TY - CHAP A1 - Hoffmann, Sabine A1 - Kornadt, Oliver ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - PHASENÜBERGANGSMATERIALIEN ALS PASSIVE WÄRMESPEICHER IN REVITALISIERUNGSOBJEKTEN N2 - Summer overheating in buildings is a common problem, especially in office buildings with large glazed facades, high internal loads and low thermal mass. Phase change materials (PCM) that undergo a phase transition in the temperature range of thermal comfort can add thermal mass without increasing the structural load of the building. The investigated PCM were micro-encapsulated and mixed into gypsum plaster. The experiments showed a reduction of indoor-temperature of up to 4 K when using a 3 cm layer of PCM-plaster with micro-encapsulated paraffin. The measurement results could validate a numerical model that is based on a temperature dependent function for heat capacity. Thermal building simulation showed that a 3 cm layer of PCM-plaster can help to fulfil German regulations concerning heat protection of buildings in summer for most office rooms. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29699 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Huhnt, Wolfgang A1 - Gielsdorf, F. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TOPOLOGICAL INFORMATION AS LEADING INFORMATION IN BUILDING PRODUCT MODELS N2 - Digital models of buildings are widely used in civil engineering. In these models, geometric information is used as leading information. Engineers are used to have geometric information, and, for instance, it is state of the art to specify a point by its three coordinates. However, the traditional approaches have disadvantages. Geometric information is over-determined. Thus, more geometric information is specified and stored than needed. In addition, engineers already deal with topological information. A denotation of objects in buildings is of topological nature. It has to be answered whether approaches where topological information becomes a leading role would be more efficient in civil engineering. This paper presents such an approach. Topological information is modelled independently of geometric information. It is used for denoting the objects of a building. Geometric information is associated to topological information so that geometric information “weights” a topology. The concept presented in this paper has already been used in surveying existing buildings. Experiences in the use of this concept showed that the number of geometric information that is required for a complete specification of a building could be reduced by a factor up to 100. Further research will show how this concept can be used in planning processes. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29110 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Häfner, Stefan A1 - Kessel, Marco A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MULTIPHASE B-SPLINE FINITE ELEMENTS OF VARIABLE ORDER IN THE MECHANICAL ANALYSIS OF HETEROGENEOUS SOLIDS N2 - Advanced finite elements are proposed for the mechanical analysis of heterogeneous materials. The approximation quality of these finite elements can be controlled by a variable order of B-spline shape functions. An element-based formulation is developed such that the finite element problem can iteratively be solved without storing a global stiffness matrix. This memory saving allows for an essential increase of problem size. The heterogeneous material is modelled by projection onto a uniform, orthogonal grid of elements. Conventional, strictly grid-based finite element models show severe oscillating defects in the stress solutions at material interfaces. This problem is cured by the extension to multiphase finite elements. This concept enables to define a heterogeneous material distribution within the finite element. This is possible by a variable number of integration points to each of which individual material properties can be assigned. Based on an interpolation of material properties at nodes and further smooth interpolation within the finite elements, a continuous material function is established. With both, continuous B-spline shape function and continuous material function, also the stress solution will be continuous in the domain. The inaccuracy implied by the continuous material field is by far less defective than the prior oscillating behaviour of stresses. One- and two-dimensional numerical examples are presented. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29643 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Häfner, Stefan A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - DAMAGE SIMULATION OF HETEROGENEOUS SOLIDS BY NONLOCAL FORMULATIONS ON ORTHOGONAL GRIDS N2 - The present paper is part of a comprehensive approach of grid-based modelling. This approach includes geometrical modelling by pixel or voxel models, advanced multiphase B-spline finite elements of variable order and fast iterative solver methods based on the multigrid method. So far, we have only presented these grid-based methods in connection with linear elastic analysis of heterogeneous materials. Damage simulation demands further considerations. The direct stress solution of standard bilinear finite elements is severly defective, especially along material interfaces. Besides achieving objective constitutive modelling, various nonlocal formulations are applied to improve the stress solution. Such a corrective data processing can either refer to input data in terms of Young's modulus or to the attained finite element stress solution, as well as to a combination of both. A damage-controlled sequentially linear analysis is applied in connection with an isotropic damage law. Essentially by a high resolution of the heterogeneous solid, local isotropic damage on the material subscale allows to simulate complex damage topologies such as cracks. Therefore anisotropic degradation of a material sample can be simulated. Based on an effectively secantial global stiffness the analysis is numerically stable. The iteration step size is controlled for an adequate simulation of the damage path. This requires many steps, but in the iterative solution process each new step starts with the solution of the prior step. Therefore this method is quite effective. The present paper provides an introduction of the proposed concept for a stable simulation of damage in heterogeneous solids. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29638 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Häfner, Stefan A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MULTIGRID PRECONDITIONED CONJUGATE GRADIENT METHOD IN THE MECHANICAL ANALYSIS OF HETEROGENEOUS SOLIDS N2 - A fast solver method called the multigrid preconditioned conjugate gradient method is proposed for the mechanical analysis of heterogeneous materials on the mesoscale. Even small samples of a heterogeneous material such as concrete show a complex geometry of different phases. These materials can be modelled by projection onto a uniform, orthogonal grid of elements. As one major problem the possible resolution of the concrete specimen is generally restricted due to (a) computation times and even more critical (b) memory demand. Iterative solvers can be based on a local element-based formulation while orthogonal grids consist of geometrical identical elements. The element-based formulation is short and transparent, and therefore efficient in implementation. A variation of the material properties in elements or integration points is possible. The multigrid method is a fast iterative solver method, where ideally the computational effort only increases linear with problem size. This is an optimal property which is almost reached in the implementation presented here. In fact no other method is known which scales better than linear. Therefore the multigrid method gains in importance the larger the problem becomes. But for heterogeneous models with very large ratios of Young's moduli the multigrid method considerably slows down by a constant factor. Such large ratios occur in certain heterogeneous solids, as well as in the damage analysis of solids. As solution to this problem the multigrid preconditioned conjugate gradient method is proposed. A benchmark highlights the multigrid preconditioned conjugate gradient method as the method of choice for very large ratio's of Young's modulus. A proposed modified multigrid cycle shows good results, in the application as stand-alone solver or as preconditioner. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29626 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Jahnke, Georg ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - HISTORISCHE BAUSUBSTANZ IN MECKLENBURG N2 - Mit diesen Ausführungen wird ein Beitrag zum weiteren Erhalt der historischen Bausubstanz in Mecklenburg aus der Sicht der Tragwerksanalyse geleistet. Dabei bestätigt es sich immer mehr, dass mit dem Modell der Geometrie, der Belastung und des Materials gleichberechtigte Modelle für eine wirklichkeitsnahe Einschätzung des Tragverhaltens eines Tragwerks vorliegen müssen. Es zeigt sich, dass dabei die besten Berechnungsprogramme nur die Ergebnisse liefern können, die mit den Eingabedaten zu erzielen sind. So hat sich der Forschungsschwerpunkt im Lehrgebiet Tragwerkslehre des FB Architektur an der Hochschule Wismar in den letzten Jahren auf die realistische Abbildung der Wechselwirkung zwischen der Bauaufnahme und der geometrischen Modellierung konzentriert. In diesem Bereich zeigen sich als Schwerpunkte die Wechselwirkung zwischen Schäden und Tragwerksanalyse und die Wechselwirkung zwischen der aufgenommenen Geometrie und dem geometrischen Modell für die Tragwerksanalyse. Die Fülle der aufgenommenen Daten sind dabei in der Regel mehr hinderlich als ein Segen für die Tragwerksanalyse. Hier wurde gezeigt, welche und wie viele geometrische Daten für das geometrische Modell für die Tragwerksanalyse sinnvoll sind. Da die eigene Datenaufnahme relativ viel Zeit beansprucht, wurde eine "geistige" Bauaufnahme durchgeführt. Dazu wird der historische Planungsprozess in den einzelnen Formfindungsschritten nachvollzogen und in die virtuelle Realität überführt. Mit dieser Methode ergeben sich unterschiedliche Bauzustände und es lassen sich auch mögliche Bauphasen abbilden. Die Tragwerksanalyse dieser virtuellen Realität zeigt dann mögliche Schwächen der Tragwerke und/oder die Notwendigkeit konstruktiver Veränderungen. Ein Vergleich der Ergebnisse der Tragwerksanalyse mit der Realität anhand des vorliegenden Datenbestands liefert die Grundlage für den aktuellen Handlungsbedarf. Da der Bauzustand eines Bauwerkes unter einer zeitlichen Veränderung steht, werden Methoden überprüft, die es ermöglichen, einen einmal vorgelegten Datenbestand aufzubereiten und weiter zu verwalten. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29719 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kasparek, Eva ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CONVERGENCE OF A NEW CONSISTENT FOLDED PLATE THEORY N2 - The design of challenging space structures frequently relies on the theory of folded plates. The models are composed of plane facets of which the bending and membrane stiffness are coupled along the folds. In conventional finite element analysis of faceted structures the continuity of the displacement field is enforced exclusively at the nodes. Since approximate solutions for transverse and for in-plane displacements are not members of the same function space, separation occurs in between the common nodes of adjacent elements. It is shown that the kinematic assumptions of Bernoulli are accounted for this incompatibility along the edges in facet models. A general answer to this problem involves substantial modification of plate and membrane theory, but a straight forward formulation can be derived for simply folded plates, structures, whose folds do not intersect. A broad class of faceted structures, including models of various curved shells, belong to this category and can be calculated consistently. The additional requirements to assure continuity concern the mapping of displacement derivatives on the edges. An appropriate finite facet element provides node and edge-oriented degrees of freedom, whose transformation to system degrees of freedom, depends on the geometric configuration at each node. The concept is implemented using conform triangular elements. To evaluate the new approach, the energy norm of representative structures for refined meshes is calculated. The focus is placed on the mathematical convergence towards reliable solutions obtained from finite volume models. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29724 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kimura, Atsushi A1 - Makino, Y. A1 - Maegaito, Kentaro A1 - Suzuki, Osamu ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ITERATION DYNAMICAL SYSTEMS OF DISCRETE LAPLACIANS ON THE PLANE LATTICE (II) (THE VISUAL IMPRESSIONS GIVEN BY DESIGN-PATTERNS) N2 - The present study was designed to investigate the underlying factors determining the visual impressions of design-patterns that have complex textures. Design-patterns produced by "the dynamical system defined by iterations of discrete Laplacians on the plane lattice" were adopted as stimuli because they were not only complex, but also defined mathematically. In the experiment, 21 graduate and undergraduate students sorted 102 design-patterns into several groups by visual impressions. Those 102 patterns were classified into 12 categories by the cluster analysis. The results showed that the regularity of pattern was a most efficient factor for determining visual impressions of design-pattern, and there were some correspondence between visual impressions and mathematical variables of design-pattern. Especially, the visual impressions were influenced greatly by the neighborhood, and less influenced by steps of iterations. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29731 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kisil, Vladimir ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - FILLMORE–SPRINGER–CNOPS CONSTRUCTION IMPLEMENTED IN GINAC N2 - This is an implementation of the Fillmore–Springer–Cnops construction (FSCc) based on the Clifford algebra capacities of the GiNaC computer algebra system. FSCc linearises the linear-fraction action of the Mobius group. This turns to be very useful in several theoretical and applied fields including engineering. The core of this realisation of FSCc is done for an arbitrary dimension, while a subclass for two dimensional cycles add some 2D-specific routines including a visualisation to PostScript files through the MetaPost or Asymptote software. This library is a backbone of many result published in, which serve as illustrations of its usage. It can be ported (with various level of required changes) to other CAS with Clifford algebras capabilities. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29744 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Klauer, Thomas ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MOBILE FACILITY MANAGEMENT ZUR INSPEKTION UND INSTANDHALTUNG VON INGENIEURBAUWERKEN N2 - In diesem Beitrag wird eine mobile Software-Komponente zur Vor-Ort-Unterstützung von Bauwerksprüfungen gemäß DIN 1076 „Ingenieurbauwerke im Zuge von Strassen und Wegen, Überwachung und Prüfung“ vorgestellt, welche sich im praktischen Einsatz bei der Hochbahn AG Hamburg befindet. Mit Hilfe dieses Werkzeugs kann die Aktivität am Bauwerk in den gesamten softwaregestützten Geschäftsprozess der auwerksinstandhaltung integriert und somit die Bearbeitungszeit einer Bauwerksprüfung von der Vorbereitung bis zur Prüfbericht-Erstellung reduziert werden. Die Technologie des Mobile Computing wird unter Berücksichtigung spezieller fachlicher Randbedingungen, wie z.B. dem Einsatzort unter freiem Himmel, erläutert und es werden Methoden zur effizienten Datenerfassung mit Stift und Sprache vorgestellt und bewertet. Ferner wird die Einschränkung der Hardware durch die geringere Größe der Endgeräte, die sich durch die Bedingung der Mobilität ergibt, untersucht. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29759 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Klawitter, Arne A1 - Ostrowski, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTEGRATED RAINFALL RUNOFF MODELLING IN SMALL URBANIZED CATCHMENTS N2 - A concept for integrated modeling of urban and rural hydrology is introduced. The concept allows for simulations on the catchment scale as well as on the local scale. It is based on a 2-layer-approach which facilitates the parallel coupling of a catchment hydrology model with an urban hydrology model, considering the interactions between the two systems. The concept has been implemented in a computer model combining a grid based distributed hydrological catchment model and a hydrological urban stormwater model based on elementary units. The combined model provides a flexible solution for time and spatial scale integration and offers to calculate separate water balances for urban and rural hydrology. Furthermore, it is GIS-based which allows for easy and accurate geo-referencing of urban overflow structures, which are considered as points of interactions between the two hydrologic systems. Due to the two-layer-approach, programs of measures can be incorporated in each system separately. The capabilities of the combined model have been tested on a hypothetical test case and a real world application. It could be shown that the model is capable of accurately quantifying the effects of urbanization in a catchment. The affects of urbanization can be analyzed at the catchment outlet, but can also be traced back to its origins, due to the geo-referencing of urban overflow structures. This is a mayor advantage over conventional hydrological catchment models for the analysis of land use changes. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29767 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Klingert, Maik ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - THE USAGE OF IMAGE PROCESSING METHODS FOR INTERPRETATION OF THERMOGRAPHY DATA N2 - For assessment of old buildings, thermal graphic analysis aided with infra-red camera have been employed in a wide range nowadays. Image processing and evaluation can be economically practicable only if the image evaluation can also be automated to the largest extend. For that reason methods of computer vision are presented in this paper to evaluate thermal images. To detect typical thermal image elements, such as thermal bridges and lintels in thermal images respectively gray value images, methods of digital image processing have been applied, of which numerical procedures are available to transform, modify and encode images. At the same time, image processing can be regarded as a multi-stage process. In order to be able to accomplish the process of image analysis from image formation through perfecting and segmentation to categorization, appropriate functions must be implemented. For this purpose, different measuring procedures and methods for automated detection and evaluation have been tested. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29777 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Knauer, Uwe A1 - Dammeier, T. A1 - Meffert, Beate ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - THE STRUCTURE OF ROAD TRAFFIC SCENES AS REVEALED BY UNSUPERVISED ANALYSIS OF THE TIME AVERAGED OPTICAL FLOW N2 - The Lucas-Kanade tracker has proven to be an efficient and accurate method for calculation of the optical flow. However, this algorithm can reliably track only suitable image features like corners and edges. Therefore, the optical flow can only be calculated for a few points in each image, resulting in sparse optical flow fields. Accumulation of these vectors over time is a suitable method to retrieve a dense motion vector field. However, the accumulation process limits application of the proposed method to fixed camera setups. Here, a histogram based approach is favored to allow more than a single typical flow vector per pixel. The resulting vector field can be used to detect roads and prescribed driving directions which constrain object movements. The motion structure can be modeled as a graph. The nodes represent entry and exit points for road users as well as crossings, while the edges represent typical paths. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29780 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Knyziak, Piotr ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS N2 - This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29792 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Krasnov, Yakov ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES N2 - Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29822 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kraußhar, Rolf Sören A1 - Constales, Denis A1 - Gürlebeck, Klaus A1 - Sprößig, Wolfgang ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPLICATIONS OF QUATERNIONIC ANALYSIS IN ENGINEERING N2 - The quaternionic operator calculus can be applied very elegantly to solve many important boundary value problems arising in fluid dynamics and electrodynamics in an analytic way. In order to set up fully explicit solutions. In order to apply the quaternionic operator calculus to solve these types of boundary value problems fully explicitly, one has to evaluate two types of integral operators: the Teodorescu operator and the quaternionic Bergman projector. While the integral kernel of the Teodorescu transform is universal for all domains, the kernel function of the Bergman projector, called the Bergman kernel, depends on the geometry of the domain. Recently the theory of quaternionic holomorphic multiperiodic functions and automorphic forms provided new impulses to set up explicit representation formulas for large classes of hyperbolic polyhedron type domains. These include block shaped domains, wedge shaped domains (with or without additional rectangular restrictions) and circular symmetric finite and infinite cylinders as particular subcases. In this talk we want to give an overview over the recent developments in this direction. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29128 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Kravchenko, Vladislav ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NEW APPLICATIONS OF PSEUDOANALYTIC FUNCTION THEORY N2 - We show a close relation between the Schrödinger equation and the conductivity equation to a Vekua equation of a special form. Under quite general conditions we propose an algorithm for explicit construction of pseudoanalytic positive formal powers for the Vekua equation that as a consequence gives us a complete system of solutions for the Schrödinger and the conductivity equations. Besides the construction of complete systems of exact solutions for the above mentioned second order equations and the Dirac equation, we discuss some other applications of pseudoanalytic function theory. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29835 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - König, Markus T1 - Workflow-Management in der Baupraxis KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8500 ER - TY - CHAP A1 - König, Markus A1 - Lang, H. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANWENDUNG DES CASE-BASED REASONING BEI DER ERMITTLUNG VON VARIANTEN FüR DEN OBERBAU VON VERKEHRSFLÄCHEN N2 - Für die Ausführung des Oberbaus von Verkehrsflächen existiert in Abhängigkeit von projektspezifischen Voraussetzungen eine Vielzahl von verschiedenen Varianten. Aufgrund von Erfahrungen der Projektplaner werden bei ähnlichen Voraussetzungen häufig gleichartige Ausführungsvarianten gewählt. Um eine mögliche Lösungsvariante für den Straßenoberbau zu erhalten, sollten daher nicht nur die gesetzlichen Richtlinien sondern auch bereits beendete Projekte berücksichtigt werden. Im Rahmen eines Wissenschaftlichen Kollegs an der Bauhaus-Universität Weimar wurde die Anwendung des Case-Based Reasoning für die Auswahl von Ausführungsvarianten für den Straßenoberbau untersucht. In diesem Beitrag werden die grundlegenden Konzepte des Case-Based Reasoning und die Bestimmung von ähnlichen Varianten anhand einfacher Beispiele aus dem Straßenoberbau dargestellt. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29808 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - König, Markus A1 - Tauscher, Eike ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - BERECHNUNG VON BAUABLÄUFEN MIT VERSCHIEDENEN AUSFÜHRUNGSVARIANTEN N2 - Prozesse im Bauingenieurwesen sind komplex und beinhalten eine große Anzahl verschiedener Aufgaben mit vielen logischen Abhängigkeiten. Basierend auf diesen projektspezifischen Abhängigkeiten wird gewöhnlich ein Bauablaufplan manuell erstellt. In der Regel existieren mehrere Varianten und somit alternative Bauabläufe um ein Projekt zu realisieren. Welche dieser Ausführungsvarianten zur praktischen Anwendung kommt, wird durch den jeweiligen Projektmanager bestimmt. Falls Ä;nderungen oder Störungen während des Bauablaufs auftreten, müssen die davon betroffenen Aufgaben und Abläufe per Hand modifiziert und alternative Aufgaben sowie Abläufe stattdessen ausgeführt werden. Diese Vorgehensweise ist oft sehr aufwändig und teuer. Aktuelle Forschungsansätze beschäftigen sich mit der automatischen Generierung von Bauabläufen. Grundlage sind dabei Aufgaben mit ihren erforderlichen Voraussetzungen und erzeugten Ergebnissen. Im Rahmen dieses Beitrags wird eine Methodik vorgestellt, um Bauabläufe mit Ausführungsvarianten in Form von Workflow-Netzen zu jeder Zeit berechnen zu können. Die vorgestellte Methode wird anhand eines Beispiels aus dem Straßenbau schematisch dargestellt. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29816 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Köppel, Bernd T1 - Nachtragsjägerei und Akquisition, eine unmögliche Symbiose? KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8459 ER - TY - CHAP A1 - Lehner, Karlheinz A1 - Hartmann, Dietrich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - USING INTERVAL ANALYSIS FOR STRUCTURAL ENGINEERING PROBLEMS N2 - Interval analysis extends the concept of computing with real numbers to computing with real intervals. As a consequence, some interesting properties appear, such as the delivery of guaranteed results or confirmed global values. The former property is given in the sense that unknown numerical values are in known to lie in a computed interval. The latter property states that the global minimum value, for example, of a given function is also known to be contained in a interval (or a finite set of intervals). Depending upon the amount computation effort invested in the calculation, we can often find tight bounds on these enclosing intervals. The downside of interval analysis, however, is the mathematically correct, but often very pessimistic size of the interval result. This is in particularly due to the so-called dependency effect, where a single variable is used multiple times in one calculation. Applying interval analysis to structural analysis problems, the dependency has a great influence on the quality of numerical results. In this paper, a brief background of interval analysis is presented and shown how it can be applied to the solution of structural analysis problems. A discussion of possible improvements as well as an outlook to parallel computing is also given. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29844 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Lourens, Eliz-Mari A1 - van Rooyen, G.C. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - Automating Preliminary Column Force Calculations In Multy-Storey Buildings N2 - In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29864 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Luther, Torsten A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INVESTIGATION OF CRACK GROWTH IN POLYCRYSTALLINE MESOSTRUCTURES N2 - The design and application of high performance materials demands extensive knowledge of the materials damage behavior, which significantly depends on the meso- and microstructural complexity. Numerical simulations of crack growth on multiple length scales are promising tools to understand the damage phenomena in complex materials. In polycrystalline materials it has been observed that the grain boundary decohesion is one important mechanism that leads to micro crack initiation. Following this observation the paper presents a polycrystal mesoscale model consisting of grains with orthotropic material behavior and cohesive interfaces along grain boundaries, which is able to reproduce the crack initiation and propagation along grain boundaries in polycrystalline materials. With respect to the importance of modeling the geometry of the grain structure an advanced Voronoi algorithm is proposed to generate realistic polycrystalline material structures based on measured grain size distribution. The polycrystal model is applied to investigate the crack initiation and propagation in statically loaded representative volume elements of aluminum on the mesoscale without the necessity of initial damage definition. Future research work is planned to include the mesoscale model into a multiscale model for the damage analysis in polycrystalline materials. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29886 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Lömker, Thorsten Michael ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SOLVING REVITALIZATION-PROBLEMS BY THE USE OF A CONSTRAINT PROGRAMING LANGUAGE N2 - This research focuses on an approach to describe principles in architectural layout planning within the domain of revitalization. With the aid of mathematical rules, which are executed by a computer, solutions to design problems are generated. Provided that "design" is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems in architectural layout planning. To avoid conflicts relating to theoretical subtleness, a customary approach adopted from Operations Research has been chosen in this work. In this approach, design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm in order to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search is executed by the use of a constraint programming language. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29874 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Malonek, Helmuth Robert A1 - Falcão, M. Irene A1 - Silva, António ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MAPLE TOOLS FOR MODIFIED QUATERNIONIC ANALYSIS N2 - At the 16th IKM Bock, Falcão and Gürlebeck presented examples of the application of some specially developed Maple-Software in hypercomplex analysis. Other papers of those authors continued this work and showed the efficiency of such tools for concrete numerical calculations as well as for numerical experiments, supporting the detection of new relationships and even theorems in a highly technical theoretical work. The mentioned software has been developed mainly for the use on mapping problems in the Euclidean spaces of dimension 3 and 4 by means of Bergman kernel methods (BKM), which are related to monogenic functions as solutions of generalized Cauchy-Riemann equations with respect to the Euclidean metric (Riesz system). The developed procedures concerning generalized powers of totally regular variables and the corresponding homogeneous polynomials basically rely on results and conventions introduced in the paper "Power series representation for monogenic functions in Rm+1 based on a permutational product", Complex Variables, 15, No.3, 181-191 (1990) by H. Malonek. Since 1992 H. Leutwiler, S. L. Eriksson and others developed in a number of papers a modified Clifford analysis and, particularly, a modified quaternionic analysis. The modification mainly consists in considering generalized Cauchy-Riemann equations with respect to a hyperbolic metric in a half space. The aim of this contribution is to show how through a change of the basic combinatorial relations used in the modified quaternionic analysis the aforementioned Maple-software (that has been recently published on CD-Rom as integrated part of the text book "Funktionentheorie in der Ebene und im Raum" by K. Gürlebeck, K. Habetha, and W. Sprössig, in the series "Grundstudium Mathematik" of Birkhäuser Verlag, 2006) can directly be used for numerical calculations in the modified theory. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29535 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Markwardt, Klaus ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - WAVELET ANALYSIS AND FREQUENCY BAND DECOMPOSITIONS N2 - In many applications such as parameter identification of oscillating systems in civil enginee-ring, speech processing, image processing and others we are interested in the frequency con-tent of a signal locally in time. As a start wavelet analysis provides a time-scale decomposition of signals, but this wavelet transform can be connected with an appropriate time-frequency decomposition. For instance in Matlab are defined pseudo-frequencies of wavelet scales as frequency centers of the corresponding bands. This frequency bands overlap more or less which depends on the choice of the biorthogonal wavelet system. Such a definition of frequency center is possible and useful, because different frequencies predominate at different dyadic scales of a wavelet decomposition or rather at different nodes of a wavelet packet decomposition tree. The goal of this work is to offer better algorithms for characterising frequency band behaviour and for calculating frequency centers of orthogonal and biorthogonal wavelet systems. This will be done with some product formulas in frequency domain. Now the connecting procedu-res are more analytical based, better connected with wavelet theory and more assessable. This procedures doesn’t need any time approximation of the wavelet and scaling functions. The method only works in the case of biorthogonal wavelet systems, where scaling functions and wavelets are defined over discrete filters. But this is the practically essential case, because it is connected with fast algorithms (FWT, Mallat Algorithm). At the end corresponding to the wavelet transform some closed formulas of pure oscillations are given. They can generally used to compare the application of different wavelets in the FWT regarding it’s frequency behaviour. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29895 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Meis, Jochen ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SERVICE DESIGN AND SERVICE MANAGEMENT WITH THE SERVICE BLUEPRINTING METHODOLOGY N2 - A new application of software technology is the application area of smart living or sustainable living. Within this area application platforms are designed and realized with the goal to support value added services. In this context value added services integrates microelectronics, home automation and services to enhance the attractiveness of flats, homes and buildings. Especially real estate companies or service providers dealing with home services are interested in an effective design and management of their services. Service Engineering is the approved approach for designing customer oriented service processes. Service engineering consists of several phases; from situation analysis to service creation and service design to service management. This article will describe how the method service blueprint can be used to design service processes. Smart living includes all actions to enlarge a flat to a smart home for living. One special requirement of this application domain is the use of local components (actuators, sensors) within service processes. This article will show how this extended method supports service providers to improve the quality of customer oriented service processes and the derivation of needed interfaces of involved actors. For the civil engineering process it will be possible to derive needed information from a built in home automation system. The aim is to show, how to get needed smart local components to fullfill later offered it-supported value added services. Value added services focused on inhabitants are grouped to consulting and information, care and supervision, leisure time activities, repairs, mobility and delivery, safety and security, supply and disposal. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29908 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Melnikov, B. E. A1 - Semenov, Artem ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MULTILEVEL COMPUTATION IN CIVIL ENGINEERING BASED ON MULTIMODEL ELASTO-PLASTIC ANALYSIS N2 - Requires for reliability and durability of structures and their elements with simultaneous material economy have stimulated improvement of constitutive equations for description of elasto-plastic deformation processes. This has led to the development of phenomenological modelling of complex phenomena of irreversible deformation including history-dependent and rate-dependent effects. During the last several decades many works have been devoted to the development of elasto-plastic models, in order to better predict the material behavior under combined variable thermo-mechanical loading. The increase of accuracy of stress analysis and safety factors for complex structures with the help of modern finite-element packages (ABAQUS, ANSYS, COSMOS, LS-DYNA, MSC.MARC, MSC.NASTRAN, PERMAS and other) can be provided only by use of complex and special variants of plasticity theories, which are adequate for the considered loading conditions and based on authentic information about properties of materials. The areas of application of the various theories (models) are as a rule unknown to the users of finite-element packages at the existing variety loading condition sin machine-building designs. At the moment a universal theory of inelasticity is absent and even the most accomplished theories can not guarantee adequate description of deformation processes for arbitrary structure under wide range of loading programs. The classifier of materials, loading conditions, effects (phenomena) and list of basic experiments are developed by the authors. Use of these classifiers for an establishment of hierarchy of models is a first step for introduction of the multimodel analysis into computational practice. The set of the classic and modern inelasticity theories is considered, so that they are applicable for stress analysis of structures under complex loading programs. Among them there are plastic flow theories with linear and nonlinear isotropic and kinematic hardening, multisurface theories, endochronic theory, holonomic theory, rheologic models, theory of elasto-plastic processes, slip theory, physical theories (single crystal and polycrystalline models) and others. The classification of materials provides rearranging by a degree of homogeneous, chemical composition, level of strength and plasticity, behavior under cyclic loading, anisotropy of properties at initial condition, anisotropy of properties during deformation process, structural stability. The classification of loading conditions takes into consideration proportional and non-proportional loading, temperature range, combination of cyclic and monotonous loading, one-axial, two-axial and complex stress state, curvature of strain path, presence of stress concentrators and level of strain gradient. A unified general form of constitutive equations is presented for all used material models based upon the concept of internal state variables. The wide range of mentioned above inelastic material models has been implemented into finite element program PANTOCRATOR developed by authors (see for details www.pantocrator.narod.ru). Application possibility of different material models is considered both for material element and for complex structures subjected to complex non-proportional loading. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29911 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Misyura, E. A1 - Volkova, Viktorija ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE N2 - The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30313 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE RESPONSE SURFACE APPROACH USING ARTIFICIAL NEURAL NETWORKS AND MOVING LEAST SQUARES N2 - In engineering science the modeling and numerical analysis of complex systems and relations plays an important role. In order to realize such an investigation, for example a stochastic analysis, in a reasonable computational time, approximation procedure have been developed. A very famous approach is the response surface method, where the relation between input and output quantities is represented for example by global polynomials or local interpolation schemes as Moving Least Squares (MLS). In recent years artificial neural networks (ANN) have been applied as well for such purposes. Recently an adaptive response surface approach for reliability analyses was proposed, which is very efficient concerning the number of expensive limit state function evaluations. Due to the applied simplex interpolation the procedure is limited to small dimensions. In this paper this approach is extended for larger dimensions using combined ANN and MLS response surfaces for evaluating the adaptation criterion with only one set of joined limit state points. As adaptation criterion a combination by using the maximum difference in the conditional probabilities of failure and the maximum difference in the approximated radii is applied. Compared to response surfaces on directional samples or to plain directional sampling the failure probability can be estimated with a much smaller number of limit state points. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29922 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian A1 - Macke, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - A NATURAL NEIGHBOR BASED MOVING LEAST SQUARES APPROACH WITH INTERPOLATING WEIGHTING FUNCTION N2 - The Element-free Galerkin Method has become a very popular tool for the simulation of mechanical problems with moving boundaries. The internally applied Moving Least Squares approximation uses in general Gaussian or cubic weighting functions and has compact support. Due to the approximative character of this method the obtained shape functions do not fulfill the interpolation condition, which causes additional numerical effort for the imposition of the essential boundary conditions. The application of a singular weighting function, which leads to singular coefficient matrices at the nodes, can solve this problem, but requires a very careful placement of the integration points. Special procedures for the handling of such singular matrices were proposed in literature, which require additional numerical effort. In this paper a non-singular weighting function is presented, which leads to an exact fulfillment of the interpolation condition. This weighting function leads to regular values of the weights and the coefficient matrices in the whole interpolation domain even at the nodes. Furthermore this function gives much more stable results for varying size of the influence radius and for strongly distorted nodal arrangements than classical weighting function types. Nevertheless, for practical applications the results are similar as these obtained with the regularized weighting type presented by the authors in previous publications. Finally a new concept will be presented, which enables an efficient analysis of systems with strongly varying node density. In this concept the nodal influence domains are adapted depending on the nodal configuration by interpolating the influence radius for each direction from the distances to the natural neighbor nodes. This approach requires a Voronoi diagram of the domain, which is available in this study since Delaunay triangles are used as integration background cells. In the numerical examples it will be shown, that this method leads to a more uniform and reduced number of influencing nodes for systems with varying node density than the classical circular influence domains, which means that the small additional numerical effort for interpolating the influence radius leads to remarkable reduction of the total numerical cost in a linear analysis while obtaining similar results. For nonlinear calculations this advantage would be even more significant. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29943 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Most, Thomas A1 - Eckardt, Stefan A1 - Schrader, Kai A1 - Deckner, T. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AN IMPROVED COHESIVE CRACK MODEL FOR COMBINED CRACK OPENING AND SLIDING UNDER CYCLIC LOADING N2 - The modeling of crack propagation in plain and reinforced concrete structures is still a field for many researchers. If a macroscopic description of the cohesive cracking process of concrete is applied, generally the Fictitious Crack Model is utilized, where a force transmission over micro cracks is assumed. In the most applications of this concept the cohesive model represents the relation between the normal crack opening and the normal stress, which is mostly defined as an exponential softening function, independently from the shear stresses in tangential direction. The cohesive forces are then calculated only from the normal stresses. By Carol et al. 1997 an improved model was developed using a coupled relation between the normal and shear damage based on an elasto-plastic constitutive formulation. This model is based on a hyperbolic yield surface depending on the normal and the shear stresses and on the tensile and shear strength. This model also represents the effect of shear traction induced crack opening. Due to the elasto-plastic formulation, where the inelastic crack opening is represented by plastic strains, this model is limited for applications with monotonic loading. In order to enable the application for cases with un- and reloading the existing model is extended in this study using a combined plastic-damage formulation, which enables the modeling of crack opening and crack closure. Furthermore the corresponding algorithmic implementation using a return mapping approach is presented and the model is verified by means of several numerical examples. Finally an investigation concerning the identification of the model parameters by means of neural networks is presented. In this analysis an inverse approximation of the model parameters is performed by using a given set of points of the load displacement curves as input values and the model parameters as output terms. It will be shown, that the elasto-plastic model parameters could be identified well with this approach, but require a huge number of simulations. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29933 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Muschalla, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - OPTIMIZATION OF WATER RESOURCES SYSTEMS USING MULTI-OBJECTIVE EVOLUTION STRATEGIES N2 - This paper deals with the development of a new multi-objective evolution strategy in combination with an integrated pollution-load and water-quality model. The optimization algorithm combines the advantages of the Non-Dominated Sorting Genetic Algorithm and Self-Adaptive Evolution Strategies. The identification of a good spread of solutions on the pareto-optimum front and the optimization of a large number of decision variables equally demands numerous simulation runs. In addition, statements with regard to the frequency of critical concentrations and peak discharges require continuous long-term simulations. Therefore, a fast operating integrated simulation model is needed providing the required precision of the results. For this purpose, a hydrological deterministic pollution-load model has been coupled with a river water-quality and a rainfall-runoff model. Wastewater treatment plants are simulated in a simplified way. The functionality of the optimization and simulation tool has been validated by analyzing a real catchment area including sewer system, WWTP, water body and natural river basin. For the optimization/rehabilitation of the urban drainage system, both innovative and approved measures have been examined and used as decision variables. As objective functions, investment costs and river water quality criteria have been used. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29953 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Musial, Michal A1 - Ubysz, Andrzej A1 - Ulatowski, Piotr ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - METHOD OF CALCULATION OF INTERNAL FORCES REDISTRIBUTION AND DISLOCATIONS IN REINFORCED CONCRETE BEAMS N2 - The paper is a proposal of calculation of internal forces and dislocations in the reinforced concrete beams before and after cracking. For the ideally elastic bars transfer matrix proposed by Rakowski was applied. The effects associated with cracking were introduced by means of the Borcz's theory in the spectrally way. Numerical example was shown. The presented attitude also enables to calculate dynamic problems and those connected with the stability of the compressed and bending cracked beams and columns. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29965 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Ostrowski, M. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTEGRATED MATHEMATICAL MODELLING AS A BASIS FOR DECISION MAKING IN WATER MANAGEMENT N2 - Water resources development and management is a complex problem. It includes the design and operation of single system components, often as part of larger interrelated systems and usually on the basis of river basins. While several decades ago the dominant objective was the maximization of economic benefit, other objectives have evolved as part of the sustainable development envisaged. Today, planning and operation of larger water resources systems is practically impossible without adequate computer tools, normally being one or several models, increasingly combined with data bank management systems and multi criteria assessment procedures in decision support systems. The use of models in civil engineering already has a long history when structural engineering is considered. These design support models, however, must rather be seen as expert systems made to support the engineer with his daily work. They often have no direct link to stakeholders and the decision makers community. The scale of investigation is often much larger in water resources engineering than in structural engineering which is related to different stakeholders and decision making procedures. Still, several similarities are obvious which can be summarized as the search for a compromise solution on a complex, i.e. multiobjective and interdisciplinary decision problem. While in structural engineering e.g. aestetics, stability and energy consumption might be important evaluation criteria in addition to construction and maintenance cost other or additional criteria have to be considered in water resources planning such as political, environmental and social criteria. In this respect civil engineers tend to overemphasize technical criteria. For the future the existing expert systems should be embedded into an improved decision support shell, keeping in mind that decision makers are hardly interested in numerical modelling results. The paper will introduce into the problem and demonstrate the state of the art by means of an example. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29979 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Paolucci, Anna Maria A1 - Venturino, Ezio ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NONLINEAR DYNAMICS AND WAVELETS IN DISCRETE BIOMATHEMATICAL MODELS N2 - A discrete ecoepidemiological model is considered. Its dynamics is studied by using wavelet decomposition. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29984 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Perepelitsa, V. A. A1 - Tebueva, F.B. A1 - Shenkao, Timour ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SOLVABILITY EXPLORATION OF SEGMENTATION PROBLEM WITH LINEAR CONVOLUTION ALGORITHMS N2 - The paper is dedicated to decidability exploration of market segmentation problem with the help of linear convolution algorithms. Mathematical formulation of this problem represents interval task of bipartite graph cover by stars. Vertices of the first partition correspond to types of commodities, vertices of the second – to customers groups. Appropriate method is offered for interval problem reduction to two-criterion task that has one implemented linear convolution algorithm. Unsolvability with the help of linear convolution algorithm of multicriterion, and consequently interval, market segmentation problem is proved. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29999 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Petrova, Lyllia B. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - STATIC ANALYSIS ON MODELS OF CONTINUOUS ORTHOTROPIC THIN-WALLED PRISMATIC SHELL STRUCTURES N2 - The paper presents a linear static analysis on continuous orthotropic thin-walled shell structures simply supported at the transverse ends with a random deformable contour of the cross section. The external loads can be random as well. The class of this structures involves most of the bridges, scaffold bridges, some roof structures etc. A numerical example of steel continuous structures on five spans with an open contour of the cross-section has been solved. The examination of the structure has used the following two computation models: a prismatic structure consisting of isotropic strips, a plates and ribs, with considering their real interaction, and a smooth orthotropic plate equivalent to the structure in the first model. The displacements and forces of the structure characterizing its stressed and deformed condition have been determined. The results obtained from the two solutions have been analyzed. The study on the structure is made with the force method in combination with the analytical finite strip method (AFSM) in displacements. The basic system is obtained by separating the superstructure from the understructure at the places of intermediate supports and consists of two parts. The first part is a single span thin-walled prismatic shell structure; the second part presents supports (columns, space frames etc.). The connection between the superstructure and intermediate supports is made under random supporting conditions. The forces at the supporting points in the direction of the connections removed are assumed to be the basic unknowns of the force method. The solution of the superstructure has been accomplished by the AFSM in displacements. The structure is divided in only one (transverse) direction into a finite number of plain strips connected to each other in longitudinal linear nodes. The three displacements of the points on the node lines and the rotation around those lines have been assumed to be the basic unknown in each node. The boundary conditions of each strip of the basic system correspond to the simply support along the transverse ends and the restraint along the longitudinal ones. The particular strip of the basic system has been solved by the method of the single trigonometric series. The method is reduced to solving a discrete structure in displacements and restoring its continuity at the places of the sections made in respect to both the displacements and forces. The two parts of the basic system have been solved in sequence under the action of single values of each of the basic unknowns and with the external load. The solution of the support part is accomplished using software for analyzing structures by the FEM. The basic unknown forces have been determined from system of canonic equations, the conditions of the deformations continuity on the places of the removed connections under superstructure and intermediate supports. The final displacements and forces at a random point of a continuous superstructure have been determined using the principle of superposition. The computations have been carried by software developed with Visual Fortran version 5.0 for PC. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30007 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Pham, Hoang Anh ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ADAPTIVE EXCITATION FOR SELECTIVE SENSITIVITY-BASED STRUCTURAL IDENTIFICATION N2 - Major problems of applying selective sensitivity to system identification are requirement of precise knowledge about the system parameters and realization of the required system of forces. This work presents a procedure which is able to deriving selectively sensitive excitation by iterative experiments. The first step is to determine the selectively sensitive displacement and selectively sensitive force patterns. These values are obtained by introducing the prior information of system parameters into an optimization which minimizes the sensitivities of the structure response with respect to the unselected parameters while keeping the sensitivities with respect to the selected parameters as a constant. In a second step the force pattern is used to derive dynamic loads on the tested structure and measurements are carried out. An automatic control ensures the required excitation forces. In a third step, measured outputs are employed to update the prior information. The strategy is to minimize the difference between a predicted displacement response, formulated as function of the unknown parameters and the measured displacements, and the selectively sensitive displacement calculated in the first step. With the updated values of the parameters a re-analysis of selective sensitivity is performed and the experiment is repeated until the displacement response of the model and the actual structure are conformed. As an illustration a simply supported beam made of steel, vibrated by harmonic excitation is investigated, thereby demonstrating that the adaptive excitation can be obtained efficiently. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30015 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Raue, Erich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NICHTLINEARE ANALYSE VON VERBUNDQUERSCHNITTEN - EIN NEUER ALTERNATIVER WEG N2 - A new approach to the non-linear analysis of cross-sections loaded by normal forces and bending moments is presented in the paper. The mechanical model is based on the LAGRANGE principle of minimum of total potential energy. Deformations, stresses and limit load parameters are obtained by solving a non-linear optimisation problem. The mathematical model is independent of the specifics of material. In addition to the stress strain relation and the specific strain energy W(ε) two further functions F(ε) and Φ(ε) are introduced to describe the material behaviour. Thus cracks in concrete, non-linearity of material etc. can be taken into account without basic modification of the numerical algorithm. For polygonal cross-sections the GAUSS' integral theorem is used. Numerical solutions of the non-linear optimisation problems can be found by application of standard software. Thus the analysis of reinforced concrete cross-sections or more general composite cross-sections with non-linear behaviour of material is as simple as in the case of linear elasticity. The application of the method is demonstrated for polygonal cross-sections. Pre-stresses or pre-strains can easily be included in the mathematical model. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30027 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NUMERISCHE ANALYSE VON VERBUNDQUERSCHNITTEN MIT NICHTLINEAREM MATERIALVERHALTEN UNTER BERüCKSICHTIGUNG VON VORVERFORMUNGEN N2 - The presented method for an physically non-linear analysis of stresses and deformations of composite cross-sections and members based on energy principles and their transformation to non-linear optimisation problems. From the LAGRANGE principle of minimum of total potential energy a kinematic formulation of the mechanical problem can be developed, which has the general advantage that pre-deformations excited by shrinkage, temperature, residual deformations after unloading et al., can be considered directly. Thus the non-linear analysis of composite cross-sections with layers of different mechanical properties and different preloading becomes possible and cracks in concrete, stiffness degradation and other specifics of the material behaviour can be taken into account without cardinal modification of the mathematical model. The impact of local defects on the bearing capacity of an entire element can also be analysed in this principle way. Standard computational systems for mathematical optimisation or general programs for spreadsheet analysis enable an uncomplicated implementation of the developed models and an effective non-linear analysis for composite cross-sections and elements. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30039 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Richter, Katharina A1 - Donath, Dirk ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - AUGMENTING DESIGNERS MEMORY - REVISAL OF THE CASE-BASED REASONING PARADIGM IN ARCHITECTURAL EDUCATION AND DESIGN N2 - This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30047 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Rogoża, Agnieszka A1 - Stachon, T. A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS N2 - The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30050 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Rohr, Stefan ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NEUE MÖGLICHKEITEN IN DER ABLAUFPLANUNG DURCH DIE EREIGNISORIENTIERTE SIMULATION VON PRODUKTIONSPROZESSEN N2 - Durch die Betrachtung des Produktions-Prozesses als zentrales Transformationselement wird die Struktur der Bauproduktion realitätsnah gefasst. Die Integration der prozessorientierten Kostendefinition setzt relevante Kostenparameter und Produktionsfaktoren so in Beziehung, dass sie im Einklang mit der realen Kostenstruktur und Kostendynamik einer Baustelle stehen. Die Beziehung zwischen Bauzeit und Kosten wird direkt erfasst und ausgewertet. Der hohen Dynamik der Bauproduktion zwischen kapazitätsbeschränkten Einsatzmitteln und Produktionsprozessen wurde durch das Poolmodell und der Simulation als Berechnungsmethode Rechnung getragen. Eine einfache Modellierung von sich zyklusartig wiederholenden Arbeitsvorgängen (Taktplanung) ist möglich. Die Taktbildung vollzieht sich bei der Simulation durch Kapazitätsbeschränkungen ohne Zutun des Benutzers. Durch eine Optimierungsmethode kann automatisiert nach der kostengünstigsten oder zeitlich schnellsten Produktionsvariante gesucht werden KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30060 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Ryan, John A1 - Kraußhar, Rolf Sören ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ANALYSIS OF DIRAC OPERATORS ON SOME CONFORMALLY FLAT MANIFOLDS N2 - In this paper we shall review the role of Dirac operators arising in Clifford analysis over some examples of conformally flat manifolds. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30081 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Udo F. A1 - Lange, Michael ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - KOOPERATIVE BRANDSCHUTZPLANUNG MIT SOFTWARE-AGENTEN N2 - Die effektive Kooperation aller beteiligten Fachplaner im Bauplanungsprozess ist die Voraussetzung für wirtschaftliches und qualitativ hochwertiges Bauen. Bauprojektorganisationen bestehen in der Regel aus zahlreichen unabhängigen Planungspartnern, die örtlich verteilt spezifische Planungsaufgaben bearbeiten und die Ergebnisse in Teilproduktmodellen ablegen. Da Planungsprozesse im Bauwesen stark arbeitsteilig ablaufen, sind die Teilproduktmodelle der einzelnen Fachplanungen in hohem Maße voneinander abhängig. Ziel des hier vorgestellten Ansatzes ist die Integration der Teilproduktmodelle der Gebäudeplanung in einem netzwerkbasierten Modellverbund am Beispiel der Brandschutzplanung. Im Beitrag werden die Probleme der Verteiltheit und insbesondere der semantischen Heterogenität der involvierten Teilproduktmodelle betrachtet. Der verteilte Zugriff wird mithilfe mobiler Software-Agenten realisiert. Die Agenten können sich dabei frei im netzwerkbasierten Planungsverbund bewegen und agieren als Vertreter der Fachplaner. Das Problem der semantischen Heterogenität der Teilproduktmodelle wird auf der Basis von Ontologien gelöst. Dazu werden erstens Domänenontologien entwickelt, die Objekte der realen Welt einer abgeschlossenen Domäne, hier des Brandschutzes, abbilden. Zweitens werden Applikationsontologien entwickelt, die die einzelnen proprietären Datenhaltungen (im Sinne von Teilproduktmodellen) der jeweiligen Fachplanungen repräsentieren. Beide Ontologien werden mit einem regelbasierten Ansatz verknüpft. Im vorgestellten Anwendungsfall Brandschutz dient die Domänenontologie als einheitliche Schnittstelle für den Zugriff auf die verteilten Modelle und abstrahiert dabei von deren Datenbankspezifika und proprietären Schemata. Mithilfe von mobilen Agenten und semantischen Technologien kann so eine Plattform zur Verfügung gestellt werden, die erstens die dynamische Integration von Ressourcen in den Planungsverbund erlaubt und zweitens auf deren Basis unabhängig von der Verteiltheit und Heterogenität der eingebundenen Ressourcen ingenieurgerechte Verarbeitungsmethoden realisiert werden können. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30071 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Sampaio, Alcinia Zita A1 - Henriques, Pedro A1 - Studer, P. A1 - Luizi, Rui ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES N2 - The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30090 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schanz, Tom A1 - Wuttke, Frank A1 - Dineva, Petia ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - HYBRID APPROACH OF WAVE NUMBER INTEGRATION-BOUNDARY INTEGRAL EQUATION METHOD FOR SITE EFFECT ESTIMATION OF A LATERALLY VARYING SEISMIC REGION N2 - In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content Θ and suction Ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable Θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of Θ for any position along the column and (b) give the functional form for the scanning curves. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29132 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schapke, Sven-Eric A1 - Scherer, Raimar J. A1 - Katranuschkov, Peter ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SEMANTIC SERVICE ENVIRONMENTS FOR INTEGRATING TEXT WITH MODEL-BASED INFORMATION IN AEC/FM N2 - In distributed project organisations and collaboration there is a need for integrating unstructured self-contained text information with structured project data. We consider this a process of text integration in which various text technologies can be used to externalise text content and consolidate it into structured information or flexibly interlink it with corresponding information bases. However, the effectiveness of text technologies and the potentials of text integration greatly vary with the type of documents, the project setup and the available background knowledge. The goal of our research is to establish text technologies within collaboration environments to allow for (a) flexibly combining appropriate text and data management technologies, (b) utilising available context information and (c) the sharing of text information in accordance to the most critical integration tasks. A particular focus is on Semantic Service Environments that leverage on Web service and Semantic Web technologies and adequately support the required systems integration and parallel processing of semi-structured and structured information. The paper presents an architecture for text integration that extends Semantic Service Environments with two types of integration services. Backbone to the Information Resource Sharing and Integration Service is a shared environment ontology that consolidates information on the project context and the available model, text and general linguistic resources. It also allows for the configuration of Semantic Text Analysis and Annotation Services to analyse the text documents as well as for capturing the discovered text information and sharing it through semantic notification and retrieval engines. A particular focus of the paper is the definition of the overall integration process configuring a complementary set of analyses and information sharing components. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30125 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER -