TY - JOUR A1 - Savaidis, G. A1 - Vormwald, Michael T1 - Hot-spot stress evaluation of fatigue in welded structural connections supported by finite element analysis JF - International Journal of Fatigue N2 - Hot-spot stress evaluation of fatigue in welded structural connections supported by finite element analysis KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2000 SP - 85 EP - 91 ER - TY - JOUR A1 - Hoffmeyer, J. A1 - Döring, R. A1 - Vormwald, Michael T1 - Kurzrisswachstum bei mehrachsig nichtproportionaler Beanspruchung JF - Materialwissenschaft und Werkstofftechnik N2 - Kurzrisswachstum bei mehrachsig nichtproportionaler Beanspruchung KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2001 SP - 329 EP - 336 ER - TY - JOUR A1 - Savaidis, G. A1 - Schliebner, R. A1 - Vormwald, Michael T1 - Lebensdauerermittlung von geschweißten, mehrachsig belasteten Nutzfahrzeugkomponenten - Vergleich von Schwingfestigkeiten aus Rechnung und Versuch bei nichtproportionaler Beanspruchung JF - Materialprüfung N2 - Lebensdauerermittlung von geschweißten, mehrachsig belasteten Nutzfahrzeugkomponenten - Vergleich von Schwingfestigkeiten aus Rechnung und Versuch bei nichtproportionaler Beanspruchung KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2001 SP - 381 EP - 386 ER - TY - JOUR A1 - Bucher, Christian A1 - Ebert, Matthias T1 - Nichtlineare Berechnung von Stahlflanschverbindungen mit gemessenen Imperfektionen JF - Stahlbau N2 - Nichtlineare Berechnung von Stahlflanschverbindungen mit gemessenen Imperfektionen KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2002 SP - 516 EP - 522 ER - TY - JOUR A1 - Thumser, Rayk A1 - Bergmann, Joachim W. A1 - Vormwald, Michael T1 - Residual stress fields and fatigue analysis of autofrettaged parts JF - International Journal of Pressure Vessels and Piping N2 - Residual stress fields and fatigue analysis of autofrettaged parts KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2002 SP - 113 EP - 117 ER - TY - JOUR A1 - Döring, R. A1 - Hoffmeyer, J. A1 - Seeger, T. A1 - Vormwald, Michael T1 - Verformungsverhalten und rechnerische Abschätzung der Ermüdungslebensdauer metallischer Werkstoffe unter mehrachsig nichtproportionaler Beanspruchung JF - Materialwissenschaft und Werkstofftechnik N2 - Verformungsverhalten und rechnerische Abschätzung der Ermüdungslebensdauer metallischer Werkstoffe unter mehrachsig nichtproportionaler Beanspruchung KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2002 SP - 280 EP - 288 ER - TY - JOUR A1 - Kirichuk, A. A1 - Most, Thomas A1 - Bucher, Christian T1 - Numerical nonlinear analysis of kinematically excited shells JF - International Journal for Computational Civil and Structural Engineering N2 - Numerical nonlinear analysis of kinematically excited shells KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2003 SP - 61 EP - 74 ER - TY - JOUR A1 - Savaidis, G. A1 - Savaidis, A. A1 - Schliebner, R. A1 - Vormwald, Michael T1 - Evaluation of fatigue of fillet welded joints in vehicle components under multiaxial service loads JF - European Structural Integrity Society N2 - Evaluation of fatigue of fillet welded joints in vehicle components under multiaxial service loads KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2003 SP - 23 EP - 42 ER - TY - JOUR A1 - Döring, R. A1 - Hoffmeyer, J. A1 - Seeger, T. A1 - Vormwald, Michael T1 - A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading JF - Computational Materials Science N2 - A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2003 SP - 587 EP - 596 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian A1 - Schorling, York T1 - Dynamic stability analysis of non-linear structures with geometrical imperfections under random loading JF - Journal of Sound and Vibration N2 - Dynamic stability analysis of non-linear structures with geometrical imperfections under random loading KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2004 SP - 381 EP - 400 ER - TY - JOUR A1 - Unger, Jörg F. A1 - Teughels, A. A1 - De Roeck, G. T1 - Damage detection of a prestressed concrete beam using modal strains JF - Journal of Structural Engineering N2 - Damage detection of a prestressed concrete beam using modal strains KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 1456 EP - 1463 ER - TY - JOUR A1 - Bruhin, R. A1 - Stock, U.A. A1 - Drücker, J.-P. A1 - Azhari, T. A1 - Wippermann, J. A1 - Albes, J.M. A1 - Hintze, D. A1 - Eckardt, Stefan A1 - Könke, Carsten A1 - Wahlers, T. T1 - Numerical simulation techniques to study the structural response of the human chest following median sternotomy JF - The Annals of Thoracic Surgery N2 - Numerical simulation techniques to study the structural response of the human chest following median sternotomy KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 623 EP - 630 ER - TY - JOUR A1 - Bucher, Christian A1 - Pham, Hoang Anh T1 - On model updating of existing structures utilizing measured dynamic responses JF - Structure and Infrastructure Engineering N2 - On model updating of existing structures utilizing measured dynamic responses KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 135 EP - 143 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - A moving least squares weighting function for the element-free Galerkin method which almost fulfills essential boundary conditions JF - Structural Engineering and Mechanics N2 - A moving least squares weighting function for the element-free Galerkin method which almost fulfills essential boundary conditions KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 315 EP - 332 ER - TY - JOUR A1 - Zabel, Volkmar T1 - An application of discrete wavelet analysis and connection coefficients to parametric system identification JF - Structural Health Monitoring N2 - An application of discrete wavelet analysis and connection coefficients to parametric system identification KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 5 EP - 18 ER - TY - JOUR A1 - Zerbst, U. A1 - Vormwald, Michael A1 - Andersch, C. A1 - Mädler, K. A1 - Pfuff, M. T1 - The development of a damage tolerance concept for railway components and its demonstration for a railway axle JF - Engineering Fracture Mechanics N2 - The development of a damage tolerance concept for railway components and its demonstration for a railway axle KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 209 EP - 239 ER - TY - JOUR A1 - Häfner, Stefan A1 - Eckardt, Stefan A1 - Luther, Torsten A1 - Könke, Carsten T1 - Mesoscale modeling of concrete: Geometry and numerics JF - Computers and Structures N2 - Mesoscale modeling of concrete: Geometry and numerics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2006 SP - 450 EP - 461 ER - TY - JOUR A1 - Kaltenbacher, Barbara A1 - Lahmer, Tom A1 - Mohr, Marcus A1 - Kaltenbacher, Manfred T1 - PDE based determination of piezoelectric material tensors JF - European Journal of Applied Mathematics N2 - PDE based determination of piezoelectric material tensors. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2006 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3595 SP - 383 EP - 416 ER - TY - JOUR A1 - Unger, Jörg F. A1 - Teughels, A. A1 - De Roeck, G. T1 - System identification and damage detection of a prestressed concrete beam JF - Journal of Structural Engineering N2 - System identification and damage detection of a prestressed concrete beam KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2006 SP - 1691 EP - 1698 ER - TY - JOUR A1 - Bucher, Christian A1 - Frangopol, D.M. T1 - Optimization of lifetime maintenance strategies for deteriorting structures considering probabilities of violating safety, condition, and cost thresholds JF - Probabilistic Engineering Mechanics N2 - Optimization of lifetime maintenance strategies for deteriorting structures considering probabilities of violating safety, condition, and cost thresholds KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2006 SP - 1 EP - 8 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - Stochastic simulation of cracking in concrete structures using multi-parameter random fields JF - International Journal of Reliability and Safety N2 - Stochastic simulation of cracking in concrete structures using multi-parameter random fields KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2006 SP - 168 EP - 187 ER - TY - JOUR A1 - Macke, M. A1 - Higuchi, Shoko T1 - Optimizing maintenance interventions for deteriorating structures using cost-benefit criteria JF - Journal of Structural Engineering N2 - Optimizing maintenance interventions for deteriorating structures using cost-benefit criteria KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 925 EP - 934 ER - TY - JOUR A1 - Higuchi, Shoko A1 - Macke, M. T1 - Cost-benefit based optimization of maintenance interventions for deteriorating structures JF - Structural Engineering/Earthquake Engineering N2 - Cost-benefit based optimization of maintenance interventions for deteriorating structures KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 131 EP - 147 ER - TY - JOUR A1 - Higuchi, Shoko A1 - Macke, M. T1 - Cost-benefit based optimization of maintenance interventions for deteriorating structures JF - Doboku Gakkai Ronbunshuu A N2 - Cost-benefit based optimization of maintenance interventions for deteriorating structures KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 727 EP - 743 ER - TY - JOUR A1 - Unger, Jörg F. A1 - Eckardt, Stefan A1 - Könke, Carsten T1 - Modelling of cohesive crack growth in concrete structures with the extended finite element method JF - Computer Methods in Applied Mechanics and Engineering N2 - Modelling of cohesive crack growth in concrete structures with the extended finite element method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 4087 EP - 4100 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - Energy-based simulation of concrete cracking using an improved mixed-mode cohesive crack model within a meshless discretization JF - International Journal for Numerical and Analytical Methods in Geomechanics N2 - Energy-based simulation of concrete cracking using an improved mixed-mode cohesive crack model within a meshless discretization KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 285 EP - 305 ER - TY - JOUR A1 - Most, Thomas T1 - A natural neighbour-based moving least-squares approach for the element-free Galerkin method JF - International Journal for Numerical Methods in Engineering N2 - A natural neighbour-based moving least-squares approach for the element-free Galerkin method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 224 EP - 252 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - Probabilistic analysis of concrete cracking using neural networks and random fields JF - Probabilistic Engineering Mechanics N2 - Probabilistic analysis of concrete cracking using neural networks and random fields KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 219 EP - 229 ER - TY - JOUR A1 - Lahmer, Tom A1 - Kaltenbacher, Barbara A1 - Schulz, V. T1 - Optimal measurement selection for piezoelectric material tensor identification JF - Inverse Problems in Science and Engineering N2 - Optimal measurement selection for piezoelectric material tensor identification. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2008 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3593 SP - 369 EP - 387 ER - TY - JOUR A1 - Eckardt, Stefan A1 - Könke, Carsten T1 - Adaptive damage simulation of concrete using heterogeneous multiscale models JF - Journal of Algorithms & Computational Technology N2 - Adaptive damage simulation of concrete using heterogeneous multiscale models KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 SP - 275 EP - 297 ER - TY - JOUR A1 - Unger, Jörg F. A1 - Könke, Carsten T1 - Coupling of scales in a multiscale simulation using neural networks JF - Computers & Structures N2 - Coupling of scales in a multiscale simulation using neural networks KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 ER - TY - JOUR A1 - Higuchi, Shoko A1 - Macke, M. T1 - Cost-benefit analysis for the optimal rehabilitation of deteriorating structures JF - Structural Safety N2 - Cost-benefit analysis for the optimal rehabilitation of deteriorating structures KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 SP - 291 EP - 306 ER - TY - JOUR A1 - Most, Thomas A1 - Ishii, H. A1 - Geng, X. A1 - Bolzern, P. A1 - Colaneri, P. A1 - De Nicolao, G. T1 - Discussion on Almost sure stability of stochastic linear systems with ergodic parameters JF - European Journal of Control N2 - Discussion on Almost sure stability of stochastic linear systems with ergodic parameters KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 SP - 124 EP - 130 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - New concepts for moving least squares: An interpolating non-singular weighting function and weighted nodal least squares JF - Engineering Analysis with Boundary Elements N2 - New concepts for moving least squares: An interpolating non-singular weighting function and weighted nodal least squares KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 SP - 461 EP - 470 ER - TY - JOUR A1 - Bucher, Christian A1 - Most, Thomas T1 - A comparison of approximate response functions in structural reliability analysis JF - Probabilistic Engineering Mechanics N2 - A comparison of approximate response functions in structural reliability analysis KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 SP - 154 EP - 163 ER - TY - JOUR A1 - Zabel, Volkmar A1 - Brehm, Maik T1 - Das dynamische Verhalten von Eisenbahnbrücken mit kurzer Spannweite - numerische und experimentelle Untersuchungen JF - Bauingenieur, D-A-CH-Mitteilungsblatt N2 - Das dynamische Verhalten von Eisenbahnbrücken mit kurzer Spannweite - numerische und experimentelle Untersuchungen KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 ER - TY - JOUR A1 - Lahmer, Tom A1 - Kaltenbacher, Manfred A1 - Kaltenbacher, Barbara A1 - Lerch, Reinhard A1 - Leder, Erich T1 - Fem-based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials JF - IEEE transactions on ultrasonics, ferroelectrics, and frequency control N2 - Fem-based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2008 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3594 ER - TY - JOUR A1 - Hauck, A. A1 - Lahmer, Tom A1 - Kaltenbacher, Manfred T1 - Enhanced homogenization technique for magnetomechanical systems using the generalized finite element method JF - COMPEL: The international journal for computation and mathematics in electrical and electronic engineering N2 - Enhanced homogenization technique for magnetomechanical systems using the generalized finite element method KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2009 SP - 935 EP - 947 ER - TY - JOUR A1 - Lahmer, Tom T1 - Modified Landweber iterations in a multilevel algorithm applied to inverse problems in piezoelectricity JF - Journal of Inverse and Ill-posed Problems N2 - Modified Landweber iterations in a multilevel algorithm applied to inverse problems in piezoelectricity KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2009 SP - 585 EP - 593 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung A1 - Bordas, Stéphane Pierre Alain T1 - An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes JF - Journal of Computational and Applied Mathematics N2 - An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2009 SP - 2112 EP - 2135 ER - TY - JOUR A1 - Luther, Torsten A1 - Könke, Carsten T1 - Polycrystal models for the analysis of intergranular crack growth in metallic materials JF - Engineering Fracture Mechanics N2 - Polycrystal models for the analysis of intergranular crack growth in metallic materials KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2009 SP - 2332 EP - 2343 ER - TY - CHAP A1 - Szolomicki, Jerzy Pawel ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - STRUCTURAL BEHAVIOUR OF MASONRY VAULTS N2 - This paper deals with the modelling and the analysis of masonry vaults. Numerical FEM analyses are performed using LUSAS code. Two vault typologies are analysed (barrel and cross-ribbed vaults) parametrically varying geometrical proportions and constraints. The proposed model and the developed numerical procedure are implemented in a computer analysis. Numerical applications are developed to assess the model effectiveness and the efficiency of the numerical procedure. The main object of the present paper is the development of a computational procedure which allows to define 3D structural behaviour of masonry vaults. For each investigated example, the homogenized limit analysis approach has been employed to predict ultimate load and failure mechanisms. Finally, both a mesh dependence study and a sensitivity analysis are reported. Sensitivity analysis is conducted varying in a wide range mortar tensile strength and mortar friction angle with the aim of investigating the influence of the mechanical properties of joints on collapse load and failure mechanisms. The proposed computer model is validated by a comparison with experimental results available in the literature. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28966 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Gutierrez S, Andrei A1 - Ramirez, Marco P. A1 - Rodriguez, Octavio A1 - Sanchez N., V.D. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ON THE SOLUTIONS OF ELECTRICAL IMPEDANCE EQUATION: A PSEUDOANALYTIC APPROACH FOR SEPARABLE-VARIABLES CONDUCTIVITY FUNCTION N2 - Using a quaternionic reformulation of the electrical impedance equation, we consider a two-dimensional separable-variables conductivity function and, posing two different techniques, we obtain a special class of Vekua equation, whose general solution can be approach by virtue of Taylor series in formal powers, for which is possible to introduce an explicit Bers generating sequence. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28478 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Lavicka, Roman A1 - Delanghe, Richard A1 - Soucek, Vladimir ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - THE HOWE DUALITY FOR HODGE SYSTEMS N2 - In this note, we describe quite explicitly the Howe duality for Hodge systems and connect it with the well-known facts of harmonic analysis and Clifford analysis. In Section 2, we recall briefly the Fisher decomposition and the Howe duality for harmonic analysis. In Section 3, the well-known fact that Clifford analysis is a real refinement of harmonic analysis is illustrated by the Fisher decomposition and the Howe duality for the space of spinor-valued polynomials in the Euclidean space under the so-called L-action. On the other hand, for Clifford algebra valued polynomials, we can consider another action, called in Clifford analysis the H-action. In the last section, we recall the Fisher decomposition for the H-action obtained recently. As in Clifford analysis the prominent role plays the Dirac equation in this case the basic set of equations is formed by the Hodge system. Moreover, analysis of Hodge systems can be viewed even as a refinement of Clifford analysis. In this note, we describe the Howe duality for the H-action. In particular, in Proposition 1, we recognize the Howe dual partner of the orthogonal group O(m) in this case as the Lie superalgebra sl(2 1). Furthermore, Theorem 2 gives the corresponding multiplicity free decomposition with an explicit description of irreducible pieces. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28669 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Le, Hanh Quang A1 - Rüppel, Uwe ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MULTI-SITE CONSTRUCTION PROJECT SCHEDULING CONSIDERING RESOURCE MOVING TIME IN DEVELOPING COUNTRIES N2 - Under the booming construction demands in developing countries, particularly in Vietnam situation, construction contractors often perform multiple concurrent projects in different places. In construction project scheduling processes, the existing scheduling methods often assume the resource moving time between activities/projects to be negligible. When multiple projects are deployed in different places and far from each other, this assumption has many shortcomings for properly modelling the real-world constraints. Especially, with respect to developing countries such as the Vietnam which contains transportation systems that are still in backward and low technical standards. This paper proposes a new algorithm named Multi-Site Construction Project Scheduling - MCOPS. The objective of this algorithm is to solve the problem of minimising multi-site construction project duration under limited available conditions of renewable resources (labour, machines and equipment) combining with the moving time of required resource among activities/projects. Additionally, in order to mitigate the impact of resource moving time into the multi-site project duration, this paper proposed a new priority rule: Minimum Resource Moving Time (MinRMT). The MinRMT is applied to rank the finished activities according to a priority order, to support the released resources to the scheduling activities. In order to investigate the impact of the resource moving time among activities during the scheduling process, computational experimentation was implemented. The results of the MCOPS-based computational experiments showed that, the resource moving time among projects has significantly impacted the multi-site project durations and this amount of time can not be ignored in the multi-site project scheduling process. Besides, the efficient application of the MinRMT is also demonstrated through the achieved results of the computational experiment in this paper. Though the efforts in this paper are based on the Vietnamese construction conditions, the proposed method can be usefully applied in other developing countries which have similar construction conditions. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28671 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Ubysz, Andrzej A1 - Maj, Marek A1 - Stachon, T. A1 - Rogoza, Agnieszka ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NUMERICAL ANALYSIS OF STRESS DISTRIBUTION IN THE REINFORCED CONCRETE SUPPORT BEAM BRACKET EXPOSED TO DAMAGE N2 - The article presents analysis of stress distribution in the reinforced concrete support beam bracket which is a component of prefabricated reinforced concrete building. The building structure is spatial frame where dilatations were applied. The proper stiffness of its structure is provided by frames with stiff joints, monolithic lift shifts and staircases. The prefabricated slab floors are supported by beam shelves which are shaped as inverted letter ‘T’. Beams are supported by the column brackets. In order to lower the storey height and fulfill the architectural demands at the same time, the designer lowered the height of beam at the support zone. The analyzed case refers to the bracket zone where the slant crack. on the support beam bracket was observed. It could appear as a result of overcrossing of allowable tension stresses in reinforced concrete, in the bracket zone. It should be noted that the construction solution applied, i.e. concurrent support of the “undercut” beam on the column bracket causes local concentration of stresses in the undercut zone where the strongest transverse forces and tangent stresses occur concurrently. Some additional rectangular stresses being a result of placing the slab floors on the lower part of beam shelves sum up with those described above. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28693 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Brackx, Fred A1 - De Schepper, Hennie A1 - Luna-Elizararras, Maria Elena A1 - Shapiro, Michael ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTEGRAL REPRESENTATIONS IN HERMITEAN CLIFFORD ANALYSIS N2 - Euclidean Clifford analysis is a higher dimensional function theory offering a refinement of classical harmonic analysis. The theory is centered around the concept of monogenic functions, i.e. null solutions of a first order vector valued rotation invariant differential operator called the Dirac operator, which factorizes the Laplacian. More recently, Hermitean Clifford analysis has emerged as a new and successful branch of Clifford analysis, offering yet a refinement of the Euclidean case; it focusses on the simultaneous null solutions, called Hermitean (or h-) monogenic functions, of two Hermitean Dirac operators which are invariant under the action of the unitary group. In Euclidean Clifford analysis, the Clifford-Cauchy integral formula has proven to be a corner stone of the function theory, as is the case for the traditional Cauchy formula for holomorphic functions in the complex plane. Previously, a Hermitean Clifford-Cauchy integral formula has been established by means of a matrix approach. This formula reduces to the traditional Martinelli-Bochner formula for holomorphic functions of several complex variables when taking functions with values in an appropriate part of complex spinor space. This means that the theory of Hermitean monogenic functions should encompass also other results of several variable complex analysis as special cases. At present we will elaborate further on the obtained results and refine them, considering fundamental solutions, Borel-Pompeiu representations and the Teoderescu inversion, each of them being developed at different levels, including the global level, handling vector variables, vector differential operators and the Clifford geometric product as well as the blade level were variables and differential operators act by means of the dot and wedge products. A rich world of results reveals itself, indeed including well-known formulae from the theory of several complex variables. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28326 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Richter, Matthias A1 - Ilzig, Katrin A1 - Rudnicki, Andrzej ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MODELS FOR THE BUS HEADWAY DISTRIBUTION IN THE FLOW BEHIND A TRAFFIC SIGNAL N2 - Several results concerning the distribution of the headway of busses in the flow behind a traffic signal are presented. In the main focus of interest is the description of analytical models, which are verified by the results of Monte-Carlo-Methods. The advantage of analytical models (verified, but not derived by simulation methods) is their flexibility with respect to possible generalizations. For instance, several random distributions of the flow incoming to the traffic signal can be compared. The attention will be directed at the question, how the primary headway H (analyzed in front of the traffic signal) is mapped to the headway H’ analyzed behind of the traffic signal and how the random distribution of H is mapped to that of H’. For the traffic flow in front of the traffic signal several models will be discussed. The first case considers the situation, that busses operate on a common lane with the individual motor car traffic and the traffic flow is saturated. In the second situation, busses operate on a separated bus lane. Moreover, a mixed situation is discussed to model as close to reality as possible. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28521 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Wudtke, Idna A1 - Werner, Frank ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MODELLING OF MATERIAL PHENOMENA OF STEEL IN CONSTITUTIVE RELATIONS IN CONTEXT OF WELDING N2 - The application of partly decoupled approach by means of continuum mechanics facilitates the calculation of structural responses due to welding. The numerical results demonstrate the ability of a qualitative prediction of welded connections. As it is intended to integrate the local effects of a joint in structural analysis of steel constructions, it is necessary to meet higher approaches towards quality. The wide array of material parameters are presented, which are affecting the thermal, metallurgical and mechanical behavior, and which have to be identified. For that purpose further investigations are necessary to analyze the sensitivity of the models towards different material properties. The experimental determination of every material parameter is not possible due to the extraordinary laborious efforts needed. Besides that, experimentally identified parameters can be applied only for the tested steel quality for measured temperature-time regimes. For that reason alternative approaches for identification of material parameters, such as optimization strategies, have to be applied. After a definition of material parameters a quantitative prediction of welded connections will also be possible. Numerical results show the effect of phase transformation, activated by welding process, on residual stress state. As these phenomena occur in local areas in the range of crystal and grain sizes, the description of microscopic phenomena and their propagation on a macroscopic level due to approaches of homogenization might be expedient. Nevertheless, one should bear in mind, the increasing number of material parameters as well as the complexity of their experimental determination. Thus the microscopic approach should always be investigated under the scope of ability and efficiency of a required prediction. Under certain circumstances a step backwards, adopting a phenomenological approach, also can be beneficial. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-29032 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Vu, Anh Tuan A1 - Werner, Frank ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - OPTIMIZATION OF STEEL STRUCTURES BASED ON DIFFERENTIAL EVOLUTION ALGORITHM N2 - Steel structural design is an integral part of the building construction process. So far, various methods of design have been applied in practice to satisfy the design requirements. This paper attempts to acquire the Differential Evolution Algorithms in automatization of specific synthesis and rationalization of design process. The capacity of the Differential Evolution Algorithms to deal with continuous and/or discrete optimization of steel structures is also demonstrated. The goal of this study is to propose an optimal design of steel frame structures using built-up I-sections and/or a combination of standard hot-rolled profiles. All optimized steel frame structures in this paper generated optimization solutions better than the original solution designed by the manufacturer. Taking the criteria regarding the quality and efficiency of the practical design into consideration, the produced optimal design with the Differential Evolution Algorithms can completely replace conventional design because of its excellent performance. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-29007 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER -