TY - JOUR A1 - Talebi, Hossein A1 - Zi, Goangseup A1 - Silani, Mohammad A1 - Samaniego, Esteban A1 - Rabczuk, Timon T1 - A simple circular cell method for multilevel finite element analysis JF - Journal of Applied Mathematics N2 - A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed. KW - Finite-Elemente-Methode KW - Feststoff Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31639 ER - TY - JOUR A1 - Hildebrand, Jörg A1 - Hecht, Kerstin A1 - Bliedtner, Jens A1 - Müller, Hartmut T1 - Advanced Analysis of Laser Beam Polishing of Quartz Glass Surfaces JF - Physics Procedia N2 - The laser beam is a small, flexible and fast polishing tool. With laser radiation it is possible to finish many outlines or geometries on quartz glass surfaces in the shortest possible time. It’s a fact that the temperature developing while polishing determines the reachable surface smoothing and, as a negative result, causes material tensions. To find out which parameters are important for the laser polishing process and the surface roughness respectively and to estimate material tensions, temperature simulations and extensive polishing experiments took place. During these experiments starting and machining parameters were changed and temperatures were measured contact-free. The accuracy of thermal and mechanical simulation was improved in the case of advanced FE-analysis. KW - Laser KW - Berührungslose Messung KW - Polieren KW - Empfindlichkeit KW - Quarzglas KW - laser; contactless measurement; quartz glass; polishing; temperature; residual stress; simulation; sensitivity Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170418-31372 UR - http://www.sciencedirect.com/science/article/pii/S1875389212025667 SP - 277 EP - 285 ER - TY - JOUR A1 - Aguinaga, José Guillermo De T1 - Error in prediction due to data type availability in a coupled hydro-mechanical model JF - Electronic Journal of Geotechnical Engineering N2 - Different types of data provide different type of information. The present research analyzes the error on prediction obtained under different data type availability for calibration. The contribution of different measurement types to model calibration and prognosis are evaluated. A coupled 2D hydro-mechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are identified by scaled sensitivities. Then, Particle Swarm Optimization is applied to determine the optimal parameter values and finally, the error in prognosis is determined. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain the actual prediction errors. The analyses presented here were performed calibrating the hydro-mechanical model to 31 data sets of 100 observations of varying data types. The prognosis results improve when using diversified information for calibration. However, when using several types of information, the number of observations has to be increased to be able to cover a representative part of the model domain. For an analysis with constant number of observations, a compromise between data type availability and domain coverage proves to be the best solution. Which type of calibration information contributes to the best prognoses could not be determined in advance. The error in model prognosis does not depend on the error in calibration, but on the parameter error, which unfortunately cannot be determined in inverse problems since we do not know its real value. The best prognoses were obtained independent of calibration fit. However, excellent calibration fits led to an increase in prognosis error variation. In the case of excellent fits; parameters' values came near the limits of reasonable physical values more often. To improve the prognoses reliability, the expected value of the parameters should be considered as prior information on the optimization algorithm. KW - Sensitivitätsanalyse KW - Damm KW - Embankment, sensitivity analysis, parameter identification, Particle Swarm Optimization KW - Fehlerabschätzung Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31170 UR - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84868020397&partnerID=40&md5=72c87bb112839303c1ef9a4afa8c6421 SP - 2459 EP - 2471 ER - TY - JOUR A1 - Knecht, Katja A1 - König, Reinhard T1 - Automatische Grundstücksumlegung mithilfe von Unterteilungsalgorithmen und typenbasierte Generierung von Stadtstrukturen N2 - Dieses Arbeitspapier beschreibt, wie ausgehend von einem vorhandenen Straßennetzwerk Bebauungsareale mithilfe von Unterteilungsalgorithmen automatisch umgelegt, d.h. in Grundstücke unterteilt, und anschließend auf Basis verschiedener städtebaulicher Typen bebaut werden können. Die Unterteilung von Bebauungsarealen und die Generierung von Bebauungsstrukturen unterliegen dabei bestimmten stadtplanerischen Einschränkungen, Vorgaben und Parametern. Ziel ist es aus den dargestellten Untersuchungen heraus ein Vorschlagssystem für stadtplanerische Entwürfe zu entwickeln, das anhand der Umsetzung eines ersten Softwareprototyps zur Generierung von Stadtstrukturen weiter diskutiert wird. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 15 KW - Automatisierung KW - Grundstücksumlegung KW - städtische Strukturen KW - Unterteilungsalgorithmen KW - Computational Design Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26730 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Köhler, Hermann A1 - König, Reinhard T1 - Aktionsräume in Dresden N2 - In vorliegender Studie werden die Aktionsräume von Befragten in Dresden über eine standardisierte Befragung (n=360) untersucht. Die den Aktionsräumen zugrundeliegenden Aktivitäten werden unterschieden in Einkaufen für den täglichen Bedarf, Ausgehen (z.B. in Café, Kneipe, Gaststätte), Erholung im Freien (z.B. spazieren gehen, Nutzung von Grünanlagen) und private Geselligkeit (z.B. Feiern, Besuch von Verwandten/Freunden). Der Aktionsradius wird unterschieden in Wohnviertel, Nachbarviertel und sonstiges weiteres Stadtgebiet. Um aus den vier betrachteten Aktivitäten einen umfassenden Kennwert für den durchschnittlichen Aktionsradius eines Befragten zu bilden, wird ein Modell für den Kennwert eines Aktionsradius entwickelt. Die Studie kommt zu dem Ergebnis, dass das Alter der Befragten einen signifikanten – wenn auch geringen – Einfluss auf den Aktionsradius hat. Das Haushaltsnettoeinkommen hat einen mit Einschränkung signifikanten, ebenfalls geringen Einfluss auf alltägliche Aktivitäten der Befragten. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 14 KW - Aktionsraumforschung KW - Quantitative Sozialforschung KW - Dresden Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26726 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Tonn, Christian A1 - Tatarin, René T1 - Volumen Rendering in der Architektur: Überlagerung und Kombination von 3D Voxel Volumendaten mit 3D Gebäudemodellen N2 - Volumerendering ist eine Darstellungstechnik, um verschiedene räumliche Mess- und Simulationsdaten anschaulich, interaktiv grafisch darzustellen. Im folgenden Beitrag wird ein Verfahren vorgestellt, mehrere Volumendaten mit einem Architekturflächenmodell zu überlagern. Diese komplexe Darstellungsberechnung findet mit hardwarebeschleunigten Shadern auf der Grafikkarte statt. Im Beitrag wird hierzu der implementierte Softwareprototyp "VolumeRendering" vorgestellt. Neben dem interaktiven Berechnungsverfahren wurde ebenso Wert auf eine nutzerfreundliche Bedienung gelegt. Das Ziel bestand darin, eine einfache Bewertung der Volumendaten durch Fachplaner zu ermöglichen. Durch die Überlagerung, z. B. verschiedener Messverfahren mit einem Flächenmodell, ergeben sich Synergien und neue Auswertungsmöglichkeiten. Abschließend wird anhand von Beispielen aus einem interdisziplinären Forschungsprojekt die Anwendung des Softwareprototyps illustriert. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 13 KW - Multiple Volume Rendering KW - Overlay KW - 3D Surface Models Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26718 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Köhler, Hermann T1 - Ergebnisse der Befragung zu Wohnstandortpräferenzen von Lebensweltsegmenten in Dresden N2 - In vorliegender Studie werden die Wohnstandortpräferenzen der Sinus-Milieugruppen in Dresden über eine standardisierte Befragung (n=318) untersucht. Es wird unterschieden zwischen handlungsleitenden Wohnstandortpräferenzen, die durch Anhaltspunkte auf der Handlungsebene stärker in Betracht gezogen werden sollten, und Wohnstandortpräferenzen, welche eher orientierenden Charakter haben. Die Wohnstandortpräferenzen werden untersucht anhand der Kategorien Ausstattung/Zustand der Wohnung/des näheren Wohnumfeldes, Versorgungsstruktur, soziales Umfeld, Baustrukturtyp, Ortsgebundenheit sowie des Aspektes des Images eines Stadtviertels. Um die Befragten den Sinus-Milieugruppen zuordnen zu können, wird ein Lebensweltsegment-Modell entwickelt, welches den Anspruch hat, die Sinus-Milieugruppen in der Tendenz abzubilden. Die Studie kommt zu dem Ergebnis, dass die Angehörigen der verschiedenen Lebensweltsegmente in jeder Kategorie - wenn auch z.T. auf geringerem Niveau - signifikante Unterschiede in der Bewertung einzelner Wohnstandortpräferenzen aufweisen. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 12 KW - Milieuforschung KW - Residentielle Mobilität KW - Wohnstandortpräferenzen KW - Wohnstandortentscheidungen KW - Quantitative Sozialforschung Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26704 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Kalisch, Dominik T1 - Wissen wer wo wohnt N2 - In cities people live together in neighbourhoods. Here they can find the infrastructure they need, starting with shops for the daily purpose to the life-cycle based infrastructures like kindergartens or nursing homes. But not all neighbourhoods are identical. The infrastructure mixture varies from neighbourhood to neighbourhood, but different people have different needs which can change e.g. based on the life cycle situation or their affiliation to a specific milieu. We can assume that a person or family tries to settle in a specific neighbourhood that satisfies their needs. So, if the residents are happy with a neighbourhood, we can further assume that this neighbourhood satisfies their needs. The socio-oeconomic panel (SOEP) of the German Institute for Economy (DIW) is a survey that investigates the economic structure of the German population. Every four years one part of this survey includes questions about what infrastructures can be found in the respondents neighbourhood and the satisfaction of the respondent with their neighbourhood. Further, it is possible to add a milieu estimation for each respondent or household. This gives us the possibility to analyse the typical neighbourhoods in German cities as well as the infrastructure profiles of the different milieus. Therefore, we take the environment variables from the dataset and recode them into a binary variable – whether an infrastructure is available or not. According to Faust (2005), these sets can also be understood, as a network of actors in a neighbourhood, which share two, three or more infrastructures. Like these networks, this neighbourhood network can also be visualized as a bipartite affiliation network and therefore analysed using correspondence analysis. We will show how a neighbourhood analysis will benefit from an upstream correspondence analysis and how this could be done. We will also present and discuss the results of such an analysis. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 11 KW - urban planning KW - cluster analysis KW - urban research-quantitative KW - complex data analysis KW - singular value decomposition Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26695 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER -