TY - JOUR A1 - Dudek, Mariusz T1 - Zur Bewertung der Struktur von Verkehrsnetzen N2 - In diese Veröffentlichung werden die Kennziffern dargestellt, die zur Beurteilung der Struktur von Verkehrsnetzen behilflich sein können. Zu diesem Zweck wurde die Graphentheorie angewendet. Eine erste Gruppe von Bewertungen stützt sich auf die Anzahl der Knoten und Bögen des Netzes. Detailliertere Informationen über Engpässe oder Schwachstellen im Verkehrsnetz erhält man durch die Analyse der Kantenzusammenhangs. Die Unabhängigkeit der einzelnen Verkehrsarten , ihre Bewertung und Maßnahmen, sie zu verbessern werden vorgeschlagen und diskutiert. Weiteren Untersuchungen werden angeregt. KW - Verkehrsnetz KW - Kennzahl KW - Bewertung KW - Graphentheorie Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4634 ER - TY - CHAP A1 - Köppler, H. A1 - Roos, Dirk A1 - Burkhardt, Gerhard T1 - Zur Berechnung vielschichtiger Schalen mit orthotropen Schichten N2 - Wirklichkeitsnahe Erfassung und Beschreibung des Trag- und Verformungsverhaltens von Strukturen baulicher Anlagen hat in den letzten Jahrzehnten ständig an Bedeutung gewonnen. Konstruktionen im Hoch- und Industriebau werden zunehmend multifunktional genutzt - die >Grenzen< zwischen Bauwerk und Tragwerk, zwischen Hüll- und Tragkonstruktion lösen sich auf. Werden raumabschließende Elemente (Wände, Decken, Dächer) gleichzeitig als Tragelemente und wärme- und schalldämmende Konstruktionen ausgeführt, so entstehen beispielsweise Sandwichplatten, deren Schichten sehr stark differierende Materialeigenschaften aufweisen. Beim Aufbau des FEM-Modells für vielschichtige Schalen können die Formänderungshypothesen für jede Schicht einzeln als auch für die Schale insgesamt gegeben werden. Im ersten Fall ist der Knotenfreiheitsgrad von der Schichtenzahl abhängig, im zweiten Fall nicht. Im weiteren wird eine Formänderungshypothese für das Schichtenpaket angenommen. Ausgegangen wird von den Gleichungen der 3D-Elastizitätstheorie. Die Berücksichtigung der Querkraftschubverformungen ergibt die Möglichkeit einer adäquaten Beschreibung der Verformungen sowohl dünner Schalen als auch von Schalen mittlerer Dicke; die Berechnung der Krümmungen und der LAMEschen Parameter der Bezugsfläche zu umgehen, was für komplizierte Schalenformen eine selbständige Aufgabe ist; eines natürlichen Übergangs von homogenen zu geschichteten Schalen. Das vielschichtige isoparametrische Schalen-FE wird vorgestellt, seine Implementierung in das in Entwicklung befindliche Programmsystem SLANG wird vorbereitet. KW - Schale KW - Sandwichbauweise KW - Orthotropes Bauteil KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4379 ER - TY - JOUR A1 - Krzizek, H. T1 - Zur bauingenieurgerechten Speicherung von Entwurfsplänen des konstruktiven Ingenieurbaues in Datenbanken N2 - Es wird gezeigt, daß im allgemeinen die Zeichnungsinhalte von Entwurfsplänen im konstruktiven Ingenieurbau in Teilzeichnungen zerlegt werden können, denen fachspezifische Objekte des Bauwesen entsprechen. Solche Objekte sind beispiels- weise Querschnitte, Träger, Stützen und Fundamente. Diese Teilobjekte werden durch eine unterschiedliche Anzahl von Parametern festgelegt werden. Wählt man für diese Parameter die entsprechendnen Fachbegriffe, so hat man durch diese die Möglichkeit die Teilobjekte auch in Datenbanken zu speichern. Neben den Sachparametern müssen auch zeichnungs- technische Werte, wie Maßstab, gewählte Längeneinheiten (m,cm..) und Einsatzpunkt - für die Lage des Teilobjektes im Gesamtplan - gespeichert werden. Zeichenmodule für jedes Teilobjekt können dann bei Aufruf eines bestimmten Planes aus den Daten der Datenbank die Teilzeichnungen generieren, sodaß eine Planspeicherung in der übliche Speicherform (Speicherelemente Punkt, Linie usw.) nicht mehr erforderlich ist. Neben der reinen Darstellung können die Programmodule auch dahingehend erweitert werden, daß auch die zugehörigen Berechnungen durchgeführt werden. Die numerischen Ergebnisse wie auch die Eingabewerte werden in einem alfanumerischen Dokument abgelegt. Damit ergibt sich dann ein Konstruktionsystem für den Entwurf, das insbesondere die Berechnung von Varianten sehr erleichertert. In Sonderfällen können auch die Pläne in ein Standard CAD Programm eingelesen werden, um allfällige Besonderheiten interaktiv zu ergänzen. Das relationale Modell wird weiters vorgestellt, nach dem die Zeichnungsinhalte gespeichert werden. Neben reinen Teilobjektsätzen werden auch Tabellensätze verwendet, um unter einem Namen mehrere numersiche Daten verwalten zu können. Es werden auch sogenannte Fort- setzungssätze besprochen, die in Entsprechung der stark unterschiedlichen Anzahl der Objektattibute verwendet werden. KW - Ingenieurbau KW - Bauzeichnung KW - Datenbankverwaltung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4850 ER - TY - CHAP A1 - Hartmann, Friedel A1 - Maucher, Roland T1 - Zum Momentengleichgewicht bei Tragwerksberechnungen nach Theorie zweiter Ordnung N2 - Es wird gezeigt, daß zur Aufstellung eines korrekten Momentengleichgewichts nach Theorie zweiter Ordnung für Querkräfte die Hebelarme des unverformten Systems und für Normalkräfte Hebelarme des verformten Systems zu benutzen sind. Im Allgemeinen ist es aber nicht möglich, die Knotenverformungen eines Rahmens in relevante und nicht relevante Anteile zu zerlegen, so daß ein Momentengleichgewicht bei Berechnungen nach Theorie zweiter Ordnung im Allgemeinen nicht sinnvoll ist. KW - Baustatik KW - Theorie zweiter Ordnung KW - Biegemoment KW - Gleichgewicht Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4336 ER - TY - JOUR A1 - Donath, Dirk A1 - Petzold, Frank T1 - Zukünftige Techniken für eine computergestützte Planungspraxis - applikative Tools für die architektonische Bestandserfassung N2 - Der Beitrag beschreibt die Entwicklung eines Softwaresystems zur strukturierten Erfassung und Verwaltung bestehender Gebäude in der Architektur. Die Erfassung erfolgt durch die Aufnahme von geometrischen Daten und Sachdaten in unterschiedlichen Abstraktionsstufen unter Einbeziehung einer vorangehenden Dekomposition. Basis für die Entwicklung eines solchen Systems ist die Analyse und Systematik der Erfassungstechniken, -abläufe und der Gegenstand der architektonischen Bestandsaufnahme. Parallel hierzu erfolgt die Bewertung und Nutzung aktueller Techniken und Werkzeuge der applikativen Informatik. Schwerpunkte der Forschungsarbeit sind die Ableitung einer allgemeinen Gebäude- und Bauteilstruktur, die Einbeziehung aktueller informationstechnischer Verfahren und Werkzeuge und die Entwicklung eines entsprechenden Experimentalsystems. Auf eine Auswahl softwaretechnischer Entwicklungen wird näher eingegangen (objektspezifische Eigenschaften, flexible Geometrieerfassung und Benutzeroberflächen). KW - Bauaufnahme KW - Bauplanung KW - Computerunterstütztes Verfahren Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4962 ER - TY - JOUR A1 - Haller, P. A1 - Menzel, R. T1 - Wissensbasierte Tragwerksplanung im Ingenieurholzbau mit ICAD N2 - Der Entwurf einfacher Konstruktionen stellt für den Tragwerksplaner zumeist eine Routineaufgabe dar. Üblicherweise werden Statik, Zeichnungen sowie Elementelisten separat voneinander erstellt. Das Programmsystem ICAD bietet die Möglichkeit, diese Arbeiten in einer Bearbeitungsstufe durchzuführen. Die Programmierung der Bemessung, Darstellung und Auswertung von Bauteilen wird mit dem Editor Emacs vorgenommen, die grafische Umsetzung des compilierten Quelltextes erfolgt im ICAD-Browser. Innerhalb dieser Benutzeroberfläche steht eine Reihe von Werkzeugen für die Eingabe und Visualisierung von Daten zur Verfügung. Betrachtet man die zu bearbeitenden Bauteile und Anschlüsse als bekannte Konstruktionen des Ingenieurholzbaus, für die es eine festgelegte Anzahl von Abmessungen und Kennwerten gibt, so läßt sich jede dieser Konstruktionen als eigenständiger Modul programmieren. Der Tragwerksplaner ist somit in der Lage, aus einem Katalog an Bauteilen und Anschlüssen die Gesamtkonstruktion zusammenzustellen. Allgemeingültige Kennwerte, Berechnungsverfahren und häufig verwendete Unterprogramme stehen modular als Wissensbasis zur Verfügung und werden von den einzelnen Tragelementen bedarfsgerecht eingebunden. Eine weitere Möglichkeit der wissensbasierten Tragwerksplanung stellt die sogenannte Multi-Criteria-Analyse dar. Bei diesem Verfahren nimmt das Programm selbständig eine Entscheidungsfindung für eine oder mehrere günstige Konstruktionslösungen vor. Dazu sind lediglich Wichtungen verschiedener Randbedingungen durch den Anwender erforderlich. KW - Ingenieurholzbau KW - Tragwerk KW - CAD KW - Lernendes System Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4976 ER - TY - JOUR A1 - Steinhage, V. T1 - Wissensbasierte Mustererkennung zur Erfassung von Bauplänen N2 - Due to technological progress and European standardization (e.g. ISO certification) there is an increasing demand to automate the digital recording of building plans. Currently there are two approaches available: (1) labour-intensive redrawing with digitizing tablets or by screen digitizing, (2) automatic scanning and vectorizing where vectorization generally demands an interactive follow-up treatment due to incomplete or ambigues results. This paper proposes a knowledge-based approach for building plan analysis. The procedure reveals the following processing steps: scanning of the building plan, enhancing the image quality and binarization, extraction of lines, line junctions and character fields, knowledge-based interpretation and grouping of image features to domain specific feature aggregates like door symbols, stair symbols etc., optical character recognition and lexicon-based interpretation of character fields, matching of feature aggregates with dimension sets. First results of a prototype implementation are presented. At last an extension of the approach towards a semantic modeling concept showing a coupling between 3D object modeling and an explict 2D modeling of images and technical drawings is presented KW - Bauzeichnung KW - Mustererkennung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4881 ER - TY - JOUR A1 - Steinmann, Frank A1 - Hübler, Reinhard T1 - Vorgehensmodelle als Basis der Gestaltung durchgaengiger CAD-Systeme N2 - Für die Gestaltung einer durchgängigen Unterstützung des Entwurfsprozesses stehen gegenwärtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repräsentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen berücksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. Für ein echtes CADesign bildet dessen Klärung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise ähnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivitäten ergeben sich für: die Systematisierung computergestützter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsfähigen UNDO- bzw. TMS-Mechanismen. KW - CAD KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4568 ER - TY - CHAP A1 - Hohmann, Georg T1 - Von der Netzplantechnik zur Simulation - Analyse von Bauprozessen mit Hilfe von Petri-Netzen N2 - Nichtstationäre Baustellenprozesse sind dadurch gekennzeichnet, daß ihr Ablauf nicht vollständig vorhersehbar ist, sondern einer Vielzahl von Störungen unterworfen sein kann. Zur Planung und Steuerung dieser Prozesse sind daher Methoden erforderlich, welche u.a. eine große Anpassungsfähigkeit, die Darstellung paralleler Vorgänge, die Erfassung plötzlicher Störungen sowie stochastische bzw. unscharfe Parameter zulassen. Hiervon ausgehend wurden spezielle Simulationssysteme entwickelt. In der Praxis dient jedoch in den meisten Fällen das Balkendiagramm bzw. die Netzplantechnik als Planungshilfsmittel. Dabei ist der Informationsgehalt der Netzplantechnik eindeutig geringer gegenüber der Simulation. Auch fallen deterministische Berechnungen in der Regel zu optimistisch aus. Ein Wechsel von der Netzplantechnik zur Simulation ist möglich, indem zunächst Netzpläne auf der Grundlage von Petri-Netzen dargestellt werden und somit ein schrittweiser Übergang zur Simulation erfolgt. Neben der Modellbildung kommt der Bereitstellung realitätsnaher Parameter, die den Berechnungen zugrunde gelegt werden, eine große Bedeutung zu. Bei der Terminplanung sind Kenntnisse zu bestimmten äußeren Einflüssen (z. B. Niederschlag) oft nur in unscharfer Weise vorhanden. Hier bietet sich der Einsatz von Fuzzy-Verfahren an. Mit ihrer Hilfe lassen sich unscharfe Faktoren erfassen und in die Planung einbeziehen. Sowohl zur Darstellung von Petri-Netzen als zur Berechnung (Simulation) auf deren Grundlage sowie zur Aufbereitung der Daten mittels Fuzzy-Verfahren liegen entsprechende Rechenprogramme vor. KW - Bauablauf KW - Prozessmodell KW - Netzplantechnik KW - Petri-Netz Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4511 ER - TY - JOUR A1 - Ilieva, D. A1 - Pahl, Peter Jan T1 - Verteilte Bearbeitung von Zeichnungen im Bauwesen N2 - Eine Bauunterlage ist in der Regel an mehreren Orten vorhanden. Sie wird von verschiedenen Personen an verschiedenen Orten zu verschiedenen Zeitpunkten geändert. Die Änderungen sind häufig und in vielen Fällen von geringem Umfang. Die Verteilung solcher Unterlagen in Computernetzen, sowie die Durchführung und die Verwaltung von Änderungen stellen hohe Anforderungen an die Informations- und Kommunikationstechnik. Insbesondere ist die Konsistenz der Unterlagen unter Berücksichtigung der typischen Merkmale des Arbeitsablaufes im Bauwesen zu sichern. Im Vortrag wird ein Konzept für die Bearbeitung von Bauunterlagen, insbesondere für Zeichnungen, in Computernetzen vorgestellt. Grundlage dieses Konzeptes ist die Norm ISO 10303 STEP (The standard for exchange of product model data). Das AP 201 >Explicit draughting< der ISO 10303 wurde als Austauschformat für Zeichnungen festgelegt. Im Rahmen des Vortrages wird ein Projektmodell vorgestellt. Das Projektmodell bildet den Informationsfluß während des Bauprozesses ab und ermöglicht die Sicherung der Konsistenz einer Zeichnung während der Bearbeitung der verschiedenen Fachleute. Bei Änderung einer Zeichnung wird ausschließlich die Differenzmenge als Information übertragen. Da die Arbeitsweise des Ingenieurs im Bauwesen eine Vollauthomatisierung des Datenaustausches nicht zuläßt, werden Änderungen nur nach Entscheidung des zuständigen Fachmanns in die ursprüngliche Fassung der Zeichnung übernommen. Werkzeuge für die Unterstützung der Auflösung von Widersprüchen in einem Dokument werden vorgestellt. KW - Bauzeichnung KW - Datenbank KW - Verteiltes Datenverarbeitungssystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4860 ER - TY - CHAP A1 - Schallehn, W. T1 - Umweltorientiertes Projektmanagement N2 - Das studentische Projekt Umweltorientiertes Projektmanagement (UWoPM) eröffnet eine neue Generation von Arbeitsweisen im Projektmanagement. Umweltbelange wirken über Rechtsvorschriften immer stärker in das Projektgeschäft hinein. Durch Einbeziehung von rechtsrelevanten Daten in die Projektdatenbasis sowie von Rechtsbestimmungen in die Wissensbasis wird eine Softwareunterstützung für (wenn auch zunächst nur elementare) Rechtsfragen geboten. Eine spezielle Präsentation von Rechtswissen und eine komfortable Unterstützung der Antragstellung sollen dies in die Selbstverständlichkeiten des Projektmanagements einbringen. Gleichzeitig bietet der UWoPM-Prototyp zeitgemäße Systemlösungen für die Kommunikation Antragsteller - Behörde sowie für den Workflow innerhalb der Genehmigungsbehörde. Dieser Vortrag gibt Einführung und Übersicht zu insgesamt 18 Diplomarbeiten, in denen die Einzelkomponenten des UWoPM entwickelt wurden. Zentrales Problem war die Überführung gesetzlicher Vorschriften in Wissensbasen. Durch Beschränkung auf >Kernbestimmungen< und Ausweis von Interpretationsbedarf wurde ein prinzipieller Lösungsweg realisiert. Die technische Realisierung konnte zwar über einen Prototyp noch nicht hinausgehen, weist aber die Realisierbarkeit des Gesamtansatzes nach. KW - Projektmanagement KW - Umweltfaktor Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4528 ER - TY - JOUR A1 - Ganev, T. A1 - Marinov, M. T1 - Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency N2 - Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed. KW - Platte KW - Optimierung KW - Freie Schwingung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5375 ER - TY - JOUR A1 - Minch, M. J. A1 - Trochanowski, A. T1 - The numerical Modelling and Analysis of RC cracked Structures N2 - The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown. KW - Tragwerk KW - Stahlbeton KW - Rissbildung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5278 ER - TY - JOUR A1 - Tolok, V. A. A1 - Tolok, A. V. A1 - Gomenyuk, S. I. T1 - The instrumental System of Mechanics Problems Analysis of the deformed Solid Body N2 - In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics. KW - Festkörpermechanik KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5361 ER - TY - JOUR A1 - Kazakevitch, M. I. A1 - Volkova, Viktorija T1 - The exact Solution of the free pre-stressed Bar-Oscillations N2 - In this paper the results of the investigations of the free oscillations of the pre-stressed flexible structure elements are presented . Two cases of the central preliminary stress are investigated : without intermediate fastening of the tie to the flexible element and with the intermediate fastening in the middle of the element length. The given physical model can be applied to the flexible sloping shells and arches, membranes, large space antenna fields (besides flexible elements). The peculiarity of these systems is the possibility of the non-adjacent equilibrium form existence at the definite relations of the physical parameters . The transition from one stable equilibrium form to another, non-adjacent form, may be treated as jump. In this case they are called systems with buckling or the systems with two potential «gaps». These systems commenced the new section of the mathematical physics - the theory of chaos and strange attractors. The analysis of the solutions confirms the received for the first time by the author and given in effect of the oscillation period doubling of the system during the transition from the «small» oscillations relatively center to the >large< relatively all three equilibrium conditions. The character of the frequency (period) dependence on the free oscillation amplitudes of the non-linear system also confirms the received earlier result of the duality of the system behaviour : >small< oscillations possess the qualities of soft system; >large< oscillations possess the qualities of rigid system. The >small< oscillation natural frequency changing, depending on the oscillation amplitudes, is in the internal . Here the frequency takes zero value at the amplitude values Aa and Ad (or Aa and Ae ); the frequency takes maximum value at the amplitude value near point b .The >large< oscillation natural frequency changes in the interval . Here is also observed . The influence of the tie intermediate fastening doesn't introduce qualitative changes in the behaviour of the investigated system. It only increases ( four times ) the critical value of the preliminary tension force KW - Bauteil KW - Vorspannung KW - Freie Schwingung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5356 ER - TY - JOUR A1 - Strukelj, A. A1 - Skrinar, Matjaz T1 - The Evaluation of the Dynamical Soil-Bridge Interaction N2 - In the design of a structure, the implementation of reliable soil-foundation-structure interaction into the analysis process plays a very important role. The paper presents a determination of parameters of a suitably chosen soil-foundation model and their influence on the structure response. Since the mechanical data for the structure can be determined with satisfactory accuracy, the properties of the soil-foundation model were identified using measured dynamic response of the real structure. A simple model describing soil-foundation structure was incorporated into the classical 3-D finite element analysis of the structure with commercial software. Results obtained from the measured data on the pier were afterwards compared with those obtained with the finite model of the pier-foundation-soil structure. On the basis of this comparison the coefficients describing the properties in the soil-foundation model were adjusted until the calculated dynamic response coincided with the measured ones. In this way, the difference between both results was reduced to 1%. Full-scale tests measuring eigenmotion of the bridge were performed through all erection stages of the new bridge in Maribor. In this way an effective and experimentally verified 3-D model for a complex dynamic analysis of the bridge under the earthquake loading was obtained. The significant advantage of the obtained model is that it was updated on the basis of the dynamic measurements thus improving the model on the basis of in-situ geomechanical measurements. The model is very accurate in describing the upper structure and economical in describing the soil mass thus representing an optimal solution regarding computational efforts. KW - Boden-Bauwerk-Wechselwirkung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5397 ER - TY - JOUR A1 - Kazakevitch, M. I. A1 - Kulyabko, V. V. A1 - Dubichvost, A. A. T1 - The discrete dynamic Models of the Interaction of complex - composite Structures with the dynamic Loads N2 - In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures. KW - Verbundtragwerk KW - Dynamische Belastung KW - Wechselwirkung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5219 ER - TY - CHAP A1 - Abramian, A. K. T1 - Superelliptic Shells as new constructive Forms N2 - In the superelliptic shell joined to a circular cylinder bending stresses are absent when it is subjected to uniform pressure.Some geometrical characteristics have been found. Expressions for determining stresses in the shell crest(in the singular point of plane type) are suggested. The problem of a theoretical critical buckling load of an elongated shell supported by frames is studied. A critical buckling load for two shells with different specifications was found experimentally. KW - Schale KW - Ellipsoid KW - Beulung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4347 ER - TY - THES A1 - Coulon, Carl-Helmut T1 - Strukurorientiertes Fallbasiertes Schließen T1 - Structure oriented case based reasoning N2 - Das Ziel dieser Arbeit war es, durch Verwendung geeigneter vorhandener CAD-Pläne die Bearbeitung neuer CAD-Pläne zu unterstützen. Entstanden ist ein generischer Ansatz zum fallbasierten Schließens. Da in CAD-Plänen die räumliche Struktur eine wichtige Rolle spielt, ist das Konzept auf strukturorientierte Anwendungen ausgerichtet. Deshalb bezeichne ich es als ein Konzept zum " strukturorientierten fallbasierten Schließen". Die Arbeit spezifiziert das Minimum an Wissen, welches zur Suche und Wiederverwendung von Fällen benötigt wird, wie das darüber hinausgehende Wissen verarbeitet wird, welche Zusammenhänge es zum Beispiel zwischen Vergleichs- und Anpassungswissen gibt und wie man das Wissen modellieren kann. Zur Erläuterung wird das benötigte Wissen anhand verschiedener Anwendungen dargestellt. Das in der Arbeit vorgestellte Konzept erlaubt die Ergänzung, Detaillierung und Korrektur einer Anfrage. Die beiden entscheidenden Algorithmen dienen dem Vergleich von Anfrage und Fall und der Anpassung der Information des Falles zur Modifikation der Anfrage. N2 - The task of this thesis was the computer supported reuse of known CAD-designs in order to create new CAD-designs. The developed solution contains a generic approach to case based reasoning. Due to the relevance of spatial structures in CAD-designs the approach focusses on structure oriented applications. Therefore it is called an approach for „structure oriented case based reasoning". This thesis specifies the kind of the minimum knowledge required for retrieval and reuse of cases, how to integrate additional knowledge, relations between knowledge needed for comparision and adaption and how to model the knowledge. For illustration the required knowledge is described for different applications. The developed concept allows to extend, detail and correct a given query. The two most important algorithms are used to compare cases and query and to reuse the information found in a case to modify a query. KW - Fallbasiertes Schließen KW - Bauplanung KW - CAD KW - Problemlösen KW - Wissensmodellierung KW - Strukturvergleich KW - Anpassung KW - Knowledge modelling KW - comparison of structure KW - adaption Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040212-265 ER - TY - JOUR A1 - Girlich, E. A1 - Kovalev, M. A1 - Zaporozhets, A. T1 - Standardization problem: Ressource Allocation in a Network N2 - We consider the standardization problem (SP) which can be formulated as follows. It is known demand bi in each type i in {1, 2, ..., n} of items. Production of yi items of the ith type brings a profit fi (yi), where fi is a nondecreasing concave function for each i in {1, 2, ..., n}.It is necessary to satisfy the demand and to maximize the total profit provided that there exist >standardization possibilities< . These possibilities means that some types of items can be replaced by some another types. We introduce generalized standardization problem (GSP) in which titems demand is given as the set of admissible demand vectors. We show that GSP and SP are special cases of the resource allocation problem over a network polymatroid. Ibasing on this observation we propose a polynomial time solution algorithm for GSP and SP. KW - Ressourcenallokation KW - Standardisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5172 ER - TY - JOUR A1 - Schneider, Ulrich A1 - Beucke, Karl T1 - Standardisierung der Kommunikation als Integrationsansatz für das Bauwesen N2 - Eine der wichtigsten Aufgaben und Herausforderungen der Bauinformatik ist gegenwärtig die Realisierung des durchgängigen, fachübergreifenden Datenflusses im Planungsprozeß eines Bauvorhabens. Im Hinblick auf die internationale Wettbewerbsfähigkeit der deutschen Bauwirtschaft ist es unumgänglich, vorhandene Effizienzpotentiale in der Bauplanung auszuschöpfen, welche durch eine qualitative Verbesserung der Planung sowie durch eine Verringerung der Bearbeitungszeit aller beteiligten Fachplanern erreicht werden können. Nach dem gegenwärtigen Stand der Technik werden die Informationsobjekte standardisiert, damit sie durchgängig nutzbar sind. Diese werden in einem allgemeingültigen Format den speziellen Programmen der Fachplaner zur Verfügung gestellt. In dieser Arbeit wird der Ansatz verfolgt, eine Integration durch die Standardisierung der Kommunikation zwischen den Informationsobjekten und ihren Anwendungsprogrammen zu erreichen. Dabei kann auf die Standardisierung der zu übertragenden Objekte verzichtet werden. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte sowie die Anwendungen, die solche Objekte aufnehmen wollen, erfüllen müssen. Die Bearbeitung der Objekte soll in den gewohnten Anwendungen in unveränderter Weise erfolgen. KW - Bauwesen KW - Datenaustausch KW - Standardisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5483 ER - TY - JOUR A1 - Strukelj, A. T1 - Some Problems in Obtaining the Green's Function of the Layered Soil N2 - The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process KW - Bodenmechanik KW - Geschichtetes Medium KW - Green-Funktion Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5388 ER - TY - JOUR A1 - Bucher, Christian A1 - Schorling, York T1 - SLang - the Structural Language : Solving Nonlinear and Stochastic Problems in Structural Mechanics N2 - Recent developments in structural mechanics indicate an increasing need of numerical methods to deal with stochasticity. This process started with the modeling of loading uncertainties. More recently, also system uncertainty, such as physical or geometrical imperfections are modeled in probabilistic terms. Clearly, this task requires close connenction of structural modeling with probabilistic modeling. Nonlinear effects are essential for a realistic description of the structural behavior. Since modern structural analysis relies quite heavily on the Finite Element Method, it seems to be quite reasonable to base stochastic structural analysis on this method. Commercially available software packages can cover deterministic structural analysis in a very wide range. However, the applicability of these packages to stochastic problems is rather limited. On the other hand, there is a number of highly specialized programs for probabilistic or reliability problems which can be used only in connection with rather simplistic structural models. In principle, there is the possibility to combine both kinds of software in order to achieve the goal. The major difficulty which then arises in practical computation is to define the most suitable way of transferring data between the programs. In order to circumvent these problems, the software package SLang (Structural Language) has been developed. SLang is a command interpreter which acts on a set of relatively complex commands. Each command takes input from and gives output to simple data structures (data objects), such as vectors and matrices. All commands communicate via these data objects which are stored in memory or on disk. The paper will show applications to structural engineering problems, in particular failure analysis of frames and shell structures with random loads and random imperfections. Both geometrical and physical nonlinearities are taken into account. KW - Baustatik KW - Nichtlineares Phänomen KW - Zufallsvariable KW - Programm Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4957 ER - TY - JOUR A1 - Möller, B. A1 - Beer, M. A1 - Graf, W. A1 - Hoffmann, Alfred T1 - Sicherheitsbeurteilung von Tragwerken mit Fuzzy-Modellen N2 - Die Sicherheit von Tragwerken hängt von der zuverlässigen Modellierung sämtlicher Tragwerksparameter ab. Üblicherweise werden diese Parameter als deterministische oder stochastische Größen beschrieben. Stochastische Größen sind Zufallsgrößen, die unscharfe Informationen über Tragwerksparameter mit Hilfe von Dichtefunktionen erfassen. Nicht alle unscharfen Tragwerksparameter lassen sich als Zufallsgrößen darstellen. Sie können jedoch als Fuzzy-Größen modelliert werden. Fuzzy-Größen beschreiben unscharfe Tragwerksparameter als unscharfe Menge mit Bewertungsfunktion (Zugehörigkeitsfunktion). Die Fuzzy-Modellierung im Bauingenieurwesen umfaßt die Fuzzifizierung, die Fuzzy-Analyse, die Defuzzifizierung und die Sicherheitsbeurteilung. Sie erlaubt es, Tragwerke mit nicht-stochastischen unscharfen Eingangsinformationen zu untersuchen. Nicht-stochastische Eingangsinformationen treten sowohl bei bestehenden als auch bei neuen Tragwerken auf. Die unscharfen Ergebnisse der Fuzzy-Modellierung gestatten es, das Systemverhalten zutreffender zu beurteilen; sie sind die Ausgangspunkte für eine neue Sicherheitsbeurteilung auf der Grundlage der Möglichkeitstheorie. Bei der Fuzzy-Analyse ist die alpha-Diskretisierung vorteilhaft einsetzbar. Bei fehlender Monotonie der deterministischen Berechnungen und unter Berücksichtigung der Nichtlinearität wird die Fuzzy-Analyse mit Optimierungsalgorithmen durchgeführt. Zwei Beispiele werden diskutiert: die Lösung eines transzendenten Eigenwertproblems und eines linearen Gleichungssystems. Die Systemantworten der Fuzzy-Analyse werden der Sicherheitsbeurteilung zugrunde gelegt. Für ausgewählte physikalische Größen werden Versagensfunktionen definiert. Diese bewerten die Möglichkeit des Versagens. Mit Hilfe von Min-max-Operationen der Fuzzy-Set-Theorie erhält man aus Versagensfunktion und Fuzzy-Antwort die Versagensmöglichkeit bzw. die Überlebensmöglichkeit. Die ermittelte Versagensmöglichkeit repräsentiert die subjektive Beurteilung der Möglichkeit, daß das Ereignis &qout;Versagen&qout; eintritt. Beispiele zeigen die Unterschiede zwischen der Sicherheitsbeurteilung mittels Fuzzy-Modells und mittels deterministischen Modells. KW - Tragwerk KW - Sicherheit KW - Fuzzy-Logik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4625 ER - TY - JOUR A1 - Emelichev, V. A. A1 - Girlich, E. A1 - Podkopaev, D. P. T1 - Several kinds of Stability of efficient Solutions in Vector Trajectorial discrete Optimization Problem N2 - This work was partially supported by DAAD, Fundamental Researches Foundation of Belarus and International Soros Science Education Program We consider a vector discrete optimization problem on a system of non- empty subsets (trajectories) of a finite set. The vector criterion of the pro- blem consists partial criterias of the kinds MINSUM, MINMAX and MIN- MIN. The stability of eficient (Pareto optimal, Slater optimal and Smale op- timal) trajectories to perturbations of vector criterion parameters has been investigated. Suficient and necessary conditions of eficient trajectories local stability have been obtained. Lower evaluations of eficient trajectories sta- bility radii, and formulas in several cases, have been found for the case when l(inf) -norm is defined in the space of vector criterion parameters. KW - Diskrete Optimierung KW - Stabilität KW - Trajektorie (Mathematik) Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5030 ER - TY - JOUR A1 - Dzwigon, Wieslaw T1 - Schätzung der Verkehrs-Verteilung (O-D Matrix) bei der Anwendung der Verkehrsstärkemessung in den Straßenquerschnitten N2 - O-D Matrix sind die wichtigste Informationsquelle, die den Bedarf an Transport in der Stadt betrifft. Sie dienen den richtigen Bildung von Straßennetz und Öffentlichen Personen Verkehrslinien. Anhand diesen Grundlagen gerechnet man Verkehrsstärken, die zur Dimensionierung der Verkehrsinfrastruktur benutzt werden. Im Verkehrsplannung zur Rechnung O-D Matrix wird Vier - Stufen - Methode angewendet. In dieser Methode verwendet man die Angaben aus den Haushaltsumfragen und aus den Kordonumfragen. Diese Methode fordert einen großen Arbeitsaufwand und Kosten. Hier wird die andere Methode dargestellt. Bei Schätzung der O-D Matrix verwendet man die Verkehrsstärken, die in den Straßenquerschnitten gemessen werden. Wir brauchen gemessene Verkehrsstärken auch für andere Ziele (z. B. für Signalsteuerung, für Beobachtung des Motorisierungstrendes). Darum ist diese Methode billiger als das traditionelle Verfahren. In diesen Methode haben wir zwei Möglichkeiten. Die erste - von Verkehrsstärkemessungen kann man O-D Matrix direkt schätzen. Und zweite Möglichkeit - zuerst rechnen wir die Verkehrserzeugungen und später O-D Matrix. Das zweite Verfahren hat einen wesentlichen Vorteil und zwar, anhand der Verkehrserzeugungen ist es möglich alle Elemente O-D Matrix zu rechnen. Bei der Schätzung der O-D Matrix unmittelbar von den Messungen (das erste Verfahren) bekommt man nur diese Elemente, die in den beobachtenen Straßenquerschnitten auftreten. KW - Stadtverkehr KW - Verkehrsaufkommen Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4647 ER - TY - CHAP A1 - Adamski, A. A1 - Bryniarska, Z. T1 - Schedule Synchronisation in public Transport by Tabu Search and Genetic Method N2 - This paper concerns schedule synchronization problems in public transit networks. In particular, it consists of three main parts. In the first the subject area is introduced, the terms are defined and framework for optimal synchronization in the form of problem representation and formulation is proposed. The second part is devoted to transfer synchronization problem when passengers changing transit lines at transfer points. The intergrated Tabu Search and Genetic solution method is developed with respect to this specific problem. The third part deals with headways harmonization problem i.e. synchronization of different transit lines schedules on a common segments of routes. For the solution of this problem a new bilevel optimization method is proposed with zones harmonization at the bottom level and co-ordination of zones, by time buffers assigned to timing points, at the upper level. Finally, the synchronization problems are numerically illustrated by real-life examples of the public transport lines in Cracow. KW - Öffentlicher Personennahverkehr KW - Verkehrsnetz KW - Synchronisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4146 ER - TY - JOUR A1 - Bakurova, A. V. A1 - Perepelitsa, V. A. A1 - Zin'kovskaya, J. S. T1 - Research of Stability of Vector Problem of spanning Tree with topological Criteria N2 - A multicriterial statement of the above mentioned problem is presented. It differes from the classical statement of Spanning Tree problem. The quality of solution is estimated by vector objective function which contains weight criteria as well as topological criteria (degree and diameter of tree). Many real processes are not determined yet. And that is why the investigation of the stability is very important. Many errors are connected with calculations. The stability analysis of vector combinatorial problems allows to discover the value of changes in the initial data for which the optimal solution is not changed. Furthermore, the investigation of the stability allows to construct the class of the problems on base of the one problem by means of the parameter variations. Analysis of the problems with belong to this class allows to obtaine axact and adecuate discription of model KW - Spannender Baum KW - Vektorfunktion KW - Stabilität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5159 ER - TY - JOUR A1 - Voronin, V. P. T1 - Renovation's peculiarities of industrial enterprises in conditions of economic selfsufficiency N2 - Probleme of recrienfation of building complex, to the sharp increase of share of reconstruction works, capital repair and modernisation of in-dustrial plants are concidered in this work. The conception of develop-ment and creation of unitified system of expluatation and renovation of industrial plants are worded out. This system is based on date-computer technology and taking into conciderations of real economic relations. KW - Bauwerk KW - Rekonstruktion KW - Wirtschaftlichkeit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5296 ER - TY - CHAP A1 - Mahdavi, A. A1 - Mathew, P. A1 - Hartkopf, V. T1 - Real-time Coupling of Multi-Domain Representational and Analytical Building Object Models via Homology-based Mapping N2 - Ideally, multiple computational building evaluation routines (particularly simulation tools) should be coupled in real-time to the representational design model to provide timely performance feed-back to the system user. In this paper we demonstrate how this can be achieved effectively and conveniently via homology-based mapping. We consider two models as homologous if they entail isomorphic topological information. If the general design representation (i.e., a shared object model) is generated in a manner so as to include both the topological building information and pointers to the semantic information base, it can be used to directly derive the domain representations (>enriched< object models with detailed configurational information and filtered semantic data) needed for evaluation purposes. As a proof of concept, we demonstrate a computational design environment that dynamically links an object-oriented space-based design model, with structurally homologous object models of various simulation routines. KW - Gebäude KW - Objektmodell KW - CAD Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4461 ER - TY - JOUR A1 - Venturino, Ezio A1 - Raciti, F. T1 - Quaternion methods for random matrices in quantum physics N2 - The theory of random matrices, or random matrix theory, RMT in what follows, has been developed at the beginning of the fties to describe the sta- tistical properties of energy levels of complex quantum systems, [1], [2], [3]. In the early eighties it has enjoyed renewed interest since it has been recognized as a very useful tool in the study of numerous physical systems. Specically, it is very useful in the analysis of chaotic quantum systems. In fact, in the last years many papers appeared about the problem of quantum chaos which implies the quantization of systems whose underlying classical dynamics is irregular (i.e. chaotic). The simplest models considered in this eld are billi- ards of various shapes. From the the classical point of view, a point particle in a 2-dimensional billiard displays regular or irregular motion depending on the shape of the billiard; for instance motion in a rectangular or circular billi- ard is regular thanks to the symmetries of the boundary. On the other hand, billiards of arbitrary shapes imply chaotic motion, i.e. exponential diver- gence of initially nearby trajectories. In order to study quantum billiards we have to consider the Schroedinger equation in various 2-dimensional domains. The eigenvalues of the Schroedinger equation represent the allowed energy levels of our quantum particle in the billiard under consideration, while the eigenfunction norms represent the probability density of nding the particle in a certain position. The question of quantum chaos is whether the charac- ter of the classical motion (regular or chaotic) can in uence some properties KW - Quantenphysik KW - Quaternion Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5029 ER - TY - JOUR A1 - Routmann, Y. L. T1 - Pseudorigidity method for solving the problem of limit equilibrium of rigid-plastic constructions N2 - 1.Design calculations , based upon the theory elasticity , cannot completely satisfy engineers and designers , because cannot answer to basic question about overload capability . Only design calculations of limit equilibrium of rigid-plastic constructions can answer to this question completely enough. As a rule , such design calculations are made issue from hypothesis, that material of construction has rigid-plastic diagram Prandtl .This scheme of calculation gives qualitatively more correct results, then usual calculation, based upon law Hooke’s , and allows more really estimate ultimate strength of construction due to different loads. Universal algorithms for solving the problem of limit equilibrium have been created since the middle of the 60’s.These algorithms are based upon two basic theorems about limit analysis - static and kinetics. It was found , that with the help of above-mentioned theorems the problem of limit equilibrium can be formulated as a problem of linear programming (for linear yield) or nonlinear programming (for yield Guber-Mizes). The method of linear programming conformably to calculation of rod systems got the most development in the reports Prager W. [1] and Chiras A. [ 2 ]. The method of linear programming conformably to plates and shells was widely used by Rganizin A.[3]. [3[ contains more full bibliography about this problem. Calculation of limit equilibrium with the help of linear and nonlinear programming has a few significant lacks: - complexity and laboriousness preliminary preparation of problem for PC; - necessity to use special program means , which are not in usual program packet for strength analysis. Author worked out a new method about design calculation of limit equilibrium without above-mentioned lacks . The method is based upon analogy of relations between internal generalized efforts and generalized deformations in elastic system and between generalized efforts and velocities of change generalized deformations in rigid-plastic system. Because later rigid-plastic deformation would be treated as an elastic deformation in the system with special constructed rigidities , this method could be called >pseudorigidity method<. KW - Plastizitätstheorie KW - Gleichgewicht KW - Grenzzustand Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5447 ER - TY - CHAP A1 - Menzel, Karsten A1 - Garrett, James H. A1 - Mahdavi, A. A1 - Ries, R. T1 - Processing "fuzzy" materials sets for environmental impact analysis of buildings N2 - Processing technical and environmental data on building materials, components, and systems has become more important during the last few years. Increased sensitivity towards environmental and energy problems has lead to the demand for simulation and evaluation of the long term behavior of buildings. The results of such simulations are expected to enable architects and engineers to develop a broader, interdisciplinary understanding of the impact of their products (buildings) on the environment. However, conducting such evaluations is currently hampered by the lack of comprehensive, up-to-date, and ecologically relevant data on building materials, components, and systems. To address this problem, this paper proposes an approach to deal with the absent or uncertain attributes of building materials, components, and systems. In the past, various information systems have been developed to provide data on a limited set of building materials, including precise values pertaining to some of their characteristics, such as availability, manufacturers, costs, etc. These traditional information systems have difficulty in dealing with uncertain, incomplete and sparse data. However, uncertainty and incompleteness characterize the nature of most of the available and environmentally related characteristics of materials, components, and systems. In this paper, a fuzzy-logic-based augmentation of traditional information systems is proposed towards providing management, utilization and manipulation of incomplete and uncertain data. KW - Bauwerk KW - Umweltfaktor KW - CAD KW - Fuzzy-Logik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4500 ER - TY - JOUR A1 - Kaplinski, O. T1 - Phenomenon of inhertia in the Production Systems reliability Analysis N2 - The paper analyses the influence of the effect of inertia on the reliability of production systems. Systems inertia represents the phenomenon of continuing work for some time after the breakdown of one of the former phases. In our considerations, inertia is treated as the time elapsed from the onset of breakdown till the system's inability to work. A special method had to be devised to investigate the effect of inertia in order to evaluate the reliability of production systems and to attempt algorithmization to control the reliability of production system by means of inertia or reserving. The method of reliability analysis is presented only in an inform aspect. The possibilities of increasing reliability of production systems are listed. A comparison of the redundancy method and inertia method is presented. The results of this comparison and simulated investigations of influence of inertia on reliability of system are essential scope of the paper. Selected conclusions are as follows: when inertia approaches the last phase in the system, its influence on the shape of the distribution of the system's ability increases; an increase in inertia causes an increase in the availability of the system which approaches a certain border value; dependence of the average of a system's disability on inertia has a saddle-like character whereas dependence of the number of breakdowns (stoppages) in the system has the nature of an S-curve. KW - Zuverlässigkeitstheorie KW - Trägheit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5320 ER - TY - JOUR A1 - Hering, F. T1 - Penrose-Pflasterungen in der Architektur - die künstlerische Umsetzung eines mathematischen Modells im Gemeindeverwaltungs-Zentrum von Bütgenbach, Belgien N2 - Der englische Physiker und Mathematiker Roger Penrose hat eine mathematische Pflasterung entdeckt, deren Formenreichtum neue Impulse in der Architektur setzen kann. In der Gemeinde Bütgenbach im Hohen Venn, Belgien, wurde das Verwaltungszentrum durch den Essener Architekten Ernst Burghartz mit mehrereren Penrose-Pflasterungen versehen. Diese beruhen auf einem Computer-Programm, welches der Vortragende zusammen mit Dr. Frank Martini entwickelt hat. Herr Burghartz hat jedoch diesen Vorentwurf nach seinen künstlerischen Vorstellungen abgewandelt. KW - Anwendung KW - Architektur KW - Pflasterungen (Mathematik) Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5247 ER - TY - JOUR A1 - Lämmer, Lutz A1 - Burghardt, Michael A1 - Meißner, Udo F. T1 - Parallele Netzgenerierung N2 - Bei der Berechnung von statischen oder dynamischen Problemen mit Hilfe der Methode der Finiten Elemente ist eine Diskretisierung des zu berechnenden Gebietes notwendig. Bei einer sinnvollen Modellierung des Gebietes ist die Elementgröße meist nicht konstant, sondern ist an kritischen Stellen kleiner. Die Vorgaben hierfür können einerseits aus Erfahrungen des Anwenders, andererseits aus einer Fehlerabschätzung einer vorangegangenen FE-Berechnung resultieren [5]. Soll die FE-Berechnung auf einem Parallelrechner geschehen, ist eine Partitionierung des Gebietes, d.h. eine Zuordnung der Elemente zu den Prozessoren, notwendig. Bei dem hier beschriebenen Ansatz werden nun im Gegensatz zu den üblichen Verfahren erst die Eingangsdaten für den Netzgenerator umgewandelt und dann das Elementnetz direkt auf dem Parallelrecher gleichzeitig auf allen Prozessoren erzeugt. Eine Aufteilung der Elemente auf die Prozessoren entsteht als Nebenprodukt der Netzaufteilung. Die entstehenden Teilgebietsgrenzen werden geometrisch minimiert. Die Lastbalance der Netzaufteilung sowie der FE-Rechnung wird durch ein annähernd gleiche Anzahl der Elemente je Partition gewährleistet. Als Eingabedaten wird eine Beschreibung des Gebietes durch Polygonzüge, sowie einer Netzdichtefunktion, z.B. durch Punkte mit Angaben über die angestrebte Elementgröße, benötigt. KW - Finite-Elemente-Methode KW - Gittererzeugung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5315 ER - TY - JOUR A1 - Zhak, S. V. A1 - Sidorenko, V. S. T1 - Optimized Models of Modes Choice for Displacement of technical Systems Objects N2 - The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated. KW - Modellierung KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5347 ER - TY - CHAP A1 - Schelle, H. T1 - Operations Research and Projektmanagement: kritischer Rückblick und Zukunftsperspektiven N2 - Anwendungen der Methoden des Operations Research in der Praxis des Projektmanagements sind so gut wie kaum zu finden. Diese Anwendungslücke ist umso erstaunlicher, als es eine große Zahl von theoretischen Veröffentlichungen zum Themenkreis >Operations Research und Projektmanagement< gibt . Der Beitrag arbeitet die verschiedenen Ursachen für die bislang geringe praktische Relevanz der Disziplin >Operations Research< heraus und macht Vorschläge, wie in Zukunft anwendungsfreundlichere Modelle entwickelt werden können. KW - Projektmanagement KW - Operations Research Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4227 ER - TY - JOUR A1 - Kähler, Uwe T1 - On the solution of spatial generalizations of Beltrami equations N2 - With the help of functional analytical methods complex analysis is a powerful tool in treating non-linear first-order partial differential equations in the plane. Some of the most important of these equations are the Beltrami equations. This is due to the fact that the theory of Beltrami systems is related to many problems of geometry and analysis, like non-linear subsonic two-dimensional hydrodynamics, problems of conformal and quasiconformal mappings of two-dimensional Riemannian manifolds, or complex analytic dynamics. The theory of Beltrami equations is strongly connected with the -operator. This singular integral operator is immediately recognized as two-dimensional Hilbert-transform, known also under the name of integral operator with Beurling kernel, acting as an isometry of L2(C) onto L2(C). In hypercomplex function theory the Beltrami equations have not yet this importance, but nevertheless, they are a basic condition for the transfer of complex methods and efforts for solving partial differential equations, especially of non-linear type, to the spatial case. Here we deal with hypercomplex Beltrami systems. For this we restrict ourselves to the quaternionic case, but without any loss of generality. We will show how a spatial generalization of the complex -operator can be used to solve systems of non-linear partial differential equations, in particular different types of spatial Beltrami systems. Also, the for practical purposes so important norm estimates will be derived. Some of our results are stronger as known results in the complex case, but they are applicable in the complex situation, too. KW - Beltrami-Gleichung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5018 ER - TY - JOUR A1 - Salpagarova, A. A. A1 - Temirbulatov, P. I. T1 - On one systemic Development of the Problem of Allocation N2 - Problem of discretic programming in conditions of manycriterial is considered. Set of work, being subject to fulfilment, is available. Are certain also: set of the executors; set, machines; set of resources (materials, semifinished items and etc.) and other set. As a functional complex name set, which will be formed, when on one representative of each of the specified sets is nominated to one working place. The allowable decision of a examined problem represents set of not crossed complexes provided that, for each working place one functional complex is certain in the accuracy. The elementary case of a formulated above problem is known under the name >a problem about purposes< [1], when the complex is defined as a pair >an executor - working place<. In case of three-element complexes we come to a problem about three-combinations. In a general case the complex consists from m of elements and the problem of formation of m-element complexes is formulated on the m-colour column. KW - Entscheidung bei mehrfacher Zielsetzung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5431 ER - TY - JOUR A1 - Werkle, Horst A1 - Hansen, R. A1 - Röder, J. T1 - Object oriented databases in software development for structural analysis N2 - A technique for using object-oriented technologies to write structural analysis software has been developed. The structural design information of an individual building is stored in an object-oriented database. A global database provides general design values as material data and safety factors. A class library for load elements has been evolved to model the transfer of loads in a building. This class library is the basis for the development of further classes for other structural elements such as beams, columns or slabs. A software has been developed to monitor the forces transferred from one structural member to another in a building for load cases and combinations according to Eurocode 1. The results of the analysis are stored in the projects database from which a structural design report may be generated. The software was developed under Microsoft Visual C++. The Microsoft Foundation Class Library (MFC) was used to program the Graphical User Interface (GUI). Object Linking and Embedding (OLE) technology is useful to include any type of OLE server objects for example texts written with a word processor or CAD drawings in the structural design report. The Object-Oriented Database Management System (OODBMS) ObjectStore provides services to store the large amount of objects. KW - Baustatik KW - Objektorientiertes Datenbanksystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4599 ER - TY - JOUR A1 - Schreier, H. T1 - Näherungsverfahren zur Lösung eines Transportproblems der diskreten Schüttgutoptimierung N2 - Gegenstand der Betrachtung ist ein spezielles Tourenproblem der Schüttgutoptimierung. Man stelle sich als Realitätsbezug ein Transportunternehmen vor, das eine Anzahl von gleichartigen Fahrzeugen in einem Fuhrpark stationiert hat. Vorgegebene Mengen von Schüttgut müssen von einer Kiesgrube zu mehreren Baustellen transportiert werden. Dabei sind Be- und Entladezeiten, unterschiedliche mittlere Geschwindigkeiten für Leer- bzw. Lastfahrten und Schichtzeiten zu berücksichtigen. Gesucht ist eine optimale Anzahl von einzusetzenden Fahrzeugen und die zugehörigen Tourenpläne mit dem Ziel der Minimierung der Transportkosten unter Beachtung der Lieferverträge. Die Lösung des Problems erfolgt in zwei Phasen. Zuerst wird die Frage geklärt, wieviele Fahrzeuge bei minimalem Kostenniveau einzusetzen und welche zu den Leerfahrten gehörigen Teilstrecken wie oft zu befahren sind. Anschließend wird mit heuristischen Verfahren versucht, die Menge der zu fahrenden Teilstrecken so auf die Fahrzeuge aufzuteilen, daß für jedes Fahrzeug eine zulässige Tour entsteht. Zur komplexen Lösung einer denkbaren Aufgabe liegt ein Programm in der Programmiersprache PASCAL vor. Die erzielten numerischen Resultate belegen, daß auch für Probleme größerer Dimension eine Optimallösung oder sehr gute Näherungen in vernünftiger Zeit gefunden werden. KW - Transportproblem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5195 ER - TY - CHAP A1 - Raue, Erich A1 - Diener, Jörg T1 - Numerische Analyse des Langzeitverhaltens hochbeanspruchter Druckglieder unter Berücksichtigung des nichtlinearen Kriechens mit Hilfe der quadratischen Optimierung N2 - Bei der Berechnung von Stahlbeton- bzw. Spannbetonkonstruktionen müssen die Zusatzverformungen infolge Kriechen und Schwinden des Betons unter anderem dann berücksichtigt werden, wenn durch sie der Schnittgrößenzustand des Gesamttragwerks bzw. einzelner Tragwerksteile ungünstig verändert wird. Das trifft vor allem auf schlanke Druckglieder zu. Die Ermittlung der Kriechausmitte erfolgt im allgemeinen unter Zugrundelegung einer Kriechzahl, die vom Beanspruchungsniveau des Betons unabhängig ist. Diese Annahme ist unzulässig, wenn die Betonspannungen oberhalb des Gebrauchslastniveaus (>30..50% der Druckfestigkeit) liegen, da in diesem Bereich die Kriechdehnungen überproportional zu den kriecherzeugenden Spannungen anwachsen (nichtlineares Kriechen). Theoretische Untersuchungen zum Tragverhalten hochbeanspruchter Stahlbetonstützen unter Berücksichtigung des nichtlinearen Kriechens sind aufgrund der Komplexität des Problems und dem damit verbundenen Berechnungsaufwand gegenwärtig in nur geringem Umfang vorhanden. Im vorliegenden Beitrag wird ein Algorithmus vorgestellt, bei dem die Ermittlung der Schnittgrößen und Deformationen auf die sukzessive Lösung quadratischer Optimierungsaufgaben für im voraus festgelegte Betrachtungszeitpunkte zurückgeführt wird, wobei die Ergebnisse der vorangegangenen Zeitpunkte Eingangswerte für die Berechnung darstellen. Die Berücksichtigung der Nichtlinearität des Kriechens unter hoher Spannung sowie geometrisch nichtlinearer Effekte erfolgt iterativ innerhalb jedes Betrachtungszeitpunkts. Mit der Einführung von Spannungsbegrenzungen als zusätzliche Nebenbedingungen können in jeder Iteration Materialplastizierungen, Rißbildungen des Betons bzw. >tension stiffening<-Effekte ohne prinzipielle Veränderung des mathematischen Modells berücksichtigt werden. Durch Nachrechnung von Langzeitversuchen an Stahlbetonstützen erfolgt die Verifikation des Berechnungsmodells KW - Bauteil KW - Stahlbeton KW - Druckbelastung KW - Langzeitverhalten KW - Kriechen KW - Nichtlineares Phänomen KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4415 ER - TY - CHAP A1 - Kirichuk, A. A1 - Köppler, H. T1 - Numerical Algorithms and Computer Modeling for nonlinear Analysis of Shell Structures N2 - The dynamic behaviour of shells, which are widely used in construction and mechanical engineering as critical components of machinery and 3-D structures, under static and dynamic loadings is described by system of deep nonlinear differential equations. Solution of these equations can be received with assistance of technique basing on a modern numerical algorithms and computer modeling.. The system of nonlinear differential equations of vibration of the shells is proposed taking into account the inertia forces in the tangential and normal directions. Its solution is based on combination of parameter prolongation method, finite-difference method and the Newton-Kantorovich iterative algorithm that allows plotting the loading trajectories and determination of bifurcation points on them. Package of Applied Programs >SEVSOR< is a computation means to be used in research of deformation, stability and vibration in thin axically-symmetric shells of complicated shape Input data include information on shell geometry, physical and mechanical properties, bearing conditions, types of loadings and load application. Frame output of motion forms in real time or either in decelerated or accelerated time scales for creating cartoons or video films is used for analysis of the compound dynamic processes in shell-type structures. KW - Schale KW - Nichtlineares Phänomen KW - Modellierung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4382 ER - TY - JOUR A1 - Semenov, Artem A1 - Melnikov, B. E. T1 - Multimodel Numerical Analysis of the Elasto-Visco-Plastic Deformation of Materials and Constructions N2 - At the present time there is no a generally accepted theory of visco-plasticity which is applicable for a wide class of materials and arbitrary paths of loading. The multimodel approach, based on the creation of hierarchical sequence of the models, is the most rational. The developed library of elasto-visco-plastic models includes both simplest and sophistic models demanding numerous experimental data. A unified general form of constitutive equations for all used elasto-visco-plastic models are presented based upon the concept of tensorial internal state variables. It permits to use unified algorithm of boundary tasks solution for different variants of material models. The developed selection criteria system generates the necessary conditions and provides the choice of the simplest variant of theory sufficient for correct problem solution. Formulation of the selection criteria system is based on peculiarities of viscoplastic materials behavior for the wide range thermomechanical loading and numerous computational experiments with structures different complexity levels. A set of effective schemes of integration stress-strain relations and non-linear finite element system solution are discussed for the considered class of material models. Application possibility of different material models is studied both for material element and for complicated structures. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined loading. KW - Stoffgesetz KW - Elastoplastizität KW - Viskoplastizität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5282 ER - TY - JOUR A1 - Rüppel, Uwe T1 - Multimediale Gestaltung von Bestandsverwaltungsprozessen im Bauwesen N2 - Die Kosten für die Unterhaltung von Bauwerken über den Lebenszyklus sind im Vergleich zu den Planungs- und Herstellungskosten erheblich größer. Insbesondere setzt eine Reduzierung des Instandhaltungsaufwandes als Teilprozeß der Bestandsverwaltung das rechtzeitige Erkennen von Bauschäden und das vorausschauende Ergreifen von Gegenmaßnahmen voraus. Das planmäßige Vorgehen beim Erkennen von Bauschäden, d.h. die regelmäßige Überwachung baulicher Anlagen, dient nicht nur dem sparsamen Umgang mit vorhandenen Mitteln, sondern verringert auch die Gefahr des plötzlichen Versagens von tragenden Bauteilen. Dadurch werden Gefahren für die Nutzer der Bauwerke frühzeitig abgewendet. Die Notwendigkeit der systematischen Instandhaltung mit modernen Methoden wird auch in den Schlußfolgerungen des dritten Bauschadensberichts des Bundesministeriums für Raumordnung, Bauwesen und Städtebau unterstrichen. Um den Zustand eines Bauteils festzustellen, werden ausreichende Informationen über Struktur, Material, Alter, Belastungen, Umweltbedingungen etc. benötigt. Zur Verarbeitung dieser Fülle von Informationen unterschiedlichen Typs (z.B. technische Dokumente, CAD-Zeichnungen, Photos etc.) bei der Überwachung und Dokumentation baulicher Anlagen ist eine geeignete DV-Unterstützung notwendig. Zur Verwaltung der komplexen Baustrukturinformationen werden objektorientierte Bauwerksmodelle benötigt. Zur bedarfsgerechten Aufbereitung der unterschiedlichen Informationsarten und -qualitäten ist zusätzlich eine multimediale Informationsverarbeitung sowohl intern als auch in der Benutzungsschnittstelle erforderlich. Im Beitrag werden die Grundlagen objektorientierter Methoden zur Bauwerksmodellierung sowie von Multimedia mit den Bereichen Text, Graphik (Vektor- und Pixelgraphik), Audio, Photo und Video einschließlich deren Verknüpfungsmöglichkeiten im Sinne von Hypermedia an Beispielen erläutert. Zusätzlich werden aktuelle Entwicklungstendenzen im Bereich der Telekommunikation mit den Möglichkeiten des Computernetzes INTERNET zur Bestandsverwaltung in verteilten Systemen aufgezeigt. Abschließend werden Anwendungen der objektorientierten und multimedialen Informationsverarbeitung in der täglichen Ingenieurpraxis am Beispiel des DV-Systems BestandManager zur Überwachung und Dokumentation baulicher Anlagen vorgestellt. KW - Bauwerk KW - Langzeitverhalten KW - Bauschaden KW - Instandhaltung KW - Objektmodell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4839 ER - TY - JOUR A1 - Kochkarov, A. M. A1 - Popova, E. V. A1 - Zinchenko, O. A. T1 - Multicriteria problems of regulation when planning building processes N2 - In the rpocess of project construction organization under conditions of limited resources the problem of investor arises, which in onecriteria setting is as follows N invsted projects reindexed i=1,2,...,n are considered, initial parameters of the problem are:- duraion of iproject construction, - expected profit per unit of time from i project after putting it info operation ,-the time fixed , after the expiry of it a fine is paid for each overdued unit of time units in number. The investor resources are limited, i.e., at every moment of time investor can provid delivering of necessary resources only for one project .Any admissible problem decision of investor represents one of n! permutation of of numbers 1,2,..,n. X={x}-is the set of all admissible solutions (SAS) of this problem . In works of different authors the quality of decision is evaluated either by objective function (OF) of the type MINSUM where,by the objective function of the of the type MINMAX Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5454 ER - TY - CHAP A1 - Zoller, J. A1 - Maltret, J.-L. A1 - Poutrain, K. T1 - Models generation : from urban simulation to virtual reality N2 - The aim of researches conducted within gamsau about urban simulation, in particular Remus project, is to allow rapid modeling of large and regular urban zones, for purpose of interactive navigation (like VRML) or for realistic rendering (ray-tracing methods). One of problems to be solved in this context is the multiplicity of data formats : inputs come from different sources, and outputs are for heterogeneous systems of visualization. Typically CSG and boundary representation must be generated, treated and converted during building of models. Furthermore, the generated models can be more or less refined, depending on requests and type of use. This paper describes the general context of data models conversion, problems concerning levels of detail and implementation done in Remus, based on object oriented approach. KW - Stadtplanung KW - Objektmodell KW - Virtuelle Realität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4498 ER - TY - CHAP A1 - Diaz, Joaquin A1 - Meißner, Udo F. A1 - Schönenborn, I. T1 - Modellierung zeitabhängiger 3D-Modelle in der Geotechnik N2 - Aufgrund der steigenden quantitativen und qualitativen Anforderungen an den Bauplanungsprozeß wird in den letzten Jahren nach neuen Lösungsansätzen gesucht, mit deren Hilfe der Bauplanungsprozeß den gestiegenen Anforderungen angepaßt werden kann. Ein Lösungsansatz hierzu stellt die durchgängig computergestützte, dreidimensionale und zeitabhängige Modellierung und Verwaltung des Bauplanungsprozesses beginnend bei der Vorplanung bis hin zum Recycling des Bauobjektes am Ende seiner Lebensdauer dar. Der vorliegende Beitrag zeigt auf, daß gerade der zeitliche Verlauf innerhalb einer geotechnischen Aufgabenstellung einen nicht unerheblichen Einfluß auf die verwendeten Modelle bzw. die Durchführung von Sicherheitsnachweisen ausübt. Für die Entwicklung geotechnischer Softwaresysteme ergibt sich daraus schon innerhalb der Analysephase die Anforderung, die zeitkritischen Abhängigkeiten zu modellieren und entsprechend im Entwurf zu berücksichtigen. Hierfür hat sich die objektorientierte Methode in Form des Objektmodells und des dynamischen Modells nach Rumbaugh als ein geeignetes Werkzeug herausgestellt. Die dabei gewonnenen Erkenntnisse und Ergebnisse können bereits sehr früh in die Konzeption des Gesamtsystems mit einbezogen werden. Am Beispiel des Geotechnischen Informationssystems (GTIS) führte dies zu einer raum- und zeitabhängigen Verwaltung des Boden- und Konstruktionsmodells und zu einer Bauablaufsteuerung, innerhalb derer die einzelnen Bauzustände verwaltet und mit den entsprechenden Ausprägungen innerhalb des dreidimensionalen Boden- und Konstruktionsmodells verknüpft werden können. KW - Geotechnik KW - Zeitabhängigkeit KW - Dreidimensionales Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4324 ER - TY - JOUR A1 - Dudek, Mariusz T1 - Modellierung der Verkehrsmittelwahl N2 - Die Zielstellung der Modal­Split­Betrachtungen läuft darauf hinaus, Entscheidungs-kriterien zu erarbeiten, nach denen die einzelnen Personen ihre Verkehrsmittel auswählen. In dieser Veröffentlichung wurden alle drei Gruppen der Modelle (klassische, verhaltensorientierte und der Analyse) der Verkehrsaufteilung kurz charakterisiert. Dann wurden vier ausgewählte Modelle genauer beschrieben. Zum Schluß wird das Modell der Verkehrsmittelwahl dargestellt , das für die Untersuchung der Verkehrsaufteilung in Krakau verwendet wurde . KW - Verkehrsmittelwahl KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4817 ER -