TY - CHAP A1 - Ma, Zhiliang A1 - Wong, K. D. A1 - Yang, Jun T1 - An Approach to Utilizing Exchanged Documents in Construction Projects Based on Data Warehouse Technology N2 - There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept KW - Exchanged Documents KW - Managment Information System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1227 ER - TY - CHAP A1 - O'Brien, William A1 - El-Mashaleh, Mohammad T1 - An Empirical Study Relating Construction Firm Performance and IT Utilization N2 - This paper examines the impact of information technology (IT) utilization on construction firm performance. Based on empirical data collected from 74 US construction firms, the analyses provide evidence that IT has a positive impact on overall firm performance, schedule performance, and cost performance. Firm performance is a composite score of several metrics of performance: schedule performance, cost performance, customer satisfaction, safety performance, and profit. No relationship is found between IT utilization and customer satisfaction, safety, or profit, although this may be due to limitations of the study given strong correlations between IT utilization and cost and schedule performnance. The empirical evidence of positive association between performance and IT use provided by this research is significant to both construction practice and research literature. This evidence should encourage firms to adopt and invest in IT tools. KW - Architektur KW - Verteiltes System KW - Informationstechnik KW - Unternehmen Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1739 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Yoshimura, Yutaka T1 - An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps N2 - This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations. KW - Wissensmanagement KW - Stahlbau KW - Wasserkraftwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2564 ER - TY - CHAP A1 - Lau, Gloria A1 - Law, Kincho T1 - An Information Infrastructure for Comparing Accessibility Regulations and Related Information from Multiple Sources N2 - This paper describes a research project that addresses the difficulties in dealing with regulatory documents such as national and regional codes. These documents tend to be voluminous, heavily cross-referenced, possibly ambiguous and even conflicting at times. There are often multiple documents that need to be consulted and satisfied; however it is a difficult task to locate all of the relevant provisions. In addition, sections dealing with the same or similar conceptual ideas sometimes lay down conflicting requirements. We propose a framework for regulation representation, analysis and comparison with emphasis on the extraction of similarities between provisions. We focus on accessibility regulations, whose intent is to provide the same or equivalent access to a building and its facilities for disabled persons. An XML regulatory repository is developed to extract structural as well as non-structural features from government regulations to help user understanding and computational analysis. A similarity analysis is performed between different sources of regulations. In order to achieve a better comparison between provisions, we employ a combination of feature matching and structural analysis. Results are shown on comparisons between American and European codes, as well as on the domain of electronic-rulemaking. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensmanagement KW - Standardisierung KW - Behinderte Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1922 ER - TY - CHAP A1 - Raue, Erich A1 - Weitzmann, Rüdiger T1 - Analysis and Design of Hybrid Structures using Optimization Strategies N2 - The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes. KW - Konzipieren KW - Bauwerk KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1023 ER - TY - JOUR A1 - van Treeck, Christoph A1 - Rank, Ernst T1 - Analysis of building structure and topology based on Graph Theory N2 - Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Graphentheorie KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2308 ER - TY - JOUR A1 - Chang, Chihyuan A1 - Chang, Yuanchu A1 - Huang, Shyhmeng T1 - Application of a Agent Mechanism to the Small-scale Maintenance of School Buildings N2 - This paper presents an agent-based software, Virtual Administrator System (VAS) for