TY - JOUR A1 - Abrahamczyk, Lars A1 - Uzair, Aanis T1 - On the use of climate models for estimating the non-stationary characteristic values of climatic actions in civil engineering practice JF - Frontiers in Built Environment N2 - The characteristic values of climatic actions in current structural design codes are based on a specified probability of exceedance during the design working life of a structure. These values are traditionally determined from the past observation data under a stationary climate assumption. However, this assumption becomes invalid in the context of climate change, where the frequency and intensity of climatic extremes varies with respect to time. This paper presents a methodology to calculate the non-stationary characteristic values using state of the art climate model projections. The non-stationary characteristic values are calculated in compliance with the requirements of structural design codes by forming quasi-stationary windows of the entire bias-corrected climate model data. Three approaches for the calculation of non-stationary characteristic values considering the design working life of a structure are compared and their consequences on exceedance probability are discussed. KW - Klimaänderung KW - Bauwerk KW - climate change KW - climate models KW - extreme value analysis KW - characteristic value KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63751 UR - https://www.frontiersin.org/articles/10.3389/fbuil.2023.1108328/full VL - 2023 IS - volume 9, article 1108328 SP - 1 EP - 9 PB - Frontier Media CY - Lausanne ER - TY - CHAP A1 - Hauschild, Thomas A1 - Hübler, Reinhard T1 - Aspekte der verteilten Bauwerksmodellierung in kooperativen Entwurfsumgebungen auf Basis dynamischer Objektstrukturen N2 - Entwurfsprozesse im Bauwesen sind hochgradig kooperative Prozesse mit alternierenden Phasen asynchroner und synchroner Teamarbeit. Die Informationen über den aktuellen Entwurfsgegenstand können als Objektstrukturen modelliert werden, die in entsprechenden Modellverwaltungssystemen gespeichert werden. Bei der Realisierung von kooperativ nutzbaren Umgebungen für den Bauwerksentwurf sind jedoch bei der Auswahl von Basistechniken spezifische Anforderungen von CSCW-Applikationen zu beachten, die bestimmte traditionelle Verfahren nicht erfüllen. Neben verschiedenen Auswirkungen auf das Interaktionsverhalten der Entwurfsumgebung spielt die cooperation awareness der eingesetzten Mechanismen eine bedeutende Rolle. Mechanismen zur Zugriffskontrolle sind in netzwerkbasierten Mehrbenutzerumgebungen essentiell, jedoch sind herkömmliche Verfahren zu unflexibel und nicht hinreichend ausdrucksstark. Eine adaptierte und erweiterte Variante des Matrixverfahrens ist für die Anwendung in Modellverwaltungssystemen geeignet. Ebenso muss bei der Auswahl von Mechanismen zur Nebenläufigkeitskontrolle Augenmerk auf dessen Eignung in Groupware-Systemen gelegt werden. Bei der Unterstützung asynchroner Kooperation können Lock-Verfahren auf die Informationen in Modellverwaltungssystemen angewandt werden. Für die Applikationen für synchrone Teamarbeit müssen derartige Mechanismen auf die gemeinsamen Informationsbestände sowie auf Systemressourcen der Entwurfsumgebung angewendet werden. Hierfür sind floor-passing'-Verfahren geeignet; die Anwendbarkeit von Transformationsverfahren sollte für die konkret umzusetzende Applikation geprüft werden. KW - Bauwerk KW - CAD KW - Objektmodell Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5912 ER - TY - JOUR A1 - Voronin, V. P. T1 - Renovation's peculiarities of industrial enterprises in conditions of economic selfsufficiency N2 - Probleme of recrienfation of building complex, to the sharp increase of share of reconstruction works, capital repair and modernisation of in-dustrial plants are concidered in this work. The conception of develop-ment and creation of unitified system of expluatation and renovation of industrial plants are worded out. This system is based on date-computer technology and taking into conciderations of real economic relations. KW - Bauwerk KW - Rekonstruktion KW - Wirtschaftlichkeit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5296 ER - TY - JOUR A1 - Ngo, D. Q. A1 - Rüppel, Uwe T1 - BINAS - Ein Entscheidungshilfesystem für die Bestandsanalyse von Bauwerken N2 - Bauwerke sind in ihrer Betriebszeit vielen nutzungseinschränkenden Einflüssen ausgesetzt. Die dadurch erforderliche Instandhaltung dient zur Gewährleistung und zur Erhöhung der geplanten Nutzungsfähigkeit sowie Dauerhaftigkeit von Bauwerken. Sie spielt eine immer größere Rolle im Bauwesen. Die Kosten der Bauwerksinstandhaltung betragen je nach Art des Bauwerkes in Deutschland pro Jahr ca. 1-6% des Wiederbeschaffungswertes. Die Reduzierung des Instandhaltungsaufwandes durch Technik- und Management-Maßnahmen ist daher wirtschaftlich sinnvoll. Der Einsatz moderner Informations- und Kommunikationstechnologie auf dem Gebiet der Bestandsaufnahme und -analyse ist erforderlich, um einerseits die Bearbeitung von multimedialen Informationen über Ist- und Soll-Zustände von Bauwerken effektiver durchzuführen und um andererseits die Analyse von Schäden im Sinne einer Entscheidungshilfe zu unterstützen. Durch den Einsatz der WWW-Technologie kann die Bearbeitung auch verteilt im Datennetz über ferne Rechner hinweg erfolgen. Im Beitrag werden die Konzeptionierung und Implementierung des WWW-fähigen DV-Systems BINAS zur Unterstützung der Bestandsaufnahme und -analyse sowie die dafür erforderlichen Methoden und Werkzeuge vorgestellt. KW - Bauwerk KW - Bauschaden KW - Instandhaltung KW - Entscheidungsunterstützungssystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4994 ER - TY - JOUR A1 - Wiedemann, A. T1 - Digital Architectural Photogrammetry for Building Registration N2 - For many purposes geometric information about existing buildings is necessary, e.g. planing of conservation or reconstruction. Architectural photogrammetry is a technique to acquire 3D geometric data of buildings for a CAD model from images. In this paper the state of the art in architectural photogrammetry and some developments towards automation are described. The photogrammetric process consists of image acquisition, orientation and restitution. Special attention is put on digital methods, from digital image acquisition to restitution methods, supported by digital image processing. There are a few field of development towards automation, e.g. feature extraction, extraction of edges and lines and the detection of corresponding points. The acquired data may be used in a CAD environment or for visualization in Virtual Reality Models, using digital orthoimages for texture mapping. KW - Bauwerk KW - Projektdokumentation KW - Photogrammetrie Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4892 ER - TY - JOUR A1 - Peters, F. A1 - Petersen, Michael A1 - Meißner, Udo F. T1 - Bestandsverwaltung und -bewirtschaftung durch integratives Informationsmanagement N2 - Neben der reinen Bauausführung und den damit verbundenen Roh- und Ausbaukosten stellt insbesondere die Bewirtschaftung von Gebäuden einen wesentlichen Kostenfaktor dar, den zu minimieren Ziel der Bestrebungen auf dem Gebiet des Facilities Management ist. Insbesondere die Integration der verteilt vorliegenden Informationen muß hierbei das Ziel sein, um durch effiziente Informationsverarbeitung eine Einsparung von Unterhaltskosten zu erreichen. Bereits in der Planungsphase lassen sich die späteren Kosten für die Bewirtschaftung modellieren. Dies gilt auch für die Modellierung des Energiehaushaltes von Gebäuden. Für die Modellierung des Wärmeschutzes und der damit verbundenen Ermittlung des Heizenergiebedarfs werden z.Zt. starke Vereinfachungen getroffen, die durch die aktuelle Wärmeschutzverordnung vorgegeben sind, so daß die errechneten Werte meist sehr ungenau sind. Für eine DV-gerechte Modellierung eines Gebäudes während seiner Bewirtschaftung reichen herkömmliche CAD-Systeme nicht aus, da das Modell verschiedene Sichten zulassen muß: Neben einer bauteilorientierten Sicht muß auch eine raumorientierte Sicht vorgehalten werden, damit eine Modellierung von flächenbezogenen Parametern wie z.B. Kosten möglich wird. Dieser Beitrag zeigt einen Ansatz, der eine intensive Nutzung heterogener Ressourcen und Informationen auf der Grundlage eines dreidimensionalen Gebäudemodells ermöglicht. Exemplarisch für die Bereiche Raummanagement (im Sinne von kosten- und nutzungsorientierter Bestandsverwaltung) und Bauphysik wird dieser Ansatz erläutert und die Eingliederung dieser Teilgebiete der Bestandsverwaltung und -bewirtschaftung in ein Gesamtsystem aufgezeigt. KW - Bauwerk KW - Langzeitverhalten KW - Facility-Management KW - Informationsmanagement Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4848 ER - TY - JOUR A1 - Rüppel, Uwe T1 - Multimediale Gestaltung von Bestandsverwaltungsprozessen im Bauwesen N2 - Die Kosten für die Unterhaltung von Bauwerken über den Lebenszyklus sind im Vergleich zu den Planungs- und Herstellungskosten erheblich größer. Insbesondere setzt eine Reduzierung des Instandhaltungsaufwandes als Teilprozeß der Bestandsverwaltung das rechtzeitige Erkennen von Bauschäden und das vorausschauende Ergreifen von Gegenmaßnahmen voraus. Das planmäßige Vorgehen beim Erkennen von Bauschäden, d.h. die regelmäßige Überwachung baulicher Anlagen, dient nicht nur dem sparsamen Umgang mit vorhandenen Mitteln, sondern verringert auch die Gefahr des plötzlichen Versagens von tragenden Bauteilen. Dadurch werden Gefahren für die Nutzer der Bauwerke frühzeitig abgewendet. Die Notwendigkeit der systematischen Instandhaltung mit modernen Methoden wird auch in den Schlußfolgerungen des dritten Bauschadensberichts des Bundesministeriums für Raumordnung, Bauwesen und Städtebau unterstrichen. Um den Zustand eines Bauteils festzustellen, werden ausreichende Informationen über Struktur, Material, Alter, Belastungen, Umweltbedingungen etc. benötigt. Zur Verarbeitung dieser Fülle von Informationen unterschiedlichen Typs (z.B. technische Dokumente, CAD-Zeichnungen, Photos etc.) bei der Überwachung und Dokumentation baulicher Anlagen ist eine geeignete DV-Unterstützung notwendig. Zur Verwaltung der komplexen Baustrukturinformationen werden objektorientierte Bauwerksmodelle benötigt. Zur bedarfsgerechten Aufbereitung der unterschiedlichen Informationsarten und -qualitäten ist zusätzlich eine multimediale Informationsverarbeitung sowohl intern als auch in der Benutzungsschnittstelle erforderlich. Im Beitrag werden die Grundlagen objektorientierter Methoden zur Bauwerksmodellierung sowie von Multimedia mit den Bereichen Text, Graphik (Vektor- und Pixelgraphik), Audio, Photo und Video einschließlich deren Verknüpfungsmöglichkeiten im Sinne von Hypermedia an Beispielen erläutert. Zusätzlich werden aktuelle Entwicklungstendenzen im Bereich der Telekommunikation mit den Möglichkeiten des Computernetzes INTERNET zur Bestandsverwaltung in verteilten Systemen aufgezeigt. Abschließend werden Anwendungen der objektorientierten und multimedialen Informationsverarbeitung in der täglichen Ingenieurpraxis am Beispiel des DV-Systems BestandManager zur Überwachung und Dokumentation baulicher Anlagen vorgestellt. KW - Bauwerk KW - Langzeitverhalten KW - Bauschaden KW - Instandhaltung KW - Objektmodell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4839 ER - TY - CHAP A1 - Kolbe, P. A1 - Ranglack, D. A1 - Steinmann, Frank T1 - Eine Schnittstelle für dynamische Objektstrukturen für Entwurfsanwendungen N2 - Trotz der langjährigen Erfahrung bei der Anwendung objektorientierter Konzepte bei der Modellierung von Gebäuden ist es bisher nicht gelungen, ein allgemein anerkanntes Gebäudemodell im Rechner abzubilden. Das mag zum einen daran liegen, daß die Standardisierung eines solchen Modells bis heute zu keinem Abschluß gekommen ist. Zum anderen aber scheint vor allem die Problematik der Abbildung eines solchen Gebäudemodells in das Objektmodell einer Programmiersprache bisher unterschätzt worden zu sein. Die erhoffte Durchgängigkeit von objektorientierter Analyse, Entwurf und Programmierung gelingt bei Anwendungen für Entwurfsaufgaben nicht. Das gilt vor allem für Anwendungen, die frühe Entwurfsphasen unterstützen und damit erst zur Definition eines Gebäudemodells beitragen. Im Bereich der Softwareentwicklung wird das Konzept des Objektes als Ordnungsbegriff zur Strukturierung von Softwaremodulen benutzt. Die Übertragung dieser Ordnung in die Welt des Ingenieurs oder Architekten zur Bezeichnung eines konkreten Elements aus einem Modell (Raum 42 aus der Menge aller Räume des Gebäudes Blumenstraße 7) kann daher nur zu begrenzten Erfolgen führen. Aus der Analyse der Widersprüchlichkeit des Objektbegriffs zwischen Softwareentwickler (Programmierer) und Softwareanwender (Ingenieur, Architekt) wird im folgenden ein Laufzeitsystem für dynamische Objektstrukturen entwickelt, das es dem Softwareentwickler erlaubt, sowohl auf die Struktur als auch auf die Ausprägung eines Modells zuzugreifen. Dem Softwareanwender können damit Werkzeuge zur Verfügung gestellt werden, die es ihm gestatten, Gebäudemodelle zu definieren. Das Laufzeitsystem enthält zum einen eine Reihe von Klassen, die es ermöglichen, die Struktur von Anwenderobjekten dynamisch zu beschreiben und zu analysieren. Eine zweite Art von Klassen erlaubt das Erzeugen und Verändern von Anwenderobjekten, die diesen Strukturen entsprechen KW - Bauwerk KW - CAD KW - Objektmodell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4555 ER - TY - CHAP A1 - Menzel, Karsten A1 - Garrett, James H. A1 - Mahdavi, A. A1 - Ries, R. T1 - Processing "fuzzy" materials sets for environmental impact analysis of buildings N2 - Processing technical and environmental data on building materials, components, and systems has become more important during the last few years. Increased sensitivity towards environmental and energy problems has lead to the demand for simulation and evaluation of the long term behavior of buildings. The results of such simulations are expected to enable architects and engineers to develop a broader, interdisciplinary understanding of the impact of their products (buildings) on the environment. However, conducting such evaluations is currently hampered by the lack of comprehensive, up-to-date, and ecologically relevant data on building materials, components, and systems. To address this problem, this paper proposes an approach to deal with the absent or uncertain attributes of building materials, components, and systems. In the past, various information systems have been developed to provide data on a limited set of building materials, including precise values pertaining to some of their characteristics, such as availability, manufacturers, costs, etc. These traditional information systems have difficulty in dealing with uncertain, incomplete and sparse data. However, uncertainty and incompleteness characterize the nature of most of the available and environmentally related characteristics of materials, components, and systems. In this paper, a fuzzy-logic-based augmentation of traditional information systems is proposed towards providing management, utilization and manipulation of incomplete and uncertain data. KW - Bauwerk KW - Umweltfaktor KW - CAD KW - Fuzzy-Logik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4500 ER - TY - CHAP A1 - Hauschild, Thomas A1 - Hübler, Reinhard T1 - Entwicklung eines verteilbaren und kooperativ nutzbaren objektorientierten CAAD-Produktmodellierkerns N2 - Der Fokus des Projektes liegt auf einer besseren Unterstützung der kooperativen Aspekte im Bauwerksentwurf und der Anwendung von ComponentWare-Techniken in der Architektur des Entwurfssystems. Es muß festgestellt werden, daß die Kooperation der Beteiligten im Entwurfsprozeß von Bauwerken durch die heute praktizierten Datenaustauschverfahren nicht oder nur unbefriedigend unterstützt wird und das keine Lösung dieses Problems durch die Weiterentwicklung von filebasierten Datenaustauschformaten zu erwarten ist. Im Rahmen des Projektes wird mit einer CORBA-Umgebung für Smalltalk-80 ein verteilbares Objektsystem realisiert. Als Architektur des Systems wurde eine hybride Herangehensweise gewählt, bei der allgemeine Informationen auf einem zentralen Server verwaltet werden und die eigentlichen Projektinformationen bei Bedarf repliziert werden. Wie allgemein in GroupWare - orientierten Systemen notwendig, müssen effektive Mechanismen der Nebenläufigkeitskontrolle und zur Sperrung bestimmter Modellbereiche realisiert werden. Wichtig ist für kooperative Entwurfssysteme die Systemunterstützung der Beseitigung der Folgen von kollidierenden Entwurfsintensionen durch die Bearbeiter. Dazu werden unter anderem Remote-Pointer-Mechanismen realisiert. In Abhängigkeit von der Rolle eines Bearbeiters werden diesem Sichten auf des Objektmodell (Partialmodelle) zugeordnet. Es werden Mechanismen zur Autorisierung des Zugriffs auf Partialmodelle implementiert, zu diesem Zweck erfolgt eine Nutzerauthentifizierung. Beziehungen zwischen Partialmodellen werden durch eine spezielle Relation im Objektsystem abgebildet. Die Konzeption des Objektsystems lehnt sich an die PREPLAN-Philosophie an. Das impliziert die Unterstützung von Entwurfshandlungen sowohl in Bottom-Up- als auch in Top-Down - Richtung. Benutzer können das Objektsystem um eigene Klassen erweitern bzw. existierende Klassen modifizieren und Attribute mit Defaultwerten belegen, um das System inkrementell mit Domänenwissen anreichern zu können. Von großer Bedeutung für kooperative Entwurfssysteme sind eine Versionsverwaltung und die Bereitstellung von Undo - und Redo - Mechanismen. Es ist möglich, multimediale Daten im Objektmodell abzulegen und diese in Abhängigkeit von ihrem Format wiederzugeben bzw. zu bearbeiten. Das beschriebene System befindet sich derzeit in der Implementierung. KW - Bauwerk KW - Architektur KW - CAD KW - Datenaustausch Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4475 ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg A1 - Schüler, H. T1 - Anwendung der mathematischen Optimierung bei der physikalisch und geometrisch nichtlinearen Analyse und Bemessung seismisch beanspruchter Tragwerke N2 - Moderne Bemessungskonzepte für seismisch beanspruchte Hochbauten, wie die Methode der Kapazitäts-bemessung, planen inelastisches Verhalten einzelner Bereiche der Konstruktion beim Entwurf bewußt ein, um so einen Teil der durch das Beben eingetragenen Energie als inelastische Formänderungsarbeit zu absorbieren. Wird bei Akzeptanz inelastischen Verhaltens eine bestimmte Belastungsintensität, die als adaptive Grenzlast oder Einspiellast bezeichnet wird, überschritten, kann es infolge zyklischer Einwirkungen zu einer unbe-grenzten Akkumulation inelastischer Deformationen kommen. Die adaptive Grenzlast stellt damit für zyklische Einwirkungen eine geeignete Kenngröße zur Bewertung der Tragwerksqualität dar, bei der neben der Sicherung des Gleichgewichts ein bestimmtes Schädigungsniveau nicht überschritten wird. Im vorliegenden Beitrag werden die Grundzüge eines Bemessungs- und Nachweiskonzeptes für seismisch beanspruchte Stahlbetontragwerke, das unter Einbeziehung der Grundprinzipe der Kapazitätsbemessung von einem einheitlichen Kriterium zur Beschreibung des Grenzzustandes der Tragfähigkeit auf der Basis der adaptive Grenzlast ausgeht, vorgestellt. Dabei ist die Abschätzung der Verformungen notwendiger Bestandteil des Nachweis- bzw. Bemessungskonzeptes. Bei Druckgliedern ist die Berücksichtigung des Einflusses der Verformungen notwendiger Bestandteil des Bemessungskonzeptes. Entsprechende Erweiterungen der Berechnungsmodelle zur Berücksichtigung des Einflusses geometrisch nichtlinearer Effekte im Sinne einer Theorie II. Ordnung werden vorgestellt. KW - Bauwerk KW - Erdbebenbelastung KW - Nichtlineares Phänomen KW - Optimierung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4421 ER - TY - CHAP A1 - Laabs, Andreas A1 - Pahl, Peter Jan T1 - Das Beobachterkonzept zum Erhalt der Konsistenz in Datenmodellen N2 - Die Aufgaben des Bauingenieurwesens sind dadurch geprägt, daß sowohl die Planung als auch die Ausführung von Bauwerken häufigen Änderungen unterliegen. Beschreibt man das Verhalten der Bauwerke und den Bauprozeß im Computer mit Modellen, so ändern sich Umfang und Struktur der Modelle als Folge der Änderung in Planung und Ausführung. Diesen Vorgang nennt man Dynamisierung des Modells. Die Dynamisierung führt zu Veränderungen und Inkonsistenzen in den Modellen der Anwendungen. Die Aktualisierung und Abstimmung von Beziehungen innerhalb eines Modells sowie die Sicherung der Konsistenz der Modelle untereinander sind daher von zentraler Bedeutung für die Lösung von Bauingenieuraufgaben. Seit den letzten 10 Jahren wird die objektorientierte Methode in der Modellierung für Anwendungen im Bauingenieurwesen intensiv entwickelt und eingesetzt. Es hat sich gezeigt, daß die Anwendung dieser Methode in wichtigen Bereichen der Modellierung zu Verbesserungen führt. Gleichzeitig hat sich aber auch herausgestellt, daß die für das Bauingenieurwesen wichtigen Aspekte der Aktualisierung und der Konsistenz nicht zweckmäßig beschreibbar sind. In diesem Beitrag wird eine einfache Modelliermethode in ihrem Konzept und ihrer Realisierung gezeigt, mit der sich die Aktualisierung von Objekten und Modellen sowie die Sicherstellung der Konsistenz in Systemen des Bauingenieurwesens bearbeiten lassen. KW - Bauwerk KW - Objektmodell KW - Datenmodell KW - Bauausführung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4310 ER - TY - CHAP A1 - Walukiewicz, Henryk T1 - Identification of Structural Models as a Problem of Group Representation Theory N2 - It has been shown that symmetries of moment functions of stochastic processes play an important role in identification of systems. They provide the group-theoretic method of choice of the model structure and model parameters. In the first stage the group-theoretic analysis of some fundamental concepts of stochastic dynamics: stochastic processes and functional series of Volterra-Wiener type has been undertaken. The analysis of group representations of the moment functions of order m for stochastic processes is the basic, original concept of the work. The following groups: symmetric Sm, special affine SAff(m), general linear GL(n, R), GL(n,C) and their subgroups play the main role in the models. In the second stage the informational entropy has been introduced as a measure of the randomness in the identified models. The group-theoretic approach underlines the unity of the nonlinear system identification and leads to useful engineering results in the range of the second-order (stochastic) theory. KW - Bauwerk KW - Modellierung KW - Gruppentheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3725 ER - TY - CHAP A1 - Romberg, Richard A1 - Treeck, Christioph van A1 - Niggl, Andreas T1 - Numerische Simulation auf Basis des IFC-Bauwerksmodells N2 - Dieser Beitrag zeigt einen Ansatz, verschiedene numerische Simulationsaufgaben auf ein gemeinsames und durchgängig dreidimensionales Geometriemodell zu gründen. Hinsichtlich der physikalischen Modelle reicht die Bandbreite der hier vorgestellten Anwendungen von einer ganzheitlichen Betrachtung der Gebäudestruktur in der Strukturmechanik über die raumbezogene, hochauflösende Modellierung konvektiver Raumluftströmungen bis hin zur Simulation des thermischen Verhaltens eines ganzen Gebäudes. Das jeweils zugrunde liegende numerische Verfahren setzt dabei auf einem stets gleichen Zwischenmodell der realen Geometrie der Struktur auf, ohne dabei vereinfachende dimensionsreduzierte Modelle anzuwenden. Nachfolgende Werkzeuge werden derzeit im Rahmen mehrerer Forschungsprojekte an dieses Geometriemodell angeschlossen: Die p-Version der FEM für die Strukturanalyse, ein sog. Mehrzonenmodell für die thermische Gebäudesimulation sowie ein auf dem sog. hybriden thermischen Gitter-Boltzmann-Verfahren (hTLBE) basierender Strömungssimulationscode. Der Import geometrischer wie semantischer Daten eines Bauwerks in das Simulations-Framework erfolgt nach dem Produktmodell der Industry Foundation Classes (IFC), das sich als Quasi-Standard für den Datenaustausch im Bauwesen etabliert hat. Das IFC-Schema dient dabei nicht als Modell zur internen Speicherung von Daten, sondern wird hier als Schnittstelle zur Anbindung unterschiedlicher Programme wie CAD-Anwendungen für Architekten oder anderen Modellierungstools verwendet. Die Implementierung dieser Schnittstelle erfolgt unter Verwendung einer sog. Toolbox, die das Objektschema der IFC auf ein Klassenmodell einer objektorientierten Programmiersprache abbildet und Werkzeuge für den effizienten Objektzugriff zur Verfügung stellt. Damit werden Grenzen zwischen spezialisierten Softwarepaketen, die maßgeschneidert auf spezielle Erfordernisse ausgerichtet sind, aufgebrochen und der Datenaustausch über die Anwendungsgrenzen hinaus unterstützt. Dies ist eine Konsequenz aus einer dem Wunsch nach vernetzt-kooperativen Planung von Bauwerken.... KW - Bauwerk KW - Dreidimensionales Modell KW - Datenaustausch Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3521 ER - TY - CHAP A1 - Petkov, Zdravko B. A1 - Christov, Christo T. T1 - Response Spectra Evaluation Including Pounding Effect N2 - Most of the existing seismic resistant design codes are based on the response spectrum theory. The influence of inelastic deformations can be evaluated by considering inelastic type of resisting force and then the inelastic spectrum is considerably different from the elastic one. Also, the influence of stiffness degradation and strength deterioration can be accounted for by including more precise models from material point of view. In some recent papers the corresponding changes in response spectra due to the P- Ä effect are discussed. The experience accumulated from the recent earthquakes indicates that structural pounding may considerably influence the response of structures and should be taken into account in design procedures. The most convenient way to do that is to predict the influence of the pounding on the response spectra for accelerations, velocities and displacements. Generally speaking the contact problems such as pounding are characterized by large extent of nonlinearity and slow convergence of the computational procedures. Thus obtaining spectra where the contact problem is accounted for seems very attractive from engineering point of view because could easy be implemented into the design procedures. However it