TY - THES A1 - Düring, Serjoscha T1 - Between plan and reality: tracing the development dynamics of the Lanzhou New Area - a computational approach N2 - Contemporary planning practice is often criticized as too design-driven with a lack of both quantitative evaluation criteria and employment of models that anticipate the self-organizational forces shaping cities, resulting in significant gaps between plan and reality. This study aims to introduce a modular toolbox prototype for spatial-analysis in data-poor environments. It is proposed to integrate designing, evaluation, and monitoring of urban development into one framework, thus supporting data-driven, on-demand urban design, and planning processes. The proposed framework’s value will exemplarily be tested, focussing on the analysis and simulation of spatiotemporal growth trajectories taking the Lanzhou New Area as a case-study - a large scale new town project that struggles to attract residents and businesses. Conducted analysis suggests that more attention should be given to spatiotemporal development paths to ensure that cities work more efficiently throughout any stage of development. Finally, early hints on general design strategies to achieve this goal are discussed with the assistance of the proposed toolbox. KW - Stadtplanung KW - Geoinformationssystem KW - evidence-based design KW - computational planning KW - network analysis KW - Grasshopper 3D KW - spatial analysis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191108-40002 ER - TY - CHAP A1 - Dokhanchi, Najmeh Sadat A1 - Arnold, Jörg A1 - Vogel, Albert A1 - Völker, Conrad T1 - Acoustic Travel-Time Tomography: Optimal Positioning of Transceiver and Maximal Sound-Ray Coverage of the Room T2 - Fortschritte der Akustik - DAGA 2019 N2 - Acoustic travel-time tomography (ATOM) determines the distribution of the temperature in a propagation medium by measuring the travel-time of acoustic signals between transmitters and receivers. To employ ATOM for indoor climate measurements, the impulse responses have been measured in the climate chamber lab of the Bauhaus-University Weimar and compared with the theoretical results of its image source model (ISM). A challenging task is distinguishing the reflections of interest in the reflectogram when the sound rays have similar travel-times. This paper presents a numerical method to address this problem by finding optimal positions of transmitter and receiver, since they have a direct impact on the distribution of travel times. These optimal positions have the minimum number of simultaneous arrival time within a threshold level. Moreover, for the tomographic reconstruction, when some of the voxels remain empty of sound-rays, it leads to inaccurate determination of the air temperature within those voxels. Based on the presented numerical method, the number of empty tomographic voxels are minimized to ensure the best sound-ray coverage of the room. Subsequently, a spatial temperature distribution is estimated by simultaneous iterative reconstruction technique (SIRT). The experimental set-up in the climate chamber verifies the simulation results. KW - Bauphysik KW - Acoustic Travel-Time Tomography KW - Bauklimatik KW - Akustische Tomographie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190408-38778 UR - https://www.dega-akustik.de/publikationen/online-proceedings/ N1 - This conference paper has been submitted to the DAGA 2019. Thus, the original paper first is published in the "Fortschritte der Akustik - DAGA 2019" ER - TY - THES A1 - Al-Yasiri, Zainab Riyadh Shaker T1 - Function Theoretic Methods for the Analytical and Numerical Solution of Some Non-linear Boundary Value Problems with Singularities N2 - The p-Laplace equation is a nonlinear generalization of the well-known Laplace equation. It is often used as a model problem for special types of nonlinearities, and therefore it can be seen as a bridge between very general nonlinear equations and the linear Laplace equation, too. It appears in many problems for instance in the theory of non-Newtonian fluids and fluid dynamics or in rockfill dam problems, as well as in special problems of image restoration and image processing. The aim of this thesis is to solve the p-Laplace equation for 1 < p < 2, as well as for 2 < p < 3 and to find strong solutions in the framework of Clifford analysis. The idea is to apply a hypercomplex integral operator and special function theoretic methods to transform the p-Laplace equation into a p-Dirac equation. We consider boundary value problems for the p-Laplace equation and transfer them to boundary value problems for a p-Dirac equation. These equations will be solved iteratively by applying Banach’s fixed-point principle. Applying operator-theoretical methods for the p-Dirac equation, the existence and uniqueness of solutions in certain Sobolev spaces will be proved. In addition, using a finite difference approach on a uniform lattice in the plane, the fundamental solution of the Cauchy-Riemann operator and its adjoint based on the fundamental solution of the Laplacian will be calculated. Besides, we define gener- alized discrete Teodorescu transform operators, which are right-inverse to the discrete Cauchy-Riemann operator and its adjoint in the plane. Furthermore, a new formula for generalized discrete boundary operators (analogues of the Cauchy integral operator) will be considered. Based on these operators a new version of discrete Borel-Pompeiu formula is formulated and proved. This is the basis for an operator calculus that will be applied to the numerical solution of the p-Dirac equation. Finally, numerical results will be presented showing advantages and problems of this approach. N2 - Die p-Laplace-Gleichung ist eine nichtlineare Verallgemeinerung der wohlbekannten Laplace-Gleichung Die p-Laplace-Gleichung wird häufig als Referenzbeispiel für spezielle Typen von Nichtlinearitäten benutzt und kann daher auch als Brücke zwischen sehr allgemeinen nichtlinearen partiellen Differentialgleichungen und der linearen Laplace-Gleichung gesehen werden. Sie ist darüber hinaus auch das mathematische Modell für eine Reihe praxisrelevanter Probleme, wie z.B. in der Theorie nicht-newtonscher Flüssigkeiten, der Strömungsmechanik, der Durchfeuchtung von Schütt- dämmen und auch ein wichtiges Werkzeug zur Behandlung spezieller Probleme der Bildrekonstruktion und Bildverarbeitung. Das Ziel dieser Arbeit ist es, die p-Laplace-Gleichung sowohl für 1 < p < 2 als auch ür 2 < p < 3 zu lösen. Strenge Lösungen werden unter Benutzung der Clifford- Analysis konstruiert. Die Idee ist dabei, einen hyperkomplexen Integraloperator und funktionentheoretische Methoden auf die p-Laplace-Gleichung anzuwenden und diese Gleichung dadurch in eine p-Dirac-Gleichung zu transformieren, die dann besser gelöst werden kann. Es werden spezielle Randwertprobleme für die p-Laplace-Gleichung in Dirichlet-Probleme für die p-Dirac-Gleichung transformiert und dabei die Ordnung der Differentialgleichung reduziert. Die Randwertprobleme für die p-Dirac-Gleichung werden mit Hilfe des Banachschen Fixpunktprinzips iterativ analytisch gelöst. Durch Anwendung operator-theoretischer Methoden kann die Existenz und Eindeutigkeit der Lösung in bestimmten Sobolev-Räumen nachgewiesen werden. Darüber hinaus wird eine Finite Differenzenmethode auf einem gleichmäßigen Gitter in der Ebene angewandt, um die Fundamentallösung des diskreten Laplace- Operators numerisch zu berechnen. In der Folge werden daraus Fundamentallösungen des diskreten Cauchy-Riemann-Operators und seines adjungierten Operators erzeugt. Auf dieser Grundlage werden über Faltungen mit den Fundamentallösungen diskrete Teodorescu-Operatoren definiert, die rechtsinvers zum diskreten Cauchy-Riemann- Operator bzw. zum adjungierten diskreten Cauchy-Riemann-Operator sind. Weiterhin werden diskrete Randoperatoren, die analog zum Cauchyschen Integraloperator sind, eingeführt. Alle vorgenannten Operatoren werden in einer neuen Version einer diskreten Borel-Pompeiu-Formel zusammengeführt und bilden die Grundlage für eine diskrete Operatorenrechnung. Diese Untersuchungen erweitern bekannte Resultate auf wesentlich größere Funktionenklassen als bisher möglich waren. Die diskrete Opera- torenrechnung wird benutzt, um die diskretisierten Randwertprobleme für die p-Dirac- Gleichung numerisch zu lösen. Numerische Resultate werden vorgestellt und diskutiert. Dabei wird auf Vor- und Nachteile der entwickelten Methode eingegangen. KW - discrete function theory KW - finite difference methods KW - p-Laplace equation KW - Finite-Differenzen-Methode Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190506-38987 ER - TY - THES A1 - Steiner, Marion T1 - Die chilenische Steckdose. Kleine Weltgeschichte der deutschen Elektrifizierung von Valparaíso und Santiago, 1880-1920 N2 - Am Beispiel der Elektrifizierung zweier Großstädte an der Westküste Südamerikas zeigt die Arbeit den globalen Einfluss deutscher Industrie- und Finanzakteure auf technische, städtebauliche und gesellschaftlich-kulturelle Entwicklungen zur Blütezeit des europäischen Imperialismus auf. Damit werden die Regionalgeschichten der chilenischen Hauptstadtregion und der Elektropolis Berlin zu einer Globalgeschichte miteinander verknüpft. Ein Hauptaugenmerk der Analyse liegt dabei auf den weltweiten Akteursnetzwerken und Machtverhältnissen sowie dem kulturellen Erbe und seiner gegenwärtigen Interpretation. N2 - Resumen. Tomando como ejemplo la electrificación de dos grandes ciudades en la costa oeste de Sudamérica, la tesis muestra la influencia global de actores industriales y financieros alemanes en el desarrollo técnico, urbano y sociocultural en el apogeo del imperialismo europeo. De esta manera, las historias regionales del centro urbano de Chile y la Electrópolis Berlín se unen para formar una historia global. El análisis se centra en las redes mundiales de actores y las relaciones de poder, así como en el patrimonio cultural y su interpretación actual. N2 - Abstract. Using the example of the electrification of two large cities on the South American west coast, the thesis shows the global influence of German industrial and financial actors on technical, urban and socio-cultural developments at the heyday of European imperialism. In this way, the regional histories of Chile’s capital region and the Elektropolis Berlin are linked to form a global history. The analysis focuses on the worldwide actor networks and power relations as well as on the cultural heritage and its current interpretation. KW - Weltgeschichte KW - Stadtforschung KW - Elektrifizierung KW - Infrastruktur KW - Kulturerbe KW - Globalgeschichte KW - Infrastrukturgeschichte KW - Valparaíso KW - Wirtschaftsimperialismus KW - Technikgeschichte KW - Industriekultur KW - Stadtentwicklung KW - Elektropolis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190517-39257 ER - TY - THES A1 - Nogueira, Priscilla T1 - Brazilian battlers' housing. Histories of self-production - histories of social rise N2 - Brazilian battlers’ housing discusses the self-production of dwellings in the circumstances of the socioeconomic rise of the so-called Brazilian new middle class, occurred on the first decade of the years 2000. Battlers are a precarious working class of about 100 million people, who have used their recently increased purchase power to informally solve their private housing demands, planning, building and renovating their homes themselves, with limited technical knowledge and almost no access to formal technicians as for example architects. The result is a mode of housing production, which spreads over the territory in micro-local self-initiatives and informal social practices of construction and management. With the support of a controversial manpower, this practice presents all sorts of technical complications, but at the same time expedient ways of affordability and creative spatial solutions for ordinary constructive problems. Such initiatives have consolidated Brazilian informal settlements and peripheral subdivisions, attending a demand poorly responded by the government. This research recognises the benefits of the self-production, but questions the conditions under which it happens and asks if it really collaborates for a true social rise of those who are engaged in it. With an empirical and qualitative approach and taking dwelling construction processes leaded by battlers as main information sources, the academic work responds if and how the socioeconomic rise of the Brazilian battlers has exactly affected the self-production of dwellings. For that, battlers’ self-production of dwellings is analysed and discussed in five main aspects: 1) acquisition of land and real state, 2) building overtime, 3) space and creative power, 4) technical complications and building materials and 5) manpower and know-how. KW - Brazil KW - self-production KW - low middle class KW - social housing KW - Sozialwohnung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190506-38953 ER - TY - JOUR A1 - Morgenthal, Guido A1 - Eick, Jan Frederick A1 - Rau, Sebastian A1 - Taraben, Jakob T1 - Wireless Sensor Networks Composed of Standard Microcomputers and Smartphones for Applications in Structural Health Monitoring JF - Sensors - Special Issue Selected Papers from 7th Asia-Pacific Workshop on Structural Health Monitoring N2 - Wireless sensor networks have attracted great attention for applications in structural health monitoring due to their ease of use, flexibility of deployment, and cost-effectiveness. This paper presents a software framework for WiFi-based wireless sensor networks composed of low-cost mass market single-board computers. A number of specific system-level software components were developed to enable robust data acquisition, data processing, sensor network communication, and timing with a focus on structural health monitoring (SHM) applications. The framework was validated on Raspberry Pi computers, and its performance was studied in detail. The paper presents several characteristics of the measurement quality such as sampling accuracy and time synchronization and discusses the specific limitations of the system. The implementation includes a complementary smartphone application that is utilized for data acquisition, visualization, and analysis. A prototypical implementation further demonstrates the feasibility of integrating smartphones as data acquisition nodes into the network, utilizing their internal sensors. The measurement system was employed in several monitoring campaigns, three of which are documented in detail. The suitability of the system is evaluated based on comparisons of target quantities with reference measurements. The results indicate that the presented system can robustly achieve a measurement performance commensurate with that required in many typical SHM tasks such as modal identification. As such, it represents a cost-effective alternative to more traditional monitoring solutions. KW - Structural Health Monitoring KW - Mikrocomputer KW - Smartphone KW - Schwingungsmessung KW - Wireless sensor network KW - Raspberry Pi KW - Smartphones KW - Vibration measurements KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190514-39123 UR - https://www.mdpi.com/1424-8220/19/9/2070 VL - 2019 IS - Volume 19, Issue 9, 2070 PB - MDPI ER - TY - JOUR A1 - Bielik, Martin A1 - Schneider, Sven A1 - Kuliga, Saskia A1 - Griego, Danielle A1 - Ojha, Varun A1 - König, Reinhard A1 - Schmitt, Gerhard A1 - Donath, Dirk ED - Resch, Bernd ED - Szell, Michael T1 - Examining Trade-Offs between Social, Psychological, and Energy Potential of Urban Form JF - ISPRS International Journal of Geo-Information N2 - Urban planners are often challenged with the task of developing design solutions which must meet multiple, and often contradictory, criteria. In this paper, we investigated the trade-offs between social, psychological, and energy potential of the fundamental elements of urban form: the street network and the building massing. Since formal mehods to evaluate urban form from the psychological and social point of view are not readily available, we developed a methodological framework to quantify these criteria as the first contribution in this paper. To evaluate the psychological potential, we conducted a three-tiered empirical study starting from real world environments and then abstracting them to virtual environments. In each context, the implicit (physiological) response and explicit (subjective) response of pedestrians were measured. To quantify the social potential, we developed a street network centrality-based measure of social accessibility. For the energy potential, we created an energy model to analyze the impact of pure geometric form on the energy demand of the building stock. The second contribution of this work is a method to identify distinct clusters of urban form and, for each, explore the trade-offs between the select design criteria. We applied this method to two case studies identifying nine types of urban form and their respective potential trade-offs, which are directly applicable for the assessment of strategic decisions regarding urban form during the early planning stages. KW - Planung KW - social accessibility KW - urban perception KW - energy demand KW - urban form KW - trade-offs KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190408-38695 UR - https://www.mdpi.com/2220-9964/8/2/52 VL - 2019 EP - Volume 8, Issue 2, 52 ER - TY - THES A1 - Schemmann, Christoph T1 - Optimierung von radialen Verdichterlaufrädern unter Berücksichtigung empirischer und analytischer Vorinformationen mittels eines mehrstufigen Sampling Verfahrens T1 - Optimization of Centrifugal Compressor Impellers by a Multi-fidelity Sampling Method Taking Analytical and Empirical Information into Account N2 - Turbomachinery plays an important role in many cases of energy generation or conversion. Therefore, turbomachinery is a promising approaching point for optimization in order to increase the efficiency of energy use. In recent years, the use of automated optimization strategies in combination with numerical simulation has become increasingly popular in many fields of engineering. The complex interactions between fluid and solid mechanics encountered in turbomachines on the one hand and the high computational expense needed to calculate the performance on the other hand, have, however, prevented a widespread use of these techniques in this field of engineering. The objective of this work was the development of a strategy for efficient metamodel based optimization of centrifugal compressor impellers. In this context, the main focus is the reduction of the required numerical expense. The central idea followed in this research was the incorporation of preliminary information acquired from low-fidelity computation methods and empirical correlations into the sampling process to identify promising regions of the parameter space. This information was then used to concentrate the numerically expensive high-fidelity computations of the fluid dynamic and structure mechanic performance of the impeller in these regions while still maintaining a good coverage of the whole parameter space. The development of the optimization strategy can be divided into three main tasks. Firstly, the available preliminary information had to be researched and rated. This research identified loss models based on one dimensional flow physics and empirical correlations as the best suited method to predict the aerodynamic performance. The loss models were calibrated using available performance data to obtain a high prediction quality. As no sufficiently exact models for the prediction of the mechanical loading of the impellercould be identified, a metamodel based on finite element computations was chosen for this estimation. The second task was the development of a sampling method which concentrates samples in regions of the parameter space where high quality designs are predicted by the preliminary information while maintaining a good overall coverage. As available methods like rejection sampling or Markov-chain Monte-Carlo methods did not meet the requirements in terms of sample distribution and input correlation, a new multi-fidelity sampling method called “Filtered Sampling“has been developed. The last task was the development of an automated computational workflow. This workflow encompasses geometry parametrization, geometry generation, grid generation and computation of the aerodynamic performance and the structure mechanic loading. Special emphasis was put into the development of a geometry parametrization strategy based on fluid mechanic considerations to prevent the generation of physically inexpedient designs. Finally, the optimization strategy, which utilizes the previously developed tools, was successfully employed to carry out three optimization tasks. The efficiency of the method was proven by the first and second testcase where an existing compressor design was optimized by the presented method. The results were comparable to optimizations which did not take preliminary information into account, while the required computational expense cloud be halved. In the third testcase, the method was applied to generate a new impeller design. In contrast to the previous examples, this optimization featuredlargervariationsoftheimpellerdesigns. Therefore, theapplicability of the method to parameter spaces with significantly varying designs could be proven, too. N2 - Turbomaschinen sind eine entscheidende Komponente in vielen Energiewandlungs- oder Energieerzeugungsprozessen und daher als vielversprechender Ansatzpunkt für eine Effizienzsteigerung der Energie-und Ressourcennutzung anzusehen. Im Laufe des letzten Jahrzehnts haben automatisierte Optimierungsmethoden in Verbindung mit numerischer Simulation zunehmend breitere Verwendung als Mittel zur Effizienzsteigerung in vielen Bereichen der Ingenieurwissenschaften gefunden. Allerdings standen die komplexen Interaktionen zwischen Strömungs- und Strukturmechanik sowie der hohe nummerische Aufwand einem weitverbreiteten Einsatz dieser Methoden im Turbomaschinenbereich bisher entgegen. Das Ziel dieser Forschungsaktivität ist die Entwicklung einer effizienten Strategie zur metamodellbasierten Optimierung von radialen Verdichterlaufrädern. Dabei liegt der Schwerpunkt auf einer Reduktion des benötigten numerischen Aufwandes. Der in diesem Vorhaben gewählte Ansatz ist das Einbeziehen analytischer und empirischer Vorinformationen (“lowfidelity“) in den Sampling Prozess, um vielversprechende Bereiche des Parameterraumes zu identifizieren. Diese Informationen werden genutzt um die aufwendigen numerischen Berechnungen (“high-fidelity“) des strömungs- und strukturmechanischen Verhaltens der Laufräder in diesen Bereichen zu konzentrieren, während gleichzeitig eine ausreichende Abdeckung des gesamten Parameterraumes sichergestellt wird. Die Entwicklung der Optimierungsstrategie ist in drei zentrale Arbeitspakete aufgeteilt. In einem ersten Schritt werden die verfügbaren empirischen und analytischen Methoden gesichtet und bewertet. In dieser Recherche sind Verlustmodelle basierend auf eindimensionaler Strömungsmechanik und empirischen Korrelationen als bestgeeignete Methode zur Vorhersage des aerodynamischen Verhaltens der Verdichter identifiziert worden. Um eine hohe Vorhersagegüte sicherzustellen, sind diese Modelle anhand verfügbarer Leistungsdaten kalibriert worden. Da zur Vorhersage der mechanischen Belastung des Laufrades keine brauchbaren analytischen oder empirischen Modelle ermittelt werden konnten, ist hier ein Metamodel basierend auf Finite-Element Berechnungen gewählt worden. Das zweite Arbeitspaket beinhaltet die Entwicklung der angepassten Samplingmethode, welche Samples in Bereichen des Parameterraumes konzentriert, die auf Basis der Vorinformationen als vielversrechend angesehen werden können. Gleichzeitig müssen eine gleichmäßige Abdeckung des gesamten Parameterraumes und ein niedriges Niveau an Eingangskorrelationen sichergestellt sein. Da etablierte Methoden wie Markov-Ketten-Monte-Carlo-Methoden oder die Verwerfungsmethode diese Voraussetzungen nicht erfüllen, ist ein neues, mehrstufiges Samplingverfahren (“Filtered Sampling“) entwickelt worden. Das letzte Arbeitspaket umfasst die Entwicklung eines automatisiertenSimulations-Workflows. Dieser Workflow umfasst Geometrieparametrisierung, Geometrieerzeugung, Netzerzeugung sowie die Berechnung des aerodynamischen Betriebsverhaltens und der strukturmechanischen Belastung. Dabei liegt ein Schwerpunkt auf der Entwicklung eines Parametrisierungskonzeptes, welches auf strömungsmechanischen Zusammenhängen beruht, um so physikalisch nicht zielführende Parameterkombinationen zu vermeiden. Abschließend ist die auf den zuvor entwickelten Werkzeugen aufbauende Optimierungsstrategie erfolgreich eingesetzt worden, um drei Optimierungsfragestellungen zu bearbeiten. Im ersten und zweiten Testcase sind bestehende Verdichterlaufräder mit der vorgestellten Methode optimiert worden. Die erzielten Optimierungsergebnisse sind von ähnlicher Güte wie die solcher Optimierungen, die keine Vorinformationen berücksichtigen, allerdingswirdnurdieHälfteannumerischemAufwandbenötigt. IneinemdrittenTestcase ist die Methode eingesetzt worden, um ein neues Laufraddesign zu erzeugen. Im Gegensatz zu den vorherigen Beispielen werden im Rahmen dieser Optimierung stark unterschiedliche Designs untersucht. Dadurch kann an diesem dritten Beispiel aufgezeigt werden, dass die Methode auch für Parameterräume mit stakt variierenden Designs funktioniert. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,3 KW - Simulation KW - Maschinenbau KW - Optimierung KW - Strömungsmechanik KW - Strukturmechanik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190910-39748 ER - TY - THES A1 - Tan, Fengjie T1 - Shape Optimization Design of Arch Type Dams under Uncertainties N2 - Due to an increased need for hydro-electricity, water storage, and flood protection, it is assumed that a series of new dams will be built throughout the world. Comparing existing design methodologies for arch-type dams, model-based shape optimization can effectively reduce construction costs and leverage the properties of construction materials. To apply the means of shape optimization, suitable variables need to be chosen to formulate the objective function, which is the volume of the arch dam here. In order to increase the consistency with practical conditions, a great number of geometrical and behavioral constraints are included in the mathematical model. An optimization method, namely Genetic Algorithm is adopted which allows a global search. Traditional optimization techniques are realized based on a deterministic approach, which means that the material properties and loading conditions are assumed to be fixed values. As a result, the real-world structures that are optimized by these approaches suffer from uncertainties that one needs to be aware of. Hence, in any optimization process for arch dams, it is nec- essary to find a methodology that is capable of considering the influences of uncertainties and generating a solution which is robust enough against the uncertainties. The focus of this thesis is the formulation and the numerical method for the optimization of the arch dam under the uncertainties. The two main models, the probabilistic model, and non-probabilistic models are intro- duced and discussed. Classic procedures of probabilistic approaches un- der uncertainties, such as RDO (robust design optimization) and RBDO (reliability-based design optimization), are in general computationally ex- pensive and rely on estimates of the system’s response variance and fail- ure probabilities. Instead, the robust optimization (RO) method which is based on the non-probabilistic model, will not follow a full probabilistic approach but works with pre-defined confidence levels. This leads to a bi-level optimization program where the volume of the dam is optimized under the worst combination of the uncertain parameters. By this, robust and reliable designs are obtained and the result is independent of any as- sumptions on stochastic properties of the random variables in the model. The optimization of an arch-type dam is realized here by a robust optimiza- tion method under load uncertainty, where hydraulic and thermal loads are considered. The load uncertainty is modeled as an ellipsoidal expression. Comparing with any traditional deterministic optimization (DO) method, which only concerns the minimum objective value and offers a solution candidate close to limit-states, the RO method provides a robust solution against uncertainties. All the above mentioned methods are applied to the optimization of the arch dam to compare with the optimal design with DO methods. The re- sults are compared and analyzed to discuss the advantages and drawbacks of each method. In order to reduce the computational cost, a ranking strategy and an ap- proximation model are further involved to do a preliminary screening. By means of these, the robust design can generate an improved arch dam structure which ensures both safety and serviceability during its lifetime. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,2 KW - Wasserbau KW - Staudamm KW - dams Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190819-39608 ER - TY - THES A1 - Hasche, Katja T1 - Substanz, Struktur oder Bild? Denkmalpflegerische Erfassung von Siedlungen und Wohnanlagen der 1950er bis 1980er Jahre in Westeuropa N2 - Die Dissertation umfasst eine vertiefende Untersuchung der denkmalpflegerischen Erfassung von Siedlungen und Wohnanlagen als eine der wichtigsten und umfangreichsten Bautypologien der 1950er bis 1980er Jahre in Westeuropa. Die Beschäftigung mit Bauten der 1950er bis 1980er Jahre führt bei Denkmalpflegern, Architekten, Bewohnern und Politikern immer wieder zu Überlegungen, ob diese besondere Erfassungs- und Erhaltungsstrategien erfordern. Dabei wirft die Typologie des Siedlungsbaus besondere Fragen auf, da sie neben architektonischen Aspekten auch städtebauliche, landschaftsplanerische und sozialwissenschaftliche Bedeutungsebenen umfasst. Nicht zuletzt sind Siedlungen der 1950er bis 1980er Jahre aus denkmalpflegerischer Sicht häufig stark gefährdet. Obwohl die meisten Siedlungen noch nicht ausreichend kunsthistorisch gewürdigt und erfasst sind, unterliegen sie einem hohen Veränderungsdruck. Die teilweise enorme städtebauliche Dimension und Monofunktionalität der Anlagen, die häufig aufgrund von seriellen Bautypen und vorfabrizierten Elementen gleichförmige architektonische Gestaltung und eine Vernachlässigung im Bauunterhalt erschweren den Zugang zu dieser Baugattung. Gewandelte Wohnbedürfnisse sowie bauphysikalische, energietechnische oder ästhetische Maßnahmen führen zur Veränderung der noch relativ jungen Bausubstanz. Zudem weisen Siedlungen der Nachkriegszeit aufgrund ihrer teilweise sehr großzügigen Freiraumstruktur ein großes Potential zur Nachverdichtung auf. Die Auswahl der in dieser Arbeit untersuchten Länder und Siedlungen ergab sich aus der Auswertung einer europaweiten Befragung von Denkmalämtern sowie anschließend geführten Gesprächen mit Fachleuten. Die untersuchten 20 Siedlungen und Wohnanlagen repräsentieren verschiedene Länder (Deutschland, Österreich, Schweiz, Frankreich, Niederlande, England) sowie Bauepochen und Siedlungstypologien, die von der Einfamilienhaussiedlung über Siedlungen mit gemischter Bautypologie hin zur Großsiedlung reichen. Anhand der unterschiedlichen Fallbeispiele wird aufgezeigt, inwiefern die jeweiligen Länder, Bauepochen beziehungsweise Siedlungstypologien Einfluss auf die denkmalpflegerischen Erfassungsstrategien haben. Zusammenfassend lässt sich resümieren, dass die Gesetzesgrundlagen und Denkmalkriterien für eine denkmalpflegerische Erfassung von Bauten der 1950er bis 1980er Jahre in den meisten Ländern konstant bleiben, während sich in den Bereichen Zeitpunkt, Auswahl und Einbindung der Öffentlichkeit eine Modifizierung oder zumindest eine Reflektion der bisherigen Strukturen abzeichnet. Sinnvoll und wünschenswert erscheint darüber hinaus ein verstärkter Austausch der Denkmalpflege über die nationalen Grenzen hinweg und ein gegenseitiges Lernen voneinander. KW - Architektur KW - Denkmalpflege KW - Siedlung KW - Inventarisierung KW - Nachkriegsarchitektur Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190924-39921 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/3998 ER - TY - THES A1 - Lee, Sunju T1 - Die kinder- und jugendfreundliche Stadtentwicklung in Korea BT - Studie über den Beitrag der Schulen und Schulgelände zur gelingenden Umsetzung der kinder- und jugendfreundlichen Stadtentwicklung in Korea N2 - Die vorliegende Arbeit hat die Absicht, den Bedarf der Umsetzung der Planungsidee ‚kinder- und jugendfreundliche Stadtentwicklung’ in Korea zu erforschen und Vorschläge für die Umsetzung zu machen. Darüber hinaus will sie herausfinden, warum man sich bezüglich der Durchführung der kinder- und jugendfreundlichen Stadtentwicklung zunächst auf die Schulen und deren Umgebungen konzentrieren soll. Deshalb widmet sich die Dissertation zuerst der Literaturrecherche, sowohl was den Begriff der kinder- und jugendfreundlichen Stadtentwicklung angeht als auch der Literatur bezüglich des Beitrags der Schulen zur Realisierung der kinder- und jugendfreundlichen Stadtentwicklung. Danach wird untersucht, ob das deutsche Instrument ‚Spielleitplanung‘ sich als Leitfaden für die gesamte Konzeption der koreanischen kinder- und jugendfreundlichen Stadtentwicklung eignet. Darüber hinaus werden Interviews mit koreanischen Experten aus Stadtplanung und Architektur, Pädagogik und öffentlicher Verwaltung als Forschungsmethode verwendet, um in Bezug auf die kinder- jungendfreundliche Stadtentwicklung den koreanischen Zustand zu analysieren. Zuletzt werden anhand der Untersuchungsergebnisse Handlungs-empfehlungen für die Durchführung der koreanischen kinder- und jugend-freundlichen Stadtentwicklung formuliert. Anhand dieser Forschung kann konstatiert werden, dass die kinder- und jugendfreundliche Stadtentwicklung eine wichtige Planungsidee ist, weil dadurch Stadtplanerinnen und Stadtplaner sowohl zum körperlichen und geistigen gesunden Aufwachsen von Kindern und Jugendlichen als auch zur Entwicklung ihrer sozialen Kompetenzen erheblich beitragen können. Vor allem soll man die koreanische kinder- und jugendfreundliche Stadtentwicklung zunächst auf den Schulen und den schulischen Umgebungen umsetzen. Denn dadurch lassen sich vielseitige eventuelle Hindernisse bei der Durchführung der kinder- und jugendfreundlichen Stadtentwicklung vermeiden. Ein weiterer Grund ist, dass die Schulen in Korea nicht nur in der Gesellschaft eine zentrale Rolle spielen, sondern auch im Rahmen der Stadtplanung. Auffällig ist, dass die kinder- und jugendfreundliche Stadtentwicklung sowohl auf die räumlichen Gestaltungen als auch auf die Beteiligung von Kindern und Jugendlichen in der städtischen Planung fokussiert ist. Allerdings werden bei der Stadtentwicklung die Kinder und Jugendliche in Korea noch nicht als wichtige Akteure angesehen. Darum soll man die Spielleitplanung in Korea einbeziehen, weil sie als Leitbild bei einer Konzeption der koreanischen kinder- und jugendlichen Stadtentwicklung fungieren kann. Jedoch müssen dabei die kulturellen Unterschiede zwischen Deutschland und Korea berücksichtigt werden. Weiterhin wurde durch die Interviews festgestellt, dass das Interesse und der Wille von