TY - CHAP A1 - Haiven, Max A1 - Thornton, Cassie T1 - Über die University of the Phoenix T2 - Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch N2 - Wir haben die folgenden 13 Protokolle als Methodik entwickelt, die als Orientierungshilfe bei der Entstehung unserer Workshops und Interventionen dient. KW - Kunst KW - Universität KW - Künstlerischer Aktivismus Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42640 UR - https://nocturne-plattform.de/text/uber-die-university-of-the-phoenix SP - 271 EP - 288 PB - Nocturne CY - Berlin und Weimar ER - TY - THES A1 - Reformat, Martin T1 - Zementmahlung - Untersuchungen zum Zusammenhang von Mahlaggregat und Materialeigenschaften N2 - Die Mahlung als Zerkleinerungsprozess stellt seit den Anfängen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, über das Aufschließen von Heilkräutern in Mörsern bis hin zur Herstellung von Tonern für Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein ökologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden für Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben rückt. Die Komplexität der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit“ ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ansätzen gefertigt. Darüber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsfähige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erfüllt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei übergeordnete Teile: Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und Hüttensand angestellt. Um eine möglichst effektive Mahlung von Zement und Kompositmaterialien zu gewährleisten, ist es wichtig, die Auswirkung von Mühlenparametern zu kennen. Hierfür wurde eine umfangreiche Versuchsmatrix aufgestellt und abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlkörpermühlen und mahlkörperlosen Mühlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengefüge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker führten ungünstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementprüfungen. Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und Rührwerkskugelmühle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker und konventionellen Kompositmaterialien wie Hüttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zusätzliche Reaktivität bei gleicher Granulometrie gegenüber der herkömmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem Hüttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberflächenvergrößerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erhöhung der Reaktivität zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberflächendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivitätsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgeführt. Im Speziellen wurde untersucht, inwieweit eine Rückführung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf möglich ist. Die hierfür verwendete Mahltechnik umfasst sowohl konventionelle Mühlen als auch Hochenergiemühlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualität wurde der sogenannte „Aktivierungskoeffizient“ eingeführt. Es stellte sich heraus, dass die Rückführung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abhängt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegenüber dem mit Gesteinskörnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationswärmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen Mühlen aufbereitet. Die hier erzielten Ergebnisse können teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend. N2 - Grinding as a comminution process has been one of the most important forms of processing of all kinds of materials since the beginning of mankind - from grain grinding over digesting medicinal herbs in mortars to producing toners for printers and copiers. Cement grinding in particular is both an economic and an ecological factor in modern societies. More than two-thirds of the electrical energy of cement production is consumed for raw meal and clinker or composite material grinding. This is just one reason why the milling process is increasingly becoming the focus of many research and development projects. And the complexity of cement grinding is increasing. The simple demand to grind to a certain cement fineness is obsolete. Cements are custom-made with a variety of combination products, comminuted separately or together in different grinding units or made with completely new approaches. In addition, the sector of building materials recycling - with all the associated challenges - also wins more and more importance. In terms of the question of how the grinding process could produce high-performance products on the one hand and the increasing demands on sustainability on the other hand, the grinding devices are the focus of the considerations. Accordingly, in addition to an in-depth literature review on the state of knowledge, the present work is divided