TY - THES A1 - Amiri, Fatemeh T1 - Computational modelling of fracture with local maximum entropy approximations N2 - The key objective of this research is to study fracture with a meshfree method, local maximum entropy approximations, and model fracture in thin shell structures with complex geometry and topology. This topic is of high relevance for real-world applications, for example in the automotive industry and in aerospace engineering. The shell structure can be described efficiently by meshless methods which are capable of describing complex shapes as a collection of points instead of a structured mesh. In order to find the appropriate numerical method to achieve this goal, the first part of the work was development of a method based on local maximum entropy (LME) shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method (XFEM) at a comparable computational cost. In addition, we keep the advantages of the LME shape functions,such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes near the crack such as blending or shifting. As extension of this method to three dimensional problems and complex thin shell structures with arbitrary crack growth is cumbersome, we developed a phase field model for fracture using LME. Phase field models provide a powerful tool to tackle moving interface problems, and have been extensively used in physics and materials science. Phase methods are gaining popularity in a wide set of applications in applied science and engineering, recently a second order phase field approximation for brittle fracture has gathered significant interest in computational fracture such that sharp cracks discontinuities are modeled by a diffusive crack. By minimizing the system energy with respect to the mechanical displacements and the phase-field, subject to an irreversibility condition to avoid crack healing, this model can describe crack nucleation, propagation, branching and merging. One of the main advantages of the phase field modeling of fractures is the unified treatment of the interfacial tracking and mechanics, which potentially leads to simple, robust, scalable computer codes applicable to complex systems. In other words, this approximation reduces considerably the implementation complexity because the numerical tracking of the fracture is not needed, at the expense of a high computational cost. We present a fourth-order phase field model for fracture based on local maximum entropy (LME) approximations. The higher order continuity of the meshfree LME approximation allows to directly solve the fourth-order phase field equations without splitting the fourth-order differential equation into two second order differential equations. Notably, in contrast to previous discretizations that use at least a quadratic basis, only linear completeness is needed in the LME approximation. We show that the crack surface can be captured more accurately in the fourth-order model than the second-order model. Furthermore, less nodes are needed for the fourth-order model to resolve the crack path. Finally, we demonstrate the performance of the proposed meshfree fourth order phase-field formulation for 5 representative numerical examples. Computational results will be compared to analytical solutions within linear elastic fracture mechanics and experimental data for three-dimensional crack propagation. In the last part of this research, we present a phase-field model for fracture in Kirchoff-Love thin shells using the local maximum-entropy (LME) meshfree method. Since the crack is a natural outcome of the analysis it does not require an explicit representation and tracking, which is advantageous over techniques as the extended finite element method that requires tracking of the crack paths. The geometric description of the shell is based on statistical learning techniques that allow dealing with general point set surfaces avoiding a global parametrization, which can be applied to tackle surfaces of complex geometry and topology. We show the flexibility and robustness of the present methodology for two examples: plate in tension and a set of open connected pipes. KW - Fracture mechanics KW - Local maximum entropy approximants KW - PU Enrichment method KW - Phase-field model KW - Thin shell KW - Kirchoff--love theory Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160719-26310 ER - TY - JOUR A1 - Klein, Bernhard A1 - König, Reinhard T1 - Computational Urban Planning: Using the Value Lab as Control Center JF - FCL Magazine, Special Issue Simulation Platform N2 - Urban planning involves many aspects and various disciplines, demanding an asynchronous planning approach. The level of complexity rises with each aspect to be considered and makes it difficult to find universally satisfactory solutions. To improve this situation we propose a new approach, which complement traditional design methods with a computational urban plan- ning method that can fulfil formalizable design requirements automatically. Based on this approach we present a design space exploration framework for complex urban planning projects. For a better understanding of the idea of design space exploration, we introduce the concept of a digital scout which guides planners through the design space and assists them in their creative explorations. The scout can support planners during manual design by informing them about potential im- pacts or by suggesting different solutions that fulfill predefined quality requirements. The planner can change flexibly between a manually controlled and a completely automated design process. The developed system is presented using an exemplary urban planning scenario on two levels from the street layout to the placement of building volumes. Based on Self-Organizing Maps we implemented a method which makes it possible to visualize the multi-dimensional solution space in an easily analysable and comprehensible form. KW - Computational Urban Design KW - Stadtgestaltung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26011 SP - 38 EP - 45 ER - TY - CHAP A1 - Chirkin, Artem A1 - König, Reinhard T1 - Concept of Interactive Machine Learning in Urban Design Problems : proceedings N2 - This work presents a concept of interactive machine learning in a human design process. An urban design problem is viewed as a multiple-criteria optimization problem. The outlined feature of an urban design problem is the dependence of a design goal on a context of the problem. We model the design goal as a randomized fitness measure that depends on the context. In terms of multiple-criteria decision analysis (MCDA), the defined measure corresponds to a subjective expected utility of a user. In the first stage of the proposed approach we let the algorithm explore a design space using clustering techniques. The second stage is an interactive design loop; the user makes a proposal, then the program optimizes it, gets the user’s feedback and returns back the control over the application interface. KW - MCDM KW - interactive machine learning KW - urban design KW - multiple-criteria optimization KW - Stadtgestaltung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26000 UR - http://dl.acm.org/citation.cfm?id=2898365 SP - 10 EP - 13 PB - ACM New York, NY, USA CY - San Jose, CA, USA ER - TY - JOUR A1 - Marzban, Samira A1 - Lahmer, Tom T1 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects JF - Journal of Statistical Theory and Practice N2 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 589 EP - 611 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Zhuang, Xiaoying A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - Detection of material interfaces using a regularized level set method in piezoelectric structures JF - Inverse Problems in Science and Engineering N2 - Detection of material interfaces using a regularized level set method in piezoelectric structures KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 153 EP - 176 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets JF - International Journal for Numerical Methods in Engineering N2 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 960 ER - TY - THES A1 - Rausch, Gabriel T1 - Dreidimensionale Webanwendungen zur Verräumlichung von Informationen N2 - Die vorliegende Arbeit untersucht das Potential von Webanwendungen in 3D zur Vermittlung von Informationen im Allgemeinen und zur Darstellung von städtebaulichen Zusammenhängen im Speziellen. Als grundlegender Faktor der visuellen und funktionalen Qualität - welche die Wahrnehmung des Nutzers direkt beeinflusst -, erfolgt die Bewertung der Machbarkeit von 3D Webinhalten unter Anwendung einer explorativen, qualitativen Evaluierung von Webagenturen. Darauf aufbauend wird das Potential von 3D Webanwendungen aus Nutzerperspektive untersucht, um Zusammenhänge herstellen zu können: einerseits zwischen der Machbarkeit bei der Entwicklung und anderseits die Akzeptanzkriterien beim Rezipienten betreffend. Die empirische Studie, die mit dem Forschungspartner Bosch für diese Arbeit modelliert wurde, eruiert zum einen, inwiefern 3D im Vergleich zu 2D und 2,5D, und zum anderen WebGL im Vergleich zu bisherigen 3D Webtechnologien die visuelle Wahrnehmung und kognitive Leistungsfähigkeit des Nutzers beeinflusst. Die Erkenntnisse der Untersuchung zeigen Parallelen zu bestehenden Studien aus web-fernen Bereichen. Um die Bedeutung von 3D Webanwendungen zur Verbesserung von Entscheidungsprozessen in Stadtplanungsprojekten ableiten zu können, werden Aspekte zur Interaktion und visuellen Wahrnehmung in den speziellen Kontext von Stadtplanungswerkzeugen gebracht. Dabei wird überprüft, ob sich web-basierte 3D Visualisierungen sinnvoll zur Vermittlung städtebaulicher Zusammenhänge einbinden lassen und inwieweit bestehende Projekte, wie in dieser Arbeit beispielhaft das vom Fraunhofer IGD entwickelte Forschungsprojekt urbanAPI, die Technologie WebGL nutzen können. Vor diesem Hintergrund soll die Arbeit Akzeptanzkriterien und Nutzungsbarrieren von 3D Webanwendungen auf Basis der Technologie WebGL identifizieren, um einen Beitrag zur Machbarkeit von Webanwendungen und zur Entwicklung entsprechender Stadtplanungswerkzeuge zu leisten. KW - WEB KW - WebGL KW - 3D KW - Web KW - Application KW - Urban Planning Tool KW - Stadtplanung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20161116-27029 ER - TY - THES A1 - Voland, Katja T1 - Einfluss der Porosität von Beton auf den Ablauf einer schädigenden Alkali-Kieselsäure-Reaktion N2 - Der Dissertation liegt die Frage zugrunde, welchen Einfluss die Porosität von Beton auf den Ablauf einer schädigenden AKR hat. Insbesondere soll geklärt werden, ob der Einsatz von Gleitschalungsfertigern – anstelle von klassischen schienengeführten Betondeckenfertigern – und die damit verbundene verringerte Porosität der Betone den Ablauf einer schädigenden AKR begünstigt. Eine verringerte Porosität führt zu einer reduzierten Duktilität des Betons, so dass infolge AKR entstehende Zugspannungen schlechter abgebaut werden können. Weiterhin steht ein geringerer Expansionsraum für das entstehende AKR-Gel zur Verfügung. Diese Faktoren können den Ablauf einer AKR begünstigen. Allerdings können extern anstehende Alkalien schlechter in den Beton mit einer verringerten Porosität eindringen. Ferner wird die Diffusion der Alkalien zu den potenziell reaktiven Gesteinskörnungen verlangsamt. Zur Beantwortung der aufgeworfenen Frage wird unter Einsatz einer neuartigen Prüfmethodologie und bei variierender Porosität untersucht, welche Schädigungsparameter maßgebend für den Ablauf und die Intensität einer schädigenden AKR sind. Die berücksichtigten Schädigungsparameter sind die mechanischen Eigenschaften des Betons, der zur Verfügung stehende Expansionsraum und die im Beton ablaufenden Transportvorgänge. Um den Einfluss der jeweiligen Schädigungsparameter spezifizieren zu können, gehen die Prüfungen einerseits von einem hohen internen und andererseits von einem hohen externen AKR-Schädigungspotenzial aus. In beiden Fällen erfolgen die Untersuchungen an langsam reagierenden alkaliempfindlichen Gesteinskörnungen. Die unterschiedlichen Porositäten ergeben sich hauptsächlich durch Variation des w/z-Wertes. Bei dem hohen internen AKR-Schädigungspotenzial stehen die mechanischen Eigenschaften und der Expansionsraum im Vordergrund; außerdem ist der Einfluss der Zugabe eines LP-Bildners zu analysieren. Um ein hohes internes AKR-Schädigungspotenzial zu erreichen, kommt bei der Herstellung der Betonprobekörper ein Zement mit einem hohen Alkaligehalt zum Einsatz. Die Betonprobekörper werden der 40 °C-Nebelkammerlagerung und dem 60 °C-Betonversuch über Wasser unterzogen. Dabei findet eine neue Prüfmethodologie Anwendung, die der kontinuierlichen Messung der Dehnung und der ablaufenden Erhärtungs- und Rissbildungsprozesse dient. Diese Prüfmethodologie umfasst die Messung der Ultraschallgeschwindigkeit, die Schallemissionsanalyse und die µ-3D-Computertomografie. Hingegen richtet sich der Fokus bei dem hohen externen AKR-Schädigungspotenzial auf die Transportvorgänge. Zur Provokation eines hohen externen AKR-Schädigungspotenzials werden die Probekörper der FIB-Klimawechsellagerung ausgesetzt. N2 - This thesis deals with the question of how the porosity of concrete influences the process of a damaging alkali-silica-reaction (“ASR”). In particular, it is examined whether the use of slip form pavers and the reduced porosity resulting from this use have an effect on the process of a damaging ASR. A reduced porosity leads to a lower ductility of the concrete. Thus it is more difficult for the tensile stress to be reduced. Moreover, the space for the ASR gel to expand is reduced. These consequences promote the ASR. By contrast, the permeability of the concrete is lower. Hence, the penetration of external alkalis is reduced and the diffusion of the alkalis to the potentially reactive aggregate slowed down. An innovative non-destructive testing methodology is applied to answer this question. Based on variations of the porosity it is examined which damage parameters influence the process and intensity of a damaging ASR. The damaging parameters taken into consideration are the mechanical properties of the concrete, the expansion space and the transport processes within the concrete. In order to determine the influence of the relevant damaging parameters two categories of tests are conducted: one category is based on a high internal potential for damages due to ASR, the other one on a high external potential. In both cases alkali-reactive slow/late aggregates are tested. The different porosities of the concrete mainly result from a variation of the w/c-ratio. In case of a high internal potential for ASR-damages the mechanical properties and the expansion space play the most important role. Furthermore; the influence of an air-entraining agent on the process of a damaging ASR is taken into account. The high internal potential for ASR-damages is provoked by the use of cement with a high amount of alkalises for the production of the concrete samples. These samples are stored in the 40 °C fog chamber storage and the 60 °C concrete prisms test. On the one hand the expansion and the change in mass as well as the eigenfrequency are measured discon-tinuously in the conventional way. On the other hand the innovative testing methodology applied to these ASR-provoked stored concrete samples serves to continuously measure the expansion and the hardening as well as crack formation processes. This methodology comprises a determination of the ultrasonic velocity and of acoustic emissions as well as 3-dimensional micro X-ray computed tomography (µ-3D-CT). The high external potential for ASR-damages is provoked by the cyclic climate storage, designed by FIB. The analysis of these concretes focuses on transportation processes. KW - Alkali-Kieselsäure-Reaktion KW - Beton KW - Porosität KW - Auslaugung KW - Natriumchlorid KW - FIB-Klimawechsellagerung KW - 40 °C Nebelkammer KW - 60 °C-Betonversuch über Wasser KW - Schallemissionsanalyse KW - µ-3D Computertomografie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160418-25598 ER - TY - JOUR A1 - Bore, Thierry A1 - Wagner, Norman A1 - Lesoille, Sylvie Delepine A1 - Taillade, Frederic A1 - Six, Gonzague A1 - Daout, Franck A1 - Placko, Dominique T1 - Error analysis of clay-rock water content estimation with broadband high-frequency electromagnetic sensors—air gap effect JF - Sensors N2 - Broadband electromagnetic frequency or time domain sensor techniques present high potential for quantitative water content monitoring in porous media. Prior to in situ application, the impact of the relationship between the broadband electromagnetic properties of the porous material (clay-rock) and the water content on the frequency or time domain sensor response is required. For this purpose, dielectric properties of intact clay rock samples experimental determined in the frequency range from 1 MHz to 10 GHz were used as input data in 3-D numerical frequency domain finite element field calculations to model the one port broadband frequency or time domain transfer function for a three rods based sensor embedded in the clay-rock. The sensor response in terms of the reflection factor was analyzed in time domain with classical travel time analysis in combination with an empirical model according to Topp equation, as well as the theoretical Lichtenecker and Rother model (LRM) to estimate the volumetric water content. The mixture equation considering the appropriate porosity of the investigated material provide a practical and efficient approach for water content estimation based on classical travel time analysis with the onset-method. The inflection method is not recommended for water content estimation in electrical dispersive and absorptive material. Moreover, the results clearly indicate that effects due to coupling of the sensor to the material cannot be neglected. Coupling problems caused by an air gap lead to dramatic effects on water content estimation, even for submillimeter gaps. Thus, the quantitative determination of the in situ water content requires careful sensor installation in order to reach a perfect probe clay rock coupling. KW - Wassergehalt KW - Ton KW - Zeitbereichsreflektometrie KW - Impedanzspektroskopie KW - Dielektrische Spektroskopie KW - water content measurement; TDR probe; clay-rock; dielectric spectroscopy; frequency domain finite element modeling Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170418-31248 UR - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84964200266&doi=10.3390%2fs16040554&partnerID=40&md5=26e537724db3b28e237009acde7676cd SP - 1 EP - 14 ER - TY - JOUR A1 - Meunier, David A1 - Walther, Christoph A1 - Worsley, Tom A1 - Dahl, Alexander A1 - Le Maître, Hélène T1 - Evolutions of the Reference Values Used in Transport CBA National Guidelines of 3 Countries and What they Reveal JF - Transportation Research Procedia 13 N2 - The paper presents, analyses and compares the evolution of reference values used in national guidelines issued for cost-benefit analysis of transport infrastructure projects, over the last fifty years, in France, UK and Germany. KW - Verkehrsinfrastruktur KW - Kosten-Nutzen-Analyse KW - Richtlinien Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170406-31106 UR - http://www.sciencedirect.com/science/article/pii/S2352146516300114 SP - 100 EP - 113 ER - TY - JOUR A1 - Bremer, K. A1 - Wollweber, M. A1 - Weigand, F. A1 - Rahlves, M. A1 - Kuhne, Michael A1 - Helbig, R. A1 - Roth, B. T1 - Fibre Optic Sensors for the Structural Health Monitoring of Building Structures JF - Procedia Technology 26 N2 - In this work different fibre optic sensors for the structural health monitoring of civil engineering structures are reported. A fibre optic crack sensor and two different fibre optic moisture sensors have been designed to detect the moisture ingress in concrete based building structures. Moreover, the degeneration of the mechanical properties of optical glass fibre sensors and hence their long-term stability and reliability due to the mechanical and chemical impact of the concrete environment is discussed as well as the advantage of applying a fibre optic sensor system for the structural health monitoring of sewerage tunnels is demonstrated. KW - Structural Health Monitoring KW - crack sensor; fibre optic sensor; humidity sensor; SHM Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170331-30912 UR - http://www.sciencedirect.com/science/article/pii/S2212017316304121 SP - 524 EP - 529 ER - TY - JOUR A1 - Hijazi, Ihab Hamzi A1 - König, Reinhard A1 - Schneider, Sven A1 - Li, Xin A1 - Bielik, Martin A1 - Schmitt, Gerhard A1 - Donath, Dirk T1 - Geostatistical Analysis for the Study of Relationships between the Emotional Responses of Urban Walkers to Urban Spaces JF - International Journal of E-Planning Research N2 - The described study aims to find correlations between urban spatial configurations and human emotions. To this end, the authors measured people’s emotions while they walk along a path in an urban area using an instrument that measures skin conductance and skin temperature. The corresponding locations of the test persons were measured recorded by using a GPS-tracker (n=13). The results are interpreted and categorized as measures for positive and negative emotional arousal. To evaluate the technical and methodological process. The test results offer initial evidence that certain spaces or spatial sequences do cause positive or negative emotional arousal while others are relatively neutral. To achieve the goal of the study, the outcome was used as a basis for the study of testing correlations between people’s emotional responses and urban spatial configurations represented by Isovist properties of the urban form. By using their model the authors can explain negative emotional arousal for certain places, but they couldn’t find a model to predict emotional responses for individual spatial configurations. KW - Emotion KW - Isovist KW - Geo-Statistical Analysis KW - GIS KW - Geografie KW - Architektur Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26025 N1 - Erschienen in: International Journal of E-Planning Research ; Volume 5, Issue 1 (2016) SP - 1 EP - 19 ER - TY - JOUR A1 - Nguyen-Tuan, Long A1 - Lahmer, Tom A1 - Datcheva, Maria A1 - Schanz, Tom T1 - Global and local sensitivity analyses for coupled thermo‐hydro‐mechanical problems JF - International Journal for Numerical and Analytical Methods in Geomechanics N2 - Global and local sensitivity analyses for coupled thermo‐hydro‐mechanical problems KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 ER - TY - THES A1 - Schöler, Axel T1 - Hydration of multi-component cements containing clinker, slag, type-V fly ash and limestone N2 - Problemstellung und Zielsetzung 1. Die Herstellung von Portlandzementklinker trägt zu etwa 5 bis 8 % zur jährlichen Emissionsmenge an menschlich generiertem CO2 bei. Dies ist begründet in der Verwendung von fossilen Brennstoffen (ca. 40 % des gesamten CO2) und in der Entsäuerung des stark kalksteinhaltigen Rohmehls (ca. 60 % des gesamten CO2). 2. Verschiedene Strategien zur Verringerung des Ausstoßes an CO2 werden angewandt. Dies sind insbesondere die Optimierung der Prozessführung bei der Klinkerherstellung, die Verwendung alternativer Brennstoffe und die teilweise Substitution des Klinkeranteils in Zementen mit mehreren Hauptbestandteilen durch Zementersatzstoffe, sogenannte SCM (supplementary cementitious materials), wobei Hüttensand, Flugasche und Kalksteinmehl die meist verwendeten Materialien darstellen. 3. Durch die Reduktion des Klinkeranteils können quaternäre Systeme nicht nur einen Beitrag zur Reduzierung von CO2-Emissionen leisten. Ebenfalls ist es mit derartigen Systemen möglich Hüttensande und Flugaschen möglichst ökonomisch einzusetzen und gegebenenfalls auf Engpässe bei deren Verfügbarkeit zu reagieren. 4. Hüttensande und Flugaschen zeigen Ähnlichkeiten in ihrer prinzipiellen chemischen Zusammensetzung, so dass ähnliche Hydratphasen während ihrer Reaktion in Anwesenheit von Portlandzement gebildet werden können. Im Vergleich zu ternären Systemen, die neben Kalkstein auch Hüttensand oder Flugasche enthalten, kann bei quaternären Zementen, die neben Kalkstein sowohl Hüttensand als auch Flugasche enthalten, eine ähnliche Phasenentwicklung und damit auch ähnliche Festigkeitsentwicklung erwartet werden. 5. Die Verwendung von SCM als Zementersatzstoff ist durch die im Vergleich zu Portlandzement deutlich langsamere Reaktion und die dadurch bedingte ebenfalls langsamere Festigkeitsentwicklung begrenzt. Dies betrifft insbesondere die Entwicklung innerhalb der ersten 28 Tage. Dementsprechend ist es unerlässlich die Reaktivität von SCM wie Hüttensanden und Flugaschen eingehend zu untersuchen um die Reaktionsfähigkeit- und Geschwindigkeit und somit die Festigkeitsentwicklung zu steigern. 6. Die frühe Reaktion der Hauptklinkerphasen ist weitgehend untersucht und beschrieben, wobei entsprechende Studien meist hochverdünnte Modellsysteme betrachten. Jedoch gibt es kaum Hinweise inwiefern diese Erkenntnisse auf konzentrierte Systeme bei realistischen Wasser-Feststoff Verhältnissen übertragen werden können. Entsprechende Untersuchungen sind nötig um die Wechselwirkungen von Portlandzement und SCM in der Frühphase der Reaktion zu beschreiben. Stand der Wissenschaft 7. In verdünnten Systemen führt steigender Ca-Gehalt zu einer niedrigeren Auflösungsrate von C3S und C2S. 8. Bestimmende Faktoren der Auflösung von C3S sind sowohl die Untersättigung bezüglich C3S als auch die Übersättigung in Bezug auf C-S-H. 9. Erhöhte Al-Konzentrationen führen zur Verzögerung der Hydratation von C3S. Dies kann begründet sein durch die Einbindung von Al in C-S-H und eine dadurch bedingte deutlich langsamere Wachstumsrate von C-(A)-S-H. Ebenfalls scheint ein verzögernder Effekt von Al auf die Auflösung von C3S möglich. 10. Die Oberfläche von Kalkstein bietet besonders gute Bedingungen für die Keimbildung von C-S-H, so dass im Vergleich zu anderen SCM in Anwesenheit von Kalkstein deutlich mehr C-S-H Keime gebildet werden. 11. Die Reaktivität von Hüttensand und Flugasche wird einerseits durch die Korngrösse, andererseits jedoch auch durch die intrinsische Reaktivität des amorphen Anteils selbst bestimmt. 12. In amorphen (Calcium)Aluminosilikaten führt ein steigender Gehalt an Netzwerkmodifizierern, wie z.B. CaO, zu einem stärker depolymerisierten Glasnetzwerk und damit zu steigender Reaktivität. Die Wirkung von amphoteren Oxiden (Al2O3, Fe2O3) die sowohl als Netzwerkmodifizierer als auch als Netzwerkbildner auftreten können ist nicht vollständig geklärt. 13. CO2 haltige Monophasen besitzen im Vergleich zu Monosulfoaluminat eine höhere thermodynamische Stabilität, wodurch Ettringit stabilisiert wird. Durch das hohe spezifische Volumen von Ettringit wird ein Maximum an Raumausfüllung, dadurch eine geringere Porosität und in Folge ein Maximum an Festigkeit erreicht. 14. Kalkstein reagiert nur in geringem Ausmaß entsprechend dem zur Reaktion vorhandenen Al2O3, wobei sich zunächst Hemicarboaluminat, später Monocarboaluminat bildet. Dabei wird Al2O3 nicht nur durch den Portlandzement selbst, sondern auch durch die Auflösung von SCM, insbesondere von Flugasche, zur Verfügung gestellt. Methodik 15. Der Einfluss von SCM auf die frühe Hydratation von Portlandzement in binären (d.h. Hüttensand oder Flugasche oder Quarz) und ternären (d.h. Flugasche und Kalkstein) Systemen wurde mittels isothermer Kalorimetrie und Porenlösungsanalysen untersucht. Über die chemische Zusammensetzung der Porenlösung ermittelte Sättigungsindices und Löslichkeitsprodukte wurden in Bezug zur Wärmeentwicklung gesetzt. Basierend auf den ermittelten Daten wurde evaluiert, inwiefern Mechanismen die die Hydratation von reinen Klinkerphasen in verdünnten Systemen bestimmen ebenfalls in Zementpasten unter realistischen Bedingungen maßgebend sind. 16. Der Einfluss der chemischen Zusammensetzung auf die Reaktivität von Gläsern bei hohem pH (>13) wurde mittels Ionenchromatographie in hoch verdünnten Systemen untersucht. Puzzolanitätstests wurden an vereinfachten Modellsystemen sowie an Portlandzement-Glass-Systemen durchgeführt. Das Reaktionsverhalten der Gläser wurde über isotherme Kalorimetrie und thermogravimetrische Experimente untersucht. Über Massenbilanzkalkulationen kann der Gehalt an gebundenem Wasser in Funktion der Menge an reagiertem Glas berechnet werden. Ein Abgleich mit gebundenem Wasser bestimmt über thermogravimetrische Untersuchungen erlaubt es, den Reaktionsgrad der Gläser abzuschätzen. Zusätzliche Experimente mittels selektiver Lösung wurden zu Vergleichszwecken durchgeführt. 17. Die Reaktionskinetik von quaternären Pasten die sowohl Kalksteinmehl als auch Hüttensand und Flugasche enthalten wurden bis zum Alter von 28 Tagen mittels isothermer Kalorimetrie und Experimenten zum chemischen Schwinden untersucht. Ergänzend wurden Festigkeitsprüfungen an Mörtelprismen durchgeführt. 18. Quaternäre Pasten wurden ebenfalls hinsichtlich der gebildeten Hydratphasen bis zu einem Alter von 182 Tagen untersucht. Hierzu wurden basierend auf thermodynamischen Modellierungen volumetrische Berechnungen zum gesamten Phasenvolumen als Funktion des Kalkstein- und des Flugaschen- bzw. Hüttensandgehalts durchgeführt. Ergänzt durch thermogravimetrische Ermittlung des Gehalts an gebundenem Wasser und Portlandit, sowie mittels qualitativen röntgendiffraktometrischen Untersuchungen wurden die Ergebnisse der thermodynamischen Berechnungen mit der Festigkeitsentwicklung von Mörtelprismen abgeglichen. 19. Porenlösungen von quaternären Systemen wurden bis zu einem Alter von 728 Tagen mittels Ionenchromatographie und pH-Bestimmung analysiert. Über die ermittelten Konzentrationen wurden Sättigungsindices für relevante Phasen ermittelt. Im Hinblick auf den Einfluss des Hüttensandes wurden Porenlösungen für ausgewählte Systeme bei verschiedenen Hüttensandgehalten (20 und 30 M.%) bei 91 Tagen, sowie für die gesamten Matrix bis zu 91 Tagen, auf verschiedene Schwefelspecies untersucht. Im Wesentlichen erzielte Ergebnisse 20. Untersuchungen zur frühen Reaktionskinetik von binären Systemen zeigten einen stärkeren Wärmefluss in Anwesenheit von SCM, bedingt durch erhöhte für die Keimbildung zur Verfügung stehende Oberfläche sowie eine geringere (Über)Sättigung bezüglich C-S-H. Erhöhte Ca-Konzentrationen führten nicht zu langsamerer Auflösung von C3S, wie dies für reine Phasen bei hoher Verdünnung beobachtet wurde. Im Gegensatz zu Untersuchungen in Reinstsystemen führten höhere Ca-Konzentrationen nicht zu geringeren Reaktionsraten von C3S. Die schnellste Reaktion wurde bei Anwesenheit von Kalkstein, d.h. den höchsten Ca-Konzentrationen, beobachtet. Die grundsätzliche Reaktionscharakteristik zeigt einen inversen Bezug zur Untersättigung bezüglich C3S, wobei höhere Untersättigung zu schnellerer Reaktion führt. Wie ebenfalls in Reinstsystemen bei hoher Verdünnung beobachtet, führt die Anwesenheit von Aluminium zur Verzögerung der Reaktion. Höhere SO42–-Konzentrationen wurden in Anwesenheit von Flugasche beobachtet was die Ettringitausfällung verhinderte und zu höheren Al-Konzentrationen führt. Dieser Mechanismus führt zu höheren Al-Konzentrationen in Gegenwart von Quarz, Hüttensand und Kalkstein im Gegensatz zu Anwesenheit von Flugasche. 21. Die frühe Hydratation von quaternären Systemen wird in Anwesenheit von Kalkstein deutlich beschleunigt, während Flugasche zu einer Verzögerung führt. Im Gegensatz zu einem Referenzsystem mit inertem Quarz konnte mittels isothermer Kalorimetrie und chemischem Schwinden eine Reaktionsbeschleunigung in Anwesenheit von Hüttensand nachgewiesen werden. Weitere Zugaben an Flugasche, Kalkstein oder Mischungen von beiden führten zu einer weiteren Beschleunigung, wobei die Unterschiede zwischen diesen Materialien zu gering sind um eine klare Unterscheidung zu ermöglichen. 22. Bei allen zur Glasauflösung- bzw. Reaktivität durchgeführten Experimenten zeigten sich identische Trends, d.h. steigende Reaktivität und Auflösungsgeschwindigkeit mit steigendem Anteil an Netzwerkmodifizierern innerhalb der Glasstruktur. Die Ergebnisse weisen darauf hin, dass Al2O3 in sämtlichen betrachteten Glaszusammensetzungen vorwiegend als Netzwerkmodifizierer vorliegt. Die thermogravimetrische Bestimmung von gebundenem Wasser bei den Modellsystemen und den glashaltigen Zementen kann über Massenbilanzberechnungen als Funktion des Anteils an reagiertem Glas zur Abschätzung des Glasreaktionsgrades verwendet werden. 23. Zu frühen Zeiten von bis zu 7 Tagen hat der Anteil an Hüttensand, Flugasche oder Kalkstein keinen wesentlichen Einfluss auf die Festigkeitsentwicklung. Zu späteren Zeiten wurde über thermodynamische Berechnungen ein Reaktionsgrad des enthaltenen CaCO3 (Calcit) von 2 bis 5 M.% ermittelt. Dies führt zur Bildung von Hemicarboaluminat und Monocarboaluminat wodurch Ettringit indirekt stabilisiert wird. In Folge ergibt sich ein höheres absolutes Volumen der gebildeten Hydratphasen und damit höhere Festigkeiten wie Festigkeitsuntersuchungen an Mörtelprismen zeigen. Dabei hängt der Reaktionsgrad des CaCO3 vom verfügbaren Al2O3 ab, welches neben dem Portlandzement selbst auch durch die Reaktion von Hüttensand, im Besonderen aber durch die Auflösung der Flugasche zur Verfügung steht. 24. Allgemein hat die Anwesenheit von Hüttensand und Flugasche in Gegenwart von Kalkstein wenig Einfluss auf die gebildeten Hydratphasen. Die sukzessive Substitution von Hüttensand durch Flugasche führt zu einer geringen Abnahme von Portlandit und C-S-H und begünstigt die Bildung von mehr Monocarboaluminat und Hemicarboaluminat. Portlandit reagiert puzzolanisch mit der Flugasche wobei sich C-S-H bildet. Dennoch führt die geringe Reaktivität der Flugasche zu geringerem Gehalt an C-S-H was wiederrum sinkendes gesamtes Hydratphasenvolumen und damit niedrigere Festigkeitswerte generiert. Allerdings ist der Einfluss gering und alle untersuchten Systeme erreichen die Festigkeitsklasse 42.5 N entsprechend EN 196-1. 25. Analog zur Hydratphasenbildung zeigten Untersuchungen der Porenlösungschemie von quaternären Systemen durchweg ähnliche Ergebnisse. Entsprechend dem Gehalt an Flugasche sind die stärksten Variationen in den Al-Konzentrationen zu verzeichnen, welche mit steigendem Gehalt an Flugasche und mit fortschreitender Hydratation ansteigen. Weiterhin ist zu späteren Zeiten Portlandit bei hohen Gehalten an Flugasche zusehends untersättigt, während die Untersättigung bezüglich Strätlingit abnimmt, was auf die Auflösung von Portlandit hinweist. 26. Der absolute Gehalt an SO3 in der Porenlösung wird dominiert von Sulfat (SO42–), während die Konzentrationen von Sulfit (SO32–) und Thiosulfat (S2O32–) sehr niedrig waren. Nach 2 Tagen lagen ca. 90 % des gesamten Schwefels in Form von SO42– vor. Nach 91 Tagen waren dies ca. 36 % während ca. 28 % als S2O32– vorlagen. Bei höheren Gehalten an Hüttensand sind dabei nach 7 Tagen höhere Konzentrationen an SO32– und S2O32– feststellbar. N2 - Problem definition and research objectives 1. The production of Portland cement clinker causes approx. 5% to 8% of the annual man-made CO2 emissions. This is due to the usage of mainly fossil fuel (approx. 40 % of the total CO2) and because of the decarbonation of limestone as a main component of the raw meal (approx. 60 % of the total CO2). 2. Various strategies are applied in order to reduce the green-house gas-emissions, such as optimizing the process of clinker production, the use of alternative fuel and the partial substitution of the clinker in blended cement by so-called SCM (supplementary cementitious materials). Hereby blast-furnace slag, fly ash and limestone are the most used materials. 3. Quaternary systems containing three SCM simultaneously besides Portland cement contribute to the reduction of CO2 emissions due to the decrease of the clinker content. In addition, such systems allow to use blast-furnace slag and fly ash in the most economical way and provide the possibility to account for shortages of SCM on the market. 4. Blast-furnace slag and fly ash show similarities in their principal chemical compositions such that similar hydrates are formed during their reaction in presence of Portland cement. Compared to ternary systems based on blast-furnace slag or fly ash besides limestone, quaternary systems that contain both, blast-furnace slag and fly ash, simultaneously besides limestone, are expected to perform similar in terms of phase assemblage and strength development. 5. The use of SCM as cement replacing materials is limited due to their generally slower reaction compared to neat cement which also leads to lower strength development, especially in the early stage of the hydration up to 28 d. To account for this it is necessary to study the reactivity of SCM such as blast-furnace slag and fly ash in detail in order to develop strategies to enhance the reactivity and thereby the strength development of SCM-containing systems. 6. The early hydration of clinker phases is studied in detail, mainly in diluted systems. It is unclear if processes that were found to control the reaction of such model systems are also prevailing in concentrated cement pastes under realistic water-to-solid ratios. Deeper insight to this aspect is needed to better understand interactions of neat Portland cement and SCM in the first hours of hydration. State-of-the-art 7. Increasing Ca-concentrations lead to decreasing dissolution rates of C3S and C2S in diluted systems. 8. The hydration kinetics of C3S is controlled by the interplay of undersaturation with respect to C3S and oversaturation with respect to C-S-H. 9. Increasing Al-concentrations lead to a retardation of the hydration of C3S. It is unclear if the uptake of aluminum in C-S-H to form C-(A)-S-H which has a significantly lower growth rate than pure C-S-H or a retarding effect of Al on the dissolution of C3S causes this phenomenon. 10. The surface of limestone provides excellent conditions for the nucleation and growth of C-S-H such that significantly more C-S-H nuclei are formed in presence of limestone compared to other SCM. 11. The reactivity of blast-furnace slag and fly ash depends on the particle size as well as on the intrinsic reactivity of especially the amorphous phases. 12. An increase in network modifying oxides (e.g. CaO) in the chemical composition of amorphous (calcium)aluminosilicates leads to an increasingly depolymerized network which in turn causes increasing reactivity. The role of amphoteric oxides (Al2O3, Fe2O3) that can be present as network modifying oxides as well as network forming oxides is not completely solved. 13. CO2-containing AFm-phases are thermodynamically more stable than monosulfoaluminate. This indirectly stabilizes the voluminous ettringite which causes a higher total volume of hydrates and lower porosity whereby higher compressive strength is reached. 14. Only a few percent of limestone in blended cement reacts chemically dependent on the Al2O3 available for reaction. Al2O3 that is provided by the reaction of Portland cement but also by the dissolution of SCM, especially by fly ash, reacts to form hemicarboaluminate which is transformed to monocarboaluminate as the hydration proceeds. Methodology 15. The influence of SCM on the early hydration of Portland cement in binary (including blast-furnace slag or fly ash or limestone or quartz) and ternary (including fly ash and limestone) systems was investigated applying isothermal calorimetry and analysis of the pore solution chemistry. Calculated saturation indices and solubility products of relevant phases were correlated with heat development. Based on the gained data it was reviewed if mechanisms that control the hydration of pure phases in diluted systems are also prevailing in cement pastes under realistic conditions. 16. The influence of the chemical composition of synthetic glasses on their dissolution at high pH was investigated in highly diluted systems using ion chromatography. Pozzolanity tests were conducted on pastes using simplified model systems and glass-blended Portland cements. The process of the glass dissolution was investigated by isothermal calorimetry and by thermogravimetry. Correlation of experimentally determined total bound water with bound water determined by mass balance calculations as a function of amount of glass reacted allowed to estimate the degree of glass reaction in the pastes. Further on selective dissolution experiments were carried out to crosscheck the results of the bound water/mass balance approach. 17. The reaction kinetics of quaternary pastes containing blast-furnace slag and fly ash simultaneously in the presence of limestone were investigated up to 28 d using isothermal calorimetry and chemical shrinkage measurements. In addition strength tests on mortar bars were carried out. 18. Pastes of quaternary blends were also investigated in terms of hydrate assemblage at ages of up to 182 d. Thermodynamic calculations regarding total volume of hydrates as a function of limestone and fly ash/blast-furnace slag content were conducted. The calculations were supported by thermogravimetric determination of bound water and portlandite content as well as qualitative X-ray diffraction. The results were correlated with strength tests on mortar bars. 19. The pore solutions of hydrated quaternary blends were extracted and investigated by means of ion chromatography at ages of up to 728 d. Based on the ion concentrations in the solutions saturation indices were calculated for relevant phases. In order to gain better insight to the blast-furnace slag reaction sulphate speciation was carried out at two blast furnace slag levels (20 and 30 wt.%) for selected samples up to 91 d of hydration and at 91 d for the whole matrix under investigation. Main results 20. Investigations on the early hydration kinetics of binary systems showed a higher heat flow in presence of SCM compared to neat Portland cement. This is caused by the higher surface area that is available for the nucleation of hydrates and by the lower (over)saturation with respect to C-S-H. An increase in the Ca-concentration in the pore solution did not cause lower dissolution rates of C3S as was reported for pure phases in diluted systems. The highest dissolution was observed in the presence of limestone, i.e. at the highest Ca-concentration. The general trend of the reaction rate is inversely related to the degree of undersaturation with respect to C3S. The more undersaturated the faster the observed reaction. The presence of increasing Al-concentrations caused a retardation of the reaction which is in line with investigations on pure phases in diluted systems. Higher sulphate concentrations could be detected for the fly ash containing blend which possibly hindered ettringite precipitation and results in higher Al-concentrations. Correspondingly the low sulphate concentrations lead to lower Al-concentrations in the presence of quartz, blast-furnace slag and limestone compared to fly ash. 21. The early hydration kinetics of quaternary systems is significantly accelerated in the presence of limestone while fly ash leads to retardation. Compared to reference systems containing inert quartz, investigations by means of isothermal calorimetry and chemical shrinkage revealed an acceleration caused by blast-furnace slag. Additions of fly ash, limestone or mixtures thereof introduced another acceleration but differences are too small to be significant and clear distinguishing between the various SCM is not possible. 22. Investigations on the reactivity of synthetic glasses showed that increasing amounts of network modifying oxides caused an increase in reactivity and dissolution rates. The results reveal that Al2O3 acts mainly as network modifying oxide in all investigated glasses. Experimentally determined bound water (thermogravimetric experiments) in model systems and blended cements can be compared with bound water determined by mass balance calculations carried out as a function of the amount of glass reacted. This enables to estimate the degree of glass reaction. 23. The actual content of blast-furnace slag, fly ash or limestone does not exert significant influence on the development of compressive strength up to 7 d. At later ages thermodynamic calculations predict a degree of CaCO3 reaction of 2 to 5 wt.%. This leads to the formation of hemicarbonate and monocarbonate whereby ettringite is indirectly stabilized. As a result the total amount of solids is increased and compressive strength shows a slight maximum. Hereby the degree of CaCO3 reaction depends on the Al2O3 available for reaction which is not only provided by the dissolution of Portland cement but especially by the dissolution of the fly ash. 24. In general the presence of blast-furnace slag and fly ash in the presence of limestone exerts little influence on the hydrate assemblage. The substitution of some of the blast-furnace slag by fly ash leads to a slight decrease of portlandite and C-S-H and gives rise to the formation of more monocarbonate and hemicarbonate. Portlandite is consumed in a pozzolanic reaction with the fly ash whereby C-S-H is formed. However, the low reactivity of the fly ash causes a decrease in the amount of C-S-H formed. Thereby a lower total volume of hydrates is generated which is in line with slightly lower compressive strength in case of increasing fly ash content. The overall influence is small and all systems investigated reach strength class 42.5 N according to EN 196-1. 25. Corresponding to the investigations of the hydrate assemblage the pore solution chemistry of quaternary systems showed only small variations. Depending on the fly ash content the highest variations are observed for aluminium, i.e. increasing fly ash content leads to higher Al-concentrations. Another effect of increasing fly ash contents is an increasing undersaturation with respect to portlandite and a decreasing undersaturation with respect to strätlingite indicating the dissolution of portlandite. 26. The total concentration of sulfur in the pore solution is controlled by sulphate (SO42–) while the concentrations of sulphite (SO32–) and thiosulphate (S2O32–) were very low. Up to 2 d of hydration about 90 % of the total sulphur is present as SO42–. After 91 d this value is reduced to about 36 % while about 28 % are present as S2O32–. In general higher blast-furnace slag content leads to higher concentrations of sulphite and thiosulphate after 7 d. KW - quaternary cement KW - supplementary cementitious materials KW - hydration kinetics KW - Thermodynamic modeling KW - degree of reaction KW - Hydrauliche Bindemittel Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160705-26221 ER - TY - JOUR A1 - Thirioux, Berangere A1 - Wehrmann, Moritz A1 - Langbour, Nicolas A1 - Jaafari, Nematollah A1 - Berthoz, Alain T1 - Identifying One self with the Face of Someone Else Impairs the Egocentered Visuo-spatial Mechanisms: A New Double Mirror Paradigm to Study Self-Other Distinction and Interaction JF - FRONTIERS IN PSYCHOLOGY N2 - Looking at our face in a mirror is one of the strongest phenomenological experiences of the Self in which we need to identify the face as reflected in the mirror as belonging to us. Recent behavioral and neuroimaging studies reported that self-face identification not only relies upon visual-mnemonic representation of ones own face but also upon continuous updating and integration of visuo-tactile signals. Therefore, bodily self-consciousness plays a major role in self-face identification, with respect to interplay between unisensory and multisensory processing. However, if previous studies demonstrated that the integration of multisensory body-related signals contributes to the visual processing of ones own face, there is so far no data regarding how self-face identification, inversely, contributes to bodily self-consciousness. In the present study, we tested whether selfother face identification impacts either the egocentered or heterocentered visuo-spatial mechanisms that are core processes of bodily self-consciousness and sustain selfother distinction. For that, we developed a new paradigm, named Double Mirror. This paradigm, consisting of a semi-transparent double mirror and computer-controlled Light Emitting Diodes, elicits selfother face merging illusory effect in ecologically more valid conditions, i.e., when participants are physically facing each other and interacting. Self-face identification was manipulated by exposing pairs of participants to an Interpersonal Visual Stimulation in which the reflection of their faces merged in the mirror. Participants simultaneously performed visuo-spatial and mental own-body transformation tasks centered on their own face (egocentered) or the face of their partner (heterocentered) in the pre- and post-stimulation phase. We show that selfother face identification altered the egocentered visuo-spatial mechanisms. Heterocentered coding was preserved. Our data suggest that changes in self-face identification induced a bottom-up conflict between the current visual representation and the stored mnemonic representation of ones own face which, in turn, top-down impacted bodily self-consciousness. KW - Gesicht KW - Identifikation KW - bodily self-consciousness; self-face identification; self–other distinction; visuo-spatial mechanisms Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170411-31150 ER - TY - BOOK ED - Bogner, Simone ED - Spiegel, Daniela T1 - Im Kontext N2 - Die etymologische Herkunft des Wortes Kontext findet sich im lateinischen Begriff contexere, bedeutet somit zusammenweben, zusammenflechten. Während die immanente Deutung, z.B. eines Bildes oder einer Architektur, auf formale oder symbolische Aspekte und deren Verbindung zueinander abzielt, wird bei einer kontextuellen Betrachtungsweise der Blick außerhalb des Werkrahmens gelenkt. Etwas im Kontext zu betrachten bestimmt das Verständnis von Äußerungen und Gegenständen, da Zusammenhänge und Beziehungen sichtbar gemacht und aktiv hergestellt werden. Ein umfassenderer Blick wird gewährleistet, der das Objekt vielleicht in einem neuen Licht erscheinen lässt, oder aber auch die dazugehörige Umgebung. Nicht nur der Standpunkt der Betrachtung, auch wie nah oder fern man dem Betrachtungsgegenstand kommt, welchen Ausschnitt man wählt, aus welchem Erfahrungshorizont man an ihn herantritt – all dies beeinflusst letztlich das Ergebnis, sei es einer Deutung oder einer neuen Architektur, eines neuen Stadtteils etc. Der Kontext ist somit kein abgeschlossenes Konstrukt. „Im Kontext“ ist ein Begriff, der gerade in Architektur und Städtebau von zentraler Bedeutung ist, und vielleicht gerade deshalb gewisse Abnutzungserscheinungen zeigt. Die Frage, inwiefern sich Neubauten in den architektonischen, stadträumlichen oder auch naturräumlichen „Kontext“ fügen (sollten), ist ein immer wiederkehrendes Thema in Architektur und Städtebau, über das leidenschaftlich gestritten wird und wurde. Heutzutage, wo es kaum noch Freiflächen gibt, steht alles in irgendeinem Kontext oder soll zumindest in diesem betrachtet werden. Wird in einer (historischen) Stadt eine Lücke geschlossen, so muss sich das Implantat „in den Kontext“ fügen, sei es architektonisch, räumlich, inhaltlich, historisch, konstruktiv, emotional, theoretisch… Hier hat der Kontext sicherlich auch seine Grenzen. Die Suche nach dem genius loci, nach einer Eigenart des Ortes, nach Traditionen und Kontinuität wird an manchen Orten, die bereits, um die berühmte Metapher Freuds zu bemühen, als Palimpsest erscheinen, geradezu zu einem Manierismus. "Im Kontext" darf also durchaus kritisch hinterfragt werden. Doch können wir deshalb auf die Frage nach dem Kontext verzichten? Gerade, wenn in der Gegenwart die historischen Zusammenhänge verloren zu gehen scheinen, wenn Bedeutungen losgelöst werden von ihrem historischen Gewordensein, kann es wichtig sein, diese wieder zu verankern. T3 - HRMagazin. Festgabe für Hans-Rudolf Meier - 2 KW - Stadtforschung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20161110-26972 