Experten aus der Stadtplanung an Kinder- und Jugendfreundlichkeit die wichtigsten Voraussetzungen sind, um die kinder- und jugendfreundliche Stadtentwicklung in Korea zu verankern und zu verbreiten. KW - Stadtentwicklung KW - Korea KW - Schule KW - Spielleitplanung KW - UN-Kinderrechtskonvention KW - Child Friendly Cities Initiative KW - Kind KW - Jugend KW - kinder- und jugendfreundliche Stadtentwicklung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190902-39718 ER - TY - THES A1 - Walther, Franziska T1 - Über den Wirkungsanspruch von Illustratoren in literarischer Buchillustration: Eine diskurskritische und praxis-basierte Studie N2 - Zum Begriff Illustration scheint ein Missverhältnis zwischen wissenschaftlicher Rezeption und praktischem Gegenstand vorzuliegen. Traditionell bezeichnet der Begriff Illustration ein Bild, das einen textlich vorangestellten Inhalt noch einmal visuell wiederholt und auf diesem Weg in einem Abbild verdoppelt. Traditionelle Illustration benennt also ein sekundäres, explizit von einem anderen Inhalt abhängiges Bild, das auch weggelassen werden könnte, ohne das Inhalt verloren geht. Genutzt wird dieser traditionelle Illustrationsbegriff heute unter anderem in den Forschungsfeldern der Kunstgeschichte, der Bildwissenschaften und der Literatur­wissenschaften. Aus der Perpektive der Praxis birgt der traditionelle Illustrationsbegriff ein grundsätzliches Problem in sich. Er versucht, mit einer statischen Definition ein äußerst lebendiges visuelles Phänomen unserer heutigen Zeit zu beschreiben. Professionelle Berufszeichner, die sogenannten Illustratorinnen und Illustratoren, kreieren heute Werke, die mit dem traditionellen Illustrations­begriff nicht mehr beschreibbar sind. Mehr noch, der traditionelle Illustrationsbegriff macht blind für diese Entwicklungen, die sich deshalb außerhalb des wissenschaft­lichen Diskurses abspielen. Die vorliegende Arbeit möchte deshalb einen Blick auf den Zustand zeitgenössischer literarischer Buch­illustration werfen, um den Begriff der Illustration in seiner aktuellen Unschärfe zu präzisieren, zu erweitern und somit zu aktualisieren. KW - Illustration KW - Illustriertes Buch KW - Autorschaft KW - Buchgestaltung KW - Digitalisierung KW - Bild-Autorenschaft KW - Text-bild-basierte Narration KW - Traditioneller Illustrationsbegriff KW - Zeitgenössischer Illustrationsbegriff KW - Praxisbasierte Forschung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190924-39888 ER - TY - THES A1 - Zafar, Usman T1 - Probabilistic Reliability Analysis of Wind Turbines N2 - Renewable energy use is on the rise and these alternative resources of energy can help combat with the climate change. Around 80% of the world's electricity comes from coal and petroleum however, the renewables are the fastest growing source of energy in the world. Solar, wind, hydro, geothermal and biogas are the most common forms of renewable energy. Among them, wind energy is emerging as a reliable and large-scaled source of power production. The recent research and confidence in the performance has led to the construction of more and bigger wind turbines around the world. As wind turbines are getting bigger, a concern regarding their safety is also in discussion. Wind turbines are expensive machinery to construct and the enormous capital investment is one of the main reasons, why many countries are unable to adopt to the wind energy. Generally, a reliable wind turbine will result in better performance and assist in minimizing the cost of operation. If a wind turbine fails, it's a loss of investment and can be harmful for the surrounding habitat. This thesis aims towards estimating the reliability of an offshore wind turbine. A model of Jacket type offshore wind turbine is prepared by using finite element software package ABAQUS and is compared with the structural failure criteria of the wind turbine tower. UQLab, which is a general uncertainty quantification framework developed at ETH Zürich, is used for the reliability analysis. Several probabilistic methods are included in the framework of UQLab, which include Monte Carlo, First Order Reliability Analysis and Adaptive Kriging Monte Carlo simulation. This reliability study is performed only for the structural failure of the wind turbine but it can be extended to many other forms of failures e.g. reliability for power production, or reliability for different component failures etc. It's a useful tool that can be utilized to estimate the reliability of future wind turbines, that could result in more safer and better performance of wind turbines. KW - Windturbine KW - Windenergie KW - Wind Turbines KW - Wind Energy KW - Reliability Analysis KW - Zuverlässigkeitsanalyse Y1 - 2019 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3977 ER - TY - THES A1 - Nickerson, Seth T1 - Thermo-Mechanical Behavior of Honeycomb, Porous, Microcracked Ceramics BT - Characterization and analysis of thermally induced stresses with specific consideration of synthetic, porous cordierite honeycomb substrates N2 - The underlying goal of this work is to reduce the uncertainty related to thermally induced stress prediction. This is accomplished by considering use of non-linear material behavior, notably path dependent thermal hysteresis behavior in the elastic properties. Primary novel factors of this work center on two aspects. 1. Broad material characterization and mechanistic material understanding, giving insight into why this class of material behaves in characteristic manners. 2. Development and implementation of a thermal hysteresis material model and its use to determine impact on overall macroscopic stress predictions. Results highlight microcracking evolution and behavior as the dominant mechanism for material property complexity in this class of materials. Additionally, it was found that for the cases studied, thermal hysteresis behavior impacts relevant peak stress predictions of a heavy-duty diesel particulate filter undergoing a drop-to-idle regeneration by less than ~15% for all conditions tested. It is also found that path independent heating curves may be utilized for a linear solution assumption to simplify analysis. This work brings forth a newly conceived concept of a 3 state, 4 path, thermally induced microcrack evolution process; demonstrates experimental behavior that is consistent with the proposed mechanisms, develops a mathematical framework that describes the process and quantifies the impact in a real world application space. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,4 KW - Keramik KW - ceramics Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190911-39753 ER - TY - THES A1 - Steindorf, Johanna T1 - Speaking from Somewhere: Der Audio-Walk als künstlerische Praxis und Methode N2 - In der vorliegenden Arbeit „Speaking from Somewhere: Der Audio-Walk als künstlerische Praxis und Methode“ wird der Audio-Walk auf theoretischer und praktischer Basis untersucht. Der erste Teil widmet sich dem Audio-Walk als künstlerisches Format. Darin wird analysiert, wie dieses aufgebaut ist und welche Komponenten wie zusammenwirken, damit sich die Darbietung – und die dafür charakteristisch intensive Wirkung – entfalten kann. Im zweiten Teil wird der Audio-Walk als experimentelle mobile Methode für die künstlerische Forschung betrachtet. Im Zentrum steht dabei die Frage, wie sich das künstlerische Format nutzen lässt, um spezifische Fragestellungen an einen ausgewählten Personenkreis zu adressieren, der sich währenddessen in einer inszenierten Situation befindet. Der Schwerpunkt liegt dabei auf Audio-Walk-Experimenten, die mit dieser Absicht entwickelt wurden. Als Fallbeispiel für die Methode dient dabei die Zusammenarbeit mit einer Gruppe kürzlich nach Deutschland migrierter Frauen. KW - Aufführung KW - Migration KW - Feminismus KW - Klangkunst KW - Künstlerische Forschung KW - Audio-Walk KW - Audiowalk KW - Psychogeographie KW - Kunst KW - Mobile Media Art Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190924-39930 ER - TY - RPRT A1 - Buschow, Christopher A1 - Wellbrock, Christian-Mathias T1 - Money for nothing and content for free? Zahlungsbereitschaft für digitaljournalistische Inhalte N2 - Frei nach dem Motto "Money for nothing and content for free" werden tagesaktuelle Informationen ebenso wie aufwändig recherchierte Reportagen im Digitalen vornehmlich kostenfrei genutzt. Wie können journalistische Angebote sich also nachhaltig refinanzieren? Die vorliegende Studie stellt Nutzerinnen und Nutzer in den Mittelpunkt. Sie fragt nach den Gründen für fehlende Zahlungsbereitschaft sowie danach, warum und wofür gezahlt wird. Außerdem gibt sie Medienschaffenden konkrete Handlungsempfehlungen, um ihre journalistischen Produkte ansprechend zu gestalten und so die Zahlungsbereitschaft von Leserinnen und Lesern zu steigern. KW - Neue Medien KW - Nutzung KW - Zahlungsbereitschaft KW - Journalismus KW - Geschäftsmodell KW - Digitaljournalismus KW - Medienbudget KW - Medienmarkt Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191111-40168 UR - https://www.medienanstalt-nrw.de/fileadmin/user_upload/lfm-nrw/Foerderung/Forschung/Zahlunsbereitschaft/LFMNRW_Whitepaper_Zahlungsbereitschaft.pdf ER - TY - RPRT A1 - Buschow, Christopher A1 - Wellbrock, Christian-Mathias T1 - Money for nothing and content for free? Willingness to pay for digital journalism N2 - True to the motto “Money for nothing and content for free”, both up-to-date information and thoroughly researched reporting are principally used free of charge in their digital forms. Considering this, how can journalism be funded sustainably? This study focuses on users and investigates the reasons for their lack of willingness to pay for content, as well as what they do pay for, and why. KW - Neue Medien KW - Nutzung KW - Zahlungsbereitschaft KW - Journalismus KW - Geschäftsmodell KW - digital media KW - media use KW - willingness to pay KW - business model KW - price policy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191111-40175 UR - https://www.medienanstalt-nrw.de/fileadmin/user_upload/lfm-nrw/Foerderung/Forschung/Zahlunsbereitschaft/Money_For_Nothing_And_Content_For_Free_Willingness_To_Pay_For_Digital_Journalism.pdf ER - TY - THES A1 - Zabel, Volkmar ED - Könke, Carsten ED - Lahmer, Tom ED - Rabczuk, Timon T1 - Operational modal analysis - Theory and aspects of application in civil engineering N2 - In recent years the demand on dynamic analyses of existing structures in civil engineering has remarkably increased. These analyses are mainly based on numerical models. Accordingly, the generated results depend on the quality of the used models. Therefore it is very important that the models describe the considered systems such that the behaviour of the physical structure is realistically represented. As any model is based on assumptions, there is always a certain degree of uncertainty present in the results of a simulation based on the respective numerical model. To minimise these uncertainties in the prediction of the response of a structure to a certain loading, it has become common practice to update or calibrate the parameters of a numerical model based on observations of the structural behaviour of the respective existing system. The determination of the behaviour of an existing structure requires experimental investigations. If the numerical analyses concern the dynamic response of a structure it is sensible to direct the experimental investigations towards the identification of the dynamic structural behaviour which is determined by the modal parameters of the system. In consequence, several methods for the experimental identification of modal parameters have been developed since the 1980ies. Due to various technical restraints in civil engineering which limit the possibilities to excitate a structure with economically reasonable effort, several methods have been developed that allow a modal identification form tests with an ambient excitation. The approach of identifying modal parameters only from measurements of the structural response without precise knowledge of the excitation is known as output-only or operational modal analysis. Since operational modal analysis (OMA) can be considered as a link between numerical modelling and simulation on the one hand and the dynamic behaviour of an existing structure on the other hand, the respective algorithms connect both the concepts of structural dynamics and mathematical tools applied within the processing of experimental data. Accordingly, the related theoretical topics are revised after an introduction into the topic. Several OMA methods have been developed over the last decades. The most established algorithms are presented here and their application is illustrated by means of both a small numerical and an experimental example. Since experimentally obtained results always underly manifold influences, an appropriate postprocessing of the results is necessary for a respective quality assessment. This quality assessment does not only require respective indicators but should also include the quantification of uncertainties. One special feature in modal testing is that it is common to instrument the structure in different sensor setups to improve the spacial resolution of identified mode shapes. The modal information identified from tests in several setups needs to be merged a posteriori. Algorithms to cope with this problem are also presented. Due to the fact that the amount of data generated in modal tests can become very large, manual processing can become extremely expensive or even impossible, for example in the case of a long-term continuous structural monitoring. In these situations an automated analysis and postprocessing are essential. Descriptions of respective methodologies are therefore also included in this work. Every structural system in civil engineering is unique and so also every identification of modal parameters has its specific challenges. Some aspects that can be faced in practical applications of operational modal analysis are presented and discussed in a chapter that is dedicated specific problems that an analyst may have to overcome. Case studies of systems with very close modes, with limited accessibility as well as the application of different OMA methods are described and discussed. In this context the focus is put on several types of uncertainty that may occur in the multiple stages of an operational modal analysis. In literature only very specific uncertainties at certain stages of the analysis are addressed. Here, the topic of uncertainties has been considered in a broader sense and approaches for treating respective problems are suggested. Eventually, it is concluded that the methodologies of operatinal modal analysis and related technical solutions have been well-engineered already. However, as in any discipline that includes experiments, a certain degree of uncertainty always remains in the results. From these conclusions has been derived a demand for further research and development that should be directed towards the minimisation of these uncertainties and to a respective optimisation of the steps and corresponding parameters included in an operational modal analysis. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,5 KW - Modalanalyse KW - Strukturdynamik KW - Operational modal analysis KW - modal analysis KW - structural dynamics Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191030-40061 ER - TY - THES A1 - Bendalla, Abdulmagid Sedig Khalafallah T1 - Nonlinear Numerical Modelling of Cable Elements in Bridges for Dynamic Analysis N2 - Identifying cable force with vibration-based methods has become widely used in engineering practice due to simplicity of application. The string taut theory provides a simple definition of the relationship between natural frequencies and the tension force of a cable. However, this theory assumes a perfectly flexible non-sagging cable pinned at its ends. These assumptions do not reflect all cases, especially when the cable is short, under low tension forces or the supports are partially flexible. Extradosed bridges, which are distinguished from cable-stayed bridges by their low pylon height, have shorter cables. Therefore the application of the conventional string taut theory to identify cable forces on extradosed bridge cables might be inadequate to identify cable forces. In this work, numerical modelling of an extradosed bridge cable saddled on a circular deviator at pylon is conducted. The model is validated with the catenary analytical solution and its static and dynamic behaviours are studied. The effect of a saddle support is found to positively affect the cable stiffness by geometric means; longer saddle radius increases the cable stiffness by suppressing the deformations near the saddle. Further, accounting the effects of bending stiffness in the numerical model by using beam elements show considerable deviation from models with truss elements (i.e. zero bending stiffness). This deviation is manifested when comparing the static and dynamic properties. This motivates a more thorough study of bending stiffness effects on short cables. Bending stiffness effects are studied using two rods connected with several springs along their length. Under bending moments, the springs resist the rods' relative axial displacement by the springs' transverse component. This concept is used to identify bending stiffness values by utilizing the parallel axis theorem to quantify ratios of the second moment of area. These ratios are calculated based on the setup of the springs (e.g. number of springs per unit length, transverse stiffness, etc...). The numerical model based on this concept agrees well with the theoretical values computed using upper and lower bounds of the parallel axis theorem. The proposed concept of quantifying ratios of the second moment of area using springs as connection between cable rods is applied on an actual extradosed bridge geometry. The model is examined by comparison to the previously validated global numerical model. The two models showed good correlation under various changing parameters. This allowed further study of the effects of stick/slip behaviour between cable rods on an actual bridge geometry. KW - Kabel KW - Nonlinear Cable Analysis KW - Bending Stiffness of cable elements KW - Biegesteifigkeit Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191007-39940 ER - TY - THES A1 - Shahraki, Mojtaba T1 - Numerical Analysis of Soil Behavior and Stone Columns Effects on the Railway Track N2 - Railway systems are highly competitive compared with other means of transportation because of their distinct advantages in speed, convenience and safety. Therefore, the demand for railway transportation is increasing around the world. Constructing railway tracks and related engineering structures in areas with loose or soft cohesive subgrade usually leads to problems, such as excessive settlement, deformation and instability. Several remedies have been proposed to avoid or reduce such problems, including the replacement of soft soil and the construction of piles or stone columns. This thesis aims to expand the geotechnical knowledge of how to improve subgrade ballasted railway tracks, using stone columns and numerical modeling for the railway infrastructure. Three aspects are considered: i) railway track dynamics modeling and validation by field measurements, ii) modeling and parametric studies on stone columns, and iii) studies on the linear and non-linear behavior of stone columns under the dynamic load of trains. The first step of this research was to develop a reliable numerical model of a railway track. The finite element method in a time domain was used for either a 2D plane strain or 3D analysis. Individual methods for modeling a train load in 2D and 3D were implemented and are discussed in this thesis. The developed loading method was validated with three different railway tracks using obtained vibration measurements. Later, these numerical models were used to analyze the influence of stone column length and train speed in the stress field. The performance of the treated ground depends on various parameters, such as the strength of stone columns, spacing, length and diameter of the columns. Therefore, the second step was devoted to a parameter study of stone columns as a unit cell with an axisymmetric condition. The results showed that even short stone columns were effective for settlement reduction, and area of replacement was the main influential parameter in their performance. The third part of this thesis focuses on a hypothetical railway-track response to the passage of various train speeds and the influence of stone-column length. The stress-strain response of subgrade is analyzed under either an elastic–perfectly plastic or advanced constitutive model. The non-linear soil response in the finite element method and the impact of train speed and stone column length on railway tracks are also evaluated. Moreover, the reductions of induced vibration – in both a horizontal and a vertical direction – after improvement are investigated. KW - Eisenbahn KW - Verkehrslast KW - Gleisanlage KW - Numerical KW - Railway KW - Stone Columns KW - Schottersäule KW - Gleisdynamik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191111-40159 ER -