TY - CHAP A1 - Eschenbruch, Klaus T1 - Änderungsmanagementsysteme bei komplexen Projekten - Paradigmenwechsel beim Claimmanagement KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8470 ER - TY - INPR A1 - Koch, Florian T1 - Zwischen Transformation und Globalisierung - Immobilienmarkt und Stadtentwicklung in Warschau T1 - Real estate markets and urban development in Warsaw N2 - Nach der politischen Wende Ende der 1980er/Anfang der 1990er Jahre entwickelte sich in Warschau innerhalb kurzer Zeit ein hoch dynamischer Immobilienmarkt kapitalistischer Prägung, dessen Mechanismen grundlegende Auswirkungen auf die Stadtentwicklung Warschaus haben. Im folgenden Aufsatz werden die wesentlichen Eigenschaften des Büro- und Wohnungsmarkts aufgezeigt. Es werden für jeden Sektor die Funktionsweise, die wesentlichen Akteure der Nachfrage- und Angebotsseite, die Rolle der Institutionen und die räumlichen Konsequenzen dargestellt. KW - Immobilienmarkt KW - Warschau KW - Stadtentwicklung KW - Stadtforschung KW - Wohnungsmarkt KW - Transformation KW - Globalisierung Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7952 ER - TY - CHAP A1 - Dzwigon, Wieslaw A1 - Hempel, Lorenz ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ZUR SYNCHRONISATION VON LINIEN IM ÖPNV N2 - Wir betrachten im ÖPNV (Öffentlichen Personennahverkehr) diejenige Situation, daß zwei Bus- oder Straßenbahnlinien gemeinsame Haltestellen haben. Ziel unserer Untersuchungen ist es, für beide Linien einen solchen Fahrplan zu finden, der für die Fahrgäste möglichst viel Bequemlichkeit bietet. Die Bedarfsstruktur - die Anzahl von Personen, die die beiden Linien benutzen - setzt dabei gewisse Beschränkungen für die Taktzeiten der beiden Linien. Die verbleibenden Entscheidungsfreiheiten sollen im Sinne der Zielstellung ausgenutzt werden. Im Vortrag wird folgenden Fragen nachgegangen: - nach welchen Kriterien kann man die "Bequemlichkeit" oder die "Synchonisationsgüte" messen? - wie kann man die einzelnen "Synchronisationsmaße" berechnen ? - wie kann man die verbleibenden Entscheidungsfreiheiten nutzen, um eine möglichst gute Synchronisation zu erreichen ? Die Ergebnisse werden dann auf einige Beispiele angewandt und mit den bereitgestellten Methoden Lösungsvorschläge unterbreitet. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29442 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Genzel, Elke T1 - Zur Geschichte der Konstruktion und der Bemessung von Tragwerken aus faserverstärkten Kunststoffen 1950-1980 T1 - To the history of construction and calculation of load bearing structures from fiber reeinforced plastics in buildings 1950-1980 N2 - Die Arbeit befasst sich mit der Anwendung faserverstärkter Kunststoffe für Tragwerke des Hochbaus. Es wird ein geschichtlicher Überblick über die Jahre 1950 bis 1980 gegeben und dabei herausgestellt, wie es 1. zur Einführung des bis 1950 unbekannten Werkstoffes im Bauwesen kommen konnte 2. welche Personen und Institute maßgeblich an der Einführung und Entwicklung des Bauens mit FVK beteiligt waren 3. welche Tragwerke verwendet wurden 4. wie die Pioniere diese Tragwerke bemaßen 5. welche konstruktiven Besonderheiten sich mit der Verwendung von FVK in der Tragstruktur ergaben Nach einer Einführung werden im Kapitel 2 die wichtigsten Faktoren der Entwicklung von Tragwerken aus GFK erörtert. Im Kapitel 3 wird die Technik der Fertigung von GFK-Teilen und deren Fügung beschrieben. Im Kapitel 4 werden die Tragwerke beschrieben und einzelne Tragwerkstypen eingehend erörtert. Im Kapitel 5 werden die Bemessungskonzepte und deren Entwicklung erörtert. In der Bilanz werden die Faktoren aufgezählt, die zum Abklingen des Bauens mit FVK in der Tragstruktur geführt haben. Die Arbeit wird ergänzt durch eine ca. 40-seitige Tabelle in der die gebauten Tragwerke in Abhängigkeit von den technischen Parametern Spannweiten und Lasten dargestellt werden. Im Anhang werden 10 exemplarische Bauten detailliert erörtert. N2 - The work is concerned with the application of fiber-reinforced plastics for buildings. The text give an historical overview over the years 1950 to 1980 and put out how it could come 1. how could FRP been discovered in the building market 2. which persons and institutes were considerably in the introduction and development of building with FRP involved 3. which construction they used 4. how the pioneers calculate the buildings 5. which constructional characteristics developed. After an introduction become in chapter 2 are the most important factors of the development of bearing structure from GRP discussed. In chapter 3 the technology of the manufacturing of GRP parts and their connecting is described. In chapter 4 the bearing structures are described and individual wing unit types are discussed in detail. In chapter 5 the calculation concepts and their development are discussed. In the balance the factors are enumerated, which were responsible for the end of building with FVK in the structure. The work supplemental by one approx. 40- lateral table in that the built wing units as a function of the technical parameters spans and loads to be represented. In the appendix 10 exemplary buildings are discussed in detail. KW - Tragwerk KW - Kunststofftechnik KW - Kunststoff-Metall-Verbund KW - Kunststoff KW - Kunststoffbauteil KW - Kunststoffherstellung KW - Kunststoffindustrie KW - Tragkonstruktion KW - Tragwerke KW - FVK KW - Kunststoffbauten KW - Kunststoffhäuser KW - load bearing structure KW - structures KW - fiber reeinforced plastics KW - plastic building Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070226-8468 ER - TY - CHAP A1 - König, Markus T1 - Workflow-Management in der Baupraxis KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8500 ER - TY - BOOK A1 - Damisch, Hubert A1 - Heilmann, Thomas A1 - Bock, Wolfgang A1 - Reichert, Ramón A1 - Vogl, Joseph A1 - Bergermann, Ulrike A1 - Leonhard, Karin A1 - Weiberg, Birk A1 - Kirchmann, Kay A1 - Bexte, Peter A1 - Lauper, Anja A1 - Brandstetter, Thomas A1 - Kuni, Verena A1 - Kursell, Julia A1 - Schäfer, Armin A1 - Witzgall, Susanne A1 - Becker, Lutz ED - Engell, Lorenz ED - Siegert, Bernhard ED - Vogl, Joseph T1 - Wolken N2 - Aufsatzsammlung der Reihe: Archiv für Mediengeschichte 2005. Die Beiträge liefern unterschiedliche Ausschnitte aus einer Medien- und Wissensgeschichte der Wolke und sehen die Wolke als ein Motiv für die Selbstinterpretation zeitgenössischer Kultur. T3 - Archiv für Mediengeschichte - 2005 KW - Wolke Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130318-18708 SN - 3-86068-267-9 PB - Verl. der Bauhaus-Universität CY - Weimar ER - TY - THES A1 - Leitner, Birgit Maria T1 - Wiederholungsstrukturen in den Filmen von Jim Jarmusch T1 - Structures of repetition in films of Jim Jarmusch N2 - Die Dissertation widmet sich den 'Wiederholungsstrukturen in den Filmen von Jim Jarmusch'. Mit dem Thema soll ein neues Konzept der Filmanalyse vorgestellt werden. In seiner Methodologie beruht es auf dem Element der Wiederholung. Die Wiederholung tritt im Film semiotisch auf. Im modernen philosophischen Denken spielt die Wiederholung eine Rolle, indem sie auf bestimmte Weise differentiell auftritt. Im Film bildet die Wiederholung kennzeichnende Codierungen aus. In unterschiedlicher Hinsicht bietet es sich somit an, das Element als Schlüssel zur Filminterpretation aufzugreifen. Das neue Konzept unterscheidet sich von bisherigen filmischen Methoden dadurch, dass mit ihm über das standardisierte Begriffsinstrumentarium aus der Filmwissenschaft hinausgegangen wird, ohne diesem den Rücken zu kehren. Jedoch wird Filmanalyse anhand des Elements der Wiederholung nun genuin als Akt der semiotischen Interpretation und des philosophischen Lesens von Filmen begriffen. In diesem Rahmen beruht das Verstehen von Filmen auf einzelnen und komplexen Zeichen, die im Film Zeitlichkeit und Räumlichkeit herstellen. In poststrukturaler Hinsicht lässt sich die Wiederholung als das konstitutive Moment im Zeit-Bild von Gilles Deleuze verstehen. In der Philosophie gibt es aber noch andere Denker, bei denen die Wiederholung relevant ist. Wie lässt sich die Wiederholung als materielles Element im Film einerseits, als philosophisch Gedachtes andererseits für die Filmanalyse gewinnbringend einsetzen? In Beantwortung dieser Frage wird in der Untersuchung zu den 'Wiederholungsstrukturen in den Filmen von Jim Jarmusch' versucht, dem Konzept des auteur-structuralisme Rechnung zu tragen. In der Lektüre und Interpretation wird Jarmusch als Autor / auteur mit der Struktur seiner Filme 'identifiziert'. Mit der Verschränkung von Autor / auteur und filmischem Text wird auf Roland Barthes Forderung nach der 'Geburt des Lesers' eingegangen. Filme sind demnach auch dann lesbar, wenn der Autor / auteur selbst (in unserem Fall Jim Jarmusch) für das, was er produziert hat, nicht mehr einsteht. Das theoretische Ziel der Untersuchung liegt darin, Erkenntnisse über die filmische Wiederholung zu gewinnen, sowohl in Bezug auf das philosophische Denken der Wiederholung, als auch hinsichtlich ihrer materiellen Verkörperung. Das Denken der Wiederholung wird fragend behandelt, indem wissenschaftlich untersuchend in die filmische Illusion eingegriffen wird. Mit Blick auf das ganze filmische Schaffen Jarmuschs wird aufgezeigt, wie sich seine filmischen „möglichen Welten“ anhand der Aufschlüsselung der Zeichen interpretieren lassen. Die Untersuchung stellt somit ein bislang noch nicht angewandtes Konzept der Betrachtung von Filmen vor, das auch auf andere Filmautoren / auteurs und ihr jeweiliges künstlerisches Schaffen übertragbar wäre. N2 - The following thesis with the title 'Structures of repetition in films of Jim Jarmusch' chooses the element of repetition to examine the cinema of the named author / auteur. It is maintained that repetition (or recurrence) is able to serve as an instrument in film research on different methodological levels and in particular in the matter of semiotic structures or film writing. The element or motive of repetition on which several modern philosophical views are based on can be used for the interpretation and reading of films. Referring to various theorists Gilles Deleuze’s 'Time-Image' - in which repetition occurs in a structural way - is submitted to a new approach. Within the scope, the thesis claims to show that repetition is part of the concept of auteur-structuralism’. KW - Wiederholung KW - Film KW - Philosophie KW - Jim Jarmusch KW - Gilles Deleuze KW - repetition KW - cinema KW - philosophy KW - Jim Jarmusch KW - Gilles Deleuze Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070904-9193 ER - TY - CHAP A1 - Markwardt, Klaus ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - WAVELET ANALYSIS AND FREQUENCY BAND DECOMPOSITIONS N2 - In many applications such as parameter identification of oscillating systems in civil enginee-ring, speech processing, image processing and others we are interested in the frequency con-tent of a signal locally in time. As a start wavelet analysis provides a time-scale decomposition of signals, but this wavelet transform can be connected with an appropriate time-frequency decomposition. For instance in Matlab are defined pseudo-frequencies of wavelet scales as frequency centers of the corresponding bands. This frequency bands overlap more or less which depends on the choice of the biorthogonal wavelet system. Such a definition of frequency center is possible and useful, because different frequencies predominate at different dyadic scales of a wavelet decomposition or rather at different nodes of a wavelet packet decomposition tree. The goal of this work is to offer better algorithms for characterising frequency band behaviour and for calculating frequency centers of orthogonal and biorthogonal wavelet systems. This will be done with some product formulas in frequency domain. Now the connecting procedu-res are more analytical based, better connected with wavelet theory and more assessable. This procedures doesn’t need any time approximation of the wavelet and scaling functions. The method only works in the case of biorthogonal wavelet systems, where scaling functions and wavelets are defined over discrete filters. But this is the practically essential case, because it is connected with fast algorithms (FWT, Mallat Algorithm). At the end corresponding to the wavelet transform some closed formulas of pure oscillations are given. They can generally used to compare the application of different wavelets in the FWT regarding it’s frequency behaviour. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29895 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Schleinkofer, Matthias A1 - Schäfer, T. A1 - van Treeck, Christoph A1 - Rank, Ernst ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VOM LASERSCAN ZUM PLANUNGSTAUGLICHEN PRODUKTMODELL N2 - Im Bereich der Altbausanierung und der Bestandserfassung im Bauwesen ist es häufig notwendig, bestehende Pläne hinsichtlich des Bauwerkszustandes zu aktualisieren oder, wenn diese Pläne nicht (mehr) zugänglich sind, gänzlich neue Planunterlagen des Ist-Zustandes zu erstellen. Ein komfortabler Weg, diese Bauwerksdaten zu erheben, eröffnet die Technologie der Laservermessung. Der vorliegende Artikel stellt in diesem Zusammenhang Ansätze zur Teilautomatisierung der Generierung eines dreidimensionalen Computermodells eines Bauwerkes vor. Als Ergebnis wird ein Volumenmodell bereitgestellt, in dem zunächst die geometrischen und topologischen Informationen über Flächen, Kanten und Punkte im Sinne eines B-rep Modells beschrieben sind. Die Objekte dieses Volumenmodells werden mit Verfahren aus dem Bereich der künstlichen Intelligenz analysiert und in Bauteilklassen systematisch kategorisiert. Die Kenntnis der Bauteilsemantik erlaubt es somit, aus den Daten ein Bauwerks-Produktmodell abzuleiten und dieses einzelnen Fachplanern – etwa zur Erstellung eines Energiepasses – zugänglich zu machen. Der Aufsatz zeigt den erfolgreichen Einsatz virtueller neuronaler Netze im Bereich der Bestandserfassung anhand eines komplexen Beispiels. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30159 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Sampaio, Alcinia Zita A1 - Henriques, Pedro A1 - Studer, P. A1 - Luizi, Rui ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES N2 - The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30090 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Siekierski, Wojciech ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - VARIATION OF ROTATIONAL RESTRAINT IN GRID DECK CONNECTION DUE TO CORROSION DAMAGE AND STRENGTHENING N2 - The approach to assessment of rotational restraint of stringer-to-crossbeam connection in a deck of 100-year old steel truss bridge is presented. Sensitivity of rotational restraint coefficient of the connection to corrosion damage and strengthening is analyzed. Two criteria of the assessment of the rotational restraint coefficient are applied: static and kinematic one. The former is based on bending moment distribution in the considered member, the latter one – on the member rotation at the given joint. 2D-element model of finite element method is described: webs and flanges are modeled with shell elements, while rivets in the connection – with system of beam and spring elements. The method of rivet modeling is verified by T-stub connection test results published in literature. FEM analyses proved that recorded extent of corrosion damage does not alter the initial rotational restraint of stringer-to-crossbeam connection. Strengthening of stringer midspan influences midspan bending moment and stringer end rotation in a different way. Usually restoring member load bearing capacity means strengthening its critical regions (where the highest stress levels occur). This alters flexural stiffness distribution over member length and influences rotational restraint at its connection to other members. The impact depends on criterion chosen for rotational restraint coefficient assessment. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30217 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Hapurne, Tania Mariana A1 - Nistor, S. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - USING MODERN TECHNOLOGIES TO UPGRADE EDILITARY URBAN INFRASTRUCTURE N2 - Adopting the European laws concerning environmental protection will require sustained efforts of the authorities and communities from Romania; implementing modern solutions will become a fast and effective option for the improvement of the functioning systems, in order to prevent disasters. As a part of the urban infrastructure, the drainage networks of pluvial and residual waters are included in the plan of promoting the systems which protect the environmental quality, with the purpose of integrated and adaptive management. The paper presents a distributed control system for sewer network of Iasi town. Unsatisfactory technical state of the actual sewer system is exposed, focusing on objectives related to implementation of the control system. The proposed distributed control system of Iasi drainage network is based on the implementation of the hierarchic control theory for diagnose, sewer planning and management. There are proposed two control levels: coordinating and local execution. Configuration of the distributed control system, including data acquisition and conversion equipment, interface characteristics, local data bus, data communication network, station configuration are widely described. The project wish to be an useful instrument for the local authorities in the preventing and reducing the impact of future natural disasters over the urban areas by means of modern technologies. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29650 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Lehner, Karlheinz A1 - Hartmann, Dietrich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - USING INTERVAL ANALYSIS FOR STRUCTURAL ENGINEERING PROBLEMS N2 - Interval analysis extends the concept of computing with real numbers to computing with real intervals. As a consequence, some interesting properties appear, such as the delivery of guaranteed results or confirmed global values. The former property is given in the sense that unknown numerical values are in known to lie in a computed interval. The latter property states that the global minimum value, for example, of a given function is also known to be contained in a interval (or a finite set of intervals). Depending upon the amount computation effort invested in the calculation, we can often find tight bounds on these enclosing intervals. The downside of interval analysis, however, is the mathematically correct, but often very pessimistic size of the interval result. This is in particularly due to the so-called dependency effect, where a single variable is used multiple times in one calculation. Applying interval analysis to structural analysis problems, the dependency has a great influence on the quality of numerical results. In this paper, a brief background of interval analysis is presented and shown how it can be applied to the solution of structural analysis problems. A discussion of possible improvements as well as an outlook to parallel computing is also given. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29844 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Dudek, Mariusz A1 - Richter, Matthias ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - UNTERSUCHUNGEN ZUR ZUVERLÄSSIGKEIT DES STRAßENBAHNNETZES IN KRAKAU N2 - Der Begriff der Zuverlässigkeit spielt eine zentrale Rolle bei der Bewertung von Verkehrsnetzen. Aus der Sicht der Nutzer des öffentlichen Personennahverkehrs (ÖPNV) ist eines der wichtigsten Kriterien zur Beurteilung der Qualität des Liniennetzes, ob es möglich ist, mit einer großen Sicherheit das Reiseziel in einer vorgegebenen Zeit zu erreichen. Im Vortrag soll dieser Zuverlässigkeitsbegriff mathematisch gefasst werden. Dabei wird zunächst auf den üblichen Begriff der Zuverlässigkeit eines Netzes im Sinne paarweiser Zusammenhangswahrscheinlichkeiten eingegangen. Dieser Begriff wird erweitert durch die Betrachtung der Zuverlässigkeit unter Einbeziehung einer maximal zulässigen Reisezeit. In vergangenen Arbeiten hat sich die Ring-Radius-Struktur als bewährtes Modell für die theoretische Beschreibung von Verkehrsnetzen erwiesen. Diese Überlegungen sollen nun durch Einbeziehung realer Verkehrsnetzstrukturen erweitert werden. Als konkretes Beispiel dient das Straßenbahnnetz von Krakau. Hier soll insbesondere untersucht werden, welche Auswirkungen ein geplanter Ausbau des Netzes auf die Zuverlässigkeit haben wird. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29432 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - GEN A1 - Müller, Alexander T1 - Untersuchung der Realisierbarkeit von regionalen Bädernetzwerken im Rahmen eines PPP-Modells unter Berücksichtigung von Finanzierungs-, Errichtungs- und Betreibungsaspekten als Modellprojekt N2 - Immer häufiger setzen Bund, Länder und Kommunen auf die Zusammenarbeit zwi-schen öffentlicher Hand und Privatwirtschaft. Insbesondere in den Bereichen Sport, Freizeit und Kultur sagen die kommunalen Entscheidungsträger dem Instrument PPP eine große Zukunft voraus. In der vorliegenden Diplomarbeit soll die Realisierbarkeit von PPP in einem regiona-len Bädernetzwerk untersucht werden. Da zu diesem Thema bisher keine Untersu-chung durchgeführt wurde, erfolgte einleitend in die Arbeit eine Marktübersicht, in der die geschichtliche Entwicklung des Badewesens, die heutigen Strukturen und Anforderungen an Bäder sowie eine Kategorisierung der Schwimmstätten nach An-zahl und Typus dargestellt werden. Im zweiten Kapitel wird ein Extrakt der derzeitigen und künftigen Marktgegebenhei-ten vorgenommen. Diesem liegt eine Marktabfrage nebst -auswertung zugrunde, welche bei privatrechtlich firmierten Bäderbetreibern recherchiert wurde. Im darauf folgenden dritten Kapitel werden Varianten für eine regionale Zusammen-arbeit dargelegt. Neben allgemeinen Ausführungen und individuellen Bestimmungen sind Voraussetzungen sowie Vor- und Nachteile der einzelnen Alternativen be-schrieben. Um den Leser mit dem Instrument PPP vertraut zu machen, gibt der vierte Teil eine Einführung in dieses Thema. Hierbei wird der Begriff PPP definiert, eine Abgrenzung des PPP-Inhabermodells, PPP-Konzessionsmodells und des PPP-Gesellschaftsmodells vorgenommen sowie Erläuterungen hinsichtlich rechtlicher und finanzieller Rahmenbedingungen gegeben. Abgeschlossen wird dieses Kapitel mit einer Auflistung der Vor- und Nachteile von PPP. Das fünfte Kapitel befasst sich mit der Gegenüberstellung der o.g. drei PPP-Vertragsmodelle. Vorrangig werden die Unterschiede im Risiko sowie finanzielle und rechtliche Differenzen herausgearbeitet. Betrachtet wird bspw. der Defizitausgleich, die Förderfähigkeit, das Vergabe- und Haushaltsrecht u. v. m. Die Umsetzbarkeit von PPP in einem regionalen Bädernetzwerk wird als vorletztes und damit sechstes Kapitel in dieser Diplomarbeit analysiert. Innerhalb dieses Kapi-tels werden positive Aussichten sowie Problemfelder aus der Sichtweise der Privat-wirtschaft und der öffentlichen Hand näher beleuchtet. Im siebten und abschließenden Kapitel wird ein Gesamtresümee die Arbeit abrun-den. Es kann bereits jetzt gesagt werden, dass ein Ergebnis, welches zu einer fina-len Aussage gelangt und bestimmten Projekten eine uneingeschränkte PPP-Eignung attestiert, nicht gegeben werden kann. Dafür ist jedes Projekt zu verschieden und bedarf einer individuellen Untersuchung. N2 - The German alliance, countries and communities focus more and more on the col-laboration between public authorities and private enterprises. In particular the policy makers predict the sectors sport, leisure and culture a great PPP future. In the available thesis (diploma) the feasibility is to be examined by PPP in a re-gional bath network. Car concerning this theme no investigation is accomplished until now, a market review took place as introduction. In that the historical develop-ment of the bath nature, the today's structures and requirements to baths are repre-sented as well as a categorisation of the swimming places after number and type In the second chapter an excerpt of the present and future market conditions is made. The basis of this is a market inquiry together with evaluation, which was en-quired within private law bath operators. In the following third chapter variants for a regional cooperation are stated. Apart from general remarks and individual regulations conditions as well as pro and cons of the individual alternatives are described. In order to make the reader familiar with the instrument PPP, the fourth part gives an introduction to this topic. Here the term PPP is defined, a demarcation of the PPP owner model, of the PPP concession model and of the PPP society model is made as well as explanations regarding legal and financial basic conditions. This chapter ends with a listing of the pro and cons of PPP. The fifth chapter is concerned with the confrontation of the above mentioned three PPP contract models. The differences in the risk as well as financial and legal dif-ferences are worked out with priority. Deficit reconciliation, the assignment, the promotion ability and budgetary law and so one are regarded. As next to last and thus the sixth chapter in this thesis (diploma) the negotiability of PPP in a regional bath network is analysed. Within this chapter positive prospects as well as problem fields from the aspect of the private sector and the public hand are examined In the seventh and final chapter a total summary will round off the work. Already now it can be said that a result, which leads to a final statement and certifies an unre-stricted PPP suitability cannot be given, because each project is too different and requires an individual investigation. KW - Public Private Partnership KW - PPP KW - Schwimmbad KW - Bäderwesen Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7937 ER - TY - CHAP A1 - Zimmermann, Jürgen A1 - Bartels, Jan-Hendrik ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TREE-BASED METHODS FOR RESOURCE INVESTMENT AND RESOURCE LEVELLING PROBLEMS N2 - The execution of project activities generally requires the use of (renewable) resources like machines, equipment or manpower. The resource allocation problem consists in assigning time intervals to the execution of the project activities while taking into account temporal constraints between activities emanating from technological or organizational requirements and costs incurred by the resource allocation. If the total procurement cost of the different renewable resources has to be minimized we speak of a resource investment problem. If the cost depends on the smoothness of the resource utilization over time the underlying problem is called a resource levelling problem. In this paper we consider a new tree-based enumeration method for solving resource investment and resource levelling problems exploiting some fundamental properties of spanning trees. The enumeration scheme is embedded in a branch-and-bound procedure using a workload-based lower bound and a depth first search. Preliminary computational results show that the proposed procedure is promising for instances with up to 30 activities. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30405 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Bauch, Ullrich T1 - Transparenz im Änderungsmanagement - ein Vorteil für alle Vertragspartner? KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8460 ER - TY - CHAP A1 - Huhnt, Wolfgang A1 - Gielsdorf, F. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TOPOLOGICAL INFORMATION AS LEADING INFORMATION IN BUILDING PRODUCT MODELS N2 - Digital models of buildings are widely used in civil engineering. In these models, geometric information is used as leading information. Engineers are used to have geometric information, and, for instance, it is state of the art to specify a point by its three coordinates. However, the traditional approaches have disadvantages. Geometric information is over-determined. Thus, more geometric information is specified and stored than needed. In addition, engineers already deal with topological information. A denotation of objects in buildings is of topological nature. It has to be answered whether approaches where topological information becomes a leading role would be more efficient in civil engineering. This paper presents such an approach. Topological information is modelled independently of geometric information. It is used for denoting the objects of a building. Geometric information is associated to topological information so that geometric information “weights” a topology. The concept presented in this paper has already been used in surveying existing buildings. Experiences in the use of this concept showed that the number of geometric information that is required for a complete specification of a building could be reduced by a factor up to 100. Further research will show how this concept can be used in planning processes. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29110 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Wolkowicz, Christian A1 - Ruth, Jürgen A1 - Stahr, Alexander ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TOOL TO CHECK TOPOLOGY AND GEOMETRY FOR SPATIAL STRUCTURES ON BASIS OF THE EXTENDED MAXWELL'S RULE N2 - One of the simplest principle in the design of light-weight structures is to avoid bending. This can be achieved by dissolving girders into members acting purely in axial tension or compression. The employment of cables for the tensioned members leads to even lighter structures which are called cable-strut structures. They constitute a subclass of spatial structures. To give fast information about the general feasibility of an architectural concept employing cable-strut structures is a challenging task due to their sophisticated mechanical behavior. In this regard it is essential to control if the structure is stable and if pre-stress can be applied. This paper presents a tool using the spreadsheet software Microsoft (MS) Excel which can give such information. Therefore it is not necessary to purchase special software and the according time consuming training is much lower. The tool was developed on basis of the extended Maxwell's rule, which besides topology also considers the geometry of the structure. For this the rank of the node equilibrium matrix is crucial. Significance and determination of the rank and the implementation of the corresponding algorithms in MS Excel are described in the following. The presented tool is able to support the structural designer in an early stage of the project in finding a feasible architectural concept for cable-strut structures. As examples for the application of the software tool two special cable-strut structures, so called tensegrity structures, were examined for their mechanical behavior. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30370 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Chang, Wei-Tsang A1 - Chang, Teng-Wen ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TIME-BASED FORM TRANSFORMATION WITH FOLDING SPACE N2 - Design activity could be treated as state transition computationally. In stepwise processing, in-between form-states are not easily observed. However, in this research time-based concept is introduced and applied in order to bridge the gap. In architecture, folding is one method of form manipulation and architects also want to search for alternatives by this operation. Besides, folding operation has to be defined and parameterized before time factor is involved as a variable of folding. As a result, time-based transformation provides sequential form states and redirects design activity. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29371 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER -