TY - JOUR A1 - Sierek, Karl T1 - "Architektur in Bewegung" : zur Enträumlichung urbaner Orte durch Medien- und Lichtfassaden N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/13 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080729-13846 ER - TY - JOUR A1 - Wirth, Hermann T1 - "Auch Schandmale sind denkmalwert" : zum Umgang mit baulich-räumlichen Sachzeugen technischer und technologischer Fehlorientierung N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/383-385 KW - Architektur KW - Technologie KW - Denkmal KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11866 ER - TY - JOUR A1 - Schulze, Ingrid T1 - "Burg" und Bauhaus : zum Schaffen von Paul Thiersch, Erwin Hahs und Gustav Weidanz N2 - Wissenschaftliches Kolloquium vom 5. bis 7. Juli 1983 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Das Bauhauserbe und die gegenwärtige Entwicklung der Architektur : zum 100. Geburtstag von Walter Gropius' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 29.1983,5-6/505-510 KW - Thiersch KW - Paul KW - Hahs KW - Erwin KW - Weidanz KW - Gustav KW - Bauhaus-Kolloquium KW - Weimar KW - 1983 Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9397 ER - TY - JOUR A1 - Schwarz, Ullrich T1 - "Das echt-absolut Reelle" (Novalis) : Überlegungen zu einer reflexiven ästhetischen Moderne N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/09 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080729-13805 ER - TY - JOUR A1 - Simon-Ritz, Frank T1 - "Kultur ist Reichtum an Problemen": Wie sich der Kultur-Begriff der UNESCO an Egon Friedell annäherte JF - Palmbaum: Literarisches Journal aus Thüringen N2 - Der in H. 1/2023 erschienene Essay führt Gedanken einer in H. 1/2022 des "Palmbaum" erschienene Betrachtung (https://doi.org/10.25643/bauhaus-universitaet.4628) weiter. Im Zentrum stehen dabei die Bemühungen der UNESCO um das immaterielle Kulturerbe. KW - UNESCO KW - Kulturerbe Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230411-49524 VL - 2023 IS - Heft 1 PB - Quartus Verlag CY - Bucha bei Jena ER - TY - JOUR A1 - Köb, Roland A1 - Pollak, Sabine T1 - "LUSTration" - operative Instrumente gegen den Mythos Fortschritt N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/285-288 KW - Architektur KW - Technologie KW - Fortschritt KW - Fiktion KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11898 ER - TY - JOUR A1 - Brake, Klaus T1 - "Neue Technologien" - Auswirkungen im Bereich Arbeit, Sozialstruktur und Umwelt in ihren Einflüssen auf die Territorialstruktur N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/69-72 KW - Regionalstruktur KW - Technik KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10611 ER - TY - JOUR A1 - Baltzer, Nanni T1 - "No dobbiamo creare (...) un'arte dei nostri tempi, un'arte fascista" (Mussolini) : Fotografie und Architektur im Faschismus N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/174-186 KW - Faschismus KW - Architektur KW - Photographie KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13320 ER - TY - JOUR A1 - Pratschke, Margarete T1 - "Overlapping Windows" : Architektonische Raumkonzepte als Vorbilder des digitalen Bildraums grafischer Benutzeroberflächen N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/29 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-14025 ER - TY - JOUR A1 - Weckherlin, Gernot T1 - "This book is not literature - it is a practical manual ..." : diskursive und nicht-diskursive Praktiken in der Architektur N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/46-58 KW - Architekturtheorie KW - Diskurs KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13397 ER - TY - JOUR A1 - Wirth, Hermann T1 - "Wie das Regime, so seine Bauten" : die Koinzidenz von Machtstruktur und Baustruktur N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 39.1993,1-2/119-121 KW - Architektur KW - Macht KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11415 ER - TY - JOUR A1 - Hartmann, Frank T1 - 'Unter die Haut der Welt'. Philosophical Toys, Metatechnik und transanthropologischer Raum JF - Zeitschrift für Medien- und Kulturforschung N2 - Nach dem aufgeregten Palaver um den Computer als 'Medium' und die akademische Begleitrhetorik zum Internet wird erneut die Frage nach der Leistung von Medienphilosophie gestellt - in diesem Beitrag als medienanthropologische Vergewisserung: welche technischen Überschreitungen definieren das Neue unserer Lage? KW - Philosophie KW - Technikphilosophie KW - Medienphilosophie Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140819-22781 IS - 2010,2 SP - 95 EP - 110 ER - TY - JOUR A1 - Siegert, Bernhard T1 - (Nicht) Am Ort : zum Raster als Kulturtechnik N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' KW - Architektur KW - Stadt KW - Raster KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080227-13049 ER - TY - JOUR A1 - Krebs, F. A1 - Brück, E. T1 - 3D-Computergrafik und -animation als Instrument der Visualisierung im Bereich Entwurf und Denkmalpflege N2 - Seit mehreren Jahren wird im Fachbereich Gestaltung, Studiengang Innenarchitektur 3D-Computergrafik und -animation in Lehrveranstaltungen ausgebildet und in Projekt- und Diplomarbeiten als Darstellungsmedium angewandt. Eine besondere Herausforderung stellen dabei die 3D-Visualisierungen von historischen Gebäuden dar. Mit den beiden nachfolgenden Beispielen soll der Einsatz und die curricularen Verknüpfung der CA-Technologie mit Studienarbeiten und Projekten zum Thema >Denkmalpflege< aufgezeigt werden. Rekonstruktion und Visualisierung des ehemaligen >Jagdschlosses Platte< bei Wiesbaden. Mit Unterstützung einer Kunsthistorikerin wurde in einer Studienarbeit das im Krieg zerstörte ehemalige Jagdschloß im Computer nachgebildet. Neben der Darstellung des Gebäudeäußeren und des zentralen Innenbereiches wurde eine Animation über die Triangulierung der klassizistischen Geometrie erstellt. Umnutzung historischer Bausubstanz am Beispiel der ehemaligen Klostersanlage >Schiffenberg< bei Gießen. Im Rahmen einer Projektarbeit wurden mehrer Konzepte entwickelt, Entwürfe erstellt und mittels Computeranimationen öffentlich präsentiert. In Kooperation mit dem Studiengang Fernsehtechnik (FH-Wiesbaden) wurde von zwei Studenten eine Videodokumentation über den gesamten Projektverlauf erstellt. Neben dem Aufzeigen der Arbeitsprozesse und dem Vorstellen des Lehrkonzeptes für die curriculare Einbindung der CA-Technologie werden aktuelle Studienergebnisse anhand von Videoprojektionen vorgestellt. KW - Architektur KW - Visualisierung KW - Dreidimensionales Modell KW - Computergraphik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5235 ER - TY - JOUR A1 - Grönwald, Bernd T1 - 40 Jahre Städtebau- und Architekturentwicklung in der DDR N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/17-20 KW - Deutschland KW - Städtebau KW - Architektur KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10960 ER - TY - JOUR A1 - Artus, Mathias A1 - Alabassy, Mohamed Said Helmy A1 - Koch, Christian T1 - A BIM Based Framework for Damage Segmentation, Modeling, and Visualization Using IFC JF - Applied Sciences N2 - Paper-based data acquisition and manual transfer between incompatible software or data formats during inspections of bridges, as done currently, are time-consuming, error-prone, cumbersome, and lead to information loss. A fully digitized workflow using open data formats would reduce data loss, efforts, and the costs of future inspections. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information among different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focuses on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing. KW - Building Information Modeling KW - Brücke KW - Inspektion KW - Maschinelles Lernen KW - Bildverarbeitung KW - Building Information Modeling KW - Bridge KW - Inspection KW - Damage Segmentation KW - Machine Learning KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220314-46059 UR - https://www.mdpi.com/2076-3417/12/6/2772 VL - 2022 IS - volume 12, issue 6, article 2772 SP - 1 EP - 24 PB - MDPI CY - Basel ER - TY - JOUR A1 - Noh, Jung-Hwi A1 - Park, Jong-Heon T1 - A Calculation of Initial Cable Force for Ko-Ha Grand Bridge N2 - The primary objective of initial shape analysis of a cable stayed bridge is to calculate initial installation cable tension forces and to evaluate fabrication camber of main span and pylon providing the final longitudinal profile of the bridge at the end of construction. In addition, the initial cable forces depending on the alternation of the bridge’s shape can be obtained from the analysis, and will be used to provide construction safety during construction. In this research, we conducted numerical experiments for initial shape of Ko-ha bridge, which will be constructed in the near future, using three different typical methods such as continuous beam method, linear truss method, and IIMF (Introducing Initial Member Force) method KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Hängebrücke KW - cable stayed bridge KW - cable force KW - initial shape KW - initial equilibrium state Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2459 ER - TY - JOUR A1 - Kavrakov, Igor A1 - Legatiuk, Dmitrii A1 - Gürlebeck, Klaus A1 - Morgenthal, Guido T1 - A categorical perspective towards aerodynamic models for aeroelastic analyses of bridge decks JF - Royal Society Open Science N2 - Reliable modelling in structural engineering is crucial for the serviceability and safety of structures. A huge variety of aerodynamic models for aeroelastic analyses of bridges poses natural questions on their complexity and thus, quality. Moreover, a direct comparison of aerodynamic models is typically either not possible or senseless, as the models can be based on very different physical assumptions. Therefore, to address the question of principal comparability and complexity of models, a more abstract approach, accounting for the effect of basic physical assumptions, is necessary. This paper presents an application of a recently introduced category theory-based modelling approach to a diverse set of models from bridge aerodynamics. Initially, the categorical approach is extended to allow an adequate description of aerodynamic models. Complexity of the selected aerodynamic models is evaluated, based on which model comparability is established. Finally, the utility of the approach for model comparison and characterisation is demonstrated on an illustrative example from bridge aeroelasticity. The outcome of this study is intended to serve as an alternative framework for model comparison and impact future model assessment studies of mathematical models for engineering applications. KW - Brücke KW - Aerodynamik KW - Aeroelastizität KW - bridge KW - abstract modelling KW - category theory KW - bridge aerodynamics KW - bridge aeroelasticity KW - aerodynamic models KW - model complexity KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190314-38656 UR - https://royalsocietypublishing.org/doi/10.1098/rsos.181848 IS - Volume 6, Issue 3 ER - TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Nguyen, Hiep Vinh A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Duflot, Marc T1 - A cell-based smoothed finite element method for three dimensional solid structures JF - KSCE Journal of Civil Engineering N2 - This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s12205-012-1515-7 SP - 1230 EP - 1242 ER - TY - JOUR A1 - Vaarmann, Otu T1 - A class of rapidly convergent interative Methods for Problems in mathematical Modelling N2 - Methods with the convergence order p 2 (Newton`s, tangent hyperbolas, tangent parabolas etc.) and their approximate variants are studied. Conditions are presented under which the approximate variants preserve their convergence rate intrinsic to these methods and some computational aspects (possibilities to organize parallel computation, globalization of a method, the solution of the linear equations versus the matrix inversion at every iteration etc.) are discussed. Polyalgorithmic computational schemes (hybrid methods) combining the best features of various methods are developed and possibilities of their application to numerical solution of two-point boundary-value problem in ordinary differential equations and decomposition-coordination problem in convex programming are analyzed. KW - Mathematisches Modell KW - Dialogsystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5223 ER - TY - JOUR A1 - Abbaspour-Gilandeh, Yousef A1 - Molaee, Amir A1 - Sabzi, Sajad A1 - Nabipour, Narjes A1 - Shamshirband, Shahaboddin A1 - Mosavi, Amir T1 - A Combined Method of Image Processing and Artificial Neural Network for the Identification of 13 Iranian Rice Cultivars JF - agronomy N2 - Due to the importance of identifying crop cultivars, the advancement of accurate assessment of cultivars is considered essential. The existing methods for identifying rice cultivars are mainly time-consuming, costly, and destructive. Therefore, the development of novel methods is highly beneficial. The aim of the present research is to classify common rice cultivars in Iran based on color, morphologic, and texture properties using artificial intelligence (AI) methods. In doing so, digital images of 13 rice cultivars in Iran in three forms of paddy, brown, and white are analyzed through pre-processing and segmentation of using MATLAB. Ninety-two specificities, including 60 color, 14 morphologic, and 18 texture properties, were identified for each rice cultivar. In the next step, the normal distribution of data was evaluated, and the possibility of observing a significant difference between all specificities of cultivars was studied using variance analysis. In addition, the least significant difference (LSD) test was performed to obtain a more accurate comparison between cultivars. To reduce data dimensions and focus on the most effective components, principal component analysis (PCA) was employed. Accordingly, the accuracy of rice cultivar separations was calculated for paddy, brown rice, and white rice using discriminant analysis (DA), which was 89.2%, 87.7%, and 83.1%, respectively. To identify and classify the desired cultivars, a multilayered perceptron neural network was implemented based on the most effective components. The results showed 100% accuracy of the network in identifying and classifying all mentioned rice cultivars. Hence, it is concluded that the integrated method of image processing and pattern recognition methods, such as statistical classification and artificial neural networks, can be used for identifying and classification of rice cultivars. KW - Maschinelles Lernen KW - Machine learning KW - food informatics KW - big data KW - artificial neural networks KW - artificial intelligence KW - image processing KW - rice Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200123-40695 UR - https://www.mdpi.com/2073-4395/10/1/117 VL - 2020 IS - Volume 10, Issue 1, 117 PB - MDPI ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Isik, Ercan T1 - A Comparative Probabilistic Seismic Hazard Analysis for Eastern Turkey (Bitlis) Based on Updated Hazard Map and Its Effect on Regular RC Structures JF - Buildings N2 - Determining the earthquake hazard of any settlement is one of the primary studies for reducing earthquake damage. Therefore, earthquake hazard maps used for this purpose must be renewed over time. Turkey Earthquake Hazard Map has been used instead of Turkey Earthquake Zones Map since 2019. A probabilistic seismic hazard was performed by using these last two maps and different attenuation relationships for Bitlis Province (Eastern Turkey) were located in the Lake Van Basin, which has a high seismic risk. The earthquake parameters were determined by considering all districts and neighborhoods in the province. Probabilistic seismic hazard analyses were carried out for these settlements using seismic sources and four different attenuation relationships. The obtained values are compared with the design spectrum stated in the last two earthquake maps. Significant differences exist between the design spectrum obtained according to the different exceedance probabilities. In this study, adaptive pushover analyses of sample-reinforced concrete buildings were performed using the design ground motion level. Structural analyses were carried out using three different design spectra, as given in the last two seismic design codes and the mean spectrum obtained from attenuation relationships. Different design spectra significantly change the target displacements predicted for the performance levels of the buildings. KW - Erbeben KW - Schwellenwert KW - Seismic risk KW - Adaptive Pushover KW - Design Spectra KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221028-47283 UR - https://www.mdpi.com/2075-5309/12/10/1573 VL - 2022 IS - Volume 12, issue 10, article 1573 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Jadhav, Kirti A1 - Mohammad, Kifaytullah A1 - Aghakouchaki Hosseini, Seyed Ehsan A1 - Lahmer, Tom T1 - A Comparative Study of MCDM Methods Integrated with Rapid Visual Seismic Vulnerability Assessment of Existing RC Structures JF - Applied Sciences N2 - Recently, the demand for residence and usage of urban infrastructure has been increased, thereby resulting in the elevation of risk levels of human lives over natural calamities. The occupancy demand has rapidly increased the construction rate, whereas the inadequate design of structures prone to more vulnerability. Buildings constructed before the development of seismic codes have an additional susceptibility to earthquake vibrations. The structural collapse causes an economic loss as well as setbacks for human lives. An application of different theoretical methods to analyze the structural behavior is expensive and time-consuming. Therefore, introducing a rapid vulnerability assessment method to check structural performances is necessary for future developments. The process, as mentioned earlier, is known as Rapid Visual Screening (RVS). This technique has been generated to identify, inventory, and screen structures that are potentially hazardous. Sometimes, poor construction quality does not provide some of the required parameters; in this case, the RVS process turns into a tedious scenario. Hence, to tackle such a situation, multiple-criteria decision-making (MCDM) methods for the seismic vulnerability assessment opens a new gateway. The different parameters required by RVS can be taken in MCDM. MCDM evaluates multiple conflicting criteria in decision making in several fields. This paper has aimed to bridge the gap between RVS and MCDM. Furthermore, to define the correlation between these techniques, implementation of the methodologies from Indian, Turkish, and Federal Emergency Management Agency (FEMA) codes has been done. The effects of seismic vulnerability of structures have been observed and compared. KW - Erdbebensicherheit KW - damaged buildings KW - earthquake safety assessment KW - soft computing techniques KW - rapid visual screening KW - seismic risk estimation KW - Multi-criteria decision making KW - vulnerability assessment KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200918-42360 UR - https://www.mdpi.com/2076-3417/10/18/6411/htm VL - 2020 IS - Volume 10, issue 18, article 6411 PB - MDPI CY - Basel ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Wang, L. A1 - Jiang, Jin-Wu A1 - Wang, Z. A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - A comparative study of two molecular mechanics models based on harmonic potentials JF - Journal of Applied Physics N2 - A comparative study of two molecular mechanics models based on harmonic potentials KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Bucher, Christian A1 - Most, Thomas T1 - A comparison of approximate response functions in structural reliability analysis JF - Probabilistic Engineering Mechanics N2 - A comparison of approximate response functions in structural reliability analysis KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 SP - 154 EP - 163 ER - TY - JOUR A1 - Talebi, Hossein A1 - Silani, Mohammad A1 - Bordas, Stéphane Pierre Alain A1 - Kerfriden, Pierre A1 - Rabczuk, Timon T1 - A computational library for multiscale modeling of material failure JF - Computational Mechanics N2 - A computational library for multiscale modeling of material failure KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Beer, Daniel G. A1 - Firmenich, Berthold A1 - Richter, Torsten T1 - A Concept for CAD Systems with Persistent Versioned Data Models N2 - The synchronous distributed processing of common source code in the software development process is supported by well proven methods. The planning process has similarities with the software development process. However, there are no consistent and similarly successful methods for applications in construction projects. A new approach is proposed in this contribution. KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Versionsverwaltung KW - CAD Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2046 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Liang, Chao A1 - Rabczuk, Timon T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared. KW - Energiespeicherung KW - Druckluft KW - Kaverne KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31726 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Rabczuk, Timon A1 - Liang, C. T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Alalade, Muyiwa A1 - Reichert, Ina A1 - Köhn, Daniel A1 - Wuttke, Frank A1 - Lahmer, Tom ED - Qu, Chunxu ED - Gao, Chunxu ED - Zhang, Rui ED - Jia, Ziguang ED - Li, Jiaxiang T1 - A Cyclic Multi-Stage Implementation of the Full-Waveform Inversion for the Identification of Anomalies in Dams JF - Infrastructures N2 - For the safe and efficient operation of dams, frequent monitoring and maintenance are required. These are usually expensive, time consuming, and cumbersome. To alleviate these issues, we propose applying a wave-based scheme for the location and quantification of damages in dams. To obtain high-resolution “interpretable” images of the damaged regions, we drew inspiration from non-linear full-multigrid methods for inverse problems and applied a new cyclic multi-stage full-waveform inversion (FWI) scheme. Our approach is less susceptible to the stability issues faced by the standard FWI scheme when dealing with ill-posed problems. In this paper, we first selected an optimal acquisition setup and then applied synthetic data to demonstrate the capability of our approach in identifying a series of anomalies in dams by a mixture of reflection and transmission tomography. The results had sufficient robustness, showing the prospects of application in the field of non-destructive testing of dams. KW - Damm KW - Defekt KW - inverse analysis KW - damage identification KW - full-waveform inversion KW - dams KW - wave propagation KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221201-48396 UR - https://www.mdpi.com/2412-3811/7/12/161 VL - 2022 IS - Volume 7, issue 12, article 161 PB - MDPI CY - Basel ER - TY - JOUR A1 - Zhang, Chao A1 - Wang, Cuixia A1 - Lahmer, Tom A1 - He, Pengfei A1 - Rabczuk, Timon T1 - A dynamic XFEM formulation for crack identification JF - International Journal of Mechanics and Materials in Design N2 - A dynamic XFEM formulation for crack identification KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 427 EP - 448 ER - TY - JOUR A1 - Ma, Zhiliang A1 - Qin, Liang T1 - A Framework of Management Information System for Construction Projects N2 - A comprehensive framework of information management system for construction projects in China has been established through extensive literature survey and field investigation. It utilizes the potential information technologies and covers the practical management patterns as well as the major aspects of construction project management. It can be used to guide and evaluate the design of the information management systems for construction projects in order to make the system to be applicable to a wide variety of construction projects and survive the changes in project management. KW - Mehragentensystem KW - Lernendes System KW - Managementinformationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2126 ER - TY - JOUR A1 - Völske, Michael A1 - Gollub, Tim A1 - Hagen, Matthias A1 - Stein, Benno T1 - A keyquery-based classification system for CORE JF - D-Lib Magazine N2 - We apply keyquery-based taxonomy composition to compute a classification system for the CORE dataset, a shared crawl of about 850,000 scientific papers. Keyquery-based taxonomy composition can be understood as a two-phase hierarchical document clustering technique that utilizes search queries as cluster labels: In a first phase, the document collection is indexed by a reference search engine, and the documents are tagged with the search queries they are relevant—for their so-called keyqueries. In a second phase, a hierarchical clustering is formed from the keyqueries within an iterative process. We use the explicit topic model ESA as document retrieval model in order to index the CORE dataset in the reference search engine. Under the ESA retrieval model, documents are represented as vectors of similarities to Wikipedia articles; a methodology proven to be advantageous for text categorization tasks. Our paper presents the generated taxonomy and reports on quantitative properties such as document coverage and processing requirements. KW - Massendaten KW - Taxonomie KW - Dynamic Taxonomy Composition, Keyquery, Classification Systems, Reverted Index, Big Data Problem Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31662 ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Kumari, Vandana A1 - Jadhav, Kirti A1 - Raj Das, Rohan A1 - Rasulzade, Shahla A1 - Lahmer, Tom T1 - A Machine Learning Framework for Assessing Seismic Hazard Safety of Reinforced Concrete Buildings JF - Applied Sciences N2 - Although averting a seismic disturbance and its physical, social, and economic disruption is practically impossible, using the advancements in computational science and numerical modeling shall equip humanity to predict its severity, understand the outcomes, and equip for post-disaster management. Many buildings exist amidst the developed metropolitan areas, which are senile and still in service. These buildings were also designed before establishing national seismic codes or without the introduction of construction regulations. In that case, risk reduction is significant for developing alternatives and designing suitable models to enhance the existing structure’s performance. Such models will be able to classify risks and casualties related to possible earthquakes through emergency preparation. Thus, it is crucial to recognize structures that are susceptible to earthquake vibrations and need to be prioritized for retrofitting. However, each building’s behavior under seismic actions cannot be studied through performing structural analysis, as it might be unrealistic because of the rigorous computations, long period, and substantial expenditure. Therefore, it calls for a simple, reliable, and accurate process known as Rapid Visual Screening (RVS), which serves as a primary screening platform, including an optimum number of seismic parameters and predetermined performance damage conditions for structures. In this study, the damage classification technique was studied, and the efficacy of the Machine Learning (ML) method in damage prediction via a Support Vector Machine (SVM) model was explored. The ML model is trained and tested separately on damage data from four different earthquakes, namely Ecuador, Haiti, Nepal, and South Korea. Each dataset consists of varying numbers of input data and eight performance modifiers. Based on the study and the results, the ML model using SVM classifies the given input data into the belonging classes and accomplishes the performance on hazard safety evaluation of buildings. KW - Erdbeben KW - Vulnerability KW - Earthquake KW - damaged buildings KW - earthquake safety assessment KW - soft computing techniques KW - rapid visual screening KW - Machine Learning KW - vulnerability assessment KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201022-42744 UR - https://www.mdpi.com/2076-3417/10/20/7153 VL - 2020 IS - Volume 10, issue 20, article 7153 PB - MDPI CY - Basel ER - TY - JOUR A1 - Yang, Shih-Wei A1 - Budarapu, Pattabhi Ramaiah A1 - Mahapatra, D.R. A1 - Bordas, Stéphane Pierre Alain A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - A Meshless Adaptive Multiscale Method for Fracture JF - Computational Materials Science N2 - A Meshless Adaptive Multiscale Method for Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 382 EP - 395 ER - TY - JOUR A1 - Karimimoshaver, Mehrdad A1 - Hajivaliei, Hatameh A1 - Shokri, Manouchehr A1 - Khalesro, Shakila A1 - Aram, Farshid A1 - Shamshirband, Shahaboddin T1 - A Model for Locating Tall Buildings through a Visual Analysis Approach JF - Applied Sciences N2 - Tall buildings have become an integral part of cities despite all their pros and cons. Some current tall buildings have several problems because of their unsuitable location; the problems include increasing density, imposing traffic on urban thoroughfares, blocking view corridors, etc. Some of these buildings have destroyed desirable views of the city. In this research, different criteria have been chosen, such as environment, access, social-economic, land-use, and physical context. These criteria and sub-criteria are prioritized and weighted by the analytic network process (ANP) based on experts’ opinions, using Super Decisions V2.8 software. On the other hand, layers corresponding to sub-criteria were made in ArcGIS 10.3 simultaneously, then via a weighted overlay (map algebra), a locating plan was created. In the next step seven hypothetical tall buildings (20 stories), in the best part of the locating plan, were considered to evaluate how much of theses hypothetical buildings would be visible (fuzzy visibility) from the street and open spaces throughout the city. These processes have been modeled by MATLAB software, and the final fuzzy visibility plan was created by ArcGIS. Fuzzy visibility results can help city managers and planners to choose which location is suitable for a tall building and how much visibility may be appropriate. The proposed model can locate tall buildings based on technical and visual criteria in the future development of the city and it can be widely used in any city as long as the criteria and weights are localized. KW - Gebäude KW - Energieeffizienz KW - Sustainability KW - Infrastructures KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43350 UR - https://www.mdpi.com/2076-3417/10/17/6072 VL - 2020 IS - Volume 10, issue 17, article 6072 SP - 1 EP - 25 PB - MDPI CY - Basel ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian T1 - A moving least squares weighting function for the element-free Galerkin method which almost fulfills essential boundary conditions JF - Structural Engineering and Mechanics N2 - A moving least squares weighting function for the element-free Galerkin method which almost fulfills essential boundary conditions KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 315 EP - 332 ER - TY - JOUR A1 - El-Rayes, Khaled A1 - Hyari, Khalied T1 - A Multi-objective Model for Optimizing Construction Planning of Repetitive Infrastructure Projects N2 - This paper presents the development of a model for optimizing resource utilization in repetitive infrastructure projects. The model provides the capability of simultaneous minimization of both project duration and work interruptions for construction crews. The model provides in a single run, a set of nondominated solutions that represent the tradeoff between these two objectives. The model incorporates a multiobjective genetic algorithm and scheduling algorithm. The model initially generates a randomly selected set of solutions that evolves to a near optimal set of tradeoff solutions in subsequent generations. Each solution represents a unique scheduling solution that is associated with certain project duration and a number of interruption days for utilized construction crews. As such, the model provides project planners with alternative schedules along with their expected duration and resource utilization efficiency. KW - Mehragentensystem KW - Lernendes System KW - Infrastruktur Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2135 ER - TY - JOUR A1 - Most, Thomas T1 - A natural neighbour-based moving least-squares approach for the element-free Galerkin method JF - International Journal for Numerical Methods in Engineering N2 - A natural neighbour-based moving least-squares approach for the element-free Galerkin method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 224 EP - 252 ER - TY - JOUR A1 - Saadatfar, Hamid A1 - Khosravi, Samiyeh A1 - Hassannataj Joloudari, Javad A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - A New K-Nearest Neighbors Classifier for Big Data Based on Efficient Data Pruning JF - Mathematics N2 - The K-nearest neighbors (KNN) machine learning algorithm is a well-known non-parametric classification method. However, like other traditional data mining methods, applying it on big data comes with computational challenges. Indeed, KNN determines the class of a new sample based on the class of its nearest neighbors; however, identifying the neighbors in a large amount of data imposes a large computational cost so that it is no longer applicable by a single computing machine. One of the proposed techniques to make classification methods applicable on large datasets is pruning. LC-KNN is an improved KNN method which first clusters the data into some smaller partitions using the K-means clustering method; and then applies the KNN for each new sample on the partition which its center is the nearest one. However, because the clusters have different shapes and densities, selection of the appropriate cluster is a challenge. In this paper, an approach has been proposed to improve the pruning phase of the LC-KNN method by taking into account these factors. The proposed approach helps to choose a more appropriate cluster of data for looking for the neighbors, thus, increasing the classification accuracy. The performance of the proposed approach is evaluated on different real datasets. The experimental results show the effectiveness of the proposed approach and its higher classification accuracy and lower time cost in comparison to other recent relevant methods. KW - Maschinelles Lernen KW - Machine learning KW - K-nearest neighbors KW - KNN KW - classifier KW - big data KW - clustering KW - cluster shape KW - cluster density KW - classification KW - reinforcement learning KW - data science KW - computation KW - artificial intelligence KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200225-40996 UR - https://www.mdpi.com/2227-7390/8/2/286 VL - 2020 IS - volume 8, issue 2, article 286 PB - MDPI ER - TY - JOUR A1 - Schirmer, Ulrike A1 - Osburg, Andrea T1 - A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study JF - SN Applied Sciences N2 - The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG–MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG–MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower. KW - Zement KW - Polymere KW - polymer adsorption KW - cement KW - visible spectrophotometry KW - depletion method KW - mass spectrometry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210804-44729 UR - https://link.springer.com/article/10.1007/s42452-020-03825-5 VL - 2020 IS - Volume 2, article 2061 SP - 1 EP - 11 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Thoi, T. A1 - Bordas, Stéphane Pierre Alain T1 - A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates JF - Computational Mechanics N2 - A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2010 SP - 679 EP - 701 ER - TY - JOUR A1 - Jia, Yue A1 - Zhang, Yongjie A1 - Rabczuk, Timon T1 - A Novel Dynamic Multilevel Technique for Image Registration JF - Computers and Mathematics with Applications N2 - A Novel Dynamic Multilevel Technique for Image Registration KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Nguyen-Tuan, Long A1 - Lahmer, Tom A1 - Datcheva, Maria A1 - Stoimenova, Eugenia A1 - Schanz, Tom T1 - A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses JF - Computers and Geotechnics N2 - A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 23 EP - 32 ER - TY - JOUR A1 - Ibanez, Stalin A1 - Kraus, Matthias T1 - A Numerical Approach for Plastic Cross Cross-Sectional Analyses of Steel Members JF - ce/papers N2 - Global structural analyses in civil engineering are usually performed considering linear-elastic material behavior. However, for steel structures, a certain degree of plasticization depending on the member classification may be considered. Corresponding plastic analyses taking material nonlinearities into account are effectively realized using numerical methods. Frequently applied finite elements of two and three-dimensional models evaluate the plasticity at defined nodes using a yield surface, i.e. by a yield condition, hardening rule, and flow rule. Corresponding calculations are connected to a large numerical as well as time-consuming effort and they do not rely on the theoretical background of beam theory, to which the regulations of standards mainly correspond. For that reason, methods using beam elements (one-dimensional) combined with cross-sectional analyses are commonly applied for steel members in terms of plastic zones theories. In these approaches, plasticization is in general assessed by means of axial stress only. In this paper, more precise numerical representation of the combined stress states, i.e. axial and shear stresses, is presented and results of the proposed approach are validated and discussed. KW - Stahlkonstruktion KW - Plastizität KW - Strukturanalyse KW - Stahlbauteil KW - Axialspannung KW - Finite-Elemente-Methode Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220112-45622 UR - https://onlinelibrary.wiley.com/doi/full/10.1002/cepa.1527 VL - 2021 IS - Volume 4, issue 2-4 SP - 2098 EP - 2106 PB - Ernst & Sohn, a Wiley brand CY - Berlin ER - TY - JOUR A1 - Kerfriden, Pierre A1 - Goury, O. A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain T1 - A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics JF - Computer Methods in Applied Mechanics and Engineering N2 - A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 169 EP - 188 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Nguyen-Xuan, Hung A1 - Chen, Lei A1 - Lee, C.K. A1 - Zi, Goangseup A1 - Zhuang, Xiaoying A1 - Liu, G.R. A1 - Rabczuk, Timon T1 - A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics JF - Journal of Applied Mathematics N2 - This paper presents a novel numerical procedure based on the combination of an edge-based smoothed finite element (ES-FEM) with a phantom-node method for 2D linear elastic fracture mechanics. In the standard phantom-node method, the cracks are formulated by adding phantom nodes, and the cracked element is replaced by two new superimposed elements. This approach is quite simple to implement into existing explicit finite element programs. The shape functions associated with discontinuous elements are similar to those of the standard finite elements, which leads to certain simplification with implementing in the existing codes. The phantom-node method allows modeling discontinuities at an arbitrary location in the mesh. The ES-FEM model owns a close-to-exact stiffness that is much softer than lower-order finite element methods (FEM). Taking advantage of both the ES-FEM and the phantom-node method, we introduce an edge-based strain smoothing technique for the phantom-node method. Numerical results show that the proposed method achieves high accuracy compared with the extended finite element method (XFEM) and other reference solutions. KW - Finite-Elemente-Methode KW - Steifigkeit KW - Bruchmechanik KW - Riss Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31676 ER - TY - JOUR A1 - Foorgber, U. A1 - Müller, Christian T1 - A Planning Process Model for Computer Supported Cooperative Work in Building Construction N2 - Increasing complexity of today's buildings requires a high level of integration in the planning process. Common planning strategies, where individual project partners cooperate mainly to exchange results, are not suitable to jointly develop project goals and objectives. Integrated planning, a more holistic approach to deal with complex problems, is based on a high degree of communication amoung team members and leads to a goal oriented cooperation. Current approaches in the reasearch area of Computer Supported Cooperative Work (CSCW) poorly meet the requirements in planning. A planning process model, based on the principles of integrated planning will be introduced, aimed to provide the background for the implementation of a CSCW-platform. KW - Bauwesen KW - Integrierte Planung KW - Computer Supported Cooperative Work Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4922 ER - TY - JOUR A1 - Döring, R. A1 - Hoffmeyer, J. A1 - Seeger, T. A1 - Vormwald, Michael T1 - A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading JF - Computational Materials Science N2 - A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2003 SP - 587 EP - 596 ER - TY - JOUR A1 - Mironov, Vadim A1 - Pahl, Peter Jan T1 - A Prismatic Finite Element for Accurate Arch Dam Analysis N2 - The displacements and stresses in arch dams and their abutments are frequently determined with 20-node brick elements. The elements are distorted near the contact plane between the wall and the abutment. A cantilever beam testbed has been developed to investigate the consequences of this distortion. It is shown that the deterioration of the accuracy in the computed stresses is significant. A compatible 18-node wedge element with linear stress variation is developed as an alternative to the brick element. The shape of this element type is readily adapted to the shape of the contact plane. It is shown that the accuracy of the computed stresses in the vicinity of the contact plane is improved significantly by the use of wedge elements. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Dammbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2467 ER -