TY - THES A1 - Kurukuri, Srihari T1 - Homogenization of Damaged Concrete Mesostructures using Representative Volume Elements - Implementation and Application to SLang N2 - This master thesis explores an important and under-researched topic on the so-called bridging of length scales (from >meso< to >macro<), with the concept of homogenization in which the careful characterization of mechanical response requires that the developed material model >bridge< the representations of events that occur at two different scales. The underlying objective here is to efficiently incorporate material length scales in the classical continuum plasticity/damage theories through the concept of homogenization theory. The present thesis is devoted to computational modeling of heterogeneous materials, primarily to matrix-inclusion type of materials. Considerations are focused predominantly on the elastic and damage behavior as a response to quasistatic mechanical loading. Mainly this thesis focuses to elaborate a sound numerical homogenization model which accounts for the prediction of overall properties with the application of different types of boundary conditions namely: periodic, homogeneous and mixed type of boundary conditions over two-dimensional periodic and non-periodic RVEs and three-dimensional non-periodic RVEs. Identification of the governing mechanisms and assessing their effect on the material behavior leads one step further. Bringing together this knowledge with service requirements allows for functional oriented materials design. First, this thesis gives attention on providing the theoretical basic mechanisms involved in homogenization techniques and a survey will be made on existing analytical methods available in literature. Second, the proposed frameworks are implemented in the well known finite element software programs ANSYS and SLang. Simple and efficient algorithms in FORTRAN are developed for automated microstructure generation using RSA algorithm in order to perform a systematic numerical testing of microstructures of composites. Algorithms are developed to generate constraint equations in periodic boundary conditions and different displacements applied spatially over the boundaries of the RVE in homogeneous boundary conditions. Finally, nonlinear simulations are performed at mesolevel, by considering continuum scalar damage behavior of matrix material with the linear elastic behavior of aggregates with the assumption of rigid bond between constituents. KW - Schadensmechanik KW - Finite-Elemente-Methode KW - Beton KW - Homogenisierung KW - Repräsentative Volumen Elemente KW - Mesoskala KW - Homogenization KW - Representative Volume Elements KW - Mesoscale Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6670 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Ullrich, Carmen T1 - Dynamische Analyse der Sprottetalbrücke N2 - Die vorliegende Arbeit beschäftigt sich mit der dynamischen Analyse der Sprottetalbrücke infolge aufgetretener Asphaltschäden. Sie beinhaltet die Erstellung eines FE-Modells, der Darstellung der theoretischen Grundlagen der Dynamik sowie die Auswertung von berechneten Eigenformen und Asphaltspannungen unter Berücksichtigung der derzeit gültigen Normen. N2 - The diploma thesis contains the dynamic analysis of the roadwaybridge >Sprottetalbrücke< with modelling a FE-structure, presents the principle basics of the dynamic and interprets the results in consider of the presently available regulations in germany. KW - Finite-Elemente-Methode KW - Dynamik KW - Brückenbau KW - Dynamische Analyse KW - Modale Analyse KW - Straßenbrücken KW - Sprottetal KW - Sprottetalbrücke KW - Tragrostbrücke KW - Überfahrt KW - Slang KW - Asphalt KW - Lastwechselzahl Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7268 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Gundermann, Ralf T1 - 3D-Simulation des Temperaturfeldes und der Gefügeumwandlung bei einer Laserstrahlschweißung T1 - 3D-simulation the temperature field and the material transformation at a laser beam welding N2 - Das FEM-Programmsystem „SYSWELD“ kommt für die Berechnung des Temperaturfeldes bei einer Laserstrahlschweißung zum Einsatz. Insbesondere sollen der Einfluss des Energieeintrages und die damit verbundene Gefügeumwandlung eines Feinkornbaustahles untersucht und Aussagen zur notwendigen Modellierungsgenauigkeit der Nahtgeometrie bzw. Netzverfeinerung getroffen werden. Im Einzelnen sind folgende Teilaufgaben zu lösen: - ausführliche Literaturrecherche zur numerischen Analyse von Schweißverbindungen insbesondere zu temperaturabhängigen Materialeigenschaften von Feinkornbaustählen, - Darstellung der Wärmequelle für das Laserstrahlschweißen, - Erprobung unterschiedlicher Netzvarianten für die FE-Analyse von instationären Temperaturfeldern, - Untersuchung zur Modellierungsgenauigkeit der Nahtgeometrie, - Parameterstudien zum Einfluss der Materialkennwerte und Gefügekinetik auf das Temperaturfeld sowie das Gefüge. N2 - The FEM-program "SYSWELD" comes for the calculation the temperature field at a laser beam welding to the employment. Particularly the influence of the energy deposit should explored and the with it joined material transformation of a fine grained steel and are met statements to the necessary modelling precision the weld geometry and mesh refinement. In the single following tasks are to be solved: - Comprehensive literature investigation to the numerical analysis of welding joints particularly to temperature dependent material properties of fine grained steels, - Display the heat source for the laser beam welding, - Test different mesh variants for the Fe-analysis of non-stationary temperature fields, - Investigation to the modelling precision on the weld geometry, - Investigation to the influence the material properties and material transformation on the temperature field as well as the material structure. KW - Laserschweißen KW - Finite-Elemente-Methode KW - Direkte numerische Simulation KW - Gefügeumwandlung KW - Feinkornbaustahl KW - Temperaturfeld KW - Laserstrahlschweißen KW - Aufheizraten KW - ZTU-Schaubild KW - laser beam KW - joint weld KW - fine grained steel Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6680 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER -