TY - THES A1 - Danckwerth, Julia T1 - Strategien der Sichtbarkeit und Sichtbarmachung von ‚Wearable Enhancement‘ im Bereich Smart Health N2 - Die vorliegende Forschungsarbeit befasst sich mit der Entwicklung und Gestaltung von körpernahen, tragbaren Artefakten für den digitalisierten Gesundheitsbereich. Unter dem entwickelten Begriff des Wearable Enhancements werden die verschiedenen Termini aus smarten Textilien, Fashion Technologies, Wearable Technologies sowie elektronischen Textilien zusammengefasst und zwei zentrale Forschungsfragen untersucht. Wie kann Wearable Enhancement im Bereich Smart Health ethisch, sozial und ökologisch entwickelt und gestaltet werden? Inwiefern können textile Schnittstellen die Wahrnehmung und die Wahrnehmbarkeit des Körpers verändern? Mit der ersten Forschungsfrage sollen vorrangig Ansätze und Strategien der Sichtbarkeit für die Entwicklung und Gestaltung diskutiert werden, welche Aussagen für die Designpraxis, den Gestaltungs- und Designforschungsprozess sowie die Designlösungen selbst generieren sollen. Die zweite Forschungsfrage zielt darauf, Formen der Sichtbarmachung von sowie für Wearable Enhancement zu untersuchen. Anhand von drei konkreten Fallstudien werden wesentliche Aspekte der Rezeption, Perzeption, Konstruktion, Konfiguration und Konzeption von soziotechnischen Artefakten zur Funktionssteigerung des menschlichen Körpers untersucht und verschiedene Formen der Sichtbarkeit und Sichtbarmachung entwickelt. In der Arbeit wird ein dual-angelegter transdisziplinärer Designforschungsansatz entwickelt und praktiziert, welcher sowohl die menschlichen Bedürfnisse der Nutzer*innen als auch die Weiterentwicklung von Technologien berücksichtigt. Auf dieser Grundlage wird versucht Anregungen für ein zukunftsfähiges und zugleich verantwortungsorientiertes Design zu geben. KW - Design KW - Wearable Computing KW - Künstlerische Forschung KW - Digital Health KW - Smart Health KW - Smart Textiles KW - Designforschung KW - Wearable Technology Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220202-45768 ER - TY - THES A1 - López Zermeño, Jorge Alberto T1 - Isogeometric and CAD-based methods for shape and topology optimization: Sensitivity analysis, Bézier elements and phase-field approaches N2 - The Finite Element Method (FEM) is widely used in engineering for solving Partial Differential Equations (PDEs) over complex geometries. To this end, it is required to provide the FEM software with a geometric model that is typically constructed in a Computer-Aided Design (CAD) software. However, FEM and CAD use different approaches for the mathematical description of the geometry. Thus, it is required to generate a mesh, which is suitable for FEM, based on the CAD model. Nonetheless, this procedure is not a trivial task and it can be time consuming. This issue becomes more significant for solving shape and topology optimization problems, which consist in evolving the geometry iteratively. Therefore, the computational cost associated to the mesh generation process is increased exponentially for this type of applications. The main goal of this work is to investigate the integration of CAD and CAE in shape and topology optimization. To this end, numerical tools that close the gap between design and analysis are presented. The specific objectives of this work are listed below: • Automatize the sensitivity analysis in an isogeometric framework for applications in shape optimization. Applications for linear elasticity are considered. • A methodology is developed for providing a direct link between the CAD model and the analysis mesh. In consequence, the sensitivity analysis can be performed in terms of the design variables located in the design model. • The last objective is to develop an isogeometric method for shape and topological optimization. This method should take advantage of using Non-Uniform Rational B-Splines (NURBS) with higher continuity as basis functions. Isogeometric Analysis (IGA) is a framework designed to integrate the design and analysis in engineering problems. The fundamental idea of IGA is to use the same basis functions for modeling the geometry, usually NURBS, for the approximation of the solution fields. The advantage of integrating design and analysis is two-fold. First, the analysis stage is more accurate since the system of PDEs is not solved using an approximated geometry, but the exact CAD model. Moreover, providing a direct link between the design and analysis discretizations makes possible the implementation of efficient sensitivity analysis methods. Second, the computational time is significantly reduced because the mesh generation process can be avoided. Sensitivity analysis is essential for solving optimization problems when gradient-based optimization algorithms are employed. Automatic differentiation can compute exact gradients, automatically by tracking the algebraic operations performed on the design variables. For the automation of the sensitivity analysis, an isogeometric framework is used. Here, the analysis mesh is obtained after carrying out successive refinements, while retaining the coarse geometry for the domain design. An automatic differentiation (AD) toolbox is used to perform the sensitivity analysis. The AD toolbox takes the code for computing the objective and constraint functions as input. Then, using a source code transformation approach, it outputs a code for computing the objective and constraint functions, and their sensitivities as well. The sensitivities obtained from the sensitivity propagation method are compared with analytical sensitivities, which are computed using a full isogeometric approach. The computational efficiency of AD is comparable to that of analytical sensitivities. However, the memory requirements are larger for AD. Therefore, AD is preferable if the memory requirements are satisfied. Automatic sensitivity analysis demonstrates its practicality since it simplifies the work of engineers and designers. Complex geometries with sharp edges and/or holes cannot easily be described with NURBS. One solution is the use of unstructured meshes. Simplex-elements (triangles and tetrahedra for two and three dimensions respectively) are particularly useful since they can automatically parameterize a wide variety of domains. In this regard, unstructured Bézier elements, commonly used in CAD, can be employed for the exact modelling of CAD boundary representations. In two dimensions, the domain enclosed by NURBS curves is parameterized with Bézier triangles. To describe exactly the boundary of a two-dimensional CAD model, the continuity of a NURBS boundary representation is reduced to C^0. Then, the control points are used to generate a triangulation such that the boundary of the domain is identical to the initial CAD boundary representation. Thus, a direct link between the design and analysis discretizations is provided and the sensitivities can be propagated to the design domain. In three dimensions, the initial CAD boundary representation is given as a collection of NURBS surfaces that enclose a volume. Using a mesh generator (Gmsh), a tetrahedral mesh is obtained. The original surface is reconstructed by modifying the location of the control points of the tetrahedral mesh using Bézier tetrahedral elements and a point inversion algorithm. This method offers the possibility of computing the sensitivity analysis using the analysis mesh. Then, the sensitivities can be propagated into the design discretization. To reuse the mesh originally generated, a moving Bézier tetrahedral mesh approach was implemented. A gradient-based optimization algorithm is employed together with a sensitivity propagation procedure for the shape optimization cases. The proposed shape optimization approaches are used to solve some standard benchmark problems in structural mechanics. The results obtained show that the proposed approach can compute accurate gradients and evolve the geometry towards optimal solutions. In three dimensions, the moving mesh approach results in faster convergence in terms of computational time and avoids remeshing at each optimization step. For considering topological changes in a CAD-based framework, an isogeometric phase-field based shape and topology optimization is developed. In this case, the diffuse interface of a phase-field variable over a design domain implicitly describes the boundaries of the geometry. The design variables are the local values of the phase-field variable. The descent direction to minimize the objective function is found by using the sensitivities of the objective function with respect to the design variables. The evolution of the phase-field is determined by solving the time dependent Allen-Cahn equation. Especially for topology optimization problems that require C^1 continuity, such as for flexoelectric structures, the isogeometric phase field method is of great advantage. NURBS can achieve the desired continuity more efficiently than the traditional employed functions. The robustness of the method is demonstrated when applied to different geometries, boundary conditions, and material configurations. The applications illustrate that compared to piezoelectricity, the electrical performance of flexoelectric microbeams is larger under bending. In contrast, the electrical power for a structure under compression becomes larger with piezoelectricity. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,4 KW - CAD KW - Gestaltoptimierung KW - Topologieoptimierung KW - Isogeometrische Analyse KW - Finite-Elemente-Methode KW - Computer-Aided Design KW - Shape Optimization KW - Topology Optimization KW - Isogeometric Analysis KW - Finite Element Method Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220831-47102 ER - TY - THES A1 - Mojahedin, Arvin T1 - Analysis of Functionally Graded Porous Materials Using Deep Energy Method and Analytical Solution N2 - Porous materials are an emerging branch of engineering materials that are composed of two elements: One element is a solid (matrix), and the other element is either liquid or gas. Pores can be distributed within the solid matrix of porous materials with different shapes and sizes. In addition, porous materials are lightweight, and flexible, and have higher resistance to crack propagation and specific thermal, mechanical, and magnetic properties. These properties are necessary for manufacturing engineering structures such as beams and other engineering structures. These materials are widely used in solid mechanics and are considered a good replacement for classical materials by many researchers recently. Producing lightweight materials has been developed because of the possibility of exploiting the properties of these materials. Various types of porous material are generated naturally or artificially for a specific application such as bones and foams. Like functionally graded materials, pore distribution patterns can be uniform or non-uniform. Biot’s theory is a well-developed theory to study the behavior of poroelastic materials which investigates the interaction between fluid and solid phases of a fluid-saturated porous medium. Functionally graded porous materials (FGPM) are widely used in modern industries, such as aerospace, automotive, and biomechanics. These advanced materials have some specific properties compared to materials with a classic structure. They are extremely light, while they have specific strength in mechanical and high-temperature environments. FGPMs are characterized by a gradual variation of material parameters over the volume. Although these materials can be made naturally, it is possible to design and manufacture them for a specific application. Therefore, many studies have been done to analyze the mechanical and thermal properties of FGPM structures, especially beams. Biot was the pioneer in formulating the linear elasticity and thermoelasticity equations of porous material. Since then, Biot's formulation has been developed in continuum mechanics which is named poroelasticity. There are obstacles to analyzing the behavior of these materials accurately like the shape of the pores, the distribution of pores in the material, and the behavior of the fluid (or gas) that saturated pores. Indeed, most of the engineering structures made of FGPM have nonlinear governing equations. Therefore, it is difficult to study engineering structures by solving these complicated equations. The main purpose of this dissertation is to analyze porous materials in engineering structures. For this purpose, the complex equations of porous materials have been simplified and applied to engineering problems so that the effect of all parameters of porous materials on the behavior of engineering structure has been investigated. The effect of important parameters of porous materials on beam behavior including pores compressibility, porosity distribution, thermal expansion of fluid within pores, the interaction of stresses between pores and material matrix due to temperature increase, effects of pore size, material thickness, and saturated pores with fluid and unsaturated conditions are investigated. Two methods, the deep energy method, and the exact solution have been used to reduce the problem hypotheses, increase accuracy, increase processing speed, and apply these in engineering structures. In both methods, they are analyzed nonlinear and complex equations of porous materials. To increase the accuracy of analysis and study of the effect of shear forces, Timoshenko and Reddy's beam theories have been used. Also, neural networks such as residual and fully connected networks are designed to have high accuracy and less processing time than other computational methods. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,12 KW - Poröser Stoff KW - Analytische Lösung KW - Porous Materials KW - Deep Energy Method KW - Analytical Solution KW - Functionally Graded Materials Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221220-48674 ER - TY - THES A1 - Argañaraz, Cecilia Magdalena T1 - Tiempos imaginados y espacios áridos: controversias en torno al agua en el Valle de Catamarca (siglos XIX-XX) N2 - The thesis addresses journalistic, administrative and judicial historical documentation to analyze the links between aridity and geographical imaginaries in the province of Catamarca (Argentina), from a historical point of view. The research aims to contribute to the understanding of the "non-hegemonic" versions of Modernity, its territoriality and the productions of geographic imaginaries that they involve. To provide a broad purpose, it raises as an object of study the ways in which "modern" practices, actors, links, discourses and expectations about the territory are mobilized when they are located in a space in "other" water conditions. those that are intended to "civilize" it. The general objective of the research is to analyze time-space controversies around water in the city and valley of Catamarca towards 19th and 20th centuries. The specific objectives derived are a) analyzing how various actors are related to waters behavior - in other words, the local water regime – in Catamarca and the meanings built around it. b) to analyze the controversies about the place of Catamarca and its water regime in the local and national geographic imaginary. c) analyze controversies in which the relationships between actors and materialities involved in modernization projects are put into discussion. These concerns by the experience of the actors and by the historical-spatial imagination of the territory, combined, led to the construction of an interdisciplinary methodology based on tools from anthropology, sociology, geography and history. KW - Anthologie KW - Geschichte KW - Umweltforschung KW - Stadtforschung KW - ANTROPOLOGÍA KW - HISTORIA KW - ECOLOGÍA POLÍTICA KW - ESTUDIOS URBANOS KW - HISTORIA AMBIENTAL KW - Anthology KW - History KW - Political ecology KW - urban studies KW - Environmental studies Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220803-46817 ER - TY - THES A1 - Drescher, Marcel T1 - Open Innovation in KMU - Eine empirische Analyse der offenen Innovationsaktivitäten im Kontext der Entrepreneurial Orientation N2 - Open Innovation in kleinen und mittleren Unternehmen (KMU) hat sich stark ausdifferenziert. Dabei zeigt die Empirie, dass KMU unterschiedliche Wege in der offenen Entwicklung von Innovationen begehen. Um die bestehende Literatur zu erweitern, wurden mit dieser Dissertation die Ziele verfolgt 1) offene Innovationsaktivitäten in KMU aus einer Prozessperspektive aufzudecken und genau zu beschreiben und 2) zu erklären, warum sich die Öffnung von Innovationsprozessen in KMU unterscheidet. Dafür wurde auf eine multiple Fallstudienanalyse zurückgegriffen. Untersuchungsobjekte waren kleine etablierte High-Tech Unternehmen aus den neuen Bundesländern. Die Ergebnisse zeigen sechs Prozessmodelle der offenen Innovationsentwicklung, beschrieben als Open Innovation Muster. Deskriptionen dieser Muster unter Berücksichtigung von formenden Innovationsaktivitäten, ausgetauschtem Wissen, beteiligten externen Akteuren und Gründen für und gegen Open Innovation vermitteln ein über den bisherigen Forschungsstand hinausgehendes Verständnis von Open Innovation in KMU. Zudem zeigen die Ergebnisse, dass die Entrepreneurial Orientation erklärt, warum KMU bei der Ausgestaltung von offenen Innovationsprozessen unterschiedlich vorgehen. In der Dissertation wird detailliert dargelegt, welche Open Innovation Muster sich anhand der Entrepreneurial Orientation von KMU (nicht-entrepreneurial bis entrepreneurial) zeigen. Die Ergebnisse liefern sowohl wissenschaftliche Implikationen, als auch Handlungsempfehlungen für die Unternehmenspraxis. KW - Open Innovation KW - Innovationsmanagement KW - Entrepreneurship KW - Klein- und Mittelbetrieb KW - KMU KW - Entrepreneurial Orientation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230314-49463 ER - TY - THES A1 - Riechert, Christin T1 - Hydratation und Eigenschaften von Gips-Zement-Puzzolan-Bindemitteln mit alumosilikatischen Puzzolanen N2 - Reine Calciumsulfatbindemittel weisen eine hohe Löslichkeit auf. Feuchteinwirkung führt zudem zu starken Festigkeitsverlusten. Aus diesem Grund werden diese Bindemittel ausschließlich für Baustoffe und -produkte im Innenbereich ohne permanenten Feuchtebeanspruchung eingesetzt. Eine Möglichkeit, die Feuchtebeständigkeit zu erhöhen, ist die Beimischung puzzolanischer und zementärer Komponenten. Diese Mischsysteme werden Gips-Zement-Puzzolan-Bindemittel (kurz: GZPB) genannt. Mischungen aus Calciumsulfaten und Portlandzementen allein sind aufgrund der treibenden Ettringitbildung nicht raumbeständig. Durch die Zugabe von puzzolanischen Stoffen können aber Bedingungen im hydratisierenden System geschaffen werden, welche eine rissfreie Erhärtung ermöglichen. Hierfür ist eine exakte Rezeptierung der GZPB notwendig, um die GZPB-typischen, ettringitbedingten Dehnungen zeitlich zu begrenzen. Insbesondere bei alumosilikatischen Puzzolanen treten während der Hydratation gegenüber rein silikatischen Puzzolanen deutlich höhere Expansionen auf, wodurch die Gefahr einer potenziellen Rissbildung steigt. Für die Erstellung geeigneter GZPB-Zusammensetzungen bedarf es daher einer Methodik, um raumbeständig erhärtende Systeme sicher von destruktiven Mischungen unterscheiden zu können. Sowohl für die Rezeptierung als auch für die Anwendung der GZPB existieren in Deutschland keinerlei Normen. Darüber hinaus sind die Hydratationsvorgänge sowie die entstehenden Produkte nicht konsistent beschrieben. Auch auf die Besonderheiten der GZPB mit alumosilikatischen Puzzolanen wird in der Literatur nur unzureichend eingegangen. Ziel war es daher, ein grundlegendes Verständnis der Hydratation sowie eine sichere Methodik zur Rezeptierung raumbeständig und rissfrei erhärtender GZPB, insbesondere in Hinblick auf die Verwendung alumosilikatischer Puzzolane, zu erarbeiten. Darüber hinaus sollte systematisch der Einfluss der Einzelkomponenten auf Hydratation und Eigenschaften dieser Bindemittelsysteme untersucht werden. Dies soll ermöglichen, die GZPB für ein breites Anwendungsspektrum als Bindemittel zu etablieren, und somit vorteilhafte Eigenschaften der Calciumsulfate (geringe Schwindneigung, geringe CO2-Emission etc.) mit der Leistungs-fähigkeit von Zementen (Wasserbeständigkeit, Festigkeit, Dauerhaftigkeit etc.) zu verbinden. Als Ausgangsstoffe der Untersuchungen zu den GZPB wurden Stuckgips und Alpha-Halbhydrat als Calciumsulfatbindemittel in unterschiedlichen Anteilen im GZPB verwendet. Die Puzzolan-Zement-Verhältnisse wurden ebenfalls variiert. Als Puzzolan kam für den Großteil der Untersuchungen ein alumosilikatisches Metakaolin zum Einsatz. Als kalkspendende Komponente diente ein reiner Portlandzement. Das Untersuchungsprogramm gliederte sich in 4 Teile. Zuerst wurde anhand von CaO- und pH-Wert-Messungen in Suspensionen sowie dem Längenänderungsverhalten von Bindemittelleimen verschiedener Zusammensetzungen eine Vorauswahl geeigneter GZPB-Rezepturen ermittelt. Danach erfolgten, ebenfalls an Bindemittelleimen, Untersuchungen zu den Eigenschaften der als geeignet eingeschätzten GZPB-Mischungen. Hierzu zählten Langzeitbetrachtungen zur rissfreien Erhärtung bei unterschiedlichen Umgebungsbedingungen sowie die Festigkeitsentwicklung im trockenen und feuchten Zustand. Im nächsten Schritt wurde anhand zweier exemplarischer GZPB-Zusammensetzungen (mit silikatischen und alumosilikatischen Puzzolan) die prinzipiell mögliche Phasenzusammensetzung unter Variation des Puzzolan-Zement-Verhältnisses (P/Z-Verhältnis) und des Calciumsulfatanteils im thermodynamischen Gleichgewichtszustand berechnet. Hier wurde im Besonderen auf Unterschiede der silikatischen und alumosilikatischen Puzzolane eingegangen. Im letzten Teil der Untersuchungen wurden die Hydratationskinetik der GZPB sowie die Gefügeentwicklung näher betrachtet. Hierfür wurden die Porenlösungen chemisch analysiert und Sättigungsindizes berechnet, sowie elektronenmikropische, porosimetrische und röntgenografische Untersuchungen durchgeführt. Abschließend wurden die Ergebnisse gesamtheitlich interpretiert, da die Ergebnisse der einzelnen Untersuchungsprogramme miteinander in Wechselwirkung stehen. Als hauptsächliche Hydratationsprodukte wurden Calciumsulfat-Dihydrat, Ettringit und C-(A)-S-H-Phasen ermittelt, deren Anteile im GZPB neben dem Calciumsulfatanteil und dem Puzzolan-Zement-Verhältnis auch deutlich vom Wasserangebot und der Gefügeentwicklung abhängen. Bei Verwendung von alumosilikatischen Puzzolans kommt es wahrscheinlich zur teilweisen Substitution des Siliciums durch Aluminium in den C-S-H-Phasen. Dies erscheint aufgrund des Nachweises der für diese Phasen typischen, folienartigen Morphologie wahrscheinlich. Portlandit wurde in raumbeständigen GZPB-Systemen nur zu sehr frühen Zeitpunkten in geringen Mengen gefunden. In den Untersuchungen konnte ein Teil der in der Literatur beschriebenen, prinzipiellen Hydratationsabläufe bestätigt werden. Bei Verwendung von Halbhydrat als Calciumsulfatkomponente entsteht zuerst Dihydrat und bildet die Primärstruktur der GZPB. In dieses existierende Grundgefüge kristallisieren dann das Ettringit und die C-(A)-S-H-Phasen. In den GZPB sorgen entgegen der Beschreibungen in der Literatur nicht ausschließlich die C-(A)-S-H-Phasen zur Verbesserung der Feuchtebeständigkeit und der Erhöhung des Festigkeitsniveaus, sondern auch das Ettringit. Beide Phasen überwachsen im zeitlichen Verlauf der Hydratation die Dihydratkristalle in der Matrix und hüllen diese – je nach Calciumsulfatanteil im GZPB – teilweise oder vollständig ein. Diese Umhüllung sowie die starke Gefügeverdichtung durch die C-(A)-S-H-Phasen und das Ettringit bedingen, dass ein lösender Angriff durch Wasser erschwert oder gar verhindert wird. Gleichzeitig wird die Gleitfähigkeit an den Kontaktstellen der Dihydratkristalle verringert. Eine rissfreie und raumbeständige Erhärtung ist für die gefahrlose Anwendung eines GZPB-Systems essentiell. Hierfür ist die Kinetik der Ettringitbildung von elementarer Bedeutung. Die gebildete Ettringitmenge spielt nur eine untergeordnete Rolle. Selbst ausgeprägte, ettringitbedingte Dehnungen und hohe sich bildende Mengen führen zu frühen Zeitpunkten, wenn die Dihydratkristalle noch leicht gegeneinander verschiebbar sind, zu keinen Schäden. Bleibt die Übersättigung bezüglich Ettringit und somit auch der Kristallisationsdruck allerdings über einen langen Zeitraum hoch, genügen bereits geringe Ettringitmengen, um das sich stetig verfestigende Gefüge stark zu schädigen. Die für die raumbeständige Erhärtung der GZPB notwendige, schnelle Abnahme der Ettringitübersättigung wird hauptsächlich durch die Reaktivität des Puzzolans beeinflusst. Die puzzolanische Reaktion führt zur Bindung des aus dem Zement stammenden Calciumhydroxid durch die Bildung von C-(A)-S-H-Phasen und Ettringit. Hierdurch sinkt die Calcium- und Hydroxidionenkonzentration in der Porenlösung im Verlauf der Hydratation, wodurch auch die Übersättigung bezüglich Ettringit abnimmt. Je höher die Reaktivität des Puzzolans ist, desto schneller sinkt der Sättigungsindex des Ettringits und somit auch der Kristallisationsdruck. Nach Unterschreiten eines noch näher zu klärendem Grenzwert der Übersättigung stagnieren die Dehnungen. Das Ettringit kristallisiert bzw. wächst nun bevorzugt in den Poren ohne eine weitere, äußere Volumenzunahme zu verursachen. Um eine schadensfreie Erhärtung des GZPB zu gewährleisten, muss gerade in der frühen Phase der Hydratation ein ausreichendes Wasserangebot gewährleistet werden, so dass die Ettringitbildung möglichst vollständig ablaufen kann. Andernfalls kann es bei einer Wiederbefeuchtung zur Reaktivierung der Ettringitbildung kommen, was im eingebauten Zustand Schäden verursachen kann. Die Gewährleistung eines ausreichenden Wasserangebots ist im GZPB-System nicht unproblematisch. In Abhängigkeit der GZPB-Zusammensetzung können sich große Ettringitmengen bilden, die einen sehr hohen Wasserbedarf aufweisen. Deshalb kann es, je nach verwendeten Wasser-Bindemittel-Wert, im Bindemittelleim zu einem Wassermangel kommen, welcher die weitere Hydratation verlangsamt bzw. komplett verhindert. Zudem können GZPB-Systeme teils sehr dichte Gefüge ausbilden, wodurch der Wassertransport zum Reaktionsort des Ettringits zusätzlich behindert wird. Die Konzeption raumbeständiger GZPB-Systeme muss anhand mehrerer aufeinander aufbauender Untersuchungen erfolgen. Zur Vorauswahl geeigneter Puzzolan-Zementverhältnisse eignen sich die Messungen der CaO-Konzentration und des pH-Wertes in Suspensionen. Als alleinige Beurteilungsgrundlage reicht dies allerdings nicht aus. Zusätzlich muss das Längenänderungs-verhalten beurteilt werden. Raumbeständige Mischungen mit alumosilikatischen Puzzolanen zeigen zu frühen Zeitpunkten starke Dehnungen, welche dann abrupt stagnieren. Stetige – auch geringe – Dehnungen weisen auf eine destruktive Zusammensetzung hin. Mit diesem mehrstufigen Vorgehen können raumbeständige, stabile GZPB-Systeme konzipiert werden, so dass die Zielstellung der Arbeit erreicht wurde und ein sicherer praktischer Einsatz dieser Bindemittelart gewährleistet werden kann.   KW - Gips KW - Zement KW - Hydratation KW - Gips-Zement-Puzzolan-Bindemittel KW - Hydratation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220825-47076 SN - 978-3-00-073003-0 ER - TY - THES A1 - Malik, Irfan T1 - An adaptive contact formulation for Isogeometric Finite Element Analysis N2 - Numerical simulation of physical phenomena, like electro-magnetics, structural and fluid mechanics is essential for the cost- and time-efficient development of mechanical products at high quality. It allows to investigate the behavior of a product or a system far before the first prototype of a product is manufactured. This thesis addresses the simulation of contact mechanics. Mechanical contacts appear in nearly every product of mechanical engineering. Gearboxes, roller bearings, valves and pumps are only some examples. Simulating these systems not only for the maximal/minimal stresses and strains but for the stress-distribution in case of tribo-contacts is a challenging task from a numerical point of view. Classical procedures like the Finite Element Method suffer from the nonsmooth representation of contact surfaces with discrete Lagrange elements. On the one hand, an error due to the approximate description of the surface is introduced. On the other hand it is difficult to attain a robust contact search because surface normals can not be described in a unique form at element edges. This thesis introduces therefore a novel approach, the adaptive isogeometric contact formulation based on polynomial Splines over hierarchical T-meshes (PHT-Splines), for the approximate solution of the non-linear contact problem. It provides a more accurate, robust and efficient solution compared to conventional methods. During the development of this method the focus was laid on the solution of static contact problems without friction in 2D and 3D in which the structures undergo small deformations. The mathematical description of the problem entails a system of partial differential equations and boundary conditions which model the linear elastic behaviour of continua. Additionally, it comprises side conditions, the Karush-Kuhn-Tuckerconditions, to prevent the contacting structures from non-physical penetration. The mathematical model must be transformed into its integral form for approximation of the solution. Employing a penalty method, contact constraints are incorporated by adding the resulting equations in weak form to the overall set of equations. For an efficient space discretization of the bulk and especially the contact boundary of the structures, the principle of Isogeometric Analysis (IGA) is applied. Isogeometric Finite Element Methods provide several advantages over conventional Finite Element discretization. Surface approximation with Non-Uniform Rational B-Splines (NURBS) allow a robust numerical solution of the contact problem with high accuracy in terms of an exact geometry description including the surface smoothness. The numerical evaluation of the contact integral is challenging due to generally non-conforming meshes of the contacting structures. In this work the highly accurate Mortar Method is applied in the isogeometric setting for the evaluation of contact contributions. This leads to an algebraic system of equations that is linearized and solved in sequential steps. This procedure is known as the Newton Raphson Method. Based on numerical examples, the advantages of the isogeometric approach with classical refinement strategies, like the p- and h-refinement, are shown and the influence of relevant algorithmic parameters on the approximate solution of the contact problem is verified. One drawback of the Spline approximations of stresses though is that they lack accuracy at the contact edge where the structures change their boundary from contact to no contact and where the solution features a kink. The approximation with smooth Spline functions yields numerical artefacts in the form of non-physical oscillations. This property of the numerical solution is not only a drawback for the simulation of e.g. tribological contacts, it also influences the convergence properties of iterative solution procedures negatively. Hence, the NURBS discretized geometries are transformed to Polynomial Splines over Hierarchical T-meshes (PHT-Splines), for the local refinement along contact edges to reduce the artefact of pressure oscillations. NURBS have a tensor product structure which does not allow to refine only certain parts of the geometrical domain while leaving other parts unchanged. Due to the Bézier Extraction, lying behind the transformation from NURBS to PHT-Splines, the connected mesh structure is broken up into separate elements. This allows an efficient local refinement along the contact edge. Before single elements are refined in a hierarchical form with cross-insertion, existing basis functions must be modified or eliminated. This process of truncation assures local and global linear independence of the refined basis which is needed for a unique approximate solution. The contact boundary is a priori unknown. Local refinement along the contact edge, especially for 3D problems, is for this reason not straight forward. In this work the use of an a posteriori error estimation procedure, the Super Convergent Recovery Solution Based Error Estimation Scheme, together with the Dörfler Marking Method is suggested for the spatial search of the contact edge. Numerical examples show that the developed method improves the quality of solutions along the contact edge significantly compared to NURBS based approximate solutions. Also, the error in maximum contact pressures, which correlates with the pressure artefacts, is minimized by the adaptive local refinement. In a final step the practicability of the developed solution algorithm is verified by an industrial application: The highly loaded mechanical contact between roller and cam in the drive train of a high-pressure fuel pump is considered. KW - Isogeometrische Analyse KW - Elementanalyse KW - Isogeometric Analysis KW - Error estimation KW - adaptive contact KW - Finite Element Analysis KW - Computational contact mechanics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220324-46129 ER - TY - THES A1 - Shaaban Mohamed, Ahmed Mostafa T1 - Isogeometric boundary element analysis and structural shape optimization for Helmholtz acoustic problems N2 - In this thesis, a new approach is developed for applications of shape optimization on the time harmonic wave propagation (Helmholtz equation) for acoustic problems. This approach is introduced for different dimensional problems: 2D, 3D axi-symmetric and fully 3D problems. The boundary element method (BEM) is coupled with the isogeometric analysis (IGA) forming the so-called (IGABEM) which speeds up meshing and gives higher accuracy in comparison with standard BEM. BEM is superior for handling unbounded domains by modeling only the inner boundaries and avoiding the truncation error, present in the finite element method (FEM) since BEM solutions satisfy the Sommerfeld radiation condition automatically. Moreover, BEM reduces the space dimension by one from a volumetric three-dimensional problem to a surface two-dimensional problem, or from a surface two-dimensional problem to a perimeter one-dimensional problem. Non-uniform rational B-splines basis functions (NURBS) are used in an isogeometric setting to describe both the CAD geometries and the physical fields. IGABEM is coupled with one of the gradient-free optimization methods, the Particle Swarm Optimization (PSO) for structural shape optimization problems. PSO is a straightforward method since it does not require any sensitivity analysis but it has some trade-offs with regard to the computational cost. Coupling IGA with optimization problems enables the NURBS basis functions to represent the three models: shape design, analysis and optimization models, by a definition of a set of control points to be the control variables and the optimization parameters as well which enables an easy transition between the three models. Acoustic shape optimization for various frequencies in different mediums is performed with PSO and the results are compared with the benchmark solutions from the literature for different dimensional problems proving the efficiency of the proposed approach with the following remarks: - In 2D problems, two BEM methods are used: the conventional isogeometric boundary element method (IGABEM) and the eXtended IGABEM (XIBEM) enriched with the partition-of-unity expansion using a set of plane waves, where the results are generally in good agreement with the linterature with some computation advantage to XIBEM which allows coarser meshes. -In 3D axi-symmetric problems, the three-dimensional problem is simplified in BEM from a surface integral to a combination of two 1D integrals. The first is the line integral similar to a two-dimensional BEM problem. The second integral is performed over the angle of revolution. The discretization is applied only to the former integration. This leads to significant computational savings and, consequently, better treatment for higher frequencies over the full three-dimensional models. - In fully 3D problems, a detailed comparison between two BEM methods: the conventional boundary integral equation (CBIE) and Burton-Miller (BM) is provided including the computational cost. The proposed models are enhanced with a modified collocation scheme with offsets to Greville abscissae to avoid placing collocation points at the corners. Placing collocation points on smooth surface enables accurate evaluation of normals for BM formulation in addition to straightforward prediction of jump-terms and avoids singularities in $\mathcal{O} (1/r)$ integrals eliminating the need for polar integration. Furthermore, no additional special treatment is required for the hyper-singular integral while collocating on highly distorted elements, such as those containing sphere poles. The obtained results indicate that, CBIE with PSO is a feasible alternative (except for a small number of fictitious frequencies) which is easier to implement. Furthermore, BM presents an outstanding treatment of the complicated geometry of mufflers with internal extended inlet/outlet tube as an interior 3D Helmholtz acoustic problem instead of using mixed or dual BEM. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,6 KW - Randelemente-Methode KW - Isogeometrische Analyse KW - Gestaltoptimierung KW - Boundary Element Method KW - Isogeometric Analysis KW - Helmholtz Acoustic Problems KW - Shape Optimization Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220816-47030 ER - TY - THES A1 - Cicek, Burhan T1 - Revisiting vernacular technique: Engineering a low environmental impact earth stabilisation method N2 - The major drawbacks of earth as a construction material — such as its low water stability and moderate strength — have led mankind to stabilize earth. Different civilizations developed vernacular techniques mainly focussing on lime, pozzolan or gypsum stabilization. Recently, cement has become the most commonly used additive in earth stabilization as it improves the strength and durability of plain earth. Also, it is a familiar and globally available construction material. However, using cement as an additive reduces the environmental advantages of earth and run counter to global targets regarding the reduction of CO2 emissions. Alternatives to cement stabilization are currently neither efficient enough to reduce its environmental impact nor allow the possibility of obtaining better results than those of cement. As such, this thesis deals with the rediscovery of a reverse engineering approach for a low environmental impact earth stabilization technique, aiming to replace cement in earth stabilization. The first step in the method consists in a comprehensive review of earth stabilization with regards to earthen building standards and soil classification, which allows us to identify the research gap. The review showed that there is great potential in using other additives which result in similar improvements as those achieved by cement. However, the studies that have been conducted so far either use expansive soils, which are not suitable for earth constructions or artificial pozzolans that indirectly contribute to CO2 emissions. This is the main research gap. The key concept for the development in the second step of the method is to combine vernacular additives to both improve the strength and durability of plain earth and to reduce the CO2 emissions. Various earth-mixtures were prepared and both development and performance tests were done to investigate the performance of this technique. The laboratory analyses on mix-design have proven a high durability and the results show a remarkable increase in strength performance. Furthermore, a significant reduction in CO2 emissions in comparison to cement stabilization could be shown. The third step of the method discusses the results drawn from the experimental programme. In addition, the potential of the new earth mixture with regards to its usability in the field of building construction and architectural design is further elaborated on. The method used in this study is the first of its kind that allows investors to avoid the very time-consuming processes such as finding a suitable source for soil excavation and soil classification. The developed mixture has significant workability and suitability for production of stabilized earthen panels — the very first of its kind. Such a panel is practically feasible, reasonable, and could be integrated into earthen building standards in general and in particular to DIN 18948, which is related to earthen boards and published in 2018. KW - Lehm KW - Stabilisierung KW - Lehmbau KW - Kalk KW - Gips Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220803-46989 ER - TY - THES A1 - Damir, Mirhan T1 - Recalling the Omitted: Exploring the Spatial Development of the Modern Industrial Legacies in Egypt. The Case of Alexandria. N2 - The modern industries of the 19th and 20th centuries had multiple effects on the spatial transformation of cities and regions. The past decade has witnessed increasing scholarly and governmental attempts toward conserving modern industrial heritage in the so-called Global North, with the goal, among others, of leveraging this heritage as a driver for urban economic development. In Egypt, the process continues to lag behind; on the one hand, this is due to the perplexing official recognition of the (in)tangible witnesses of modern industries. On the other hand, the official recognition and previous publications focus predominantly on weighing the significance of industrial structures based on their monumental architectural aesthetics. Their historical urban role and spatial attributes as part of urban heritage have yet to be seriously acknowledged. Accordingly, this hinders the integration of the extant industrial sites into the broader debate surrounding urban conservation, leaving them vulnerable to decay and destruction. This dissertation steers away from the singular investigation of selective modern industrial sites to recall their historical spatial development on a city scale. This is effected by investigating a case study - the Egyptian port city of Alexandria. With the limited secondary data available on modern industries in Alexandria, this dissertation relied predominantly on primary sources. The author collected and leveraged both quantitative and qualitative data to recontextualize modern industries in terms of their spatial dynamics, order, and rationale within cities’ transformation. By recalling historical spatial development in Alexandria, the contribution of this dissertation lies in highlighting what the author refers to as the Omitted Heritage. This is defined by the modern industries in Egypt that are intentionally, unintentionally, and forgetfully excluded in terms of physical documentation, evaluation, appreciation, and integration within urban development plans. The method used excavated the richness of the established modern industries in Alexandria in terms of their quantity and diversity, which would have otherwise remained largely forgotten. The contextualization of modern industries unveiled spatial periodization, spatial dynamics, and conceptual development. The study draws on important analytical aspects that transcend the sites’ boundaries, elevating their significance to the municipal, regional, national, and even global levels. Its recommendations for further research are also divided into those levels. N2 - Die modernen Industrien des 19. und 20. Jahrhunderts wirkten sich vielfältiger Weise auf die räumliche Transformation von Städten und Regionen aus. Im letzten Jahrzehnt gab es vermehrt wissenschaftliche und staatliche Bestrebungen, das moderne industrielle Erbe im sogenannten Globalen Norden zu bewahren, unter anderem im Hinblick auf seine Einbindung als wirtschaftlicher Treiber der Stadtentwicklung. Im direkten Vergleich weist Ägypten hier immer noch einen Rückstand auf. Dies bezieht sich einerseits auf die noch ausstehende Dokumentation der historischen Industrien sowie eine offizielle, institutionelle Anerkennung der industriellen Hinterlassenschaften. Zum anderen beschränken sich die offizielle Anerkennung sowie bisherige Publikationen überwiegend auf die Begründung der Bedeutung von Industriebauten entlang ihrer architektonischen Qualität. Die Berücksichtigung ihrer stadtgeschichtlichen Rolle und ihrer räumlichen Zusammenhänge als Teil des städtischen Erbes ist noch unerforscht. Dementsprechend erschwert dies die Einbindung der noch vorhandenen historischen Industrieanlagen in die allgemeine Debatte der Stadtentwicklung und setzt sie damit einer steigenden Gefahr von Verfall und Zerstörung aus. Diese Dissertation widmet sich der historischen räumlichen Entwicklung der modernen Industrien auf gesamtstädtischer Ebene und untersucht dies am Fallbeispiel der ägyptischen Hafenstadt Alexandria. Angesichts bisher kaum zur Verfügung stehender Sekundärliteratur über moderne Industrien in Ägypten stellen Primärquellen die wesentliche Datengrundlage der Arbeit dar. Sowohl die gesammelten quantitativen als auch die qualitativen Daten werden zur Rekontextualisierung der modernen Industrien in Bezug auf die Dynamik, Ordnung und Zweck ihrer räumlichen Strukturen innerhalb der urbanen Transformation herangezogen. In dieser Arbeit werden die modernen Industrien als „ausgelassenes Erbe (Omitted Heritage)“ bezeichnet, weil sie in Bezug auf ihre räumliche Dokumentation, Auswertung, und Integration in Stadtentwicklungsplänen absichtlich und unabsichtlich keine Berücksichtigung finden. Der Beitrag dieser Dissertation liegt daher in der Erschließung und Kategorisierung der verschiedenen modernen Industrien in Alexandria, indem ihre räumliche Verortung und Verteilung durch eine Kartierung der verfügbaren Daten sichtbar und ablesbar gemacht wurde. Daraus wird die Entwicklung der historischen räumlichen Entwicklung der Industrien lesbar. Die angewandte Methode zeigt die Vielfältigkeit der etablierten modernen Industrien in Alexandria in Form quantifizierter Zahlen und diversifizierter Typen auf. Durch die Kontextualisierung der modernen Industrien erschließt sich deren räumliche Periodisierung, räumliche Dynamik und ihre konzeptionelle Entwicklung. Diese Arbeit stützt sich auf wichtige analytische Aspekte, die über die Grenzen des einzelnen industriellen Grundstücks hinausgehen und seine Bedeutung auf städtischer, regionaler, nationaler und sogar internationaler Ebene hervorheben. Die Empfehlungen und Vorschläge für die weitere Forschung beziehen sich ebenfalls auf diese Maßstabsebenen. N2 - كان للصناعات الحديثة في القرنين التاسع عشر والعشرين تأثيرات متعددة على التطور العُمراني للمدن. شَهدت الدول الغربية بالعقد الماضي دراسات علمية مُتعددة ومجهودات حكومية متزايدة نحو الحفاظ على التراث الصناعي الحديث، بهدف توظيف هذا التراث كمحرك للتنمية الاقتصادية الحضرية. علي صعيد آخر، مازالت دولة مصر تواجه صعوبات لتخطو أولي الخطوات للحفاظ على التراث الصناعي بها. يرجع ذلك أولاً إلى الانقسام الرسمي لهذه الصناعات التابعة لحقبة تاريخية واحدة بين التعيين المصطلحي والمؤسسي كتراث أو آثار. ثانياً، ترتكز دلالات التقييم سواء من مؤسسات الدولة المصرية أو الدراسات العلمية في الغالب على القيمة المعمارية والجمالية للمباني الصناعية الكبيرة. وفي ضوء ذلك، لا يوجد توثيق علمي شامل للصناعات الي تم انشاؤها في مصر بين القرنين التاسع عشر والعشرين وكذلك الخصائص الحضارية لهذه الصناعات ودورها الشامل في تاريخ التطور العمراني للمدن كجزء من التراث العمراني. وعليه، فإن هذا يعوق دمج المواقع الصناعية القائمة في إطار النقاش المحلي والدولي حول الحفاظ على هذه الصناعات كمناطق حضرية وجزء لا يتجزأ من هوية المدينة. تهدف هذه الدراسة إلى الكشف عن الدور الحضري الشامل للصناعات التاريخية التي أسهمت في تطور العمراني على نطاق المدينة. يتم ذلك من خلال دراسة حالة مدينة الإسكندرية الساحلية. اعتمدت هذه الدراسة على المصادر الأولية بدرجة كبيرة نظراً لمحدودية المصادر الثانوية المتاحة عن تطور الصناعات الحديثة في الإسكندرية. قامت الدارسة بتشكيل قائمة للبيانات الكمية والنوعية للصناعات التي تم انشاؤها في الإسكندرية في القرنين التاسع عشر، بهدف إعادة صياغة سياق الصناعات الحديثة مستعينة بمنهجية الديناميكيات المكانية - “spatial dynamics” - من حيث التنظيم المكاني وعرض المنطق وراء توقيع وتطور الصناعات على مدار تاريخ المدينة. تكمن مساهمة هذه الدراسة في إبراز ما يشير إليه المؤلف بالموروثات المهملة – “Omitted Legacies” - من خلال تذكر تاريخ التطور المكاني للصناعات في الإسكندرية. يتم تعريف ذلك من خلال الصناعات الحديثة في مصر التي يتم اهمالها واستبعادها سواء عن قصد أو عن غير قصد من حيث توثيقها المادي وتقييمها وإدراجها ضمن خطط التنمية الحضرية. أسهمت المنهجية المُستخدمة في التنقيب عن ثراء الصناعات الحديثة القائمة في الإسكندرية، من حيث الكم والتنوع، والتي لولا ذلك كانت ستزال في طي النسيان. كشفت الدراسة على جوانب تحليلية مهمة خارج الإطار المُحدد لتقييم الصناعات التاريخية على الجانب المعماري فقط وكذلك جوانب تحليلية تتجاوز حدود المواقع، وترتقي من أهميته هذه الصناعات على المستويات المحلية والإقليمية والوطنية وحتى العالمية. تشمل توصيات هذه الدراسة استعراض الموروثات الصناعية المهملة في مصر وإعادة عرضها للتقييم علي المستويات المحلية والإقليمية والوطنية وحتى العالمية. KW - Ägypten KW - Technisches Denkmal KW - Stadtgeschichte KW - Denkmalpflege KW - Dokumentation KW - modern industries KW - Alexandria KW - urban history KW - historical spatial analysis KW - documentation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220329-46196 ER - TY - THES A1 - Zhang, Yongzheng T1 - A Nonlocal Operator Method for Quasi-static and Dynamic Fracture Modeling N2 - Material failure can be tackled by so-called nonlocal models, which introduce an intrinsic length scale into the formulation and, in the case of material failure, restore the well-posedness of the underlying boundary value problem or initial boundary value problem. Among nonlocal models, peridynamics (PD) has attracted a lot of attention as it allows the natural transition from continuum to discontinue and thus allows modeling of discrete cracks without the need to describe and track the crack topology, which has been a major obstacle in traditional discrete crack approaches. This is achieved by replacing the divergence of the Cauchy stress tensor through an integral over so-called bond forces, which account for the interaction of particles. A quasi-continuum approach is then used to calibrate the material parameters of the bond forces, i.e., equating the PD energy with the energy of a continuum. One major issue for the application of PD to general complex problems is that they are limited to fairly simple material behavior and pure mechanical problems based on explicit time integration. PD has been extended to other applications but losing simultaneously its simplicity and ease in modeling material failure. Furthermore, conventional PD suffers from instability and hourglass modes that require stabilization. It also requires the use of constant horizon sizes, which drastically reduces its computational efficiency. The latter issue was resolved by the so-called dual-horizon peridynamics (DH-PD) formulation and the introduction of the duality of horizons. Within the nonlocal operator method (NOM), the concept of nonlocality is further extended and can be considered a generalization of DH-PD. Combined with the energy functionals of various physical models, the nonlocal forms based on the dual-support concept can be derived. In addition, the variation of the energy functional allows implicit formulations of the nonlocal theory. While traditional integral equations are formulated in an integral domain, the dual-support approaches are based on dual integral domains. One prominent feature of NOM is its compatibility with variational and weighted residual methods. The NOM yields a direct numerical implementation based on the weighted residual method for many physical problems without the need for shape functions. Only the definition of the energy or boundary value problem is needed to drastically facilitate the implementation. The nonlocal operator plays an equivalent role to the derivatives of the shape functions in meshless methods and finite element methods (FEM). Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease by a series of matrix multiplications. In addition, NOM can be used to derive many nonlocal models in strong form. The principal contributions of this dissertation are the implementation and application of NOM, and also the development of approaches for dealing with fractures within the NOM, mostly for dynamic fractures. The primary coverage and results of the dissertation are as follows: -The first/higher-order implicit NOM and explicit NOM, including a detailed description of the implementation, are presented. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combining with the method of weighted residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. For the sake of conciseness, the implementation in this chapter is focused on linear elastic solids only, though the NOM can handle more complex nonlinear problems. An explicit nonlocal operator method for the dynamic analysis of elasticity solid problems is also presented. The explicit NOM avoids the calculation of the tangent stiffness matrix as in the implicit NOM model. The explicit scheme comprises the Verlet-velocity algorithm. The NOM can be very flexible and efficient for solving partial differential equations (PDEs). It's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Several numerical examples are presented to show the capabilities of this method. -A nonlocal operator method for the dynamic analysis of (thin) Kirchhoff plates is proposed. The nonlocal Hessian operator is derived from a second-order Taylor series expansion. NOM is higher-order continuous, which is exploited for thin plate analysis that requires $C^1$ continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation. -A nonlocal fracture modeling is developed and applied to the simulation of quasi-static and dynamic fractures using the NOM. The phase field's nonlocal weak and associated strong forms are derived from a variational principle. The NOM requires only the definition of energy. We present both a nonlocal implicit phase field model and a nonlocal explicit phase field model for fracture; the first approach is better suited for quasi-static fracture problems, while the key application of the latter one is dynamic fracture. To demonstrate the performance of the underlying approach, several benchmark examples for quasi-static and dynamic fracture are solved. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,9 KW - Variationsprinzip KW - Partial Differential Equations KW - Taylor Series Expansion KW - Peridynamics KW - Variational principle KW - Phase field method KW - Peridynamik KW - Phasenfeldmodell KW - Partielle Differentialgleichung KW - Nichtlokale Operatormethode Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221026-47321 ER - TY - THES A1 - Nouri, Hamidreza T1 - Mechanical Behavior of two dimensional sheets and polymer compounds based on molecular dynamics and continuum mechanics approach N2 - Compactly, this thesis encompasses two major parts to examine mechanical responses of polymer compounds and two dimensional materials: 1- Molecular dynamics approach is investigated to study transverse impact behavior of polymers, polymer compounds and two dimensional materials. 2- Large deflection of circular and rectangular membranes is examined by employing continuum mechanics approach. Two dimensional materials (2D), including, Graphene and molybdenum disulfide (MoS2), exhibited new and promising physical and chemical properties, opening new opportunities to be utilized alone or to enhance the performance of conventional materials. These 2D materials have attracted tremendous attention owing to their outstanding physical properties, especially concerning transverse impact loading. Polymers, with the backbone of carbon (organic polymers) or do not include carbon atoms in the backbone (inorganic polymers) like polydimethylsiloxane (PDMS), have extraordinary characteristics particularly their flexibility leads to various easy ways of forming and casting. These simple shape processing label polymers as an excellent material often used as a matrix in composites (polymer compounds). In this PhD work, Classical Molecular Dynamics (MD) is implemented to calculate transverse impact loading of 2D materials as well as polymer compounds reinforced with graphene sheets. In particular, MD was adopted to investigate perforation of the target and impact resistance force . By employing MD approach, the minimum velocity of the projectile that could create perforation and passes through the target is obtained. The largest investigation was focused on how graphene could enhance the impact properties of the compound. Also the purpose of this work was to discover the effect of the atomic arrangement of 2D materials on the impact problem. To this aim, the impact properties of two different 2D materials, graphene and MoS2, are studied. The simulation of chemical functionalization was carried out systematically, either with covalently bonded molecules or with non-bonded ones, focusing the following efforts on the covalently bounded species, revealed as the most efficient linkers. To study transverse impact behavior by using classical MD approach , Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) software, that is well-known among most researchers, is employed. The simulation is done through predefined commands in LAMMPS. Generally these commands (atom style, pair style, angle style, dihedral style, improper style, kspace style, read data, fix, run, compute and so on) are used to simulate and run the model for the desired outputs. Depends on the particles and model types, suitable inter-atomic potentials (force fields) are considered. The ensembles, constraints and boundary conditions are applied depends upon the problem definition. To do so, atomic creation is needed. Python codes are developed to generate particles which explain atomic arrangement of each model. Each atomic arrangement introduced separately to LAMMPS for simulation. After applying constraints and boundary conditions, LAMMPS also include integrators like velocity-Verlet integrator or Brownian dynamics or other types of integrator to run the simulation and finally the outputs are emerged. The outputs are inspected carefully to appreciate the natural behavior of the problem. Appreciation of natural properties of the materials assist us to design new applicable materials. In investigation on the large deflection of circular and rectangular membranes, which is related to the second part of this thesis, continuum mechanics approach is implemented. Nonlinear Föppl membrane theory, which carefully release nonlinear governing equations of motion, is considered to establish the non-linear partial differential equilibrium equations of the membranes under distributed and centric point loads. The Galerkin and energy methods are utilized to solve non-linear partial differential equilibrium equations of circular and rectangular plates respectively. Maximum deflection as well as stress through the film region, which are kinds of issue in many industrial applications, are obtained. T2 - Mechanisches Verhalten von zweidimensionalen Schichten und Polymerverbindungen basierend auf molekulardynamischer und kontinuumsmechanischem Ansatz KW - Molekulardynamik KW - Polymerverbindung KW - Auswirkung KW - Molecular Dynamics Simulation KW - Continuum Mechnics KW - Polymer compound KW - Impact Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220713-46700 ER - TY - THES A1 - Jenabidehkordi, Ali T1 - An Efficient Adaptive PD Formulation for Complex Microstructures N2 - The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridy- namic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dy- namic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena. This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature. New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three dis- tinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions. KW - Peridynamik KW - Numerical Simulations KW - Peridynamics KW - Numerical Simulations Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221124-47422 ER - TY - THES A1 - Hanna, John T1 - Computational Fracture Modeling and Design of Encapsulation-Based Self-Healing Concrete Using XFEM and Cohesive Surface Technique N2 - Encapsulation-based self-healing concrete (SHC) is the most promising technique for providing a self-healing mechanism to concrete. This is due to its capacity to heal fractures effectively without human interventions, extending the operational life and lowering maintenance costs. The healing mechanism is created by embedding capsules containing the healing agent inside the concrete. The healing agent will be released once the capsules are fractured and the healing occurs in the vicinity of the damaged part. The healing efficiency of the SHC is still not clear and depends on several factors; in the case of microcapsules SHC the fracture of microcapsules is the most important aspect to release the healing agents and hence heal the cracks. This study contributes to verifying the healing efficiency of SHC and the fracture mechanism of the microcapsules. Extended finite element method (XFEM) is a flexible, and powerful discrete crack method that allows crack propagation without the requirement for re-meshing and has been shown high accuracy for modeling fracture in concrete. In this thesis, a computational fracture modeling approach of Encapsulation-based SHC is proposed based on the XFEM and cohesive surface technique (CS) to study the healing efficiency and the potential of fracture and debonding of the microcapsules or the solidified healing agents from the concrete matrix as well. The concrete matrix and a microcapsule shell both are modeled by the XFEM and combined together by CS. The effects of the healed-crack length, the interfacial fracture properties, and microcapsule size on the load carrying capability and fracture pattern of the SHC have been studied. The obtained results are compared to those obtained from the zero thickness cohesive element approach to demonstrate the significant accuracy and the validity of the proposed simulation. The present fracture simulation is developed to study the influence of the capsular clustering on the fracture mechanism by varying the contact surface area of the CS between the microcapsule shell and the concrete matrix. The proposed fracture simulation is expanded to 3D simulations to validate the 2D computational simulations and to estimate the accuracy difference ratio between 2D and 3D simulations. In addition, a proposed design method is developed to design the size of the microcapsules consideration of a sufficient volume of healing agent to heal the expected crack width. This method is based on the configuration of the unit cell (UC), Representative Volume Element (RVE), Periodic Boundary Conditions (PBC), and associated them to the volume fraction (Vf) and the crack width as variables. The proposed microcapsule design is verified through computational fracture simulations. KW - Beton KW - Bruchverhalten KW - Finite-Elemente-Methode KW - Self-healing concrete KW - Computational fracture modeling KW - Capsular clustering; Design of microcapsules KW - XFEM KW - Cohesive surface technique KW - Mikrokapsel KW - Selbstheilendem Beton KW - Computermodellierung des Bruchverhaltens KW - Entwurf von Mikrokapseln KW - Kapselclustern KW - Erweiterte Finite-Elemente-Methode KW - Kohäsionsflächenverfahren Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221124-47467 ER - TY - THES A1 - Carvajal Bermúdez, Juan Carlos T1 - New methods of citizen participation based on digital technologies N2 - The current thesis presents research about new methods of citizen participation based on digital technologies. The focus on the research lies on decentralized methods of participation where citizens take the role of co-creators. The research project first conducted a review of the literature on citizen participation, its origins and the different paradigms that have emerged over the years. The literature review also looked at the influence of technologies on participation processes and the theoretical frameworks that have emerged to understand the introduction of technologies in the context of urban development. The literature review generated the conceptual basis for the further development of the thesis. The research begins with a survey of technology enabled participation applications that examined the roles and structures emerging due to the introduction of technology. The results showed that cities use technology mostly to control and monitor urban infrastructure and are rather reluctant to give citizens the role of co-creators. Based on these findings, three case studies were developed. Digital tools for citizen participation were conceived and introduced for each case study. The adoption and reaction of the citizens were observed using three data collection methods. The results of the case studies showed consistently that previous participation and engagement with informal citizen participation are a determinining factor in the potential adoption of digital tools for decentralized engagement. Based on these results, the case studies proposed methods and frameworks that can be used for the conception and introduction of technologies for decentralized citizen participation. KW - Partizipation KW - Beteiligung KW - Technologie KW - Citizen participation KW - Digital technologies Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220906-47124 ER - TY - THES A1 - Vogler, Verena T1 - A framework for artificial coral reef design: Integrating computational modelling and high precision monitoring strategies for artificial coral reefs – an Ecosystem-aware design approach in times of climate change N2 - Tropical coral reefs, one of the world’s oldest ecosystems which support some of the highest levels of biodiversity on the planet, are currently facing an unprecedented ecological crisis during this massive human-activity-induced period of extinction. Hence, tropical reefs symbolically stand for the destructive effects of human activities on nature [4], [5]. Artificial reefs are excellent examples of how architectural design can be combined with ecosystem regeneration [6], [7], [8]. However, to work at the interface between the artificial and the complex and temporal nature of natural systems presents a challenge, i.a. in respect to the B-rep modelling legacy of computational modelling. The presented doctorate investigates strategies on how to apply digital practice to realise what is an essential bulwark to retain reefs in impossibly challenging times. Beyond the main question of integrating computational modelling and high precision monitoring strategies in artificial coral reef design, this doctorate explores techniques, methods, and linking frameworks to support future research and practice in ecology led design contexts. Considering the many existing approaches for artificial coral reefs design, one finds they often fall short in precisely understanding the relationships between architectural and ecological aspects (e.g. how a surface design and material composition can foster coral larvae settlement, or structural three-dimensionality enhance biodiversity) and lack an integrated underwater (UW) monitoring process. Such a process is necessary in order to gather knowledge about the ecosystem and make it available for design, and to learn whether artificial structures contribute to reef regeneration or rather harm the coral reef ecosystem. For the research, empirical experimental methods were applied: Algorithmic coral reef design, high precision UW monitoring, computational modelling and simulation, and validated through parallel real-world physical experimentation – two Artificial Reef Prototypes (ARPs) in Gili Trawangan, Indonesia (2012–today). Multiple discrete methods and sub techniques were developed in seventeen computational experiments and applied in a way in which many are cross valid and integrated in an overall framework that is offered as a significant contribution to the field. Other main contributions include the Ecosystem-aware design approach, Key Performance Indicators (KPIs) for coral reef design, algorithmic design and fabrication of Biorock cathodes, new high precision UW monitoring strategies, long-term real-world constructed experiments, new digital analysis methods and two new front-end web-based tools for reef design and monitoring reefs. The methodological framework is a finding of the research that has many technical components that were tested and combined in this way for the very first time. In summary, the thesis responds to the urgency and relevance in preserving marine species in tropical reefs during this massive extinction period by offering a differentiated approach towards artificial coral reefs – demonstrating the feasibility of digitally designing such ‘living architecture’ according to multiple context and performance parameters. It also provides an in-depth critical discussion of computational design and architecture in the context of ecosystem regeneration and Planetary Thinking. In that respect, the thesis functions as both theoretical and practical background for computational design, ecology and marine conservation – not only to foster the design of artificial coral reefs technically but also to provide essential criteria and techniques for conceiving them. Keywords: Artificial coral reefs, computational modelling, high precision underwater monitoring, ecology in design. N2 - Charakteristisch für das Zeitalter des Klimawandels sind die durch den Menschen verursachte Meeresverschmutzung sowie ein massiver Rückgang der Artenvielfalt in den Weltmeeren. Tropische Korallenriffe sind als eines der ältesten und artenreichsten Ökosysteme der Erde besonders stark gefährdet und stehen somit symbolisch für die zerstörerischen Auswirkungen menschlicher Aktivitäten auf die Natur [4], [5]. Um dem massiven Rückgang der Korallenriffe entgegenzuwirken, wurden von Menschen künstliche Riffsysteme entwickelt [6], [7]. Sie sind Beispiele dafür, wie Architektur und die Regenerierung von Ökosystemen miteinander verbunden werden können [8]. Eine Verknüpfung von einerseits künstlichen und andererseits komplexen, sich verändernden natürlichen Systemen, stellt jedoch eine Herausforderung dar, u.a. in Bezug auf die Computermodellierung (B-Rep Modellierung). Zum Erhalt der Korallenriffe werden in der vorliegende Doktorarbeit Strategien aus der digitalen Praxis neuartig auf das Entwerfen von künstlichen Korallenriffen angewendet. Die Hauptfrage befasst sich damit, wie der Entwurfsprozess von künstlichen Korallenriffen unter Einbeziehung von Computermodellierung und hochpräzisen Überwachungsstrategien optimiert werden kann. In diesem Zusammenhang werden Techniken, Methoden sowie ein übergeordnetes Framework erforscht, welche zukünftige Forschung und Praxis in Bezug auf Ökologie-geleitete Entwurfsprozesse fördern soll. In Anbetracht der vielen vorhandenen künstlichen Riffsysteme, kann man feststellen, dass die Zusammenhänge zwischen Architektur- und Ökosystem-Anforderungen nicht genau untersucht und dadurch bei der Umsetzung nicht entsprechend berücksichtigt werden. Zum Beispiel wie Oberflächenbeschaffenheit und Materialität eine Ansiedlung von Korallenlarven begünstigt oder wie eine räumlich vielseitige Struktur die Artenvielfalt verbessern kann. Zudem fehlt ein integrierter Unterwasser-Überwachungsprozess, welcher Informationen über das Ökosystem liefert und diese dem Entwurf bereitstellt. Zusätzlich ist eine Unterwasser-Überwachung notwendig, um herauszufinden, ob die künstlichen Riffstrukturen zur Regenerierung beitragen oder dem Ökosystem gänzlich schaden. In dieser Forschungsarbeit werden empirische und experimentelle Methoden angewendet: Algorithmisches Entwerfen für Korallenriffe, hochpräzise Unterwasser-Überwachung, Computermodellierung und -simulation. Die Forschung wird seit 2012 bis heute durch zwei Riffprototypen (Artificial Reef Prototypes – ARPs) in Gili Trawangan, Indonesien validiert. Zusätzlich wurden weitere separate Methoden und Techniken in insgesamt siebzehn computergestützten Experimenten entwickelt und so angewendet, dass viele kreuzvalidiert und in ein Framework integriert sind, welches dann als bedeutender Beitrag dem Forschungsgebiet zur Verfügung steht. Weitere Hauptbeiträge sind der Ökosystem-bewusste Entwurfsansatz (Ecosystem-aware design approach), Key Performance Indicators (KPIs) für das Gestalten von Korallenriffen, algorithmisches Entwerfen und die Herstellung von Biorock-Kathoden, neue hochpräzise Unterwasser-Überwachungsstrategien, reale Langzeitexperimente, neue digitale Analysemethoden, sowie zwei webbasierte Softwareanwendungen für die Gestaltung und die Überwachung von künstlichen Korallenriffen. Das methodische Framework ist das Hauptergebnis der Forschung, da die vielen technischen Komponenten in dieser Weise zum ersten Mal getestet und kombiniert wurden. Zusammenfassend reagiert die vorliegende Doktorarbeit sowohl auf die Dringlichkeit als auch auf die Relevanz der Erhaltung von Artenvielfalt in tropischen Korallenriffen in Zeiten eines massiven Aussterbens, indem sie einen differenzierten Entwurfsansatz für künstliche Korallenriffe offeriert. Die Arbeit zeigt auf, dass ein digitales Entwerfen einer solchen „lebendigen Architektur“ unter Berücksichtigung vielfältiger Anforderungen und Leistungsparametern machbar ist. Zusätzlich bietet sie eine ausführliche kritische Diskussion über die Rolle von computergestützten Entwerfen und Architektur im Zusammenhang mit Regenerierung von Ökosystemen und “Planetary Thinking”. In dieser Hinsicht fungiert die Doktorarbeit als theoretischer und praktischer Hintergrund für computergestütztes Entwerfen, Ökologie und Meeresschutz. Eine Verbesserung des Entwerfens von künstlichen Korallenriffen wird nicht nur auf technischer Ebene aufgezeigt, sondern es werden auch die wesentlichen Kriterien und Techniken für deren Umsetzung benannt. Schlüsselwörter: Künstliche Korallenriffe, Computermodellierung, hochpräzise Unterwasser-Überwachung, Ökologie im Architekturentwurf. KW - Korallenriff KW - Algorithmus KW - Architektur KW - Meeresökologie KW - Software KW - Artificial coral reefs KW - Computational modelling KW - High precision underwater monitoring KW - Ecology in design KW - Künstliche Korallenriffe KW - Unterwasserarchitektur Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220322-46115 UR - https://artificialreefdesign.com/ SN - 978-3-00-074495-2 N1 - Die URL führt zu 3D Modelle von echten Korallenriffen. ER - TY - THES A1 - Müller, Matthias T1 - Salt-frost Attack on Concrete - New Findings regarding the Damage Mechanism N2 - The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept. To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory. The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown. The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste. Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally. As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content. T2 - Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus KW - Beton KW - Frost KW - Concrete KW - Salt frost attack KW - Damage mechanism KW - Glue Spall KW - Cryogenic Suction Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230103-48681 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4502 N1 - Englische Fassung meiner deutschsprachigen Dissertation mit dem Titel "Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus". ER - TY - THES A1 - Moosbrugger, Jennifer T1 - Design Intelligence - Human-Centered-Design for the development of industrial AI/ML agents N2 - This study deals with design for AI/ML systems, more precisely in the industrial AI context based on case studies from the factory automation field. It therefore touches on core concepts from Human-Centered-Design (HCD), User Experience (UX) and Human Computer Interaction (HCI) on one hand, as well as concepts from Artificial Intelligence (AI), Machine Learning (ML) and the impact of technology on the other. The case studies the research is based on are within the industrial AI domain. However, the final outcomes, the findings, solutions, artifacts and so forth, should be transferable to a wider spectrum of domains. The study’s aim is to examine the role of designers in the age of AI and the factors which are relevant, based on the hypothesis that current AI/ML development lacks the human perspective, which means that there are pitfalls and challenges that design can help resolve. The initial literature review revealed that AI/ML are perceived as a new design material that calls for a new design paradigm. Additional research based on qualitative case study research was conducted to gain an overview of the relevant issues and challenges. From this, 17 themes emerged, which together with explorative expert interviews and a structured literature review, were further analyzed to produce the relevant HCD, UX and HCI themes. It became clear that designers need new processes, methods, and tools in the age of AI/ML in combination with not only design, but also data science and business expertise, which is why the proposed solution in this PhD features process modules for design, data science and business collaboration. There are seven process modules and their related activities and dependencies that serve as guidelines for practitioners who want to design intelligence. A unified framework for collecting use case exemplars was created, based on a workshop with different practitioners and researchers from the area of AI/ML to support and enrich the process modules with concrete projects examples. KW - Künstliche Intelligenz KW - Benutzererlebnis KW - Human-centered Design KW - Datenkompetenz KW - Prozessmodell KW - AI, computational thinking KW - Design, UX, Human-Centered-Design KW - process, tools, methods KW - collaboration KW - Artificial Intelligence Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230719-64098 ER - TY - THES A1 - Legatiuk, Anastasiia T1 - Discrete potential and function theories on a rectangular lattice and their applications N2 - The growing complexity of modern engineering problems necessitates development of advanced numerical methods. In particular, methods working directly with discrete structures, and thus, representing exactly some important properties of the solution on a lattice and not just approximating the continuous properties, become more and more popular nowadays. Among others, discrete potential theory and discrete function theory provide a variety of methods, which are discrete counterparts of the classical continuous methods for solving boundary value problems. A lot of results related to the discrete potential and function theories have been presented in recent years. However, these results are related to the discrete theories constructed on square lattices, and, thus, limiting their practical applicability and potentially leading to higher computational costs while discretising realistic domains. This thesis presents an extension of the discrete potential theory and discrete function theory to rectangular lattices. As usual in the discrete theories, construction of discrete operators is strongly influenced by a definition of discrete geometric setting. For providing consistent constructions throughout the whole thesis, a detailed discussion on the discrete geometric setting is presented in the beginning. After that, the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice, which is the core of the discrete potential theory, its numerical analysis, and practical calculations are presented. By using the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice, the discrete potential theory is then constructed for interior and exterior settings. Several discrete interior and exterior boundary value problems are then solved. Moreover, discrete transmission problems are introduced and several numerical examples of these problems are discussed. Finally, a discrete fundamental solution of the discrete Cauchy-Riemann operator on a rectangular lattice is constructed, and basics of the discrete function theory on a rectangular lattice are provided. This work indicates that the discrete theories provide solution methods with very good numerical properties to tackle various boundary value problems, as well as transmission problems coupling interior and exterior problems. The results presented in this thesis provide a basis for further development of discrete theories on irregular lattices. KW - Diskrete Funktionentheorie KW - Diskrete Potentialtheorie KW - Diskrete Fundamentallösung KW - Transmissionsaufgabe KW - Discrete potential theory KW - Discrete function theory KW - Transmission problem KW - Discrete fundamental solution Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221220-48654 ER - TY - THES A1 - Tatarin, René T1 - Charakterisieren struktureller Veränderungen in zementgebundenen Baustoffen durch akustische zerstörungsfreie Prüfverfahren N2 - Im Rahmen dieser Arbeit wird das Charakterisieren struktureller Veränderungen zementgebundener Baustoffe durch zwei auf dem Ultraschall-Transmissionsverfahren beruhenden Methoden der zerstörungsfreien Prüfung (ZfP) mit mechanischen Wellen vorgenommen. Zur kontinuierlichen Charakterisierung der Erstarrung und Erhärtung frischer zementgebundener Systeme wird ein auf Ultraschallsensoren für Longitudinal- und Scherwellen basierendes Messsystem in Kombination mit zugehörigen Verfahrensweisen zur Datenauswertung konzipiert, charakterisiert und angewandt. Gegenüber der bislang üblichen alleinigen Bewertung der Verfestigung anhand indirekter Ultraschallparameter wie Ausbreitungsgeschwindigkeit, Signalenergie oder Frequenzgehalt der Longitudinalwelle lässt sich damit eine direkte, sensible Erfassung der sich während der Strukturbildung entwickelnden dynamischen elastischen Eigenschaften auf der Basis primärer physikalischer Werkstoffparameter erreichen. Insbesondere Scherwellen und der dynamische Schubmodul sind geeignet, den graduellen Übergang zum Festkörper mit Überschreiten der Perkolationsschwelle sensibel und unabhängig vom Luftgehalt zu erfassen. Die zeitliche Entwicklung der dynamischen elastischen Eigenschaften, die Strukturbildungsraten sowie die daraus extrahierten diskreten Ergebnisparameter ermöglichen eine vergleichende quantitative Charakterisierung der Strukturbildung zementgebundener Baustoffe aus mechanischer Sicht. Dabei lassen sich typische, oft unvermeidbare Unterschiede in der Zusammensetzung der Versuchsmischungen berücksichtigen. Der Einsatz laserbasierter Methoden zur Anregung und Erfassung von mechanischen Wellen und deren Kombination zu Laser-Ultraschall zielt darauf ab, die mit der Anwendung des konventionellen Ultraschall-Transmissionsverfahrens verbundenen Nachteile zu eliminieren. Diese resultieren aus der Sensorgeometrie, der mechanischen Ankopplung und bei einer Vielzahl von Oberflächenpunkten aus einem hohen prüftechnischen Aufwand. Die laserbasierte, interferometrische Erfassung mechanischer Wellen ist gegenüber Ultraschallsensoren rauschbehaftet und vergleichsweise unsensibel. Als wesentliche Voraussetzung der scannenden Anwendung von Laser-Ultraschall auf zementgebundene Baustoffe erfolgen systematische experimentelle Untersuchungen zur laserinduzierten ablativen Anregung. Diese sollen zum Verständnis des Anregungsmechanismus unmittelbar auf den Oberflächen von zementgebundenen Baustoffen, Gesteinskörnungen und metallischen Werkstoffen beitragen, relevante Einflussfaktoren aus den charakteristischen Materialeigenschaften identifizieren, geeignete Prozessparameter gewinnen und die Verfahrensgrenzen aufzeigen. Unter Einsatz von Longitudinalwellen erfolgt die Anwendung von Laser-Ultraschall zur zeit- und ortsaufgelösten Charakterisierung der Strukturbildung und Homogenität frischer sowie erhärteter Proben zementgebundener Baustoffe. Während der Strukturbildung wird erstmals eine simultane berührungslose Erfassung von Longitudinal- und Scherwellen vorgenommen. Unter Anwendung von tomographischen Methoden (2D-Laufzeit¬tomo¬graphie) werden überlagerungsfreie Informationen zur räumlichen Verteilung struktureller Gefügeveränderungen anhand der longitudinalen Ausbreitungsgeschwindigkeit bzw. des relativen dynamischen Elastizitätsmoduls innerhalb von virtuellen Schnittebenen geschädigter Probekörper gewonnen. Als beton-schädigende Mechanismen werden exemplarisch der kombinierte Frost-Tausalz-Angriff sowie die Alkali-Kieselsäure-Reaktion (AKR) herangezogen. Die im Rahmen dieser Arbeit entwickelten Verfahren der zerstörungsfreien Prüfung bieten erweiterte Möglichkeiten zur Charakterisierung zementgebundener Baustoffe und deren strukturellen Veränderungen und lassen sich zielgerichtet in der Werkstoffentwicklung, bei der Qualitätssicherung sowie zur Analyse von Schadensprozessen und -ursachen einsetzen. N2 - In this research, structural changes of cement-based building materials are characterized using two ultrasonic transmission-based methods of non-destructive testing (NDT) with mechanical waves. For continuous characterization of setting and hardening of fresh cementitious materials a measurement system is designed, characterized and applied based on ultrasonic compressional and shear wave transducers in combination with associated data evaluation procedures. In contrast to common non-destructive testing of setting and hardening by means of solely indirect ultrasonic parameters such as pulse velocity, signal energy or frequency content of compressional waves, a direct sensitive recording of dynamic elastic properties can be achieved during the structure formation on the basis of primary physical material parameters. Especially, shear waves and the dynamic shear modulus are suitable to capture the gradual transition to a solid with exceeding percolation threshold in a sensitive manner and independent of air content. The development of dynamic elastic properties, the structure formation rates and the extracted discrete result parameters enable a comparative and quantitative analysis of the structural formation of fresh cementitious materials from a mechanical point of view. As an advantage, often unavoidable differences in the composition of test blends can be taken into account. The application of laser-based techniques for generation and detection of mechanical waves and their combination to laser-ultrasonics eliminates the disadvantages associated with the application of conventional ultrasonic through-transmission techniques. These result from sensor geometry, mechanical coupling and, in case of numerous surface points, due to a high inspection time and effort. Furthermore, the laser-based interferometric detection of mechanical waves is noisy and relatively insensitive compared to application of ultrasonic sensors. As an essential prerequisite, systematic experimental investigations of laser-induced ablative generation are carried out for the scanning application of laser-ultrasonics on cement-based building materials. These investigations contribute to the understanding of the excitation mechanism directly on the surfaces of concrete, natural aggregates and metallic targets and to the identification of relevant influencing factors from the characteristic material properties. By gathering optimized process parameters, the limitations of laser-ultrasonics to concrete are shown. Laser-ultrasonics is applied using compressional waves for time- and space-resolved characterization of the structure formation and homogeneity of fresh and hardened specimen of cement-based building materials. During the structure formation process, the simultaneous contactless acquisition of compressional and shear waves is carried out for the first time. With the implementation of tomographic methods (2D travel-time tomography) it is possible to obtain superposition-free information on the spatial distribution of microstructural changes by means of the longitudinal ultrasonic pulse velocity or the relative dynamic modulus of elasticity within virtual cross-sections of damaged specimens. The combined freeze-thaw de-icing salt attack as well as the alkali-silica reaction (ASR) are investigated as mechanisms of concrete damage. The methods of non-destructive testing developed within the scope of this study offer extended possibilities for the characterization of cement-based building materials and their structural changes and can be applied in a targeted manner in materials development, quality control and in analysis of damage processes and causes. KW - Beton KW - Hydratation KW - Ultraschall KW - Zerstörungsfreie Werkstoffprüfung KW - Lasertechnologie KW - Laser-Ultraschall KW - elastische Parameter KW - Tomographie KW - Strukturbildung KW - Dauerhaftigkeit Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220215-45920 SN - 978-3-7369-7575-0 PB - Cuvillier Verlag CY - Göttingen ER -