TY - JOUR A1 - Wiegand, Torben A1 - Osburg, Andrea T1 - Synthesis, Curing and Thermal Behavior of Amine Hardeners from Potentially Renewable Sources JF - Polymers N2 - Research into bio-based epoxy resins has intensified in recent decades. Here, it is of great importance to use raw materials whose use does not compete with food production. In addition, the performance of the newly developed materials should be comparable to that of conventional products. Possible starting materials are lignin degradation products, such as vanillin and syringaldehyde, for which new synthesis routes to the desired products must be found and their properties determined. In this article, the first synthesis of two amine hardeners, starting with vanillin and syringaldehyde, using the Smiles rearrangement reaction is reported. The amine hardeners were mixed with bisphenol A diglycidyl ether, and the curing was compared to isophorone diamine, 4-4′-diaminodiphenyl sulfone, and 4-Aminonbenzylamine by means of differential scanning calorimetry. It was found that the two amines prepared are cold-curing. As TG-MS studies showed, the thermal stability of at least one of the polymers prepared with the potentially bio-based amines is comparable to that of the polymer prepared with isophorone diamine, and similar degradation products are formed during pyrolysis. KW - Epoxide KW - Epoxidharz KW - Polymere KW - epoxy KW - amine hardener KW - curing agent KW - bio-based KW - vanillin KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63745 UR - https://www.mdpi.com/2073-4360/15/4/990 VL - 2023 IS - volume 15, issue 4, article 990 SP - 1 EP - 12 PB - MDPI CY - Basel ER - TY - JOUR A1 - Alemu, Yohannes L. A1 - Habte, Bedilu A1 - Lahmer, Tom A1 - Urgessa, Girum T1 - Topologically preoptimized ground structure (TPOGS) for the optimization of 3D RC buildings JF - Asian Journal of Civil Engineering N2 - As an optimization that starts from a randomly selected structure generally does not guarantee reasonable optimality, the use of a systemic approach, named the ground structure, is widely accepted in steel-made truss and frame structural design. However, in the case of reinforced concrete (RC) structural optimization, because of the orthogonal orientation of structural members, randomly chosen or architect-sketched framing is used. Such a one-time fixed layout trend, in addition to its lack of a systemic approach, does not necessarily guarantee optimality. In this study, an approach for generating a candidate ground structure to be used for cost or weight minimization of 3D RC building structures with included slabs is developed. A multiobjective function at the floor optimization stage and a single objective function at the frame optimization stage are considered. A particle swarm optimization (PSO) method is employed for selecting the optimal ground structure. This method enables generating a simple, yet potential, real-world representation of topologically preoptimized ground structure while both structural and main architectural requirements are considered. This is supported by a case study for different floor domain sizes. KW - Bodenmechanik KW - Strukturanalyse KW - Optimierung KW - Stahlbetonkonstruktion KW - Dreidimensionales Modell KW - ground structure KW - TPOGS KW - topology optimization KW - 3D reinforced concrete buildings Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63677 UR - https://link.springer.com/article/10.1007/s42107-023-00640-2 VL - 2023 SP - 1 EP - 11 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Guo, Hongwei A1 - Alajlan, Naif A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Physics-informed deep learning for three-dimensional transient heat transfer analysis of functionally graded materials JF - Computational Mechanics N2 - We present a physics-informed deep learning model for the transient heat transfer analysis of three-dimensional functionally graded materials (FGMs) employing a Runge–Kutta discrete time scheme. Firstly, the governing equation, associated boundary conditions and the initial condition for transient heat transfer analysis of FGMs with exponential material variations are presented. Then, the deep collocation method with the Runge–Kutta integration scheme for transient analysis is introduced. The prior physics that helps to generalize the physics-informed deep learning model is introduced by constraining the temperature variable with discrete time schemes and initial/boundary conditions. Further the fitted activation functions suitable for dynamic analysis are presented. Finally, we validate our approach through several numerical examples on FGMs with irregular shapes and a variety of boundary conditions. From numerical experiments, the predicted results with PIDL demonstrate well agreement with analytical solutions and other numerical methods in predicting of both temperature and flux distributions and can be adaptive to transient analysis of FGMs with different shapes, which can be the promising surrogate model in transient dynamic analysis. KW - Wärmeübergang KW - Deep Learning KW - Modellierung KW - physics-informed activation function KW - heat transfer KW - functionally graded materials Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63666 UR - https://link.springer.com/article/10.1007/s00466-023-02287-x VL - 2023 SP - 1 EP - 12 PB - Springer CY - Berlin ER - TY - JOUR A1 - Rabczuk, Timon A1 - Zhuang, Xiaoying A1 - Oterkus, Erkan T1 - Editorial: Computational modeling based on nonlocal theory JF - Engineering with Computers N2 - Nonlocal theories concern the interaction of objects, which are separated in space. Classical examples are Coulomb’s law or Newton’s law of universal gravitation. They had signficiant impact in physics and engineering. One classical application in mechanics is the failure of quasi-brittle materials. While local models lead to an ill-posed boundary value problem and associated mesh dependent results, nonlocal models guarantee the well-posedness and are furthermore relatively easy to implement into commercial computational software. KW - Computersimulation KW - Mathematische Modellierung KW - computational modeling KW - nonlocal theory Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63658 UR - https://link.springer.com/article/10.1007/s00366-022-01775-7 VL - 2023 IS - Volume 39, issue 3 PB - Springer CY - London ER - TY - CHAP A1 - Baron, Nicole A1 - Mandavere, Melody A1 - Cheruiyot, Roselyne T1 - SE/ NPO Ecosystems and urban Governance in Johannesburg T2 - ISTR, Fifteenth International Conference, Montreal, Canada N2 - This paper presents initial findings from the empirical analysis of community based social enterprise (SE) and non-profit organisation (NPO) ecosystems in Johannesburg. SEs and NPOs are widely recognised as contributors to the resilience of marginalised urban communities. However, the connection between these organisations , urban governance, and community resilience has not yet been sufficiently understood , particularly in African urban contexts. The 'Resilient Urban Communities' project focuses on Johannesburg as a case study to shed light on this under-researched topic. The key to exploring it is understanding SEs and NPOs as providers of public services, job creators, and promoters of good governance, all of which contribute to community resilience. Using this premise as a starting point, this paper investigates ecosystem conditions with a particular focus on state-civil society partnerships. Empirical data was generated through semi-struc-tured interviews and analysed with a grounded theory approach. Preliminary results of this ongoing research reveal that urban geography is a relevant ecosystem factor for SEs and NPOs from marginalised communities. We also suggest that co-production could be an opportunity for growth within the investigated state-civil society partnership. KW - Südafrika KW - Johannesburg KW - Nonprofit-Organisation KW - Regionalentwicklung KW - Governance KW - Unterstützungsökosystem KW - Sozialunternehmen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63643 ER - TY - JOUR A1 - Kraaz, Luise A1 - Koop, Maria A1 - Wunsch, Maximilian A1 - Plank-Wiedenbeck, Uwe T1 - The Scaling Potential of Experimental Knowledge in the Case of the Bauhaus.MobilityLab, Erfurt (Germany) JF - Urban Planning N2 - Real-world labs hold the potential to catalyse rapid urban transformations through real-world experimentation. Characterised by a rather radical, responsive, and location-specific nature, real-world labs face constraints in the scaling of experimental knowledge. To make a significant contribution to urban transformation, the produced knowledge must go beyond the level of a building, street, or small district where real-world experiments are conducted. Thus, a conflict arises between experimental boundaries and the stimulation of broader implications. The challenges of scaling experimental knowledge have been recognised as a problem, but remain largely unexplained. Based on this, the article will discuss the applicability of the “typology of amplification processes” by Lam et al. (2020) to explore and evaluate the potential of scaling experimental knowledge from real-world labs. The application of the typology is exemplified in the case of the Bauhaus.MobilityLab. The Bauhaus.MobilityLab takes a unique approach by testing and developing cross-sectoral mobility, energy, and logistics solutions with a distinct focus on scaling knowledge and innovation. For this case study, different qualitative research techniques are combined according to “within-method triangulation” and synthesised in a strengths, weaknesses, opportunities, and threats (SWOT) analysis. The analysis of the Bauhaus.MobilityLab proves that the “typology of amplification processes” is useful as a systematic approach to identifying and evaluating the potential of scaling experimental knowledge. KW - Stadtplanung KW - Infrastrukturplanung KW - Transformation KW - Reallabor KW - Amplifikationsprozesse KW - Bauhaus.MobilityLab KW - experimentelles Wissen KW - Realexperimente KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230509-63633 UR - https://www.cogitatiopress.com/urbanplanning/article/view/5329 VL - 2022 IS - Volume 7, Issue 3 SP - 274 EP - 284 ER - TY - CHAP A1 - Schwendner, Sascha A1 - Völlmecke, Lars A1 - Ho, Ai Phien A1 - Fischer, Jens A1 - Seim, Werner T1 - TESTING OF CONNECTIONS TAKEN FROM OLD NAILED ROOF TRUSSES N2 - Experimental testing of nailed connections taken from old roof trusses is presented in this paper. To enable the further use and preservation of nailed roof trusses, it is important to understand how the nail corrosion and aging processes of steel and wood affect the load-bearing capacity and deformation behaviour of such structures. The hypothesis was investigated whether corroded nails allow an increase in load-bearing capacity. Several old and new joints were tested in a first test series, and the results were very promising regarding the initial assumption. However, more tests must be carried out to verify the results. KW - Holzbau KW - nailed trusses KW - nailed constructions KW - Corrosion KW - Preservation KW - Withdreawal Y1 - 2023 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.6362 ER - TY - CHAP A1 - Völlmecke, Lars A1 - Schwendner, Sascha A1 - Ho, Ai Phien A1 - Fischer, Jens A1 - Seim, Werner T1 - Assessment of nailed connections in existing structures N2 - This paper presents the development of an assessment scheme for a visual qualitative evaluation of nailed connections in existing structures, such as board trusses. In terms of further use and preservation, a quick visual inspection will help to evaluate the quality of a structure regarding its load-bearing capacity and deformation behaviour. Tests of old and new nailed joints in combination with a rating scheme point out the correlation between the load-bearing capacity and condition of a joint. Old joints of comparatively good condition tend to exhibit better results than those of poor condition. Moreover, aged joints are generally more load-bearing than newly assembled ones. KW - Holzbau KW - Träger KW - nailed trusses KW - nailed constructions KW - Corrosion KW - Preservation KW - Re-use Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230609-63615 ER - TY - GEN A1 - Vollmer, Lisa A1 - Calbet i Elias, Laura A1 - Raab, Susanna A1 - Zanders, Theresa A1 - Kleine, Aya T1 - Ko-Produktion. Ein Handlungsleitfaden für die Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren und öffentlichen Verwaltungen N2 - Dieser Handlungsleitfaden möchte die Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren und öffentlichen Verwaltungen erleichtern. Er enthält allerdings kein Patentrezept, mit dem eine solche Zusammenarbeit gebacken werden kann, sondern vor allem Anstöße, was es dabei alles zu bedenken gilt. Denn Ko-Produktionsprozesse, bei denen zivilgesellschaftliche Gruppen und Verwaltungen gemeinsam an der Umsetzung von Dienstleistungen und Infrastrukturen der Daseinsvorsorge arbeiten, sind komplexe und noch recht unerprobte Prozesse. T3 - KoopWohl - Working Paper - 6 KW - Koproduktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230413-49549 ET - Erste Auflage ER - TY - THES A1 - Cicek, Burhan A1 - Cancino, Pamela T1 - Küreken 2013. Entwerfen eines Dorfes aus Lehm N2 - Die Diskussionen in der Politik und in der Gesellschaft über Klimawandel, globale Erwärmung oder Nachhaltigkeit, die schon noch länger anhält, werden nie ein Ende finden, solange die Probleme, auf denen sie basiert, unlösbar bleiben. Vorgeschlagene Lösungen werden meist nicht richtig umgesetzt. Im Zusammenhang mit dieser Problematik steigt aber das Verantwortungsgefühl für bessere Zukunftsstrategien immer mehr. Die in den letzten Jahren vorgekommenen Umweltkatastrophen, wie im Golf von Mexiko (April 2010) oder im Fukushima (März 2011) die noch aktuell sind, zeigen, dass der Primärenergieeinsatz oder die Transportproblematik nicht mehr nur die Sorge der Entwicklungsländer, sondern auch der Industrieländer ist. Die Bauwelt mit ihrem erheblichen Energiebedarf spielt bei der Festlegung der Zukunftsstrategien eine große Rolle. Vor allem sind die Forschungen nach umweltfreundlichen Materialien, der Recyclebarkeit der eingesetzten Baumaterialien oder dem vernünftigen Nutzen der Naturressourcen die wichtigsten Schwerpunkte. In dieser Hinsicht bringt Lehm als Baumaterial viele Vorteile mit sich. Bei einem Artikel sagt der Lehmbauexperte Martin Rauch: “In heutiger Zeit und einem Kulturkreis, in dem Baugrund und Arbeitszeit unsere großen Kosten verursachen, findet der tradierte Lehmbau mit dem verbundenen großen Aufwand an menschlicher Arbeitszeit nur schwer seinen Platz. Über die Art der Bauweise wird auch die Entscheidung gefällt, wie und wo die Wertschöpfung erfolgt und ob der Einsatz des Budgets einen gesellschaftlichen Nutzen mit sich bringt. Im Vergleich zu einem Sichtbetonhaus können bei einem Stampflehmhaus 40% der Primärenergie ein gespart und dafür mehr lokale Arbeitsressourcen gebunden werden. Davon profitieren vor allem die lokalen Handwerker und mittelständischen Betriebe” Anatolien ist der Ort, wo man immer noch die tiefsten Wurzeln der Baukultur menschlicher Geschichte findet. Diese Baukultur, die in den vergangenen Jahrzehnten fast verlorengegangen ist, ist die Lehmbaukultur. In dieser Hinsicht beabsichtigt dieser Entwurf die Würde des Lehms in Anatolien wieder herzustellen und dadurch dessen Glaubwürdigkeit zurückzubringen. KW - Lehm KW - Lehmbau KW - stabilisierter Lehm KW - Stampflehm KW - Alker Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-63568 ER - TY - THES A1 - Dokhanchi, Najmeh Sadat T1 - Measurement of the Indoor Air Temperature Distribution using Acoustic Travel-Time Tomography N2 - One of the main criteria determining the thermal comfort of occupants is the air temperature. To monitor this parameter, a thermostat is traditionally mounted in the indoor environment for instance in office rooms in the workplaces, or directly on the radiator or in another location in a room. One of the drawbacks of this conventional method is the measurement at a certain location instead of the temperature distribution in the entire room including the occupant zone. As a result, the climatic conditions measured at the thermostat point may differ from those at the user's location. This not only negatively impacts the thermal comfort assessment but also leads to a waste of energy due to unnecessary heating and cooling. Moreover, for measuring the distribution of the air temperature under laboratory conditions, multiple thermal sensors should be installed in the area under investigation. This requires high effort in both installation and expense. To overcome the shortcomings of traditional sensors, Acoustic travel-time TOMography (ATOM) offers an alternative based on measuring the transmission sound velocity signals. The basis of the ATOM technique is the first-order dependency of the sound velocity on the medium's temperature. The average sound velocity, along the propagation paths, can be determined by travel-times estimation of a defined acoustic signal between transducers. After the travel-times collection, the room is divided into several volumetric grid cells, i.e. voxels, whose sizes are defined depending on the dimension of the room and the number of sound paths. Accordingly, the spatial air temperature in each voxel can be determined using a suitable tomographic algorithm. Recent studies indicate that despite the great potential of this technique to detect room climate, few experiments have been conducted. This thesis aims to develop the ATOM technique for indoor climatic applications while coupling the analysis methods of tomography and room acoustics. The method developed in this thesis uses high-energy early reflections in addition to the direct paths between transducers for travel time estimation. In this way, reflections can provide multiple sound paths that allow the room coverage to be maintained even when a few or even only one transmitter and receiver are used. In the development of the ATOM measurement system, several approaches have been employed, including the development of numerical methods and simulations and conducting experimental measurements, each of which has contributed to the improvement of the system's accuracy. In order to effectively separate the early reflections and ensure adequate coverage of the room with sound paths, a numerical method was developed based on the optimization of the coordinates of the sound transducers in the test room. The validation of the optimal positioning method shows that the reconstructed temperatures were significantly improved by placing the transducers at the optimal coordinates derived from the developed numerical method. The other numerical method developed is related to the selection of the travel times of the early reflections. Accordingly, the detection of the travel times has been improved by adjusting the lengths of the multiple analysis time-windows according to the individual travel times in the reflectogram of the room impulse response. This can reduce the probability of trapping faulty travel times in the analysis time-windows. The simulation model used in this thesis is based on the image source model (ISM) method for simulating the theoretical travel times of early reflection sound paths. The simulation model was developed to simulate the theoretical travel times up to third-order reflections. The empirical measurements were carried out in the climate lab of the Chair of Building Physics under different boundary conditions, i.e., combinations of different room air temperatures under both steady-state and transient conditions, and different measurement setups. With the measurements under controllable conditions in the climate lab, the validity of the developed numerical methods was confirmed. In this thesis, the performance of the ATOM measurement system was evaluated using two measurement setups. The setup for the initial investigations consists of an omnidirectional receiver and a near omnidirectional sound source, keeping the number of transducers as few as possible. This has led to accurately identify the sources of error that could occur in each part of the measuring system. The second measurement setup consists of two directional sound sources and one omnidirectional receiver. This arrangement of transducers allowed a higher number of well-detected travel times for tomography reconstruction, a better travel time estimation due to the directivity of the sound source, and better space utilization. Furthermore, this new measurement setup was tested to determine an optimal selection of the excitation signal. The results showed that for the utilized setup, a linear chirp signal with a frequency range of 200 - 4000 Hz and a signal duration of t = 1 s represents an optimal selection with respect to the reliability of the measured travel times and higher signal-to-noise ratio (SNR). To evaluate the performance of the measuring setups, the ATOM temperatures were always compared with the temperatures of high-resolution NTC thermistors with an accuracy of ±0.2 K. The entire measurement program, including acoustic measurements, simulation, signal processing, and visualization of measurement results are performed in MATLAB software. In addition, to reduce the uncertainty of the positioning of the transducers, the acoustic centre of the loudspeaker was determined experimentally for three types of excitation signals, namely MLS (maximum length sequence) signals with different lengths and duration, linear and logarithmic chirp signals with different defined frequency ranges. For this purpose, the climate lab was converted into a fully anechoic chamber by attaching absorption panels to the entire surfaces of the room. The measurement results indicated that the measurement of the acoustic centre of the sound source significantly reduces the displacement error of the transducer position. Moreover, to measure the air temperature in an occupied room, an algorithm was developed that can convert distorted signals into pure reference signals using an adaptive filter. The measurement results confirm the validity of the approach for a temperature interval of 4 K inside the climate lab. Accordingly, the accuracy of the reconstructed temperatures indicated that ATOM is very suitable for measuring the air temperature distribution in rooms. T3 - Schriftenreihe der Professur Bauphysik - 8 KW - Bauphysik KW - Acoustic Travel-Time Tomography KW - Bauklimatik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230414-49567 SN - 978-3-00-075344-2 (print) ER - TY - JOUR A1 - Simon-Ritz, Frank T1 - "Kultur ist Reichtum an Problemen": Wie sich der Kultur-Begriff der UNESCO an Egon Friedell annäherte JF - Palmbaum: Literarisches Journal aus Thüringen N2 - Der in H. 1/2023 erschienene Essay führt Gedanken einer in H. 1/2022 des "Palmbaum" erschienene Betrachtung (https://doi.org/10.25643/bauhaus-universitaet.4628) weiter. Im Zentrum stehen dabei die Bemühungen der UNESCO um das immaterielle Kulturerbe. KW - UNESCO KW - Kulturerbe Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230411-49524 VL - 2023 IS - Heft 1 PB - Quartus Verlag CY - Bucha bei Jena ER - TY - JOUR A1 - Londong, Jörg A1 - Barth, Marcus A1 - Söbke, Heinrich T1 - Reducing antimicrobial resistances by source separation of domestic wastewater JF - Frontiers in Environmental Health N2 - Antimicrobial resistances (AMR) are ranked among the top ten threats to public health and societal development worldwide. Toilet wastewater contained in domestic wastewater is a significant source of AMR entering the aquatic environment. The current commonly implemented combined sewer systems at times cause overflows during rain events, resulting in the discharge of untreated wastewater into the aquatic environment, thus promoting AMR. In this short research article, we describe an approach to transform combined sewer systems into source separation-modified combined sewer systems that separately treat toilet wastewater. We employ simulations for demonstrating that source separation-modified combined sewer systems reduce the emission of AMR- causing substances by up to 11.5 logarithm levels. Thus, source separation- modified combined sewer systems are amongst the most effective means of combating AMR. KEYWORDS KW - Allgemeinheit KW - Öffentlichkeit KW - Gesundheit KW - Kanal KW - Abwasser KW - Antibiotikum KW - Resistenz KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230403-49483 UR - https://www.frontiersin.org/articles/10.3389/fenvh.2023.1151898/full VL - 2023 IS - Volume 2, article 1151898 SP - 1 EP - 5 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Wellbrock, Christian-Mathias A1 - Lobigs, Frank A1 - Erbrich, Lukas A1 - Buschow, Christopher T1 - Coopetition is King. Ökonomische Potentiale und medienpolitische Implikationen kooperativer Journalismusplattformen N2 - Die vorliegende Studie geht der Fragestellung nach, wie sich eine anbieterübergreifende, abonnementbasierte Plattform für den digitalen Journalismus, also eine Art Spotify im Journalismus, auf die Umsätze der Anbieter journalistischer Inhalte und die Abonnements im Digitaljournalismus in Deutschland auswirken würde. Auf Basis drei sich ergänzender Schätzmethoden für Zahlungsbereitschaft, die in zwei Repräsentativbefragungen der deutschen Online-Bevölkerung mit insgesamt 8.000 Teilnehmenden angewandt wurden, gelangt das Whitepaper zu den folgenden Schlüsselbefunden. KW - Journalistik KW - Nachrichtensendung KW - Online-Medien KW - Geschäftsmodell KW - Journalismusplattform KW - Journalismusförderung KW - Digitaljournalismus KW - Abonnement KW - Studie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230320-49473 VL - 2023 SP - 1 EP - 48 PB - Landesanstalt für Medien NRW CY - Düsseldorf ER - TY - JOUR A1 - Ansari, Meisam A1 - Zacharias, Christin A1 - Könke, Carsten T1 - Metaconcrete: An Experimental Study on the Impact of the Core-Coating Inclusions on Mechanical Vibration JF - materials N2 - Resonance vibration of structures is an unpleasant incident that can be conventionally avoided by using a Tuned Mass Damper (TMD). The scope of this paper contains the utilization of engineered inclusions in concrete as damping aggregates to suppress resonance vibration similar to a TMD. The inclusions are composed of a stainless-steel core with a spherical shape coated with silicone. This configuration has been the subject of several studies and it is best known as Metaconcrete. This paper presents the procedure of a free vibration test conducted with two small-scaled concrete beams. The beams exhibited a higher damping ratio after the core-coating element was secured to them. Subsequently, two meso-models of small-scaled beams were created: one representing conventional concrete and the other representing concrete with the core-coating inclusions. The frequency response curves of the models were obtained. The change in the response peak verified the ability of the inclusions to suppress the resonance vibration. This study concludes that the core-coating inclusions can be utilized in concrete as damping aggregates. KW - Beton KW - Schwingungsdämpfung KW - metaconcrete KW - damping aggregate KW - vibration absorber Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230315-49370 UR - https://www.mdpi.com/1996-1944/16/5/1836 VL - 2023 IS - Volume 16, Issue 5, article 1836 SP - 1 EP - 18 PB - MDPI CY - Basel ER - TY - THES A1 - Drescher, Marcel T1 - Open Innovation in KMU - Eine empirische Analyse der offenen Innovationsaktivitäten im Kontext der Entrepreneurial Orientation N2 - Open Innovation in kleinen und mittleren Unternehmen (KMU) hat sich stark ausdifferenziert. Dabei zeigt die Empirie, dass KMU unterschiedliche Wege in der offenen Entwicklung von Innovationen begehen. Um die bestehende Literatur zu erweitern, wurden mit dieser Dissertation die Ziele verfolgt 1) offene Innovationsaktivitäten in KMU aus einer Prozessperspektive aufzudecken und genau zu beschreiben und 2) zu erklären, warum sich die Öffnung von Innovationsprozessen in KMU unterscheidet. Dafür wurde auf eine multiple Fallstudienanalyse zurückgegriffen. Untersuchungsobjekte waren kleine etablierte High-Tech Unternehmen aus den neuen Bundesländern. Die Ergebnisse zeigen sechs Prozessmodelle der offenen Innovationsentwicklung, beschrieben als Open Innovation Muster. Deskriptionen dieser Muster unter Berücksichtigung von formenden Innovationsaktivitäten, ausgetauschtem Wissen, beteiligten externen Akteuren und Gründen für und gegen Open Innovation vermitteln ein über den bisherigen Forschungsstand hinausgehendes Verständnis von Open Innovation in KMU. Zudem zeigen die Ergebnisse, dass die Entrepreneurial Orientation erklärt, warum KMU bei der Ausgestaltung von offenen Innovationsprozessen unterschiedlich vorgehen. In der Dissertation wird detailliert dargelegt, welche Open Innovation Muster sich anhand der Entrepreneurial Orientation von KMU (nicht-entrepreneurial bis entrepreneurial) zeigen. Die Ergebnisse liefern sowohl wissenschaftliche Implikationen, als auch Handlungsempfehlungen für die Unternehmenspraxis. KW - Open Innovation KW - Innovationsmanagement KW - Entrepreneurship KW - Klein- und Mittelbetrieb KW - KMU KW - Entrepreneurial Orientation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230314-49463 ER - TY - THES A1 - Gapševičius, Mindaugas T1 - Aesthetics of Maker Culture: the Active Role of the Audience N2 - In this work, practice-based research is conducted to rethink the understanding of aesthetics, especially in relation to current media art. Granted, we live in times when technologies merge with living organisms, but we also live in times that provide unlimited resources of knowledge and maker tools. I raise the question: In what way does the hybridization of living organisms and non-living technologies affect art audiences in the culture that may be defined as Maker culture? My hypothesis is that active participation of an audience in an artwork is inevitable for experiencing the artwork itself, while also suggesting that the impact of the umwelt changes the perception of an artwork. I emphasize artistic projects that unfold through mutual interaction among diverse peers, including humans, non-human organisms, and machines. In my thesis, I pursue collaborative scenarios that lead to the realization of artistic ideas: (1) the development of ideas by others influenced by me and (2) the materialization of my own ideas influenced by others. By developing the scenarios of collaborative work as an artistic experience, I conclude that the role of an artist in Maker culture is to mediate different types of knowledge and different positions, whereas the role of the audience is to actively engage in the artwork itself. At the same time, aesthetics as experience is triggered by the other, including living and non-living actors. It is intended that the developed methodologies could be further adapted in artistic practices, philosophy, anthropology, and environmental studies. KW - Medienkunst KW - BioArt KW - Media art KW - BioArt KW - Maker Culture Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230313-49396 ER - TY - THES A1 - Hunger, Francis T1 - Die Form der Datenbank N2 - Datenbanken sind heute die wichtigste Technik zur Organisation und Verarbeitung von Daten. Wie wurden sie zu einer der allgegenwärtigsten und gleichzeitig unsichtbarsten Praxis, die menschliche Zusammenarbeit ermöglicht? Diese Studie beginnt mit einer historiographischen Erkundung der zentralen medialen Konzepte von Datenbanken und mündet in das praxeologische Konzept der "Daten als Formation", kurz: In-Formation. Der erste Hauptteil befasst sich mit der Formatierung von Daten durch die Verarbeitung strukturierter Daten mittels relationaler Algebra. Es wird erarbeitet, auf welche Weise Struktur neues Wissen schafft. Im zweiten Teil wird erörtert, wie Datenbanken durch den diagrammatisch-epistemischen Raum der Tabelle operationalisiert werden. Drittens untersucht die Studie Transaktionen als Erklärungen dafür, wie Daten und reale Handlungen koordiniert und synchronisiert werden können. Im zweiten Hauptteil wird untersucht, wie relationale Datenbanken zunehmend zum Zentrum von Softwareanwendungen und Infrastrukturen wurden, wobei der Schwerpunkt auf wirtschaftlichen Praktiken liegt. In einem vergleichenden Ansatz wird anhand von Fallstudien in der DDR der 1970er bis 1990er Jahren die Frage gestellt, ob es eine „sozialistische“ Datenbankmanagement-Software gegeben hat. Dabei werden die „westlichen“ Produktionsdatenbanken BOMP, COPICS und MAPICS (IBM) sowie R2 (SAP) im Zusammenspiel mit den ostdeutschen Sachgebietsorientierten Programmiersystemen (SOPS) von Robotron diskutiert. Schließlich untersucht dieser Teil, wie die DDR ihr eigenes relationales Datenbankmanagementsystem, DABA 1600, entwickelte und dabei „westliche“ Technologie neu interpretierte. Das abschließende Kapitel fasst die Konzepte der relationalen Datenbanken als heute wichtigsten Datenorganisationstechnik zusammen. Es erörtert, inwiefern es möglich ist, die historiographische Erzählung über die Entstehung von Datenbankmanagementsystemen und ihre Folgen für die Geschichte der Informatik zu dezentrieren. Es schließt mit der Erkenntnis, dass östliche und westliche Medien der Kooperation sich in Form und Funktion erstaunlich ähnlich sind, beide wurzeln in den tiefen Genealogien von organisatorischen und wissensbildenden Datenpraktiken. Neben dieser medienwissenschaftlichen Arbeit besteht die Dissertation aus einem künstlerischen Teil, der dokumentiert wird: Anhand einer Reihe von Vlogs erkundet die fiktionale Figur „Data Proxy“ aktuelle Datenökologien. KW - Medientheorie KW - Datenbank KW - Medienkunst KW - Software KW - Datenbanken KW - Software-Studies KW - Geschichte des Computing KW - Medientheorie KW - Daten Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230306-49362 ER - TY - THES A1 - Jaouadi, Zouhour T1 - Pareto and Reliability-Oriented Aeroelastic Shape Optimization of Bridge Decks N2 - Due to the development of new technologies and materials, optimized bridge design has recently gained more attention. The aim is to reduce the bridge components materials and the CO2 emission from the cement manufacturing process. Thus, most long-span bridges are designed to be with high flexibility, low structural damping, and longer and slender spans. Such designs lead, however, to aeroelastic challenges. Moreover, the consideration of both the structural and aeroelastic behavior in bridges leads to contradictory solutions as the structural constraints lead to deck prototypes with high depth which provide high inertia to material volume ratios. On the other hand, considering solely the aerodynamic requirements, slender airfoil-shaped bridge box girders are recommended since they prevent vortex shedding and exhibit minimum drag. Within this framework comes this study which provides approaches to find optimal bridge deck cross-sections while considering the aerodynamic effects. Shape optimization of deck cross-section is usually formulated to minimize the amount of material by finding adequate parameters such as the depth, the height, and the thickness and while ensuring the overall stability of the structure by the application of some constraints. Codes and studies have been implemented to analyze the wind phenomena and the structural responses towards bridge deck cross-sections where simplifications have been adopted due to the complexity and the uniqueness of such components besides the difficulty of obtaining a final model of the aerodynamic behavior. In this thesis, two main perspectives have been studied; the first is fully deterministic and presents a novel framework on generating optimal aerodynamic shapes for streamlined and trapezoidal cross-sections based on the meta-modeling approach. Single and multi-objective optimizations were both carried out and a Pareto Front is generated. The performance of the optimal designs is checked afterwards. In the second part, a new strategy based on Reliability-Based Design Optimization (RBDO) to mitigate the vortex-induced vibration (VIV) on the Trans-Tokyo Bay bridge is proposed. Small changes in the leading and trailing edges are presented and uncertainties are considered in the structural system. Probabilistic constraints based on polynomial regression are evaluated and the problem is solved while applying the Reliability Index Approach (RIA) and the Performance Measure Approach (PMA). The results obtained in the first part showed that the aspect ratio has a significant effect on the aerodynamic behavior where deeper cross-sections have lower resistance against flutter and should be avoided. In the second part, the adopted RBDO approach succeeded to mitigate the VIV, and it is proven that designs with narrow or prolonged bottom-base length and featuring an abrupt surface change in the leading and trailing edges can lead to high vertical vibration amplitude. It is expected that this research will help engineers with the selections of the adequate deck cross-section layout, and encourage researchers to apply concepts of optimization regarding this field and develop the presented approaches for further studies. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,10 KW - Gestaltoptimierung KW - Vibration KW - Deck cross-sections KW - Reliability-based design optimization KW - Shape optimization KW - Pareto Front KW - Vortex-induced vibration Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230303-49352 ER - TY - THES A1 - Weise, Franziska T1 - Erfolgskritische Faktoren in exemplarischen Building Information Modeling Anwendungsfällen: Eine Analyse unter der Beachtung schleppender Digitalisierung und organisationaler Veränderungen N2 - Die fortschreitende Digitalisierung lässt innovative bauprojekt- und unternehmensinterne Workflows sowie Organisationssysteme entstehen. In diesem Zusammenhang ist die digitale Fortentwicklung durch Building Information Modeling [BIM] als Veränderungsprozess zu definieren, der Organisationsstrukturen nachhaltig umformen wird. BIM ist die führende digitale Arbeitsmethodik im Bauwesen, die entwurfs-, ausführungs- und bauprojektbezogenen Belangen gerecht werden kann. Die deutsche Bauwirtschaft ist im Vergleich zu anderen Branchen jedoch als digital rückständig zu betrachten. Sie ist durch einen Markt gekennzeichnet, an dem kleine und mittelständische Unternehmen [KMU] in hoher Zahl vertreten sind. Aufgrund von Anwendungsunkenntnis der kleinen und mittelständischen Unternehmen fehlt der flächendeckende und durchgängige BIM-Einsatz in Projekten. Mit dem Fokus auf dem Bauprojekt als temporärer Organisation adressiert der vorliegende Forschungsschwerpunkt die Schaffung eines realistischen Abbilds erprobter BIM-Anwendungsfälle in Modellprojekten. Herausgearbeitet werden derzeit bestehende BIM-Herausforderungen für Erstanwender, die die durchgängige BIM-Anwendung in Deutschland bisher hemmen. Die Forschungsarbeit fokussiert sich auf die Evaluation erfolgskritischer Faktoren [ekF] in BIM-Anwendungsfällen [AWF] im Rahmen einer qualitativen Inhaltsanalyse. Die digitale Transformation birgt strukturrelevante Veränderungsdeterminanten für Organisationen durch die BIM-Anwendung und außerdem Herausforderungen, die in der Anwendungsfallforschung betrachtet werden. Die Zielstellung ist dreiteilig. Ein entwickeltes BIM-Strukturmodell erfasst die aktuelle Richtlinienarbeit sowie Standardisierung und stellt dadurch den Rahmen notwendiger BIM-Strukturen im Bauprojekt auf. Aus dem Strukturmodell ist ein Modell zur Prüfung von Anwendungsfallrisiken abgeleitet worden. Dieses wird auf gezielt recherchierte BIM-Modellprojekte in Deutschland angewendet, um aus den erfolgskritischen Faktoren der darin praktizierten BIM-Anwendungsfälle eine ekF-Risikomatrix abzuleiten. Daraus geht ein unterstützendes BIM-Anwendungsinstrument in Form von BPMN-Abläufen für KMU hervor. Resultierend aus der Verbindung des BIM-Strukturmodels und der Anwendungsfallanalyse wird in den einzelnen Ablaufübersichten eine Risikoverortung je Anwendungsfall kenntlich gemacht. Unternehmen ohne BIM-Anwendungsexpertise in Bauprojektorganisationen erhalten auf diese Weise einen instrumentellen und niederschwelligen Zugang zu BIM, um die kollaborativen und wirtschaftlichen Vorteile der digitalen Arbeitsmethodik nutzen zu können. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 41 KW - Building Information Modeling KW - Gebäudedaten-Modellierung KW - digitale Organisation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230302-49281 PB - Eigenverlag der Professur Baubetrieb und Bauverfahren CY - Weimar ER - TY - GEN A1 - Sidjimovska, Ivana T1 - Out of the Periphery. Museum of Solidarity N2 - The artistic research work is concerned with webs of transnational artistic solidarity, especially those ingrained in the Nonaligned Movement (NAM), which embraced differences and united them in a common anti-imperialist and anti-colonial fight. Taking the museum as an artefact of historically situated solidarity, the project examines the instruments of transnational art solidarity for conceiving, developing and implementing decolonial cultural practices today. The main research question regards thinking about whether and how the emancipatory potential of the transnational art solidarity can be extracted, recuperated and translated when dealing with present issues of cultural decolonisation. Three museums founded on the bases of international solidarity and donations of artworks form the case study. Consequently, the research findings are systematised in three discourses: The Autonomous Museum; The Decolonial Museum; and The Museum in Exile. N2 - Die künstlerische Forschungsarbeit befasst sich mit den Netzwerken der transnationalen künstlerischen Solidarität, insbesondere denen, die zwischen den Ländern des Globalen Südens zwischen den 1960er und den 1980er entstanden sind. Ausgehend von dem Museum als einem Artefakt historisch verankerter Solidarität untersucht das Projekt die Instrumente der transnationalen Kunstsolidarität für die Konzeption, Entwicklung und Umsetzung dekolonialer kultureller Praktiken heute. Die Hauptforschungsfrage besteht darin, ob und wie das emanzipatorische Potenzial der transnationalen Kunstsolidarität für die Auseinandersetzung mit aktuellen Fragen der kulturellen Dekolonisierung genutzt, zurückgewonnen und übersetzt werden kann. Drei Museen, die auf der Grundlage von Schenkungen von Kunstwerken gegründet wurden, bilden die Fallstudie. Folglich werden die Forschungsergebnisse in drei Diskursen systematisiert: Das autonome Museum, das dekoloniale Museum und das Museum im Exil. KW - Kunst KW - art solidarity KW - museum KW - decolonisation KW - Nonaligned Movement KW - Humboldt Forum KW - Museum KW - Entkolonialisierung KW - Bündnisfreiheit Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230228-49021 SP - 13 EP - 98 ER - TY - THES A1 - Dief, Shaima T1 - Ancient Egyptian Hybrid Deities in Visual Form as Mediator in Cultural Transmission N2 - The most fundamental understating of hybridization methodology takes the form of stable but dynamic notions, accumulated over time in the memory of individuals. Schematized and abstracted, the hybrids representation needs to be reproduced and reused in order to reconstruct and bring back other memories. Reinvented, or reused hybrids can support getting access to social, traditional, religious understanding of nations. In this manner, they take the form of the messenger / the mediator an innate, equivalent to the use of mental places in the art of memory. We remember mythology in order to remember other things. From individual memory perspective, or group collective memory, the act of recollection is assumed to be an individual act, biologically based in the brain, but by definition conditioned by social collectives. Following Halbwachs, this thesis does not recognize a dichotomy between individual and collective memory as two different types of remembering. Conversely, the collective is thought of as inherent to individual thought, questioning perspectives that regard individual recollection as isolated from social settings. The individual places himself in relation to the group and makes use of the collective frameworks of thought when he localizes and reconstructs the past, whether in private or in social settings. The frameworks of social relations, of time, and of space are constructs originating in social interaction and distributed in the memory of the group members. The individual has his own perspective on the collective frameworks of the group, and the group’s collective frameworks can be regarded as a common denominator of the individual outlooks on the framework. In acts of remembering, the individual may actualize the depicted symbols in memory, but he could also employ precepts from the environment. The latter have been referred to as material or external frameworks of memory, suggesting their similar role as catalysts for processes of remembrance such as that of the hybrids in my paintings. It is only with reference to the hybrids, who work as messengers / mediators with a dual nature, that communicate between the past and the present, the internal and external space, that individual memory and group memory is in focus. The exhibition at the Egyptian museum in Leipzig is my practical method to create a communicative memory, using hybrids as mediators in cultural transimission, as when the act refers to informal and everyday situations in which group members informally search for the past, it takes place in the communicative 162 memory. As explained in chapter one, the exhibition at the Egyptian museum in Leipzig is an act of remembering in search for the past with support of my paintings, which then can considered as part of the cultural memory. In addition to the theoretical framework summarized above, I have applied my hypothesis practically in the form of the public exhibition, and shared the methodology with public audience from Cairo / Egypt and Leipzig / German in the form of visual art workshops and open discussions. I have also suggested an analyzed description of the meaning of hybrids in my artwork as mediators and messengers for the purpose of cultural transmission, as well as in relation to other artists’ work and use of a similar concept. By using my hybrid creatures in my visual artwork, I am creating a bridge, mediators to represent both the past and the present, what we remember of the past, and how we understand the past. It is as explained in chapter two; that the hybridization methodology in terms of double membership represented in different cultures –Cairo / Egypt and Leipzig / Germany- can provide a framework which allows artistic discussions and could be individually interpreted, so individual cultures / individual memory can become transparent without losing their identities and turn into communicative memory. This transmission through the hybridization theoretical approech was explicitly clarified with the support of Krämer’s hypothesis. The practical attempt was examined by creating a relationship between the witness –me as an artist– and the audience –the exhibition visitors–, to cross space and time, not to bridge differences, rather to represent the contrasts transparently. The Kin-making proposition is adopted by many academics and scholars in modern society and theoretical research; the topic was represented in the roots of the ancient Egyptian mindset and supported theoretically by similar understandings such as Haraway’s definition of kin-making. The practical implementation of kin- making can be observed in many of my artwork and was analyzed visually and artistically in chapter three. My practical project outcome tested success by using hybrids in my paintings as mediators, it opened a communicative artistic discussion. This methodology gave a possible path of communication through paintings / visual analyses, and offered relativity through image self-interpretation. KW - Kollektives Gedächtnis KW - Kunst KW - Cultural memory KW - Communicative memory KW - Hybridization KW - Visual Art Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230220-49337 ER - TY - THES A1 - Wills, Nadine T1 - Modell bedarfsorientierter Leistungserbringung im FM auf Grundlage von Sensortechnologien und BIM N2 - Während der Digitalisierung im Bauwesen insbesondere im Bereich der Planungs- und Errichtungsphase von Bauwerken immer größere Aufmerksamkeit zuteilwird, ist das digitale Potenzial im Facility Management weit weniger ausgeschöpft, als dies möglich wäre. Vor dem Hintergrund, dass die Bewirtschaftung von Gebäuden jedoch einen wesentlichen Kostenanteil im Lebenszyklus darstellt, ist eine Fokussierung auf digitale Prozesse im Gebäudebetrieb erforderlich. Im Facility Management werden Dienstleistungen häufig verrichtungsorientiert, d. h. nach statischen Intervallen, oder bedarfsorientiert erbracht. Beide Arten der Leistungserbringung weisen Defizite auf, beispielweise weil Tätigkeiten auf Basis definierter Intervalle erbracht werden, ohne dass eine Notwendigkeit besteht oder weil bestehende Bedarfe mangels Möglichkeiten der Bedarfsermittlung nicht identifiziert werden. Speziell die Definition und Ermittlung eines Bedarfs zur Leistungserbringung ist häufig subjektiv geprägt. Auch sind Dienstleister oft nicht in frühen Phasen der Gebäudeplanung involviert und erhalten für ihre Dienstleistungen notwendige Daten und Informationen erst kurz vor Inbetriebnahme des zu betreibenden Gebäudes. Aktuelle Ansätze des Building Information Modeling (BIM) und die zunehmende Verfügbarkeit von Sensortechnologien in Gebäuden bieten Chancen, die o. g. Defizite zu beheben. In der vorliegenden Arbeit werden deshalb Datenmodelle und Methoden entwickelt, die mithilfe von BIM-basierten Datenbankstrukturen sowie Auswertungs- und Entscheidungsmethodiken Dienstleistungen der Gebäudebewirtschaftung objektiviert und automatisiert auslösen können. Der Fokus der Arbeit liegt dabei auf dem Facility Service der Reinigungs- und Pflegedienste des infrastrukturellen Facility Managements. Eine umfangreiche Recherche etablierter Normen und Standards sowie öffentlich zugänglicher Leistungsausschreibungen bilden die Grundlage der Definition erforderlicher Informationen zur Leistungserbringung. Die identifizierten statischen Gebäude- und Prozessinformationen werden in einem relationalen Datenbankmodell strukturiert, das nach einer Darstellung von Messgrößen und der Beschreibung des Vorgehens zur Auswahl geeigneter Sensoren für die Erfassung von Bedarfen, um Sensorinformationen erweitert wird. Um Messwerte verschiedener und bereits in Gebäuden existenten Sensoren für die Leistungsauslösung verwenden zu können, erfolgt die Implementierung einer Normierungsmethodik in das Datenbankmodell. Auf diese Weise kann der Bedarf zur Leistungserbringung ausgehend von Grenzwerten ermitteln werden. Auch sind Verknüpfungsmethoden zur Kombination verschiedener Anwendungen in dem Datenbankmodell integriert. Zusätzlich zur direkten Auslösung erforderlicher Aktivitäten ermöglicht das entwickelte Modell eine opportune Auslösung von Leistungen, d. h. eine Leistungserbringung vor dem eigentlich bestehenden Bedarf. Auf diese Weise können tätigkeitsähnliche oder räumlich nah beieinander liegende Tätigkeiten sinnvoll vorzeitig erbracht werden, um für den Dienstleister eine Wegstreckeneinsparung zu ermöglichen. Die Arbeit beschreibt zudem die für die Auswertung, Entscheidungsfindung und Auftragsüberwachung benötigen Algorithmen. Die Validierung des entwickelten Modells bedarfsorientierter Leistungserbringung erfolgt in einer relationalen Datenbank und zeigt simulativ für unterschiedliche Szenarien des Gebäudebetriebs, dass Bedarfsermittlungen auf Grundlage von Sensortechnologien erfolgen und Leistungen opportun ausgelöst, beauftragt und dokumentiert werden können. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 42 KW - Facility-Management KW - Building Information Modeling KW - Datenmodell KW - Sensor KW - Bedarfsermittlung KW - Sensortechnologien KW - Facility Management KW - FM-Leistungserbringung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230214-49248 PB - Eigenverlag der Professur Baubetrieb und Bauverfahren CY - Weimar ER - TY - THES A1 - Walther, Tino T1 - Ein Modell zur Optimierung der Bauleistungsfeststellung von Linienbaustellen N2 - Das Wissen um den realen Zustand eines Bauprojektes stellt eine entscheidende Kernkompetenz eines steuernden bauausführenden Unternehmens dar. Der bewusste Umgang mit Informationen und deren effiziente Nutzung sind entscheidende Erfolgsfaktoren für die zeit-, kosten- und qualitätsgerechte Realisierung von Bauprojekten. Obwohl die erforderlichen Erfolgsfaktoren bekannt sind, sind Kosten- und Terminüberschreitungen von Bauprojekten keine Seltenheit – eher das Gegenteil ist der Fall. Zukunftsweisende Digitalisierungsprojekte aber geben Anlass zu Hoffnung. Ein Beispiel ist der bereits im Dezember 2015 vom Bundesministerium für Verkehr und digitale Infrastruktur ins Leben gerufene Stufenplan Digitales Planen und Bauen. Dieser hat die Aufgabe flächendeckend die Methodik des Building Information Modeling (BIM) im Infrastrukturbereich einzuführen und somit die Digitalisierung in Deutschland zukunftsweisend voranzutreiben, indem erfolgreiche Bauprojekte mit durchgängigen Informationsflüssen arbeiten. Seither existiert eine Vielzahl an Digitalisierungsprojekten, alle mit gleichen Zielen. Nachweislich lassen sich hinsichtlich dessen allerdings auch vermehrt Defizite aufzeigen. So ist der Fortschritt sehr heterogen verteilt und lässt sich für die Branche nicht allgemeingültig festlegen. Mit einer internationalen Literaturrecherche sowie einer empirischen Studie als Untersuchungsmethode wurde in Form von Interviews mit Fachkundigen der tatsächliche Zustand der Digitalisierungs- und der BIM-Anwendungen im Straßenbau für den Controllingprozess der Bauleistungsfeststellung untersucht. Die erhobenen Daten wurden aufbereitet und anschließend softwaregestützt einer inhaltlichen Analyse unterzogen. In Kombination mit den Ergebnissen der Literaturrecherche wurden notwendige Anforderungen für den Controllingprozess der Bauleistungsfeststellung erhoben. Auf dieser Grundlage wurde ein Modell im Sinne der Systemtheorie zur Optimierung der Bauleistungsfeststellung entwickelt. Gegenstand der vorliegenden Arbeit ist die Integration der modellbasierten Arbeitsweise in die Prozesse der Bauleistungsfeststellung eines Bauunternehmens. Grundlage ist die objektive Auswertung des Fertigstellungsgrades (Baufortschrittes) mittels Luftbildaufnahmen. Deren Auswertung auf Basis eines Algorithmus und die systematische Identifikation des Baufortschrittes integriert in den Prozess der Bauleistungsfeststellung werden zu einem neu entwickelten Gesamtsystem mit dem Ergebnis eines optimierten Modells. Das entwickelte Modell wurde hinsichtlich Anwendbarkeit und praktischer Relevanz an ausgewählten Beispielszenarien untersucht und nachgewiesen. N2 - The knowledge of the real-time condition of a construction project represents a decisive core competence of a controlling construction company. The conscious handling and efficient use of information can contribute to and be decisive success factors for the timely, cost-efficient, and high-quality realization of construction projects. Despite the knowledge of the necessary success factors, cost and schedule overruns of construction projects are not uncommon, rather the opposite. Hope is shown by forward- looking digitalization projects. The implementation plan for digital planning and construction launched in December 2015 by the Federal Ministry of Transport and Digital Infrastructure. Its task is to introduce the Building Information Modelling (BIM) methodology across the board and to drive forward digitization in the entire construction industry and generate successful construction projects with a continuous flow of information. Since then, there have been numerous digitization projects, all with the same goal. However, it has been proven that there are also increasing deficits. For example, progress is very heterogeneously distributed, and it is not possible to make a general statement for the industry. Based on an international literature investigation and an empirical study as the underlying research method, the actual state of digitalization and BIM applications in road construction for the controlling process of construction performance assessment was examined in the form of qualitative interviews with professionals. The collected data was processed and then subjected to a software-based content analysis. Furthermore, a model was developed in the sense of the system theory for optimizing the construction performance assessment based on the previous research. The integration of the model-based determination of the construction performance of a construction company is the subject of this dissertation. The basis is the objective evaluation of the degree of completion (construction progress) by means of aerial photographs. The model- and algorithm-based evaluation of the construction progress combined with the systematic integration in the process of the construction performance assessment becomes a newly developed overall system with the result of an optimized model. The developed model was examined and proven regarding applicability and practical relevance in selected example scenarios. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 43 KW - Building Information Modeling KW - Building Information Modeling KW - Bauleistungsfeststellung KW - Leistungsmeldung KW - Controlling KW - Baubetrieb Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230210-49115 PB - Eigenverlag der Professur Baubetrieb und Bauverfahren CY - Weimar ER - TY - JOUR A1 - Alsaad, Hayder A1 - Schälte, Gereon A1 - Schneeweiß, Mario A1 - Becher, Lia A1 - Pollack, Moritz A1 - Gena, Amayu Wakoya A1 - Schweiker, Marcel A1 - Hartmann, Maria A1 - Voelker, Conrad A1 - Rossaint, Rolf A1 - Irrgang, Matthias T1 - The Spread of Exhaled Air and Aerosols during Physical Exercise JF - Journal of Clinical Medicine N2 - Physical exercise demonstrates a special case of aerosol emission due to its associated elevated breathing rate. This can lead to a faster spread of airborne viruses and respiratory diseases. Therefore, this study investigates cross-infection risk during training. Twelve human subjects exercised on a cycle ergometer under three mask scenarios: no mask, surgical mask, and FFP2 mask. The emitted aerosols were measured in a grey room with a measurement setup equipped with an optical particle sensor. The spread of expired air was qualitatively and quantitatively assessed using schlieren imaging. Moreover, user satisfaction surveys were conducted to evaluate the comfort of wearing face masks during training. The results indicated that both surgical and FFP2 masks significantly reduced particles emission with a reduction efficiency of 87.1% and 91.3% of all particle sizes, respectively. However, compared to surgical masks, FFP2 masks provided a nearly tenfold greater reduction of the particle size range with long residence time in the air (0.3–0.5 μm). Furthermore, the investigated masks reduced exhalation spreading distances to less than 0.15 m and 0.1 m in the case of the surgical mask and FFP2 mask, respectively. User satisfaction solely differed with respect to perceived dyspnea between no mask and FFP2 mask conditions. KW - Sport KW - Training KW - Fahrradergometer KW - sport KW - training KW - cycle ergometer KW - schlieren imaging KW - particles concentration KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230208-49262 UR - https://www.mdpi.com/2077-0383/12/4/1300 VL - 2023 IS - Volume 12, issue 4, article 1300 PB - Basel CY - MDPI ER - TY - JOUR A1 - Bapir, Baban A1 - Abrahamczyk, Lars A1 - Wichtmann, Torsten A1 - Prada-Sarmiento, Luis Felipe ED - Ozturk, Baki T1 - Soil-structure interaction: A state-of-the-art review of modeling techniques and studies on seismic response of building structures JF - Frontiers in Built Environment N2 - The present article aims to provide an overview of the consequences of dynamic soil-structure interaction (SSI) on building structures and the available modelling techniques to resolve SSI problems. The role of SSI has been traditionally considered beneficial to the response of structures. However, contemporary studies and evidence from past earthquakes showed detrimental effects of SSI in certain conditions. An overview of the related investigations and findings is presented and discussed in this article. Additionally, the main approaches to evaluate seismic soil-structure interaction problems with the commonly used modelling techniques and computational methods are highlighted. The strength, limitations, and application cases of each model are also discussed and compared. Moreover, the role of SSI in various design codes and global guidelines is summarized. Finally, the advancements and recent findings on the SSI effects on the seismic response of buildings with different structural systems and foundation types are presented. In addition, with the aim of helping new researchers to improve previous findings, the research gaps and future research tendencies in the SSI field are pointed out. KW - Boden-Bauwerk-Wechselwirkung KW - Bautechnik KW - Erdbeben KW - Grundlage KW - soil-structure interaction KW - structural engineering KW - earthquake engineering KW - foundations KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230206-49190 UR - https://www.frontiersin.org/articles/10.3389/fbuil.2023.1120351/full VL - 2023 IS - Volume 9 SP - 1 EP - 17 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Aicher, Andreas A1 - Börmel, Melanie A1 - Londong, Jörg A1 - Beier, Silvio T1 - Vertical green system for gray water treatment: Analysis of the VertiKKA-module in a field test JF - Frontiers in Environmental Science N2 - This work presents a modular Vertical Green System (VGS) for gray water treatment, developed at the Bauhaus-Universität Weimar. The concept was transformed into a field study with four modules built and tested with synthetic gray water. Each module set contains a small and larger module with the same treatment substrate and was fed hourly. A combination of lightweight structural material and biochar of agricultural residues and wood chips was used as the treatment substrate. In this article, we present the first 18 weeks of operation. Regarding the treatment efficiency, the parameters chemical oxygen demand (COD), total phosphorous (TP), ortho-phosphate (ortho-P), total bound nitrogen (TNb), ammonium nitrogen (NH4-N), and nitrate nitrogen (NO3-N) were analyzed and are presented in this work. The results of the modules with agricultural residues are promising. Up to 92% COD reduction is stated in the data. The phosphate and nitrogen fractions are reduced significantly in these modules. By contrast, the modules with wood chips reduce only 67% of the incoming COD and respectively less regarding phosphates and the nitrogen fraction. KW - Grauwasser KW - Abwassertechnologie KW - vertical green system KW - grey water treatment KW - urban heat island effect KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48840 UR - https://www.frontiersin.org/articles/10.3389/fenvs.2022.976005/full VL - 2022 IS - Volume 10 (2022), article 976005 SP - 1 EP - 7 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Coenen, Ekkehard T1 - Communicative Action, Objectifications, and the Triad of Violence JF - Human Studies N2 - This article aims to develop a social theory of violence that emphasizes the role of the third party as well as the communication between the involved subjects. For this Teresa Koloma Beck’s essay ‘The Eye of the Beholder: Violence as a Social Process’ is taken as a starting point, which adopts a social-constructivist perspective. On the one hand, the basic concepts and the benefits of this approach are presented. On the other hand, social-theoretical problems of this approach are revealed. These deficits are counteracted by expanding Koloma Beck’s approach with a communicative-constructivist framework. Thus, the role of communicative action and the ‘objectification of violence’ is emphasized. These aspects impact the perception, judgement and (de-)legitimation of violence phenomena and the emergence of a ‘knowledge of violence’. Communicative actions and objectifications form a key to understanding violent interactions and the link between the micro and macro levels. Finally, the methodological consequences for the research of violence and Communicative Constructivism are discussed. Furthermore, possible research fields are outlined, which open up by looking at communicative action and the objectifications within the ‘triads of violence’. KW - Gewalt KW - Soziologie KW - violence KW - social theory KW - communicative action KW - triad of violence Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48828 UR - https://link.springer.com/article/10.1007/s10746-022-09639-1 VL - 2022 IS - 45 (2022) SP - 447 EP - 468 PB - Springer Science + Business Media B.V CY - Dordrecht ER - TY - JOUR A1 - Stadler, Max T1 - Gründerzeit. Hightech und Alternativen der Wissenschaft in West-Berlin JF - NTM Zeitschrift für Geschichte der Wissenschaften, Technik und Medizin N2 - Zu den diversen Unternehmungen sozialbewegter „Gegenwissenschaft“, die um 1980 auf der Bildfläche der BRD erschienen, zählte der 1982 gegründete Berliner Wissenschaftsladen e. V., kurz WILAB – eine Art „alternatives“ Spin-off der Technischen Universität Berlin. Der vorliegende Beitrag situiert die Ausgründung des „Ladens“ im Kontext zeitgenössischer Fortschritte der (regionalen) Forschungs- und Technologiepolitik. Gezeigt wird, wie der deindustrialisierenden Inselstadt, qua „innovationspolitischer“ Gegensteuerung, dabei sogar eine gewisse Vorreiterrolle zukam: über die Stadtgrenzen hinaus sichtbare Neuerungen wie die Gründermesse BIG TECH oder das 1983 eröffnete Berliner Innovations- und Gründerzentrum (BIG), der erste „Incubator“ [sic] der BRD, etwa gingen auf das Konto der 1977/78 lancierten Technologie-Transferstelle der TU Berlin, TU-transfer. Anders gesagt: tendenziell bekam man es hier nun mit Verhältnissen zu tun, die immer weniger mit den Träumen einer „kritischen“, nicht-fremdbestimmten (Gegen‑)Wissenschaft kompatibel waren. Latent konträr zur historiographischen Prominenz des wissenschaftskritischen Zeitgeists fristeten „alternativen“ Zielsetzungen verpflichtete Unternehmungen wie „WILAB“ ein relativ marginalisiertes Nischendasein. Dennoch wirft das am WILAB verfolgte, so gesehen wenig aussichtsreiche Anliegen, eine andere, nämlich „humanere“ Informationstechnologie in die Wege zu leiten, ein instruktives Licht auf die Aufbrüche „unternehmerischer“ Wissenschaft in der BRD um 1980. KW - Berlin KW - Wissenschaftspolitik KW - Gegenwissenschaft KW - Gegenwissen KW - Informatik KW - Strukturkrise Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48800 UR - https://link.springer.com/article/10.1007/s00048-022-00352-9 VL - 2022 IS - 30 (2022) SP - 599 EP - 632 PB - Basel CY - Birkhäuser ER - TY - JOUR A1 - Hahlbrock, David A1 - Braun, Michael A1 - Heidel, Robin A1 - Lemmen, Patrik A1 - Boumann, Roland A1 - Bruckmann, Tobias A1 - Schramm, Dieter A1 - Helm, Volker A1 - Willmann, Jan T1 - Cable Robotic 3D-printing: additive manufacturing on the construction site JF - Construction Robotics N2 - This paper outlines an important step in characterizing a novel field of robotic construction research where a cable-driven parallel robot is used to extrude cementitious material in three-dimensional space, and thus offering a comprehensive new approach to computational design and construction, and to robotic fabrication at larger scales. Developed by the Faculty of Art and Design at Bauhaus-University Weimar (Germany), the faculty of Architecture at the University of Applied Sciences Dortmund (Germany) and the Chair of Mechatronics at the University of Duisburg-Essen (Germany), this approach offers unique advantages over existing additive manufacturing methods: the system is easily transportable and scalable, it does not require additional formwork or scaffolding, and it offers digital integration and informational oversight across the entire design and building process. This paper considers 1) key research components of cable robotic 3D-printing (such as computational design, material exploration, and robotic control), and 2) the integration of these parameters into a unified design and building process. The demonstration of the approach at full-scale is of particular concern. KW - Robotik KW - Automation KW - 3D-Printing KW - Cable-driven parallel robots Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48791 UR - https://link.springer.com/article/10.1007/s41693-022-00082-3 VL - 2022 SP - 1 EP - 14 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Moscoso, Caridad A1 - Kraus, Matthias T1 - On the Verification of Beams Subjected to Lateral Torsional Buckling by Simplified Plastic Structural Analysis JF - ce/papers N2 - Plastic structural analysis may be applied without any difficulty and with little effort for structural member verifications with regard to lateral torsional buckling of doubly symmetric rolled I sections. Suchlike analyses can be performed based on the plastic zone theory, specifically using finite beam elements with seven degrees of freedom and 2nd order theory considering material nonlinearity. The existing Eurocode enables these approaches and the coming-up generation will provide corresponding regulations in EN 1993-1-14. The investigations allow the determination of computationally accurate limit loads, which are determined in the present paper for selected structural systems with different sets of parameters, such as length, steel grade and cross section types. The results are compared to approximations gained by more sophisticated FEM analyses (commercial software Ansys Workbench applying solid elements) for reasons of verification/validation. In this course, differences in the results of the numerical models are addressed and discussed. In addition, results are compared to resistances obtained by common design regulations based on reduction factors χlt including regulations of EN 1993-1-1 (including German National Annex) as well as prEN 1993-1-1: 2020-08 (proposed new Eurocode generation). Concluding, correlations of results and their advantages as well as disadvantages are discussed. KW - Stahl KW - Träger KW - Robustheit KW - steel KW - stability KW - flexural-torsional-buckling Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48782 UR - https://onlinelibrary.wiley.com/doi/full/10.1002/cepa.1835 VL - 2022 IS - Volume 5, Issue 4 SP - 914 EP - 923 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Morawski, Tommaso T1 - La tavola e la mappa. Paradigmi per una metaforologia mediale dell’immaginazione cartografica in Kant JF - Philosophy Kitchen N2 - Immanuel Kant’s thought is a central historical and theoretical reference in Hans Blumenberg’s metaphorological project. This is demonstrated by the fact that in the Paradigms the author outlines the concept of absolute metaphor by explicitly referring to §59 of the Critique of the Power of Judgment and recognizing in the Kantian symbol a model for his own metaphorics. However, Kant’s name also appears in the chapter on the metaphor of the “terra incognita” that not only did he theorize the presence of symbolic hypotyposis in our language [...] but also made extensive use of metaphors linked to “determinate historical experiences”. In particular: geographical metaphors. In my essay, I would like to start from the analysis of Kant’s geographical metaphors in order to try to rethink Blumenberg’s archaeological method as an archaeology of media that grounds the study of metaphors in the materiality of communication and the combination of tools, agents and media. KW - Kant, Immanuel KW - Blumenberg, Hans KW - Metapher KW - Medienwissenschaft KW - Metaphorik KW - geografische Metapher KW - Medienarchäologie Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48766 UR - https://www.ojs.unito.it/index.php/philosophykitchen/article/view/7191 VL - 2022 IS - 17, II/2022 SP - 137 EP - 152 PB - Università degli Studi di Torino CY - Turino ER - TY - JOUR A1 - Buschow, Christopher A1 - Wellbrock, Christian-Mathias T1 - “Spotify for News”? User Perception of Subscription-Based Content Platforms for News Media JF - Journalism and Media N2 - Subscription-based news platforms (such as “Apple News+” or “Readly”) that bundle content from different publishers into one comprehensive package and offer it to media users at a fixed monthly rate are a new way of accessing and consuming digital journalism. These services have received little attention in journalism studies, although they differ greatly from traditional media products and distribution channels. This article empirically investigates the perception of journalism platforms based on eight qualitative focus group discussions with 55 German news consumers. Results show that the central characteristics these platforms should fulfill in order to attract users are strikingly similar to the characteristics of media platforms from the music and video industries, in particular regarding price points, contract features, and modes of usage. Against this background, the potential and perspectives of a subscription-based news platform for journalism’s societal role are discussed. KW - Journalistik KW - Journalismus KW - Nachrichtensendung KW - Online-Medien KW - audience studies KW - journalism products KW - content platforms Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48740 UR - https://www.mdpi.com/2673-5172/4/1/1 VL - 2022 IS - 2023, 4 SP - 1 EP - 15 PB - MDPI CY - Basel ER - TY - THES A1 - Neupert, Max T1 - Audiovisuelles Cut-Up N2 - This research identifies and examines the aesthetic phenomenon of extremely fast cut audiovisual media works. The term 'audiovisual cut-up' is proposed. The literary form of cut-up is described and compared to the characteristics of the reviewed phenomenon. A wide range of audiovisual works across different contexts is analyzed; all of which are sharing the same formal criteria of extremely short edits, including the authors contributions to the field. The technological tools facilitating the novel aesthetic are often crafted by the artists themselves because ready made solutions did not preexist. Audiovisual cut-ups are classified according to their contexts and mediums. Some observations are made regarding how audio and video essentially differ in their character, what the smallest perceivable unit is, and which role latencies and anticipation play in the perception of audiovisual media. Three main theses are made: 1. Audiovisual cut-up has the power to amplify small, previously hidden details and may be used to distort and deride the source material. 2. Technological advances have led to the development of audiovisual cut-up. 3. The aesthetic possibilities of cut-ups have become an integral part in the spectrum of possible audio-visual techniques. N2 - Diese Forschungsarbeit bezeichnet und analysiert ein ästhetisches Phänomen audiovisueller Arbeiten mit sehr schnellen Schnitten. Der Begriff „Audiovisuelles Cut-Up“ wird vorgeschlagen um dieses Phänomen zu bezeichnen. Verschiedenste audiovisuelle Arbeiten aus unterschiedlichen Kontexten werden analysiert, welche das formale Kriterium von extrem kurzen Einstellungen erfüllen – einschließlich der eigenen Forschungsbeiträge des Autors. Die Werkzeuge und Technologien, welche die neuartige Ästhetik ermöglichten werden vorgestellt. Oftmals wurden diese von den Künstlern selbst geschaffen, da fertige Lösungen nicht verfügbar waren. Audiovisuelle Cut-Ups werden nach Kontext und Medium systematisiert und verortet. Es schließen sich Beobachtungen an, in wie fern Audio und Video sich in ihrem Charakter unterscheiden, was die kleinste wahrnehmbare Einheit ist und welche Rolle Latenzen und Antizipation bei der Wahrnehmung von audiovisuellen Medien spielen. Drei Hauptthesen werden Aufgestellt: 1. Audiovisuelles Cut-Up hat die Kraft winzige, vormals überdeckte Details deutlich zu machen. Damit kann es das Quellmaterial verdichten aber auch den Inhalt manipulieren. 2. Technische Entwicklungen haben das audiovisuelle Cut-Up hervorgerufen. 3. Heute ist die Ästhetik als ein Stilmittel im Werkzeugkasten audiovisueller Gestaltung etabliert. KW - Medienkunst KW - Video KW - Experimentalfilm KW - Musikvideo KW - Werbung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230123-48968 ER - TY - THES A1 - Remus, Ricardo T1 - Ultraschallgestützte Betonherstellung. Konzept für eine ressourcenschonende Betonproduktion N2 - Aktuell findet aufgrund gesellschaftspolitischer Forderungen in vielen Industriezweigen ein Umdenken in Richtung Effizienz und Ökologie aber auch Digitalisierung und Industrie 4.0 statt. In dieser Hinsicht steht die Bauindustrie, im Vergleich zu Industrien wie IT, Automobil- oder Maschinenbau, noch am Anfang. Dabei sind die Potentiale zur Einsparung und Optimierung gerade in der Bauindustrie aufgrund der großen Mengen an zu verarbeiteten Materialien besonders hoch. Die internationale Ressourcen- und Klimadebatte führt verstärkt dazu, dass auch in der Zement- und Betonherstellung neue Konzepte erstellt und geprüft werden. Einerseits erfolgt intensive Forschung und Entwicklung im Bereich alternativer, klimafreundlicher Zemente. Andererseits werden auch auf Seiten der Betonherstellung innovative materialsparende Konzepte geprüft, wie die aktuelle Entwicklung von 3D-Druck mit Beton zeigt. Aufgrund der hohen Anforderungen an Konstruktion, Qualität und Langlebigkeit von Bauwerken, besitzen Betonfertigteile oftmals Vorteile gegenüber Ortbeton. Die hohe Oberflächenqualität und Dauerhaftigkeit aber auch die Gleichmäßigkeit und witterungsunabhängige Herstellung sind Merkmale, die im Zusammenhang mit Betonfertigteilen immer wieder erwähnt werden. Dabei ist es essenziell, dass auch der Betonherstellungsprozess im Fertigteilwerk kritisch hinterfragt wird, damit eine effizientere und nachhaltigere Produktion von Betonfertigteilen möglich wird. Bei der Herstellung von Betonteilen im Fertigteilwerk liegt ein besonderer Fokus auf der Optimierung der Frühfestigkeitsentwicklung. Hohe Frühfestigkeiten sind Voraussetzung für einen hochfrequenten Schalungszyklus, was Arbeiten im 2- bzw. 3-Schichtbetrieb ermöglicht. Oft werden zur Sicherstellung hoher Frühfestigkeiten hochreaktive Zemente in Kombination mit hohen Zementgehalten im Beton und/oder einer Wärmebehandlung eingesetzt. Unter dieser Prämisse ist eine ökologisch nachhaltige Betonproduktion mit verminderter CO2 Bilanz nicht möglich. In der vorliegenden Arbeit wird ein neues Verfahren zur Beschleunigung von Beton eingeführt. Hierbei werden die Bestandteile Zement und Wasser (Zementsuspension) mit Ultraschall vorbehandelt. Ausgangspunkt der Arbeit sind vorangegangene Untersuchungen zum Einfluss von Ultraschall auf die Hydration von Zement bzw. dessen Hauptbestandteil Tricalciumsilikat (C3S), die im Rahmen dieser Arbeit weiter vertieft werden. Darüber hinaus wird die Produktion von Beton mit Ultraschall im Technikumsmaßstab betrachtet. Die so erlangten Erfahrungen dienten dazu, das Ultraschall-Betonmischsystem weiterzuentwickeln und erstmalig zur industriellen Betonproduktion zu nutzen. In der vorliegenden Arbeit werden die Auswirkungen von Ultraschall auf die Hydratation von C3S zunächst weitergehend und grundlegend untersucht. Dies erfolgte mittels Messung der elektrischen Leitfähigkeit, Analyse der Ionenkonzentration (ICP-OES), Thermoanalyse, Messung der BET-Oberfläche sowie einer optischen Auswertung mittels Rasterelektronenmikroskopie (REM). Der Fokus liegt auf den ersten Stunden der Hydratation, also der Zeit, die durch die Ultraschallbehandlung am stärksten beeinflusst wird. In den Untersuchungen zeigt sich, dass die Beschleunigungswirkung von Ultraschall in verdünnten C3S Suspensionen (w/f-Wert = 50) stark von der Portlanditkonzentration der Lösung abhängt. Je niedriger die Portlanditkonzentration, desto größer ist die Beschleunigung. Ergänzende Untersuchungen der Ionenkonzentration der Lösung sowie Untersuchungen am hydratisierten C3S zeigen, dass unmittelbar nach der Beschallung (nach ca. 15 Minuten Hydratation) erste Hydratphasen vorliegen. Die durch Ultraschall initiiere Beschleunigung ist in den ersten 24 Stunden am stärksten und klingt dann sukzessive ab. Die Untersuchungen schließen mit Experimenten an C3S-Pasten (w/f-Wert = 0,50), die die Beobachtungen an den verdünnten Suspensionen bestätigen und infolge der Beschallung ein früheres Auftreten und einen größeren Anteil an C-S-H Phasen zeigen. Es wird gefolgert, dass die unmittelbar infolge von Ultraschall erzeugten C-S-H Phasen als Kristallisationskeim während der folgenden Reaktion dienen und daher Ultraschall als in-situ Keimbildungstechnik angesehen werden kann. Optisch zeigt sich, dass die C-S-H Phasen der beschallten Pasten nicht nur viel früher auftreten, sondern kleiner sind und fein verteilt über die Oberfläche des C3S vorliegen. Auch dieser Effekt wird als vorteilhaft für den sich anschließenden regulären Strukturaufbau angesehen. Im nächsten Schritt wird daher der Untersuchungsfokus vom Modellsystem mit C3S auf Portlandzement erweitert. Hierbei wird der Frage nachgegangen, wie sich eine Änderung der Zusammensetzung der Zementsuspension (w/z-Wert, Fließmittelmenge) beziehungsweise eine Änderung des Ultraschallenergieeintrag auf die Fließeigenschaften und das Erhärtungsverhalten auswirken. Um den Einfluss verschiedener Faktoren gleichzeitig zu betrachten, werden mit Hilfe von statistischen Versuchsplänen Modelle erstellt, die das Verhalten der einzelnen Faktoren beschreiben. Zur Beschreibung der Fließeigenschaften wurde das Setzfließ- und Ausbreitmaß von Zementsuspensionen herangezogen. Die Beschleunigung der Erhärtung wurde mit Hilfe der Ermittlung des Zeitpunkts des normalen Erstarrens der Zementsuspension bestimmt. Die Ergebnisse dieser Untersuchungen zeigen deutlich, dass die Fließeigenschaften und der Erstarrungsbeginn nicht linear mit steigendem Ultraschall-Energieeintrag verändert werden. Es zeigt sich, dass es besonders bei den Verarbeitungseigenschaften der Portlandzementsuspensionen zur Ausbildung eines spezifischen Energieeintrages kommt, bis zu welchem das Setzfließ- und das Ausbreitmaß erhöht werden. Bei Überschreiten dieses Punktes, der als kritischer Energieeintrag definiert wurde, nimmt das Setzfließ- und Ausbreitmaß wieder ab. Das Auftreten dieses Punktes ist im besonderen Maße abhängig vom w/z-Wert. Mit sinkendem w/z-Wert wird der Energieeintrag, der eine Verbesserung der Fließeigenschaften hervorruft, reduziert. Bei sehr niedrigen w/z-Werten (< 0,35), kann keine Verbesserung mehr beobachtet werden. Wird Fließmittel vor der Beschallung zur Zementsuspension zugegeben, können die Eigenschaften der Zementsuspension maßgeblich beeinflusst werden. In beschallten Suspensionen mit Fließmittel, konnte in Abhängigkeit des Energieeintrages die fließmittelbedingte Verzögerung des Erstarrungsbeginns deutlich reduziert werden. Weiterhin zeigt sich, dass der Energieeintrag, der notwendig ist um den Erstarrungsbeginn um einen festen Betrag zu reduzieren, bei Suspensionen mit Fließmittel deutlich reduziert ist. Auf Grundlage der Beobachtungen an Zementsuspensionen wird der Einfluss von Ultraschall in einen dispergierenden und einen beschleunigenden Effekt unterteilt. Bei hohen w/z-Werten dominiert der dispergierende Einfluss von Ultraschall und der Erstarrungsbeginn wird moderat verkürzt. Bei niedrigeren w/z-Werten der Zementsuspension, dominiert der beschleunigende Effekt wobei kein oder sogar ein negativer Einfluss auf die Verarbeitungseigenschaften beobachtet werden kann. Im nächsten Schritt werden die Untersuchungen auf den Betonmaßstab mit Hilfe einer Technikumsanlage erweitert und der Einfluss eines zweistufigen Mischens (also dem Herstellen einer Zementsuspension im ersten Schritt und dem darauffolgenden Vermischen mit der Gesteinskörnung im zweiten Schritt) mit Ultraschall auf die Frisch- und Festbetoneigenschaften betrachtet. Durch die Anlagentechnik, die mit der Beschallung größerer Mengen Zementsuspension einhergeht, kommen weitere Einflussfaktoren auf die Zementsuspension hinzu (z. B. Pumpgeschwindigkeit, Temperatur, Druck). Im Rahmen der Untersuchungen wurde eine Betonrezeptur mit und ohne Ultraschall hergestellt und die Frisch- und Festbetoneigenschaften verglichen. Darüber hinaus wurde ein umfangreiches Untersuchungsprogramm zur Ermittlung wesentlicher Dauerhaftigkeitsparameter durchgeführt. Aufbauend auf den Erfahrungen mit der Technikumsanlage wurde das Ultraschall-Vormischsystem in mehreren Stufen weiterentwickelt und abschließend in einem Betonwerk zur Betonproduktion verwendet. Die Untersuchungen am Beton zeigen eine deutliche Steigerung der Frühdruckfestigkeiten des Portlandzementbetons. Hierbei kann die zum Entschalen von Betonbauteilen notwendige Druckfestigkeit von 15 MPa deutlich früher erreicht werden. Das Ausbreitmaß der Betone (w/z-Wert = 0,47) wird infolge der Beschallung leicht reduziert, was sich mit den Ergebnissen aus den Untersuchungen an reinen Zementsuspensionen deckt. Bei Applikation eines Überdruckes in der Beschallkammer oder einer Kühlung der Suspension während der Beschallung, kann das Ausbreitmaß leicht gesteigert werden. Allerdings werden die hohen Frühdruckfestigkeiten der ungekühlten beziehungsweise drucklosen Variante nicht mehr erreicht. In den Untersuchungen kann gezeigt werden, dass das Potential durch die Ultraschall-Beschleunigung genutzt werden kann, um entweder die Festigkeitsklasse des Zementes leitungsneutral zu reduzieren (von CEM I 52,5 R auf CEM I 42,5 R) oder eine 4-stündige Wärmebehandlung vollständig zu substituieren. Die Dauerhaftigkeit der Betone wird dabei nicht negativ beeinflusst. In den Untersuchungen zum Sulfat-, Karbonatisierung-, Chlorideindring- oder Frost/Tauwiderstand kann weder ein positiver noch ein negativer Einfluss durch die Beschallung abgeleitet werden. Ebenso kann in einer Untersuchung zur Alkali-Kieselsäure-Reaktion kein negativer Einfluss durch die Ultraschallbehandlung beobachtet werden. In den darauf aufbauenden Untersuchungen wird die Anlagentechnik weiterentwickelt, um die Ultraschallbehandlung stärker an eine reale Betonproduktion anzupassen. In der ersten Iterationsstufe wird das in den Betonuntersuchungen verwendete Anlagenkonzept 1 modifiziert (von der In-line-Beschallung zur Batch-Beschallung) und als Analgenkonzept 2 für weitere Untersuchungen genutzt. Hierbei wird eine neue Betonrezeptur mit höherem w/z-Wert (0,52) verwendet, wobei die Druckfestigkeiten ebenfalls deutlich gesteigert werden können. Im Gegensatz zum ersten Beton, wird das Ausbreitmaß dieser Betonzusammensetzung gesteigert, was zur Reduktion von Fließmittel genutzt wird. Dies deckt sich ebenfalls mit den Beobachtungen an reinen Portlandzementsuspensionen, wo eine deutliche Verbesserung der Fließfähigkeit bei höheren w/z-Werten beschrieben wird. Für diese Betonrezeptur wird ein Vergleich mit einem kommerziell erhältlichen Erhärtungsbeschleuniger (synthetische C-S-H-Keime) angestellt. Hierbei zeigt sich, dass die Beschleunigungswirkung beider Technologien vergleichbar ist. Eine Kombination beider Technologien führt zu einer weiteren deutlichen Steigerung der Frühfestigkeiten, so dass hier von einem synergistischen Effekt ausgegangen werden kann. In der letzten Iterationsstufe, dem Anlagenkonzept 3, wird beschrieben, wie das Mischsystem im Rahmen einer universitären Ausgründung signifikant weiterentwickelt wird und erstmals in einem Betonwerk zur Betonproduktion verwendet wird. Bei den Überlegungen zur Weiterentwicklung des Ultraschall-Mischsystems wird der Fokus auf die Praktikabilität gelegt und gezeigt, dass das ultraschallgestütze Mischsystem die Druckfestigkeitsentwicklung auch im Werksmaßstab deutlich beschleunigen kann. Damit ist die Voraussetzung für eine ökologisch nachhaltige Optimierung eines Fertigteilbetons unter realen Produktionsbedingungen geschaffen worden. N2 - In the past years efficiency and sustainability as well as digitalization has come into focus for many different industries due to environmental and cultural changes. Compared to industries like IT, automotive or machine manufacturing, the building industry is still at the very beginning. Although, due to the large quantities of materials processed, the potential for savings and optimization is especially high in the construction industry. The international discussion on resources and climate is increasingly leading to new concepts being developed and tested in cement and concrete production. On one hand, intensive research and development is taking place in the area of alternative, climate-friendly cements. On the other hand, innovative concepts, like for example 3D-printing, are being tested in concrete production. Due to the construction, quality and durability requirements of buildings, precast concrete elements often have advantages compared to ready-mixed concrete. The high surface quality, durability, as well as the uniformity and weather-independent production are advantages that are repeatedly mentioned when speaking about precast concrete elements. It is necessary though, to discuss the concrete production process in the precast plant to make an efficient and sustainable production of precast concrete elements possible. Precast concrete producers mainly focus on optimizing early strength development. Fast hardening concrete is required for the demolding cycle, to enable shift work in production. Often, to ensure high early strengths, highly reactive cements are used in combination with high cement contents in the concrete and/or heat treatment. This contradicts a sustainable concrete concept. In this thesis, a new method for mixing concrete is discussed. Here, the reactive components of the concrete, cement and water, are pre-treated with ultrasound. Previous investigations on the influence of ultrasound on C3S and cement are the starting point of this work. These are further investigated in as part of this work. Furthermore, the production of concrete with ultrasound is investigated in a pilot scale. The gained experiences were used to further develop the ultrasonic concrete mixing system. Finally, the application of this technology in industrial concrete production is discussed. In this work, the effects of ultrasound on the hydration of C3S are further investigated. For this purpose, the hydration of sonicated suspensions is monitored by measuring the electrical conductivity, analysing the ion concentration by means of ICP-OES, thermal analysis, measuring the BET surface and an optical evaluation by means of scanning electron microscopy (SEM). The focus is on the first hours of hydration. During this time the hydration is most strongly influenced by the ultrasound treatment. The investigations show that the acceleration effect in diluted suspensions (w/s value = 50) is strongly dependent on the portlandite concentration of the solution. The lower the portlandite concentration, the greater the acceleration. Supplementary investigations of the ion concentration of the solution as well as investigations on hydrated C3S show, that first hydrate phases are observable immediately after sonication. The acceleration induced by ultrasound is strongest within the first 24 hours, gradually decreasing beyond this time. The investigations are concluded with experiments on C3S pastes (w/f value = 0.50), which confirm the observations on the diluted suspensions and show an earlier appearance and a greater number of C-S-H phases as a result of sonication. Visually, the C-S-H phases of the sonicated pastes do not only appear much earlier, they are also smaller and finely distributed over the surface of the C3S. In the next step, the focus of the investigation is extended from the model system with C3S to Portland cement. The question to be discussed is how different compositions of the cement suspension (w/c-ratio, amount of superplasticiser) or a change in the ultrasonic energy input affects the flow properties and the hardening behaviour. To consider the influence of different factors simultaneously, models are developed with design of experiments (DoE), which describes the behavior of the individual factors. To describe the workability, the slump of cement suspensions was determined. The acceleration of setting was measured by determining the time of normal setting of the cement suspension. The results of these investigations clearly show that the flow properties and the set time do not change linearly with increasing energy input. It is shown that there is a threshold of the specific energy input up to which the slump is increased. When this point, which is defined as the critical energy input, is exceeded, the slump decreased. The occurrence of this point is particularly dependent on the w/c ratio. As the w/c ratio decreases, the energy input that causes an improvement in the flow properties is reduced. At very low w/c-values (< 0.35), no improvement can be observed. If superplasticiser is added to the cement suspension before sonication, the properties of the cement suspension can be significantly influenced. In sonicated suspensions with superplasticiser, the superplasticiser-induced delay of the set time could be significantly reduced depending on the energy input. Furthermore, the energy input required to reduce the time of solidification is significantly reduced in suspensions with superplasticiser. Based on the observations on cement suspensions, the influence of ultrasound is divided into a dispersing and an accelerating effect. At high w/c-values, the dispersing effect of ultrasound dominates, and the set time is moderately decreased. At lower w/c-values of the cement suspension, the accelerating effect dominates, whereas no or even a negative influence on the workability can be observed. In the next step, the investigations will be extended to the concrete scale with the help of a laboratory plant. Here, the influence of two-stage mixing with ultrasound on the fresh and hardened concrete properties will be discussed. Due to the system set up, which goes hand in hand with the sonication of larger quantities of cement suspension, added further influencing factors to the cement suspension (e.g., Pumping speed, temperature, pressure). As part of the investigations, a concrete composition was produced with as well as without ultrasonic premixing and the fresh and hardened concrete properties were compared. In addition, a comprehensive investigation programme was undertaken to determine essential durability parameters. Based on the experiences with the laboratory device, the ultrasonic premixing system was further developed in several stages and finally used in an industrial concrete plant for concrete production. The results of the concrete investigations examine a significant increase in the early compressive strengths of Portland cement concrete. Here, the compressive strength of 15 MPa, which is required for stripping of concrete components, can be achieved significantly earlier. The slump of the concretes (w/c-value = 0.47) is slightly decreased as a result of sonication, which is in accordance with the results of the investigations on cement suspensions. If an overpressure is applied in the sonication chamber or the suspension is cooled during sonication, the slump can be slightly increased. However, the high early compressive strengths of the non-cooled or non-pressured concrete are no longer achieved. the investigations show that the acceleration potential can be used to either reduce the strength class of the cement without performance loss (e. g. from CEM I 52.5 R to CEM I 42.5 R) or to completely substitute a 4-hour heat treatment. The durability of the concrete is not affected. In the investigations on sulphate, carbonation, chloride penetration or freeze/thaw resistance, neither a positive nor a negative influence can be derived from sonication. Likewise, in an investigation on alkali-silica reaction, no negative influence can be observed due to ultrasonic premixing. Based on these investigations, the ultrasound mixing technology will be further developed in order to decrease the gap between laboratory and industrial production. In the first iteration, the system concept 1 used in the concrete investigations will be modified and used subsequently as system concept 2 for further tests. Here, a new concrete composition with a higher w/c ratio (0.52) is used, through which the compressive strengths can also be significantly increased. In contrast to the first concrete, the slump of this concrete composition is increased, which is used to reduce superplasticiser. This is also in accordance with the observations on Portland cement suspensions, where a clear improvement of the flowability at higher w/c-values is described. For this concrete formulation, a comparison is made with a commercially available hardening accelerator (synthetic C-S-H-seeds). The results show that the acceleration effect of both technologies is comparable. A combination of both technologies leads to a further significant increase in early strength, so a synergistic effect can be assumed. The last iteration stage, the system concept 3, describes how the mixing system is significantly developed within a university spin-off and is used for the first time in a concrete plant for concrete production. The conceptual design of the ultrasonic mixing system for industrial application, focusses on the practicability.it is shown that the mixing system can significantly accelerate the compressive strength development, even in an industrial scale. These results paves the way for optimising precast concrete in terms of sustainability. KW - Beton KW - Beton KW - Nachhaltigkeit KW - Ultraschall Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48919 ER - TY - RPRT A1 - Müller, Christoph A1 - Seidel, Maik A1 - Ludwig, Horst-Michael A1 - Müller, Matthias T1 - Prüfung des Frost-Tausalz-Widerstandes von Beton für die Expositionsklasse XF2 N2 - In cold and moderate climates concrete can be subjected to a combined salt frost attack, which can cause scaling damage. Consequently, numerous test procedures were developed to determine the resistance of concrete compositions against this kind of attack. These tests typically mimic a severe attack with high levels of saturation, e.g. as for concrete pavements. Very few approaches exist for testing the salt frost scaling resistance of concretes, which are subjected only to medium levels of saturation, as such concrete elements typically don’t show notable scaling damage. However, the increasing use of low carbon cements with high clinker substitution rates might affect the salt frost scaling resistance of such concrete elements to some extent. To ensure adequate durability of such concretes it is thus desirable to determine their performance in an actual test procedure instead of relying on past experience. Thus, less severe test methods was developed, which are based on the Slab test and the CDF test, repectively. N2 - In kalten und gemäßigten Klimazonen kann Beton einem kombinierten Frost-Tausalz-Angriff ausgesetzt sein, der zu Schäden in Form von Abwitterungen führen kann. Daher wurden zahlreiche Prüfverfahren entwickelt, um die Widerstandsfähigkeit von Betonzusammensetzungen gegen diese Art des Angriffs zu bestimmen. Diese Tests simulieren in der Regel einen starken Angriff mit hohen Sättigungsgraden, wie z. B. bei Betonfahrbahnen. Es gibt nur sehr wenige Ansätze für die Prüfung des Widerstands von Betonen, die nur einem mittleren Sättigungsgrad ausgesetzt sind, da solche Betonelemente in der Regel keine nennenswerten Abwitterungen aufweisen. Die zunehmende Verwendung von klinkereffizienten Zementen könnte sich jedoch in gewissem Maße auf den Frost-Tausalz-Widerstand solcher Betonelemente auswirken. Um eine angemessene Dauerhaftigkeit zu gewährleisten ist es daher wünschenswert, ihre Leistungsfähigkeit in einem tatsächlichen Prüfverfahren zu ermitteln, anstatt sich auf Erfahrungswerte zu verlassen. Daher wurden Ansätze für abgeschwächte Prüfverfahren entwickelt, die auf dem Slab-Test bzw. dem CDF-Test beruhen. KW - Beton KW - Frost KW - Prüfverfahren KW - Beton KW - Frost-Tausalz-Widerstand KW - XF2 KW - CDF KW - Slab-Test Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240226-48877 ER - TY - CHAP A1 - Gründel, Hendrik A1 - Ludwig, Horst-Michael A1 - Geisenhanslüke, Carsten A1 - Müller, Matthias T1 - Einfluss der Zusammensetzung von Portlandzementklinker und Sulfatträger auf das Erstarrungsverhalten von Spritzbeton T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung : 16.-18. September 2015, Weimar N2 - In der vorliegenden Studie wurde der Einfluss der Klinkerzusammensetzung sowie der Sulfatträgerart auf die Leistungsfähigkeit eines Spritzzementes untersucht. Um eine Untersulfatisierung im System mit einen Aluminiumsulfat / -hydroxid Beschleuniger zu vermeiden, sollte ein anhydritbasierter Sulfatträger eingesetzt werden. Dies führt zu einer besseren Festigkeitsentwicklung im jungen Alter. N2 - In the present study, the influence of the clinker composition as well as the setting agent type on the performance of a sprayed cement was investigated. To avoid undersulfatization in the system with an aluminum sulfate/hydroxide accelerator, an anhydrite-based setting agent should be used. This leads to a better strength development at a young age. KW - Beton KW - Spritzbeton KW - Zement KW - Spritzbeton KW - Spritzzement KW - Sulfatträger KW - Sprayed concrete KW - Setting agent Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48851 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) ER - TY - INPR A1 - Schwendner, Sascha A1 - Fischer, Jens A1 - Seim, Werner A1 - Engelmann, Iris T1 - Nägel im Holzbau – Die Erforschung des Trag- und Verformungsverhaltens N2 - Die Tragfähigkeit von Nägeln und Nagelverbindungen im Holzbau war lange Zeit ausschließlich über Tabellen, die auf experimentellen Untersuchungen basierten, geregelt. In den letzten 100 Jahren untersuchten unterschiedliche Forscher das Last-Verformungsverhalten dieser Verbindungen und entwickelten Modelle, mit denen auf Grundlage von analytischen Gleichungen die Tragfähigkeit und das Verformungsverhalten von Nägeln berechnet werden kann. Die zunächst in Not- und Sparkonstruktion eingesetzten Nägel werden heutzutage vor allem bei Tafelelementen verwendet. Im Bestand finden sich aber auch zahlreiche, teils weit gespannte Fachwerkkonstruktionen. In dem folgenden Beitrag werden die Erforschung und Entwicklung der Tragfähigkeit sowie des Verformungsverhaltens von genagelten Verbindungen detailliert und strukturiert erläutert. Die zugehörigen Meilensteine werden genauer betrachtet. Über unterschiedliche Methoden für die Bestimmung der Tragfähigkeit sowie mechanische Phänomene, die erst nach und nach entdeckt wurden, können in der aktuellen Normung sehr individuelle Verbindungen nachgewiesen und deren Verhalten beschrieben werden. Tabellen und Grafiken verdeutlichen die einzelnen Meilensteine der geschichtlichen Entwicklung und vergleichen konkret die normativen Regelungen seit Beginn der Einführung des Nagels in den Ingenieurholzbau in Deutschland. Hierbei kann gezeigt werden, dass einige Definitionen seit 1933 bis heute noch ihre Gültigkeit behalten. N2 - For a long time, the load-carrying capacity of nails and nail connections in timber structures was regulated only by tables based on experimental investigations. In the last 100 years, different researchers investigated the load-deformation behaviour of these connections and developed models with which the load-carrying capacity and deformation behaviour of nails can be estimated very precisely on the basis of analytical equations. At first used in material saving construction in economical difficult times, nails are nowadays ever-present in modern engineered timber structures. In the following article, the research and development of nail load-carrying capacity and its deformation behaviour will be basically explained, and the milestones will be examined in detail. Using different methods to consider mechanical phenomena, which were only discovered over time, individual connections can be verified in the current standards and their behaviour can be described. Tables and graphics illustrate the milestones of the historical development and specifically compare the normative regulations since the introduction of the nail in engineered timber construction in Germany. Here it can be shown that some definitions since 1933 still retain their relevance today. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48904 N1 - This is the pre-peer reviewed version. ER - TY - INPR A1 - Fischer, Jens A1 - Schwendner, Sascha A1 - Seim, Werner A1 - Engelmann, Iris T1 - Verbindungen mit Nägeln im Holzbau – Die Erforschung und Entwicklung von Konstruktionsregeln N2 - Der Nagel als tragendes Holzverbindungsmittel ist heute gut bekannt. Doch noch vor 100 Jahren war das anders: sein statisch konstruktiver Gebrauch war verboten. Das änderte sich mit Beginn dessen Erforschung Ende der 1920er Jahre. Seit 1933 ist der Nagel Bestandteil der deutschen Regelwerke und findet seitdem breite Verwendung. Über weite Teile des 20. Jahrhunderts diente er in Not- und Sparkonstruktionen wie Brett- und Bohlenbindern als hocheffizientes Verbindungsmittel der Wahl. Diese materialsparenden Tragwerke waren bei der periodisch im-mer wiederkehrenden Ressourcenknappheit sehr gefragt und sind ein wichtiger Bestandteil der Konstruktionsgeschichte des Holzbaus. In dem folgenden Beitrag wird die Erforschung des Na-geltragverhaltens und die einhergehende fortlaufende Normierung behandelt. Die Errungen-schaften einzelner Forschungsvorhaben werden vorgestellt. Anhand eines Zeitstrahls werden Zusammenhänge zwischen Forschung und Normung gezeigt. Tabellen und Grafiken verdeutli-chen die Änderungen innerhalb der Normen von der ersten DIN 1052 im Jahr 1933 über die erste eigenständige Holzbaunorm in der DDR, der TGL 112-0730, aus 1963 bis zur DIN 1052- 1988. Dabei wird immer Bezug zum derzeitigen Entwurf des Eurocode 5 genommen. Allgemein zeigt sich, dass ein Großteil der heutigen Kenntnisse immer noch auf die Grundlagenforschung der 1930er Jahre zurückgeht. N2 - The nail as a load-bearing timber fastener is well known today. But 100 years ago, it was different: its structural use was not allowed. This changed with the beginning of systematical research at the end of the 1920s. Since 1933, the nail has been part of the German regulations and has been widely used ever since. For much of the 20th century, it served as the highly efficient fastener of choice especially in roof structures such as board and plank trusses. These material-saving load-bearing structural elements were always in demand due to the periodically recurring scarcity of material resources and are an important part in con-struction history. The following article deals with the research of the load-bearing behaviour of nails and the standardisation that has constantly accompanied it. The achievements of individual research projects are presented. A timeline shows the connections between research and standardisation. Tables and graphics illustrate the changes within the standards from the first DIN 1052 in 1933 to the first independent timber construction standard in the DDR, TGL 112-0730, from 1963 to DIN 1052-1988. Reference is al-ways made to the Eurocode 5 valid today. In general, it can be seen that a large part of today's knowledge still goes back to the basic research of the 1930s. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48893 N1 - This is the pre-peer reviewed version. ER - TY - INPR A1 - Engelmann, Iris A1 - Schwendner, Sascha A1 - Seim, Werner T1 - Materialsparende Nagelbinder – Aspekte der Konstruktionsgeschichte von 1930 bis 1990 N2 - Materialsparende Holzkonstruktionen, die insbesondere während der Kriegs- und Nachkriegszeit im 20. Jahrhundert entwickelt und optimiert wurden, erlangen aktuell aus konstruktionshistorischer Sicht, aber auch aus ökonomischer Sicht erneut Interesse. Der vorliegende Beitrag gibt einen Überblick angefangen von den ersten Konstruktionen Ende der 1920er Jahre bis hin zu Typenbindern der DDR, die noch bis 1990 über Landwirtschaftsbauten errichtet wurden und heute oft als Tragkonstruktionen für Photovoltaikanlagen weiterverwendet werden. Der Fokus liegt auf der chronologischen Vorstellung ausgewählter Konstruktionsweisen für Hallen- und Hausdächer unterschieden nach Fachwerk- und Vollwandbindern. Sowohl die verantwortlichen Ingenieure und deren Herkunft, sowie wesentliche Anwendungsfelder und Beispielbauten kommen in der Überblicksdarstellung zur Sprache. Eine wesentliche Erkenntnis ist die im Betrachtungszeitraum 1930 bis 1990 zu verzeichnende Reduzierung einer Vielzahl genagelter Spar- hin zu Typenkonstruktionen, die im wesentlichen äußerst materialeffiziente Fachwerkbinder für Satteldächer hervorbrachte. N2 - Material-saving wooden constructions, which were developed and optimized in particular during the war and post-war period in the 20th century, are currently attracting renewed interest from the point of view of construction history, but also from an economic point of view. The article gives an overview starting with the first constructions at the end of the 1920s up to the type trusses of the GDR, which were built over agricultural buildings until 1990 and are often used today as supporting structures for photovoltaic systems and are therefore experiencing a renaissance. The focus of the article is on the chronological presentation of selected construction methods for hall and house roofs, differentiated between timbered and solid wall trusses. Both the responsible engineers and their origin, as well as essential fields of application and example buildings are discussed in the overview. A significant finding is the reduction in the period from 1930 to 1990 from a large number of nailed savings to type constructions, which essentially produced extremely material-efficient timber trusses for gable roofs. KW - Ingenieurholzbau KW - Nagelverbindung KW - Nagelbrettbinder KW - Kantholzbinder KW - Vollwandbinder KW - Fachwerkbinder KW - Sparkonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48882 N1 - This is the pre-peer reviewed version. ER - TY - THES A1 - Held, Tobias T1 - Einblick: Gestalterische Potentiale und Perspektiven der Videotelefonie im Kontext von Nähe und Distanz. Eine praxis-basierte, (re-)kontextualisierende und diskursanalytische Studie. N2 - Inhaltlich beschäftigt sich die Arbeit, die im Rahmen des Promotionsstudiengangs Kunst und Gestaltung an der Bauhaus-Universität entstand, mit der Erforschung sozio-interaktiver Potentiale der Videotelefonie im Kontext von Nähe und Verbundenheit mit Fokus auf Eigenbild, Embodiment sowie den Rederechtswechsel. Die Videotelefonie als Kommunikationsform hat sich – und darauf deuten die Erfahrungen der Co- vid-19-Pandemie hin – im lebensweltlichen Alltag der Menschen etabliert und wird dort in naher Zukunft nicht mehr wegzudenken sein. Auf Basis ihrer Möglichkeiten und Errungenschaften ist es inzwischen Realität und Lebenswirklichkeit, dass die Kommunikation sowohl im privaten als auch im geschäftlichen Kontext mittels verschiedenster Kanäle stattfindet. Der Videotelefonie kommt hierbei als solche nicht nur eine tragende Funktion, sondern auch eine herausragende Rolle bei der vermeintlichen Reproduktion der Face-to-Face-Kommunikation im digitalen Raum zu und wird wie selbstverständlich zum zwischenmenschlichen Austausch genutzt. Just an diesem Punkt knüpft die Forschungsarbeit an. Zentral stand dabei das Vorhaben einer dezidierte Untersuchung des Forschungsgegenstandes Videotelefonie, sowohl aus Kultur- als auch Technikhistorischer, aber auch Medien-, Wahrnehmungs- wie Kommunikations- theoretischer Perspektive, indem analytische und phänosemiotische Perspektiven miteinander in Beziehung gesetzt werden (z.B. Wahrnehmungsbedingungen, Interaktionsmerkmale, realisierte Kommunikationsprozesse etc.). Damit verbundenes, wünschenswertes Ziel war es, eine möglichst zeitgemäße wie relevante Forschungsfrage zu adressieren, die neben den kulturellen Technisierungs- und Mediatisierungstendenzen in institutionellen und privaten Milieus ebenfalls eine conditio sine qua non der pandemischen (Massen-)Kommunikation entwirft. Die Arbeit ist damit vor allem im Bereich des Produkt- und Interactiondesigns zu verorten. Darüber hinaus hatte sie das Ziel der Darlegung und Begründung der Videotelefonie als eigenständige Kommunikationsform, welche durch eigene, kommunikative Besonderheiten, die sich in ihrer jeweiligen Ingebrauchnahme sowie durch spezielle Wahrnehmungsbedingungen äußern, und die die Videotelefonie als »Rederechtswechselmedium« avant la lettre konsolidieren, gekennzeichnet ist. Dabei sollte der Beweis erbracht werden, dass die Videotelefonie nicht als Schwundstufe einer Kommunikation Face-to-Face, sondern als ein eigenständiges Mediatisierungs- und Kommunikationsereignis zu verstehen sei. Und eben nicht als eine beliebige – sich linear vom Telefon ausgehende – entwickelte Form der audio-visuellen Fernkommunikation darstellt, sondern die gestalterische (Bewegtbild-)Technizität ein eigenständiges Funktionsmaß offeriert, welches wiederum ein innovatives Kommunikationsmilieu im Kontext einer Rederechtswechsel-Medialität stabilisiert. KW - Videotelefonie KW - Designforschung KW - Medienforschung KW - Videokonferenz KW - videochat KW - videocall KW - videoconference Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230111-48867 ER - TY - THES A1 - Pacheco Alvim, Sarah T1 - Falsa Seringueira: Rubber Trees and the Materiality of the Unseen N2 - The theme of this project is the colonial history of the natural rubber industry. It focuses on two species of tropical plants: Ficus elastica and Hevea brasiliensis. Geographically their native habitat is very distant from each other, but they connect by European influence through the exploitation of latex. The many forms and outcomes from this work manifest the attempt of the artist to create an association between a common household plant, the origin of its name, and the source of rubber. As a ghostly connective tissue, the latex surrounds reconstructed history, old prints, live plants, and drawings, accepting the material's capacity to both erase and preserve the past. KW - Kautschuk KW - Gummi KW - Kolonialismus KW - Kunst KW - Geschichte KW - art installation KW - colonialism KW - history KW - natural latex KW - rubber industry Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230105-48467 ER - TY - CHAP A1 - Müller, Matthias A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Sulfatangriff magnesiumhaltiger Wässer auf Mörtel unterschiedlicher Zusammensetzung T2 - Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar N2 - Die besondere Aggressivität von hochkonzentrierten Magnesiumsulfatlösungen bei Einwirkung auf Beton ist seit vielen Jahrzehnten bekannt. Neben dem Sulfat greift zusätzlich auch das Magnesium den Zementstein an. Bei hohen Lösungskonzentrationen nimmt der Magnesiumangriff gegenüber dem Sulfatangriff sogar eine dominante Rolle ein. Magnesiumgehalte unter 300 mg/l im Grundwasser gelten allerdings bislang als nicht angreifend. In Auslagerungs- und Laborversuchen wurde jedoch festgestellt, dass auch bei praxisrelevanten Magnesium- (<300 mg/l) und Sulfatgehalten (1.500 mg/l) das Magnesium zu einer deutlichen Verschärfung des Sulfatangriffes bei niedrigen Temperaturen führte. Diese Verschärfung trat bei Mörteln und Betonen auf, bei denen der erhöhte Sulfatwiderstand durch einen teilweisen Zementersatz mit 20 % Flugasche zu einem CEM II/A-LL erreicht werden sollte, gemäß der Flugascheregelung nach EN 206-1/DIN 1045-2. Bei einem teilweisen Zementersatz durch 30 % Flugasche konnte auch in magnesiumhaltigen Sulfatlösungen eine deutliche Verbesserung des Sulfatwiderstandes erreicht werden. Mörtel mit HS-Zement als Bindemittel wiesen keinerlei Schäden auf. Schadensverursachend war eine Kombination mehrerer Einflüsse. Zum einen wurde der Sulfatwiderstand des Zement-Flugasche-Systems durch die unzureichende Reaktion der Flugasche infolge der niedrigen Lagerungstemperatur geschwächt. Zum anderen konnte durch die Einwirkung des Magnesiums in der Randzone vermutlich eine Destabilisierung der C-S-H-Phasen erfolgen, wodurch die Thaumasitbildung an dieser Stelle forciert wurde. Zusätzlich wurde durch den Portlanditverbrauch und die pH-Wert-Absenkung in der Randzone die puzzolanische Reaktion der Flugasche behindert. KW - Beton KW - Beton KW - Sulfatangriff KW - Flugasche KW - Magnesiumsulfat KW - Thaumasit Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48732 SN - 978-3-00-034075-8 (Bauhaus-Universitätsverlag Weimar) ER - TY - CHAP A1 - Müller, Matthias A1 - Ehrhardt, Dirk A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Optimierung der Nachbehandlung von Waschbetonoberflächen T2 - Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar N2 - Der Nachbehandlung eines Fahrbahndeckenbetons kommt zum Erzielen eines hohen Frost-Tausalz-Widerstandes der fertigen Betondecke eine besondere Bedeutung zu. Bei der Waschbetonbauweise erfolgt die Nachbehandlung in mehreren Schritten. Eine erste Nachbehandlung gewährleistet den Verdunstungsschutz des Betons bis zum Zeitpunkt des Ausbürstens des verzögerten Oberflächenmörtels. Daran schließt sich die zweite Nachbehandlung an, in der Regel durch Aufsprühen eines flüssigen Nachbehandlungsmittels. Der zweite Nachbehandlungsschritt ist entscheidend für den Frost-Tausalz-Widerstand der Betondecke. Im Rahmen eines Forschungsprojektes wurde daher untersucht, inwiefern durch eine Optimierung der zweiten Nachbehandlung der Frost-Tausalz-Widerstand von Waschbetonoberflächen erhöht werden kann, insbesondere bei Verwendung hüttensandhaltiger Zemente. Schon durch eine einmalige Nassnachbehandlung wurde eine deutlich höherer Widerstand der Waschbetons gegen Frost-Tausalz-Angriff erzielt. KW - Beton KW - Straßenbeton KW - Waschbeton KW - Nachbehandlung KW - Frost-Tausalz-Widerstand Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240226-48722 SN - 978-3-00-034075-8 ER - TY - CHAP A1 - Mueller, Matthias A1 - Ludwig, Horst-Michael A1 - Schulte-Schrepping, Christoph A1 - Breitenbücher, Rolf ED - Ludwig, Horst-Michael T1 - Dauerhafte Betonfahrbahndecken durch Verwendung unterschiedlicher Bindemittel in Ober- und Unterbeton T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2 N2 - Gemäß dem Regelwerk für Betonstraßen muss für zweischichtige Betonfahrbahndecken derselbe Zement in Ober- und Unterbeton verwendet werden. Weiterhin ist die Anrechnung von Flugasche auf den w/z-Wert nicht gestattet. Durch eine flexiblere Handhabung der Bindemittel könnten sich Vorteile für die Betonbauweise ergeben. So könnte z.B. der stärker durch Frost beanspruchte Oberbeton mit CEM I hergestellt werden, während Zemente mit höheren Hüttensandgehalten nur im Unterbeton angewendet werden. Im Unterbeton könnten dann Gesteinskörnungen eingesetzt werden, die in einer herkömmlichen CEM I-Rezeptur als AKR-kritisch eingestuft würden. Anhand von AKR-Performance-Prüfungen konnte die hohe Wirksamkeit hüttensandhaltiger Zemente sowie auch von Flugasche auf die AKR-Verminderung aufgezeigt werden. Schon mit einem CEM II/B-S wurden AKR-kritische Rezepturen in den unkritischen Bereich verschoben. Der Frost-Tausalz-Widerstand der Betone wurde bei hohen Gehalten an Hüttensand bzw. Hüttensand + Flugasche verringert, bewegte sich aber in jedem Fall noch im günstigen Bereich. Um eine Beeinträchtigung der baupraktischen Umsetzbarkeit zu vermeiden, sollte sich die Festigkeitsentwicklung von Ober- und Unterbeton im jungen Alter nicht zu stark unterscheiden. Modellberechnungen zur Festlegung einer Mindestfestigkeit für die frühe Belastung sind derzeit noch in Bearbeitung. KW - Beton KW - Betonstraße KW - Zementart KW - Alkali-Kieselsäure-Reaktion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48711 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) ER - TY - CHAP A1 - Müller, Matthias A1 - Ludwig, Horst-Michael A1 - Ben Haha, Mohsen A1 - Zajac, Maciej ED - Ludwig, Horst-Michael T1 - Optimization of multi-component cements containing clinker, slag, V-fly ash, limestone T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2 N2 - The aim of this study was to investigate the optimization of the strength development of quaternary cements with 50 % clinker by a variation of the particle size distribution of the components GGBFS, fly ash and limestone powder. By balancing the overall PSD of the cement by using unprocessed fly ash and coarse limestone powder in combination with a very fine GGBFS, the water demand of the resulting quaternary cements remained unaltered, while the compressive strength of the cements was increased significantly after 7d, 28 and 56d. As can be expected, the quaternary cement with 30 wt.% of the fine slag exhibited a stronger strength increase (about 18 % after 28 d) than the cements with only 20 wt.% slag (about 10% after 28d). KW - Zement KW - Cement KW - Slag KW - Fly ash KW - Limestone powder KW - Particle size distribution Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48700 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) ER - TY - CHAP A1 - Mueller, Matthias A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Neue Modelle für den Frost-Tausalz-Angriff auf Beton T2 - Tagungsbericht, 20. Ibausil - 20. Internationale Baustofftagung, 12. - 14. September 2018, Weimar, Teil 1 N2 - Für den Frost-Tausalz-Angriff auf Beton existiert eine Reihe von Schadenstheorien. Drei aktuelle Theorien nehmen für sich in Anspruch, den Schadensmechanismus und insbesondere den Einfluss niedrig konzentrierter Tausalzlösungen auf den Schädigungsgrad gut abbilden zu können. Die Glue Spall-Theorie sowie die Cryogenic Suction-Theorie bieten plausible Ansätze. In Untersuchungen konnten einige Modellvorstellungen bestätigt werden, insbesondere der Prozess des kryogenen Saugens. Ob dieser Vorgang oder die mechanische Glue Spall-Belastung tatsächlich schadensauslösend sind, kann anhand der Untersuchungen jedoch noch nicht zweifelsfrei bestätigt oder ausgeschlossen werden. Die Brine Rejection-Theorie zeigt wichtige Prozesse auf, die für die Schädigung bei einem Frost-Tausalz-Angriff relevant sein können. Als alleinstehendes Modell ist es eher nicht geeignet. KW - Beton KW - Beton KW - Frost-Tausalz-Angriff Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48691 SN - 978-3-00-059950-7 (Bauhaus-Universitätsverlag Weimar) ER - TY - JFULL A1 - Bogner, Simone A1 - Karpf, Michael A1 - Willer, Stefan A1 - Aquilar, Giorgia A1 - Springer, Jörg A1 - Euler-Rolle, Bernd A1 - Sikiaridi, Elizabeth A1 - Vogelaar, Frans A1 - von Beckerath, Verena A1 - Klei, Alexandra A1 - Raheem, Oluwafunminiyi A1 - Grundig, Ronny A1 - Sezer, Özge A1 - Kutkina, Anna A1 - Manka, Inge A1 - Hettchen, Karolina A1 - Jüttner, Monique A1 - Blunk, Julian ED - Bogner, Simone ED - Karpf, Michael ED - Meier, Hans-Rudolf T1 - Praktiken des Erbens. Metaphern, Materialisierungen, Machtkonstellationen N2 - Ausgehend von der Bemerkung des Philosophen Jacques Derrida, dass Erbe immer auch eine Aufgabe sei, widmet sich der dritte Band der Schriftenreihe des Graduiertenkollegs „Identität und Erbe“ den sozialen und kulturellen Praktiken der Bezugnahme auf Vergangenheit(en) und Identität(en). Mit einem (kulturellen) Erbe soll und muss etwas getan werden, um es überhaupt hervorzubringen. Es konstituiert sich erst im Akt des (Nicht-)Erbens, das heißt im Wechselverhältnis mit den mit und an ihm ausgeführten Praktiken. Gleichwohl ermöglicht erst deren Verbindung mit den materiellen Überresten und Überlieferungen des Erbes eine Aneignung oder Ablehnung der Vergangenheit sowie die Fort- und Umschreibung eines bereits bestehenden Erbes. Diese Vorgänge sind nicht willkürlicher Natur: Die Möglichkeiten zur Interpretation und Deutung werden durch die sozialen, politischen, kulturellen, ökonomischen und technischen Bedingungen der Gegenwart sowie durch die Geschichte und Materialität des Erbes beschränkt, erweitert und gelenkt. Erbe und Erbeprozesse müssen deshalb notwendigerweise miteinander in Beziehung gesetzt werden. Mit Beiträgen von Simone Bogner und Michael Karpf, Stefan Willer, Giorgia Aquilar, Jörg Springer, Bernd Euler-Rolle, Elizabeth Sikiaridi und Frans Vogelaar, Verena von Beckerath, Alexandra Klei, Oluwafunminiyi Raheem, Ronny Grundig, Özge Sezer, Anna Kutkina, Inge Manka, Karolina Hettchen und Monique Jüttner sowie Julian Blunk. T3 - Schriftenreihe des DFG-Graduiertenkollegs 2227 "Identität und Erbe" - 3 KW - Kulturerbe KW - Denkmalpflege KW - Architektur Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220810-47025 PB - Bauhaus-Universitätsverlag CY - Weinstraße-Ilmtal ER - TY - THES A1 - Müller, Matthias T1 - Salt-frost Attack on Concrete - New Findings regarding the Damage Mechanism N2 - The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept. To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory. The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown. The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste. Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally. As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content. T2 - Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus KW - Beton KW - Frost KW - Concrete KW - Salt frost attack KW - Damage mechanism KW - Glue Spall KW - Cryogenic Suction Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230103-48681 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4502 N1 - Englische Fassung meiner deutschsprachigen Dissertation mit dem Titel "Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus". ER - TY - JFULL A1 - Bogner, Simone A1 - Gourinovitch, Oxana A1 - Ba, Claudia A1 - Kibel, Jochen A1 - Stapel, Gülşah A1 - Krajewsky, Georg A1 - Frölich-Kulik, Maria A1 - Masoud, Zoya A1 - Wächter, Konstantin A1 - Häger, Benjamin A1 - Höhne, Wolfram A1 - Alberti, Sarah A1 - Trötschel-Daniels, Bianka A1 - Helas, Luise A1 - Selitz, Lisa Marie A1 - Torreiter, Laura ED - Bogner, Simone ED - Dolff-Bonekämper, Gabi ED - Meier, Hans-Rudolf T1 - Instabile Konstruktionen. Interdisziplinäre Forschungen zu »Identität und Erbe« N2 - Wer von Erbe im Zusammenhang mit Identität spricht, verspricht sich und Anderen »Kontinuität« und »Stabilität«. Das Versprechen hält indes nur so lange, wie sich Menschen auf die damit verbundenen Erzählungen einlassen. Da diese zunehmend hinterfragt werden und der Begriff »Identität« im politischen Raum zu einer umkämpften Kategorie avanciert ist, werden auch die lange gehegten, gewohnten »Konstruktionen« instabil. Dies zeigt sich insbesondere in Momenten des Konflikts, der übergriffigen Inanspruchnahme und des Verlusts. Der Titel »Instabile Konstruktionen« verweist zugleich auf die beiden Kernbereiche des Kollegs: einerseits auf Architektur und Denkmalpflege, in denen der Begriff Konstruktion sich auf bauliche Manifestationen bezieht, von denen eine gewisse Haltbarkeit und Dauerhaftigkeit erwartet wird und andererseits auf die Kultur- und Sozialwissenschaften, wo Konstruktion die soziale Herstellung symbolischer Sinnwelten meint. Ins Zentrum rückt so der Anspruch, die materielle Umwelt im Wechselverhältnis zu ihrer sozialen Gemachtheit zu verstehen. T3 - Schriftenreihe des DFG-Graduiertenkollegs 2227 "Identität und Erbe" - 2 KW - Identität KW - Erbe KW - Instabilität KW - Denkmalpflege KW - Architektur KW - Denkmalpflege, Architektur, Kunst , Kunstgeschichte , Geschichte , Tradition , Stabilität , Dekonstruktion, Identität, Erbe Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220315-46066 PB - Bauhaus-Universitätsverlag CY - Ilmtal-Weinstraße ER -