TY - THES A1 - Nariman, Nazim T1 - Numerical Methods for the Multi-Physical Analysis of Long Span Cable-Stayed Bridges N2 - The main categories of wind effects on long span bridge decks are buffeting, flutter, vortex-induced vibrations (VIV) which are often critical for the safety and serviceability of the structure. With the rapid increase of bridge spans, research on controlling wind-induced vibrations of long span bridges has been a problem of great concern.The developments of vibration control theories have led to the wide use of tuned mass dampers (TMDs) which has been proven to be effective for suppressing these vibrations both analytically and experimentally. Fire incidents are also of special interest in the stability and safety of long span bridges due to significant role of the complex phenomenon through triple interaction between the deck with the incoming wind flow and the thermal boundary of the surrounding air. This work begins with analyzing the buffeting response and flutter instability of three dimensional computational structural dynamics (CSD) models of a cable stayed bridge due to strong wind excitations using ABAQUS finite element commercial software. Optimization and global sensitivity analysis are utilized to target the vertical and torsional vibrations of the segmental deck through considering three aerodynamic parameters (wind attack angle, deck streamlined length and viscous damping of the stay cables). The numerical simulations results in conjunction with the frequency analysis results emphasized the existence of these vibrations and further theoretical studies are possible with a high level of accuracy. Model validation is performed by comparing the results of lift and moment coefficients between the created CSD models and two benchmarks from the literature (flat plate theory) and flat plate by (Xavier and co-authors) which resulted in very good agreements between them. Optimum values of the parameters have been identified. Global sensitivity analysis based on Monte Carlo sampling method was utilized to formulate the surrogate models and calculate the sensitivity indices. The rational effect and the role of each parameter on the aerodynamic stability of the structure were calculated and efficient insight has been constructed for the stability of the long span bridge. 2D computational fluid dynamics (CFD) models of the decks are created with the support of MATLAB codes to simulate and analyze the vortex shedding and VIV of the deck. Three aerodynamic parameters (wind speed, deck streamlined length and dynamic viscosity of the air) are dedicated to study their effects on the kinetic energy of the system and the vortices shapes and patterns. Two benchmarks from the literature (Von Karman) and (Dyrbye and Hansen) are used to validate the numerical simulations of the vortex shedding for the CFD models. A good consent between the results was detected. Latin hypercube experimental method is dedicated to generate the surrogate models for the kinetic energy of the system and the generated lift forces. Variance based sensitivity analysis is utilized to calculate the main sensitivity indices and the interaction orders for each parameter. The kinetic energy approach performed very well in revealing the rational effect and the role of each parameter in the generation of vortex shedding and predicting the early VIV and the critical wind speed. Both one-way fluid-structure interaction (one-way FSI) simulations and two-way fluid-structure interaction (two-way FSI) co-simulations for the 2D models of the deck are executed to calculate the shedding frequencies for the associated wind speeds in the lock-in region in addition to the lift and drag coefficients. Validation is executed with the results of (Simiu and Scanlan) and the results of flat plate theory compiled by (Munson and co-authors) respectively. High levels of agreements between all the results were detected. A decrease in the critical wind speed and the shedding frequencies considering (two-way FSI) was identified compared to those obtained in the (one-way FSI). The results from the (two-way FSI) approach predicted appreciable decrease in the lift and drag forces as well as prediction of earlier VIV for lower critical wind speeds and lock-in regions which exist at lower natural frequencies of the system. These conclusions help the designers to efficiently plan and consider for the design and safety of the long span bridge before and after construction. Multiple tuned mass dampers (MTMDs) system has been applied in the three dimensional CSD models of the cable stayed bridge to analyze their control efficiency in suppressing both wind -induced vertical and torsional vibrations of the deck by optimizing three design parameters (mass ratio, frequency ratio and damping ratio) for the (TMDs) supporting on actual field data and minimax optimization technique in addition to MATLAB codes and Fast Fourier Transform technique. The optimum values of each parameter were identified and validated with two benchmarks from the literature, first with (Wang and co-authors) and then with (Lin and co-authors). The validation procedure detected a good agreement between the results. Box-Behnken experimental method is dedicated to formulate the surrogate models to represent the control efficiency of the vertical and torsional vibrations. Sobol's sensitivity indices are calculated for the design parameters in addition to their interaction orders. The optimization results revealed better performance of the MTMDs in controlling both the vertical and the torsional vibrations for higher mode shapes. Furthermore, the calculated rational effect of each design parameter facilitates to increase the control efficiency of the MTMDs in conjunction with the support of the surrogate models which simplifies the process of analysis for vibration control to a great extent. A novel structural modification approach has been adopted to eliminate the early coupling between the bending and torsional mode shapes of the cable stayed bridge. Two lateral steel beams are added to the middle span of the structure. Frequency analysis is dedicated to obtain the natural frequencies of the first eight mode shapes of vibrations before and after the structural modification. Numerical simulations of wind excitations are conducted for the 3D model of the cable stayed bridge. Both vertical and torsional displacements are calculated at the mid span of the deck to analyze the bending and the torsional stiffness of the system before and after the structural modification. The results of the frequency analysis after applying lateral steel beams declared that the coupling between the vertical and torsional mode shapes of vibrations has been removed to larger natural frequencies magnitudes and higher rare critical wind speeds with a high factor of safety. Finally, thermal fluid-structure interaction (TFSI) and coupled thermal-stress analysis are utilized to identify the effects of transient and steady state heat-transfer on the VIV and fatigue of the deck due to fire incidents. Numerical simulations of TFSI models of the deck are dedicated to calculate the lift and drag forces in addition to determining the lock-in regions once using FSI models and another using TFSI models. Vorticity and thermal fields of three fire scenarios are simulated and analyzed. The benchmark of (Simiu and Scanlan) is used to validate the TFSI models, where a good agreement was manifested between the two results. Extended finite element method (XFEM) is adopted to create 3D models of the cable stayed bridge to simulate the fatigue of the deck considering three fire scenarios. The benchmark of (Choi and Shin) is used to validate the damaged models of the deck in which a good coincide was seen between them. The results revealed that the TFSI models and the coupled thermal-stress models are significant in detecting earlier vortex induced vibration and lock-in regions in addition to predicting damages and fatigue of the deck and identifying the role of wind-induced vibrations in speeding up the damage generation and the collapse of the structure in critical situations. KW - Stabilität KW - Brückenbau KW - Aerodynamic Stability KW - Vortex Induced Vibration KW - Fluid-Structure Interaction KW - Mass Tuned Damper KW - Thermal Fluid-Structure Interaction Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171122-37105 ER - TY - THES A1 - Lehmkuhl, Hansjörg T1 - Zur praktischen Anwendung numerischer Analysemethoden für Stabilitätsprobleme T1 - The application of numerical methods to stability problems in practice N2 - In der täglichen Ingenieurpraxis werden in zunehmenden Maße numerische Analysen im Rahmen der Finite-Elemente-Methode auch zur Untersuchung stabilitätsgefährdeter Strukturen eingesetzt. Für die aktuelle Praxis, insbesondere im konstruktiven Stahlbau, ist jedoch festzustellen, dass zwischen der fortgeschrittenen Theorie und dem Niveau der praktischen Anwendung numerischer Stabilitätsanalysen eine große Kluft besteht. Aus praktischer Sicht erscheint es unumgänglich, die weiter wachsende Diskrepanz zwischen den umfangreichen theoretischen Möglichkeiten und der gegenwärtigen Praxis abzubauen. Damit steht der praktisch tätige Ingenieur vor der Aufgabe, sein Wissen auf dem Gebiet numerischer Stabilitätsanalysen zu vertiefen und bereits vorhandene FE-Programme um Berechnungsalgorithmen für umfassende numerische Stabilitätsanalysen zu erweitern. Dafür werden in der Arbeit die Grundlagen einer FEM- orientierten modernen Stabilitätstheorie einheitlich und aus Sicht einer praktischen Anwendung aufbereitet. Die Darstellung von realisierten programmtechnischen Umsetzungen für erweiterte Analysenmethoden wie Nachbeulanalysen, Pfadwechsel und Approximationen imperfekter Pfade ermöglicht eine Erweiterung des Methodenvorrates. Die innerhalb der Arbeit untersuchten Beispiele zeigen, dass durch die Anwendung der behandelten Verfahren das Tragverhalten einer stabilitätsgefährdeten Struktur wesentlich besser eingeschätzt werden kann als bei Beschränkung auf die herkömmlichen Analysemethoden. N2 - The daily engineering practice is characterized by an increasing use of numerical analyses also for structures influenced by stability problems. However it must be noticed that in practice, especially in steel construction, exists a large gap between the advanced stability theory and the level of practical applications of numerical stability analyses. From a practical point of view it seems be absolutely necessary to break up the continual growing discrepancy between comprehensive theoretical possibilities and current practice. Therefore practical engineers have to deepen their knowledge on the field of numerical stability analyses and have to expand existing finite element programs with special algorithms. For this purpose basics of a finite element orientated modern stability theory are presented from the view of practical application. Furthermore steps are shown for programming special methods like post-buckling analyses, path switching and approximations for load-deformation pathes including imperfections. The importance of the additional methods for a better understanding of the structures stability behaviour clearly comes out by the presentation of different examples of practical relevance. KW - Nichtlineare Stabilitätstheorie KW - Finite-Elemente-Methode KW - Stabilität KW - Stahlbau KW - Imperfektion KW - Nachbeulverhalten KW - Schale KW - Non-linear buckling KW - Finite Element Method KW - stability theory KW - post-buckling analysis KW - koiter approximation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20051013-7102 ER - TY - THES A1 - Masarira, Alvin T1 - Beitrag zu Ermittlung der Gesamtstabilitaet von Hallenrahmen unter Beruecksichtigung der konstruktiven Gestaltung von Rahmenecken T1 - The Stability of Steel Frames under the Consideration of the Influence of the Design and Construction of Frame Joints N2 - Die in der Praxis häufig vorkommenden Rahmenecken werden zur Ermittlung ihrer Wölb- und Drehsteifigkeiten untersucht. Die Kontinui- tätsbedingungen dafür werden formuliert. Mit Finite- Schalenelementen werden Gesamthallenrahmen mit unterschiedlichen Abmessungen, Profilen, Dachneigungen, Stabilisierungen und Rahmeneck- formen modelliert. Dadurch werden die Auswirkungen und Einflüsse der Rahmeneckkonstruktion auf die Stabilität des Tragwerkes untersucht. Durch vergleichende Untersuchungen mit dem Ersatzstabverfahren nach der DIN 18800 werden für jede Rahmenecke realitätsnahe ßo- und ßz Werte vorgeschlagen. N2 - Common joint types are investigated in order to determine their warping and bending restraints. Continuity conditions for warping of the joints are formulated. Using an FE-Shellmodel whole frames with different dimensions, section profiles, roof slopes, bracing systems and joints are designed and calculated. The objective is to detremine the effect of joint construction on the critical loads for flexural-torsional buckling of the system. Through comparative investigations of the critical loads using the equivalent member method of the German standards for steel structures, it is possible to assign to each joint type relatively accurate ßo- and ßz coefficients. KW - Rahmentragwerk KW - Rahmenecke KW - Profilstahl KW - Tragfähigkeit KW - Stabilität KW - Stahlbau KW - Woelbsteifigkeit KW - Knotenmodell KW - Gabellagerung KW - Bimomente KW - Kontinuitaetsbedingungen KW - Steel frames KW - Joint type KW - Warping stiffness KW - Warping moments KW - Stability behavior Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040311-712 ER - TY - THES A1 - Witter, Ralph T1 - Auswirkungen einer künstlichen Destratifikation auf die thermischen und hydrodynamischen Verhältnisse in der Bleilochtalsperre N2 - Es werden die Auswirkungen der mit Hilfe eines Blasenschleiers durchgeführten partiellen Destratifikation zur Begrenzung der Algenentwicklung durch Lichtlimitierung auf die thermischen und hydrodynamischen Bedingungen in der Bleilochtalsperre (Thüringen) vorgestellt. Ausgangspunkt bilden die theoretischen Betrachtungen zur Dynamik eines Blasenschleiers, aus denen ein Blasenschleiermodell in einer geschichteten Umgebung hervorgeht. Weiterhin werden die dimensionslosen Kennzahlen der Quell- und der Umgebungsschichtungsstärke, sowie der entdimensionalisierten Einblastiefe eingeführt, mit denen die Dynamik der voll ausgebildeten Schleierströmung beschreibbar ist. Durch Kopplung des Blasenschleiermodells mit einem Umgebungsschichtungsmodell wird die mechanische Effizienz eines Blasenschleiers auf die Destratifikation einer linearen Umgebungsschichtung für einen großen Bereich der Kennzahlen ermittelt und die Leistungsfähigkeit des in der Bleilochtalsperre installierten Schleiers theoretisch nachgewiesen. Die Auswirkungen des Betriebs des Blasenschleiers in der Bleilochtalsperre selbst werden anhand von gemessenen Temperaturprofilen diskutiert und über Stabilitätsberechnungen quantifiziert. Dabei kam es in den Sommermonaten in der Talsperre zur Ausbildung eines 3-Schichtensystems, über dessen Entstehung im Weiteren eine Ursachenanalyse durchgeführt wird. Es werden Untersuchungen zum Einschichtungsverhalten des Zulaufs, zum zeitlichen Verlauf der Temperaturentwicklung in der Talsperre, Isothermenabsenkungsberechnungen für den Bereich unterhalb des Schleiers, Wärmehaushaltsberechnungen und in der Talsperre durchgeführte Driftkörpermessungen vorgestellt, die das Auftreten des 3-Schichtensystems erklären. Angaben über die wesentlichen Auswirkungen der künstlichen Destratifikation auf die limnologischen Verhältnisse in der Talsperre runden die Ergebnisse der hydrodynamischen Untersuchungen schließlich ab. KW - Bleilochtalsperre KW - Algen KW - Wasserlinsendecken KW - Hypertrophie KW - Wachstumshemmung KW - Belüftung KW - Lichtlimitation KW - Destratifikation KW - Blasenschleier KW - mechanische Effizienz KW - Stabilität Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040310-629 ER - TY - THES A1 - Schorling, York T1 - Beitrag zur Stabilitätsuntersuchung von Strukturen mit räumlich korrelierten geometrischen Imperfektionen N2 - Für geometrisch imperfekte Strukturen wird die Versagenswahrscheinlichkeit bezüglich Stabilitätskriterien bestimmt. Eine probabilistische Beschreibung der geometrischen Imperfektionen erfolgt mit skalaren ortsdiskretisierten Zufallsfeldern. Die Stabilitätsberechnungen werden mit der Finite Elemente Methode durchgeführt. Ausgangspunkt der Berechnung ist eine systematische Formulierung probabilistisch gewichteter Imperfektionsformen durch eine Eigenwertzerlegung der Kovarianzmatrix. Wenn mit einer strukturmechanisch orientierten Sensitivitätsanalyse ein Unterraum zur näherungsweisen Beschreibung des probabilistischen Strukturverhaltens gefunden wird, kann die Versagenswahrscheinlichkeit numerisch sehr effizient durch ein Interaktionsmodell bestimmt werden. Es zeigte sich, daß dies genau dann möglich ist, wenn die Beulform merklich im Imperfektionsfeld enthalten ist. Die Imperfektionsform am Bemessungspunkt entspricht dann, unabhängig vom Lastniveau, gerade der Beulform. Wenn die Beulform im Imperfektionsfeld einen untergeordneten Beitrag liefert, erscheint eine Reduktion des stochastischen Problems auf wenige Zufallsvariablen dagegen nicht möglich. N2 - The thesis presents a concept for reliability analysis of geometrical imperfect structures with respect to static stability criteria. The geometrical imperfections are modeled as Gaussian random fields. The structural analysis is based on the Finite Element Method. A spectral decomposition of the covariance matrix, enables to formulate independent probabilistically weighted imperfections shapes, which may be analyzed by means of structural mechanics. Reliability calculations with procedures such as the response surface method require the reduction of the random variable space. Examples proved that a suitable definition of a subspace of the random variable space is possible, if the buckling shapes are sufficiently included in the random field. In this case the imperfection shape is-independent of the load level-identical to the buckling shape. In contrast if the buckling shapes are not included in the random field, the structure shows a wide banded behavior. Consequently a reduction of the variable space and the application of an interaction models is then not feasible for the determination of the failure probabilty. KW - Tragwerk KW - Formabweichung KW - Stabilität KW - Beulung KW - Zuverlässigkeit KW - Finite-Elemente-Methode KW - Imperfektion KW - Berechnung KW - Stochastik KW - Zufallsfeld Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040216-317 ER -