TY - THES A1 - Mukherjee, Nilangshu T1 - A numerical comparison of the impact of different climatic conditions in different geographic locations on the construction of an office building N2 - The aim of my research is to observe the variance of energy efficiency of a typical multi-story office building under the exposure of different climatic conditions. Energy efficiency requirements in building codes or energy standards are among the most important single measures for buildings’ energy efficiency. Therefore, this study can be set up for a better understanding of how energy efficiency of a building changes under the effect of adverse to moderate climatic conditions which possess a mentionable effect on the operation of a building. This thesis is structured in three balanced and conceptual steps. Following the aim of the project, the virtual building model is to be analyzed under the effect of seven distinct climatic conditions namely work environment of New Delhi, Mumbai, Berlin, Lisbon, Copenhagen, Dubai and Montreal. Firstly, the task is to do a complete literature research based on the scope of similar researches and studying the problems in detail along with the theoritical background all the concepts which are implemented to get the numerical results. This chapter also comprises a detailed study of the climatic conditions of the above-mentioned cities. Different climatic traits like temperature variations, count of heating and cooling degree days, relative humidity, temperature range and comfort zonal charts for the specified cities are studied in detail. This study helps to understand the effect of these adverse to moderate climates on the operation of the building. On the second step, the virtual building model is prepared on a software platform named Revit Structures. This virtual building model is not necessarily a complete building, but it has the relevant functionalities of a real building. We perform the energy analysis and the heating and cooling analysis on this virtual building model to study the operational outcome of the building under different climatic conditions in detail. By the end of these above two tasks, two scenarios are observed. On one hand, we have a literature research and on the other hand we have the numerical results. Therefore, finally we present a comparative scenario based on the energy efficient performances of the building under such variant climatic conditions. This is followed by the prediction of thermal comfort level inside the building and it based on Fanger’s PMV Model. Understanding the literature and the numerical values in detail helps us to predict the index thermal comfort level inside the building. The conclusion of this master thesis focuses mainly on the scopes of improvement of energy efficiency requirements in energy codes if any, differentiated according to specific locations. The initial aim of my hypothesis which is to study the impacts of climatic variations on the energy efficient performances of a building is fulfilled but as such topics have very deep and broad roots, the scope of further improvements is always predominant. KW - Klima KW - Energieeffizienz KW - Climatic conditions KW - Building performance Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170811-32700 ER - TY - THES A1 - Genc, Emir T1 - Decoding Public Life in Urban Soundscape: The Case of Weimar N2 - INTRODUCTION The research field of sound landscape and public life, initially drew my attention during the master class of ‘Media of the Urban’, originally ‘Medien des Urbanen, which was given by Prof. Dr. Gabriele Schabacher in the 2015 summer semester. For the relevant class, I conducted an conceptual case study in Istanbul, Beyoglu District, with the intention of analysing the perception of the space by urban sound. During the summer 2015 I recorded various sounds of different spatial settings and developed the analysis by comparing the situations. By that time, I realized the inherent property of the sound as a medium for our perception in urban context. In the 2015-2016 winter semester, I participated in the master class of the architectural project, named ‘Build Allegory’, which was given by Prof. Dipl.