TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets JF - Computer Methods in Applied Mechanics and Engineering N2 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 98 EP - 112 ER - TY - THES A1 - Most, Thomas T1 - Stochastic crack growth simulation in reinforced concrete structures by means of coupled finite element and meshless methods N2 - The complex failure process of concrete structures can not be described in detail by standard engineering design formulas. The numerical analysis of crack development in concrete is essential for several problems. In the last decades a large number of research groups have dealt with this topic and several models and algorithms were developed. However, most of these methods show some difficulties and are limited to special cases. The goal of this study was to develop an automatic algorithm for the efficient simulation of multiple cracking in plain and reinforced concrete structures of medium size. For this purpose meshless methods were used to describe the growth of crack surfaces. Two meshless interpolation schemes were improved for a simple application. The cracking process of concrete has been modeled using a stable criterion for crack growth in combination with an improved cohesive crack model which can represent the failure process under combined crack opening and crack sliding very well. This crack growth algorithm was extended in order to represent the fluctuations of the concrete properties by enlarging the single-parameter random field concept for multiple correlated material parameters. N2 - Das komplexe Versagensverhalten von Betonstrukturen kann in der Regel nicht mit Standardbemessungsformeln beschrieben werden. Eine detaillierte numerische Analyse der Rissentwicklung in Beton ist für einige Problemstellungen unverzichtbar. In den letzten Jahrzehnten haben sich eine Vielzahl von Forschergruppen mit dieser Thematik aus-einandergesetzt. Dabei wurden verschiedene Modelle und Algorithmen entwickelt. Die meisten dieser Verfahren weisen jedoch verschiedene Probleme auf oder sind nur für Spezialfälle anwendbar. Das Ziel dieser Arbeit war die Entwicklung eines automatischen Algorithmus zur effizienten Simulation von mehrfacher Rissentwicklung in Beton- und Stahlbetonstrukturen mittlerer Größe. Dabei wurden netzfreie Verfahren angewendet, um die Änderung der Rissoberflächen abzubilden. Zwei netzfreie Interpolationstypen wurden im Hinblick auf eine unkomplizierte Anwendung angepaßt. Der Versagensprozess des Betons wurde mit Hilfe eines stabilen Risskriteriums in Kombination mit einem erwei-terten kohäsiven Rissmodell abgebildet. Dieses erweiterte Modell kann die Zusammenhänge bei kombinierter Rissöffnung und -gleitung sehr gut wiedergeben. Der entwickelte Algorithmus zur Risssimulation wurde in Hinblick auf eine stochastische Modellierung erweitert. Zu diesem Zweck wurde das Zufallsfeldkonzept für die Abbildung mehrerer untereinander korrelierter Materialparameter ergänzt. T2 - Stochastische Rissfortschrittsberechnung in bewehrten Betonstrukturen unter Kopplung der Finiten Elemente Methode mit netzfreien Verfahren KW - Gitterfreie Methode KW - Stochastik KW - Risssimulation KW - Stahlbeton KW - Meshless method KW - stochastic KW - crack simulation KW - reinforced concrete Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20051219-7623 ER - TY - JOUR A1 - Marzban, Samira A1 - Lahmer, Tom T1 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects JF - Journal of Statistical Theory and Practice N2 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 589 EP - 611 ER - TY - JOUR A1 - Lahmer, Tom A1 - Nguyen-Tuan, Long A1 - Könke, Carsten A1 - Bettzieche, Volker T1 - Thermo-hydro-mechanische 3-D-Simulation von Staumauern‐Modellierung und Validierung JF - WASSERWIRTSCHAFT N2 - Thermo-hydro-mechanische 3-D-Simulation von Staumauern‐Modellierung und Validierung KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 27 EP - 30 ER - TY - JOUR A1 - Lahmer, Tom A1 - Könke, Carsten A1 - Bettzieche, Volker T1 - Optimale Positionierung von Messeinrichtungen an Staumauern zur Bauwerksüberwachung JF - WASSERWIRTSCHAFT N2 - Optimale Positionierung von Messeinrichtungen an Staumauern zur Bauwerksüberwachung KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2010 SP - 16 EP - 16 ER - TY - JOUR A1 - Lahmer, Tom A1 - Könke, Carsten A1 - Bettzieche, Volker T1 - Optimal positioning of sensors for the monitoring of water dams JF - WASSERWIRTSCHAFT N2 - Optimal positioning of sensors for the monitoring of water dams KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2010 SP - 16 EP - 19 ER - TY - JOUR A1 - Lahmer, Tom A1 - Knabe, Tina A1 - Nikulla, Susanne A1 - Reuter, Markus T1 - Bewertungsmethoden für Modelle des konstruktiven Ingenieurbaus BT - Sonderdruck‐DFG Graduiertenkolleg JF - Bautechnik N2 - Bewertungsmethoden für Modelle des konstruktiven Ingenieurbaus KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2011 SP - 60 EP - 64 ER - TY - JOUR A1 - Lahmer, Tom A1 - Kaltenbacher, Manfred A1 - Kaltenbacher, Barbara A1 - Lerch, Reinhard A1 - Leder, Erich T1 - Fem-based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials JF - IEEE transactions on ultrasonics, ferroelectrics, and frequency control N2 - Fem-based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2008 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3594 ER - TY - JOUR A1 - Lahmer, Tom A1 - Kaltenbacher, Barbara A1 - Schulz, V. T1 - Optimal measurement selection for piezoelectric material tensor identification JF - Inverse Problems in Science and Engineering N2 - Optimal measurement selection for piezoelectric material tensor identification. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2008 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3593 SP - 369 EP - 387 ER - TY - JOUR A1 - Lahmer, Tom A1 - Ilg, J. A1 - Lerch, Reinhard T1 - Variance-based sensitivity analyses of piezoelectric models JF - Computer Modeling in Engineering & Sciences N2 - Variance-based sensitivity analyses of piezoelectric models KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 SP - 105 EP - 126 ER - TY - JOUR A1 - Lahmer, Tom A1 - Bock, Sebastian A1 - Hildebrand, Jörg A1 - Gürlebeck, Klaus T1 - Non-destructive identification of residual stresses in steel under thermal loadings JF - Inverse Problems in Science and Engineering N2 - Non-destructive identification of residual stresses in steel under thermal loadings KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 1 EP - 17 ER - TY - JOUR A1 - Lahmer, Tom T1 - Optimal experimental design for nonlinear ill-posed problems applied to gravity dams JF - Inverse Problems N2 - Optimal experimental design for nonlinear ill-posed problems applied to gravity dams KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2011 ER - TY - JOUR A1 - Lahmer, Tom T1 - Modified Landweber iterations in a multilevel algorithm applied to inverse problems in piezoelectricity JF - Journal of Inverse and Ill-posed Problems N2 - Modified Landweber iterations in a multilevel algorithm applied to inverse problems in piezoelectricity KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2009 SP - 585 EP - 593 ER - TY - JOUR A1 - Lahmer, Tom T1 - Crack identification in hydro-mechanical systems with applications to gravity water dams JF - Inverse Problems in Science and Engineering N2 - Crack identification in hydro-mechanical systems with applications to gravity water dams KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2010 SP - 1083 EP - 1101 ER - TY - JOUR A1 - Knabe, Tina A1 - Datcheva, Maria A1 - Lahmer, Tom A1 - Cotecchia, F. A1 - Schanz, Tom T1 - Identification of constitutive parameters of soil using an optimization strategy and statistical analysis JF - Computers and Geotechnics N2 - Identification of constitutive parameters of soil using an optimization strategy and statistical analysis KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2013 SP - 143 EP - 157 ER - TY - JOUR A1 - Keitel, Holger A1 - Karaki, Ghada A1 - Lahmer, Tom A1 - Nikulla, Susanne A1 - Zabel, Volkmar T1 - Evaluation of coupled partial models in structural engineering using graph theory and sensitivity analysis JF - Engineering structures N2 - Evaluation of coupled partial models in structural engineering using graph theory and sensitivity analysis KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2011 SP - 3726 EP - 3736 ER - TY - JOUR A1 - Kaltenbacher, Barbara A1 - Lahmer, Tom A1 - Mohr, Marcus A1 - Kaltenbacher, Manfred T1 - PDE based determination of piezoelectric material tensors JF - European Journal of Applied Mathematics N2 - PDE based determination of piezoelectric material tensors. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2006 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3595 SP - 383 EP - 416 ER - TY - JOUR A1 - Ilyani Akmar, A.B. A1 - Lahmer, Tom A1 - Bordas, Stéphane Pierre Alain A1 - Beex, L.A.A. A1 - Rabczuk, Timon T1 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties JF - Composite Structures N2 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.compstruct.2014.04.014 SP - 1 EP - 17 ER - TY - JOUR A1 - Hauck, A. A1 - Lahmer, Tom A1 - Kaltenbacher, Manfred T1 - Enhanced homogenization technique for magnetomechanical systems using the generalized finite element method JF - COMPEL: The international journal for computation and mathematics in electrical and electronic engineering N2 - Enhanced homogenization technique for magnetomechanical systems using the generalized finite element method KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2009 SP - 935 EP - 947 ER - TY - JOUR A1 - Hamdia, Khader A1 - Lahmer, Tom A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon T1 - Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS JF - Computational Materials Science N2 - Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 SP - 304 EP - 313 ER -