TY - JOUR A1 - Ilyani Akmar, A.B. A1 - Lahmer, Tom A1 - Bordas, Stéphane Pierre Alain A1 - Beex, L.A.A. A1 - Rabczuk, Timon T1 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties JF - Composite Structures N2 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.compstruct.2014.04.014 SP - 1 EP - 17 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Rafiee, Roham A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling JF - Computational Materials Science N2 - Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 295 EP - 305 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Barbosa, J.I. T1 - The extended unsymmetric frontal solution for multiple-point constraints JF - Engineering Computations N2 - The extended unsymmetric frontal solution for multiple-point constraints KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Kou, Liangzhi A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures JF - Nanotechnology N2 - Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1088/0957-4484/25/29/295701 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Lahmer, Tom A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) JF - Composites Part B Engineering N2 - Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 80 EP - 95 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Lahmer, Tom A1 - Keitel, Holger A1 - Zhao, Jun-Hua A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations JF - Mechanics of Materials N2 - Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 70 EP - 84 ER - TY - JOUR A1 - Adamatzky, Andrew A1 - Schubert, Theresa T1 - Slime mold microfluidic logical gates JF - Materials Today N2 - We demonstrate how logical operations can be implemented in ensembles of protoplasmic tubes of acellular slime mold Physarum polycephalum. The tactile response of the protoplasmic tubes is used to actuate analogs of two- and four-input logical gates and memory devices. The slime mold tube logical gates display results of logical operations by blocking flow in mechanically stimulated tube fragments and redirecting the flow to output tube fragments. We demonstrate how XOR and NOR gates are constructed. We also exemplify circuits of hybrid gates and a memory device. The slime mold based gates are non-electronic, simple and inexpensive, and several gates can be realized simultaneously at sites where protoplasmic tubes merge. KW - Physarum polycephalum KW - protoplasmic tubes, Nucleolus-Organisator-Region Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31168 SP - 86 EP - 91 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements JF - Structural and Multidisciplinary Optimization N2 - Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Beex, L.A.A. A1 - Kerfriden, Pierre A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain T1 - Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation JF - Computer Methods in Applied Mechanics and Engineering N2 - Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Wang, Bing-Shen A1 - Rabczuk, Timon T1 - Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation JF - Nanotechnology N2 - Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Amiri, Fatemeh A1 - Millán, D. A1 - Shen, Y. A1 - Rabczuk, Timon A1 - Arroyo, M. T1 - Phase-field modeling of fracture in linear thin shells JF - Theoretical and Applied Fracture Mechanics N2 - Phase-field modeling of fracture in linear thin shells KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 102 EP - 109 ER - TY - JOUR A1 - Jamshidian, M. A1 - Rabczuk, Timon T1 - Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale JF - Journal of Computational Physics N2 - Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 23 EP - 35 ER - TY - JOUR A1 - Nagel, Falk A1 - Simon, Flaviu A1 - Kümmel, Benjamin A1 - Bergmann, Jean Pierre A1 - Hildebrand, Jörg T1 - Optimization Strategies for Laser Welding High Alloy Steel Sheets JF - Physics Procedia N2 - A known phenomenon during laser welding of thin sheets is the deformation caused by thermally induced stresses. This deformation can result in a change of the gap width between the welded parts, which leads to an unstable welding process. Inducing displacements by using a second heat source will compensate for the change in gap width, hence optimizing the welding process. The base material is 1 mm thick austenitic stainless steel 1.4301, which is welded by a CO2 laser. The second heat source is a diode laser. The gap between the welded parts was set between 0.05 mm and 0.1 mm. The influence of the second heat source on the welding process and the welding result is described. The usage of a second heat source allows a higher gap width to be set prior to the welding process. The results of the numerical simulation were found to be corresponding to those of the experiments. KW - Edelstahl KW - Laserschweißen KW - Laser Welding; CO2; Diode; Distortion; Finite Element Analysis; Thermal Analysis; Mechanical Analysis; Numerical Model Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31554 SP - 1242 EP - 1251 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Optimization of fiber distribution in fiber reinforced composite by using NURBS functions JF - Computational Materials Science N2 - Optimization of fiber distribution in fiber reinforced composite by using NURBS functions KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 463 EP - 473 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Park, Harold S. A1 - Rabczuk, Timon T1 - MoS2 nanoresonators: intrinsically better than graphene? JF - Nanoscale N2 - MoS2 nanoresonators: intrinsically better than graphene? KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 3618 EP - 3625 ER - TY - JOUR A1 - Völker, Conrad A1 - Mämpel, Silvio A1 - Kornadt, Oliver T1 - Measuring the human body’s micro‐climate using a thermal manikin JF - Indoor Air N2 - The human body is surrounded by a micro‐climate which results from its convective release of heat. In this study, the air temperature and flow velocity of this micro‐climate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the micro‐climate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the micro‐climate shape strongly depends not only on the body segment, but also on boundary conditions: the higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the air flow in the micro‐climate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient. KW - Raumklima KW - Mikroklima KW - Wärmeübertragung KW - Strömungsmechanik KW - thermal manikin KW - climate chamber KW - micro climate KW - heat transfer coefficient KW - CFD KW - thermography Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38153 UR - https://onlinelibrary.wiley.com/doi/abs/10.1111/ina.12112 N1 - This is the peer reviewed version of the following article: "Measuring the human body’s micro‐climate using a thermal manikin", which has been published in final form at https://doi.org/10.1111/ina.12112. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. IS - 24, 6 SP - 567 EP - 579 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Mabrouki, Tarek A1 - Fontaine, Michaël A1 - Gong, Yadong A1 - Rabczuk, Timon T1 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation JF - Composites Part B Engineering N2 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 27 EP - 33 ER - TY - JOUR A1 - Nguyen, V.P. A1 - Kerfriden, Pierre A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm JF - Computer-Aided Design N2 - Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Thai, Chien H. A1 - Ferreira, A.J.M. A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung T1 - Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory JF - European Journal of Mechanics N2 - Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 89 EP - 108 ER - TY - JOUR A1 - Masood, R. A1 - Kharal, M. K. N. A1 - Nasir, A.R. T1 - Is BIM Adoption Advantageous for Construction Industry of Pakistan? JF - Procedia Engineering N2 - Lack of Information technology applications on construction projects lead to complex flow of data during project life cycle. Building Information Modeling (BIM) has gained attention in the Architectural, Engineering and Construction (AEC) industry, envisage the use of virtual n-dimensional (n-D) models to identify potential conflicts in design, construction or operational of any facility. A questionnaire has been designed to investigate perceptions regarding BIM advantages. Around 102 valid responses received from diversified stakeholders. Results showed very low BIM adoption with low level of ‘Buzz’. BIM is a faster and more effective method for designing and construction management, it improves quality of the design and construction and reduces rework during construction; which came out as the top thee advantages according to the perception of AEC professionals of Pakistan.BIM has least impact on reduction of cost, time and human resources. This research is a bench mark study to understand adoption and advantageous of BIM in Pakistan Construction Industry. KW - Building Information Modeling KW - Bauindustrie KW - Pakistan KW - BIM, BIM Adoption, BIM Advantages , Construction Industry, Pakistan Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31509 SP - 229 EP - 238 ER -