-Ing. Heike Büttner. The project was situated in Berlin Westkreuz, AVUS north curve, on the highway and was originally a race track from 1921. In this context, the aim of my project was to answer various questions, main of which was, how does the architectural form shape the sound of the place? And, how does the sound of the place shape the architectural from? Since the place is still serving mainly to the vehicles, although the function has differed, the sound objects and the context have remained. Through the existence of contextual references, I started with creating a computational tool for analysing the acoustic characteristics of this urban setting, which is fundamentally providing results as the sound cloud, driven from the sound ray tracing method. Regarding to this soundscape analysis method, which I developed, this computational tool assisted me to find an optimum reciprocal relation between architecture and sound. Since I have been working on soundscape in the context of architecture, urban situations, public life and public space, I was determined to produce a comprehensive research in this field and propound the hypothesis; the existence of the reciprocity between the social behaviours in public space and the sound landscape. In which extent does this reciprocity exist? What are the effects of the public life on the sonic configurations of the space and the other way around? KW - soundscape KW - social behaviour KW - weimar KW - sound landscape KW - urban case study KW - perceptual sound localization KW - public life KW - public space KW - Öffentlicher Raum Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170213-27438 ER - TY - THES A1 - Almasi, Ashkan T1 - Stochastic Analysis of Interfacial Effects on the Polymeric Nanocomposites N2 - The polymeric clay nanocomposites are a new class of materials of which recently have become the centre of attention due to their superior mechanical and physical properties. Several studies have been performed on the mechanical characterisation of these nanocomposites; however most of those studies have neglected the effect of the interfacial region between the clays and the matrix despite of its significant influence on the mechanical performance of the nanocomposites. There are different analytical methods to calculate the overall elastic material properties of the composites. In this study we use the Mori-Tanaka method to determine the overall stiffness of the composites for simple inclusion geometries of cylinder and sphere. Furthermore, the effect of interphase layer on the overall properties of composites is calculated. Here, we intend to get ounds for the effective mechanical properties to compare with the analytical results. Hence, we use linear displacement boundary conditions (LD) and uniform traction boundary conditions (UT) accordingly. Finally, the analytical results are compared with numerical results and they are in a good agreement. The next focus of this dissertation is a computational approach with a hierarchical multiscale method on the mesoscopic level. In other words, in this study we use the stochastic analysis and computational homogenization method to analyse the effect of thickness and stiffness of the interfacial region on the overall elastic properties of the clay/epoxy nanocomposites. The results show that the increase in interphase thickness, reduces the stiffness of the clay/epoxy naocomposites and this decrease becomes significant in higher clay contents. The results of the sensitivity analysis prove that the stiffness of the interphase layer has more significant effect on the final stiffness of nanocomposites. We also validate the results with the available experimental results from the literature which show good agreement. KW - Homogenization KW - Multiscale modeling KW - Nanocomposite materials KW - Stochastic analysis Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150709-24339 ER - TY - THES A1 - Lüdtke, Cornelius T1 - Systemidentifikation von Bauteilen mittels optischer Messmethoden N2 - Im Rahmen der Forschung an Bauteil- und Fügestellendämpfung wurden die Schwingungen der Bauteile bisher