into two major parts: In the first part investigations are made on conventional grinding devices with core products used in the cement industry, such as Portland cement clinker, limestone, fly ash and granulated blast furnace slag. To ensure the most effective grinding of cement and composite materials, it is important to know the effect of grinding parameters. For this, an extensive experimental matrix was set up and processed. The spectrum of analysis methods was also extensive and was applied to both the milled materials and the cements and concretes made from them. It could be shown that especially the distinction between grinding media mills and non-grinding media mills has a decisive influence on the granulometry and thus also on the cement performance. The processing properties, especially the water demand and thus the pore structure and finally compressive strength and durability properties of the concretes made from these cements, have been strong influenced, particularly. In studies on the common grinding of limestone and clinker an unfavorable enrichment of easily grindable limestone and clayey secondary constituents led to a poorer performance in all cement tests. The second part is devoted to high-energy milling. The technology behind it has been used for decades in other sectors of the economy, such as pharmacy, biology and the food industry and has also been used in cement research for some time. As representatives, the planetary and stirred media ball mill may be mentioned here. In addition to basic investigations on cement clinker and conventional composite materials such as blast furnace slag and limestone, the main Portland cement clinker phase alite was also investigated. The high-energy milling of conventional composite materials generated additional reactivity with the same granulometry compared to conventional grinding. This was observed especially on per se reactive Portland cement clinker as well as on latent-hydraulic blast furnace slag. Ground fly ash could be activated only to a small extent. The general influence of surface enlargement, structural defects and relaxation effects of a ground product were thoroughly investigated and weighted as well. The high-energy milling results of alite showed that the structural defects introduced by milling result in an increased reactivity. It was found that mainly surface defects, structural (volume) defects and as counterpart self-healing effects are the factors determining reactivity. Furthermore, attempts were made to grind concrete waste sand (CDW). In particular, it was examined to what extent a return of CDW, as an unvaluable part of the concrete fracture, in the form of a cement composite material in the building material cycle is possible. The grinding technique used for this purpose includes both conventional mills and high-energy mills. Composite cements with a varied proportion of recycled material were produced and examined for their fundamental properties. For the evaluation of the product quality the so-called äctivation coefficient"was introduced. It was found that the return of used concrete crushed sand as a potential composite significantly depends on the content of the cement paste. For example, pure cement paste as a milled composite showed better performance than the aggregated contaminated CDW. Based on the measured heat of hydration and compressive strengths, the activation coefficient decreased with decreasing degree of abstraction and the activation coefficient also decreased with increasing degree of substitution. For comparison, the same materials were prepared in conventional mills. The results obtained here can be partly considered as equivalent to high-energy milling. Consequently, when activating recycled materials, the grinding technique is less important than the amount of activatable cement paste. KW - Zement KW - Beton KW - Mahlung KW - Zementmahlung KW - Mahlaggregat KW - Vertical roller mill Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201102-42794 SN - 978-3-00-067121-0 ER - TY - GEN A1 - Vollmer, Lisa A1 - Michel, Boris T1 - Wohnen in der Klimakrise. Die Wohnungsfrage als ökologische Frage: Aufruf zur Debatte T2 - s u b \ u r b a n. zeitschrift für kritische stadtforschung N2 - Die Verbindung der sozialen und der ökologischen Frage ist eine der zentralen Herausforderungen linker Politik und kritisch-engagierter Wissenschaft heute. Dafür, wie wenig das bisher gelingt, sind die öffentlichen und wissenschaftlichen Diskussionen um die Wohnungsfrage gute Beispiele. Dieser Aufruf ist eine Einladung an den kollektiven Wissensschatz aus Wissenschaft und Aktivismus, die unterschiedlichen Aspekte der ökologischen Wohnungsfrage, die bisher stark fragmentiert behandelt werden, in einzelnen Beiträgen weiter auszuführen und auf ihren strukturellen Zusammenhang mit der sozialen Wohnungsfrage hin zu beleuchten. KW - Wohnen KW - Wohnungspolitik KW - Wohnungsfrage KW - Klimapolitik KW - Soziale Sicherheit KW - Protestbewegung KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43327 UR - https://zeitschrift-suburban.de/sys/index.php/suburban/article/view/552 VL - 2020 IS - Band 8, Heft 1/2 SP - 163 EP - 166 PB - Sub\urban e.V. CY - Leipzig ER - TY - CHAP A1 - Emerson, Jill A1 - Egert, Gerko T1 - wie den sozialen Muskel trainieren T2 - Experimente lernen, techniken tauschen. Ein experimentelles Handbuch N2 - Interview zum Social Muskel Club und dem "Geben und nehmen Spiel" KW - Gabe KW - Club KW - Netzwerk KW - Sozialer Muskel Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201009-42586 UR - https://nocturne-plattform.de/text/wie-den-sozialen-muskel-trainieren SP - 71 EP - 89 PB - Nocturne CY - Berlin/Weimar ER - TY - THES A1 - Mendonça de Almeida, Karina T1 - Why isn't Google welcome in Kreuzberg? Social movement and the effects of Internet on urban space N2 - Advances in information and communication technologies such as the Internet have driven a great transformation in the interactions between individuals and the urban environment. As the use of the Internet in cities becomes more intense and diverse, there is also a restructuring of urban space, which is experienced by groups in society in various ways, according to the specificity of each context. Accordingly, large Internet companies have emerged as new players in the processes of urbanization, either through partnerships with the public administration or through various services offered directly to urban residents. Once these corporations are key actors in the digitalization of urban services, their operations can affect the patterns of urban inequality and generate a series of new struggles over the production of space. Interested in analyzing this phenomena from the perspective of civil society, the present Master Thesis examined a social movement that prevented Google to settle a new startup campus in the district of Kreuzberg, in Berlin. By asking why Google was not welcome in that context, this study also sought to understand how internet, as well as its main operators, has affected everyday life in the city. Thus, besides analyzing the movement, I investigated the particularities of the urban context where it arose and the elements that distinguish the mobilization’s opponent. In pursuit of an interdisciplinary approach, I analyzed and discussed the results of empirical research in dialogue with critical theories in the fields of urban studies and the Internet, with emphasis on Castells' definitions of urban social movements and network society (1983, 2009, 2015), Couldry's and Mejias' (2019) idea of data colonialism, Lefèbvre's (1991, 1996) concepts of abstract space and the right to the city, as well as Zuboff's (2019) theory of surveillance capitalism. The case at hand has exposed that Google plays a prominent role in the way the Internet has been developed and deployed in cities. From the perspective accessed, the current appropriation of Internet technologies has been detrimental to individual autonomy and has contributed to intensifying existing inequalities in the city. The alternative vision to this relies mainly on the promotion of decentralized solidarity networks. KW - Soziale Bewegung KW - Internet KW - Stadt KW - Social movement KW - urban space KW - Internet KW - tech company KW - Berlin Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200924-42446 ER - TY - THES A1 - Pessoa, Suelen T1 - Why do the Archives archive? A journey from the hunko to the counter-ethnography and back N2 - A complex artistic research on the theme of cultural heritage and (neo)colonial processes of material and immaterial expropriation. Starting from the encounter with a phonographic relic at the Berliner Phonogramm-Archiv, the artist embarks on a journey to her own roots embodied in the practice of the Afro-Brazilian religion Candomblé. In the form of a theoretical treatise, an archive (photos, diagrams, maps, newspaper clippings, letters, documents), as well as a sound performance in the public space of the city of Weimar, several theoretical and performative elements are brought together in this transmedia artistic research that proposes a true decolonial practice. KW - Künstlerische Forschung KW - Museumskunde KW - Ethnologie KW - Candomblé KW - Brasilien KW - decolonisation KW - memoy KW - museum KW - visual arts KW - artistic research KW - Artistic Research KW - Museology KW - Counter-ethnography KW - Brazil Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210112-43280 ER - TY - JOUR A1 - Buschow, Christopher T1 - Why Do Digital Native News Media Fail? An Investigation of Failure in the Early Start-Up Phase JF - Media and Communication N2 - Digital native news media have great potential for improving journalism. Theoretically, they can be the sites where new products, novel revenue streams and alternative ways of organizing digital journalism are discovered, tested, and advanced. In practice, however, the situation appears to be more complicated. Besides the normal pressures facing new businesses, entrepreneurs in digital news are faced with specific challenges. Against the background of general and journalism specific entrepreneurship literature, and in light of a practice–theoretical approach, this qualitative case study research on 15 German digital native news media outlets empirically investigates what barriers curb their innovative capacity in the early start-up phase. In the new media organizations under study here, there are—among other problems—a high degree of homogeneity within founding teams, tensions between journalistic and economic practices, insufficient user orientation, as well as a tendency for organizations to be underfinanced. The patterns of failure investigated in this study can raise awareness, help news start-ups avoid common mistakes before actually entering the market, and help industry experts and investors to realistically estimate the potential of new ventures within the digital news industry. KW - Journalismus KW - Digitalisierung KW - Neue Medien KW - Entrepreneurship KW - digital-born news media KW - digital native news media KW - entrepreneurial journalism KW - news start-ups KW - practice theories KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200417-41347 UR - https://www.cogitatiopress.com/mediaandcommunication/article/view/2677 VL - 2020 IS - Volume 8, Issue 2 SP - 51 EP - 61 PB - Cogitatio Press CY - Lissabon ER - TY - CHAP A1 - Rinsdorf, Lars A1 - Buschow, Christopher ED - Wellbrock, Christian ED - Zabel, Christian T1 - Validität durch Agilität: Methodische Implikationen einerpraxistheoretisch fundierten Medieninnovationsforschung T2 - Innovation in der Medienproduktion und -distribution - Proceedings der Jahrestagung der Fachgruppe Medienökonomie der DGPUK 2019, Köln N2 - Das Innovationsmanagement von Medienorganisationen unterliegt derzeit erheblichen Veränderungen: Im veränderten Marktumfeld erweisen sich Flexibilität, schnelle Richtungswechsel und Anpassungsfähigkeit als zentral. Darauf muss auch die Medienmanagement-Forschung reagieren: Um die Agilität der gegenwärtigen Unternehmenspraxis valide zu erforschen, ist eine ebenso agile, adaptive Forschung gefordert. Zu diesem Zweck schlägt der Beitrag eine praxistheoretische Perspektive auf das Innovationsmanagement von Medienorganisationen vor. Empirische Forschungsdesigns, die aus einem solchen Zugriff resultieren, werden sowohl hinsichtlich ihrer methodischen Herausforderungen als auch ihres Forschungsprojektmanagements diskutiert. Der Beitrag greift außerdem neue Möglichkeitsräume des wissenschaftlichen Publizierens, des Universitätsmanagements sowie der Forschungsorganisation auf, die praxistheoretisch gegründete, empirische Innovationsforschung in der Medienwirtschaft einfordert. KW - Medienökonomie KW - Medientechnik KW - Innovationsforschung KW - Methodologie KW - Projektmanagement KW - Medienwirtschaft Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200630-41874 UR - https://www.ssoar.info/ssoar/handle/document/68090# PB - SSOAR - Social Science Open Access Repository CY - Stuttgart ER - TY - THES A1 - Javanmardi, Leila T1 - URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979 N2 - The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universität Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio‐political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects. KW - Stadtplanung KW - Modernisierung KW - Autokratie KW - Segregation KW - Iran KW - Pahlavi KW - Tehran KW - Dictatorship KW - Urban Planning KW - Modernization Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220224-45971 ER - TY - INPR A1 - Vogel, Albert A1 - Benz, Alexander A1 - Völker, Conrad T1 - Untersuchung des Wärmeübergangs von zyklisch beanspruchten Betonzylindern N2 - Wiederkehrende Belastungen, wie sie beispielsweise an Brücken oder Windenergieanlagen auftreten, können innerhalb der Nutzungsdauer solcher Bauwerke bis zu 1.000.000.000 Lastwechsel erreichen. Um das dadurch eintretende Ermüdungsverhalten von Beton zu untersuchen, werden diese zyklischen Beanspruchungen in mechanischen Versuchen mit Prüfzylindern nachgestellt. Damit Versuche mit solch hohen Lastwechselzahlen in akzeptablen Zeitdauern durchgeführt werden können, wird die Belastungsfrequenz erhöht. Als Folge dieser erhöhten Belas-tungsfrequenz erwärmen sich allerdings die Betonprobekörper, was zu einem früheren, unrealistischen Versagenszeitpunkt führen kann, weshalb die Erwärmung begrenzt werden muss. Um die Wärmefreisetzung in der Probe zu untersuchen, wurden Versuche und Simulationen durchgeführt. Im Beitrag wird die analytische und messtechnische Analyse des Wärmeübergangs an erwärmten Betonzylindern vorgestellt. Resultierend daraus wird eine Möglichkeit zur Reduktion der Erwärmung an zyklisch beanspruchten Betonzylindern vorgestellt. N2 - Periodic load cycles, such as those that occur on bridges or wind turbines, are of great importance for dynamic long-term considerations of concrete. Within the life span of such structures, up to 1,000,000,000 load changes can be expected. To determine the fatigue strength, the resistance to periodic loads can be determined in a short time in laboratory tests by increasing the load frequency. As a result of this increased load frequency, however, the concrete test specimens heat up, which can lead to an earlier, unrealistic time of failure, which is why the heating must be limited. Therefore, tests and simulations were carried out to investigate the heat release in the sample. In this article, the analytical analysis and measurements of the heat release of heated concrete cylinders are presented. As a conclusion, a possibility of reducing the temperature of dynamically stressed concrete cylinders is introduced. KW - Zyklische Beanspruchung KW - Wärmeübergang KW - Wärmeübergangskoeffizient KW - Dissipation KW - Wärmeübergangskoeffizient an Zylinder KW - heat transfer coefficient for cylinders KW - cyclic load Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200619-41813 N1 - This is the pre-peer reviewed version of the following article: https://onlinelibrary.wiley.com/doi/abs/10.1002/bapi.202000004, which has been published in final form at https://doi.org/10.1002/bapi.202000004 VL - 2020 IS - Volume 42, Issue 3 SP - 131 EP - 138 PB - John Wiley and Sons ER - TY - JOUR A1 - Wolf, Mario A1 - Londong, Jörg T1 - Transformation der Siedlungswasserwirtschaft – Steuerungsmechanismen im Diskurs ressourcenorientierter Systemansätze am Beispiel von Thüringen T1 - Transformation of the wastewater sector – The ability of state level controlling mechanisms to enhance the implementation of resource-oriented sanitation systems JF - Raumforschung und Raumordnung N2 - Neuartige Sanitärsysteme zielen auf eine ressourcenorientierte Verwertung von Abwasser ab. Erreicht werden soll dies durch die separate Erfassung von Abwasserteilströmen. In den Fachöffentlichkeiten der Wasserwirtschaft und Raumplanung werden neuartige Sanitärsysteme als ein geeigneter Ansatz für die zukünftige Sicherung der Abwasserentsorgung in ländlichen Räumen betrachtet. Die Praxistauglichkeit dieser Systeme wurde zwar in Forschungsprojekten nachgewiesen, bisher erschweren jedoch für Abwasserentsorger vielfältige Risiken die Einführung einer ressourcenorientierten Abwasserbewirtschaftung. Ausgehend von einer Untersuchung der Kontexte bei der Umsetzung eines neuartigen Sanitärsystems im ländlichen Raum Thüringens wird in diesem Beitrag der Frage nachgegangen, wie auf Landesebene mit dem abwasserwirtschaftlichen Instrumentarium die Einführung von ressourcenorientierten Systemansätzen unterstützt werden kann. Zentrale Elemente des Beitrags sind die Darstellung der wesentlichen Transformationsrisiken in Bezug auf die Einführung innovativer Lösungsansätze, eine Erläuterung der spezifischen abwasserwirtschaftlichen Instrumente sowie die Darlegung von Steuerungsansätzen,mit denen die Einführung von neuartigen Sanitärsystemen gefördert werden kann. Im Ergebnis wird die Realisierbarkeit von neuartigen Sanitärsystemen durch den strategischen Einsatz des Instrumentariums deutlich, gleichwohl die Wasserwirtschaft durch die Erweiterung der bisherigen Systemgrenzen auf die Kooperation mit anderen Bereichen der Daseinsvorsorge angewiesen ist. N2 - New sanitary systems are an intelligent way to approach wastewater management in the face of demographic and climatic changes. It is also compatible with the emerging paradigm of a resource-oriented management of wastewater. While the general technical applicability of resource-oriented systems has been proven in various projects, the realisation is still on hold. The reasons can be found in several risks for wastewater disposal companies that are linked to the implementation process. Based on an analysis of the general context of an implementation of a new sanitary system in a typical rural area of Eastern Germany, this paper analyses to which extend the implementation of such innovative approaches can be facilitated by the regulation system and which steps need to be taken. According to this aim, risks that can hamper the transformation of the wastewater sector are identified, major administrative controlling mechanisms outlined and depicted in which strategic approach these could be used in order to foster the implementation of resource-oriented sanitary systems. As a result, the feasibility of the implementation of new alternative sanitary systems through the strategic application of the controlling mechanisms is generally proven. However, collaborations of the wastewater sectors with stakeholders of other sectors are required. KW - Raumordnung KW - Abwasserwirtschaft KW - Neuartige Sanitärsysteme KW - Instrument KW - Transformation KW - Siedlungswasserwirtschaft KW - Steuerungsansätze KW - Transformationsrisiken KW - Wastewater manegement KW - Transformation risks KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201022-42731 UR - https://content.sciendo.com/view/journals/rara/78/4/article-p397.xml VL - 2020 IS - Band 78, Heft 4 SP - 397 EP - 411 PB - Sciendo ER - TY - JOUR A1 - Fathi, Sadegh A1 - Sajadzadeh, Hassan A1 - Mohammadi Sheshkal, Faezeh A1 - Aram, Farshid A1 - Pinter, Gergo A1 - Felde, Imre A1 - Mosavi, Amir T1 - The Role of Urban Morphology Design on Enhancing Physical Activity and Public Health JF - International Journal of Environmental Research and Public Health N2 - Along with environmental pollution, urban planning has been connected to public health. The research indicates that the quality of built environments plays an important role in reducing mental disorders and overall health. The structure and shape of the city are considered as one of the factors influencing happiness and health in urban communities and the type of the daily activities of citizens. The aim of this study was to promote physical activity in the main structure of the city via urban design in a way that the main form and morphology of the city can encourage citizens to move around and have physical activity within the city. Functional, physical, cultural-social, and perceptual-visual features are regarded as the most important and effective criteria in increasing physical activities in urban spaces, based on literature review. The environmental quality of urban spaces and their role in the physical activities of citizens in urban spaces were assessed by using the questionnaire tool and analytical network process (ANP) of structural equation modeling. Further, the space syntax method was utilized to evaluate the role of the spatial integration of urban spaces on improving physical activities. Based on the results, consideration of functional diversity, spatial flexibility and integration, security, and the aesthetic and visual quality of urban spaces plays an important role in improving the physical health of citizens in urban spaces. Further, more physical activities, including motivation for walking and the sense of public health and happiness, were observed in the streets having higher linkage and space syntax indexes with their surrounding texture. KW - Morphologie KW - Gesundheitswesen KW - Intelligente Stadt KW - Nachhaltigkeit KW - Gesundheitsinformationssystem KW - urban morphology KW - public health KW - physical activities KW - health KW - public space KW - urban health KW - smart cities KW - sustainability Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200402-41225 UR - https://www.mdpi.com/1660-4601/17/7/2359 VL - 2020 IS - Volume 17, Issue 7, 2359 PB - MDPI CY - Basel ER - TY - THES A1 - Camerin, Federico T1 - THE ROLE OF THE GREAT PROPERTY IN THE EUROPEAN CITY-MAKING PROCESS IN THE LAST THIRD OF THE 20th CENTURY. MILITARY PROPERTY AS REFERENCE N2 - The thesis concerns a work of urban history intended not to describe the city but rather to interpret it. By doing so, I have interpreted the city by means of the role played by the so-called ‘great property’ in the European city-making process during the last three decades of the 20th century, specifically focused on the concrete case of military properties in Italy. I have also considered the role played by other kinds of great properties, i.e. industries and railway, which previously acted in the production of the built environment in a different way respect to the military one. As all of them have as common denominator the fact of being ‘capital in land’, I analysed great industrial and railway properties in order to extrapolate a methodology which helped me to interpret the relationship between military properties and city-making process in Europe in the late 20th century. I have analysed the relationship between the capital in land and the city-making process on the ground of the understanding the interrelation between the great property, the urban development, and the agents involved in the urban and territorial planning. Here I have showed that urban planning is not the decisive factor influencing the citymaking process, but instead the power held by the capital in land. I have found that is the great property the trigger of the creation of new ‘areas of centrality’ intended as large areas for consumerism. As far as the role played by great property is concerned, I have also discovered that it has evolved over time. Originally, industrial and railway properties have been regenerated into a wide range of new profit-driven spaces; successively, I have found out that most of the regeneration of military premises aimed to materialise areas of centrality. The way of interpreting this factor has been based on focusing my attention on the military premises in Italy: I have classified their typology when they have been built and, most importantly, when they have been regenerated into new areas of centrality. N2 - El trabajo aborda el entendimiento del proceso de construcción de la ciudad europea durante el último tercio del siglo XX, desde el protagonismo y el papel ejercido por la Gran Propiedad, un nuevo concepto elaborado ad hoc dentro del Programa Europeo European Joint Doctorate “urbanHist” en especial, aquella que se identifica con las instalaciones militares en Italia. El intento es esbozar un planteamiento teórico que nos permita un entendimiento de los fenómenos que asisten al proceso de construcción histórico de las ciudades europeas. Bien entendido, que los presupuestos teóricos esbozados se verificarán, en un intento por elaborar una “praxis-teórica”, con ejemplos, casos estudio, extraídos de la realidad construida que identifica a algunas ciudades europeas. T2 - EL PAPEL DE LA GRAN PROPIEDAD EN EL PROCESO DE CONSTRUCCIÓN DE LA CIUDAD EUROPEA DURANTE EL ÚLTIMO TERCIO DEL SIGLO XX. LAS PROPIEDADES MILITARES COMO REFERENTE KW - Stadtplanung KW - Stadtgeschichte KW - Urbanität KW - European city-making process KW - capitalist city KW - urban regeneration KW - urban development KW - urban planning KW - urban history KW - urbanism Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200714-42018 ER - TY - THES A1 - Lee, Sihyo T1 - The making of totalitarian city in Pyongyang: The spatial transition from free to ideology, and for marketization N2 - Space is a social product and a social producer. The main aim of this thesis is to reveal ‘the process of totalitarian city making in Pyongyang’, especially in the light of the interaction between the power and urban space. The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot. After the 1945 independence, Kim’s regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens. After entry to the market, to keep Kim’s controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives’ gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang. This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society. KW - Pyongyang KW - totalitarian city KW - Stadtbild KW - Pyongyang KW - North Korea KW - space of ideology KW - spatial transition KW - ideological space KW - colonialcity KW - socialist city KW - space of terror Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200526-41731 ER - TY - JOUR A1 - Işık, Ercan A1 - Büyüksaraç, Aydın A1 - Levent Ekinci, Yunus A1 - Aydın, Mehmet Cihan A1 - Harirchian, Ehsan T1 - The Effect of Site-Specific Design Spectrum on Earthquake-Building Parameters: A Case Study from the Marmara Region (NW Turkey) JF - Applied Sciences N2 - The Marmara Region (NW Turkey) has experienced significant earthquakes (M > 7.0) to date. A destructive earthquake is also expected in the region. To determine the effect of the specific design spectrum, eleven provinces located in the region were chosen according to the Turkey Earthquake Building Code updated in 2019. Additionally, the differences between the previous and updated regulations of the country were investigated. Peak Ground Acceleration (PGA) and Peak Ground Velocity (PGV) were obtained for each province by using earthquake ground motion levels with 2%, 10%, 50%, and 68% probability of exceedance in 50-year periods. The PGA values in the region range from 0.16 to 0.7 g for earthquakes with a return period of 475 years. For each province, a sample of a reinforced-concrete building having two different numbers of stories with the same ground and structural characteristics was chosen. Static adaptive pushover analyses were performed for the sample reinforced-concrete building using each province’s design spectrum. The variations in the earthquake and structural parameters were investigated according to different geographical locations. It was determined that the site-specific design spectrum significantly influences target displacements for performance-based assessments of buildings due to seismicity characteristics of the studied geographic location. KW - Erdbeben KW - earthquake KW - site-specific spectrum KW - Marmara Region KW - seismic hazard analysis KW - adaptive pushover KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201022-42758 UR - https://www.mdpi.com/2076-3417/10/20/7247 VL - 2020 IS - Volume 10, issue 20, article 7247 PB - MDPI CY - Basel ER - TY - RPRT A1 - Bonhag-De Rosa, Katharina A1 - Boettger, Till A1 - Gynz-Rekowski, Christoph von T1 - The "Stapelhaus": Experimental building project on the campus of the Bauhaus-Universität Weimar N2 - The project is a cooperation between the bauhaus.ifex and MFPA Weimar and is intended to develop step by step as an experimental student village. Special focus is given to sustainability and construction using different building materials. For the construction of the first room module, CemCel was chosen as a new, lightweight and fibre-based building material. KW - Architecture KW - cellulose KW - stacking system KW - papercrete KW - studies in 1:1 scale KW - monolithic KW - cement Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200325-41139 ER - TY - THES A1 - Kavrakov, Igor T1 - Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity N2 - Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles’ strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind–bridge interaction and suggest appropriate modeling strategies for an enhanced design. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 21 KW - Brücke KW - Bridge KW - Computational Fluid Dynamics KW - Aerodynamics KW - Aeroelasticity KW - Category Theory KW - Aerodynamik KW - Aeroelastizität Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200316-41099 UR - https://asw-verlage.de/katalog/?id=2255 SN - 978-3-95773-284-2 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - JOUR A1 - Artus, Mathias A1 - Koch, Christian T1 - State of the art in damage information modeling for RC bridges – A literature review JF - Advanced Engineering Informatics N2 - In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4% and 2% of its construction cost per year over its entire life cycle. This means that up to 80% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed. KW - Building Information Modeling KW - Brücke KW - Inspektion KW - Literaturrecherche KW - Datenmodell Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220506-46390 UR - https://www.sciencedirect.com/science/article/abs/pii/S1474034620301427?via%3Dihub VL - 2020 IS - volume 46, article 101171 SP - 1 EP - 16 PB - Elsevier Science CY - Amsterdam ER - TY - JOUR A1 - Dehghani, Majid A1 - Salehi, Somayeh A1 - Mosavi, Amir A1 - Nabipour, Narjes A1 - Shamshirband, Shahaboddin A1 - Ghamisi, Pedram T1 - Spatial Analysis of Seasonal Precipitation over Iran: Co-Variation with Climate Indices JF - ISPRS, International Journal of Geo-Information N2 - Temporary changes in precipitation may lead to sustained and severe drought or massive floods in different parts of the world. Knowing the variation in precipitation can effectively help the water resources decision-makers in water resources management. Large-scale circulation drivers have a considerable impact on precipitation in different parts of the world. In this research, the impact of El Niño-Southern Oscillation (ENSO), Pacific Decadal Oscillation (PDO), and North Atlantic Oscillation (NAO) on seasonal precipitation over Iran was investigated. For this purpose, 103 synoptic stations with at least 30 years of data were utilized. The Spearman correlation coefficient between the indices in the previous 12 months with seasonal precipitation was calculated, and the meaningful correlations were extracted. Then, the month in which each of these indices has the highest correlation with seasonal precipitation was determined. Finally, the overall amount of increase or decrease in seasonal precipitation due to each of these indices was calculated. Results indicate the Southern Oscillation Index (SOI), NAO, and PDO have the most impact on seasonal precipitation, respectively. Additionally, these indices have the highest impact on the precipitation in winter, autumn, spring, and summer, respectively. SOI has a diverse impact on winter precipitation compared to the PDO and NAO, while in the other seasons, each index has its special impact on seasonal precipitation. Generally, all indices in different phases may decrease the seasonal precipitation up to 100%. However, the seasonal precipitation may increase more than 100% in different seasons due to the impact of these indices. The results of this study can be used effectively in water resources management and especially in dam operation. KW - Maschinelles Lernen KW - Machine learning KW - spatiotemporal database KW - spatial analysis KW - seasonal precipitation KW - spearman correlation coefficient Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200128-40740 UR - https://www.mdpi.com/2220-9964/9/2/73 VL - 2020 IS - Volume 9, Issue 2, 73 PB - MDPI ER - TY - THES A1 - Chan, Chiu Ling T1 - Smooth representation of thin shells and volume structures for isogeometric analysis N2 - The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of “isoparametric”, for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2020,2 KW - Modellierung KW - Isogeometrische Analyse KW - NURBS KW - Geometric Modeling KW - Isogeometric Analysis KW - NURBS Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200812-42083 ER -