TY - RPRT A1 - Bonhag-De Rosa, Katharina A1 - Boettger, Till A1 - von Gynz-Rekowski, Christoph T1 - Das Stapelhaus - Experimentelles Bauprojekt auf dem Campus der Bauhaus-Universität Weimar N2 - Das Stapelhaus fördert das experimentelle Bauen und Forschen an der Bauhaus-Universität Weimar. Ziel ist es, schrittweise Raummodule als Arbeitsräume von Studierenden für Studierende zu bauen. Im Zusammenhang bildet sich ein kompaktes und gestapeltes Raumgefüge, das fakultätsübergreifend Raum für Experimente, Erlebnisse und Evaluierung lässt. KW - Architektur KW - Experiment KW - Baustoff KW - Student KW - Arbeitsraum KW - Baumaterial KW - Monolithisch Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181221-38371 ER - TY - INPR A1 - Steiner, Maria A1 - Bourinet, Jean-Marc A1 - Lahmer, Tom T1 - An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression N2 - In the field of engineering, surrogate models are commonly used for approximating the behavior of a physical phenomenon in order to reduce the computational costs. Generally, a surrogate model is created based on a set of training data, where a typical method for the statistical design is the Latin hypercube sampling (LHS). Even though a space filling distribution of the training data is reached, the sampling process takes no information on the underlying behavior of the physical phenomenon into account and new data cannot be sampled in the same distribution if the approximation quality is not sufficient. Therefore, in this study we present a novel adaptive sampling method based on a specific surrogate model, the least-squares support vector regresson. The adaptive sampling method generates training data based on the uncertainty in local prognosis capabilities of the surrogate model - areas of higher uncertainty require more sample data. The approach offers a cost efficient calculation due to the properties of the least-squares support vector regression. The opportunities of the adaptive sampling method are proven in comparison with the LHS on different analytical examples. Furthermore, the adaptive sampling method is applied to the calculation of global sensitivity values according to Sobol, where it shows faster convergence than the LHS method. With the applications in this paper it is shown that the presented adaptive sampling method improves the estimation of global sensitivity values, hence reducing the overall computational costs visibly. KW - Approximation KW - Sensitivitätsanalyse KW - Abtastung KW - Surrogate models KW - Least-squares support vector regression KW - Adaptive sampling method KW - Global sensitivity analysis KW - Sampling Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181218-38320 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0951832017311808, which has been published in final form at https://doi.org/10.1016/j.ress.2018.11.015. SP - 1 EP - 33 ER - TY - JOUR A1 - Vollmer, Lisa T1 - Mieter_innenproteste von den 1960er bis in die 1980er Jahre in der BRD. Von der Klassenallianz zur Aufspaltung und Einhegung ins neoliberale Projekt JF - sub\urban. zeitschrift für kritische stadtforschung N2 - Die späten 1960er Jahre und vor allem die 1970er Jahre waren eine Hochphase der Mieter_innenproteste in der BRD. Dieser Beitrag verfolgt die These, dass die Krise der fordistischen Wohnraumversorgung in den 1960er Jahren, bzw. die von der Politik implementierten Lösungsstrategien dieser Krise, eine Klassenallianz in wohnungsbezogenen Protesten ermöglichte und, dass sich diese Klassenallianz im Laufe der 1970er und 1980er Jahre aufspaltete, was zur Einhegung des Protests in das entstehende neoliberale Projekt führte. Im Folgenden beschreibe ich also zunächst die Wohnungsfrage 1968 als Krise der fordistischen Wohnraumproduktion und damit die materielle Basis der Klassenallianz. Daran anschließend illustriere ich anhand von Protesten in den drei Bereichen Massenwohnungsbau, Sanierungsgebiete und Hausbesetzungen die Klassenallianz und vollziehe ich deren Aufspaltung nach. Und schließlich stelle ich die Frage, was heute aus dieser Geschichte gelernt werden kann. KW - Soziale Bewegung KW - Wohnungspolitik KW - 1968 KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181213-38290 UR - http://zeitschrift-suburban.de/sys/index.php/suburban/article/view/434 VL - 2018 IS - Band 6, Heft 2/3 SP - 137 EP - 148 ER - TY - THES A1 - Göbel, Luise T1 - Experimental and semi-analytical multiscale approaches for the characterization of the elastic and viscoelastic behavior of polymer-modified cement-based materials T1 - Experimentelle und semi-analytische Multiskalenmethoden für die Charakterisierung des elastischen und viskoelastischen Verhaltens polymermodifizierter zementgebundener Materialien N2 - Polymer-modified cement concrete (PCC) is a heterogeneous building material with a hierarchically organized microstructure. Therefore, continuum micromechanics-based multiscale models represent a promising method to estimate the mechanical properties. By means of a bottom-up approach, homogenized properties at the macroscopic scale are derived considering microstructural characteristics. The extension of existing multiscale models for the application to PCC is the main objective of this work. For that, cross-scale experimental studies are required. Both macroscopic and microscopic mechanical tests are performed to characterize the elastic and viscoelastic properties of different PCC. The comparison between experiment and model prediction illustrates the success of the modeling approach. N2 - Polymermodifizierter Beton (PCC) ist ein heterogener Baustoff mit einer hierarchisch organisierten Mikrostruktur. Deshalb sind Multiskalenmodelle, die auf Prinzipien der Kontinuumsmikromechanik beruhen, sehr gut für die Abschätzung mechanischer Eigenschaften geeignet. Mit Hilfe eines Bottom-Up-Ansatzes werden unter Berücksichtigung mikrostruktureller Charakteristika homogenisierte Eigenschaften auf der makroskopischen Materialebene erhalten. Die Erweiterung bestehender Multiskalenmodelle für die Anwendung auf PCC ist das Hauptziel dieser Arbeit. Dafür werden skalenübergreifende Experimente herangezogen. Sowohl makroskopische als auch mikroskopische mechanische Tests werden durchgeführt, um das elastische und viskoelastische Verhalten verschiedener PCC zu charakterisieren. Ein Vergleich zwischen experimentellen Ergebnissen und der entsprechenden Modellvorhersage verdeutlicht den Erfolg des Modellierungsansatzes. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 19 KW - Elastizitätsmodul KW - Zementstein KW - Kunststoffadditiv KW - Modellierung KW - Mehrphasensystem KW - Multiskalenmodellierung KW - Multiscale modeling KW - Mikrostruktur KW - Polymermodifizierung KW - Kriechen KW - Elastizitätsmodul KW - Microstructure KW - Polymer modification KW - Creep KW - Young's modulus Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181211-38279 SN - 978-3-95773-269-9 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - THES A1 - Mischke, Marcel T1 - Keine Ahnung? Landschaft! N2 - ... soll auf den folgenden Seiten eine dritte Richtung angedeutet und vorgezeichnet werden, die ebenso Interesse am Erkenntnisgewinn durch das Thema Landschaft bekundet, dies hingegen aus der Umkehrung heraus erreichen will. Dreht man den Richtungspfeil, stehen wir ihr, der Landschaft, gegenüber. Vom Modus des Aktiven geraten wir in die Passivität. Damit wird eine Korrektur der Fragestellung möglich. Es entsteht eine Perspektive, die die Überlegungen zulässt: Was die Landschaft eigentlich mit uns macht?, welchen Horizont sie uns eröffnet und entstehen lässt, welche Bedeutung und welche Qualität wir dem ›Landschaftlichen‹ zuschreiben können, worin die Notwendigkeit ihres Erhalts und der Nutzen für die gegenwärtige Gesellschaft bestehen kann. KW - Landschaft KW - Fotografie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181122-38242 ER - TY - INPR A1 - Rezakazemi, Mashallah A1 - Mosavi, Amir A1 - Shirazian, Saeed T1 - ANFIS pattern for molecular membranes separation optimization N2 - In this work, molecular separation of aqueous-organic was simulated by using combined soft computing-mechanistic approaches. The considered separation system was a microporous membrane contactor for separation of benzoic acid from water by contacting with an organic phase containing extractor molecules. Indeed, extractive separation is carried out using membrane technology where complex of solute-organic is formed at the interface. The main focus was to develop a simulation methodology for prediction of concentration distribution of solute (benzoic acid) in the feed side of the membrane system, as the removal efficiency of the system is determined by concentration distribution of the solute in the feed channel. The pattern of Adaptive Neuro-Fuzzy Inference System (ANFIS) was optimized by finding the optimum membership function, learning percentage, and a number of rules. The ANFIS was trained using the extracted data from the CFD simulation of the membrane system. The comparisons between the predicted concentration distribution by ANFIS and CFD data revealed that the optimized ANFIS pattern can be used as a predictive tool for simulation of the process. The R2 of higher than 0.99 was obtained for the optimized ANFIS model. The main privilege of the developed methodology is its very low computational time for simulation of the system and can be used as a rigorous simulation tool for understanding and design of membrane-based systems. Highlights are, Molecular separation using microporous membranes. Developing hybrid model based on ANFIS-CFD for the separation process, Optimization of ANFIS structure for prediction of separation process KW - Fluid KW - Simulation KW - Molecular Liquids KW - optimization KW - machine learning KW - Membrane contactors KW - CFD Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181122-38212 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0167732218345008, which has been published in final form at https://doi.org/10.1016/j.molliq.2018.11.017. VL - 2018 SP - 1 EP - 20 ER - TY - THES A1 - Schollmeyer, Andre T1 - Efficient and High-Quality Rendering of Higher-Order Geometric Data Representations N2 - Computer-Aided Design (CAD) bezeichnet den Entwurf industrieller Produkte mit Hilfe von virtuellen 3D Modellen. Ein CAD-Modell besteht aus parametrischen Kurven und Flächen, in den meisten Fällen non-uniform rational B-Splines (NURBS). Diese mathematische Beschreibung wird ebenfalls zur Analyse, Optimierung und Präsentation des Modells verwendet. In jeder dieser Entwicklungsphasen wird eine unterschiedliche visuelle Darstellung benötigt, um den entsprechenden Nutzern ein geeignetes Feedback zu geben. Designer bevorzugen beispielsweise illustrative oder realistische Darstellungen, Ingenieure benötigen eine verständliche Visualisierung der Simulationsergebnisse, während eine immersive 3D Darstellung bei einer Benutzbarkeitsanalyse oder der Designauswahl hilfreich sein kann. Die interaktive Darstellung von NURBS-Modellen und -Simulationsdaten ist jedoch aufgrund des hohen Rechenaufwandes und der eingeschränkten Hardwareunterstützung eine große Herausforderung. Diese Arbeit stellt vier neuartige Verfahren vor, welche sich mit der interaktiven Darstellung von NURBS-Modellen und Simulationensdaten befassen. Die vorgestellten Algorithmen nutzen neue Fähigkeiten aktueller Grafikkarten aus, um den Stand der Technik bezüglich Qualität, Effizienz und Darstellungsgeschwindigkeit zu verbessern. Zwei dieser Verfahren befassen sich mit der direkten Darstellung der parametrischen Beschreibung ohne Approximationen oder zeitaufwändige Vorberechnungen. Die dabei vorgestellten Datenstrukturen und Algorithmen ermöglichen die effiziente Unterteilung, Klassifizierung, Tessellierung und Darstellung getrimmter NURBS-Flächen und einen interaktiven Ray-Casting-Algorithmus für die Isoflächenvisualisierung von NURBSbasierten isogeometrischen Analysen. Die weiteren zwei Verfahren beschreiben zum einen das vielseitige Konzept der programmierbaren Transparenz für illustrative und verständliche Visualisierungen tiefenkomplexer CAD-Modelle und zum anderen eine neue hybride Methode zur Reprojektion halbtransparenter und undurchsichtiger Bildinformation für die Beschleunigung der Erzeugung von stereoskopischen Bildpaaren. Die beiden letztgenannten Ansätze basieren auf rasterisierter Geometrie und sind somit ebenfalls für normale Dreiecksmodelle anwendbar, wodurch die Arbeiten auch einen wichtigen Beitrag in den Bereichen der Computergrafik und der virtuellen Realität darstellen. Die Auswertung der Arbeit wurde mit großen, realen NURBS-Datensätzen durchgeführt. Die Resultate zeigen, dass die direkte Darstellung auf Grundlage der parametrischen Beschreibung mit interaktiven Bildwiederholraten und in subpixelgenauer Qualität möglich ist. Die Einführung programmierbarer Transparenz ermöglicht zudem die Umsetzung kollaborativer 3D Interaktionstechniken für die Exploration der Modelle in virtuellenUmgebungen sowie illustrative und verständliche Visualisierungen tiefenkomplexer CAD-Modelle. Die Erzeugung stereoskopischer Bildpaare für die interaktive Visualisierung auf 3D Displays konnte beschleunigt werden. Diese messbare Verbesserung wurde zudem im Rahmen einer Nutzerstudie als wahrnehmbar und vorteilhaft befunden. N2 - In computer-aided design (CAD), industrial products are designed using a virtual 3D model. A CAD model typically consists of curves and surfaces in a parametric representation, in most cases, non-uniform rational B-splines (NURBS). The same representation is also used for the analysis, optimization and presentation of the model. In each phase of this process, different visualizations are required to provide an appropriate user feedback. Designers work with illustrative and realistic renderings, engineers need a comprehensible visualization of the simulation results, and usability studies or product presentations benefit from using a 3D display. However, the interactive visualization of NURBS models and corresponding physical simulations is a challenging task because of the computational complexity and the limited graphics hardware support. This thesis proposes four novel rendering approaches that improve the interactive visualization of CAD models and their analysis. The presented algorithms exploit latest graphics hardware capabilities to advance the state-of-the-art in terms of quality, efficiency and performance. In particular, two approaches describe the direct rendering of the parametric representation without precomputed approximations and timeconsuming pre-processing steps. New data structures and algorithms are presented for the efficient partition, classification, tessellation, and rendering of trimmed NURBS surfaces as well as the first direct isosurface ray-casting approach for NURBS-based isogeometric analysis. The other two approaches introduce the versatile concept of programmable order-independent semi-transparency for the illustrative and comprehensible visualization of depth-complex CAD models, and a novel method for the hybrid reprojection of opaque and semi-transparent image information to accelerate stereoscopic rendering. Both approaches are also applicable to standard polygonal geometry which contributes to the computer graphics and virtual reality research communities. The evaluation is based on real-world NURBS-based models and simulation data. The results show that rendering can be performed directly on the underlying parametric representation with interactive frame rates and subpixel-precise image results. The computational costs of additional visualization effects, such as semi-transparency and stereoscopic rendering, are reduced to maintain interactive frame rates. The benefit of this performance gain was confirmed by quantitative measurements and a pilot user study. KW - Rendering KW - CAD KW - NURBS KW - Computer-Aided Design KW - Isogeometric Analysis KW - Graphics hardware Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181120-38234 ER - TY - JOUR A1 - Benz, Alexander A1 - Taraben, Jakob A1 - Lichtenheld, Thomas A1 - Morgenthal, Guido A1 - Völker, Conrad T1 - Thermisch-energetische Gebäudesimulation auf Basis eines Bauwerksinformationsmodells JF - Bauphysik N2 - Für eine Abschätzung des Heizwärmebedarfs von Gebäuden und Quartieren können thermisch-energetische Simulationen eingesetzt werden. Grundlage dieser Simulationen sind geometrische und physikalische Gebäudemodelle. Die Erstellung des geometrischen Modells erfolgt in der Regel auf Basis von Bauplänen oder Vor-Ort-Begehungen, was mit einem großen Recherche- und Modellierungsaufwand verbunden ist. Spätere bauliche Veränderungen des Gebäudes müssen häufig manuell in das Modell eingearbeitet werden, was den Arbeitsaufwand zusätzlich erhöht. Das physikalische Modell stellt die Menge an Parametern und Randbedingungen dar, welche durch Materialeigenschaften, Lage und Umgebungs-einflüsse gegeben sind. Die Verknüpfung beider Modelle wird innerhalb der entsprechenden Simulations-software realisiert und ist meist nicht in andere Softwareprodukte überführbar. Mithilfe des Building Information Modeling (BIM) können Simulationsdaten sowohl konsistent gespeichert als auch über Schnittstellen mit entsprechenden Anwendungen ausgetauscht werden. Hierfür wird eine Methode vorgestellt, die thermisch-energetische Simulationen auf Basis des standardisierten Übergabe-formats Industry Foundation Classes (IFC) inklusive anschließender Auswertungen ermöglicht. Dabei werden geometrische und physikalische Parameter direkt aus einem über den gesamten Lebenszyklus aktuellen Gebäudemodell extrahiert und an die Simulation übergeben. Dies beschleunigt den Simulations-prozess hinsichtlich der Gebäudemodellierung und nach späteren baulichen Veränderungen. Die erarbeite-te Methode beruht hierbei auf einfachen Modellierungskonventionen bei der Erstellung des Bauwerksinformationsmodells und stellt eine vollständige Übertragbarkeit der Eingangs- und Ausgangswerte sicher. Thermal building simulation based on BIM-models. Thermal energetic simulations are used for the estimation of the heating demand of buildings and districts. These simulations are based on building models containing geometrical and physical information. The creation of geometrical models is usually based on existing construction plans or in situ assessments which demand a comparatively big effort of investigation and modeling. Alterations, which are later applied to the structure, request manual changes of the related model, which increases the effort additionally. The physical model represents the total amount of parameters and boundary conditions that are influenced by material properties, location and environmental influences on the building. The link between both models is realized within the correspondent simulation soft-ware and is usually not transferable to other software products. By Applying Building Information Modeling (BIM) simulation data is stored consistently and an exchange to other software is enabled. Therefore, a method which allows a thermal energetic simulation based on the exchange format Industry Foundation Classes (IFC) including an evaluation is presented. All geometrical and physical information are extracted directly from the building model that is kept up-to-date during its life cycle and transferred to the simulation. This accelerates the simulation process regarding the geometrical modeling and adjustments after later changes of the building. The developed method is based on simple conventions for the creation of the building model and ensures a complete transfer of all simulation data. KW - Gebäudehülle KW - Energiebedarf KW - Simulation KW - Schnittstelle KW - Building Information Modeling KW - Gebäudesimulation KW - BIM KW - IFC-basierte Gebäudesimulation KW - thermische Gebäudehülle KW - building simulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181102-38190 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/3835 N1 - Copyright 2018 Ernst & Sohn. Dieser Artikel kann für den persönlichen Gebrauch heruntergeladen werden. Andere Verwendungen bedürfen der vorherigen Zustimmung der Autoren und des Verlags Ernst & Sohn. Der folgende Artikel erschien in der Bauphysik 40 (2), 2018 und kann unter folgendem Link abgerufen werden. https://www.ernst-und-sohn.de/app/artikelrecherche/artikel.php?lang=de&ID=38470&utm_source=eus&utm_medium=artikel-db&utm_campaign=Bp_2018_2. IS - 40, Heft 2 SP - 61 EP - 67 ER - TY - JOUR A1 - Faizollahzadeh Ardabili, Sina A1 - Najafi, Bahman A1 - Alizamir, Meysam A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin A1 - Rabczuk, Timon T1 - Using SVM-RSM and ELM-RSM Approaches for Optimizing the Production Process of Methyl and Ethyl Esters JF - Energies N2 - The production of a desired product needs an effective use of the experimental model. The present study proposes an extreme learning machine (ELM) and a support vector machine (SVM) integrated with the response surface methodology (RSM) to solve the complexity in optimization and prediction of the ethyl ester and methyl ester production process. The novel hybrid models of ELM-RSM and ELM-SVM are further used as a case study to estimate the yield of methyl and ethyl esters through a trans-esterification process from waste cooking oil (WCO) based on American Society for Testing and Materials (ASTM) standards. The results of the prediction phase were also compared with artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS), which were recently developed by the second author of this study. Based on the results, an ELM with a correlation coefficient of 0.9815 and 0.9863 for methyl and ethyl esters, respectively, had a high estimation capability compared with that for SVM, ANNs, and ANFIS. Accordingly, the maximum production yield was obtained in the case of using ELM-RSM of 96.86% for ethyl ester at a temperature of 68.48 °C, a catalyst value of 1.15 wt. %, mixing intensity of 650.07 rpm, and an alcohol to oil molar ratio (A/O) of 5.77; for methyl ester, the production yield was 98.46% at a temperature of 67.62 °C, a catalyst value of 1.1 wt. %, mixing intensity of 709.42 rpm, and an A/O of 6.09. Therefore, ELM-RSM increased the production yield by 3.6% for ethyl ester and 3.1% for methyl ester, compared with those for the experimental data. KW - Biodiesel KW - Optimierung KW - extreme learning machine KW - machine learning KW - response surface methodology KW - support vector machine KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38170 UR - https://www.mdpi.com/1996-1073/11/11/2889 IS - 11, 2889 SP - 1 EP - 20 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ghazvinei, Pezhman Taherei A1 - Darvishi, Hossein Hassanpour A1 - Mosavi, Amir A1 - Yusof, Khamaruzaman bin Wan A1 - Alizamir, Meysam A1 - Shamshirband, Shahaboddin A1 - Chau, Kwok-Wing T1 - Sugarcane growth prediction based on meteorological parameters using extreme learning machine and artificial neural network JF - Engineering Applications of Computational Fluid Mechanics N2 - Management strategies for sustainable sugarcane production need to deal with the increasing complexity and variability of the whole sugar system. Moreover, they need to accommodate the multiple goals of different industry sectors and the wider community. Traditional disciplinary approaches are unable to provide integrated management solutions, and an approach based on whole systems analysis is essential to bring about beneficial change to industry and the community. The application of this approach to water management, environmental management and cane supply management is outlined, where the literature indicates that the application of extreme learning machine (ELM) has never been explored in this realm. Consequently, the leading objective of the current research was set to filling this gap by applying ELM to launch swift and accurate model for crop production data-driven. The key learning has been the need for innovation both in the technical aspects of system function underpinned by modelling of sugarcane growth. Therefore, the current study is an attempt to establish an integrate model using ELM to predict the concluding growth amount of sugarcane. Prediction results were evaluated and further compared with artificial neural network (ANN) and genetic programming models. Accuracy of the ELM model is calculated using the statistics indicators of Root Means Square Error (RMSE), Pearson Coefficient (r), and Coefficient of Determination (R2) with promising results of 0.8, 0.47, and 0.89, respectively. The results also show better generalization ability in addition to faster learning curve. Thus, proficiency of the ELM for supplementary work on advancement of prediction model for sugarcane growth was approved with promising results. KW - Künstliche Intelligenz KW - Sustainable production KW - ELM KW - prediction KW - machine learning KW - sugarcane KW - estimation KW - growth mode KW - extreme learning machine KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181017-38129 UR - https://www.tandfonline.com/doi/full/10.1080/19942060.2018.1526119 VL - 2018 IS - 12,1 SP - 738 EP - 749 PB - Taylor & Francis ER - TY - THES A1 - Vesper, Andreas T1 - Entwicklung eines Berechnungsverfahrens zur Ermittlung der Kapazität in lichtsignalgeregelten Zufahrten mit zusätzlichen Aufstellstreifen bei gleichzeitiger Freigabezeit N2 - Im Rahmen der Dissertation ist ein analytisches Berechnungsverfahren zur Ermittlung der Kapazität in lichtsignalgeregelten Zufahrten mit zusätzlichen Aufstellstreifen bei gleichzeitiger Freigabezeit entwickelt worden, dass sich durch folgende Eigenschaften auszeichnet: a) einfaches Berechnungsverfahren – Ansatz eines einfachen linearen Berechnungsansatzes, der auf den Grundzusammenhängen des Verkehrsablaufs in lichtsignalgeregelten Zufahrten aufbaut, b) breites Anwendungsgebiet – Berechnungsverfahren kann in Zufahrten mit bis zu zwei zusätzlichen Aufstellstreifen angewendet werden, c) hohe Genauigkeit – Im Rahmen eines direkten Vergleichs konnte u. a. gezeigt werden, dass mit dem hergeleiteten analytischen Berechnungsverfahren genauere Kapazitätswerte ermittelt werden können, als mit dem Berechnungsverfahren nach HBS 2015. KW - Verkehrssignalanlage KW - Kapazität KW - Abbiegespur KW - Lichtsignalsteuerung KW - Lichtsignalanlage KW - Aufstellstreifen KW - Zufahrt KW - Berechnungsverfahren Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180925-37895 ER - TY - THES A1 - Michel, Ralf T1 - Licht – Farbe – Licht : Zur Integration von Design und Technik in der Designforschung mit Licht und Farbe N2 - Die Thesis untersucht am Beispiel von Farb-Licht Forschungen (Interaktion dynamischen Lichts mit farbigen Oberflächen) und der Designforschungen am Potenzial der organisch Licht emittierenden Dioden (OLED) integrierende Aspekte des Designs im Kontext dieser Technologien. Des weiteren reflektiert die Thesis am Beispiel dieser Designforschungen das Verhältnis von Designforschung und Innovation für die gestalterischen Disziplinen. KW - Design KW - Integrative Gestaltung KW - Designforschung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180921-37941 ER - TY - THES A1 - Hawranke, Thomas T1 - Modding - Künstlerische Forschung in Computerspielen N2 - Die hier vorliegende Arbeit befasst sich mit dem Modifizieren von Computerspielen (Modding). Die Annäherung an das Modding geschieht aus zwei unterschiedlichen Blickrichtungen: Zum einen wird mit einem analytischen Blick auf das Themenfeld geschaut, der das bereits Erforschte mit den eigenen Suchbewegungen kombiniert. Zum anderen wird die Perspektive der Handlung eingenommen, die sich in der Widerständigkeit des Materials, der Werkzeuge und der Spieltechnologie äußert. Im Mittelpunkt der Auseinandersetzung stehen das Modding als Praxis, die Mods als Derivate und die Erforschung des Computerspiels mit den Praktiken und Derivaten des Modifizierens. Das Modding wird so zu einer epistemischen Praxis des Computerspiels. Die hier formulierten Überlegungen zum Modding, als eine forschende Praxis des Computerspiels, präsentieren eine Vorgehensweise, die ästhetische, widerständige und stabilisierende Aspekte in sich vereint. Sie dient der Erforschung des Computerspiels entlang seiner Diskussionen, Materialien, Technologien und Praktiken und fokussiert hierbei auf das Abseitige, dass als integraler Bestandteil des Computerspiels verstanden wird. Mit diesem Blick auf die Grenzen des Computerspielens werden Dinge sichtbar, die zwar Teil der synthetischen Computerspielwelten sind, durch dessen Inszenierungen und Atmosphären jedoch verschleiert werden. Der hier entwickelte Ansatz ermöglicht einen Perspektivenwechsel innerhalb dieser Welten und die Erforschung des Computerspiels unter besonderer Berücksichtigung seiner eingeschriebenen Normen und Machtverhältnissen. Das Modding dient hierbei als eine kritische Praxis zur Entschlüsselung dieser medial vermittelten Konstellationen. KW - Künstlerische Forschung KW - Computerspiel KW - Spielwissenschaft KW - Praxeologie KW - Medienkunst KW - Modding KW - Computerspiel KW - Art-Mods KW - Künstlerische Forschung KW - Artistic Research Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180919-37886 ER - TY - GEN A1 - Nawaz Khan, Shah T1 - Numerical analysis of deformation and stability in the formation for railway tracks N2 - Over the past few decades, the increasing demands of railways operations in the form of heavy loading and high speed have been noticed. Railway formation and ballast deform progressive under heavy axle cyclic loading, therefore the rail track needs proper design of ballast and formation bed to achieve the desire stiffness and stability for the safe and sound serviceability of the track. For the overall stability of the track on soft formation, the ground is improved by different techniques prior to the construction on that, in order to avoid the failure and differential settlement during the designed trains operation. The numerical analyses illustrate that the total deformation and bearing capacity of the railway tracks mostly depend on the changes in the friction angle and cohesion of the selected soils of the subgrade. To avoid failure in the formation of track under the design loads, the proper selection of types of soils, its layer thickness, well compaction during construction and provision of proper track drainage system are extremely important. For the construction of new railway tracks the soils having greater values of friction angle, cohesion and elastic stiffness with the well graded ballast cushion under the sleepers of designed side slopes can be used to reduce the maintenance cost, considerably increase the life time of the components of the tracks and ultimately give better performance of the tracks. KW - Eisenbahnstrecke KW - railway track KW - ballast KW - PLAXIS 2D KW - numerical modeling KW - track maintenance KW - subgrade KW - drainage Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180907-37867 ER - TY - INPR A1 - Mosavi, Amir A1 - Moeini, Iman A1 - Ahmadpour, Mohammad A1 - Alharbi, Naif A1 - E. Gorji, Nima T1 - Modeling the time-dependent characteristics of perovskite solar cells N2 - We proposed two different time-dependent modeling approaches for variation of device characteristics of perovskite solar cells under stress conditions. The first approach follows Sah-Noyce-Shockley (SNS) model based on Shockley–Read–Hall recombination/generation across the depletion width of pn junction and the second approach is based on thermionic emission model for Schottky diodes. The connecting point of these approaches to time variation is the time-dependent defect generation in depletion width (W) of the junction. We have fitted the two models with experimental data reported in the literature to perovskite solar cell and found out that each model has a superior explanation for degradation of device metrics e.g. current density and efficiency by time under stress conditions. Nevertheless, the Sah-Noyce-Shockley model is more reliable than thermionic emission at least for solar cells. KW - Solarzelle KW - Solar KW - Solar cells KW - Modeling KW - Time-dependent KW - Defect generation KW - Perovskite Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180907-37573 N1 - Published in final form at https://doi.org/10.1016/j.solener.2018.05.082. ER - TY - INPR A1 - Mosavi, Amir A1 - Torabi, Mehrnoosh A1 - Hashemi, Sattar A1 - Saybani, Mahmoud Reza A1 - Shamshirband, Shahaboddin T1 - A Hybrid Clustering and Classification Technique for Forecasting Short-Term Energy Consumption N2 - Electrical energy distributor companies in Iran have to announce their energy demand at least three 3-day ahead of the market opening. Therefore, an accurate load estimation is highly crucial. This research invoked methodology based on CRISP data mining and used SVM, ANN, and CBA-ANN-SVM (a novel hybrid model of clustering with both widely used ANN and SVM) to predict short-term electrical energy demand of Bandarabbas. In previous studies, researchers introduced few effective parameters with no reasonable error about Bandarabbas power consumption. In this research we tried to recognize all efficient parameters and with the use of CBA-ANN-SVM model, the rate of error has been minimized. After consulting with experts in the field of power consumption and plotting daily power consumption for each week, this research showed that official holidays and weekends have impact on the power consumption. When the weather gets warmer, the consumption of electrical energy increases due to turning on electrical air conditioner. Also, con-sumption patterns in warm and cold months are different. Analyzing power consumption of the same month for different years had shown high similarity in power consumption patterns. Factors with high impact on power consumption were identified and statistical methods were utilized to prove their impacts. Using SVM, ANN and CBA-ANN-SVM, the model was built. Sine the proposed method (CBA-ANN-SVM) has low MAPE 5 1.474 (4 clusters) and MAPE 5 1.297 (3 clusters) in comparison with SVM (MAPE 5 2.015) and ANN (MAPE 5 1.790), this model was selected as the final model. The final model has the benefits from both models and the benefits of clustering. Clustering algorithm with discovering data structure, divides data into several clusters based on similarities and differences between them. Because data inside each cluster are more similar than entire data, modeling in each cluster will present better results. For future research, we suggest using fuzzy methods and genetic algorithm or a hybrid of both to forecast each cluster. It is also possible to use fuzzy methods or genetic algorithms or a hybrid of both without using clustering. It is issued that such models will produce better and more accurate results. This paper presents a hybrid approach to predict the electric energy usage of weather-sensitive loads. The presented methodutilizes the clustering paradigm along with ANN and SVMapproaches for accurate short-term prediction of electric energyusage, using weather data. Since the methodology beinginvoked in this research is based on CRISP data mining, datapreparation has received a gr eat deal of attention in thisresear ch. Once data pre-processing was done, the underlyingpattern of electric energy consumption was extracted by themeans of machine learning methods to precisely forecast short-term energy consumption. The proposed approach (CBA-ANN-SVM) was applied to real load data and resulting higher accu-racy comparing to the existing models. 2018 American Institute of Chemical Engineers Environ Prog, 2018 https://doi.org/10.1002/ep.12934 KW - Data Mining KW - support vector machine (SVM) KW - Machine Learning KW - forecasting KW - Prediction KW - Electric Energy Consumption KW - clustering KW - artificial neural networks (ANN) Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180907-37550 N1 - This is the pre-peer reviewed version of the following article: https://onlinelibrary.wiley.com/doi/10.1002/ep.12934, which has been published in final form at https://doi.org/10.1002/ep.12934. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. ER - TY - JOUR A1 - Bumberger, Jan A1 - Mai, Juliane A1 - Schmidt, Felix A1 - Lünenschloß, Peter A1 - Wagner, Norman A1 - Töpfer, Hannes T1 - Spatial Retrieval of Broadband Dielectric Spectra JF - Sensors N2 - A broadband soil dielectric spectra retrieval approach ( 1 MHz– 2 GHz) has been implemented for a layered half space. The inversion kernel consists of a two-port transmission line forward model in the frequency domain and a constitutive material equation based on a power law soil mixture rule (Complex Refractive Index Model - CRIM). The spatially-distributed retrieval of broadband dielectric spectra was achieved with a global optimization approach based on a Shuffled Complex Evolution (SCE) algorithm using the full set of the scattering parameters. For each layer, the broadband dielectric spectra were retrieved with the corresponding parameters thickness, porosity, water saturation and electrical conductivity of the aqueous pore solution. For the validation of the approach, a coaxial transmission line cell measured with a network analyzer was used. The possibilities and limitations of the inverse parameter estimation were numerically analyzed in four scenarios. Expected and retrieved layer thicknesses, soil properties and broadband dielectric spectra in each scenario were in reasonable agreement. Hence, the model is suitable for an estimation of in-homogeneous material parameter distributions. Moreover, the proposed frequency domain approach allows an automatic adaptation of layer number and thickness or regular grids in time and/or space. KW - Theoretische Elektrotechnik KW - electromagnetic scattering KW - microwave propagation KW - dielectric materials KW - dielectric measurements Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180906-37831 UR - http://www.mdpi.com/1424-8220/18/9/2780 SP - 1 EP - 22 ER - TY - CHAP ED - Steiner, Maria ED - Theiler, Michael ED - Mirboland, Mahsa T1 - 30. Forum Bauinformatik N2 - Die Bauhaus-Universität Weimar ist seit langer Zeit mit dem Forum Bauinformatik eng verbunden. So wurde die Veranstaltung 1989 hier durch den Arbeitskreis Bauinformatik ins Leben gerufen und auch das 10. und 18. Forum Bauinformatik (1998 bzw. 2006) fand in Weimar statt. In diesem Jahr freuen wir uns daher besonders, das 30. Jubiläum an der Bauhaus-Universität Weimar ausrichten zu dürfen und viele interessierte Wissenschaftler und Wissenschaftlerinnen aus dem Bereich der Bauinformatik in Weimar willkommen zu heißen. Das Forum Bauinformatik hat sich längst zu einem festen Bestandteil der Bauinformatik im deutschsprachigen Raum entwickelt. Dabei steht es traditionsgemäß unter dem Motto „von jungen Forschenden für junge Forschende“, wodurch insbesondere Nachwuchswissenschaftlerinnen und ‑wissenschaftlern die Möglichkeit geboten wird, ihre Forschungsarbeiten zu präsentieren, Problemstellungen fachspezifisch zu diskutieren und sich über den neuesten Stand der Forschung zu informieren. Zudem wird eine ausgezeichnete Gelegenheit geboten, in die wissenschaftliche Gemeinschaft im Bereich der Bauinformatik einzusteigen und Kontakte mit anderen Forschenden zu knüpfen. In diesem Jahr erhielten wir 49 interessante und qualitativ hochwertige Beiträge vor allem in den Themenbereichen Simulation, Modellierung, Informationsverwaltung, Geoinformatik, Structural Health Monitoring, Visualisierung, Verkehrssimulation und Optimierung. Dafür möchten wir uns ganz besonders bei allen Autoren, Co-Autoren und Reviewern bedanken, die durch ihr Engagement das diesjährige Forum Bauinformatik erst möglich gemacht haben. Wir danken zudem Professor Große und Professor Díaz für die Unterstützung bei der Auswahl der Beiträge für die Best Paper Awards. Ein herzliches Dankeschön geht an die Kollegen an der Professur Informatik im Bauwesen der Bauhaus-Universität Weimar für die organisatorische, technische und beratende Unterstützung während der Planung der Veranstaltung. KW - Bauinformatik KW - BIM Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180917-37854 N1 - Printausgabe: ISBN 978-3-00-060726-4 ER - TY - THES A1 - Hommel, Angela T1 - Diskret holomorphe Funktionen und deren Bedeutung bei der Lösung von Differenzengleichungen N2 - Auf der Grundlage diskreter Cauchy-Riemann Operatoren werden diskret holomorphe Funktionen definiert und detailliert studiert. Darauf aufbauend wird die Lösung von Differenzengleichungen mit Hilfe der diskret holomorphen Funktionen beschrieben. KW - Differenzengleichung KW - Holomorphe Funktion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180827-37846 ER - TY - THES A1 - Behkalam, Kaya T1 - Seeing History - The Augmented Archive N2 - SEEING HISTORY - THE AUGMENTED ARCHIVE erforscht – in Theorie und Praxis – die Medialitäten des Archivs in Zeiten des Übergangs vom Speichermedium hin zum Modus des Übertragens. Am Beispiel Ägyptens seit den politischen Umwälzungen 2011 wird ein neues Archivsystem entwickelt, das mit Hilfe von Augmented Reality Technologie - d.h. der virtuellen Erweiterung des Realraums von mobiler Videotechnik durch Metainformationen - das umfassendste bestehende Videoarchiv zur ägyptischen Revolution im Stadtraum Kairos per GPS-Kodierung zur Verfügung stellt. KW - Medienkunst KW - Erweiterte Realität KW - Medienereignis KW - Medienarchäologie KW - Arabischer Frühling Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180822-37818 ER -