the smallscale maintenance of school buildings. VAS is capable of handling a heavy load of routine, lowtech maintenance jobs. It assigns a different priority to each job application according to its significance and urgency, and automatically adjusts schedules for maintenance engineers when on-site supervision is needed. The system can help ease off the burden of routine small-scale maintenance work, making it more cost-effective and efficient in the overall management of school building maintenance. VAS posts jobs on the Web in a multi-media format and classified all applications into four categories: the on-call maintenance contract, the term maintenance contract, the guaranty maintenance contract, and the regular maintenance contract. It then estimates their urgency level and passes the information to maintenance engineers who will decide whether on-site inspection is needed. Based on the engineers’ feedback, VAS automatically implements the scheduling for inspection as well as sends out real-time or batch notifications to contractors. All these activities are recorded in a database to allow continuous research and data mining and the analysis and diagnosis of specific jobs for followup maintenance plans. KW - Mehragentensystem KW - Lernendes System KW - Schulgebäude KW - Facility-Management Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2165 ER - TY - JOUR A1 - Most, Thomas A1 - Eckardt, Stefan T1 - Application of a hybrid parallelization technique to accelerate the numerical simulation of nonlinear mechanical problems N2 - This paper presents the combination of two different parallelization environments, OpenMP and MPI, in one numerical simulation tool. The computation of the system matrices and vectors is parallelized with OpenMP and the solution of the system of equations is done with the MPIbased solver MUMPS. The efficiency of both algorithms is shown on several linear and nonlinear examples using the Finite Element Method and a meshless discretization technique. KW - Framework KW - API KW - Parallelverarbeitung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2599 ER - TY - CHAP A1 - Jianping, Zhang A1 - Tianyi, Ma A1 - Qiping, Shen T1 - Application of Data Warehouse and Data Mining in Construction Management N2 - All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1247 ER - TY - JOUR A1 - Melnikov, B. E. A1 - Semenov, Artem T1 - Application of Multimodel Method of Elasto-Plastic Analysis for the Multilevel Computation of Structures N2 - Creation of hierarchical sequence of the plastic and viscoplastic models according to different levels of structure approximations is considered. Developed strategy of multimodel analysis, which consists of creation of the inelastic models library, determination of selection criteria system and caring out of multivariant sequential clarifying computations, is described. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined nonproportional loading. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Elastoplastizität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2487 ER - TY - THES A1 - Bock, Sebastian T1 - Approximation mit polynomialen Lösungen der Laméschen Differentialgleichung T1 - Approximation with Polynomial Solutions of Lamé Differential Equation N2 - Grundidee der Arbeit ist es, Lösungen von Randwertaufgaben durch Linearkombinationen exakter klassischer Lösungen der Differentialgleichung zu approximieren. Die freien Koeffizienten werden dabei durch die Bestimmung der besten Approximation der Randwerte berechnet. Als Basis der Approximation werden vollständige orthogonale und nahezu orthogonale Funktionensysteme verwendet. Anhand ausgewählter Beispiele mit Randvorgaben unterschiedlicher Glattheit wird am Beispiel der Kugel die prinzipielle Anwendbarkeit der Methode getestet und hinsichtlich der Entwicklung des Fehlers der Näherungslösung, der Stabilität des Verfahrens und des numerischen Aufwandes untersucht. Die erhaltenen Resultate geben einen begründeten Anlass, die Anwendung der Methode als Bestandteil einer hybriden analytisch-numerischen Methode, insbesondere der Verknüpfung mit der FEM, weiterzuverfolgen. KW - Legendre-Funktion KW - Lamé-Gleichung KW - Festkörpermechanik KW - Orthonormalbasis KW - Beste Approximation KW - Fourier-Reihe KW - Hyperholomorphe-Funktion KW - spherical harmonics KW - Lamé-equation KW - continuum mechanic KW - complete orthonormal system KW - best approximation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6409 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Nguyen, Thu Huong T1 - Architektonische Grundlage für die Entwicklung von barrierefreien berufsbildenden Schulen für die Integration von Seh- und Mobilitätsbehinderten sowie nichtbehinderten Menschen in Vietnam T1 - Architectural Standard for Accessibility of mobile and visually impaired students in vocational schools - Vietnam N2 - Im Gegensatz zu Industrieländern wird das barrierefreie und behindertengerechte Planen und Bauen von öffentlichen Gebäuden in Entwicklungsländern aus wirtschaftlichen und sozialen Gründen nur ungenügend berücksichtigt und realisiert. Die Analyse von international vorhandenen Normen und Richtlinien zeigte, dass in Vietnam die Integration behindertengerechter Konzepte in Bauplanungen erst seit dem Jahr 2002 stattfindet, wohingegen diese in China bereits seit den 80er Jahren und in den Industrienationen wie Deutschland und Amerika sogar schon seit drei Jahrzehnten Anwendung findet. Die ungenügende Berücksichtigung behindertengerechter Baukonzepte in öffentlichen Einrichtungen, so auch vor allem in Berufsschulen bewirkt eine drastische Reduzierung des Ausbildungsplatzangebotes und eine resultierende Perspektivlosigkeit für behinderte Menschen. Durch die schnelle Errichtung barrierefreier, behindertengerechter Ausbildungseinrichtungen sollen sich die Chancen auf einen Ausbildungsplatz für behinderte Vietnamesen deutlich verbessern. Mit dem Erhalt eines Ausbildungsplatzes wird diesen Menschen nicht nur eine Integration in die Gesellschaft sondern langfristig gesehen auch finanzielle Selbständigkeit und somit Unabhängigkeit von der Familie ermöglicht. Als Grundlage des angestrebten Umwandlungsprozesses von der herkömmlichen barrierebelasteten Bauplanung zur Berücksichtigung von behinderten Menschen durch behindertengerechte Planungskonzepte wurden Bauzeit, Bauumfang und Baukosten eingehend analysiert. Dieser vergleichenden Betrachtung der Bauplanungen entwuchsen zwei neue barrierefreie Berufschultypen. Der neue Berufsschultyp 1 – Der Dezentralisierungstyp zeichnet sich durch einen geringfügigen Bauumfang und durch seine einfache Baukonstruktion aus und ermöglicht somit eine schnelle Reaktion auf den gravierenden Ausbildungsplatzmangel für behinderte Menschen. Dieser kostengünstige Berufsschultyp wurde entwickelt, um sehr kurzfristig eine schnelle Erhöhung des Ausbildungsplatzangebotes für behinderte Menschen zu schaffen. Siedlungs- und Wohngebiete bzw. Dörfer eignen sich am besten als Standort für den Berufsschultyp 1. Das ursprüngliche Wohnumfeld bliebe den behinderten Schülern erhalten und damit einhergehend auch die seelische Unterstützung durch deren Familien. Der familiennahe Standort der Berufsschule würde somit sowohl den Lehrern als auch den Schülern eine große seelische Last abnehmen. Des Weiteren ließe sich eine Berufsschule vom Typ 1 schnellstens errichten, so dass die Ausbildung der behinderten und nicht behinderten Schüler sofort aufgenommen werden könnte. Im Zuge der Entwicklung des neuen Berufsschultyps 2 – Dem Zentralisierungstyp - wurden internationale Standards angestrebt. Dieser Berufsschultyp bietet eine umfangreichere Flexibilität in seiner Nutzungsart, ein umfassenderes Angebot an Ausbildungsgängen und ein weitaus größeres Feld der Integration. Der Berufsschultyp 2 ist ein komplexer Bau, mit einem größeren Bauumfang als Berufsschultyp 1. Bei der Errichtung dieser Berufsschultypen ist mit einer langfristigen Planungs- und Bauzeit zu rechnen. Der Stadtrand wird als der optimale Standort zur Errichtung der Berufsschule vom Typ 2 angesehen. Von dort aus ließen sich die öffentlichen Service der Stadt effizient nutzen. Als Bewertungsgrundlage für eine optimale Entwicklung der beiden neuen Berufsschultypen dienen Basisdaten aus umfassenden Analysen über verschiedenste Betrachtungsebenen. Unter Nutzung der in Deutschland und USA bestehenden gesetzlichen Grundlagen sollen barrierefreie Planungsempfehlungen, gezielt für die Errichtung behindertengerechter berufsausbildender Schulen in Vietnam, abgleitet werden, um ein gemeinsames Lernen von seh- und mobilitätsbehinderten sowie von nicht behinderten Menschen zu ermöglichen. Bei den Planungsempfehlungen finden nicht nur die unterschiedlichen menschlichen Körpergrößen der verschiedenen Bevölkerungsgruppen sondern auch die unterschiedliche Lebensweise der Vietnamesen sowie die Klimabedingungen in Vietnam Berücksichtigung. Bei der Planung von behindertengerechten Ausbildungs- und Schuleinrichtungen ist es wichtig, die Körpergröße der Menschen des jeweiligen Landes zu berücksichtigen. Als Orientierungsmaß für die Körpergröße vietnamesischer Menschen wurde ein Richtfaktor definiert und eingesetzt. Anhand der o.g. Richtfaktorgrößen wurden detaillierte Planungsempfehlungen für barrierefreies Lernen und Wohnen herausgearbeitet. N2 - As Vietnam braces to deal with development pressures and economic issues the plight of the handicapped population remains largely unrecognized. A large segment (7%) of the population is devoid of any benefits from social policies that are seen in the West. One of the purposes of doing this thesis is to study this segment of the population, and develop an approach that is practical for Vietnam, to provide facilities for uplifting this disabled populace. I hope it acts as a guide or a framework for the planners in Vietnam for improving the potential of the disabled in the workforce. Throughout the body of work presented i have tried to compare and assess elements in Western conditions and Vietnam and have tried to draw conclusions on applicable and practical concepts that can be implemented in Vietnam. KW - Berufsschule KW - Barrierefreiheit KW - Vietnam KW - Schüler / Behinderung KW - Behinderter KW - Behindertengerechtes Bauen KW - Accesible KW - Vocational KW - School KW - Vietnam Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050707-6857 ER - TY - THES A1 - Schweigel, Stefan T1 - Aufnahme des Baufortschritts in verteilter Umgebung N2 - Als Folge des hohen Termindrucks während des Bauablaufes, ist es besonders wichtig den Fortschritt eines Bauvorhabens zeitnah zu überwachen. Auf Großbaustellen kann die effektive Kontrolle nicht mehr ohne technische Hilfsmittel durchgeführt werden. Die Arbeit stellt verschiedene Szenarien für die verteilte Fortschrittserfassung vor und untersucht welche Anforderungen an ein System für die verteilte Erfassung gestellt werden. Dazu wird zuerst das bestehende CVS-System analysiert, um anschließend daraus ein Konzept für die Versionierung von Objekten und den automatischen Abgleich von Objektversionen zu entwickeln. Später wird gezeigt, wie dieses Konzept mit Hilfe von C# und dem Microsoft®-.NET-Framework umgesetzt werden kann. KW - Computer Supported Cooperative Work KW - Versionsverwaltung KW - CVS KW - Microsoft dot net KW - computergestützte Baufortschrittskontrolle KW - Versionskontrolle KW - Objektversionierung KW - Versionsabgleich KW - Versionsverschmelzung KW - Computer Aided Progress Monitoring KW - reconciliation KW - merge KW - concurrency control KW - versions Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1534 ER - TY - JOUR A1 - Kang, Shihchung A1 - Miranda, Eduardo T1 - Automated Simulation of the Erection Activities in Virtual Construction N2 - The goal of the research is the development of a computer system to plan, simulate and visualize erection processes in construction. In the research construction cranes are treated as robots with predefined degrees of freedom and crane-specific motion planning techniques are developed to generate time-optimized and collision-free paths for each piece to be erected in the project. Using inverse kinematics and structural dynamics simulation, the computer system then computes the crane motions and velocities necessary to achieve the previously calculated paths. The main benefits of the research are the accurate planning and scheduling of crane operations leading to optimization of crane usage and project schedules, as well as improving overall crane safety in the project. This research is aimed at the development of systems that will allow computer-assisted erection of civil infrastructure and ultimately to achieve fully-automated erection processes using robotic cranes... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2310 ER - TY - JOUR A1 - Erlemann, Kai T1 - BABSIM - An object-oriented software framework for microscopic simulation of freeway traffic N2 - A wide variety of behavioural models exist in microscopic traffic simulation. Commercial programms often use closed-source policies and are confined to their respective simulation platforms. Open-source approaches mainly focus on distinctive, highly specialized traffic situations. In the scope of this paper, an open-source framework for developing modular, objectoriented simulation systems is presented, capable of simultaneously accommodating different driving models and enabling the user to modify and extend the catalogue of driving behaviours. The existing driving behaviours and the computational implementation of the simulation are being described. KW - Framework KW - API KW - Verkehrsplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2601 ER - TY - THES A1 - Adami, Kay T1 - Beitrag zur physikalisch nichtlinearen Analyse von Aussteifungssystemen mit Methoden der mathematischen Optimierung T1 - Physically non-linear analysis of structural systems by methods of mathematical programming N2 - Das Ziel der vorliegenden Arbeit besteht in der Entwicklung einer Strategie zur physikalisch nichtlinearen Analyse von Aussteifungssystemen. Der Anwendungsschwerpunkt umfasst neben dem traditionellen Aufgabenumfang zur Analyse neu zu errichtender Tragwerke gleichzeitig auch Planungsaufgaben, die mit Umbau- und Sanierungsmaßnahmen verbunden sind. Veränderungen, die sich während der Nutzungsgeschichte oder im Revitalisierungsprozess ergeben, werden in den Berechnungsmodellen berücksichtigt. In vielen Fällen ist es aus planerischer Sicht zweckmäßig, die Nichtlinearität des Materialverhaltens zur Erschließung von Tragreserven in den normativen Nachweiskonzepten mit einzubeziehen. Der damit verbundene numerische Aufwand wird durch die Verwendung separater Modelle zur Erfassung des Querschnitts- und des Systemtragverhaltens begrenzt, ohne die Komplexität der Aufgabenstellung zu reduzieren. Aus detaillierten Querschnittsuntersuchungen der Tragwände werden integrale Materialbeziehungen abgeleitet, welche die Grundlage für die nichtlineare Tragwerksanalyse darstellen. Die Modellbildung gegliederter Aussteifungswände basiert auf deren Zerlegung in ebene finite Stabsegmente, die sich durch die Diskretisierung in Längs- und in Querrichtung ergeben. Zusätzlich zu den an den Stabenden angreifenden Normalkräften, Querkräften und Biegemomenten werden an den Elementlängsrändern Schubbeanspruchungen erfasst. Die physikalische Nichtlinearität wird durch die Einbeziehung integraler Materialbeziehungen an den Segmenträndern berücksichtigt. Die numerische Umsetzung erfolgt mit Methoden der mathematischen Optimierung. Die Leistungsfähigkeit der Berechnungsstrategie wird exemplarisch anhand von Untersuchungen an Aussteifungssystemen in Großtafelbauweise nachgewiesen. N2 - In this thesis a strategy to physically non-linear analysis of multi-storey buildings will be developed. With respect to reconstruction and revitalisation the structural system as well as the loadings can be modified. If the determination of internal forces is based on the assumption of linear elastic material behaviour, the bearing capacity of the structural system will be often not checkable. In this context it is reasonable to use models, which include non-linear effects. The investigated wall assemblies are subdivided into elementary wall elements, normally rectangular. At the edges of elements shear forces secures the compatibility between the individual walls. The physically non-linearity will be included by multi-linear material laws. The mechanical problem for determination of internal forces und deformations will be formulate as extremum principle with contraints. The mechanical model presented in this thesis shall be demonstrate on a structural system of large planel structure. KW - Stahlbeton KW - Nichtlineare Berechnung KW - Optimierung KW - Extremalprinzip KW - Revitalisierung KW - Aussteifungssystem KW - Großtafelbauweise KW - physikalisch nichtlinear KW - concrete KW - physically non-linear analysis KW - mathematical programming KW - revitalisation KW - large panel buildings Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040329-812 ER - TY - THES A1 - Wuttke, Frank T1 - Beitrag zur Standortidentifizierung mit Oberflächenwellen T1 - Site identification using surface waves N2 - In der Dissertation wurden unterschiedliche Methoden zur Standortidentifizierung mit Oberflächenwellen analysiert. Es wurden neue Methoden zur Parameteridentifikation unter Nutzung von Oberflächenwellen vorgeschlagen. Die Ziele der Arbeit können wie folgt definiert werden: a) Die Entwicklung eines geeigneten theoretischen Modells als Grundlage zur Untersuchung des Standortes hinsichtlich vorhandener Bodensteifigkeiten. b) Die Entwicklung einer neuen Inversionsmethodik unter Berücksichtigung aller auftretenden Moden im Oberflächenwellenfeld. Die Erstellung eines Modells des vertikal heterogenen Untergrundes erfolgte im Frequenz-bereichs für beliebig geschichtete Böden, aufbereitet durch weitestgehend analytische Formulierungen. Durch Nutzung beliebiger horizontaler, elastisch-isotroper Schichten konnte die vertikale Heterogenität approximiert werden. Die Definition der Green'schen Funktionen wurde in Form der Reflexions- und Transmissionskoeffizienten durchgeführt. Die Lösung des formulierten Halbraumproblems erfolgte unter Verwendung der Konturintegration. Dazu wurde die Vorgehensweise der bestehenden Lösung des homogenen Halbraums auf das Problem des geschichteten Mediums übertragen. Die daraus sich ergebende Lösung ist in ein Körperwellen- und ein Oberflächenwellenfeld separiert. Der Vorteil dieser analytischen Betrachtungsweise liegt in der eindeutigen Zuordnungsmöglichkeit der erhaltenen Lösungen zu Wellentypen und in der klaren Dispersionscharakteristik der berechneten Modelle. Im Gegensatz dazu liefern numerische Lösungen, wie FEM, immer ein Wellenfeld, in dem die Wellentypen zugeordnet bzw. interpretiert werden müssen. Mit Hilfe der synthetischen Bodenmodellierung wird das Verhalten von geschichteten Böden bei durchlaufenden Oberflächenwellenfeldern simuliert und untersucht. Für die Untersuchung der Profile wurde hauptsächlich die Modale Superposition von Oberflächenwellen und die Wellenzahl-Integration verwendet. Bei der Analyse von Oberflächenwellenfeldern in vorhandenen Medien sind abweichend von den üblichen seismischen Methoden spezielle Untersuchungsmethoden zur Ermittlung der vorhandenen Dispersion notwendig. Zur Durchführung der Dispersionsanalyse wird in geotechnischen Untersuchungen in der Regel das Phasen-Differenzen-Verfahren (SASW) genutzt. Aufgrund der beschränkten Aussagefähigkeit dieses Verfahrens zu auftretenden höheren Moden werden verbesserte Analysemethoden zur experimentellen Auswertung hinzugezogen. Diese Methoden nutzen zur Informationsgewinnung das räumlich ausgedehnte Wellenfeld. Ausgehend von dem Dispersionsverhalten kann die Bodenstruktur mittels inverser Methoden bestimmt werden. Für die gemeinsame Inversion der in den Messungen vorhandenen Moden wurde ein entsprechendes Inversionsverfahren abgeleitet. Als Grundlage der Inversion wurde ein Verfahren des kleinsten Fehlerquadrates gewählt. Der Vorteil hinsichtlich einer effizienten und stabilen Inversion unter Nutzung dieser Methodik überwiegt den Nachteil der lokalen Suche nach dem Fehlerminimum. Zum Erreichen der stabilen und zielgerichteten Inversion wird der Levenberg-Marquardt Algorithmus, zusammen mit der Wichtung der Dispersionsäste entsprechend ihres Anregungsverhaltens in den Dispersionsspektren, eingesetzt. Von Vorteil hat sich innerhalb der Arbeit die gleichzeitige Behandlung von theoretischen und experimentellen Parameterstudien erwiesen, da sich Ergebnisse und Erkenntnisse beider Seiten ergänzten. Eine Interpretation von Felddaten kann damit weitaus sicherer durchgeführt werden. Zusätzlich konnten die erarbeiteten experimentellen und theoretischen Verfahren gegenseitig überprüft werden. N2 - In this thesis various available methods for the site identification with surface waves were analyzed. Some new methods are proposed for the site identification using surface wave characteristics. The objectives of the thesis are as follows: a) To develop an appropriate theoretical model that can work in conjunction with the results obtained from the site inverstigations to precisely identify the actual in situ stiffness profiles. b) To develop a new inversion procedure that enables to inverse all the appearing modes in a wave field. An appropriate model should be able to define the vertical heterogeniety of the subsoil. In this study, the existing solution for the homogeneous half space was extended to the stratified medium. An analytical formulation in the frequency domain was used for this purpose by considering arbitrary horizontal, elastic isotropic layers. The Green’s functions were defined in the matrix formulation in the form of reflection- and transmission coefficients. In this way the analytical considerations could be carried out in a strong mathematical procedure. The solution for the forced excited layered half space was obtained following the contour integration. The solution could be separated in to the body wave and the surface wave fields. The advantage of such an analytical approach lies in the definite allocation of the preserved solutions for wave types and the straight dispersion characteristic of the calculated models. The difference between the analytical and the numerical solutions, such as using FEM, is that the interpretation of the calculated wave field is not required in the former, whereas it is necessary in the latter case. With the help of an analytic wave field calculation the behavior of the propagate surface wave fields in the stratified media could be better simulated and examined. For the investigation of the stiffness profiles primarily the modal superposition by surface waves and the wave number-integration were used. Special surface wave field investigation methods were necessary for the determination of the available dispersion characterisic. For the realization of the dispersion analysis in geoengineering investigations the phase difference method (SASW) is a widely used tool. Since the information on the higher modes are limited, an improved method is proposed to separate the different modes from the experimental data. The proposed method used the spatially spread wave field for the dispersion information. The soil structure can be determined by using various inverse methods. For the joint inversion of all the available modes in the measurements, a suitable inversion procedure was derived. For the stabilization of the inversion procedure, a least square method was chosen. The disadvantage of this efficient method is a local minimum search of the objective function. To achieve a stable and focused inversion procedure the Levenberg-Marquardt algorithm was used. The different dispersion branches multiplied by weighting factors corresponds to the excitation behavior in the dispersion spectra. One particularly advantage in the work is the concurrent treatment of theoretical and experimental parameter studies. According this treatment, the results and cognitions of both sides were complementary. An interpretation of field data could be carried out reliably. In addition, the compiled experimental and theoretical procedures could be checked mutually. KW - Inversionsalgorithmus KW - Inversionstheorie KW - Wellenausbreitung KW - Anomale Dispersion KW - Dispersion KW - Energieübertragung KW - wave propagation KW - inversion procedure KW - inversion theorie KW - wave field dispersion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050708-6874 ER - TY - THES A1 - Kanzow, Ulrich Michael T1 - Beschreibung des Fließwiderstandes in der numerischen Berechnung von Gerinnen mit extremer relativer Rauheit T1 - Description of flow resistance in numerical simulation of channels with extreme relative roughness N2 - Die ein- und zweidimensionale numerische Berechnung der Fließvorgänge in offenen Gerinnen findet zunehmend auch Anwendung in der Modellierung immer komplexerer Prozesse im unter Anderem im Bereich der Ökosystemmodellierung in Gebirgs- und Mittelgebirgsbächen. In diesem Bereich existieren zurzeit noch Probleme hinsichtlich der hydraulischen Prognoserechnungen. Neben den numerischen Grundlagen werden die Abhängigkeiten des Strömungsfeldes von der Rauheitsstruktur der Sohle und der Überdeckungshöhe behandelt. Zur Untersuchung der Fließwiderstandsgleichungen wurden Laborversuche in einer Versuchsrinne durchgeführt. Es wird gezeigt, dass der üblicherweise verwendete Ansatz des mittleren Sohlgefälles bei der Berechnung der Sohlschubspannungsgeschwindigkeit u* in Stufen-Becken-Sequenzen nicht zulässig ist. Stattdessen ist es erforderlich, die lokalen Energieliniengefälle zu bestimmen und einzusetzen. Die Anwendung der aus der Literatur bekannten Ansätze zur Beschreibung des Fließwiderstandes führt zu keinen befriedigenden Ergebnissen und wird ausführlich diskutiert. In der Untersuchung der verschiedenen Fließwiderstandsbeziehungen zeigte sich, dass insbesondere die ungenügende Beschreibung der Rauheitstruktur der Sohloberfläche durch einen charakteristischen Korndurchmesser des Sohlmaterials als unzureichend anzusehen ist. Hinsichtlich der Beschreibung rauer Oberflächenstrukturen wurde ein einfacher Segmentierungsalgorithmus entwickelt, der es erlaubt, komplizierte Oberflächenstrukturen zu vereinfachen und über die Standardabweichung abschnittsweise Rauheiten zuzuweisen. Dieses Verfahren wird in einem zweidimensionalen hydraulischen Modell eingesetzt. Hierdurch wird für die Wassertiefenbestimmung als auch für die Fließgeschwindigkeitsbestimmung eine Berücksichtigung der speziellen topographischen Verhältnisse ermöglicht. N2 - One- and two-dimensional numerical simulations of open-channel flows are more and more used for applications of constantly more complex processes among other things in the field of ecohydraulics in mountainous streams. Among the principles of numerical simulation the flow field and its interdependence of roughness elements as well as flow depth are treated. Investigations are made in a laboratory flume. It is shown, that the usually used approach of average bed slope in step-pool sequences is not admissible instead of local energy slope. The application of approaches known from literary are not leading to satisfying results. The investigation of different resistance equations showed in particular that insufficient describing of roughness structures of bed level only by characteristic grain size fails. Regarding description of roughness structures was developed an simple segmentation algorithm which allows to simplify complex roughness structures. They are transformed to segments of similar standard deviation. This algorithm is inserted in an two-dimensional flow model. Therefore calculation of water depth and flow velocity can be done regarding topographic situation, e.g. step-pool sequences. KW - Rauigkeit KW - Direkte numerische Simulation KW - Strömungswiderstand KW - Oberflächenstruktur KW - Fließgewässer KW - Segmentierung KW - Oberflächenbeschreibung KW - Rauheitsparameter KW - Geschwindigkeitsverteilung KW - Stufen-Schwellen-Sequenzen KW - step-pool sequences KW - velocity distribution KW - roughness KW - surface structures KW - segmentation algorithm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050307-4181 ER - TY - CHAP A1 - Zarli, Alain A1 - Storer, Graham A1 - Kazi, Abdul Samad (Sami) T1 - Building a Better Future: Major Results from the ICCI Cluster Project N2 - To support research in the building sector and in order to help it move towards a new digital economy, the European Commission under the 5th Framework initiative, especially the IST programme, funded various RTD projects. The opportunity to bring these IST projects together was acknowledged so that stronger links can be created under a clustering umbrella and that, moreover, links of those projects with their RTD environment could be facilitated. This has been the objective of work carried out within the ICCI (IST-2001-33022) Cluster project. This paper introduces the main aims and objectives of the project, and then presents its principal outcomes. In a second part, it synthesises the underlying concepts, technology and tools that will make ICT-based Construction a reality in a near future, and gives recommended actions for the industry, the EC and the Construction ICT R&D in Europe, giving some benefit of this project experience to the three communities. KW - Forschung KW - Europa KW - Informationstechnik KW - Baubetrieb Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1994 ER - TY - JOUR A1 - Kabath, Meik A1 - Stuyts, Patrick T1 - Building Design towards 5-dimensions N2 - There exists a big gap between the capabilities of current 3D-CAD applications and their actual usage in practice. Many architects and planners still prefer to draft in 2D because the benefits of 3D modeling are difficult to explain. This presentation offers a basis to view the 3D building model not merely as the source for 2D plan generation. By adding extra dimensions like Time and Cost to the 3D building model it becomes possible to generate dynamic information on building construction progress with regards to used material, resources and cost. These additional benefits are key elements to many planners and contractors and may therefore widen the acceptance of 3D building modeling in general. KW - Bauindustrie KW - Baukonstruktion KW - Bauwerksplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2712 ER -