TY - THES A1 - Ansari, Meisam T1 - Simulation methods for functional and microstructured composite materials T1 - Simulationsmethoden für funktionalisierte und mikrostrukturierte Verbundwerkstoffe N2 - In this thesis, a generic model for the post-failure behavior of concrete in tension is proposed. A mesoscale model of concrete representing the heterogeneous nature of concrete is formulated. The mesoscale model is composed of three phases: aggregate, mortar matrix, and the Interfacial Transition Zone between them. Both local and non-local formulations of the damage are implemented and the results are compared. Three homogenization schemes from the literature are employed to obtain the homogenized constitutive relationship for the macroscale model. Three groups of numerical examples are provided. N2 - In dieser Arbeit wird ein generisches Modell für das nichtlineare Materialverhalten des Betons unter Spannung vorgeschlagen. Ein Mesoskalenmodell wird aufgebildet, welches die heterogene Materialstruktur des Betons darstellt. Das Mesoskalenmodell besteht aus drei Phasen: groben Zuschlägen, Mörtelmatrix und Übergangszone zwischen Zuschlag und Matrix. Es werden sowohl die lokale als auch die nichtlokale Formulierung des Schädigungsgrades implementiert und die Ergebnisse verglichen. Drei Homogenisierungsmethoden aus der Literatur werden verwendet, um die homogenisierte konstitutive Beziehung für das Makroskalenmodell zu erhalten. Drei Gruppen von numerischen Beispielen werden angeführt. KW - Simulation KW - Verbundwerkstoff KW - Beton KW - Meso-Scale KW - Composite KW - Concrete Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201103-42783 ER - TY - JOUR A1 - Ansari, Meisam A1 - Tartaglione, Fabiola A1 - Könke, Carsten T1 - Experimental Validation of Dynamic Response of Small-Scale Metaconcrete Beams at Resonance Vibration JF - materials N2 - Structures and their components experience substantially large vibration amplitudes at resonance, which can cause their failure. The scope of this study is the utilization of silicone-coated steel balls in concrete as damping aggregates to suppress the resonance vibration. The heavy steel cores oscillate with a frequency close to the resonance frequency of the structure. Due to the phase difference between the vibrations of the cores and the structure, the cores counteract the vibration of the structure. The core-coating inclusions are randomly distributed in concrete similar to standard aggregates. This mixture is referred to as metaconcrete. The main goal of this work is to validate the ability of the inclusions to suppress mechanical vibration through laboratory experiments. For this purpose, two small-scale metaconcrete beams were cast and tested. In a free vibration test, the metaconcrete beams exhibited a larger damping ratio compared to a similar beam cast from conventional concrete. The vibration amplitudes of the metaconcrete beams at resonance were measured with a frequency sweep test. In comparison with the conventional concrete beam, both metaconcrete beams demonstrated smaller vibration amplitudes. Both experiments verified an improvement in the dynamic response of the metaconcrete beams at resonance vibration. KW - Beton KW - metaconcrete KW - Schwingungsdämpfung KW - damping aggregate KW - vibration absorber KW - free vibration test KW - frequency sweep test Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230818-64154 UR - https://www.mdpi.com/1996-1944/16/14/5029 VL - 2023 IS - volume 16, issue 14, article 5029 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ansari, Meisam A1 - Zacharias, Christin A1 - Könke, Carsten T1 - Metaconcrete: An Experimental Study on the Impact of the Core-Coating Inclusions on Mechanical Vibration JF - materials N2 - Resonance vibration of structures is an unpleasant incident that can be conventionally avoided by using a Tuned Mass Damper (TMD). The scope of this paper contains the utilization of engineered inclusions in concrete as damping aggregates to suppress resonance vibration similar to a TMD. The inclusions are composed of a stainless-steel core with a spherical shape coated with silicone. This configuration has been the subject of several studies and it is best known as Metaconcrete. This paper presents the procedure of a free vibration test conducted with two small-scaled concrete beams. The beams exhibited a higher damping ratio after the core-coating element was secured to them. Subsequently, two meso-models of small-scaled beams were created: one representing conventional concrete and the other representing concrete with the core-coating inclusions. The frequency response curves of the models were obtained. The change in the response peak verified the ability of the inclusions to suppress the resonance vibration. This study concludes that the core-coating inclusions can be utilized in concrete as damping aggregates. KW - Beton KW - Schwingungsdämpfung KW - metaconcrete KW - damping aggregate KW - vibration absorber Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230315-49370 UR - https://www.mdpi.com/1996-1944/16/5/1836 VL - 2023 IS - Volume 16, Issue 5, article 1836 SP - 1 EP - 18 PB - MDPI CY - Basel ER - TY - THES A1 - Bode, Kay-André T1 - Aspekte der kohäsiven und adhäsiven Eigenschaften von PCC T1 - Aspects of cohesive and adhesive properties of PCC N2 - Die Abkürzung PCC bezieht sie sich hier auf Polymer modified Cement Concrete, also mit Kunststoffen modifizierte Mörtel und Betone. Hierfür hat sich diese Abkürzung auch international durchgesetzt. Sie bezeichnet Baustoffe, die neben dem mineralischen Bindemittel Zement auch Kunststoffe enthalten. Zement und Kunststoff erzielen im späteren Mörtel bzw. Beton eine gemeinschaftliche Bindemittelwirkung. Wiederholter Gegenstand von Schadensfällen ist das Versagen des Haftverbundes zu anderer Bausubstanz. Da PCC häufig als dünne Schutzschicht auf vorhandenen Beton aufgetragen werden, führt ein Versagen der Adhäsion früher oder später auch zu einem Versagen dieser Schutzfunktion. Umgekehrt kann ein Versagen des Schutzes infolge von Rissen im PCC auch im Nachhinein zum Ablösen der Beschichtung führen. Ursächlich für dieses kohäsive Versagen sind dabei i. d. R. die Auswahl falscher bzw. nicht aufeinander abgestimmter Baustoffsysteme oder schlicht Verarbeitungsfehler. Das Ziel dieser Arbeit war es zu untersuchen, welchen Einfluss die kohäsiven und adhäsiven Eigenschaften von PCC auf deren Dauerhaftigkeit, insbesondere bei der Anwendung als Beschichtungsmaterial, haben. Dazu wurden vier maßgebliche Schwerpunkte bearbeitet. Eine zentrale Rolle für die Dauerhaftigkeit eines Beschichtungsmaterials spielt dessen Längenänderungsverhalten. Der Betrag der positiven und negativen Längenänderungen ist bestimmend für die Spannungen, die im Beschichtungsmaterial entstehen können. Sind die auftretenden Spannungen höher als die Zugfestigkeit des PCC erfolgt der Spannungsabbau durch Risse. Es kommt also zum Kohäsionsversagen im Mörtel. Wird der PCC als Beschichtungsmaterial genutzt, werden die Spannungen im Idealfall über die Verbundebene zum Beschichtungsuntergrund übertragen. Übersteigen dabei diese Spannungen die maximal aufnehmbaren Verbundspannungen, kommt es zum Adhäsionsversagen zwischen Beschichtung und Untergrund. In Modellversuchen werden die Effekte des Längenänderungsverhaltens kunststoffmodifizierter Zementsteine auf den Haftverbund zu einer Gesteinskörnung untersucht. Dadurch werden Rückschlüsse auf die Kohäsion innerhalb der PCC durch die Beschreibung des adhäsiven Verbundes zwischen Zementsteinmatrix und Gesteinskörnung gezogen. Neben der Längenänderung sind auch die Festigkeitseigenschaften der PCC bedeutsam für deren Dauerhaftigkeit. Es werden die Festigkeitseigenschaften kunststoffmodifizierter Mörtel und Betone nicht nur von der mechanischen Seite betrachtet. Der Focus liegt vielmehr auf der Beschreibung der durch die Kunststoffe beeinflussten kohäsiven Eigenschaften bei mechanischer Belastung. Es wird das Verhalten der polymeren Matrix nach einer Kurzzeitbelastung untersucht. Damit werden die Vorgänge, die letztlich zu einer Beeinflussung der Festigkeitseigenschaften führen, dargestellt. In diesem Zusammenhang wird auch der Einfluss der Temperatur auf die Festigkeit der PCC betrachtet. Die Untersuchung des Frost-Taumittel-Widerstandes mittels CDF- bzw. CIF-Verfahrens ist eine gute Möglichkeit, neben der Beurteilung der Dauerhaftigkeit auch Rückschlüsse auf die kohäsiven als auch, im mikroskopischen Maßstab betrachtet, die adhäsiven Eigenschaften der PCC zu ziehen. Damit ist gemeint, dass die Kohäsion von PCC durch deren adhäsive Eigenschaften zwischen kunststoffmodifizierter Zementsteinmatrix und Gesteinskörnern maßgeblich bestimmt wird. Einerseits kann bei starkem Abfall des relativen dynamischen E-Moduls von einer geringeren Kohäsion des PCC ausgegangen werden. Dies würde dann bei einem Mörtel eher zu Rissen führen, über die wiederum betonaggressive Medien eindringen können. Im Gegensatz dazu deutet ein konstant bleibender relativer dynamischer E-Modul auf eine hohe Kohäsion und damit, bei Anwendung des PCC als Beschichtungsmaterial, auf ein höheres adhäsives Versagensrisiko der Beschichtung hin. Andererseits stellt eine höhere Abwitterung, also sozusagen das schichtenweise kohäsive Versagen, eine Gefahr bei dünnen Beschichtungen dar. Dies könnte noch durch die Anwendung anderer Taumittel (z. B. organischer) verstärkt werden. Unter diesen Gesichtspunkten wurden Untersuchungen auf der Basis des CDF-Testes sowie zur Lösungsaufnahmefähigkeit der PCC durchgeführt. Der adhäsive Verbund von PCC zu Beton ist von vielen Faktoren abhängig. Bisher kaum betrachtet wurde die Art des Aufbringens oder der Einfluss der Probengeometrie bei Laborversuchen. Diese sowie der Einfluss einer Salzbelastung des Untergrundes bzw. der Beschichtung wurden untersucht. Ein Teil der durchgeführten Untersuchungen wurde im Rahmen des Teilprojektes B3 „Dauerhaftigkeit polymermodifizierter Mörtel und Betone“ des von der DFG geförderten Sonderforschungsbereiches 524 „Werkstoffe und Konstruktionen für die Revitalisierung von Bau-werken“ realisiert. N2 - Polymers were often combined with cementious mixtures to optimise different properties, e. g. the workability, the durability, the mechanical properties or the adhesion to other materials. Often it is unknown how the polymers affect in the PCC-matrix. Especially the reaktions under different stresses and strains are nondistinctive. Main points of the work are the shrinkage of PCC, the influence on the cohesion and adhesion inside of the material and the adhesion to other materials. This points were investigated under other views like durability properties (CDF-test) and mechanical load. The matrix of some polymer modified cement mortars (PCC) will be shown on a couple of SEM-pictures. Afterwards some selective mechanical and durability tests of PCC were introduced. The main properties of the investigated PCC were represented in some diagrams and tables. The stressed matrix will be visualised on SEM-pictures. On these pictures it will be imaginable, how different polymers act in the PCC-matrix. Some parts of the investigations were generated on the subproject B3 "Durability of Polymer modified Cement Concrete (PCC)" on the Collaborated Research Center 524 "Materials and Structures in Revitalisation of Buildings". KW - Betonzusatz KW - Beton KW - Kunstharzmodifizierter Zementbeton KW - Kohäsion KW - Adhäsion KW - Schwinden KW - Elastizitätsmodul KW - Kunststoffmörtel KW - Mörtel KW - Haftverbund KW - CDF-Verfahren KW - Taumittel KW - Mikroskopie KW - Kunststofffilme KW - cohesion KW - adhesion KW - polymer cement concrete KW - shrinkage KW - freeze-thaw-resistance Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20090513-14696 ER - TY - INPR A1 - Bode, Matthias A1 - Marx, Steffen A1 - Vogel, Albert A1 - Völker, Conrad T1 - Dissipationsenergie bei Ermüdungsversuchen an Betonprobekörpern N2 - Aufgrund des visko-elastoplastischen Materialverhaltens von Beton wird Probekörpern und Bauteilen infolge zyklischer Beanspruchungen Energie zugeführt. Die entsprechenden Energiegrößen werden durch Hystereseflächen der Spannungs-Dehnungslinien beschrieben. In der Literatur finden sich dabei unterschiedliche Ansätze, wofür diese Energie verwendet wird. Erste Untersuchungen zeigen, dass zumindest ein Teil dieser dissipierten Energie in thermische Energie umgewandelt wird. Mithilfe der in diesem Beitrag beschriebenen Methodik lassen sich diese Energiegrößen für jeden Lastwechsel eines Ermüdungsversuches schnell und zuverlässig bestimmen. Anschließend wurden mit dem implementierten Algorithmus die dissipierten Energien von insgesamt 27 zyklischen Versuchen ausgewertet. Analog zu der Dehnungsentwicklung und der Steifigkeitsdegradation weisen auch die Verläufe der dissipierten Energie über die Lastwechselzahl einen dreiphasigen Verlauf auf. Die Auswertung zeigt außerdem eine Korrelation zwischen der Bruchlastwechselzahl und der dissipierten Energie. Auch der Zusammenhang zwischen Probekörpererwärmung und dissipierter Energie konnte bestätigt werden. KW - Ermüdung KW - Beton KW - Dissipationsenergie KW - Probekörpererwärmung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211012-44938 UR - https://onlinelibrary.wiley.com/doi/10.1002/best.201900004 N1 - This is the pre-peer reviewed version of the following article: https://onlinelibrary.wiley.com/doi/10.1002/best.201900004, which has been published in final form at https://doi.org/10.1002/best.201900004 VL - 2019 ER - TY - CHAP A1 - Chudoba, Rostislav A1 - Butenweg, Christoph A1 - Pfeiffer, Frank T1 - Textile Reinforced Concrete Part I: Process Model for Collaborative Research and Development N2 - The goal of the collaborative research center (SFB 532) >Textile reinforced concrete (TRC): the basis for the development of a new material technology< installed in 1998 at the Aachen University is a complex assessment of mechanical, chemical, economical and productional aspects in an interdisciplinary environment. The research project involves 10 institutes performing parallel research in 17 projects. The coordination of such a research process requires effective software support for information sharing in form of data exchange, data analysis and data archival. Furthermore, the processes of experiment planning and design, modification of material compositions and design parameters and development of new material models in such an environment call for systematic coordination applying the concepts of operational research. Flexible organization of the data coming from several sources is a crucial premise for a transparent accumulation of knowledge and, thus, for a successful research in a long run. The technical information system (TRC-TIS) developed in the SFB 532 has been implemented as a database-powered web server with a transparent definition of the product and process model. It serves as an intranet server with access domains devoted to the involved research groups. At the same time, it allows the presentation of selected results just by granting a data object an access from the public area of the server via internet. KW - Beton KW - Bewehrung KW - Textilfaser KW - Datenbank Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2866 ER - TY - THES A1 - Eckardt, Stefan T1 - Adaptive heterogeneous multiscale models for the nonlinear simulation of concrete N2 - The nonlinear behavior of concrete can be attributed to the propagation of microcracks within the heterogeneous internal material structure. In this thesis, a mesoscale model is developed which allows for the explicit simulation of these microcracks. Consequently, the actual physical phenomena causing the complex nonlinear macroscopic behavior of concrete can be represented using rather simple material formulations. On the mesoscale, the numerical model explicitly resolves the components of the internal material structure. For concrete, a three-phase model consisting of aggregates, mortar matrix and interfacial transition zone is proposed. Based on prescribed grading curves, an efficient algorithm for the generation of three-dimensional aggregate distributions using ellipsoids is presented. In the numerical model, tensile failure of the mortar matrix is described using a continuum damage approach. In order to reduce spurious mesh sensitivities, introduced by the softening behavior of the matrix material, nonlocal integral-type material formulations are applied. The propagation of cracks at the interface between aggregates and mortar matrix is represented in a discrete way using a cohesive crack approach. The iterative solution procedure is stabilized using a new path following constraint within the framework of load-displacement-constraint methods which allows for an efficient representation of snap-back phenomena. In several examples, the influence of the randomly generated heterogeneous material structure on the stochastic scatter of the results is analyzed. Furthermore, the ability of mesoscale models to represent size effects is investigated. Mesoscale simulations require the discretization of the internal material structure. Compared to simulations on the macroscale, the numerical effort and the memory demand increases dramatically. Due to the complexity of the numerical model, mesoscale simulations are, in general, limited to small specimens. In this thesis, an adaptive heterogeneous multiscale approach is presented which allows for the incorporation of mesoscale models within nonlinear simulations of concrete structures. In heterogeneous multiscale models, only critical regions, i.e. regions in which damage develops, are resolved on the mesoscale, whereas undamaged or sparsely damage regions are modeled on the macroscale. A crucial point in simulations with heterogeneous multiscale models is the coupling of sub-domains discretized on different length scales. The sub-domains differ not only in the size of the finite elements but also in the constitutive description. In this thesis, different methods for the coupling of non-matching discretizations - constraint equations, the mortar method and the arlequin method - are investigated and the application to heterogeneous multiscale models is presented. Another important point is the detection of critical regions. An adaptive solution procedure allowing the transfer of macroscale sub-domains to the mesoscale is proposed. In this context, several indicators which trigger the model adaptation are introduced. Finally, the application of the proposed adaptive heterogeneous multiscale approach in nonlinear simulations of concrete structures is presented. N2 - Das nichtlineare Materialverhalten von Beton ist durch die Entwicklung von Mikrorissen innerhalb der heterogenen Materialstruktur gekennzeichnet. In dieser Arbeit wird ein Mesoskalenmodell entwickelt, welches die einzelnen Bestandteile der Materialstruktur explizit auflöst und somit die Simulation dieser Mikrorisse erlaubt. Dadurch können die wirklichen physikalischen Vorgänge, welche das komplexe nichtlineare Verhalten von Beton verursachen, durch relativ einfache Materialformulierungen abgebildet werden. Für Beton wird auf der Mesoskala ein 3-Phasenmodell vorgeschlagen, bestehend aus groben Zuschlägen, Mörtelmatrix und Übergangszone zwischen Zuschlag und Matrix. In diesem Zusammenhang wird ein effizienter Algorithmus vorgestellt, welcher ausgehend von einer gegebenen Sieblinie dreidimensionale Kornstrukturen mittels Ellipsoiden simuliert. Im Mesoskalenmodell wird das Zugversagen der Mörtelmatrix durch einen Kontinuumsansatz beschrieben. Um Netzabhängigkeiten, welche durch das Entfestigungsverhalten des Materials hervorgerufen werden, zu reduzieren, kommen nichtlokale Materialformulierungen zum Einsatz. Risse innerhalb der Übergangszone zwischen Zuschlag und Matrix werden, basierend auf einem kohäsiven Modell, mittels eines diskreten Rissansatzes abgebildet. Die Verwendung einer neuen Nebenbedingung innerhalb der Last-Verschiebungs-Zwangsmethode führt zu einer Stabilisierung des iterativen Lösungverfahrens, so dass eine effiziente Simulation von Snap-back Phänomenen möglich wird. Anhand von Beispielen wird gezeigt, dass Mesoskalenmodelle die stochastische Streuung von Ergebnissen und Maßstabseffekte abbilden können. Da auf der Mesoskala die Diskretisierung der inneren Materialstruktur erforderlich ist, steigt im Vergleich zu Simulationen auf der Makroskala der numerische Aufwand erheblich. Aufgrund der Komplexität des numerischen Modells sind Mesoskalensimulationen in der Regel auf kleine Probekörper beschränkt. In dieser Arbeit wird ein adaptiver heterogener Mehrskalenansatz vorgestellt, welcher die Verwendung von Mesoskalenmodellen in nichtlinearen Simulationen von Betonstrukturen erlaubt. In heterogenen Mehrskalenmodellen werden nur kritische Bereiche auf der Mesoskala aufgelöst, während ungeschädigte Bereiche auf der Makroskala abgebildet werden. Ein wichtiger Aspekt in Simulationen mit heterogenen Mehrskalenmodellen ist die Kopplung der auf unterschiedlichen Längenskalen diskretisierten Teilgebiete. Diese unterscheiden sich nicht nur in der Größe der finiten Elemente sondern auch in der Beschreibung des Materials. Verschiedene Methoden zur Kopplung nicht übereinstimmender Vernetzungen - Kopplungsgleichungen, die Mortar-Methode und die Arlequin-Methode - werden untersucht und ihre Anwendung in heterogenen Mehrskalenmodellen wird gezeigt. Ein weiterer wichtiger Aspekt ist die Bestimmung kritischer Regionen. Eine adaptive Lösungsstrategie wird entwickelt, welche die Umwandlung von Makroskalengebieten auf die Mesoskala erlaubt. In diesem Zusammenhang werden Indikatoren vorgestellt, die eine Modellanpassung auslösen. Anhand nichtlinearer Simulationen von Betonstrukturen wird die Anwendung des vorgestellten adaptiven heterogenen Mehrskalenansatzes demonstriert. T2 - Adaptive heterogene Mehrskalenmodelle zur nichtlinearen Simulation von Beton T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2010,1 KW - Beton KW - Mehrskalenanalyse KW - Finite-Elemente-Methode KW - Nichtlineare Finite-Elemente-Methode KW - Schadensmechanik KW - Mehrskalenmodell KW - Adaptives Verfahren KW - concrete KW - multiscale method KW - finite element method KW - continuum damage mechanics KW - adaptive simulation Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100317-15023 ER - TY - THES A1 - Ehrhardt, Dirk T1 - ZUM EINFLUSS DER NACHBEHANDLUNG AUF DIE GEFÜGEAUSBILDUNG UND DEN FROST-TAUMITTELWIDERSTAND DER BETONRANDZONE N2 - Die Festigkeitsentwicklung des Zementbetons basiert auf der chemischen Reaktion des Zementes mit dem Anmachwasser. Durch Nachbehandlungsmaßnahmen muss dafür gesorgt werden, dass dem Zement genügend Wasser für seine Reaktion zur Verfügung steht, da sonst ein Beton mit minderer Qualität entsteht. Die vorliegende Arbeit behandelt die grundsätzlichen Fragen der Betonnachbehandlung bei Anwendung von Straßenbetonen. Im Speziellen wird die Frage des erforderlichen Nachbehandlungsbedarfs von hüttensandhaltigen Kompositzementen betrachtet. Die Wirkung der Nachbehandlung wird anhand des erreichten Frost-Tausalz-Widerstandes und der Gefügeausbildung in der unmittelbaren Betonrandzone bewertet. Der Fokus der Untersuchungen lag auf abgezogenen Betonoberflächen. Es wurde ein Modell zur Austrocknung des jungen Betons erarbeitet. Es konnte gezeigt werden, dass in einer frühen Austrocknung (Kapillarphase) keine kritische Austrocknung der Betonrandzone einsetzt, sondern der Beton annährend gleichmäßig über die Höhe austrocknet. Es wurde ein Nomogramm entwickelt, mit dem die Dauer der Kapillarphase in Abhängigkeit der Witterung für Straßenbetone abgeschätzt werden kann. Eine kritische Austrocknung der wichtigen Randzone setzt nach Ende der Kapillarphase ein. Für Betone unter Verwendung von Zementen mit langsamer Festigkeitsentwicklung ist die Austrocknung der Randzone nach Ende der Kapillarphase besonders ausgeprägt. Im Ergebnis zeigen diese Betone dann einen geringen Frost-Tausalz-Widerstand. Mit Zementen, die eine 2d-Zementdruckfestigkeit ≥ 23,0 N/mm² aufweisen, wurde unabhängig von der Zementart (CEM I oder CEM II/B-S) auch dann ein hoher Frost-Tausalz-Widerstand erreicht, wenn keine oder eine schlechtere Nachbehandlung angewendet wurde. Für die Praxis ergibt sich damit eine einfache Möglichkeit der Vorauswahl von geeigneten Zementen für den Verkehrsflächenbau. Betone, die unter Verwendung von Zementen mit langsamere Festigkeitsentwicklung hergestellt werden, erreichen einen hohen Frost-Tausalz-Widerstand nur mit einer geeigneten Nachbehandlung. Die Anwendung von flüssigen Nachbehandlungsmitteln (NBM gemäß TL NBM-StB) erreicht eine ähnliche Wirksamkeit wie eine 5 tägige Feuchtnachbehandlung. Voraussetzung für die Wirksamkeit der NBM ist, dass sie auf eine Betonoberfläche ohne sichtbaren Feuchtigkeitsfilm (feuchter Glanz) aufgesprüht werden. Besonders wichtig ist die Beachtung des richtigen Auftragszeitpunktes bei kühler Witterung, da hier aufgrund der verlangsamten Zementreaktion der Beton länger Anmachwasser abstößt. Ein zu früher Auftrag des Nachbehandlungsmittels führt zu einer Verschlechterung der Qualität der Betonrandzone. Durch Bereitstellung hydratationsabhängiger Transportkenngrößen (Feuchtetransport im Beton) konnten numerische Berechnungen zum Zusammenspiel zwischen der Austrocknung, der Nachbehandlung und der Gefügeentwicklung durchgeführt werden. Mit dem erstellten Berechnungsmodell wurden Parameterstudien durchgeführt. Die Berechnungen bestätigen die wesentlichen Erkenntnisse der Laboruntersuchungen. Darüber hinaus lässt sich mit dem Berechnungsmodell zeigen, dass gerade bei langsam reagierenden Zementen und kühler Witterung ohne eine Nachbehandlung eine sehr dünne Randzone (ca. 500 µm – 1000 µm) mit stark erhöhter Kapillarporosität entsteht. N2 - The hardening of cement concrete is based on the chemical reaction of cement and water. Therefore, the ensuring of sufficient amount of water in concrete is essential. All these measures are referred as curing of concrete. This dissertation provides a basic consideration of curing of concrete for concrete pavements. In this regard the using of cements with slow strength development, e.g. cements with blast furnace slag is the main topic. The effectiveness of curing was evaluated on the basis of the freeze-thaw de-icing resistance and the microstructure of hardened outer concrete surface. Concrete surfaces with textured mortar are on the focus. The results were used to develope a model of the drying of young concrete. It could be shown, that the outer concrete surface does not dry during the first drying phase (called capillary phase). Instead the concrete is drying evenly over the high of the concrete sample during the capillary drying phase. A fast drying of the outer concrete surface only takes place after the capillary drying phase. Based on all results a nomogram (for road concrete) was created for an estimation of the duration of the capillary drying phase. If there is no curing after the capillary drying phase the concrete with use of slowly reacting cement has a great risk for a harmful drying of outer concrete surface. In this case such a concrete shows a very poor freeze thaw de-icing resistance. By using cements with a 2 day-compressive strength ≥ 23,0 N/mm² a good freeze thaw de-icing resistance could assure, despite no or a poor curing was applied. This criterion can be used to estimate the usability of cements with granulated blast furnace slag when a great freeze thaw de-icing resistance is essential. There could also be used a cement with lower 2 day-compressive strength. In this case a good curing has to be assured. Spraying of liquid curing compounds according to TL NBM-StB is suitable for curing concrete pavements. The curing compound should not be sprayed on a concrete surface with any visible water film. The effectiveness of curing compounds is equal to a five days long wet curing in consideration of applying the curing compound at the right time. Otherwise there is some negative influence when the spraying of curing compounds starts too early. Consideration about the right application time of curing compounds is more important for low temperatures because the concrete bleeds much longer due to the slower cement reaction at low temperatures. It was possible to create a numerical model which accounts the interaction between drying, curing and development of microstructure by providing hydration dependent transport parameters (water transport in concrete). The model was used for a parameter study. It could be shown that the combination of cements with slow strength development and low ambient temperatures leads to a thin surface zone (500 µm – 1000 µm) with very high capillary porosity. KW - Beton KW - Zement KW - Nachbehandlung KW - Modellbildung KW - Nachbehandlungsmittel KW - Straßenbeton KW - Frost-Tausalz-Widerstand KW - curing compounds KW - concrete pavements Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171120-36889 ER - TY - THES A1 - Flohr, Alexander T1 - Der Einfluss von Polymermodifikationen, unterschiedlichen Gesteinskörnungen und Gesteinskörnungssubstitutionsmaterial auf das Verformungs- und Bruchverhalten von Beton N2 - In dieser Arbeit werden die Ergebnisse von experimentellen Untersuchungen an unbewehrten und bewehrten modifizierten Betonen unter monoton steigender Belastung bis zum Bruch, einfacher Kurzzeitbelastung im Grenzbereich der Tragfähigkeit und mehrfach wiederholter Belastung mit kontinuierlicher Be- und Entlastungsgeschwindigkeit vorgestellt und ausgewertet. Für die Modifizierung der Betone wurden zwei grundsätzliche Vorgehens¬weisen angewendet: die Variation der Gesteinskörnung und die Modifizierung der Bindemittelphase mit thermoplastischen Polymeren. Die Auswirkungen der Modifikationen auf die Festigkeitseigenschaften und das Formänderungsverhalten des Betons bei Kurzzeitbelastung waren dabei von besonderem Interesse. Die beobachteten Veränderungen der Festbetoneigenschaften sowie der nichtlineare Zu-sammenhang zwischen den elastischen und nichtelastischen Verformungsanteilen signali-sieren, dass derartige Modifizierungen das Verformungs- und Bruchverhalten von Beton sig-nifikant beeinflussen und somit beim Nachweis der Tragfähigkeit und Gebrauchstauglichkeit berücksichtigt werden müssen. Neben der Evaluierung des beanspruchungsabhängigen Formänderungsverhaltens werden die etablierten Ansätze zur Beschreibung der Gefügezu-standsbereiche bei Druckbelastung weiter entwickelt, so dass die Übergänge zwischen den Bereichen exakt ermittelt und die Ausprägung der Bereiche quantifiziert werden können. Damit ist ein genauerer Vergleich der durch die Modifizierungen hervorgerufenen Verände-rungen möglich. N2 - The results of experimental investigations of unreinforced and reinforced modified concrete under monotonically increasing load until fracture, simple short-term load at the limit of capa-city and repeated load with continuous loading and release rate are introduced in the pre-sented thesis. The modification of the concretes was approached in two ways: the variation of the aggregates and the modification of the binder phase with thermoplastic polymers. Of particular interest were the effects of the modifications on the strength properties and the deformation behavior under short-term load. The observed changes in the hardened concrete properties and the non-linear relation be-tween the elastic and inelastic proportions of deformation indicate that such modifications affect the deformation and fracture behavior of concrete significantly. Therefore they have to be accounted for the analysis of capacity and suitability. In addition to the evaluation of the load-dependent deformation behavior, the established approaches to describe the structural state areas are developed further. Therewith, the transitions between the areas can be de-termined accurately and the dimension of the areas can be quantified. As a result the chang-es caused by modifications could be compared more precisely. KW - Beton KW - Polymermodifizierter Beton KW - Concrete KW - Gesteinskörnung KW - Gesteinskörnungssubstitutionsmaterial KW - Lastverformungsverhalten KW - Bruchverhalten KW - Druckbelastung KW - Zugbelastung KW - Biegezugbelastung KW - Polymermodified Cement Concrete KW - aggregates KW - deformation behavior Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130806-20035 ER - TY - THES A1 - Giebson, Colin T1 - Die Alkali-Kieselsäure-Reaktion in Beton für Fahrbahndecken und Flugbetriebsflächen unter Einwirkung alkalihaltiger Enteisungsmittel N2 - Das Hauptziel der Arbeit war es zu klären, ob alkalihaltige Enteisungsmittel eine Alkali-Kieselsäure-Reaktion (AKR) auslösen und/oder beschleunigen können und was die dabei ggf. zugrunde liegenden Mechanismen sind. Die Untersuchungen dazu ergaben, dass die auf Verkehrsflächen eingesetzten alkalihaltigen Enteisungsmittel auf Basis von Natriumchlorid (Fahrbahndecken) bzw. auf Basis der Alkaliacetate und -formiate (Flugbetriebsflächen) den Ablauf einer AKR in Betonen mit alkalireaktiven Gesteinskörnungen auslösen und mitunter stark beschleunigen können. Dabei nimmt die AKR-fördernde Wirkung der Enteisungsmittel in der Reihenfolge Natriumchlorid - Alkaliacetate - Alkaliformiate erheblich zu. Es zeigte sich, dass im Fall der Alkaliacetate und -formiate nicht allein die Zufuhr von Alkalien von Bedeutung ist, sondern dass es außerdem zu einer Freisetzung von OH-Ionen aus dem Portlandit und folglich zu einem Anstieg des pH-Wertes in der Porenlösung kommt. Dadurch wird der Angriff auf alkalireaktives SiO2 in Gesteinskörnungen verstärkt und der Ablauf einer AKR beschleunigt. Unter äußerer NaCl-Zufuhr kommt es hingegen nicht zu einem Anstieg des pH-Wertes, was der Grund für die weniger stark AKR-fördernde Wirkung von NaCl ist. Von Bedeutung sind hier die zugeführten Na-Ionen und offenbar ein sich andeutender, direkter Einfluss von NaCl auf das SiO2-Löseverhalten. Sind pH-Wert und Na-Konzentration in der Porenlösung ausreichend hoch, wird sich thermodynamisch bedingt AKR-Gel bilden. Die Bildung von FRIEDEL’schem Salz ist dabei nur eine Begleiterscheinung, aber keine Voraussetzung für den Ablauf einer AKR unter äußerer NaCl-Zufuhr. Es zeigte sich weiter, dass sich mit der FIB-Klimawechsellagerung als Performance-Prüfung das AKR-Schädigungspotential von Betonen für Fahrbahndecken und Flugbetriebsflächen zuverlässig beurteilen lässt. Die Vorteile der FIB-Klimawechsellagerung liegen in der Prüfung kompletter, projektspezifischer Betonzusammensetzungen unter Beachtung aller praxisrelevanten klimatischen Einwirkungen und vor allem in der Berücksichtigung einer äußeren Alkalizufuhr. Innerhalb von 36 Wochen kann das AKR-Schädigungspotential einer Betonzusammensetzung für eine Nutzungsdauer von 20-30 Jahren in der Praxis sicher beurteilt werden. N2 - The primary objective of this thesis was to elucidate whether alkali-containing deicers are able to trigger and/or to accelerate an alkali-silica reaction (ASR) in concrete and, if so, what the reaction mechanisms are. The investigations showed that alkali-containing deicers used for highway (sodium chloride) and airfield (alkali acetates/formates) pavements are able to trigger and highly accelerate ASR in concrete with alkali-reactive aggregates. The aggressiveness of the deicers increases in the order sodium chloride – alkali acetates – alkali formates. The results indicate that in case of the alkali acetates and formates it is not just an issue of the alkalis but also of an additional release of OH-ions from portlandite, resulting in an increase of the pH in the concrete pore solution. Hence, the attack on silica in alkali-reactive aggregates is intensified and the ASR can be highly accelerated. For sodium chloride, however, it was evident that there is not an increase of the pH what is the decisive reason for its less severe impact on the ASR. Vitally important is the excess supply of Na-ions together with clear indications that sodium chloride is able to influence the dissolution behaviour of silica directly. Thermodynamically driven, ASR-gel will form if the pH and the Na-concentration are sufficiently high. The formation of chloroaluminates like FRIEDEL’s salt is thus rather an accompanying than a required reaction for an ASR. It could be shown furthermore that the cyclic climate storage as a performance test is able to assess the ASR potential of concrete mixtures for highway and airfield pavements reliably. The advantages of the cyclic climate storage are to test project specific concrete compositions, i.e. job mixtures, under extensively realistic conditions, including the impact of alkali-containing deicers. Within 36 weeks, it is possible to safely predict the ASR potential of the mixtures for a service life of 20-30 years. KW - Beton KW - Alkali-Kieselsäure-Reaktion KW - Alkali-Kieselsäure-Reaktion; Fahrbahndecken; Flugbetriebsflächen; äußere Alkalizufuhr; Enteisungsmittel; Natriumchlorid; Alkaliacetate; Alkaliformiate; AKR-Performance-Prüfung; FIB-Klimawechsellagerung KW - alkali-silica reaction; pavements; external alkalis; deicer; sodium chloride; alkali acetates; alkali formates; ASR performance test; cyclic climate storage Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131217-20916 SN - 978-3-00-044366-4 (Druckversion) ER - TY - THES A1 - Grosse, Marco T1 - Zur numerischen Simulation des physikalisch nichtlinearen Kurzzeittragverhaltens von Nadelholz am Beispiel von Holz-Beton-Verbundkonstruktionen T1 - On the numerical simulation of the nonlinear short-time carrying behaviour of softwood with application to timber-concrete composite structures N2 - In der Arbeit wird ein räumliches Materialmodell für den anisotropen Werkstoff Holz vorgestellt. Dessen Leistungsfähigkeit wird durch Verifikationsrechnungen und die Simulation eigener Versuche aufgezeigt. In diesen Versuchen wurde das Tragverhalten spezieller Schubverbindungselemente der Brettstapel-Beton-Verbundbauweise untersucht. Die Kombination eines Brettstapels mit einer schubfest angeschlossenen Betonplatte ist eine vorteilhafte Möglichkeit, Schnittholz mit geringem Querschnitt effektiv in biegebeanspruchten Bauteilen einzusetzen. Es werden die Ergebnisse der experimentellen Untersuchungen zu den Schubverbindungselementen Flachstahlschloss und Nutverbindung vorgestellt. Diese zeichnen sich durch eine über die gesamte Plattenbreite kontinuierliche Übertragung der Schubkraft per Kontaktpressung aus. Vor allem in Brettstapel-Beton-Verbunddecken werden somit ein sehr hoher Verschiebungsmodul sowie eine eminente Tragfähigkeit erreicht. Um mit numerischen Strukturanalysen die in den Versuchen beobachteten Versagensmechanismen adäquat abbilden und realistische Prognosen für das Tragverhalten von Bauteilen oder Verbindungen treffen zu können, muss das physikalisch nichtlineare Verhalten aller beteiligter Baustoffe in die Berechnungen einbezogen werden. Im Rahmen der Dissertation wurde ein auf der Plastizitätstheorie basierendes Materialmodell für Nadelholz hergeleitet und in das FE-Programm ANSYS implementiert, welches die Mikrostruktur des Holzes als verschmierendes Ersatzkontinuum erfasst. Anhand des anatomischen Aufbaus des inhomogenen, anisotropen und porigen Werkstoffs werden die holzspezifischen Versagensmechanismen und die daraus abgeleiteten konstitutiven Beziehungen erläutert. Das ausgeprägt anisotrope Tragverhalten von Holz ist vor allem durch erstaunliche Duktilität bei Stauchung, sprödes Versagen bei Zug- und Schubbeanspruchung und enorme Festigkeitsunterschiede in den Wuchsrichtungen gekennzeichnet. Die Auswirkungen der größtenteils unabhängig voneinander auftretenden, mikromechanischen Versagensmechanismen auf die Spannungs-Verformungsbeziehungen wurden durch die Formulierung adäquater Ver- resp. Entfestigungsfunktionen in Abhängigkeit der Beanspruchungsmodi erfasst. Das dem Materialmodell zu Grunde liegende mehrflächige Fließkriterium berücksichtigt die Interaktion aller sechs Komponenten des räumlichen Spannungszustandes. Die durchgeführten Verifikations- und Simulationsberechnungen belegen, dass der erarbeitete Ansatz sowohl zur Bewertung des Tragvermögens als auch zur Beurteilung von Riss- bzw. Schädigungsursachen von Holzbauteilen eingesetzt werden kann. Die numerische Simulation eröffnet neue, bisher wenig beachtete Möglichkeiten zur Untersuchung komplexer Holzstrukturen sowie Anschlussdetails und wird sich auf Grund der Aussagekraft und Flexibilität auch im Ingenieurholzbau mehr und mehr gegenüber ausschließlich experimenteller Untersuchung durchsetzen. N2 - In the dissertation a spatial model for the anisotropic, porous material wood is presented. The efficiency of this numerical approach is pointed out by verifying computations and simulations of own experiments. In these tests the load carrying behaviour of special joining techniques for laminated timber concrete composite constructions have been examined. The combination of a laminated timber element with a shear resistant joined concrete slab is a profitable alternative for effectively using lumber with small cross section in bending stressed members. The results of the experimental investigations of flat-steel-lock and notch connection are presented. These are characterised by a load transmission via contact pressure continuously over the entire slab width. Particularly in laminated timber concrete composite ceilings a very stiff load-deflection relationship as well as an eminent load-carrying capacity is reached. To simulate the structural behaviour of members and to model there failure mechanisms it is necessary to take the mechanically nonlinear behaviour in the critical and post critical range of all involved materials into account. For this reason a constitutive material model for timber based on the plasticity theory was implemented in the finite element code ANSYS. The basic multisurface yield criterion considers the interaction of all six components of the spatial stress state. The proposal is furthermore based on the classic continuum mechanics. Therefore, a crack is not described discretely, but by its effect on the stress deformation behaviour. The numerical model reproduces the wood-specific anisotropic, load dependent strengths as well as predominantly independent proceeding of strain hardening and, respectively, softening. The conducted verifications and simulations prove, that the designed approach can be applied to the evaluation of the load-carrying behaviour as well as crack and damage causes of timber components. The numerical simulation opens new potentialities for investigation of complex wooden structures as well as connection details. Compared with expensive experimental studies this procedure will gain more significance due to its expressiveness and flexibility even in timber engineering. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 7 KW - Holzbau KW - Verbundbauweise KW - Beton KW - Nichtlineare Finite-Elemente-Methode KW - Plastizitätstheorie KW - Numerische Mathematik KW - Simulation KW - Nichtlineare Kon KW - Holz-Beton-Verbund KW - HBV KW - Versagensmechanismen KW - Brettstapel KW - timber concrete composite KW - laminated timber Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060215-7725 ER - TY - CHAP A1 - Gründel, Hendrik A1 - Ludwig, Horst-Michael A1 - Geisenhanslüke, Carsten A1 - Müller, Matthias T1 - Einfluss der Zusammensetzung von Portlandzementklinker und Sulfatträger auf das Erstarrungsverhalten von Spritzbeton T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung : 16.-18. September 2015, Weimar N2 - In der vorliegenden Studie wurde der Einfluss der Klinkerzusammensetzung sowie der Sulfatträgerart auf die Leistungsfähigkeit eines Spritzzementes untersucht. Um eine Untersulfatisierung im System mit einen Aluminiumsulfat / -hydroxid Beschleuniger zu vermeiden, sollte ein anhydritbasierter Sulfatträger eingesetzt werden. Dies führt zu einer besseren Festigkeitsentwicklung im jungen Alter. N2 - In the present study, the influence of the clinker composition as well as the setting agent type on the performance of a sprayed cement was investigated. To avoid undersulfatization in the system with an aluminum sulfate/hydroxide accelerator, an anhydrite-based setting agent should be used. This leads to a better strength development at a young age. KW - Beton KW - Spritzbeton KW - Zement KW - Spritzbeton KW - Spritzzement KW - Sulfatträger KW - Sprayed concrete KW - Setting agent Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48851 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) ER - TY - THES A1 - Hanna, John T1 - Computational Fracture Modeling and Design of Encapsulation-Based Self-Healing Concrete Using XFEM and Cohesive Surface Technique N2 - Encapsulation-based self-healing concrete (SHC) is the most promising technique for providing a self-healing mechanism to concrete. This is due to its capacity to heal fractures effectively without human interventions, extending the operational life and lowering maintenance costs. The healing mechanism is created by embedding capsules containing the healing agent inside the concrete. The healing agent will be released once the capsules are fractured and the healing occurs in the vicinity of the damaged part. The healing efficiency of the SHC is still not clear and depends on several factors; in the case of microcapsules SHC the fracture of microcapsules is the most important aspect to release the healing agents and hence heal the cracks. This study contributes to verifying the healing efficiency of SHC and the fracture mechanism of the microcapsules. Extended finite element method (XFEM) is a flexible, and powerful discrete crack method that allows crack propagation without the requirement for re-meshing and has been shown high accuracy for modeling fracture in concrete. In this thesis, a computational fracture modeling approach of Encapsulation-based SHC is proposed based on the XFEM and cohesive surface technique (CS) to study the healing efficiency and the potential of fracture and debonding of the microcapsules or the solidified healing agents from the concrete matrix as well. The concrete matrix and a microcapsule shell both are modeled by the XFEM and combined together by CS. The effects of the healed-crack length, the interfacial fracture properties, and microcapsule size on the load carrying capability and fracture pattern of the SHC have been studied. The obtained results are compared to those obtained from the zero thickness cohesive element approach to demonstrate the significant accuracy and the validity of the proposed simulation. The present fracture simulation is developed to study the influence of the capsular clustering on the fracture mechanism by varying the contact surface area of the CS between the microcapsule shell and the concrete matrix. The proposed fracture simulation is expanded to 3D simulations to validate the 2D computational simulations and to estimate the accuracy difference ratio between 2D and 3D simulations. In addition, a proposed design method is developed to design the size of the microcapsules consideration of a sufficient volume of healing agent to heal the expected crack width. This method is based on the configuration of the unit cell (UC), Representative Volume Element (RVE), Periodic Boundary Conditions (PBC), and associated them to the volume fraction (Vf) and the crack width as variables. The proposed microcapsule design is verified through computational fracture simulations. KW - Beton KW - Bruchverhalten KW - Finite-Elemente-Methode KW - Self-healing concrete KW - Computational fracture modeling KW - Capsular clustering; Design of microcapsules KW - XFEM KW - Cohesive surface technique KW - Mikrokapsel KW - Selbstheilendem Beton KW - Computermodellierung des Bruchverhaltens KW - Entwurf von Mikrokapseln KW - Kapselclustern KW - Erweiterte Finite-Elemente-Methode KW - Kohäsionsflächenverfahren Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221124-47467 ER - TY - JOUR A1 - Hanna, John T1 - Computational Modelling for the Effects of Capsular Clustering on Fracture of Encapsulation-Based Self-Healing Concrete Using XFEM and Cohesive Surface Technique JF - Applied Sciences N2 - The fracture of microcapsules is an important issue to release the healing agent for healing the cracks in encapsulation-based self-healing concrete. The capsular clustering generated from the concrete mixing process is considered one of the critical factors in the fracture mechanism. Since there is a lack of studies in the literature regarding this issue, the design of self-healing concrete cannot be made without an appropriate modelling strategy. In this paper, the effects of microcapsule size and clustering on the fractured microcapsules are studied computationally. A simple 2D computational modelling approach is developed based on the eXtended Finite Element Method (XFEM) and cohesive surface technique. The proposed model shows that the microcapsule size and clustering have significant roles in governing the load-carrying capacity and the crack propagation pattern and determines whether the microcapsule will be fractured or debonded from the concrete matrix. The higher the microcapsule circumferential contact length, the higher the load-carrying capacity. When it is lower than 25% of the microcapsule circumference, it will result in a greater possibility for the debonding of the microcapsule from the concrete. The greater the core/shell ratio (smaller shell thickness), the greater the likelihood of microcapsules being fractured. KW - Beton KW - Mikrokapsel KW - Rissausbreitung KW - Tragfähigkeit KW - self-healing concrete KW - microcapsule KW - capsular clustering KW - circumferential contact length KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220721-46717 UR - https://www.mdpi.com/2076-3417/12/10/5112 VL - 2022 IS - Volume 12, issue 10, article 5112 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - THES A1 - Hatahet, Tareq T1 - On the Analysis of the Disproportionate Structural Collapse in RC Buildings N2 - Increasing structural robustness is the goal which is of interest for structural engineering community. The partial collapse of RC buildings is subject of this dissertation. Understanding the robustness of RC buildings will guide the development of safer structures against abnormal loading scenarios such as; explosions, earthquakes, fine, and/or long-term accumulation effects leading to deterioration or fatigue. Any of these may result in local immediate structural damage, that can propagate to the rest of the structure causing what is known by the disproportionate collapse. This work handels collapse propagation through various analytical approaches which simplifies the mechanical description of damaged reinfoced concrete structures due to extreme acidental event. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2018,2 KW - Beton KW - disproportionate collapse KW - buildings KW - reinforced concrete KW - catenary action KW - compressive arching KW - dynamic amplifification KW - structural robustness Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180329-37405 ER - TY - THES A1 - Heidolf, Thorsten T1 - Zeit- und beanspruchungsabhängiges Tragverhalten von polymermodifiziertem Beton unter mehrfach wiederholter Beanspruchung T1 - Time- and Strain-Dependent Behaviour of Polymer-Modified Concrete with Multifariously Repeated Load N2 - In der vorliegenden Arbeit werden die experimentellen Ergebnisse eigener Untersuchungen an unbewehrtem und bewehrtem polymermodifiziertem Beton unter mehrfach wiederholter Druck- und Zugbeanspruchung vorgestellt und mit den Ergebnissen ähnlicher Versuche an Normalbeton und hochfestem Beton verglichen. Besondere Aufmerksamkeit wird dabei dem Formänderungsverhalten, der Steifigkeitsdegradation und der Energiedissipation sowie dem Kriechverhalten und der Mitwirkung des Betons zwischen den Rissen gewidmet. Die beobachtete signifikante Steifigkeitsdegradation sowie der ausgeprägt nichtlineare Zusammenhang zwischen der viskosen Verformung und der elastischen Stauchung zeigen, dass bei der Analyse der Kriech¬aus¬wirkungen des polymermodifizierten Betons auf das Tragverhalten entsprechender Kon¬struktionen neben den Gebrauchslasten auch die während der Lastgeschichte aufgetretenen maximalen Beanspruchungssituationen sowie die damit verbundenen Strukturveränderungen zu berücksichtigen sind. Auf der Basis der Versuchsergebnisse und der visko-elastisch-plastischen Kontinuumsschädigungstheorie werden rheologische Modelle zur Beschreibung des zeit- und beanspruchungsabhängigen Tragverhaltens von Betonbauteile vorgeschlagen. Die numerische Umsetzung der vorgeschlagenen Modelle erfolgt unter Berücksichtigung des zeitabhängigen Materialverhaltens des Betons auf der Basis des HAMILTON-Prinzips unter Vernachlässigung der Trägheitskräfte. Durch eine zeitliche Diskretisierung kann die Problembeschreibung auf das Prinzip von LAGRANGE vom Minimum des Gesamtpotentials zurückgeführt und als nichtlineare Optimierungsaufgabe formuliert werden. Die Simulation des beanspruchungsabhängigen Tragverhaltens von Stahlbetonverbundquerschnitten verdeutlicht die Qualität und Leistungsfähigkeit der vorgeschlagenen Modellbildung. N2 - The experimental results of the investigations into polymer-modified concrete with multifariously repeated compression or tension load are introduced in the provided work and compared to similar experiments in normal- and high-strength concrete. Special attention is dedicated to the stress-strain relation, the degradation of stiffness and the dissipation of energy as well as the non-linear long-term behaviour and tension-stiffening. Stiffness degradation and non-linear creep of polymer-modified concrete show that maximum strain situations have to be taken into consideration of the behaviour analysis of concrete structures under long-term loading. Based on experimental results and the theory of visco-elastic-plastic continuum damage, rheological models are suggested for the description of the time- and damage-dependent behaviour of reinforced concrete. The numerical concept is based on the HAMILTON-principle. Using time discretisation, mechanical modelling simplifies and can be described as a LAGRANGE-principle concerning minimum of total potential energy. The problem is solved by non-linear optimisation. The efficiency of the suggested model was proven for reinforced concrete cross sections by numerical simulation. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 10 KW - Kriechen KW - Kunstharzmodifizierter Zementbeton KW - Beton KW - Tragverhalten KW - Bruchverhalten KW - Experiment KW - Deformationsverhalten KW - Stoffgesetz KW - nichtlineare Optimierung KW - Simulation KW - Formänderungsenergie KW - Steifigkeitsdegradation KW - Creep KW - damage KW - tension-stiffening KW - dissipation of energy KW - non-linear optimisation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080102-11753 SN - 978-3-86068-331-2 ER - TY - CHAP A1 - Häfner, Stefan A1 - Eckardt, Stefan A1 - Könke, Carsten T1 - A geometrical inclusion-matrix model for the finite element analysis of concrete at multiple scales N2 - This paper introduces a method to generate adequate inclusion-matrix geometries of concrete in two and three dimensions, which are independent of any specific numerical discretization. The article starts with an analysis on shapes of natural aggregates and discusses corresponding mathematical realizations. As a first prototype a two-dimensional generation of a mesoscale model is introduced. Particle size distribution functions are analysed and prepared for simulating an adequate three-dimensional representation of the aggregates within a concrete structure. A sample geometry of a three-dimensional test cube is generated and the finite element analysis of its heterogeneous geometry by a uniform mesh is presented. Concluding, aspects of a multiscale analysis are discussed and possible enhancements are proposed. KW - Beton KW - Dreidimensionales Modell KW - Finite-Elemente-Methode Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3018 ER - TY - THES A1 - Janke, Lars T1 - Tragverhalten von Betondruckgliedern mit vorgespannter Umschnürung aus Formgedächtnislegierungen, Stahl oder faserverstärkten Kunststoffen N2 - Druckbeanspruchte Bauteile aus Beton können mit zugfesten Umschnürungen von außen verstärkt werden. Mit dieser etablierten Methode konnten axiale Traglast und Duktilität von unzureichend bewehrten Stützen bereits verbessert werden. Es wurde jedoch festgestellt, dass der umschnürte Betonkern dennoch an Festigkeit verliert. Um die Wirksamkeit der Umschnürung zu erhöhen, wird deshalb vorgeschlagen, das umschnürende Material vorzuspannen. Dieser Vorschlag wird insbesondere von der neuen Materialgruppe der Formgedächtnislegierungen inspiriert, die thermisch vorspannbar sind. Bisher sind die Auswirkungen der Vorspannung einer Umschnürung auf das Tragverhalten von Betondruckgliedern kaum untersucht worden. Diese Lücke wird durch systematische Versuche an Betonzylindern mit vorgespannter Umschnürung aus Stahl und kohlenstofffaserverstärktem Kunststoff geschlossen. Die Abbildung der Versuchsergebnisse durch geeignete Modelle ermöglicht auch Aussagen zum Verhalten von Betondruckgliedern mit Umschnürungen aus anderen Materialien, beispielsweise Formgedächtnislegierungen. Um diese in den Berechnungen zu simulieren, wird eine für das Bauwesen infrage kommende eisenbasierte Legierung in separaten axialen Versuchen charakterisiert und thermisch vorgespannt. Die in der vorliegenden Arbeit entwickelten neuen Modelle orientieren sich im Wesentlichen an zwei Zielen: dem Abbilden des mehraxialen Spannungs-Dehnungs-Verhaltens des vorgespannt umschnürten Betons und dem Berechnen der Restfestigkeit des Betons. Die durchgeführten Versuche und Parameterstudien auf Basis der Modelle zeigen: Die Vorspannung der Umschnürung beeinflusst vor allem die Restfestigkeit des Betons wesentlich. Die gewonnenen Erkenntnisse und neuen Methoden können eingesetzt werden, um das Tragverhalten von Betondruckgliedern mit Umschnürungen aus Stahl, faserverstärktem Kunststoff oder Formgedächtnislegierungen zu bewerten. KW - Beton KW - Vorspannung KW - Formgedächtnis KW - Restfestigkeit KW - Stütze KW - Formänderungsenergie KW - Umschnürung KW - Modellierung KW - Verstärkung KW - faserverstärkt Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141023-23262 ER - TY - CHAP A1 - Konrad, Martin A1 - Chudoba, Rostislav A1 - Butenweg, Christoph T1 - Textile Reinforced Concrete Part II: Multi-Level Modeling Concept N2 - The development of a consistent material model for textile reinforced concrete requires the formulation and calibration of several sub-models on different resolution scales. Each of these models represents the material structure at the corresponding scale. While the models at the micro-level are able to capture the fundamental failure and damage mechanisms of the material components (e.g. filament rupture and debonding from the matrix) their computational costs limit their application to the small size representative unit cells of the material structure. On the other hand, the macro-level models provide a sufficient performance at the expense of limited range of applicability. Due to the complex structuring of the textile reinforced concrete at several levels (filament - yarn - textile - matrix) it is a non-trivial task to develop a multiscale model from scratch. It is rather more effective to develop a set of conceptually related sub-models for each structural level covering the selected phenomena of the material behavior. The homogenized effective material properties obtained at the lower level may be verified and validated using experiments and models at the higher level(s). In this paper the development of a consistent material model for textile reinforced concrete is presented. Load carrying and failure mechanisms at the micro, meso and macro scales are described and models with the focus on the specified scales are introduced. The models currently being developed in the framework of the collaborative research center are classified and evaluated with respect to the failure mechanisms being captured. The micromechanical modeling of the yarn and bonding behavior is discussed in detail and the correspondence with the experiments focused on the selected failure and interaction mechanisms is shown. The example of modeling the bond layer demonstrates the application of the presented strategy. KW - Beton KW - Bewehrung KW - Textilfaser KW - Mathematisches Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3230 ER - TY - THES A1 - Kurukuri, Srihari T1 - Homogenization of Damaged Concrete Mesostructures using Representative Volume Elements - Implementation and Application to SLang N2 - This master thesis explores an important and under-researched topic on the so-called bridging of length scales (from >meso< to >macro<), with the concept of homogenization in which the careful characterization of mechanical response requires that the developed material model >bridge< the representations of events that occur at two different scales. The underlying objective here is to efficiently incorporate material length scales in the classical continuum plasticity/damage theories through the concept of homogenization theory. The present thesis is devoted to computational modeling of heterogeneous materials, primarily to matrix-inclusion type of materials. Considerations are focused predominantly on the elastic and damage behavior as a response to quasistatic mechanical loading. Mainly this thesis focuses to elaborate a sound numerical homogenization model which accounts for the prediction of overall properties with the application of different types of boundary conditions namely: periodic, homogeneous and mixed type of boundary conditions over two-dimensional periodic and non-periodic RVEs and three-dimensional non-periodic RVEs. Identification of the governing mechanisms and assessing their effect on the material behavior leads one step further. Bringing together this knowledge with service requirements allows for functional oriented materials design. First, this thesis gives attention on providing the theoretical basic mechanisms involved in homogenization techniques and a survey will be made on existing analytical methods available in literature. Second, the proposed frameworks are implemented in the well known finite element software programs ANSYS and SLang. Simple and efficient algorithms in FORTRAN are developed for automated microstructure generation using RSA algorithm in order to perform a systematic numerical testing of microstructures of composites. Algorithms are developed to generate constraint equations in periodic boundary conditions and different displacements applied spatially over the boundaries of the RVE in homogeneous boundary conditions. Finally, nonlinear simulations are performed at mesolevel, by considering continuum scalar damage behavior of matrix material with the linear elastic behavior of aggregates with the assumption of rigid bond between constituents. KW - Schadensmechanik KW - Finite-Elemente-Methode KW - Beton KW - Homogenisierung KW - Repräsentative Volumen Elemente KW - Mesoskala KW - Homogenization KW - Representative Volume Elements KW - Mesoscale Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6670 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER -