastizitätstheorie, die nur Verschiebungen berücksichtigt, nicht ausreichend. In diesen Fällen ist die Verwendung einer thermoelastischen Formulierung unumgänglich, um zuverlässige Ergebnisse zu erzielen. 3- Da eine analytische Lösung für thermoelastische Probleme sehr selten bestimmbar ist, wird sie durch numerische Methoden ersetzt. Allerdings sind die numerischen Ergebnisse nicht exakt und approximieren nur die exakte Lösung. Daher sind Fehler in den numerischen Ergebnissen unvermeidlich. 4- In jeder numerischen Simulation ist die Genauigkeit der Approximation das Hauptanliegen. Daher wurden verschiedene Fehlerschätzungstechniken entwickelt, um den Fehler der numerischen Lösung zu schätzen. Die herkömmlichen Fehlerschätzungsmethoden geben nur einen allgemeinen Überblick über die Gesamtgenauigkeit einer Näherungslösung. Bei vielen realen Problemen ist jedoch anstelle der Gesamtgenauigkeit die örtliche Genauigkeit (z. B. die Genauigkeit an einem bestimmten Punkt) von großem Interesse 5- Herkömmliche Fehlerschätzer berechnen Fehler in gewissen Normen. In der Ingenieurpraxis interessieren allerdings Fehler in anderen Zielgrößen, beispielsweise in der Last-Verformungs-Kurve oder in gewissen Spannungs-komponenten und speziellen Positionen. Dafür wurden sog. zielorientierte Fehlerschätzer entwickelt. 6- Die meisten numerischen Methoden unterteilen das Gebiet in kleine Teile (Element/Zelle), um das Problem zu lösen. Die Verwendung sehr feiner Elemente erhöht die Simulationsgenauigkeit, erhöht aber auch die Rechenzeit drastisch. Dieses Problem wird durch adaptive Methoden (AM) gelöst. AM können die Rechenzeit deutlich verringern. Bei adaptiven Methoden spielt die Fehlerschätzung eine Schlüsselrolle. Die Verfeinerung der Diskretisierung wird von einer Fehlerschätzung der Lösung kontrolliert und gesteuert (Elemente mit einem höheren geschätzten Fehler werden zur Verfeinerung/Aufteilung ausgewählt). Problemstellung und Zielsetzung der Arbeit 7- Die thermoelastischen Probleme können in zwei Hauptgruppen eingeteilt werden: Klassische Thermoelastizität (KTE) und klassische gekoppelte Thermoelastizität (KKTE). In jeder Gruppe werden verschiedene thermoelastische Probleme mit verschiedenen Geometrien, und Rand-/Anfangsbedingungen untersucht. In dieser Untersuchung werden die KTE- und KKTE-Probleme numerisch gelöst und alle numerischen Lösungen durch Fehlerschätzung bewertet. 8- In dieser Arbeit werden die Gesamtgenauigkeit der numerischen Lösung durch herkömmliche globale Fehlerschätzverfahren (auch als recovery-basierte Methoden bekannt) und die Genauigkeit der Lösung in bestimmten Punkten durch neue lokale Methoden (z. B. Dual-gewichtete Residuumsmethode oder DWR-Methode) bewertet. 9- Bei den dynamischen thermoelastischen Problemen ändern sich die Problembedin-gungen und anschließend die Lösung mit der Zeit. Daher werden die Fehler in jedem Zeitschritt geschätzt, um die Genauigkeit über die Zeit zu erhalten. 10- In dieser Dissertation wurde eine neue adaptive Gitter-Verfeinerung (AGV)-Technik entwickelt und für thermoelastische Probleme implementiert. Stand der Wissenschaft 11- Da die Thermoelastizität im Vergleich zu anderen mechanischen Bereichen wie der Elastizität nicht so umfangreich untersucht ist, wurden nur sehr begrenzte Untersuchungen durchgeführt, um die numerischen Fehler abzuschätzen und zu kontrollieren. Alle diese Untersuchungen konzentrierten sich auf die konventionellen Techniken, die nur den Gesamtfehler abschätzen können. Um die lokalen Fehler (wie punktweise Fehler oder Fehler an einem bestimmten Punkt) abzuschätzen, ist die Verwendung der zielorientierten Fehlerschätzungstechniken unvermeidlich. Die Implementierung der recovery-basierten zielorientierten Fehlerschätzung in der Thermoelastizität wird vor diesem Projekt nicht untersucht. 12- Viele numerische Analysen der dynamischen thermoelastischen Probleme basieren auf der Laplace-Transformationsmethode. Bei dieser Methode ist es praktisch nicht möglich, den Fehler in jedem Zeitschritt abzuschätzen. Daher wurden bisher die herkömmlichen globalen oder lokalen zielorientierten Fehlerschätzungsverfahren nicht in der dynamischen Thermoelastizität implementiert. 13- Eine der neuesten fortgeschrittenen zielorientierten Fehlerschätzungsmethoden ist die Dual-gewichtete Residuumsmethode (DWR-Methode). Die DWR-Methode, die punktweise Fehler (wie Verschiebungs-, mechanische Spannungs- oder Dehnungsfehler an einem bestimmten Punkt) abschätzen kann, wird bei elastischen Problemen angewendet. Es wurde jedoch kein Versuch unternommen, die DWR-Methode für die thermoelastischen Probleme zu formulieren. 14- In numerischen Simulationen sollte das Gitter verfeinert werden, um den Fehler zu verringern. Viele Verfeinerungstechniken basieren auf den globalen Fehlerschätzern, die versuchen, den Fehler der gesamten Lösung zu reduzieren. Daher sind diese Verfeinerungsmethoden zum reduzieren der lokalen Fehler nicht effizient. Wenn nur die Lösung an bestimmten Punkten interessiert ist und der Fehler dort reduziert werden will, sollten die zielorientierten Verfeinerungsmethoden angewendet werden, die vor dieser Untersuchung nicht in thermoelastischen Problemen entwickelt und implementiert wurden. 15- Die realen Probleme sind in der Regel 3D-Probleme, und die Simulation mit vereinfachten 2D-Fällen zeigt nicht alle Aspekte des Problems. Wie bereits erwähnt, sollten in der numerischen Simulation zur Erhöhung der Genauigkeit Gitterverfeinerungstechniken eingesetzt werden. Die konventionell verfeinerten Gitter, die durch gleichmäßige Aufteilung aller Elemente erreicht werden, erhöhen die Rechenzeit. Diese Simulationszeiterhöhung bei 3D-Problemen ist enorm. Dieses Problem wird durch die Verwendung der intelligenten Verfeinerung anstelle der globalen gleichmäßigen Verfeinerung gelöst. In diesem Projekt wurde erstmals die zielorientierte adaptive Gitterverfeinerung (AGV) bei thermoelastischen 3D-Problemen entwickelt und implementiert. Forschungsmethodik 16- In dieser Arbeit werden die beiden Haupttypen der thermoelastischen Probleme (KTE und KKTE) untersucht. Das System der partiellen Differentialgleichung der Thermoelastizität besteht aus zwei Hauptgleichungen: der herkömmlichen Gleichgewichtsgleichung und der Energiebilanzgleichung. 17- In diesem Projekt wird die Finite-Elemente-Methode (FEM) verwendet, um die Probleme numerisch zu simulieren. 18- Der Computercode zur Lösung von 2D- und 3D-Problemen wurde in den Program-miersprachen MATLAB bzw. C++ entwickelt. Um die Rechenzeit zu verkürzen und die Computerressourcen effizient zu nutzen, wurden Parallelprogrammierungs- und Optimierungsalgorithmen eingesetzt. 19- Nachdem die Probleme numerisch gelöst wurden, wurden zwei verschiedene Arten von globalen und lokalen Fehlerschätzungstechniken implementiert, um den Fehler zu schätzen und die Genauigkeit der Lösung zu messen. Der globale Typ ist die recovery-basierte zielorientierte Fehlerabschätzung, die wiederum in drei Unterkategorien von SPR-, L2-PR- und WSPR-Methoden unterteilt ist. Der lokale Typ ist die dual-gewichtete residuumsbasierte zielorientierte Fehlerabschätzung. Die Formulierung dieser Methoden wurde für thermoelastische Probleme entwickelt. 20- Schließlich wurde nach der Fehlerschätzung die entwickelte AGV-Methode implementiert. Wesentliche Ergebnisse und Schlussfolgerungen 21- In diesem Projekt wurde die Fehlerschätzung der Thermoelastizität in den folgenden drei Schritten untersucht: 1- Recovery-basierte Fehlerschätzung in statischen thermo Problemen (KTE), 2- Recovery-basierte Fehlerabschätzung in dynamischen thermo Problemen (KKTE), 3- Residuumsbasierte Fehlerschätzung in statischen thermo Problemen (KTE), 22- Im ersten Schritt, wurde das recovery-basierte Fehlerschätzverfahren auf mehrere stationäre thermoelastische Probleme angewendet. Einige der untersuchten Probleme verfügen über analytische Lösungen. Der Vergleich der numerischen Ergebnisse mit der analytischen (exakten) Lösung zeigt, dass die WSPR-Methode die genaueste unter den SPR, L2-PR und WSPR Techniken ist. 23- Darüber hinaus schließen wir aus den Ergebnissen des ersten Schritts, dass die zielorientierte Verfeinerung, im Vergleich zur herkömmlichen gleichmäßigen Total-Verfeinerungsmethode, nur ein Drittel der Unbekannten erfordert, um das Problem mit der gleichen Genauigkeit zu lösen. Daher benötigt die zielorientierte Adaptivität im Vergleich zu herkömmlichen Methoden viel weniger Rechenzeit, um die gleiche Genauigkeit zu erreichen. 24- Im zweiten Schritt, sind die Fehlerschätzungstechniken dieselben wie im ersten Schritt, aber die untersuchten Probleme sind dynamisch und nicht statisch. Der Vergleich der numerischen Ergebnisse mit den analytischen Ergebnissen in einem Benchmark-Problem bestätigt die Genauigkeit der verwendeten Methode. 25- Die Ergebnisse des zweiten Schritts zeigen, dass die geschätzten Fehler in allen gekoppelten Problemen niedriger sind als die ähnlichen ungekoppelten. Bei diesen Problemen reduziert die Implementierung der entwickelten adaptiven Methode den Fehler erheblich. 26- Im dritten Schritt wurde das residuumsbasierte Fehlerabschätzungsverfahren auf mehrere thermoelastische Probleme im stationären Zustand angewendet. In allen Beispielen wird die Genauigkeit der Methode durch analytische Lösungen überprüft. Die numerischen Ergebnisse zeigen eine sehr gute Übereinstimmung mit der analytischen Lösung sowohl bei 2D- als auch bei 3D-Problemen. 27- Im dritten Schritt werden die Ergebnisse der DWR-Verfeinerung mit Kelly-, W-Kelly- und gleichmäßigen Total-Verfeinerungstechniken verglichen. Die entwickelte DWR-Methode zeigt im Vergleich zu den anderen Methoden die beste Effizienz. Um beispielsweise die Fehlertoleranz von 10-6 zu erreichen, enthält das DWR-Gitter nur 2% unbekannte Parameter im Vergleich zu einem gleichmäßig verfeinerten Gitter. Die Verwendung des DWR-Verfahrens spart daher erhebliche Rechenzeit und Kosten. KW - Mesh Refinement KW - Thermoelastizität KW - Goal-oriented A Posteriori Error Estimation KW - 2D/3D Adaptive Mesh Refinement KW - Thermoelasticity KW - Deal ii C++ code KW - recovery-based and residual-based error estimators Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201113-42864 ER - TY - THES A1 - Pessoa, Suelen T1 - Why do the Archives archive? A journey from the hunko to the counter-ethnography and back N2 - A complex artistic research on the theme of cultural heritage and (neo)colonial processes of material and immaterial expropriation. Starting from the encounter with a phonographic relic at the Berliner Phonogramm-Archiv, the artist embarks on a journey to her own roots embodied in the practice of the Afro-Brazilian religion Candomblé. In the form of a theoretical treatise, an archive (photos, diagrams, maps, newspaper clippings, letters, documents), as well as a sound performance in the public space of the city of Weimar, several theoretical and performative elements are brought together in this transmedia artistic research that proposes a true decolonial practice. KW - Künstlerische Forschung KW - Museumskunde KW - Ethnologie KW - Candomblé KW - Brasilien KW - decolonisation KW - memoy KW - museum KW - visual arts KW - artistic research KW - Artistic Research KW - Museology KW - Counter-ethnography KW - Brazil Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210112-43280 ER - TY - CHAP A1 - Paul, Debus A1 - Rodehorst, Volker ED - Santos, Toledo T1 - Multi-Scale Flight Path Planning for UAS Building Inspection T2 - Proceedings of the 18th International Conference on Computing in Civil and Building Engineering N2 - Unmanned aircraft systems (UAS) show large potential for the construction industry. Their use in condition assessment has increased significantly, due to technological and computational progress. UAS play a crucial role in developing a digital maintenance strategy for infrastructure, saving cost and effort, while increasing safety and reliability. Part of that strategy are automated visual UAS inspections of the building’s condition. The resulting images can automatically be analyzed to identify and localize damages to the structure that have to be monitored. Further interest in parts of a structure can arise from events like accidents or collisions. Areas of low interest exist, where low resolution monitoring is sufficient. From different requirements for resolution, different levels of detail can be derived. They require special image acquisition parameters that differ mainly in the distance between camera and structure. Areas with a higher level of detail require a smaller distance to the object, producing more images. This work proposes a multi-scale flight path planning procedure, enabling higher resolution requirements for areas of special interest, while reducing the number of required images to a minimum. Careful selection of the camera positions maintains the complete coverage of the structure, while achieving the required resolution in all areas. The result is an efficient UAS inspection, reducing effort for the maintenance of infrastructure. KW - Drohne KW - Monitoring KW - Drohne KW - Flight path planning KW - UAS Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42053 UR - https://www.springer.com/gp/book/9783030512941 N1 - This is the pre-peer reviewed version of the article , presented at the 18th International Conference on Computing in Civil and Building Engineering (ICCBE), Sao Paulo, Brazil, August 18-20, 2020. VL - 2020 PB - Springer ER - TY - JOUR A1 - Partschefeld, Stephan A1 - Wiegand, Torben A1 - Bellmann, Frank A1 - Osburg, Andrea T1 - Formation of Geopolymers Using Sodium Silicate Solution and Aluminum Orthophosphate JF - Materials N2 - This paper reports the formation and structure of fast setting geopolymers activated by using three sodium silicate solutions with different modules (1.6, 2.0 and 2.4) and a berlinite-type aluminum orthophosphate. By varying the concentration of the aluminum orthophosphate, different Si/Al-ratios were established (6, 3 and 2). Reaction kinetics of binders were determined by isothermal calorimetric measurements at 20 °C. X-ray diffraction analysis as well as nuclear magnetic resonance (NMR) measurements were performed on binders to determine differences in structure by varying the alkalinity of the sodium silicate solutions and the Si/Al-ratio. The calorimetric results indicated that the higher the alkalinity of the sodium silicate solution, the higher the solubility and degree of conversion of the aluminum orthophosphate. The results of X-ray diffraction and Rietveldt analysis, as well as the NMR measurements, confirmed the assumption of the calorimetric experiments that first the aluminum orthophosphate was dissolved and then a polycondensation to an amorphous aluminosilicate network occurred. The different amounts of amorphous phases formed as a function of the alkalinity of the sodium silicate solution, indicate that tetrahydroxoaluminate species were formed during the dissolution of the aluminum orthophosphate, which reduce the pH value. This led to no further dissolution of the aluminum orthophosphate, which remained unreacted. KW - Geopolymere KW - geopolymer KW - berlinite KW - sodium silicate solution KW - alumosilicate KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43378 UR - https://www.mdpi.com/1996-1944/13/18/4202 VL - 2020 IS - Volume 13, issue 18, article 4202 SP - 1 EP - 16 PB - MDPI CY - Basel ER - TY - THES A1 - Oucif, Chahmi T1 - Analytical Modeling of Self-Healing and Super Healing in Cementitious Materials N2 - Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken. The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history. In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain. Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics. In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied. KW - Schaden KW - Beschädigung KW - Selbstheilung KW - Zementbeton KW - Damage KW - Healing KW - Concrete KW - Autonomous KW - Autogenous KW - Super Healing Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200831-42296 ER - TY - THES A1 - Oevermann, Heike T1 - Historische Industriekomplexe in der Stadt N2 - Das Buch greift die enge Verknüpfung von Industrialisierung und Urbanisierung auf, die in den letzten gut 250 Jahren Europas Städte und ihre Stadtbaugeschichte maßgeblich geprägt hat. Damit stellen sich auch vielfältige Fragen und Aufgaben für die Denkmalpflege. Die Habilitationsschrift leistet einen Beitrag, um die stadtbaugeschichtlichen und stadtbildprägenden Werte historischer Industriekomplexe zu erkennen und zu erhalten. Wie können wir die industriellen Stadtlandschaften erfassen? Wie gestalten wir Umnutzungen und Konversionen denkmalgerecht und beziehen im Rahmen eines Heritage-Managements Aspekte der nachhaltigen Stadtentwicklung ein? KW - Denkmalpflege KW - Architektur KW - Europa KW - Städtebau KW - Technisches Denkmal KW - Heritage KW - Industriekomplexe KW - Stadtbaugeschichte Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210203-43582 ER - TY - THES A1 - Oevermann, Heike T1 - Historische Industriekomplexe in der Stadt N2 - Das Buch greift die enge Verknüpfung von Industrialisierung und Urbanisierung auf, die in den letzten gut 250 Jahren Europas Städte und ihre Stadtbaugeschichte maßgeblich geprägt hat. Damit stellen sich auch vielfältige Fragen und Aufgaben für die Denkmalpflege. Die Habilitationsschrift leistet einen Beitrag, um die stadtbaugeschichtlichen und stadtbildprägenden Werte historischer Industriekomplexe zu erkennen und zu erhalten. Wie können wir die industriellen Stadtlandschaften erfassen? Wie gestalten wir Umnutzungen und Konversionen denkmalgerecht und beziehen im Rahmen eines Heritage-Managements Aspekte der nachhaltigen Stadtentwicklung ein? KW - Stadtbaugeschichte KW - Industriekomplexe KW - Heritage KW - Denkmalpflege KW - Europa KW - Erbe Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200615-41822 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4358 ER - TY - JOUR A1 - Nabipour, Narjes A1 - Mosavi, Amir A1 - Baghban, Alireza A1 - Shamshirband, Shahaboddin A1 - Felde, Imre T1 - Extreme Learning Machine-Based Model for Solubility Estimation of Hydrocarbon Gases in Electrolyte Solutions JF - Processes N2 - Calculating hydrocarbon components solubility of natural gases is known as one of the important issues for operational works in petroleum and chemical engineering. In this work, a novel solubility estimation tool has been proposed for hydrocarbon gases—including methane, ethane, propane, and butane—in aqueous electrolyte solutions based on extreme learning machine (ELM) algorithm. Comparing the ELM outputs with a comprehensive real databank which has 1175 solubility points yielded R-squared values of 0.985 and 0.987 for training and testing phases respectively. Furthermore, the visual comparison of estimated and actual hydrocarbon solubility led to confirm the ability of proposed solubility model. Additionally, sensitivity analysis has been employed on the input variables of model to identify their impacts on hydrocarbon solubility. Such a comprehensive and reliable study can help engineers and scientists to successfully determine the important thermodynamic properties, which are key factors in optimizing and designing different industrial units such as refineries and petrochemical plants. KW - Maschinelles Lernen KW - Machine learning KW - Deep learning Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200113-40624 UR - https://www.mdpi.com/2227-9717/8/1/92 VL - 2020 IS - Volume 8, Issue 1, 92 PB - MDPI ER - TY - JOUR A1 - Nabipour, Narjes A1 - Dehghani, Majid A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - Short-Term Hydrological Drought Forecasting Based on Different Nature-Inspired Optimization Algorithms Hybridized With Artificial Neural Networks JF - IEEE Access N2 - Hydrological drought forecasting plays a substantial role in water resources management. Hydrological drought highly affects the water allocation and hydropower generation. In this research, short term hydrological drought forecasted based on the hybridized of novel nature-inspired optimization algorithms and Artificial Neural Networks (ANN). For this purpose, the Standardized Hydrological Drought Index (SHDI) and the Standardized Precipitation Index (SPI) were calculated in one, three, and six aggregated months. Then, three states where proposed for SHDI forecasting, and 36 input-output combinations were extracted based on the cross-correlation analysis. In the next step, newly proposed optimization algorithms, including Grasshopper Optimization Algorithm (GOA), Salp Swarm algorithm (SSA), Biogeography-based optimization (BBO), and Particle Swarm Optimization (PSO) hybridized with the ANN were utilized for SHDI forecasting and the results compared to the conventional ANN. Results indicated that the hybridized model outperformed compared to the conventional ANN. PSO performed better than the other optimization algorithms. The best models forecasted SHDI1 with R2 = 0.68 and RMSE = 0.58, SHDI3 with R 2 = 0.81 and RMSE = 0.45 and SHDI6 with R 2 = 0.82 and RMSE = 0.40. KW - Maschinelles Lernen KW - Machine learning KW - Deep learning KW - Hydrological drought KW - precipitation KW - hydrology Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200213-40796 UR - https://ieeexplore.ieee.org/document/8951168 VL - 2020 IS - volume 8 SP - 15210 EP - 15222 PB - IEEE ER - TY - THES A1 - Müller, Jan Philip T1 - Audiovision und Synchronisation. Sehen, Hören und Gleichzeitigkeit in Anordnungen vom Observatorium über psychologische Experimente bis zum Tonfilm im 19. und 20. Jahrhundert N2 - In dieser Untersuchung wird eine Geschichte von Problemen der Gleichzeitigkeit zwischen Sehen und Hören, beziehungsweise der Synchronität von Bild und Ton, bis zur Entstehung des Tonfilms rekonstruiert. Dabei werden Linien gezogen zwischen diskursiven Konfigurationen und medialen Anordnungen, in denen das Verhältnis von Sehen und Hören oder Bild und Ton als zeitliches erscheint – in denen Sehen und Hören, Bild und Ton zwischen Mannigfaltigkeit und Einheit verschmelzen, auseinanderfallen, interagieren, redundant oder spezifisch werden, einander ergänzen, dominieren, verfehlen verdrängen, aufspalten… Tonfilm ist in der Kinogeschichte eben nicht nur eine Ergänzung. Vielmehr ähnelt er dem Auftritt eines Gespensts, das das Wissen und die Techniken der Trennung der Sinne schon länger, vielleicht schon immer begleitet hatte. Das Auftreten des Tonfilms ist auch überhaupt früher Anlass eines weitreichenden Diskurses darüber, was Audiovision eigentlich sein könnte und sollte. Noch allgemeiner könnte auch davon gesprochen werden, dass Tonfilm eins der ersten großen Projekte der Konvergenz technischer Medien ist, die heute – besonders angesichts des Computers – als entscheidender Aspekt von Mediengeschichte erscheint. Die Linien der Probleme von Gleichzeitigkeit/Ungleichzeitigkeit an den Schnittstellen von Wissen, Technik und Ästhetik werden insbesondere durch drei Felder hindurch nachgezeichnet: 1) Die Geschichte von Intermodalität in Bezug auf die Frage nach Gleichzeitigkeit und Ungleichzeitigkeit als Problem und Gegenstand von Wissenschaft seit dem 19. Jahrhundert, vornehmlich in zwei Gebieten: Als Fehlerquelle im astronomischen Observatorium bei der Messung, Feststellung und Vereinheitlichung von Raum und Zeit, die auf individuelle Abweichungen Intermodaler Wahrnehmung verweist und als Problem der „persönlichen Gleichung“ weit über die Astronomie hinaus Karriere macht. Als heiße Zone wahrnehmungspsychologischer Experimente und ihrer Apparate seit der Mitte des 19. Jahrhunderts, die mit dem Konzept der „Komplikation“ Fragen nach einer Synthese der Sinneswahrnehmungen und damit letztlich nach der Selbstgegenwart des Menschen stellt. 2) Eine Technikgeschichte des Problems auditive und visuelle Zeitmedien – wie Phonograph und Film – zu koppeln, zu synchronisieren. Darin eskalieren zwei zeitkritische Relationen: Einerseits zwischen diskreter, intermittierender Bewegung des Films und stetiger, kontinuierlicher Bewegung des Phonographen, andererseits in Bezug darauf, an welcher Stelle – wo und wann – audiovisuelle Gegenwart des Kinos ensteht; oder auch verfehlt wird. 3) Eine Geschichte von Filmtheorie und -ästhetik, in der sich mit der Durchsetzung des Tonfilms um 1930 die Frage stellt, was dieses neue Medium sei und was damit zu tun. Diese Verhandlungen spannen sich zwischen dem formulierten Ziel einer spezifischen Illusion oder Präsenz von Tonfilm durch Synchronität auf der einen Seite und der sich aus dem Verdacht des Betrugs durch Synchronität ergebenden Forderung nach „Asynchronismus“ als kritischer Methode auf der anderen Seite auf. Ausgehend von der These, dass im 19. Jahrhundert die Sinne aufgeteilt werden, dann wird in diesen Anordnungen an irgendeiner Stelle Heterogenes gleichzeitig passieren. An welcher Stelle? Und was bedeuten diese (Un-)Gleichzeitigkeiten? Was dabei - sehr allgemein gesprochen - auf dem Spiel steht, sind Möglichkeiten einer audiovisuell geteilten – getrennten oder gemeinsamen - Welt und Gegenwart. KW - Tonfilm KW - Asynchronität KW - Ästhetik KW - Medien KW - Geschichte KW - Audiovision KW - Synchronisation KW - Synchronisierung KW - Sinne KW - Technik Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201123-42906 ER - TY - JOUR A1 - Mousavi, Seyed Nasrollah A1 - Steinke Júnior, Renato A1 - Teixeira, Eder Daniel A1 - Bocchiola, Daniele A1 - Nabipour, Narjes A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - Predictive Modeling the Free Hydraulic Jumps Pressure through Advanced Statistical Methods JF - Mathematics N2 - Pressure fluctuations beneath hydraulic jumps potentially endanger the stability of stilling basins. This paper deals with the mathematical modeling of the results of laboratory-scale experiments to estimate the extreme pressures. Experiments were carried out on a smooth stilling basin underneath free hydraulic jumps downstream of an Ogee spillway. From the probability distribution of measured instantaneous pressures, pressures with different probabilities could be determined. It was verified that maximum pressure fluctuations, and the negative pressures, are located at the positions near the spillway toe. Also, minimum pressure fluctuations are located at the downstream of hydraulic jumps. It was possible to assess the cumulative curves of pressure data related to the characteristic points along the basin, and different Froude numbers. To benchmark the results, the dimensionless forms of statistical parameters include mean pressures (P*m), the standard deviations of pressure fluctuations (σ*X), pressures with different non-exceedance probabilities (P*k%), and the statistical coefficient of the probability distribution (Nk%) were assessed. It was found that an existing method can be used to interpret the present data, and pressure distribution in similar conditions, by using a new second-order fractional relationships for σ*X, and Nk%. The values of the Nk% coefficient indicated a single mean value for each probability. KW - Maschinelles Lernen KW - Machine learning KW - mathematical modeling KW - extreme pressure KW - hydraulic jump KW - stilling basin KW - standard deviation of pressure fluctuations KW - statistical coeffcient of the probability distribution Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200402-41140 UR - https://www.mdpi.com/2227-7390/8/3/323 VL - 2020 IS - Volume 8, Issue 3, 323 PB - MDPI CY - Basel ER - TY - JOUR A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin A1 - Esmaeilbeiki, Fatemeh A1 - Zarehaghi, Davoud A1 - Neyshabouri, Mohammadreza A1 - Samadianfard, Saeed A1 - Ghorbani, Mohammad Ali A1 - Nabipour, Narjes A1 - Chau, Kwok-Wing T1 - Comparative analysis of hybrid models of firefly optimization algorithm with support vector machines and multilayer perceptron for predicting soil temperature at different depths JF - Engineering Applications of Computational Fluid Mechanics N2 - This research aims to model soil temperature (ST) using machine learning models of multilayer perceptron (MLP) algorithm and support vector machine (SVM) in hybrid form with the Firefly optimization algorithm, i.e. MLP-FFA and SVM-FFA. In the current study, measured ST and meteorological parameters of Tabriz and Ahar weather stations in a period of 2013–2015 are used for training and testing of the studied models with one and two days as a delay. To ascertain conclusive results for validation of the proposed hybrid models, the error metrics are benchmarked in an independent testing period. Moreover, Taylor diagrams utilized for that purpose. Obtained results showed that, in a case of one day delay, except in predicting ST at 5 cm below the soil surface (ST5cm) at Tabriz station, MLP-FFA produced superior results compared with MLP, SVM, and SVM-FFA models. However, for two days delay, MLP-FFA indicated increased accuracy in predicting ST5cm and ST 20cm of Tabriz station and ST10cm of Ahar station in comparison with SVM-FFA. Additionally, for all of the prescribed models, the performance of the MLP-FFA and SVM-FFA hybrid models in the testing phase was found to be meaningfully superior to the classical MLP and SVM models. KW - Bodentemperatur KW - Algorithmus KW - Maschinelles Lernen KW - Neuronales Netz KW - firefly optimization algorithm KW - soil temperature KW - artificial neural networks KW - hybrid machine learning KW - OA-Publikationsfonds2019 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200911-42347 UR - https://www.tandfonline.com/doi/full/10.1080/19942060.2020.1788644 VL - 2020 IS - Volume 14, Issue 1 SP - 939 EP - 953 ER - TY - JOUR A1 - Mosavi, Amir Hosein A1 - Shokri, Manouchehr A1 - Mansor, Zulkefli A1 - Qasem, Sultan Noman A1 - Band, Shahab S. A1 - Mohammadzadeh, Ardashir T1 - Machine Learning for Modeling the Singular Multi-Pantograph Equations JF - Entropy N2 - In this study, a new approach to basis of intelligent systems and machine learning algorithms is introduced for solving singular multi-pantograph differential equations (SMDEs). For the first time, a type-2 fuzzy logic based approach is formulated to find an approximated solution. The rules of the suggested type-2 fuzzy logic system (T2-FLS) are optimized by the square root cubature Kalman filter (SCKF) such that the proposed fineness function to be minimized. Furthermore, the stability and boundedness of the estimation error is proved by novel approach on basis of Lyapunov theorem. The accuracy and robustness of the suggested algorithm is verified by several statistical examinations. It is shown that the suggested method results in an accurate solution with rapid convergence and a lower computational cost. KW - Fuzzy-Regelung KW - square root cubature calman filter KW - statistical analysis KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43436 UR - https://www.mdpi.com/1099-4300/22/9/1041 VL - 2020 IS - volume 22, issue 9, article 1041 SP - 1 EP - 18 PB - MDPI CY - Basel ER - TY - JOUR A1 - Mosavi, Amir Hosein A1 - Qasem, Sultan Noman A1 - Shokri, Manouchehr A1 - Band, Shahab S. A1 - Mohammadzadeh, Ardashir T1 - Fractional-Order Fuzzy Control Approach for Photovoltaic/Battery Systems under Unknown Dynamics, Variable Irradiation and Temperature JF - Electronics N2 - For this paper, the problem of energy/voltage management in photovoltaic (PV)/battery systems was studied, and a new fractional-order control system on basis of type-3 (T3) fuzzy logic systems (FLSs) was developed. New fractional-order learning rules are derived for tuning of T3-FLSs such that the stability is ensured. In addition, using fractional-order calculus, the robustness was studied versus dynamic uncertainties, perturbation of irradiation, and temperature and abruptly faults in output loads, and, subsequently, new compensators were proposed. In several examinations under difficult operation conditions, such as random temperature, variable irradiation, and abrupt changes in output load, the capability of the schemed controller was verified. In addition, in comparison with other methods, such as proportional-derivative-integral (PID), sliding mode controller (SMC), passivity-based control systems (PBC), and linear quadratic regulator (LQR), the superiority of the suggested method was demonstrated. KW - Fuzzy-Logik KW - Fotovoltaik KW - type-3 fuzzy systems KW - fractional-order control KW - battery KW - photovoltaic KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43381 UR - https://www.mdpi.com/2079-9292/9/9/1455 VL - 2020 IS - Volume 9, issue 9, article 1455 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Meng, Yinghui A1 - Noman Qasem, Sultan A1 - Shokri, Manouchehr A1 - Shamshirband, Shahaboddin T1 - Dimension Reduction of Machine Learning-Based Forecasting Models Employing Principal Component Analysis JF - Mathematics N2 - In this research, an attempt was made to reduce the dimension of wavelet-ANFIS/ANN (artificial neural network/adaptive neuro-fuzzy inference system) models toward reliable forecasts as well as to decrease computational cost. In this regard, the principal component analysis was performed on the input time series decomposed by a discrete wavelet transform to feed the ANN/ANFIS models. The models were applied for dissolved oxygen (DO) forecasting in rivers which is an important variable affecting aquatic life and water quality. The current values of DO, water surface temperature, salinity, and turbidity have been considered as the input variable to forecast DO in a three-time step further. The results of the study revealed that PCA can be employed as a powerful tool for dimension reduction of input variables and also to detect inter-correlation of input variables. Results of the PCA-wavelet-ANN models are compared with those obtained from wavelet-ANN models while the earlier one has the advantage of less computational time than the later models. Dealing with ANFIS models, PCA is more beneficial to avoid wavelet-ANFIS models creating too many rules which deteriorate the efficiency of the ANFIS models. Moreover, manipulating the wavelet-ANFIS models utilizing PCA leads to a significant decreasing in computational time. Finally, it was found that the PCA-wavelet-ANN/ANFIS models can provide reliable forecasts of dissolved oxygen as an important water quality indicator in rivers. KW - Maschinelles Lernen KW - machine learning KW - dimensionality reduction KW - wavelet transform KW - water quality KW - principal component analysis KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200811-42125 UR - https://www.mdpi.com/2227-7390/8/8/1233 VL - 2020 IS - volume 8, issue 8, article 1233 PB - MDPI CY - Basel ER - TY - THES A1 - Mendonça de Almeida, Karina T1 - Why isn't Google welcome in Kreuzberg? Social movement and the effects of Internet on urban space N2 - Advances in information and communication technologies such as the Internet have driven a great transformation in the interactions between individuals and the urban environment. As the use of the Internet in cities becomes more intense and diverse, there is also a restructuring of urban space, which is experienced by groups in society in various ways, according to the specificity of each context. Accordingly, large Internet companies have emerged as new players in the processes of urbanization, either through partnerships with the public administration or through various services offered directly to urban residents. Once these corporations are key actors in the digitalization of urban services, their operations can affect the patterns of urban inequality and generate a series of new struggles over the production of space. Interested in analyzing this phenomena from the perspective of civil society, the present Master Thesis examined a social movement that prevented Google to settle a new startup campus in the district of Kreuzberg, in Berlin. By asking why Google was not welcome in that context, this study also sought to understand how internet, as well as its main operators, has affected everyday life in the city. Thus, besides analyzing the movement, I investigated the particularities of the urban context where it arose and the elements that distinguish the mobilization’s opponent. In pursuit of an interdisciplinary approach, I analyzed and discussed the results of empirical research in dialogue with critical theories in the fields of urban studies and the Internet, with emphasis on Castells' definitions of urban social movements and network society (1983, 2009, 2015), Couldry's and Mejias' (2019) idea of data colonialism, Lefèbvre's (1991, 1996) concepts of abstract space and the right to the city, as well as Zuboff's (2019) theory of surveillance capitalism. The case at hand has exposed that Google plays a prominent role in the way the Internet has been developed and deployed in cities. From the perspective accessed, the current appropriation of Internet technologies has been detrimental to individual autonomy and has contributed to intensifying existing inequalities in the city. The alternative vision to this relies mainly on the promotion of decentralized solidarity networks. KW - Soziale Bewegung KW - Internet KW - Stadt KW - Social movement KW - urban space KW - Internet KW - tech company KW - Berlin Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200924-42446 ER - TY - CHAP A1 - Massumi, Brian T1 - Kollektiver Ausdruck: Eine radikale Pragmatik T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - Das spekulative Handbuch bietet vielfältige Techniken für ein radikales Lernen und Vermitteln. Es umfasst konkrete Anleitungen, Erfahrungen und theoretische Überlegungen. Die Texte beteiligen sich an der Konzeption einer Vermittlung, die das gemeinsame Experimentieren (wieder) einführt. Im Seminarraum, in Workshops, auf Festivals, in Fluren, Parks und der Stadt finden Lernen und Verlernen statt. Texte und Anleitungen u. a. zu: Filmessays, Collagen, Banküberfällen, der Universität der Toten, wildem Schreiben, konzeptuellem speed Dating, neurodiversem Lernen, Format-Denken, dem Theater der Sorge, dem Schreiblabor, dem Körperstreik. KW - Philosophie KW - Charles Sanders Peirce KW - Speed Dating Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42561 UR - https://nocturne-plattform.de/text/kollektiver-ausdruck SP - 187 EP - 207 PB - Nocturne CY - Berlin und Weimar ER - TY - THES A1 - Markert, Michael T1 - Räumliche Navigation durch richtungsgebundene Stereofonie N2 - Die Verbreitung mobiler Smartphones und besonders deren allgegenwärtige Lokalisierungstechnologien verändern das Navigationsverhalten im Raum nachhaltig. Parallel zur schnell voranschreitenden Entwicklung alltäglicher Geräte, die mitgeführt werden, setzt der Übergang der bereits länger dauernden Entwicklung von Virtual-Reality-Technik in eine erweiterte und augmentierte Mixed Reality ein. In diesem Spannungsfeld untersucht die vorliegende Arbeit, inwieweit richtungsgebundene und binaural wiedergegebene Stereofonie die menschliche Bewegung im Raum beeinflussen kann und versucht zu erörtern, welche Potenziale in der Wiederentdeckung einer relativ lange bekannten Technik liegen. Der Autor hat im Rahmen dieser Arbeit eine binaurale mobile Applikation für richtungsgebundene Stereofonie entwickelt, mit der virtuelle bewegte oder statische Audio-Hotspots im Raum platziert werden können. So kann links, rechts oder 30 Meter vor einer Person ein virtueller oder tatsächlicher Klang im Raum verortet sein. Durch die in Echtzeit berechnete binaurale Wiedergabe der Klangquellen mit einem Stereo-Kopfhörer können diese räumlich verorteten Klänge mit zwei Ohren dreidimensional wahrgenommen werden, ähnlich dem räumlichen Sehen mit zwei Augen. Durch den Einsatz mehrerer lokalisierter Klangquellen als Soundscape entsteht eine augmentierte auditive Realität, die die physische Realität erweitert. Die Position und Navigation des Nutzers wird durch binaurale Lautstärkenmodulation (die Lautstärke nimmt bei abnehmender Distanz zur Quelle zu) und Stereopanning mit Laufzeitmodulation (die Richtung wird über ein Stereosignal auf beiden Ohren räumlich links-rechts-vorne verortet) interaktiv und kybernetisch beeinflusst. Die Nutzer navigieren — durch ihr Interesse an den hörbaren virtuellen Klangquellen geleitet — durch einen dynamisch erzeugten, dreidimensionalen akustischen Raum, der gleichzeitig ein virtueller und kybernetischer Raum ist, da die Repräsentation der Klänge an die Bewegung und Ausrichtung der Nutzer im Raum angepasst wird. Diese Arbeit untersucht, ob die Bewegung von Menschen durch (virtuelle) Klänge beeinflusst werden kann und wie groß oder messbar dieser Einfluss ist. Dabei können nicht alle künstlerischen, architektonischen und philosophischen Fragen im Rahmen der vorliegenden Schrift erörtert werden, obwohl sie dennoch als raumtheoretische Fragestellung von Interesse sind. Hauptgegenstand der vorliegenden Arbeit liegt in der Erforschung, ob richtungsgebundene Stereofonie einen relevanten Beitrag zur menschlichen Navigation, hauptsächlich zu Fuß, in urbanen Gebieten — vorwiegend im Außenraum — leisten kann. Der erste Teil gliedert sich in »Raum und Klang«, es werden raumtheoretische Überlegungen zur menschlichen Bewegung im Raum, Raumvorstellungen, räumliche Klänge und Klangwahrnehmung sowie die Entwicklung stereofoner Apparaturen und Aspekte der Augmented Audio Reality besprochen. Im zweiten Teil werden drei Demonstratoren als Anwendungsszenarien und drei Evaluierungen im Außenraum vorgestellt. Die Tests untersuchen, ob sich das Verfahren zur Navigation für Fußgänger eignet und inwieweit eine Einflussnahme auf das Bewegungsverhalten von Nutzern getroffen werden kann. Die Auswertungen der Tests zeigen, dass sich stereofone Klänge grundsätzlich als Navigationssystem eignen, da eine große Mehrzahl der Teilnehmer die akustisch markierten Ziele leicht gefunden hat. Ebenso zeigt sich ein klarer Einfluss auf die Bewegungsmuster, allerdings ist dieser abhängig von individuellen Interessen und Vorlieben. Abschließend werden die Ergebnisse der Untersuchungen im Kontext der vorgestellten Theorien diskutiert und die Potenziale stereofoner Anwendungen in einem Ausblick behandelt. Bei der Gestaltung, Erzeugung und Anwendung mobiler Systeme sind unterschiedliche mentale und räumliche Modelle und Vorstellungen der Entwickler und Anwender zu beachten. Da eine umfassende transdisziplinäre Betrachtung klare Begrifflichkeiten erfordert, werden Argumente für ein raumtheoretisches Vokabular diskutiert. Diese sind für einen gestalterischen Einsatz von richtungsgebundener Stereofonie — besonders im Kontext mobiler Navigation durch akustisch augmentierte Räume — äußerst relevant. KW - Raum KW - Stereophonie KW - Raumklang KW - Erweiterte Realität KW - Kybernetik KW - Stereofonie KW - Augmented Audio Reality KW - Mensch-Maschine-Interaktion KW - Navigation KW - Localised Sound KW - Mensch-Maschine-Kommunikation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201214-43038 ER -