mit 1D-Laser-Vibrometern gemessen. Nun steht ein 3D-Laser-Scanner zur Verfügung. Diese Arbeit beschäftigt sich mit der Frage, ob mit dem 3D-Laser-Scanner bessere und weitere relevante Daten bei der Schwingungsmessung gewonnen werden können. KW - Schwingung KW - Schall KW - Dauerhaftigkeit KW - Eigenform KW - Vibrometer KW - Laser Scanner Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150706-24293 ER - TY - THES A1 - Damanik, Batta Septo Van Bahtiar T1 - Aerodynamic Analysis of Slender Vertical Structure and Response Control with Tuned Mass Damper N2 - Analysis of vortex induced vibration has gained more interest in practical held of civil engineering. The phenomenon often occurs in long and slender vertical structure like high rise building, tower, chimney or bridge pylon, which resulting in unfavorable responses and might lead to the collapse of the structures. The phenomenon appears when frequency of vortex shedding produced in the wake area of body meet the natural frequency of the structure. Even though this phenomenon does not necessarily generate a divergent amplitude response, the structure still may fail due to fatigue damage. To reduce the effect of vortex induced vibration, engineers widely use passive vibration response control system. In this case, the thesis studies the effect of tuned mass damper. The objective of this thesis is to simulate the effect of tuned mass damper in reducing unfavorable responses due to vortex induced vibration and initiated by numerical model validation with respect to wind tunnel test report. The reference structure that being used inside the thesis is Stonecutter Bridge, Hongkong. A numerical solver for computational uid dynamics named VX ow which developed by Morgenthal [6] is utilized for wind and structure simulation. The comparison between numerical model and wind tunnel result shows 10% maximum tip displacement diference in the model of full erection freestanding tower. The tuned mass damper (TMD) model itself built separately in finite element software SOFiSTiK, and the efective damping obtained from this model then applied inside input modal data of VX ow simulation. A single TMD with mass ratio of TMD 0.5% to the mass of first bending frequency, the maximum tip displacement is measured to be average 67% reduced. Considering construction limitation and robustness of TMD, the effects of multiple TMD inside a structure are also studied. An uncoupled procedure of applying aeroelastic loads obtained from VX ow inside finite element software SOFiSTiK is also done to observe the optimum distribution and optimum mass ratio of multiple tuned mass damper. The rest of the properties of TMD are calculated with Den Hartog's formula. The results are as follows: peak displacement in the case of multiple TMD that distributed with polynomial spacing achieve 7.8% more reduction performance than the one that distributed with equal spacing. Optimum mass of tuned mass damper achieved with ratio 1.25% mass of first bending frequency corresponds to across wind direction. KW - aerodynamic KW - wind KW - tuned mass damper KW - bridge KW - structure KW - Aerodynamic Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20151030-24714 ER - TY - THES A1 - Habtemariam, Abinet Kifle T1 - Numerical Demolition Analysis of a Slender Guyed Antenna Mast N2 - The main purpose of the thesis is to ensure the safe demolition of old guyed antenna masts that are located in different parts of Germany. The major problem in demolition of this masts is the falling down of the masts in unexpected direction because of buckling problem. The objective of this thesis is development of a numerical models using finite element method (FEM) and assuring a controlled collapse by coming up with different time setups for the detonation of explosives which are responsible for cutting down the cables. The result of this thesis will avoid unexpected outcomes during the demolition processes and prevent risk of collapsing of the mast over near by structures. KW - Abbruch KW - Finite-Elemente-Methode KW - Optimierung KW - Demolition KW - Guyed antenna masts KW - Explicit finite element method KW - Optimization Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210723-44609 ER - TY - THES A1 - Udrea, Mihai-Andrei T1 - Assessment of Data from Dynamic Bridge Monitoring N2 - The focus of the thesis is to process measurements acquired from a continuous monitoring system at a railway bridge. Temperature, strain and ambient vibration records are analysed and two main directions of investigation are pursued. The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is studied and correlated to environmental and operational factors. The second aspect deals with the structural response to passing trains. Corresponding triggered records of strain and temperature are processed and their assessment is accomplished using the average strains induced by each train as the reference parameter. Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out. KW - automatic modal analysis KW - stochastic subspace identification KW - modal tracking KW - modal parameter estimation KW - clustering KW - Messtechnik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140429-21742 ER - TY - THES A1 - Gollos, Carolin T1 - Optimierung der Baustellenlogistik für die Ausbauphase eines Großprojektes N2 - Baulogistische Vorgänge sind in einer modern angelegten Baustelle der Schlüssel zu einer wirtschaftlichen Abwicklung. Dieses gilt nicht nur für den Rohbau, bei dem die sehr enge Verzahnung zwischen den Fertigungs- und Logistikprozessen auf der Baustelle zu beobachten ist, sondern noch mehr für die Ausbauphase, bei der vermeintlich unabhängig voneinander agierende Einzelunternehmen des Ausbaus auf engem Raum miteinander um die jeweils besten Liefer- und Montagebedingungen konkurrieren. Ausgehend von einer aktuellen Großbaustelle in Jena werden verschiedene Varianten einer leistungsfähigen Baulogistik entwickelt und deren Implementierung auf der Baustelle vorbereitet werden. KW - Baulogistik KW - Ausbau KW - Großbaustelle Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140901-22858 ER - TY - THES A1 - Kavrakov, Igor T1 - Structural Optimization of Composite Cross-Sections and Elements using Energy Methods N2 - Structural optimization has gained considerable attention in the design of structural engineering structures, especially in the preliminary phase. This study introduces an unconventional approach for structural optimization by utilizing the Energy method with Integral Material Behavior (EIM), based on the Lagrange’s principle of minimum potential energy. An automated two-level optimization search process is proposed, which integrates the EIM, as an alternative method for nonlinear structural analysis, and the bilevel optimization. The proposed procedure secures the equilibrium through minimizing the potential energy on one level, and on a higher level, a design objective function. For this, the most robust strategy of bilevel optimization, the nested method is used. The function of the potential energy is investigated along with its instabilities for physical nonlinear analysis through principle examples, by which the advantages and limitations using this method are reviewed. Furthermore, optimization algorithms are discussed. A numerical fully functional code is developed for nonlinear cross section, element and 2D frame analysis, utilizing different finite elements and is verified against existing EIM programs. As a proof of concept, the method is applied on selected examples using this code on cross section and element level. For the former one a comparison is made with standard procedure, by employing the equilibrium equations within the constrains. The validation of the element level was proven by a theoretical solution of an arch bridge and finally, a truss bridge is optimized. Most of the principle examples are chosen to be adequate for the everyday engineering practice, to demonstrate the effectiveness of the proposed method. This study implies that with further development, this method could become just as competitive as the conventional structural optimization techniques using the Finite Element Method. KW - Strukturoptimierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190815-39593 ER - TY - THES A1 - Jahn, Rosa T1 - Evaluation von Nutzerbedürfnissen in Wohngebäuden unter Berücksichtigung hygrothermischer Messdaten N2 - Evaluation von Nutzerbedürfnissen in Wohngebäuden unter Berücksichtigung hygrothermischer Messdaten KW - Raumklima KW - Bauphysik KW - Umfrage Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130320-18758 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Gaberdan, Elisa T1 - Konzeption und prototypische Implementierung von Simulationsszenarien des Regenwassermanagements zur Entscheidungsunterstützung mit Hilfe von SimCity N2 - Für anwendungsbezogene Lösungsansätze im Bereich der Siedlungswasserwirtschaft im urbanen Raum ist es wichtig, die Inhalte komplexer ineinander greifender Systeme zu begreifen. Ein Simulationsspiel kann hilfreich sein, um den Nutzer mit neuen Technologien und Möglichkeiten der Kombination vertraut zu machen. Aufgrund hoher Anforderungen an Komplexität und Detailliertheit der Modelle ist die Entwicklung eines solchen Spiels teuer und aufwändig. Diese Arbeit untersucht, inwieweit sich das kommerziell zu Unterhaltungszwecken entwickelte Spiel SimCity 5 (Version 2013) nutzen lässt bzw. wie es konfiguriert werden muss. Im Speziellen wird dies am Beispiel des naturnahen Regenwassermanagements im urbanen Raum erläutert. Die Analyse von SimCity 5 zeigt, dass sich das Spiel durchaus als Werkzeug zur Entscheidungsunterstützung eignet. Die Teilsysteme der Siedlungswasserwirtschaft sind jedoch zu stark vereinfacht, sodass Verbesserungsbedarf besteht. Um Szenarien des naturnahen Regenwassermanagements in das Spiel zu integrieren, wurde im Rahmen der Arbeit das Modell SimRegen entwickelt. Da derzeit keine Schnittstelle zur agentenbasierten Simulationsengine GlassBox freigegeben ist, wurden Teilaspekte des Modells mit Hilfe des agentenbasierten Simulationswerkzeugs NetLogo (Version 5.0.4) implementiert. KW - Regenwassermanagement KW - Simulationsspiel KW - Simulationsszenario KW - SimCity Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131104-20700 ER - TY - THES A1 - Herrmann, Annemarie T1 - Investigation of buckling behavior of carbon fiber-reinforced composite shell structures with openings N2 - Thin-walled cylindrical composite shell structures are often applied in aerospace for lighter and cheaper launcher transport system. These structures exhibit sensitivity to geometrical imperfection and are prone to buckling under axial compression. Today the design is based on NASA guidelines from the 1960’s [1] using a conservative lower bound curve embodying many experimental results of that time. It is well known that the advantages and different characteristics of composites as well as the evolution of manufacturing standards are not considered apporopriately in this outdated approach. The DESICOS project was initiated to provide new design guidelines regarding all the advantages of composites and allow further weight reduction of space structures by guaranteeing a more precise and robust design. Therefore it is necessary among other things to understand how a cutout with different dimensions affects the buckling load of a thin-walled cylindrical shell structure in combination with initial geometric imperfections. This work is intended to identify a ratio between the cutout characteristic dimension (in this case the cutout diameter) and the structure characteristic dimension (in this case the cylinder radius) that can be used to tell if the buckling structure is dominated by initial imperfections or is dominated by the cutout. KW - buckling KW - composite KW - Abaqus KW - cylindrical shell structures Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130107-18129 UR - www.desicos.eu ER - TY - THES A1 - Esser, Julia T1 - Analyse von Einflussparametern auf bogenförmige überschnittene Bohrpfahlwände mit mehreren unbewehrten Zwischenpfählen N2 - wasserdichte Baugrubenumschließungen tiefer Baugruben mittels bogenförmiger, überschnittener Bohrpfahlwände KW - überschnittene Bohrpfahlwand KW - bogenförmig KW - bogenförmig KW - überschnittene Bohrpfahlwand KW - 56 Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120203-15416 ER - TY - THES A1 - Küster, Felix Pascal T1 - Helsinki Central N2 - Als zentraler Ort und Eingangstor in die finnische Hauptstadt bietet der Bereich um den Bahnhof, in dem sich das Baufeld befindet zu wenig räumliche Qualitäten und bildet gleichzeitig eine Barriere zwischen dem historischen Stadtkern und dem politischen und kulturellem Zentrum der Stadt. Der historische Bahnhof aus der Epoche des Jugendstils ist momentan eingeschlossen von einer hochfrequentierten Straße im Süden und den flankierenden Stationen des Busbahnhofs an der Ost- und Westseite. Die fußläufigen Verbindungen in die Altstadt sind gestört und das Regierungsviertel mit dem Reichstagsgebäude werden links liegen gelassen. Eine Orientierung als Neuankömmling ist schwer möglich. Darüber hinaus kommt etwa die Hälfte der Züge, vor allem die Regionalzüge nicht in der Bahnhofshalle des Kopfbahnhofes an, weil die Begrenzung durch die Seitenflügel nur eine Erweiterung des Bahnhofs nach Norden hin zuließ. Entstanden ist ein Entwurf der versucht, dem gesamten Bereich um den Bahnhof ein neues Gesicht zu geben und eine Verbesserung auf unterschiedlichen Ebenen zu erreichen. Er bündelt zum einen die verschiedenen Verkehrsströme und stellt eine bisher unterbrochene Querverbindung zwischen den benachbarten Stadtvierteln entlang des Bahnhofsareals her. Zum anderen trägt er dem Erfordernis nach einem städtebaulichen Gegenüber für das Regierungsgebäude Rechnung, welches damit in den Verbund der kulturellen Einrichtungen auf dem Töölönlahti Gelände aufgenommen wird. Darüber hinaus belebt er eine Besonderheit von Helsinki. Zu Beginn des 20. Jahrhunderts bestand die Notwendigkeit den Hafen an das Schienennetz anzubinden. Da der Stadtkern bereits sehr dicht bebaut war, wurde ein Eisenbahnring entlang der Küste, einmal um das Stadtzentrum herum gebaut. Seitdem die Verbindung stillgelegt wurde liegt dieser Ring brach, was nun die große Chance bietet, eine kreuzungsfreien Rad- und Fußweg zu etablieren, der durch den Entwurf eines Mobilityhubs geschlossen würde. In der vorliegenden Broschüre werden die städtebaulichen Rahmenbedingungen, die Analyse der gegenwärtigen Situation und der eigentliche Entwurfsprozess, der zu dieser Lösung führte dokumentiert. KW - Weimar / Bauhaus-Universität Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120807-16867 ER - TY - THES A1 - Klima, Sebastian T1 - Anwendungsmöglichkeiten der Werkzeuge der Lean Construction in der Ablaufplanung im Fassadenbau N2 - Trotz Mechanisierung und Vorfertigung ist die Bauproduktion stark handwerklich geprägt. Zu dem sind Baustellen in der Regel komplexe und einmalige Produktionsstätten für Einzelobjekte. Sie sind häufig witterungsabhängig, was die Planbarkeit des Herstellungsprozesses beeinträchtigt. Zu dem unterscheiden sich die jeweiligen örtlichen Bedingungen stark voneinander. Ständig wechselndes Personal und Nachunternehmer aus verschiedenen Ländern mit unter-schiedlichen Erfahrungen und Qualifikationen sowie andere Geräte, Herstellungsmethoden und Baustoffe stellen sehr komplexe Anforderungen an die Baubeteiligten. Außerdem gelten in Deutschland hohe Qualitätsanforderungen und komplizierte Vorschriften, die den Aufwand für die Bauleitung deutlich erhöhen. Die Bauindustrie hat sich aus der Kombination verschiedener Berufe entwickelt und leidet deshalb bis heute unter einer arbeitsteiligen Gliederung. Dies hat zur Folge, dass gegenwärtige Ressourcen nur mangelhaft ausgenutzt werden. Besonders bei den Schnittstellen zwischen den einzelnen Gewerken besteht enormes Potential, da die Abläufe und Übergänge zwischen den einzelnen Gewerken meist nicht richtig funktionieren. Hinzu kommen Lieferprobleme sowie zum Teil gegensätzliche Ziele der am Bau Beteiligten, welche die Arbeit erschweren und das Resultat beeinträchtigen. Dies hat zur Folge, dass die tatsächliche, produktive Arbeitsleistung im Verhältnis zur gesamten Arbeitszeit zu gering ausfällt. Seit Mitte der neunziger Jahre versuchen, vor allem amerikanische Bauingenieure und Ma-nagementfachleute, wissenschaftlich einzelne Gestaltungsprinzipien und Methoden der Lean Production (LP) aus der stationären Industrie auf das Bauwesen zu übertragen und bran-chenspezifisch weiterzuentwickeln. Dabei werden hauptsächlich Werkzeuge und Methoden