TY - JOUR A1 - Xin, Li A1 - Hijazi, Ihab Hamzi A1 - König, Reinhard A1 - Lv, Zhihan A1 - Zhong, Chen A1 - Schmitt, Gerhard T1 - Assessing Essential Qualities of Urban Space with Emotional and Visual Data Based on GIS Technique JF - ISPRS INTERNATIONAL JOURNAL OF GEO-INFORMATION N2 - Finding a method to evaluate people’s emotional responses to urban spaces in a valid and objective way is fundamentally important for urban design practices and related policy making. Analysis of the essential qualities of urban space could be made both more effective and more accurate using innovative information techniques that have become available in the era of big data. This study introduces an integrated method based on geographical information systems (GIS) and an emotion-tracking technique to quantify the relationship between people’s emotional responses and urban space. This method can evaluate the degree to which people’s emotional responses are influenced by multiple urban characteristics such as building shapes and textures, isovist parameters, visual entropy, and visual fractals. The results indicate that urban spaces may influence people’s emotional responses through both spatial sequence arrangements and shifting scenario sequences. Emotional data were collected with body sensors and GPS devices. Spatial clustering was detected to target effective sampling locations; then, isovists were generated to extract building textures. Logistic regression and a receiver operating characteristic analysis were used to determine the key isovist parameters and the probabilities that they influenced people’s emotion. Finally, based on the results, we make some suggestions for design professionals in the field of urban space optimization. KW - Stadt KW - Gefühl KW - Geoinformationssystem KW - urban form; Geographical Information System;walking experience; isovists; logistic regression Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170401-30995 ER - TY - CHAP A1 - Treyer, Lukas A1 - Klein, Bernhard A1 - König, Reinhard A1 - Meixner, Christine T1 - Lightweight urban computation interchange (LUCI) system T2 - Proceedings N2 - In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations. KW - Luci KW - distributed computing KW - middleware Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-25982 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/2504 PB - FOSS4G CY - Seoul, South Korea ER - TY - CHAP A1 - Treyer, Lukas A1 - Klein, Bernhard A1 - König, Reinhard A1 - Meixner, Christine T1 - Lightweight urban computation interchange (LUCI) system T2 - FOSS4G 2015 Conference N2 - In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations. KW - Architektur KW - Informatik KW - Geographie KW - Luci KW - distributed computing KW - middleware Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160118-25042 PB - FOSS4G CY - Seoul, South Korea ER - TY - JOUR A1 - Treyer, Lukas A1 - Klein, Bernhard A1 - König, Reinhard A1 - Meixner, Christine T1 - Lightweight Urban Computation Interchange (LUCI): A System to Couple Heterogenous Simulations and Views JF - Spatial Information Research N2 - In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases, that have been used to test and further develop our concepts and implementations. KW - Middle-ware KW - Design-simulation-loop KW - Computational urban planning KW - Distributed computing KW - Multiple comparative views Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26037 UR - http://link.springer.com/article/10.1007/s41324-016-0025-y SP - 1 EP - 12 ER - TY - JOUR A1 - Schneider, Sven A1 - Braunes, Jörg A1 - Thurow, Torsten A1 - König, Reinhard A1 - Tonn, Christian T1 - Entwerfen Versionieren: Probleme und Lösungsansätze für die Organisation verteilter Entwurfsprozesse N2 - Entwerfen ist ein komplexer Vorgang. Soll dieser Vorgang nicht allein, sondern räumlich verteilt mit mehreren Beteiligten gemeinsam stattfinden, so sind digitale Werkzeuge zur Unterstützung dieses Prozesses unumgänglich. Die Verwendung von Werkzeugen für Ent-wurfsprozesse bedeutet jedoch immer auch eine Manipulation des zu unterstützenden Prozesses selbst. Im Falle von Werkzeugen zur Unterstützung der Kollaboration mehrerer Beteiligter stellen die implementierten Koordinationsmechanismen solche prozessbeeinflussenden Faktoren dar. Damit diese Mechanismen, entsprechend der Charakteristika kreativer Prozesse, so flexibel wie möglich gestaltet werden können, liegt die Anforderung auf technischer Ebene darin, ein geeignetes Konzept für eine nachvollziehbare Speicherung (Versionierung) der stattfindenden Entwurfshandlungen zu schaffen. Der vorliegende Artikel beschäftigt sich mit dem Thema der Entwurfsversionierung in computergestützten kollaborativen Arbeitsumgebungen. Vor dem Hintergrund, dass die Versionierung den kreativen Entwurfsprozess möglichst wenig manipulieren soll, werden technische sowie konzeptionelle Probleme der diskutiert und Lösungsansätze für diese vorgestellt. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 5 KW - CAD KW - Kollaboratives Entwerfen KW - Versionierung KW - computerbasierte Entwurfsprozesse KW - digitale Produktmodellierung KW - Freac. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110414-15439 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - CHAP A1 - König, Reinhard A1 - Varoudis, Tasos T1 - Spatial Optimizations: Merging depthmapX , spatial graph networks and evolutionary design in Grasshopper T2 - Proceedings of ecaade 34: Complexity & Simplicity N2 - In the Space Syntax community, the standard tool for computing all kinds of spatial graph network measures is depthmapX (Turner, 2004; Varoudis, 2012). The process of evaluating many design variants of networks is relatively complicated, since they need to be drawn in a separated CAD system, exported and imported in depthmapX via dxf file format. This procedure disables a continuous integration into a design process. Furthermore, the standalone character of depthmapX makes it impossible to use its network centrality calculation for optimization processes. To overcome this limitations, we present in this paper the first steps of experimenting with a Grasshopper component (reference omitted until final version) that can access the functions of depthmapX and integrate them into Grasshopper/Rhino3D. Here the component is implemented in a way that it can be used directly for an evolutionary algorithm (EA) implemented in a Python scripting component in Grasshopper KW - depthmapx KW - python KW - optimization KW - space syntax KW - grasshopper Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26040 SP - 1 EP - 6 CY - Oulu, Finland ER - TY - CHAP A1 - König, Reinhard A1 - Treyer, Lukas A1 - Schmitt, Gerhard T1 - Graphical smalltalk with my optimization system for urban planning tasks T2 - 31st eCAADe Conference – Volume 2 N2 - Based on the description of a conceptual framework for the representation of planning problems on various scales, we introduce an evolutionary design optimization system. This system is exemplified by means of the generation of street networks with locally defined properties for centrality. We show three different scenarios for planning requirements and evaluate the resulting structures with respect to the requirements of our framework. Finally the potentials and challenges of the presented approach are discussed in detail. KW - Städtebau KW - Architektur KW - Design optimization KW - evolutionary multi-criteria optimization KW - generative system integration KW - interactive planning support system Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25171 SP - 195 EP - 203 PB - TU Delft CY - Delft, Netherlands ER - TY - JOUR A1 - König, Reinhard A1 - Thurow, Torsten A1 - Braunes, Jörg A1 - Donath, Dirk A1 - Schneider, Sven T1 - Technische Einführung in FREAC: A Framework for Enhancing Research in Architectural Design and Communication T1 - Technical introduction to Freac N2 - Im vorliegenden Beitrag wird ein Framework für ein verteiltes dynamisches Produktmodell (FREAC) vorgestellt, welches der experimentellen Softwareentwicklung dient. Bei der Entwicklung von FREAC wurde versucht, folgende Eigenschaften umzusetzen, die bei herkömmlichen Systemen weitgehend fehlen: Erstens eine hohe Flexibilität, also eine möglichst hohe Anpassbarkeit für unterschiedliche Fachdisziplinen; Zweitens die Möglichkeit, verschiedene Tools nahtlos miteinander zu verknüpfen; Drittens die verteilte Modellbearbeitung in Echtzeit; Viertens das Abspeichern des gesamten Modell-Bearbeitungsprozesses; Fünftens eine dynamische Erweiterbarkeit sowohl für Softwareentwickler, als auch für die Nutzer der Tools. Die Bezeichnung FREAC umfasst sowohl das Framework zur Entwicklung und Pflege eines Produktmodells (FREAC-Development) als auch die entwickelten Tools selbst (FREAC-Tools). T3 - Arbeitspapiere Informatik in der Architektur - Nr. 2 KW - CAD KW - Softwareentwicklung KW - Experimentalplattform KW - Produktmodell KW - digitales Gebäudemodell KW - Freac Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:101:1-201105183216 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - Schmitt, Gerhard T1 - New Methods in Urban Analysis and Simulation: Documentation of teaching results from the spring semester 2015 N2 - Documentation of teaching results from the spring semester 2015 at the chair of Information Architecture at ETH Zurich KW - Architektur Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160118-25052 ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - Schmitt, Gerhard T1 - New Methods in Urban Analysis and Simulation: Documentation of teaching results from the autumn semester 2013 N2 - Documentation of teaching results from the autumn semester 2013 at ETH Zurich KW - Städtebau Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25168 ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - Schmitt, Gerhard T1 - New Methods in Urban Analysis and Simulation: Documentation of the teaching results from the spring semester 2014 N2 - Documentation of the teaching results from the spring semester 2014 at ETH Zurich KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25154 ER - TY - RPRT A1 - König, Reinhard A1 - Tapias, Estefania A1 - König, Gerhard T1 - Digital Urban Simulation: Documentation of the teaching results from the fall semester 2014 N2 - Documentation of the teaching results from the fall semester 2014 KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25125 ER - TY - JOUR A1 - König, Reinhard A1 - Standfest, Matthias A1 - Schmitt, Gerhard ED - Thompson, Emine Mine T1 - Evolutionary multi-criteria optimization for building layout planning: Exemplary application based on the PSSA framework JF - 32nd eCAADe Conference - Volume 2 N2 - When working on urban planning projects there are usually multiple aspects to consider. Often these aspects are contradictory and it is not possible to choose one over the other; instead, they each need to be fulfilled as well as possible. Planners typically draw on past experience when subjectively prioritising which aspects to consider with which degree of importance for their planning concepts. This practice, although understandable, places power and authority in the hands of people who have varying degrees of expertise, which means that the best possible solution is not always found, because it is either not sought or the problem is regarded as being too complex for human capabilities. To improve this situation, the project presented here shows the potential of multi-criteria optimisation algorithms using the example of a new housing layout for an urban block. In addition it is shown, how Self-Organizing-Maps can be used to visualise multi-dimensional solution spaces in an easy analysable and comprehensible form. KW - Architektur Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25139 UR - http://cumincad.scix.net/cgi-bin/works/Show?_id=ecaade2014_019&sort=DEFAULT&search=series%3aecaade year%3a2014&hits=132 SP - 567 EP - 574 ER - TY - BOOK A1 - König, Reinhard A1 - Schneider, Sven A1 - Knecht, Katja ED - König, Reinhard ED - Donath, Dirk ED - Petzold, Frank T1 - KREMLAS: Entwicklung einer kreativen evolutionären Entwurfsmethode für Layoutprobleme in Architektur und Städtebau N2 - Die im vorliegenden Buch dokumentierten Untersuchungen befassen sich mit der Entwicklung von Methoden zur algorithmischen Lösung von Layoutaufgaben im architektonischen Kontext. Layout bezeichnet hier die gestalterisch und funktional sinnvolle Anordnung räumlicher Elemente, z.B. von Parzellen, Gebäuden, Räumen auf bestimmten Maßstabsebenen. Die vorliegenden Untersuchungen sind im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Forschungsprojekts entstanden. KW - Grundriss KW - Evolutionärer Algorithmus KW - EDA KW - Entwurfssystem, computerbasiertes Planen, evolutionäre Optimierung, Grundrisse, generative Methoden Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120509-16504 UR - http://infar.architektur.uni-weimar.de/service/drupal-cms/KremlasBuch SN - 978-3-86068-471-9 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER - TY - CHAP A1 - König, Reinhard A1 - Schneider, Sven A1 - Hijazi, Ihab Hamzi A1 - Li, Xin A1 - Bielik, Martin A1 - Schmitt, Gerhard A1 - Donath, Dirk T1 - Using geo statistical analysis to detect similarities in emotional responses of urban walkers to urban space T2 - Sixth International Conference on Design Computing and Cognition (DCC14) N2 - Using geo statistical analysis to detect similarities in emotional responses of urban walkers to urban space KW - Städtebau Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160121-25146 ER - TY - JOUR A1 - König, Reinhard A1 - Schneider, Sven T1 - Nutzerinteraktion bei der computergestützten Generierung von Layouts N2 - Das vorliegende Arbeitspapier beschäftigt sich mit der Thematik der Nutzerinteraktion bei computerbasierten generativen Systemen. Zunächst wird erläutert, warum es notwendig ist, den Nutzer eines solchen Systems in den Generierungsprozess zu involvieren. Darauf aufbauend werden Anforderungen an ein interaktives generatives System formuliert. Anhand eines Systems zur Generierung von Layouts werden Methoden diskutiert, um diesen Anforderungen gerecht zu werden. Es wird gezeigt, dass sich insbesondere evolutionäre Algorithmen für ein interaktives entwurfsunterstützendes System eignen. Es wird kurz beschrieben, wie sich Layoutprobleme durch eine evolutionäre Strategie lösen lassen. Abschließend werden Fragen bezüglich der grafischen Darstellung von Layoutlösungen und der Interaktion mit dem Dargestellten diskutiert. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 8 KW - Interaktion KW - Interaktion, Layouts, generierung Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120509-16524 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - CHAP A1 - König, Reinhard A1 - Schmitt, Gerhard ED - Szoboszlai, Mihály T1 - Backcasting and a new way of command in computational design : Proceedings T2 - CAADence in Architecture Conference N2 - It's not uncommon that analysis and simulation methods are used mainly to evaluate finished designs and to proof their quality. Whereas the potential of such methods is to lead or control a design process from the beginning on. Therefore, we introduce a design method that move away from a “what-if” forecasting philosophy and increase the focus on backcasting approaches. We use the power of computation by combining sophisticated methods to generate design with analysis methods to close the gap between analysis and synthesis of designs. For the development of a future-oriented computational design support we need to be aware of the human designer’s role. A productive combination of the excellence of human cognition with the power of modern computing technology is needed. We call this approach “cognitive design computing”. The computational part aim to mimic the way a designer’s brain works by combining state-of-the-art optimization and machine learning approaches with available simulation methods. The cognition part respects the complex nature of design problems by the provision of models for human-computation interaction. This means that a design problem is distributed between computer and designer. In the context of the conference slogan “back to command”, we ask how we may imagine the command over a cognitive design computing system. We expect that designers will need to let go control of some parts of the design process to machines, but in exchange they will get a new powerful command on complex computing processes. This means that designers have to explore the potentials of their role as commanders of partially automated design processes. In this contribution we describe an approach for the development of a future cognitive design computing system with the focus on urban design issues. The aim of this system is to enable an urban planner to treat a planning problem as a backcasting problem by defining what performance a design solution should achieve and to automatically query or generate a set of best possible solutions. This kind of computational planning process offers proof that the designer meets the original explicitly defined design requirements. A key way in which digital tools can support designers is by generating design proposals. Evolutionary multi-criteria optimization methods allow us to explore a multi-dimensional design space and provide a basis for the designer to evaluate contradicting requirements: a task urban planners are faced with frequently. We also reflect why designers will give more and more control to machines. Therefore, we investigate first approaches learn how designers use computational design support systems in combination with manual design strategies to deal with urban design problems by employing machine learning methods. By observing how designers work, it is possible to derive more complex artificial solution strategies that can help computers make better suggestions in the future. KW - Cognitive design computing KW - machine learning KW - backcasting KW - design synthesis KW - evolutionary optimization KW - CAD Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-25996 SP - 15 EP - 25 CY - Budapest ER - TY - INPR A1 - König, Reinhard A1 - Müller, Daniela T1 - Cellular-Automata-Based Simulation of the Settlement Development in Vienna N2 - The motivation to deal with the topic simulation of the settlement development in a city in the past 120 years has been to acquire general methods for the analysis and simulation of settlement development processes on the one hand and to verify these methods on the example of the real development of the city of Vienna on the other hand. We follow the assumption that the underlying processes of the urban development can be reduced to various pronounced but always the same hidden driving forces. The objective is to validate the simulation model by the real settlement development and to provide a solid base for the simulation of possible development scenarios of the city of Vienna. The basis for the validation are digital cellular processed and statistical analysed data of the development of the technical infrastructure, the public transportation systems and the population density in Vienna between 1888 and 2001. The simulation method is based on the technique of Cellular Automata (CA) that permits the simulation of the interaction between a potential field and the development of individual areas. This modelling technique is well known as “reaction diffusion” or “dialectic breakdown”. The CA serves as representation of the examined space and divides this space into individual cells. Each of these cells can save certain information (population density, infrastructure facility, development quality) and exchange them locally with the neighbouring cells. The used model parameters permit the simulation of different spread patterns und spread speeds of a settlement structure. From the results methodological, structural, spatial and temporal regularities of urban development processes are derived. KW - Computersimulation KW - urban simulation KW - urban modelling KW - vienna Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110415-15449 SN - 978-953-307-230-2 ER - TY - CHAP A1 - König, Reinhard A1 - Müller, Daniela T1 - Simulating the development of residential areas of the city of Vienna from 1888 to 2001 T2 - Compendium of Abstracts of the 8th International Conference on Urban Planning and Environment (UPE8) N2 - The structure and development of cities can be seen and evaluated from different points of view. By replicating the growth or shrinkage of a city using historical maps depicting different time states, we can obtain momentary snapshots of the dynamic mechanisms of the city. An examination of how these snapshots change over the course of time and a comparison of the different static time states reveals the various interdependencies of population density, technical infrastructure and the availability of public transport facilities. Urban infrastructure and facilities are not distributed evenly across the city – rather they are subject to different patterns and speeds of spread over the course of time and follow different spatial and temporal regularities. The reasons and underlying processes that cause the transition from one state to another result from the same recurring but varyingly pronounced hidden forces and their complex interactions. Such forces encompass a variety of economic, social, cultural and ecological conditions whose respective weighting defines the development of a city in general. Urban development is, however, not solely a product of the different spatial distribution of economic, legal or social indicators but also of the distribution of infrastructure. But to what extent is the development of a city affected by the changing provision of infrastructure? As KW - urban simulation KW - Simulation Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26066 CY - Kaiserslautern, Germany ER - TY - JOUR A1 - König, Reinhard A1 - Knecht, Katja T1 - Comparing two evolutionary algorithm based methods for layout generation: Dense packing versus subdivision JF - Artificial Intelligence for Engineering Design, Analysis and Manufacturing N2 - We present and compare two evolutionary algorithm based methods for rectangular architectural layout generation: dense packing and subdivision algorithms.We analyze the characteristics of the two methods on the basis of three floor plan sce- narios. Our analyses include the speed with which solutions are generated, the reliability with which optimal solutions can be found, and the number of different solutions that can be found overall. In a following step, we discuss the methods with respect to their different user interaction capabilities. In addition, we show that each method has the capability to generate more complex L-shaped layouts. Finally,we conclude that neither of the methods is superior but that each of them is suitable for use in distinct application scenarios because of its different properties. KW - Architektur KW - Informatik KW - Kremlas Y1 - 2014 UR - http://www.journals.cambridge.org/abstract_S0890060414000237 N1 - Paper is only available from the journal home page. SP - 285 EP - 299 ER -