TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Tag des Baubetriebs 2004 - Tagungsbeiträge "Planungshaftung in der Bauausführung" N2 - Beiträge zum Tag des Baubetriebs „Planungshaftung in der Bauausführung“ am 16 März 2004 in Weimar der Professur für Baubetrieb und Bauverfahren an der Bauhaus-Universität Weimar. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 06 KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Bauausführung KW - Planungshaftung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081126-14490 ER - TY - JOUR A1 - Abdalla, Jamal T1 - Elements of an Agent-based Mediative Communication Protocol for Design Objects N2 - Integrated structural engineering system usually consists of large number of design objects that may be distributed across different platforms. These design objects need to communicate data and information among each other. For efficient communication among design objects a common communication protocol need to be defined. This paper presents the elements of a communication protocol that uses a mediator agent to facilitate communication among design objects. This protocol is termed the Mediative Communication Protocol (MCP). The protocol uses certain design communication performatives and the semantics of an Agent Communication language (ACL) mainly the Knowledge and Query Manipulation Language (KQML) to implement its steps. Details of a Mediator Agent, that will facilitate the communication among design objects, is presented. The Unified Modeling Language (UML) is used to present the Meditative protocol and show how the mediator agent can be use to execute the steps of the meditative communication protocol. An example from structural engineering application is presented to demonstrate and validate the protocol. It is concluded that the meditative protocol is a viable protocol to facilitate object-to-object communication and also has potential to facilitate communication among the different project participants at the higher level of integrated structural engineering systems. KW - Mehragentensystem KW - Lernendes System KW - Kommunikationsprotokoll Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2207 ER - TY - THES A1 - Adami, Kay T1 - Beitrag zur physikalisch nichtlinearen Analyse von Aussteifungssystemen mit Methoden der mathematischen Optimierung T1 - Physically non-linear analysis of structural systems by methods of mathematical programming N2 - Das Ziel der vorliegenden Arbeit besteht in der Entwicklung einer Strategie zur physikalisch nichtlinearen Analyse von Aussteifungssystemen. Der Anwendungsschwerpunkt umfasst neben dem traditionellen Aufgabenumfang zur Analyse neu zu errichtender Tragwerke gleichzeitig auch Planungsaufgaben, die mit Umbau- und Sanierungsmaßnahmen verbunden sind. Veränderungen, die sich während der Nutzungsgeschichte oder im Revitalisierungsprozess ergeben, werden in den Berechnungsmodellen berücksichtigt. In vielen Fällen ist es aus planerischer Sicht zweckmäßig, die Nichtlinearität des Materialverhaltens zur Erschließung von Tragreserven in den normativen Nachweiskonzepten mit einzubeziehen. Der damit verbundene numerische Aufwand wird durch die Verwendung separater Modelle zur Erfassung des Querschnitts- und des Systemtragverhaltens begrenzt, ohne die Komplexität der Aufgabenstellung zu reduzieren. Aus detaillierten Querschnittsuntersuchungen der Tragwände werden integrale Materialbeziehungen abgeleitet, welche die Grundlage für die nichtlineare Tragwerksanalyse darstellen. Die Modellbildung gegliederter Aussteifungswände basiert auf deren Zerlegung in ebene finite Stabsegmente, die sich durch die Diskretisierung in Längs- und in Querrichtung ergeben. Zusätzlich zu den an den Stabenden angreifenden Normalkräften, Querkräften und Biegemomenten werden an den Elementlängsrändern Schubbeanspruchungen erfasst. Die physikalische Nichtlinearität wird durch die Einbeziehung integraler Materialbeziehungen an den Segmenträndern berücksichtigt. Die numerische Umsetzung erfolgt mit Methoden der mathematischen Optimierung. Die Leistungsfähigkeit der Berechnungsstrategie wird exemplarisch anhand von Untersuchungen an Aussteifungssystemen in Großtafelbauweise nachgewiesen. N2 - In this thesis a strategy to physically non-linear analysis of multi-storey buildings will be developed. With respect to reconstruction and revitalisation the structural system as well as the loadings can be modified. If the determination of internal forces is based on the assumption of linear elastic material behaviour, the bearing capacity of the structural system will be often not checkable. In this context it is reasonable to use models, which include non-linear effects. The investigated wall assemblies are subdivided into elementary wall elements, normally rectangular. At the edges of elements shear forces secures the compatibility between the individual walls. The physically non-linearity will be included by multi-linear material laws. The mechanical problem for determination of internal forces und deformations will be formulate as extremum principle with contraints. The mechanical model presented in this thesis shall be demonstrate on a structural system of large planel structure. KW - Stahlbeton KW - Nichtlineare Berechnung KW - Optimierung KW - Extremalprinzip KW - Revitalisierung KW - Aussteifungssystem KW - Großtafelbauweise KW - physikalisch nichtlinear KW - concrete KW - physically non-linear analysis KW - mathematical programming KW - revitalisation KW - large panel buildings Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040329-812 ER - TY - JOUR A1 - Albert, Andrej A1 - Freischlad, Mark A1 - Pullmann, Torben T1 - Acquisition of Conceptual Design Knowledge in Structural Engineering N2 - Expert systems integrating fuzzy reasoning techniques represent a powerful tool to support practicing engineers during the early stages of structural design. In this context fuzzy models have proved themselves to be very suitable for the representation of complex design knowledge. However their definition is a laborious task. This paper introduces an approach for the design and the optimization of fuzzy systems based upon Genetic Programming. To keep the emerging fuzzy systems transparent a new framework for the definition of linguistic variables is also introduced. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2154 ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Bilek, Jochen T1 - Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures N2 - Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent–peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1481 ER - TY - CHAP A1 - Asayama, Shuichi A1 - Mae, Toshifumi T1 - Fractal Truss Structure and Automatic Form Generation Using Iterated Function System N2 - This paper describes a couple of new truss structures based on fractal geometry. One is the famous Sierpinski Gasket and another is a fractal triangle derived by means of applying a process forming leaves of a cedar tree using M. F. Barnsley’s contraction mapping theory. Therefore a pair of x-y coordinates of an arbitrary nodal point on the structures are generated easily if IFS(Iterated Function System) codes and a scale of them are specified. Structural members are defined similarly. Thus data for frame analysis can be generated automatically, which is significant if the objective structure has complex configuration. Next analytical results under vertical and wind loadings in Japanese Building Code are shown. Here members are assumed to be timber and to have cross section of 15cm×15cm. Finally authors conclude that geometrically new truss structures were developed and automatic data generation for frame analysis was attained using IFS. Analytical results show they contribute to saving material when compared it with King-post truss. KW - Konzipieren KW - Bauwerk KW - Fraktal Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1046 ER - TY - JOUR A1 - Aziz, Zeeshan A1 - Anumba, Chimay A1 - Miles, John T1 - Towards a Semantic Grid Computing Platform for Disaster Management in Built Environment N2 - Current disaster management procedures rely primarily on heuristics which result in their strategies being very cautious and sub-optimum in terms of saving life, minimising damage and returning the building to its normal function. Also effective disaster management demands decentralized, dynamic, flexible, short term and across domain resource sharing, which is not well supported by existing distributing computing infrastructres. The paper proposes a conceptual framework for emergency management in the built environment, using Semantic Grid as an integrating platform for different technologies. The framework supports a distributed network of specialists in built