is worth nothing that there is not rigorous mathematical proof that the original system can be decomposed into single equations related to single degree of freedom systems. It is the porpose of the paper to study the influence of the pounding on the response spectra and to evaluate the amplification due to the impact. For this purpose two adjacent SDOF systems are considered that are able to interact during the vibration process. This problem is solved versus the elastic stiffness ratio, which appears to be very important for such assemblage. The contact between masses is numerically simulated using opening gap elements as links. Comparisons between calculated response spectra and linear response spectra are made in order to derive analytical relationships to simply obtain the contribution of pounding. The results are graphically illustrated in response spectra format and the influence of the stiffness ratio is clarified. KW - Bauwerk KW - Erdbebenbelastung KW - Stochastischer Prozess Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3464 ER - TY - CHAP A1 - Nour, Mohamed A1 - Beucke, Karl T1 - Object Information Packs as a Base for Information Modelling in Construction N2 - The construction industry is suffering form the existence of isolated islands of software applications and bottle neck solutions. The idea of an integrated virtual database that consists of separated platforms, representing various disciplines, depending on the web technology is envisaged to solve the problem of integration. This paper is about the production and use of OIPs (Object Information Packs) as a part of the construction material product in the form of XML files that include all the technical and commercial data of the product, which might be needed by any discipline in its overall life cycle. This object information pack is neutral and independent of any software application. It is assumed to fit in a building product model at the IFC (resource layer). An example of brick - wall aggregation process is used to demonstrate the capability of the technology and the ability of non computer science experts to use it. KW - XML KW - Bauwerk KW - Objektmodell KW - Internet KW - IFC KW - OIP KW - Building Object Model Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3387 ER - TY - CHAP A1 - Kohler, Niklaus A1 - Bodin, Olivier T1 - Dealing with sensitivity and uncertainty analysis in integrated buildung LCA model : Dealing with Uncertainty in Life Cyle Analysis of Building Model by Using Experiment Design Methods N2 - Building design, realization, operation and refurbishment have to take into account the environmental impacts as well as the resulting costs over a long period of time. LCA methods had to be developed for buildings because of their complexity, their long life duration and through a large number of actors who are involved. This was realized by integrating life cycle analysis, life cycle costing and building product models in integrated LCA models. However the use of such models leads to difficulties. The principal ones are the uncertainty treatment in LCA models and the lack of experience of practitioners who are not LCA specialists. Answers to these problems are the management of uncertainty and the development of simplified models for building design, construction and operation. This can be achieved with the mean of experimental plans or Monte Carlo simulation. The paper will focus on how these techniques can be used, what are their possibilities and disadvantages, particularly concerning the development of simplified models. KW - Bauwerk KW - Mathematisches Modell KW - Lebensdauer KW - Unsicherheit KW - Monte-Carlo-Simulation Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3220 ER - TY - CHAP A1 - Hübner, Björn A1 - Walhorn, Elmar A1 - Kölke, Andreas T1 - Simultane Lösung gekoppelter Struktur-Fluid-Systeme T1 - A Simultaneous Solution Procedure for Fluid-Structure Interaction with Application to Civil Engineering Problems N2 - Ein simultanes Lösungsverfahren für Fluid-Struktur-Wechselwirkungen aus dem Bereich des Bauingenieurwesens wird vorgestellt. Die Modellierung der Tragwerksdynamik erfolgt mit der geometrisch nichtlinearen Elastizitätstheorie in total Lagrangescher Formulierung. Die Strömung wird mit den inkompressiblen Navier-Stokes-Gleichungen beschrieben. Wenn Turbulenzeffekte massgeblich sind, kommen die Reynolds-Gleichungen in Verbindung mit dem k-omega-Turbulenzmodell von Wilcox zum Einsatz. Zur Beschreibung von komplexen freien Oberflächen wird die Level-Set-Methode eingesetzt. Die einheitliche Diskretisierung von Fluid und Struktur mit der Raum-Zeit-Finite-Element-Methode führt zu einem konsistenten Berechnungsmodell für das gekoppelte System. Da die isoparametrischen Raum-Zeit-Elemente ihre Geometrie in Zeitrichtung ändern können, erlaubt die Methode eine natürliche Beschreibung des infolge der Strukturbewegung zeitveränderlichen Strömungsgebiets. Die gewichtete Integralformulierung der Kopplungsbedingungen mit globalen Freiwerten für die Interface-Spannungen sichert eine konservative Kopplung von Fluid und Struktur. Ausgewählte Anwendungsbeispiele zeigen die Leistungsfähigkeit der entwickelten Methodik und belegen die guten Konvergenzeigenschaften des simultanen Lösungsverfahrens. KW - Bauwerk KW - Dynamik KW - Modellierung KW - Flüssigkeit-Bauwerk-Wechselwirkung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3114 ER - TY - CHAP A1 - Hauschild, Thomas A1 - Hübler, Reinhard T1 - Techniken der Verwaltung dynamischer digitaler Bauwerksmodelle für Revitalisierungsvorhaben N2 - Modellverwaltungssysteme sind eine geeignete technologische Basis zum Management digitaler Bauwerksmodelle bei Planungstätigkeiten für den Neubau als auch für die Revitalisierung von Bauwerken. Die Unterstützung von Revitalisierungsprozessen impliziert für den Entwurf integrierter Planungsumgebungen spezifische Anforderungen wie die Repräsentation von Informationen, die mit verschiedenen Typen von Vagheit behaftet sind, die Notwendigkeit, den Soll- sowie den Ist- Zustand des Bauwerks abzubilden und die Fähigkeit des Umgangs mit temporal inkonsistenten Modellzuständen. Die erforderliche Dynamik der Domänenmodelle und die erforderliche Nutzbarkeit in Virtual Enterprises stellen weitere Ansprüche an die Realisierungsbasis der Modellverwaltungssysteme. Zur Implementierung derartiger Systeme erweist es sich als vorteilhaft, Eigenschaften objektorientierter Programmiersprachen mit nichtstatischen Typsystemen auszunutzen, da diese durch die vorhandene Metaebene sowie Introspektions- und Reflektionsmechanismen eine effiziente Realisierungsbasis bereitstellen. Zur effektiven Unterstützung synchroner kooperativer Planungstätigkeiten innerhalb einzelner Fachdisziplinen wurde ein Benachrichtigungsmechanismus realisiert, der an das Modellverwaltungssystem angekoppelte Fachapplikationen über nebenläufig vorgenommene Modifikationen am zugehörigen Domänenmodell oder an Projektinformationen informiert. Weiterhin existiert ein Mechanismus zur vereinfachten Anbindung von existierenden Applikationen, die auf statischen Partialmodellen beruhen oder standardisierte, modellbasierte Austauschformate unterstützen. Abschließend wird eine aus einem zentralen Projektserver, Domänenservern und Domänenclients bestehende hybride Systemarchitektur vorgestellt, die geeignet ist, unter den Randbedingungen kooperativer und geographisch verteilter Arbeit bei Revitalisierungsvorhaben in Virtual Enterprises eingesetzt zu werden. KW - Bauwerk KW - Datenmodell KW - Datenverwaltung KW - Digitales Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3054 ER - TY - CHAP A1 - Al Diab, Ali A1 - Henry, Eric A1 - Boulemia, Cherif T1 - A concerted and multi-criterion approach for helping to choose a Structure- Foundation system of building N2 - The research of the best building design requires a concerted design approach of both structure and foundation. Our work is an application of this approach. Our objective is also to create an interactive tool, which will be able to define, at the early design stages, the orientations of structure and foundation systems that satisfy as well as possible the client and the architect. If the concerns of these two actors are primarily technical and economical, they also wish to apprehend the environmental and social dimensions of their projects. Thus, this approach bases on alternative studies and on a multi-criterion analysis. In this paper, we present the context of our work, the problem formulation, which allows a concerted design of Structure and Foundation systems and the feasible solutions identifying process. KW - Bauwerk KW - Gründung KW - CAD KW - Entscheidung bei mehrfacher Zielsetzung KW - Early design stage KW - building KW - foundation KW - multi-criterion analysis KW - decision making Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2732 ER - TY - JOUR A1 - Fink, Thomas T1 - Structural analysis, design and detailing using standard CAD software and standard building information model N2 - This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models. KW - Bauindustrie KW - CAD KW - Bauwerk KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2702 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Alekseeva, Elena A1 - Tarlapan, Oleg T1 - Virtual Construction using Map-based Approach N2 - The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Virtuelle Realität KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2447 ER - TY - JOUR A1 - Kiviniemi, Arto A1 - Fischer, Martin T1 - Requirements Management Interface to Building Product Models N2 - In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Bauwerk KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2427 ER - TY - JOUR A1 - Willenbacher, Heiko A1 - Hübler, Reinhard T1 - Intelligent Link-Management for the Support of Integration in Building Life Cycle N2 - The processes in the life cycle of buildings are characterised by highly distinct teamwork. The integration of all the distributed working participants, by providing an environment, which especially supports the communication and collaboration between the actors, is a fundamental step to improve the efficiency of the involved processes and to reduce the total costs. In this article, a link based modelling approach and its “intelligent” link management is introduced (1). This approach realises an integration environment based on a special building model that acts as a decision support system. The link-based modelling is characterised by the definition and specialisation of links between partial models. These intelligent managed links enable a very flexible and task specific data access and exchange between all the different views and partial models of the participants. KW - Mehragentensystem KW - Lernendes System KW - Bauwerk KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2223 ER - TY - CHAP A1 - Petzold, Frank A1 - Donath, Dirk T1 - The building as a container of information : the starting point for project development and design formulation N2 - For planning in existing built contexts, the building survey is the starting point for initial planning proposals, for the diagnosis and documentation of building damages, for the creation of objectives catalogues, for the detailed design of renovation and conversion measures and for ensuring fulfilment of building legislation, particularly by change of use and refitting. An examination of currently available IT-tools shows insufficient support for planning within existing contexts, most notably a deficit with regard to information capture and administration. This paper discusses the concept for a modular surveying system (basic concept, separation of geometry from semantic data, and separation into sub-systems) and the prototypical realisation of a system for the complete support of the entire building surveying process for existing buildings. The project aims to contribute to the development of a planning system for existing buildings. ... KW - Architektur KW - Verteiltes System KW - Lebenszyklus KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1848 ER - TY - CHAP A1 - Miles, John A1 - Cen, Mei A1 - Taylor, Mark T1 - Linking Sketching and Constraint Checking for Early Conceptual Design N2 - At the start of the conceptual design process, designers start to give tangible form to their thoughts by sketching. This helps with reasoning and communicates ideas to other members of the team. Sketches are gradually worked up into more formal drawings which are then passed to the other stages of the design process. There are however some problems with basing early ideas on sketching. For example, due to their ad-hoc nature, sketches tend only to be diagrammatic representations and so designers cannot be sure that their ideas are feasible and what is being proposed meets the constraints described in the client brief. This can result in designers wasting time working up ideas which prove to be unsuitable. Also the process of constraint checking is complex and time consuming and so designers tend limit their search of possible options and instead choose satisfying rather than good solutions. This paper describes the INTEGRA project which examines the role of sketching in early conceptual design and how this can be linked to other aspects of the process and particularly automated constraint checking using an IT based approach. The focus for the work is the design of framed buildings. A multi-disciplinary approach has been adopted and the work has been undertaken in close collaboration with practising designers and clients. KW - Konzipieren KW - Bauwerk KW - Management KW - Constraintnetz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1547 ER - TY - CHAP A1 - Garrett, James H. A1 - Akinci, Burcu A1 - Wang, Hongjun T1 - Towards Domain-Oriented Semi-Automated Model Matching for Supporting Data Exchange N2 - The process of matching data represented in two different data models is a longstanding issue in the exchange of data between different software systems. While the traditional manual matching approach cannot meet today’s demands on data exchange, research shows that a fully automated generic approach for model matching is not likely, and generic semi-automated approaches are not easy to implement. In this paper, we present an approach that focuses on matching data models in a specific domain. The approach combines a basic model matching approach and a version matching approach to deduce new matching rules to enable data transfer between two evolving data models. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1324 ER - TY - CHAP A1 - Boukamp, Frank A1 - Akinci, Burcu T1 - Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications N2 - This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system. KW - Bauwerk KW - Datenmanagement KW - Modellierung KW - Norm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1315 ER - TY - CHAP A1 - Ward, Michael A1 - Thorpe, Tony A1 - Price, Andrew T1 - The Re-use of Site Data to Inform Business Processes N2 - The increased implementation of site data capture technologies invariably results in an increase in data warehousing and database technologies to store captured data. However, restricted use of data beyond the initial application could potentially result in a loss of understanding of site processes. This could in turn lead to poor decision making at production, tactical and strategic levels. Concrete usage data have been collected from two piling processes. These data have been analysed and the results highlighted potential improvements that could be made to existing site management and estimating processes. A cost benefit analysis has been used to support decision making at the strategic level where the identified improvements require capital expenditure. KW - Bauwerk KW - Datenmanagement KW - Baustelle KW - Controlling Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1308 ER - TY - CHAP A1 - Xie, Haiyan A1 - Issa, Raja A1 - O'Brien, William T1 - Structure of a Formal User Model for Construction Information Retrieval N2 - Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction. KW - Bauwerk KW - Datenmanagement KW - Benutzeroberfläche Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1296 ER - TY - CHAP A1 - Changwan, Kim A1 - Haas, Carl A1 - Caldas, Carlos T1 - Spatial data acquisition, integration, and modeling for real-time project life-cycle applications N2 - Current methods for site modeling employs expensive laser range scanners that produce dense point clouds which require hours or days of post-processing to arrive at a finished model. While these methods produce very detailed models of the scanned scene, useful for obtaining as-built drawings of existing structures, the associated computational time burden precludes the methods from being used onsite for real-time decision-making. Moreover, in many project life-cycle applications, detailed models of objects are not needed. Results of earlier research conducted by the authors demonstrated novel, highly economical methods that reduce data acquisition time and the need for computationally intensive processing. These methods enable complete local area modeling in the order of a minute, and with sufficient accuracy for applications such as advanced equipment control, simple as-built site modeling, and real-time safety monitoring for construction equipment. This paper describes a research project that is investigating novel ways of acquiring, integrating, modeling, and analyzing project site spatial data that do not rely on dense, expensive laser scanning technology and that enable scalability and robustness for real-time, field deployment. Algorithms and methods for modeling objects of simple geometric shape (geometric primitives from a limited number of range points, as well as methods provide a foundation for further development required to address more complex site situations, especially if dynamic site information (motion of personnel and equipment). Field experiments are being conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach. KW - Bauwerk KW - Datenmanagement KW - Echtzeitsystem KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1280 ER - TY - CHAP A1 - Petersen, Michael A1 - Seewald, Gerrit T1 - Establishing of fundamentals in building projects using web services N2 - During the establishing of fundamentals in a building project a huge amount of influence factors and boundary conditions have to be investigated in order to provide the prerequisites for further planning processes. These investigative tasks are often related with a great effort concerning time and money, because there are no standardized workflows and interfaces which provide an efficient access to the necessary information related to a specific construction site. Within the fundamental investigation human and natural circumstances have to be taken into account. Thus, in this project two examples have been chosen in order to demonstrate the holistic approach for an integration and provision of georeferenced information. The developed internet-site http://www.grundlagenermittlung.de has been designed to support architects and civil engineers in early planning phases of a building project efficiently. It offers web-based services based on dynamic interfaces for a flexible search and collection of information concerning the building site. Therefore, a central Metadatabase-Server for Description, Discovery and Integration has been established which enables a registration of georeferenced services and the redirection of incoming requests to other, distributed data pools. Using this Yellow-Page concept in combination with the underlying meta-data based on the ISO 19115 standard an efficient investigation of geographical and environmental information becomes possible. KW - Bauwerk KW - Datenmanagement KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1273 ER - TY - CHAP A1 - Pavlov, Alexander T1 - Data Transfer and Objects Recognition in Building Design N2 - The problem of data interoperability is now very important. The formal description of construction systems and objects must base upon the modeling for the description of construction data domain. The XML-language was selected as a basis of a universal data format, ensuring natural hierarchy of objects, flexibility, good layout and expandability. The language, developed by the author, is called Building Object Description Extensible Markup Language (bodXML). The types of all objects used by data transfer should be definite beforehand with existing methods of programming. It limits the possibilities of IT in application of new types. But the recipient software must recognize the building objects even if the kind of object is unknown at the outset. The author offers a set of main topological and geometric properties being sufficient for recognition of main three-dimensional building constructions with flat edges. The tests of artificial neuron network have shown that the recognition of a kind of the constructions represented as a set of indicated parameters happens enough confidently. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1265 ER - TY - CHAP A1 - Liu, Liang A1 - Soibelman, Lucio A1 - Wu, Jianfeng T1 - Data Fusion and Modeling for Construction Management Knowledge Discovery N2 - Advances in construction data analysis techniques have provided useful tools to discover explicit knowledge on historical databases supporting project managers’ decision making. However, in many situations, historical data are extracted and preprocessed for knowledge discovery based on time-consuming and problem-specific data preparation solutions, which often results in inefficiencies and inconsistencies. To overcome the problem, we are working on the development of a new data fusion methodology, which is designed to provide timely and consistent access to historical data for efficient and effective management knowledge discovery. The methodology is intended to be a new bridge between historical databases and data analysis techniques, which shields project managers from complex data preparation solutions, and enables them to use discovered knowledge for decision making more conveniently. This paper briefly describes the motivation, the background and the initial results of the ongoing research. KW - Bauwerk KW - Datenmanagement KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1254 ER - TY - CHAP A1 - Jianping, Zhang A1 - Tianyi, Ma A1 - Qiping, Shen T1 - Application of Data Warehouse and Data Mining in Construction Management N2 - All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1247 ER - TY - CHAP A1 - Cheung, Moe M. S. A1 - Noruziaan, Bahman A1 - Li, W. C. T1 - Data acquisition, processing and management systems for a Canadian bridge monitoring project N2 - This paper will present a number of technical aspects for one of the most elaborate instrumentation and data acquisition projects ever undertaken in Canada. Confederation Bridge, the longest bridge built over ice covered seawater has been equipped with the state of the art data acquistition devices and systems as well as data transfer networks. The Bridge has been providing a fixed surface connection between Prince Edward Island and Province of New Brunswick in Canada since its opening in 1997. The Bridge has a rather long design service life of 100 years. Because of its large size and long span length, its design is not covered by any existing codes or standards worldwide. The focus of the paper is to introduce the data acquisition, transfer, processing and management systems. The instrumentation and communications infrastructure and devices will be presented in some details along with the data processing and management systems and techniques. Teams of engineers and researchers use the collected data to verify the analysis and design assumptions and parameters as well as investigate the short-term and long-term behaviour and health of the Bridge. The collected data are also used in furthering research activities in the field of bridge engineering and in elevating our knowledge about behaviour, reliability and durability of such complex structures, their components and materials. KW - Bauwerk KW - Datenmanagement KW - Brückenbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1235 ER - TY - CHAP A1 - Ma, Zhiliang A1 - Wong, K. D. A1 - Yang, Jun T1 - An Approach to Utilizing Exchanged Documents in Construction Projects Based on Data Warehouse Technology N2 - There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept KW - Exchanged Documents KW - Managment Information System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1227 ER - TY - CHAP A1 - Both, Petra von A1 - Kohler, Niklaus A1 - Gessmann, Robin T1 - A virtual life cycle structured platform for building applications N2 - The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data. KW - Bauwerk KW - Datenmanagement KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1219 ER - TY - CHAP A1 - Schapke, Sven-Eric A1 - Scherer, Raimar J. T1 - A Four Layer Bayesian Network for Product Model Based Information Mining N2 - Business and engineering knowledge in AEC/FM is captured mainly implicitly in project and corporate document repositories. Even with the increasing integration of model-based systems with project information spaces, a large percentage of the information exchange will further on rely on isolated and rather poorly structured text documents. In this paper we propose an approach enabling the use of product model data as a primary source of engineering knowledge to support information externalisation from relevant construction documents, to provide for domain-specific information retrieval, and to help in re-organising and re-contextualising documents in accordance to the user’s discipline-specific tasks and information needs. Suggested is a retrieval and mining framework combining methods for analysing text documents, filtering product models and reasoning on Bayesian networks to explicitly represent the content of text repositories in personalisable semantic content networks. We describe the proposed basic network that can be realised on short-term using minimal product model information as well as various extensions towards a full-fledged added value integration of document-based and model-based information. KW - Bauwerk KW - Datenmanagement KW - Produktmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1207 ER - TY - CHAP A1 - O'Brien, William A1 - Danso-Amoako, Mark A1 - Issa, Raja T1 - A Case Study of IFC and CIS/2 Support for Steel Supply Chain Processes N2 - The evolution of data exchange and integration standards within the Architectural, Engineering and Construction industry is gradually making the long-held vision of computer-integratedconstruction a reality. The Industry Foundations Classes and CIMSteel Integration Standards are two such standards that have seen remarkable successes over the past few years. Despite successes, these standards support the exchange of product data more than they do process data, especially those processes that are loosely coupled with product models. This paper reports on on-going research to evaluate the adequacy of the IFC and CIS/2 standards to support process modeling in the steel supply chain. Some initial recommendations are made regarding enhancements to the data standards to better support processes. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1195 ER - TY - CHAP A1 - Parmee, Ian A1 - Abraham, Johnson T1 - User-centric Evolutionary Design Systems - the Visualisation of Emerging Multi-Objective Design Information N2 - The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers. KW - Konzipieren KW - Bauwerk KW - Künstliche Intelligenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1094 ER - TY - CHAP A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Object Oriented Finite Element Analysis for Structural Optimization using p-Elements N2 - The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed. KW - Konzipieren KW - Bauwerk KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1089 ER - TY - CHAP A1 - Peng, Jun A1 - Law, Kincho A1 - Lau, Gloria T1 - Internet-Enabled Software Model for Nonlinear Structural Analysis and Simulations N2 - This paper describes an Internet-enabled software model that could facilitate the development and utilization of nonlinear structural analysis programs. The software model allows users easy access to the analysis core program and the analysis results by using a web-browser or other application programs. In addition, new and legacy codes can be incorporated as distributed services and be integrated with the software framework from disparate sites. A distributed project management system, taking advantages of Internet and database technologies, is implemented to store and manage model information and simulation results. Nonlinear dynamic analysis and simulations of a bridge structure is performed to illustrate the facilities of the Internet-enabled software model. KW - Konzipieren KW - Bauwerk KW - Verteiltes System KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1057 ER - TY - CHAP A1 - Asayama, Shuichi A1 - Mae, Toshifumi T1 - Fractal Truss Structure and Automatic Form Generation Using Iterated Function System N2 - This paper describes a couple of new truss structures based on fractal geometry. One is the famous Sierpinski Gasket and another is a fractal triangle derived by means of applying a process forming leaves of a cedar tree using M. F. Barnsley’s contraction mapping theory. Therefore a pair of x-y coordinates of an arbitrary nodal point on the structures are generated easily if IFS(Iterated Function System) codes and a scale of them are specified. Structural members are defined similarly. Thus data for frame analysis can be generated automatically, which is significant if the objective structure has complex configuration. Next analytical results under vertical and wind loadings in Japanese Building Code are shown. Here members are assumed to be timber and to have cross section of 15cm×15cm. Finally authors conclude that geometrically new truss structures were developed and automatic data generation for frame analysis was attained using IFS. Analytical results show they contribute to saving material when compared it with King-post truss. KW - Konzipieren KW - Bauwerk KW - Fraktal Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1046 ER - TY - CHAP A1 - Wellmann Jelic, Andres A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Distributed computing of failure probabilities for structures in civil engineering N2 - In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server. KW - Konzipieren KW - Bauwerk KW - Verteiltes System KW - Fehler KW - Stochastik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1030 ER - TY - CHAP A1 - Raue, Erich A1 - Weitzmann, Rüdiger T1 - Analysis and Design of Hybrid Structures using Optimization Strategies N2 - The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes. KW - Konzipieren KW - Bauwerk KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1023 ER - TY - CHAP A1 - Bédard, Claude A1 - Mora, Rodrigo A1 - Rivard, Hugues T1 - A Framework for Computer-Aided Conceptual Design of Building Structures N2 - This paper describes a framework for computer-aided conceptual design of building structures that results from building architectural considerations. The central task that is carried out during conceptual design is the synthesis of the structural system. This paper proposes a methodology for the synthesis of structural solutions. Given the nature of architectural constraints, user-model interactivity is devised as the most suitable computer methodology for driving the structural synthesis process. Taking advantage of the hierarchical organization of the structural system, this research proposes a top-down approach for structural synthesis. Through hierarchical refinement, the approach lends itself to the synthesis of global and local structural solutions. The components required for implementing the proposed methodology are briefly described. The main components have been incorporated in a proof-of-concept prototype that is being tested and validated with actual buildings. KW - Konzipieren KW - Bauwerk KW - Software Engineering Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1018 ER - TY - THES A1 - Hauschild, Thomas T1 - Computer Supported Cooperative Work-Applikationen in der Bauwerksplanung auf Basis einer integrierten Bauwerksmodellverwaltung T1 - Computer Supported Cooperative Work Applications for the Design of Buildings based on an integrated Building Model Management N2 - Gegenstand der vorliegenden Arbeit ist die Konzeption und prototypische Umsetzung von Techniken des Computer Supported Cooperative Work (CSCW) im Rahmen einer integrierten objektorientierten und dynamischen Bauwerksmodellverwaltung zur Unterstützung der Bauwerksplanung. Die Planung von Bauwerken ist durch einen hohen Grad an Arbeitsteiligkeit, aber auch durch eine schwache Strukturierung der ablaufenden Prozesse gekennzeichnet. Besonders durch den Unikatcharakter des Planungsgegenstands \'Bauwerk\' ergeben sich signifikante Unterschiede zum Entwurf anderer, durch Serienfertigung produzierter Industriegüter. Zunehmend wird die Planung von Bauwerken in Virtual Enterprises ausgeführt, die sich durch eine dynamische Organisationsstruktur, geographische Verteilung der Partner, schwer normierbare Informationsflüsse und eine häufig stark heterogene informationstechnische Infrastruktur auszeichnen. Zur rechnerinternen Repräsent! ation des Planungsgegenstands haben sich objektorientierte Bauwerksmodelle bewährt. Aufgrund der Veränderlichkeit der Bauwerke und deren rechnerinterner Repräsentation im Laufe des Bauwerkslebenszyklus ist eine dynamische Anpassung der Modelle unumgänglich. Derartige in Form von Taxonomien dargestellte dynamische Bauwerksmodellstrukturen können gemeinsam mit den in Instanzform vorliegenden konkreten Projektinformationen in entsprechenden Modellverwaltungssystemen (MVS) gehandhabt werden. Dabei wird aufgrund der Spezialisierung und Arbeitsteilung im Planungsprozess von einer inhaltlich verknüpften Partialmodellstruktur, die räumlich verteilt sein kann, ausgegangen. Die vorgeschlagenen Methoden zur Koordinierung der Teamarbeit in der Bauwerksplanung beruhen auf der Nutzung von CSCW–Techniken für \'Gemeinsame Informationsräume\' und \'Workgroup Computing\', die im Kontext der als Integrationsbasis fungierenden Modellverwaltungssysteme umgesetzt werden. Dazu werden die zur d! ynamischen Bauwerksmodellierung erforderlichen Metaebenenfunk! tionalitäten sowie Ansätze zur Implementierung von Modellverwaltungskernen systematisiert. Ebenso werden notwendige Basistechniken für die Realisierung von MVS untersucht und eine Architektur zur rollenspezifischen Präsentation dynamischer Modellinhalte vorgestellt. Da klassische Schichtenmodelle nicht auf die Verhältnisse in Virtual Enterprises angewendet werden können, wird eine physische Systemarchitektur mit einem zentralen Projektserver, Domänenservern und Domänenclients vorgestellt. Ebenso werden Techniken zur Sicherung des autorisierten Zugriffs sowie des Dokumentencharakters beschrieben. Zur Unterstützung der asynchronen Phasen der Kooperation wird der