des Toyota Produktionssystems (TPS) und der LP verwendet um eine Steigerung der Produktivität und Stabilisierung der Bauabläufe zu erreichen. Dieser Managementansatz zur Gestaltung der Baustellenproduktion wird als Lean Construction (LC) bezeichnet. KW - Ablaufplanung KW - Lean Production Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110816-15531 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Kraus, Michael T1 - Einfluss von Leistungs-Ultraschall auf die Fließeigenschaften und frühe Hydratation von Portland-Zementleim T1 - Influence of power-ultrasound of flowability and early hydration of OPC-suspensions N2 - Die Verbesserung der Verarbeitbarkeitseigenschaften zementgebundener Systeme ist eines der wichtigsten Ziele der Baustoffforschung. In dieser Diplomarbeit werden die Ergebnisse von Grundlagenuntersuchungen dokumentiert wie durch den Einfluss von Leistungs-Ultraschall in frisch hergestellten Portland-Zementleim eine Vielzahl der verarbeitungstechnisch relevanten Faktoren wie Luftgehalt, Fließfähigkeit oder Erstarrungsverhalten positiv beeinflusst werden können. Darüber hinaus werden Möglichkeiten aufgezeigt wie durch eine Beschallung der Bindemittelsuspension verflüssigende Zusatzmittel in signifikanten Mengen eingespart und die Pumpbarkeit von Hochleistungsbeton deutlich verbessert werden können. N2 - To improve the workability of cementitious systems is one of the main aims of building materials science. The thesis is documenting results of a research program. This research is dealing with the effect of power-ultrasound on properties such as air content, flowability and setting behaviour of fresh OPC-suspensions. Furthermore, possibilities are highlighted that power-ultrasound is an effective method to reduce super plasticizer content in cement suspensions and improves the pumpability of high performance concrete. KW - Rheologie KW - Fließverhalten KW - Hydratation KW - Verarbeitungseigenschaft KW - Zementleim KW - Leistungs-Ultraschall KW - power-ultrasound KW - cement paste KW - early hydration KW - microstructure KW - rheology KW - workability Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111115-15654 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Rahm, Tobias T1 - Simulation von Kernprozessen eines Erddruckschildes T1 - Process simulation of an Earth Pressure Balanced Shield Machine N2 - In dieser Arbeit wird der Vortriebsprozess einer Erddruckschildmaschine in einem Simulationsmodell mit Hilfe der System Dynamics modelliert. Nach einer Einführung in den maschinellen Tunnelbau werden die Besonderheiten der Erddruckschildmaschine herausgestellt. Anschließend wird das betrachtete System mit dem Simulationskonzept der System Dynamics modelliert und in einem geeigneten Simulationstool implementiert. N2 - Within this paper the heading of an Earth Pressure Balanced Shield Machine is modelled with the help of System Dynamics. The first chapter gives a short introduction to mechanized tunnelling. Then the characteristics of the Earth Pressure Balanced Shield Machine are discussed in more detail. After that, the system is modelled with the concept of System Dynamics and finally implemented in a simulation tool. KW - Simulation KW - Kontinuierliche Simulation KW - Computersimulation KW - System Dynamics KW - Modellierung KW - Tunnelbau KW - Schildmaschinen KW - Erddruckschildmaschine KW - Earth Pressure Balanced Shield Machine Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110909-15599 ER - TY - THES A1 - Schuster, Siegbert A1 - Schuster, Karl-Heinz T1 - Hygrothermische Gebäudesimulation – Experimentelle Bestimmung der Randparameter und Sorptionseigenschaften von historischen Räumen N2 - Forscher prognostizieren in den kommenden Jahren eine Klimaerwärmung bis zu 6 ° C. Aus diesem Grund wurde das EU – Forschungsprojekt „ Climate for Culture“ ins Leben gerufen, um Auswirkungen dieses Klimawandels auf denkmalgeschützte, kulturhistorische Gebäude zu untersuchen. Ziel ist es, entsprechende Schutzmaßnahmen in konservatorischer Hinsicht zu erarbeiten. Aufgrund des Zusammenhanges zwischen Temperatur und Luftfeuchte führt diese Klimaerwärmung auch zu einer Änderung des Feuchtehaushaltes im Außenbereich und, bedingt durch einen immer vorhandenen Luftwechsel, schließlich auch im Innenbereich von Gebäuden. Die Fähigkeit eines Gebäudes, durch seine Beschaffenheit auf Feuchteeinflüsse zu reagieren, wird maßgeblich bestimmt durch seine Möglichkeit, in der Gebäudehülle und der vorhandenen Einrichtung anfallende Feuchte zwischenzuspeichern und diese zeitversetzt wieder an die Umgebung abzugeben. Diese Fähigkeit sorptiver Flächen zur Feuchtepufferung konnte bislang nur mit erheblichem Aufwand ermittelt werden. In der vorliegenden Arbeit wird versucht, durch einfachere Methoden mittels hygrothermischer Simulation einen „Zweizahlwert“ zu erhalten, mit dem sich diese Raumkompetenz schnell und nachvollziehbar darstellen lässt. KW - Feuchtepufferung Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131219-20936 ER - TY - THES A1 - Cicek, Burhan A1 - Cancino, Pamela T1 - Küreken 2013. Entwerfen eines Dorfes aus Lehm N2 - Die Diskussionen in der Politik und in der Gesellschaft über Klimawandel, globale Erwärmung oder Nachhaltigkeit, die schon noch länger anhält, werden nie ein Ende finden, solange die Probleme, auf denen sie basiert, unlösbar bleiben. Vorgeschlagene Lösungen werden meist nicht richtig umgesetzt. Im Zusammenhang mit dieser Problematik steigt aber das Verantwortungsgefühl für bessere Zukunftsstrategien immer mehr. Die in den letzten Jahren vorgekommenen Umweltkatastrophen, wie im Golf von Mexiko (April 2010) oder im Fukushima (März 2011) die noch aktuell sind, zeigen, dass der Primärenergieeinsatz oder die Transportproblematik nicht mehr nur die Sorge der Entwicklungsländer, sondern auch der Industrieländer ist. Die Bauwelt mit ihrem erheblichen Energiebedarf spielt bei der Festlegung der Zukunftsstrategien eine große Rolle. Vor allem sind die Forschungen nach umweltfreundlichen Materialien, der Recyclebarkeit der eingesetzten Baumaterialien oder dem vernünftigen Nutzen der Naturressourcen die wichtigsten Schwerpunkte. In dieser Hinsicht bringt Lehm als Baumaterial viele Vorteile mit sich. Bei einem Artikel sagt der Lehmbauexperte Martin Rauch: “In heutiger Zeit und einem Kulturkreis, in dem Baugrund und Arbeitszeit unsere großen Kosten verursachen, findet der tradierte Lehmbau mit dem verbundenen großen Aufwand an menschlicher Arbeitszeit nur schwer seinen Platz. Über die Art der Bauweise wird auch die Entscheidung gefällt, wie und wo die Wertschöpfung erfolgt und ob der Einsatz des Budgets einen gesellschaftlichen Nutzen mit sich bringt. Im Vergleich zu einem Sichtbetonhaus können bei einem Stampflehmhaus 40% der Primärenergie ein gespart und dafür mehr lokale Arbeitsressourcen gebunden werden. Davon profitieren vor allem die lokalen Handwerker und mittelständischen Betriebe” Anatolien ist der Ort, wo man immer noch die tiefsten Wurzeln der Baukultur menschlicher Geschichte findet. Diese Baukultur, die in den vergangenen Jahrzehnten fast verlorengegangen ist, ist die Lehmbaukultur. In dieser Hinsicht beabsichtigt dieser Entwurf die Würde des Lehms in Anatolien wieder herzustellen und dadurch dessen Glaubwürdigkeit zurückzubringen. KW - Lehm KW - Lehmbau KW - stabilisierter Lehm KW - Stampflehm KW - Alker Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-63568 ER - TY - THES A1 - Schreiber, Thomas T1 - Vergleichende Analyse zur Ermittlung der Potenzialverteilung beim Nachweis des Hydraulischen Grundbruchs in tiefen Baugruben N2 - Die vorliegende Arbeit beschäftigt sich mit der vergleichenden Analyse unterschiedlicher Berechnungsansätze zum hydraulischen Grundbruch. Diese wurden zunächst analysiert, an Beispielberechnungen angewandt und schließlich miteinander verglichen. Weiterhin wurde der Einfluss verschiedener Randbedingungen, allem voran der Baugrubenbreite, auf die Sicherheit gegen einen hydraulischen Grundbruch untersucht. Es werden Empfehlungen zur Anwendbarkeit verschiedener Näherungsansätze bei Vorhandensein bestimmter Einflussfaktoren gegeben. KW - Hydraulischer Grundbruch KW - Baugrube KW - Terzaghi KW - Karl KW - Standsicherheit KW - Tiefe Baugruben Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100929-15216 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER -