TY - CHAP A1 - Abramian, A. K. T1 - Superelliptic Shells as new constructive Forms N2 - In the superelliptic shell joined to a circular cylinder bending stresses are absent when it is subjected to uniform pressure.Some geometrical characteristics have been found. Expressions for determining stresses in the shell crest(in the singular point of plane type) are suggested. The problem of a theoretical critical buckling load of an elongated shell supported by frames is studied. A critical buckling load for two shells with different specifications was found experimentally. KW - Schale KW - Ellipsoid KW - Beulung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4347 ER - TY - CHAP A1 - Adamski, A. A1 - Bryniarska, Z. T1 - Schedule Synchronisation in public Transport by Tabu Search and Genetic Method N2 - This paper concerns schedule synchronization problems in public transit networks. In particular, it consists of three main parts. In the first the subject area is introduced, the terms are defined and framework for optimal synchronization in the form of problem representation and formulation is proposed. The second part is devoted to transfer synchronization problem when passengers changing transit lines at transfer points. The intergrated Tabu Search and Genetic solution method is developed with respect to this specific problem. The third part deals with headways harmonization problem i.e. synchronization of different transit lines schedules on a common segments of routes. For the solution of this problem a new bilevel optimization method is proposed with zones harmonization at the bottom level and co-ordination of zones, by time buffers assigned to timing points, at the upper level. Finally, the synchronization problems are numerically illustrated by real-life examples of the public transport lines in Cracow. KW - Öffentlicher Personennahverkehr KW - Verkehrsnetz KW - Synchronisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4146 ER - TY - JOUR A1 - Allen, Stan T1 - After mechanical reproduction N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/61-64 KW - Architektur KW - Technologie KW - Fiktion KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11686 ER - TY - JOUR A1 - Bakurova, A. V. A1 - Perepelitsa, V. A. A1 - Zin'kovskaya, J. S. T1 - Research of Stability of Vector Problem of spanning Tree with topological Criteria N2 - A multicriterial statement of the above mentioned problem is presented. It differes from the classical statement of Spanning Tree problem. The quality of solution is estimated by vector objective function which contains weight criteria as well as topological criteria (degree and diameter of tree). Many real processes are not determined yet. And that is why the investigation of the stability is very important. Many errors are connected with calculations. The stability analysis of vector combinatorial problems allows to discover the value of changes in the initial data for which the optimal solution is not changed. Furthermore, the investigation of the stability allows to construct the class of the problems on base of the one problem by means of the parameter variations. Analysis of the problems with belong to this class allows to obtaine axact and adecuate discription of model KW - Spannender Baum KW - Vektorfunktion KW - Stabilität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5159 ER - TY - CHAP A1 - Bannwart, E. T1 - "CyberCity" - die Stadt im Kopf N2 - >CyberCity< ist ein Konzept, das durch ein virtuelles Abbild der räumlichen Realität einer Stadt (Berlin) eine uns bekannte Wahrnehmungsumgebung als Orientierungs- und Navigationserleichterung bereitstellt, um über diesen virtuellen Browser möglichst schnell und anschaulich an eine gewünschte Information zu kommen. Dieses Umgebungsmodell ist auch als Simulationsmodell für die Visualisierung stadträumlicher Beurteilungen neuer Projekte, verkehrstechnischer Massnahmen und ökologischer Belastungen geeignet. Insbesondere ist es als Orientierungsumgebung für die Telepräsenz über die Kommunikationsnetze gedacht, die über die virtuellen Repräsentanten (Avatare) eine besondere gesellschaftliche Brisanz erhält. KW - Stadtplanung KW - Virtuelle Realität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4247 ER - TY - JOUR A1 - Barkow, Frank A1 - Leibinger, Regine T1 - Rituals of Disaster : technology and representation N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/159-161 KW - Architektur KW - Technologie KW - Fiktion KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11577 ER - TY - JOUR A1 - Bartels, Olaf T1 - Geschichte(n) im Nebel : Architekten als Techniker der Vernichtung im "3. Reich" ; die Bauten der AVIA-Flugmotorenfabrik in Prag als alltägliches Beispiel (Architekten: Godbeer Nissen und Hermann Henselmann) N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/377-380 KW - Nissen KW - Godber KW - Henselmann KW - Hermann KW - Architektur KW - Nationalsozialismus KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11877 ER - TY - JOUR A1 - Bauer, Klaus-Jürgen T1 - Serien ohne Modelle : Architektur gefühlsecht N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/317-321 KW - Architektur KW - Minimalismus KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11827 ER - TY - THES A1 - Bauer, Klaus-Jürgen T1 - Minima Aesthetica - Banalität als Stragegische Subversion der Architektur N2 - Die europäische Gegenwartsarchitektur, die sich exemplarisch etwa in Arbeiten von Herzog & deMeuron, Adolf Krischanitz oder Rem Kohlhaas manifestiert, verbindet eine Beziehung zum Gewöhnlichen, Alltäglichen, Banalen. Diese Beziehung ist unklar und problematisch, da üblicherweise Architektur auf der einen Seite und Banalität auf der anderen Seite einander ausschliessende Begriffspaare bezeichnen. Diese Hinwendung der Architektur zum Gewöhnlichen entwickelt sich historisch als ein Modell, welches Gewöhnlichkeit als ethisches Prinzip etabliert, das unabdingbar mit der Entwicklung der Kultur verbunden ist. Besonders im zwanzigsten Jahrhundert werden solcherart einflußreiche Alternativen zu einer Architektur des Besten, Größten und Schönsten vorgestellt. Der Regelfall für die Beurteilung der Beziehungen zwischen Architektur und Banalität ist allerdings die Kritik der Banalität. Hier gibt es zwei hauptsächliche Kritikmuster, nämlich die Kritik von Banalität als Bedeutungslosigkeit und die Kritik der Banalität als Wertlosigkeit. Problematisch ist eine Kritik der Banalität dann, wenn sie objektorientiert argumentiert, anstatt Interpretationsmodelle zu untersuchen, da in Gegenständen keine Bedeutungen liegen, sondern nur Unterschiede, die es dem Betrachter möglich machen, ihnen Bedeutung zuzuschreiben. Genauso wie eine objektorientierte Kritik an Banalität nicht zielführend sein kann, so sind auch Versuche, eine Ästhetik des Banalen zu begründen, fragwürdig. Ein Kunstwerk oder auch Architektur definiert sich nicht über seine Neutralität, sondern über seine Differenz zum Alltäglichen, Gewöhnlichen, Banalen. Eine Wechselwirkung zwischen Architektur und Banalität ist also nur über die Effekte des Gewöhnlichen untersuchbar, da das Gewöhnliche selbst uninterpretiert und unsichtbar bleiben muß. Entscheidend ist letztlich die Frage, auf welche Art Architektur Banalität für ihre Transformationen benützt. Ein Erklärungsmodell ist der Kantsche Begriff des Parergon, der zeigt, wie sich Architektur durch Ränder, das Sekundäre, das Gewöhnliche konstituiert. Das Parergon ist dabei subversiv und sinister, weil es die herkömmliche Einheit der Architektur zerstört. Letztlich also ist die Annäherung der zeitgenössischen Architektur an die Banalität eine subversive Differenzierungsstrategie, mit der durch scheinbare Nähe größtmögliche Distanzierung erreicht wird. KW - Architektur / Ästhetik KW - Alltäglichkeit KW - Normalität KW - Loos KW - Adolf KW - banal KW - europäische Architektur Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040220-414 ER - TY - CHAP A1 - Berger, Hans A1 - Graeff-Weinberg, K. T1 - FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-Übergangselementen N2 - Detailuntersuchungen an Tragwerken führen bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. Während in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gewählt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des Übergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-Übergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits über nur eine Stufe erzielen läßt. Diese neu entwickelten sogenannten pNh-Elemente ermöglichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten für h-Verfeinerung). Das wird durch N stückweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht äquidistant sein braucht. Darüber hinaus ist es möglich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der Übergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung läßt sich dies besonders günstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit Übergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten Übergangselementkonzeptes umfassend demonstriert. KW - Tragwerk KW - Modellierung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4267 ER - TY - JOUR A1 - Berkowski, P. A1 - Boron, Jacek T1 - An Algorithm of compromise structural Optimisation of Bar Structures N2 - Authors' own research in applied unicriterial and multicriterial optimisation of bar structures, and also an analysis of accessible bibliography on structural synthesis allows to present herein an attempt to define a general algorithm for proceeding in formulation of a structural optimisation problem. A practical aspect of such an algorithm consists, in author's opinion, in enabling a designer a correct creation of a mathematical model of synthesis problems, independently of known mathematical methods employed to looking for an unconditional extremum of function of several variables. A proposed algorithm is not a ready-for-use tool for solving all the optimisation problems, but it constitutes an easy-to-expand theoretical basis. This basis should allow a designer to create a proper set of compromises on the way to construct a mathematical model of a specific optimisation problem. The algorithm, presented in the paper, is constructed as a sequence of the one-after-another problem questions, on which the designer answers: yes or no, and a set of selections from the knowledge base consisting of the elements of an optimisation problem components. The order of making questions adopted by the authors in the algorithm is subjective, however it is supported by their experience, both in applied optimisation and in designing of structures like trusses or frames. KW - Stabwerk KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5264 ER - TY - CHAP A1 - Beucke, Karl T1 - Entwicklung der Bauinformatik in Deutschland N2 - Die Informatik im Bauwesen oder kurz Bauinformatik hat sich in den vergangenen Jahren in Deutschland kontinuierlich entwickelt und sie hat einen festen Platz in den Fakultäten im Bauingenieurwesen an den deutschen Universitäten erhalten. Diese Entwicklung war anfänglich sehr stark fixiert auf die Berechnungen des physikalischen Verhaltens von Bauwerken. In den letzten Jahren kamen weitere Gebiete hinzu. Hier ist vor allem die Zeichnungserstellung (CAD) hervorzuheben. Diese Entwicklungen haben einen großen Reifegrad erlangt und sie haben einen festen Platz in Lehre und Forschung in der Bauinformatik. Die Rolle der Bauinformatik allgemein hat in den letzten Jahren eine stürmische Entwicklung genommen. Die Breite der Anwendungen hat ständig zugenommen und die Forderung nach einer durchgängigen Nutzbarkeit aller Informationen, die in diesem Zusammenhang bearbeitet werden, wird immer stärker gestellt. Besonders zwei Problemstellungen stehen im Mittelpunkt vieler Entwicklungen in der Bauindustrie und in den entsprechenden Softwarehäusern. Dies sind die Entwicklung und Nutzung technischer Modelle zur Unterstützung des Bauprozesses und die Unterstützung betriebswirtschaftlicher Anforderungen in der Bauindustrie. Vor allem die zweite Anforderung war bisher kaum Gegenstand der Bauinformatik. Aktuelle Bestrebungen vor allem aus der Praxis wirken darauf hin, diesen Zustand zu ändern. Die Fakultät Bauingenieurwesen an der Bauhaus-Universität beginnt diesen Anforderungen dadurch Rechnung zu tragen, daß kontinuierlich die notwendigen Voraussetzungen geschaffen werden, um diese Thematik in Lehre und Forschung kompetent aufnehmen zu können. Externe Referenten, die an der Spitze entsprechender Entwicklungen sind, werden in die Lehre mit eingebunden. Dies soll eine kontinuierliche Weiterentwicklung einleiten, die helfen soll, eine zeitgemäße Ausbildung der zukünftigen Bauingenieure sicherzustellen. KW - Bauwesen KW - Informatik KW - Betriebswirtschaft Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4233 ER - TY - JOUR A1 - Bollerey, Franziska T1 - Über das Mögliche hinausdenken : zur heutigen Rezeption des Utopischen Sozialismus N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/45-52 KW - Frühsozialismus KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11640 ER - TY - JOUR A1 - Brock, Ingrid T1 - Wiederaufbau nach dem 2. Weltkrieg - Erhaltung des Status quo heute : Die Paulskirche in Frankfurt am Main (mit Hinweisen zur Alten Pinakothek und Glyptothek in München und zum Germanischen Nationalmuseum in Nürnberg) JF - Thesis // Wissenschaftliche Zeitschrift der Bauhaus-Universität Weimar ; Jg. 43.1997, H. 5 N2 - Vortrag im Rahmen der Jahrestagung des Arbeitskreises Theorie und Lehre der Denkmalpflege e.V. im September 1996 in Köln mit dem Thema: Wiederaufgebaute und neugebaute Architektur der 1950er Jahre - Tendenzen ihrer "Anpassung" an unsere Gegenwart. T3 - Thesis // Bauhaus-Universität - 43.1997,5/10-41 KW - Denkmalpflege Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131122-20757 SP - S. 10 EP - S. 41 ER - TY - JOUR A1 - Bucher, Christian A1 - Schorling, York T1 - SLang - the Structural Language : Solving Nonlinear and Stochastic Problems in Structural Mechanics N2 - Recent developments in structural mechanics indicate an increasing need of numerical methods to deal with stochasticity. This process started with the modeling of loading uncertainties. More recently, also system uncertainty, such as physical or geometrical imperfections are modeled in probabilistic terms. Clearly, this task requires close connenction of structural modeling with probabilistic modeling. Nonlinear effects are essential for a realistic description of the structural behavior. Since modern structural analysis relies quite heavily on the Finite Element Method, it seems to be quite reasonable to base stochastic structural analysis on this method. Commercially available software packages can cover deterministic structural analysis in a very wide range. However, the applicability of these packages to stochastic problems is rather limited. On the other hand, there is a number of highly specialized programs for probabilistic or reliability problems which can be used only in connection with rather simplistic structural models. In principle, there is the possibility to combine both kinds of software in order to achieve the goal. The major difficulty which then arises in practical computation is to define the most suitable way of transferring data between the programs. In order to circumvent these problems, the software package SLang (Structural Language) has been developed. SLang is a command interpreter which acts on a set of relatively complex commands. Each command takes input from and gives output to simple data structures (data objects), such as vectors and matrices. All commands communicate via these data objects which are stored in memory or on disk. The paper will show applications to structural engineering problems, in particular failure analysis of frames and shell structures with random loads and random imperfections. Both geometrical and physical nonlinearities are taken into account. KW - Baustatik KW - Nichtlineares Phänomen KW - Zufallsvariable KW - Programm Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4957 ER - TY - JOUR A1 - Böhm, Wolfgang T1 - Die Stadt und der Fortschritt : ein Gedanke N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 43.1997,1-2/99-107 KW - Stadtentwicklung KW - Fortschritt KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11768 ER - TY - JOUR A1 - Caetano, A. M. T1 - Eigenvalue Distribution for the Stokes Operator N2 - The aim of this talk is to show that the methods used by Métivier and Lapidus to study the eigenvalue distribution of elliptic operators (e.g., of the Dirichlet Laplacian) can be adapted to the study of the similar problem for the Stokes operator. In this way we get asymptotic formulae for the eigenvalues of the latter operator even in the case when the underlying domain has an extremely irregular (fractal) boundary. In the case the boundary is not that irregular (e.g., when it is Lipschitz) the estimates we obtain are much better than the ones we can find in the current literature. KW - Stokes-Problem KW - Eigenwert Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5005 ER - TY - CHAP A1 - Christov, Christo T. A1 - Petrova, Lyllia B. T1 - Computer-Aided Static Analysis of Complex Prismatic Orthotropic Shell Structures by the Analytical Finite Strip Method N2 - The paper describes a development of the analytical finite strip method (FSM) in displacements for linear elastic static analysis of simply supported at their transverse ends complex orthotropic prismatic shell structures with arbitrary open or closed deformable contour of the cross-section under general external loads. A number of bridge top structures, some roof structures and others are related to the studied class. By longitudinal sections the prismatic thin-walled structure is discretized to a limited number of plane straight strips which are connected continuously at their longitudinal ends to linear joints. As basic unknowns are assumed the three displacements of points from the joint lines and the rotation to these lines. In longitudinal direction of the strips the unknown quantities and external loads are presented by single Fourier series. In transverse direction of each strips the unknown values are expressed by hyperbolic functions presenting an exact solution of the corresponding differential equations of the plane straight strip. The basic equations and relations for the membrane state, for the bending state and for the total state of the finite strip are obtained. The rigidity matrix of the strip in the local and global co-ordinate systems is derived. The basic relations of the structure are given and the general stages of the analytical FSM are traced. For long structures FSM is more efficient than the classic finite element method (FEM), since the problem dimension is reduced by one and the number of unknowns decreases. In comparison with the semi-analytical FSM, the analytical FSM leads to a practically precise solution, especially for wider strips, and provides compatibility of the displacements and internal forces along the longitudinal linear joints. KW - Tragwerk KW - Schale KW - Orthotropes Bauteil KW - CAD KW - Finite-Streifen Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4358 ER - TY - CHAP A1 - Contensin, M. A1 - Maltret, J.-L. T1 - Computer Aided Lighting for architects and designers N2 - Designing lightings in a 3D-scene is a general complex task for building conception as it is submitted to many constraints such as aesthetics or ergonomics. This is often achieved by experimental trials until reaching an acceptable result. Several rendering softwares (such as Radiance) allow an accurate computation of lighting for each point in a scene, but this is a long process and any modification requires the whole scene to be rendered again to get the result. The first guess is empirical, provided by experience of the operator and rarely submitted to scientific considerations. Our aim is to provide a tool for helping designers to achieve this work in the scope of global illumination. We consider the problem when some data are asked for : on one hand the mean lighting in some zones (for example on a desktop) and on the other hand some qualitative information about location of sources (spotlights on the ceiling, halogens on north wall,...). The system we are conceiving computes the number of light sources, their position and intensities, in order to obtain the lighting effects defined by the user. The algorithms that we use bind together radiosity computations with resolution of a system of constraints. KW - Architektur KW - Beleuchtung KW - CAD Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4488 ER - TY - THES A1 - Coulon, Carl-Helmut T1 - Strukurorientiertes Fallbasiertes Schließen T1 - Structure oriented case based reasoning N2 - Das Ziel dieser Arbeit war es, durch Verwendung geeigneter vorhandener CAD-Pläne die Bearbeitung neuer CAD-Pläne zu unterstützen. Entstanden ist ein generischer Ansatz zum fallbasierten Schließens. Da in CAD-Plänen die räumliche Struktur eine wichtige Rolle spielt, ist das Konzept auf strukturorientierte Anwendungen ausgerichtet. Deshalb bezeichne ich es als ein Konzept zum " strukturorientierten fallbasierten Schließen". Die Arbeit spezifiziert das Minimum an Wissen, welches zur Suche und Wiederverwendung von Fällen benötigt wird, wie das darüber hinausgehende Wissen verarbeitet wird, welche Zusammenhänge es zum Beispiel zwischen Vergleichs- und Anpassungswissen gibt und wie man das Wissen modellieren kann. Zur Erläuterung wird das benötigte Wissen anhand verschiedener Anwendungen dargestellt. Das in der Arbeit vorgestellte Konzept erlaubt die Ergänzung, Detaillierung und Korrektur einer Anfrage. Die beiden entscheidenden Algorithmen dienen dem Vergleich von Anfrage und Fall und der Anpassung der Information des Falles zur Modifikation der Anfrage. N2 - The task of this thesis was the computer supported reuse of known CAD-designs in order to create new CAD-designs. The developed solution contains a generic approach to case based reasoning. Due to the relevance of spatial structures in CAD-designs the approach focusses on structure oriented applications. Therefore it is called an approach for „structure oriented case based reasoning". This thesis specifies the kind of the minimum knowledge required for retrieval and reuse of cases, how to integrate additional knowledge, relations between knowledge needed for comparision and adaption and how to model the knowledge. For illustration the required knowledge is described for different applications. The developed concept allows to extend, detail and correct a given query. The two most important algorithms are used to compare cases and query and to reuse the information found in a case to modify a query. KW - Fallbasiertes Schließen KW - Bauplanung KW - CAD KW - Problemlösen KW - Wissensmodellierung KW - Strukturvergleich KW - Anpassung KW - Knowledge modelling KW - comparison of structure KW - adaption Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040212-265 ER -