gemeinsame Informationsraum durch Mappingtechniken zur Propagation und Notifikation von Änderungsdaten bezüglich relevanter Modellinformationen ergänzt. Zur Unterstützung synchroner Phasen werden Techniken zur Schaffung eines gemeinsamen Kontexts durch relaxierte WYSIWIS–Präsentationen auf Basis der Modellinformationen! verbunden mit Telepresence–Techniken vorgestellt. Weiterhin werden Methoden zur Sicherung der Group–Awareness für alle Kooperationsphasen betrachtet. N2 - The thesis covers the conceptual design and the prototypical realisation of Computer Supported Cooperative Work (CSCW)– techniques within the scope of an integrated, object-oriented, dynamic model management system for the support of building planning activities. The planning of buildings is characterised by a high degree of collaboration but by a weak structuring of the processes, too. Significant differences between the design of buildings and industrial goods produced by series production are implied by the uniqueness of a building. Increasingly, the planning of buildings is accomplished by Virtual Enterprises. These are characterised by a dynamic organisation structure, geographic dispersion of the involved planning experts, information flows, which are hard to standardise, and a frequently very heterogeneous information-technology infrastructure. Object oriented building models have proven to be a suitable base for! the binary representation of planning subject information. Due to the changeability of both building structures and their binary representation during the building life cycle, a dynamical adaptation of the models is indispensable. Dynamic building models, which are represented by taxonomic information, can be handled together with actual project information, which is stored in taxonomy instances within an appropriate model management system. Due to the specialisation and the division of labour in the planning process, a semantic linked but spatial distributed partial model structure is applied. The recommended methods for the coordination of teamwork in the planning process are based on the application of CSCW-techniques for \'Shared Information Spaces\' and \'Workgroup Computing\' in the context of model management systems acting as an foundation for planning information integration. The required meta level functionalities for dynamic building modelling and appropriate! implementation approaches for modelling kernels are systemat! ised. The necessary base techniques for the realisation of model management systems are explored. An architecture for the role specific presentation of dynamic model content is introduced, too. Due to the inadequacy of conventional multi-tier models for an application in Virtual Enterprises, an appropriate physical system architecture with a central project server, domain servers and domain clients is introduced. The thesis covers techniques, which ensure the authorised access to information and the authenticity of planning documents, too. For an adequate support of the asynchronous phases of collaboration, the Shared Information Space is supplied with mapping mechanisms for the propagation and user notification of changes in the relevant planning information. Synchronous collaboration can be performed by means of relaxed WYSIWIS-presentations connected with telepresence mechanisms in order to create a shared context for the planners. Furthermore, methods for the provis! ion of group-awareness for all co-operation phases are treated. KW - Computer Supported Cooperative Work KW - Groupware KW - Bauwerk KW - Modellierung KW - Virtuelles Unternehmen KW - Verteiltes System KW - Domänenmodelle KW - Kooperatives Arbeiten KW - CSCW KW - Dynamische Modellverwaltungssysteme KW - Dynamische Schemaevolution KW - Building Modelling KW - Domain Models KW - Co-operative Work KW - Dynamic Model Management Systems KW - Dynamic Schema Evolution Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040311-672 ER - TY - THES A1 - Willenbacher, Heiko T1 - Interaktive verknüpfungsbasierte Bauwerksmodellierung als Integrationsplattform für den Bauwerkslebenszyklus T1 - Interactive link-based building modelling as an integration platform for the building life cycle N2 - Den Gegenstand der Dissertation bilden die Konzeption und die exemplarische Realisierung eines verknüpfungsbasierten Bauwerksmodellierungsansatzes zur Schaffung einer integrierenden Arbeits- und Planungsumgebung für den Lebenszyklus von Bauwerken. Die Basis der Integration bildet ein deklarativ ausgerichteter Bauwerksmodellverbund bestehend aus abstrahierten, domänenspezifischen Partialmodellen. Auf Grund der de facto existierenden Dynamik im Bauwerkslebenszyklus werden sowohl der Bauwerksmodellverbund als auch die einzelnen Partialmodelle dynamisch modifizierbar konzipiert und auf Basis spezieller Modellverwaltungssysteme technisch realisiert. Die Verständigung innerhalb der vorgeschlagenen Gesamtbauwerksmodellarchitektur basiert auf anwenderspezifisch zu erstellenden Verknüpfungen zwischen den Partialmodellen und wird im Sinne einer hybriden Modellarchitektur durch eine zentrale, die Verknüpfungen verwaltende Komponente koordiniert. Zur Verwaltung und Abarbeitung der Verknüpfungen wird der Einsatz von Softwareagenten im Rahmen eines Multiagentensystems vorgeschlagen und diskutiert. N2 - The subject of this thesis is the conception and the exemplary realisation of a link-based building modelling approach for the creation of an integrating work and planning environment for the life cycle of buildings. The basis of the integration forms a declarative aligned building model compound consisting of abstract, domain-specific partial models. Due to the in fact existing dynamics in the building life cycle, both the building model compound and the individual partial models are dynamically modifiable. The communication within the suggested total building model architecture is based on specific links provided by users between the partial models. This link-based communication is co-ordinated in the sense of a hybrid model architecture by a central, the links administering component. For the administration and processing of the links, a multiagent-system is suggested. KW - Bauwerk KW - Modellierung KW - Produktlebenszyklus KW - Planungsprozess KW - Mehragentensystem KW - Partialmodelle KW - Integration KW - Bauwerkslebenszyklus KW - Dynamik KW - Verknüpfungen KW - building modelling KW - partial models KW - building life cycle KW - dynamics KW - links Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040216-328 ER - TY - CHAP A1 - Schultmann, Frank T1 - Projektplanungsmodelle und -methoden für den Rückbau von Bauwerken N2 - Vor dem Hintergrund einer sich verschärfenden Umweltgesetzgebung sowie der Erkenntnis, dass Bauabfälle sich grundsätzlich für eine Stoffkreislaufführung eignen, hat der Rückbau von Bauwerken in den letzten Jahren verstärkt an Bedeutung gewonnen. Aufgrund oftmals strenger Zeit- und Kostenvorgaben für einen Rückbau, begrenzter Verfügbarkeit von Personal und Betriebsmitteln, einer weitgehenden Unikatfertigung sowie wechselnder Standorte kommt dabei der projektorientierten Planung von Maßnahmen auf der Baustelle große Bedeutung zu. Im Rahmen des Beitrages werden Ansätze zur Modellierung und Lösung der sich hieraus ergebenden Probleme zur Planung und Optimierung von (Rück-) Bauabläufen unter Verwendung von Projektplanungsmodellen und -methoden vorgestellt. Hierbei werden neben betriebswirtschaftlichen auch umweltrelevante sowie technische Fragestellungen im Zusammenhang mit der Planung von Rückbauprojekten aufgegriffen. Eine Anwendung der Planungsansätze auf reale Gebäude zeigt, dass sich durch Kombination von Gebäuderückbau und Aufbereitungstechnik eine Qualitätsverbesserung von Recyclingbaustoffen erzielen lässt. Zur Umsetzung der hierzu erforderlichen Maßnahmen werden unter Berücksichtigung individueller abfallwirtschaftlicher Rahmenbedingungen der jeweiligen Planungsregion, gebäude- und baustellenbezogener Besonderheiten, technischer sowie kapazitiver Restriktionen Ablaufpläne für den Gebäuderückbau berechnet. Die für unterschiedliche Planungsregionen vorgenommenen Modellrechnungen weisen nach, dass sich die Demontage von Gebäuden gegenüber einem konventionellen Gebäudeabbruch unter bestimmten Rahmenbedingungen bereits wirtschaftlich vorteilhaft realisieren lässt. Abgerundet wird der Beitrag durch einen Ausblick auf Möglichkeiten einer Realisierung komplexer Bauabläufe auch unter strengen Zeitvorgaben sowie bei begrenzten Platzverhältnissen mit Hilfe fertigungssynchroner Ressourceneinsatzplanung sowie auf die Berücksichtigung von Unsicherheiten in der Planung und Ausführung von Rückbauprojekten. KW - Bauwerk KW - Demontage KW - Bauplanung KW - Bauablauf KW - Stoffkreislauf Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-162 ER -