environment, including structural engineers, building technologists, decision analysts etc. It brings together the necessary technology threads, including the Semantic Web (to provide a framework for shared definitions of terms, resources and relationships), Web Services (to provide dynamic discovery and integration) and Grid Computing (for enhanced computational power, high speed access, collaboration and security control) to support rapid formation of virtual teams for disaster management. The proposed framework also make an extensive use of modelling and simulation (both numerical and using visualisations), data mining (to find resources in legacy data sets) and visualisation. It also include a variety of hardware instruments with access to real time data. Furthermore the whole framework is centred on collaborative working by the virtual team. Although focus of this paper is on disaster management, many aspects of the discussed Grid and Visualisation technologies will be useful for any other forms of collaboration. Conclusions are drawn about the possible future impact on the built environment. KW - Mehragentensystem KW - Lernendes System KW - Katastrophenmanagement KW - Software Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2084 ER - TY - CHAP A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Object Oriented Finite Element Analysis for Structural Optimization using p-Elements N2 - The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed. KW - Konzipieren KW - Bauwerk KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1089 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Was ist die richtige Systemantwort auf die sich atomisierende Bauwirtschaft? N2 - Nur durch Aufträge entsteht das Potenzial, die hochwertigen und modernen Produkte, Verfahren und Systeme auch erfolgreich und vielfach in die Realität umzusetzen. Deshalb sind auch im traditionellen Bauwesen die Mechanismen des Marketings für die Akquisition zu analysieren und hinterfragt der Verfasser das Bild von Baubetrieben als kompetente Anbieter für alle Phasen des Bauens vom Baustoff bis zur Inbetriebnahme eines schlüsselfertigen Objektes. Systemanbieter bereiten die Basis für eine innovative und vernetzte Arbeitsweise. KW - Baubetriebslehre KW - Marketing KW - Akquisition KW - Bauwirtschaft Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7161 ER - TY - JOUR A1 - Bargstädt, Hans-Joachim A1 - Blickling, Arno T1 - Effective cost estimate and construction processes with 3D interactive technologies: Towards a virtual world of construction sites N2 - The development of 3D technologies during the last decades in many different areas, leads us towards the complete 3D representation of planet earth on a high level of detail. On the lowest level we have geographical information systems (GIS) representing the outer layer of our planet as a 3D model. In the meantime these systems do not only give a geographical model but also present additional information like ownership, infrastructure and others that might be of interest for the construction business. In future these systems will serve as basis for virtual environments for planning and simulation of construction sites. In addition to this work is done on the integration of GIS systems with 3D city models in the area of urban planning and thus integration of different levels of detail. This article presents research work on the use of 3D models in construction on the next level of detail below the level of urban planning. The 3D city model is taken as basis for the 3D model of the construction site. In this virtual nD-world a contractor can organize and plan his resources, simulate different variants of construction processes and thus find out the most effective solution for the consideration of costs and time. On the basis of former researches the authors present a new approach for cost estimation and simulation using development technologies from game software. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baubetrieb KW - Baustelle KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2320 ER - TY - JOUR A1 - Bargstädt, Hans-Joachim A1 - Blickling, Arno A1 - Kath, Thilo T1 - Optimierung der Planung von Baustelleneinrichtungen mit 3-D-Technologien T1 - Optimization of site layout planning with 3D technologies JF - Hoch- und Tiefbau 1/2-2004, S. 24-27 N2 - Der Einsatz von CAD-Applikationen hat die Planungsarbeit im Bauwesen entscheidend verändert. In der Entwurfsplanung sind die Änderungen bereits deutlich erkennbar. Seit der Anwendung von dreidimensionalen Planungswerkzeugen kann der Bauherr das Bauwerk in seiner virtuellen Gesamtheit am Computer betrachten und bewerten. Dies bietet viele Vorteile. So ist der Planer gezwungen alle wesentlichen Details a priori exakt zu planen, wodurch viele Fehler vermieden werden können. Dies bietet insbesondere für Planungen in Baubetrieben, z.B. im Rahmen der Arbeitsvorbereitung, neue Einsatzmöglichkeiten. N2 - The article describes the use of 3D CAD for the planning of site layouts. The impetus is on crane simulation and movement in order to avoid crane collision during construction process. KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetrieb KW - Baubetriebslehre KW - Baustelleneinrichtung KW - CAD 3D KW - Krankollision KW - 4D Modeling KW - Virtuelle Baustelle KW - virtual construction site KW - virtual environment KW - crane collision Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5599 ER - TY - JOUR A1 - Beer, Daniel G. A1 - Firmenich, Berthold A1 - Richter, Torsten T1 - A Concept for CAD Systems with Persistent Versioned Data Models N2 - The synchronous distributed processing of common source code in the software development process is supported by well proven methods. The planning process has similarities with the software development process. However, there are no consistent and similarly successful methods for applications in construction projects. A new approach is proposed in this contribution. KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Versionsverwaltung KW - CAD Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2046 ER - TY - THES A1 - Berger, Martin T1 - Typologiebildung und Erklärung des Aktivitäten-(Verkehrs-)verhaltens – ein Multimethodenansatz unter Verwendung der Optimal Matching Technik T1 - Classifcation and description of travel-activity behaviour - a multi-method approach under application of the Optimal Matching Technique N2 - Vor dem Hintergrund des gesellschaftlichen Wandels sieht sich die Verkehrsforschung mit neuen Anforderungen an die Konzeption, Anpassung, Anwendung usw. von statistischen Ansätzen zur Analyse des Aktivitäten-(Verkehrs-)verhaltens konfrontiert, um auf Basis empirischer Daten adäquat Zusammenhänge der Verkehrsentstehung zu erforschen. Ausgehend von der musterorientierten Perspektive - das heißt Untersuchungsgegenstand sind chronologische Abfolgen von Ortsveränderungen und Tätigkeiten in Form von Wege-Aktivitätenmustern - besteht das Ziel einer möglichst realitätsnahen Abbildung und Erklärung von individuellen Unterschieden im Raum-Zeit-Verhalten. Neu bzw. kaum etabliert sind in diesem Kontext der eigens konzipierte Multimethodenansatz sowie die Optimal Matching Technik, die erweiterte Abbildungseigenschaften zur Distanzmessung zwischen Wege-Aktivitätenmustern aufweist. Erkannt werden durch jene Methode gleiche Tätigkeiten bzw. Ortsveränderungen, die zeitlich an unterschiedlichen Stellen der zu vergleichenden Muster angeordnet sind sowie identische Subsequenzen. Zielführend in der Datenanalyse ist nachstehende Abfolge von Verfahren: Die Klassifikation von Wege-Aktivitätenmustern zur Reduktionen deren immenser Komplexität gelingt durch Einsatz der Optimal Matching Technik. Diese quantifiziert (Un-)ähnlichkeiten zwischen Wege-Aktivitätenmustern („Abstandsmessung“) unterschiedlicher Personen oder zu vergleichender Zeitabschnitte einer Person. Die dadurch berechnete Distanzmatrix bildet den Ausgangspunkt des clusteranalytischen Fusions-algorithmus, dessen Aufgabe die Zusammenfassung der Wege-Aktivitätenmuster ist (explorative Stufe). Die Anwendung eines multinomialen Logit-Modells ermöglicht auf Individualebene die Vorhersage der Affinität zu Wege-Aktivitätenmuster-Typen anhand von Merkmalswerten identifizierter Erklärungsgrößen der Personen, des Haushaltes usw. (induktive Stufe). Im Gegensatz zu einschlägigen Forschungsarbeiten zeichnet sich die gewählte Untersuchungsstrategie durch die Objektivität des Vorgehens aus, da eine a-priori Bildung von Personen-kategorien nicht notwendig ist. Ebenso grenzt die Berücksichtigung der zufälligen und nicht-erklärbaren Verhaltensvariabilität durch das Wahrscheinlichkeitsprinzip des gewählten Logit-Modells das eigene Vorgehen von anderen Untersuchungen ab. Aufgrund der weitgehend ungeklärten Anwendungsgrundlagen der Optimal Matching Technik befasst sich die vorliegende Arbeit zunächst mit dessen inhaltlicher Ausrichtung am Untersuchungsgegenstand. Die Anpassung der festzulegenden Aufwandswerte, welche für die benötigten Aktionen angesetzt werden, um ein Wege-Aktivitätenmuster in ein anderes zu transformieren, erfolgt mit Hilfe einer empirisch Abschätzung, die weit über ein argumentatives Vorgehen hinausgeht. Der ermittelte Sequenzabstand inkludiert dabei die operationsspezifische Distanz bei Übergängen zwischen den konstituierenden Zuständen der zu vergleichenden Wege-Aktivitätenmuster („Zustandsähnlichkeit“). Abstandsmaß für die qualitativen Zustände ist dabei die ermittelte Priorität von wege- und tätigkeitenbezogenen Handlungen. Die Relevanz einer Ausrichtung belegt auch die durchgeführte Sensitivitätsanalyse: Das Ausmaß der Empfindlichkeit der Optimal Matching Technik ist insbesondere gegenüber der Festlegung der Aufwandswerte beträchtlich. Um die Analysepotenziale des Multimethodenansatzes zu demonstrieren, werden exemplarisch interpersonelle Unterschiede im wöchentlichen Aktivitäten-(Verkehrs-)verhaltens (Datenbasis: deutsches Mobilitätspanel) analysiert. Ergebnis der Klassifikation (explorative Analysestufe) ist eine auf den ersten Blick inhaltlich stichhaltige Wege-Aktivitätenmuster-Typologie charakteristischer Wochenabläufe des Aktivitäten-(Verkehrs-)verhaltens: Unterschiedliche Arten, zeitlicher Umfang und zeitliche Lage der Haupt-aktivitäten, unterschiedliche Verkehrsverhaltensweisen sowie unterschiedliche clusterspezifische Tag zu Tag Rhythmen, Gleichförmigkeiten, Schwankungen usw. des Raum-Zeit-Verhaltens kennzeichnen die Wege-Aktivitätenmuster-Typen. Die Abbildungs-eigenschaften der Optimal-Matching Technik zeichnen sich in den erstellten Clustern nur teilweise ab: Während die Zustandselementkomposition - augenscheinlich betrachtet - passabel durch die Wege-Aktivitätenmuster-Typologie abgebildet wird, bleibt ungewiss, ob und inwieweit dies für die Abfolgeähnlichkeit gilt. Aus dem induktiven Analyseschritt geht hervor: Alter, Geschlecht, Verfügbarkeit einer ÖPNV-Zeitkarte, Führerscheinbesitz und mit herausragender Bedeutung der Erwerbsstatus signalisieren als maßgebende Erklärungsgrößen eine Trennwirkung. Überdies zeigt das Gesamtbild der ermittelten Wirkungsrichtungen und Effektstärken überzeugende Erklärungszusammenhänge auf. Damit ist ein Nachweis der Praktikabilität des eigens konzipierten Multimethodenansatzes unter Verwendung der Optimal Matching Technik zur musterorientierten Analyse des Raum-Zeit-Verhaltens erbracht. N2 - Social change is reflected in more and more complex individual travel-activity behaviour, which can be represented as travel-activity patterns. The analytical classification of travel activty-pattern into groups and the description of the travel activty-pattern types is an important issue to travel-activty behaviour analysis for a long time. A realistic measure between individual travel-activity patterns is the basis for the analysis and the description of differences in travel-activity behaviour. In the centre of the multi-method-approach stands the practical application of the so-called Optimal Matching Technique. This approach is adapted, tested and applied. This method involves the element composition - identical activities and trips in both travel-activity patterns, which are arranged in different positions - and the element order - the identical order of activities and trips in both travel-activity patterns. The multi-method approach contains the following basic components: Classification of the travel-activity pattern: Statistical analysis starts with the most important point: the application of the Optimal Matching Technique. This sequence alignment method quantifies dissimilarities between travel-activity patterns in the form of distances. While conventional distance measures for sequences compare only elements of the same position, the Optimal Matching Technique extends the ability to measure the degree of differences between sequences. The result of the application of the Optimal Matching Technique is a symmetrical distance matrix, in which dissimilarity scores for the travel-activity patterns pairs are specified. As a second step, the purpose of the application of the cluster analysis is to classify the travel-activity pattern based on the calculated distance matrix of the Optimal Matching Technique Description of the travel-activity pattern types: The identification of variables, which explain the affinity to a travel-activity pattern type as independent variables, forms the main function of the last methodological step. For this problem, the use of a multinomial logit model is appropriate, because this method allows a determination of influences of different explanatory variables on a dependent, categorial variable. The explanatory model results in statements of probability for a person with personal, household and spatial characteristics to realize travel-activity pattern types. The multi-method approach is characterised by a direct strategy, which guarantees a high level of objectivity. Further on a probabilistic causal relation between person type and travel-activity pattern type is appropriate on the background of social change. The statistical methods for cluster analysis and the logit model are “state of the practice”. Only the new method Optimal Matching Technique will be described closer. For the application of the Optimal Matching Technique a priori assumptions must be made for the ”cost” of the transformation operation, which is a key issue of the method. The criteria of priority is introduced as a measure for states and changes in states for activities and trips. Testing the sensitivity of the results of the Optimal Matching Technique depends on the definition of “cost”. It can be concluded that there is a strong influence on travel-activity pattern distances. The multi-method approach is applied in an exemplary manner both to classify weekly travel-activity pattern and to describe the travel-activity pattern types. The empirical data-base is the German Mobility Panel (MOP). The classification results in a seven cluster solution of weekly travel-activity pattern types, which can be interpreted in a plausible way. It can be shown, that the approach of comparing activity-travel pattern based on the Optimal Matching Technique captures the element composition. It remains uncertain if and how far this succeeds to the element order. The seven travel-activity pattern types can be described in terms of sociodemographic characteristics ("age", “gender” and "status of employment"), “driving licence” and “discount public transport”. There is evidence that the multi-method-approach under application of the Optimal Matching Technique is a useful tool to analyse travel-activity behaviour KW - Verkehrsverhalten KW - Typenbildung KW - Sequenzanalyse KW - Abstandsmessung KW - Cluster-Analyse KW - Logit-Modell KW - Optimal Matching Technik KW - travel behavior KW - typology KW - similarity measurement KW - Optimal Matching Technique KW - cluster analysis KW - logit-model Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041115-2108 ER - TY - CHAP A1 - Berkhahn, Volker A1 - Kinkeldey, Christoph A1 - Schleinkofer, Matthias T1 - Re-Engineering Based on Construction Drawings - From Ground Floor Plan to Product Model N2 - For the management or reorganisation of existing buildings, data concerning dimensions and construction are necessary. Often these data are given exclusively by paper-based drawings and no digital data such as a computer based product model or even a CAD-model are available. In order to perform mass calculation, damage mapping or a recalculation of the structure these drawings of the building under consideration have to be analysed manually by the engineer. This is a very time-consuming job. In order to close this gap between drawings of an existing building and a digital product model an approach is presented in this paper to digitise a drawing, to build up geometric and topologic models and to recognise construction parts of the building. Finally all recognised parts are transformed into a three-dimensional geometric model which provides all necessary geometric information for the product model. During this import process the semantics of a ground floor plan has to be converted into a 3D-model. KW - Architektur KW - Verteiltes System KW - Dreidimensionales CAD KW - Produktmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1832 ER - TY - THES A1 - Berninger, Anna Maria T1 - Mikrostrukturelle Eigenschaften von Quarz als Bestandteil spät reagierender, alkaliempfindlicher Zuschläge T1 - Microstructure of quartz as a component of slow-late-aggregate N2 - Zwischen den Jahren 1920 und 1930 kam es an der kalifornischen Küste zu Bauschäden an Brücken und Fahrbahnen, die sich vor allem in einer deutlichen Rissbildung äußerten. Seither werden immer wieder Bauschäden beschrieben, deren Ursache in der Reaktion von Zuschlägen, die „reaktive“ Kieselsäure enthalten, mit der Porenlösung des Betons zu sehen ist. Diese Reaktion wird als Alkali-Kieselsäure Reaktion (AKR) bezeichnet. Seit der ersten Veröffentlichung von Stanton über die „alkali-aggregate reaction“ an opalhaltigen Zuschlägen sind hunderte von Forschungsarbeiten zu diesem Thema durchgeführt und deren Ergebnisse veröffentlicht worden. Trotz eingehender Forschung seit mehr als 8o Jahren ist weder der Mechanismus der AKR vollständig geklärt noch eine eindeutige Voraussage über die Gefährdung von Bauwerken oder Bauteilen mit potentiell AKR-empfindlichen Zuschlägen möglich. Das liegt vor allen Dingen daran, das es sich bei der AKR um eine Reaktion handelt, die aus einer komplexen Abfolge chemischer und physikalischer Prozesse besteht, die in ihrer Gesamtheit zu einer Schädigung von Beton bzw. Betonbauteilen und Bauwerken führen können. Eine geschlossene Beschreibung und Behandlung dieser Reaktion ist nicht möglich, solange keine befriedigende Kenntnis über den Ablauf der einzelnen Schritte vorliegt. Dazu bedarf es grundsätzlicher Untersuchungen der einzelnen chemischen und physikalischen Reaktionsschritte sowie einer möglichst quantitativen Bewertung der verschiedenen Einflussfaktoren. Grundsätzlich gibt es weltweit eine ganze Reihe von Richtlinien und Normen , die dazu verhelfen sollen, Schädigungen an Bauwerken durch AKR zu verhindern. In Deutschland ist das momentan gültige Regelwerk die sogenannte Alkali-Richtlinie des deutschen Ausschusses für Stahlbeton (DAfStb). Sie dient zur Beurteilung von Zuschlag nach DIN 4226 [6, 7, 8] mit alkaliempfindlichen Bestandteilen. Dabei bezieht sich der Teil 2 der Richtlinie auf Zuschläge mit Opalsandstein, Kieselkreide und Flint aus bestimmten Gewinnungsgebieten. Hier wird eine reine Zuschlagprüfung gefordert. Teil 3 der Richtlinie bezieht sich auf präkambrische Grauwacken und andere alkaliempfindliche Gesteine. Gefordert werden hier Prüfungen der Zuschläge selbst sowie Prüfung an Betonbalken und 30er Würfeln in der Nebelkammer. Für die meisten in der Richtlinie genannten Zuschläge bilden die Prüfungen und Vorschriften eine ausreichende Sicherheit, um eine AKR zu vermeiden. Dennoch treten immer wieder Schäden mit Zuschlägen auf, die nach der Alkali-Richtlinie als unempfindlich eingestuft werden müssten. Dabei handelt es sich in der Regel um Schadensfälle, die erst nach mehreren Jahren mit spät reagierenden AKR-empfindlichen Zuschlägen auftreten. Zu diesen Zuschlägen, die gegebenenfalls speziell im Nebelkammertest innerhalb von neun Monaten keine signifikante Dehnung (<0,6mm/m) aufweisen, gehören Stressquarze, Kieselkalk, Granit, Porphyr, Kieselschiefer und Grauwacke. Die vorliegende Arbeit dient speziell der Beurteilung und Einordnung von unterschiedlichen kristallinen Quarzmodifikationen sowie der Ermittlung geeigneter Untersuchungsmethoden für die Beurteilung der AKR-Empfindlichkeit von Quarz. N2 - A lot of concrete deterioration due to ASR during the last years show, that it was not possible to estimate truly the al-kali-reactivity of aggregate. Also a true forecast, if a special concrete mixture or a building is insensible to ASR is not possible. The reason is, that there are damages especially with slow-late aggregates (greywacke, quartzite, rhyolite, stressed quartz…), although they were estimated as innocuous using the valid test methods. For getting more and true information about the ASR sensitivity of slow-late aggregates, interrelations between micro-structural properties and solubility were investigated. In special cases where is a good correlation between microstructure and solubility. But there are a lot of other influences. So only for a part of the investigated aggregates it is possible to get a good correla-tion. Thin section investigations, using light microscopy show, that the microstructure allows a prognosis how and where cracking will occur. KW - Quarz KW - Mikrostruktur KW - Alkali-Kieselsäure-Reaktion KW - slow-late-aggregate KW - alkali-silica-reaktion KW - microstructure KW - strain KW - stress Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050310-4494 ER - TY - CHAP A1 - Beyer, Hartmut T1 - Sondervorschläge und Alternativen mit allen Konsequenzen N2 - Der Verfasser begründet zunächst die aktive Erarbeitung von Sondervorschlägen und Alternativen. Im zweiten Abschnitt erfolgt die inhaltliche Strukturierung der Nebenangebote. Im Folgenden werden die Probleme beim Durchsetzen der Sondervorschläge bei der öffentlichen Hand und privaten Auftraggebern und als Alternative dazu das STRABAG teamconcept beschrieben. Im letzten Bereich wird die Verantwortung des Bauunternehmens unterstrichen und ein positives Resümee gezogen. KW - Baubetriebslehre KW - Ausschreibung KW - Öffentlicher Auftrag / Vergabe KW - Angebot KW - Angebotsbearbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7207 ER - TY - CHAP A1 - Biltchouk, Irina A1 - Pahl, Peter Jan T1 - Interaction of Data Bases and Graphical Interfaces in Civil Engineering N2 - Applications for civil engineering tasks usually contain graphical user interfaces for the engineering processes. Persistent objects of the applications are stored to data bases. The influence of the interaction between a graphical user interface and a data base for the development of an civil engineering application is investigated in this paper. A graphic application for the linear elastic analysis of plane frames, which was previously developed with standard tools of the Java platform, is compared to a redesigned implementation using a generalized data base for persistent objects. The investigation leads to the following results : - A strict distinction between persistent and transient objects influences the class structure of an application, in particular the class structure of a graphical user interface. - The structure of an application depends on the logic for updating of references to persistent and transient graphical objects after an application is read from a file. - The complexity of the reference management can usually be handled better by just in time referencing associated with String - identifiers rather than by automated referencing associated with Name - identifiers. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Graphische Benutzeroberfläche KW - Datenbank Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1636 ER - TY - THES A1 - Bock, Sebastian T1 - Approximation mit polynomialen Lösungen der Laméschen Differentialgleichung T1 - Approximation with Polynomial Solutions of Lamé Differential Equation N2 - Grundidee der Arbeit ist es, Lösungen von Randwertaufgaben durch Linearkombinationen exakter klassischer Lösungen der Differentialgleichung zu approximieren. Die freien Koeffizienten werden dabei durch die Bestimmung der besten Approximation der Randwerte berechnet. Als Basis der Approximation werden vollständige orthogonale und nahezu orthogonale Funktionensysteme verwendet. Anhand ausgewählter Beispiele mit Randvorgaben unterschiedlicher Glattheit wird am Beispiel der Kugel die prinzipielle Anwendbarkeit der Methode getestet und hinsichtlich der Entwicklung des Fehlers der Näherungslösung, der Stabilität des Verfahrens und des numerischen Aufwandes untersucht. Die erhaltenen Resultate geben einen begründeten Anlass, die Anwendung der Methode als Bestandteil einer hybriden analytisch-numerischen Methode, insbesondere der Verknüpfung mit der FEM, weiterzuverfolgen. KW - Legendre-Funktion KW - Lamé-Gleichung KW - Festkörpermechanik KW - Orthonormalbasis KW - Beste Approximation KW - Fourier-Reihe KW - Hyperholomorphe-Funktion KW - spherical harmonics KW - Lamé-equation KW - continuum mechanic KW - complete orthonormal system KW - best approximation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6409 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - CHAP A1 - Both, Petra von A1 - Kohler, Niklaus A1 - Gessmann, Robin T1 - A virtual life cycle structured platform for building applications N2 - The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data. KW - Bauwerk KW - Datenmanagement KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1219 ER - TY - CHAP A1 - Boukamp, Frank A1 - Akinci, Burcu T1 - Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications N2 - This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system. KW - Bauwerk KW - Datenmanagement KW - Modellierung KW - Norm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1315 ER -