N1 - Herausgeberkollektiv: Kirsten Angermann, Simone Bogner, Eva von Engelberg-Dockal, Iris Engelmann, Mark Escherich, Katja Hasche, Torben Kiepke, Daniela Spiegel, Kerstin Vogel, Johannes Warda ER - TY - THES A1 - Nanthakumar, S.S. T1 - Inverse and optimization problems in piezoelectric materials using Extended Finite Element Method and Level sets T1 - Inverse und Optimierungsprobleme für piezoelektrische Materialien mit der Extended Finite Elemente Methode und Level sets N2 - Piezoelectric materials are used in several applications as sensors and actuators where they experience high stress and electric field concentrations as a result of which they may fail due to fracture. Though there are many analytical and experimental works on piezoelectric fracture mechanics. There are very few studies about damage detection, which is an interesting way to prevent the failure of these ceramics. An iterative method to treat the inverse problem of detecting cracks and voids in piezoelectric structures is proposed. Extended finite element method (XFEM) is employed for solving the inverse problem as it allows the use of a single regular mesh for large number of iterations with different flaw geometries. Firstly, minimization of cost function is performed by Multilevel Coordinate Search (MCS) method. The XFEM-MCS methodology is applied to two dimensional electromechanical problems where flaws considered are straight cracks and elliptical voids. Then a numerical method based on combination of classical shape derivative and level set method for front propagation used in structural optimization is utilized to minimize the cost function. The results obtained show that the XFEM-level set methodology is effectively able to determine the number of voids in a piezoelectric structure and its corresponding locations. The XFEM-level set methodology is improved to solve the inverse problem of detecting inclusion interfaces in a piezoelectric structure. The material interfaces are implicitly represented by level sets which are identified by applying regularisation using total variation penalty terms. The formulation is presented for three dimensional structures and inclusions made of different materials are detected by using multiple level sets. The results obtained prove that the iterative procedure proposed can determine the location and approximate shape of material subdomains in the presence of higher noise levels. Piezoelectric nanostructures exhibit size dependent properties because of surface elasticity and surface piezoelectricity. Initially a study to understand the influence of surface elasticity on optimization of nano elastic beams is performed. The boundary of the nano structure is implicitly represented by a level set function, which is considered as the design variable in the optimization process. Two objective functions, minimizing the total potential energy of a nanostructure subjected to a material volume constraint and minimizing the least square error compared to a target displacement, are chosen for the numerical examples. The numerical examples demonstrate the importance of size and aspect ratio in determining how surface effects impact the optimized topology of nanobeams. Finally a conventional cantilever energy harvester with a piezoelectric nano layer is analysed. The presence of surface piezoelectricity in nano beams and nano plates leads to increase in electromechanical coupling coefficient. Topology optimization of these piezoelectric structures in an energy harvesting device to further increase energy conversion using appropriately modified XFEM-level set algorithm is performed . KW - Finite-Elemente-Methode KW - Piezoelectricity KW - Inverse problems KW - Optimization problems KW - Nanostructures KW - XFEM KW - level set method KW - Surface effects Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20161128-27095 ER - TY - JOUR A1 - Frisch, Simon ED - Frisch, Simon ED - Orth, Dominik ED - Schmidt, Oliver T1 - Kire – ‚Reine Gewalt‘ im japanischen Film JF - Rabbit Eye - Zeitschrift für Filmforschung N2 - Das japanische Prinzip des Schnittkontinuums (kire-tsuzuki) als Horizont für eine Theorie der filmischen Ästhetik KW - Japanischer Film KW - Schnitt KW - Kire KW - Japan KW - Film KW - Montage Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190508-39001 SP - 79 EP - 97 ER - TY - RPRT A1 - Wiggenbrock, Jens A1 - Smarsly, Kay T1 - Kostengünstiger Breitbandausbau mittels automatisierter Integration von Installationsplänen und Installationskosten N2 - Der Bedarf an leistungsfähigen Hochgeschwindigkeits-Glasfasernetzen ist in den letzten Jahren, insbesondere aufgrund der zunehmenden Nutzung von Internet-basierten Diensten, rapide gestiegen. Eine umfassende Planung von neu zu errichtenden Glasfasernetzen im Sinne eines kostengünstigen Breitbandausbaus ist jedoch häufig mit hohem Aufwand verbunden. Die Auswahl möglicher Kabelwege und die anschließende Kalkulation der Installationskosten werden heute in der Regel durch computerbasierte Verfahren unterstützt, wobei allerdings die Installationspläne und die Installationskosten getrennt voneinander dargestellt werden, was wiederum die computergestützte Planung sowie weitere Optimierungsansätze erschwert. Dieses Arbeitspapier beschreibt ein Konzept für ein modulares Softwaresystem zur computergestützten Planung, Kostenkalkulation und Visualisierung von Glasfasernetzen, das eine integrierte Darstellung von Installationsplänen und Installationskosten ermöglicht. Anstelle der herkömmlichen Darstellung von Installationsplänen, die in der Regel alle geplanten Kabelwege einfarbig auf einer Landkarte visualisiert, wird ein Farbschema zur Anzeige der Installationskosten in Installationsplänen eingesetzt. Das Konzept wird prototypisch implementiert und durch ein Anwendungsbeispiel, das die Planung eines Glasfasernetzes innerhalb eines Siedlungsgebietes behandelt, validiert. Die integrierte, farbige Darstellung der Installationskosten in Installationsplänen ermöglicht eine effiziente Identifikation der kostenintensiven Bauabschnitte und befördert kostenoptimierte Planungsansätze. Die intuitive Visualisierung vereinfacht somit die akkurate und kostenoptimierte Planung von Glasfasernetzen. KW - Visualisierung KW - Kostenoptimierung KW - Breitbandausbau KW - Glasfasernetze KW - Infrastrukturplanung KW - Ampelmodell Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160627-26167 ER - TY - THES A1 - Ulber, Marie T1 - Landschaftsästhetik – Im Verhältnis von Natur und Kultur . Eine Hermeneutik landschaftlicher Atmosphären N2 - In der Ph.D.-Arbeit wird gefragt, wie verschieden gestaltete Landschaften heute erlebt werden und wie sie auf die Menschen wirken. Dafür wird die Atmosphärentheorie erweitert und auf Landschaften angewendet. Atmosphären sind räumliche Stimmungsqualitäten, geprägt von der Umgebung, welche Menschen beeinflussen. Es wird ein Modell entwickelt, welches die Prägung von Atmosphären auf massiver, mobiler und ephemer Ebene beschreibt. Mit künstlerischen Arbeiten werden Atmosphären verschiedener anthropogener Landschaften übersetzt. Mit der exemplarischen wie theoretischen Bearbeitung von landschaftsverbundenen Atmosphären wird die Korrelation von Menschen und Umgebung nachgewiesen. KW - Landschaft KW - Raum KW - Kunst KW - Atmosphäre KW - Ästhetik KW - Stimmung KW - Forschung KW - Befinden Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160215-25291 SP - 1 EP - 6 ER -