TY - CHAP A1 - Karaki, Ghada A1 - Freundt, Ursula A1 - Vogt, Ralf ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MODELING OF BRIDGE BEARING UNDER TRANSIENT LOADING N2 - The evident advances of the computational power of the digital computers enable the modeling of the total system of structures. Such modeling demands compatible representations of the couplings of different structural subsystems. Therefore, models of dynamic interaction between the vehicle and the bridge and models of a bridge bearing, a coupling element between the bridge's superstructure and substructure, are of interest and discussed within this paper. The vehicle-bridge interaction may be described as a function connecting two sets of behavior. In this case, the coupling is embodied by mutual parameters that affect both systems, such as the frequency content of the bridge and the vehicle. Whereas the bridge bearings are elements used specifically to couple, in such elements the deformation and the transferred loads are used in characterizing the coupling The nature of these couplings and their influence on the bridge response is different. However, the need to assess the amount of dynamic response transferred by or within these couplings is a common argument. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28544 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Chudoba, Rostislav A1 - Scholzen, A. A1 - Hegger, Josef ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - MICROPLANE MODEL WITH INITIAL AND DAMAGE-INDUCED ANISOTROPY APPLIED TO TEXTILE-REINFORCED CONCRETE N2 - The presented material model reproduces the anisotropic characteristics of textile reinforced concrete in a smeared manner. This includes both the initial anisotropy introduced by the textile reinforcement, as well as the anisotropic damage evolution reflecting fine patterns of crack bridges. The model is based on the microplane approach. The direction-dependent representation of the material structure into oriented microplanes provides a flexible way to introduce the initial anisotropy. The microplanes oriented in a yarn direction are associated with modified damage laws that reflect the tension-stiffening effect due to the multiple cracking of the matrix along the yarn. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28367 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - THES A1 - Gondran Carvalho da Silva, Adriana T1 - Make-up Urbanism: the gap between promise and performance of Florianópolis (Brazil) N2 - In the last two decades, many cities have faced changes in their economic basis and therefore adopted an entrepreneurial approach in the municipal administration accompanied by city marketing strategies. Brazilian cities have also adopted this approach, like the case of Florianópolis. Florianópolis has promoted advertising campaigns on the natural resources of the Island of Santa Catarina as well as on its quality of life in comparison to other cities. However, due also to such campaigns, it has experienced a great demographic growth and, consequently, infrastructural and social problems. Nevertheless, it seems to have a good image within the national urban scenario and has been commonly considered an “urban consumption dream” for many Brazilians. This paradoxical situation is the reason why it has been chosen as the research object in this dissertation. Thus, the questions of this research are: is there a gap between the promise and the performance of the city of Florianópolis? If so, can tourists and residents recognize it? And finally, how can this gap be demonstrated? Accordingly, the main objective of this research is to propose a conformity assessment approach applicable to cities, by which the content of city advertisement campaigns can be compared to its performance indicators and satisfaction degree of its consumers. Therefore, this approach is composed by different methods: literature and legislation reviews, semi-structured and structured interviews with experts and inhabitants, an urban centrality development analysis, a qualitative discourse analysis of advertising material (including images), a qualitative content analysis of newspaper reports and a questionnaire survey. Finally, the theses are: yes, there is a gap between promise and performance of Florianópolis; this promise is a result of city marketing campaigns which advertise its natural features and at the same time hiding its urban aspects, supported by some political and private actors, mainly interested in the development of tourism and real estate market in the city; this gap has been already recognized by tourists and more intensively by residents; the selected methods worked as a kind of conformity assessment for cities and tourist destinations; and last but not least, since there is a gap, it designates the practice of “make-up urbanism”. Research limitations are the short time frame covered by this analysis and small and non-representative samples. However, its relevance lies in the attempt to fill in two disciplinary lacunas: a conformity assessment approach for cities and the creation of knowledge about Florianópolis and its further presentation at an international level, on the one hand. On the other hand, the transfer of this approach to other cities would help explaining a (common) contemporary urban phenomenon and appeal for more ethical conduct and transparency in the practices of city marketing. N2 - In den letzten zwei Jahrzehnten sahen sich viele Städte zunehmend einer Veränderung ihrer ökonomischen Basis ausgesetzt, was zum Aufgreifen unternehmerischer Ansätze mit Strategien des Stadtmarketings führte. Brasilianische Städte wie Florianópolis haben diesen Ansatz ebenfalls adaptiert, u.a. durch Werbekampagnen über die natürlichen Ressourcen der Insel Santa Catarina und eine höhere Lebensqualität. Diese trugen allerdings auch zu einem demografischen Wachstum mit begleitenden infrastrukturellen und sozialen Problemen bei. Dennoch scheint Florianópolis insgesamt ein gutes Image zu haben. Diese paradoxe Situation ist der Grund, weshalb die Stadt als Fallstudie für die vorliegende Dissertation ausgewählt wurde. Die Forschungsfragen sind deshalb folgende: Gibt es eine Diskrepanz zwischen dem Versprechen und der tatsächlichen Performanz der Stadt Florianópolis? Falls ja, können Touristen und Einwohner diese wahrnehmen? Der Hauptfokus liegt auf dem Erarbeiten einer auf Städte anwendbaren Konformitätsbewertung, durch die der Inhalt von städtischen Werbekampagnen mit ihren tatsächlichen Performanzindikatoren und dem Zufriedenheitsgrad ihrer Konsumenten verglichen werden kann. Der Ansatz basiert dabei auf mehreren Methoden: der Auswertung von Literatur und Gesetzen, halbstrukturierten und strukturierten Interviews mit Experten und Einwohnern der Stadt Florianópolis, einer Analyse über die Entwicklung der Stadtzentralität, der qualitativen Diskursanalyse von Werbematerial (inkl. Bildern), der qualitativen Inhaltsanalyse von Zeitungsartikeln sowie einer Umfrage mittels Fragebogen. Die Thesen sind dabei folgende: 1. Ja, es gibt eine Diskrepanz zwischen Versprechen und tatsächlicher Performanz der Stadt Florianópolis. 2. Dieses Versprechen ist das Resultat von Stadtmarketingkampagnen, welche ihre natürlichen Eigenschaften bewerben, dabei aber gleichzeitig urbane Aspekte verbergen. 3. Die ermittelte Diskrepanz wurde bereits von Touristen und Einwohnern wahrgenommen. 4. Die ausgewählten Methoden stellen eine Konformitätsbewertung für Städte und Touristenziele dar. 5. Da es eine Diskrepanz gibt, ist diese bestimmend für die Praxis einer ‚Make-up-Urbanistik‘. Als Forschungsgrenzen sind der enge analysierte Zeitraum sowie verhältnismäßig kleine und nicht repräsentative Beispiele zu benennen. Die Relevanz der vorliegenden Arbeit liegt jedoch in dem Versuch, zwei disziplinäre Leerräume zu füllen: Zum einen durch den Ansatz einer Konformitätsbewertung für Städte im Allgemeinen mit der Generierung von Wissen über Florianópolis im Besonderen sowie zum anderen durch den Vorschlag einer weiterführenden Übertragung dieses Ansatzes auf andere Städte, um ein allgemeines urbanes Phänomen dieser Zeit zu erklären und dadurch Anreize zu schaffen für mehr Ethik und Transparenz in der Praxis des Stadtmarketings. T2 - Make-up-Urbanistik: die Lücke zwischen das Versprechen und die Performanz von Florianópolis (Brasilien) KW - Stadtmarketing KW - Florianópolis KW - Brasilien KW - Konformitätsbewertung KW - Make-up-Urbanistik KW - City Marketing KW - Florianópolis KW - Brazil KW - Conformity Assessment KW - Make-up Urbanism Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110118-15317 ER - TY - THES A1 - Linne, Stefan T1 - Lösbare kraftschlüssige Verbindungen für modulare Bauwerke aus Faserverbundkunststoffen T1 - Solvable force-fit joining technology for modular structures made of fiber reinforced polymers N2 - In der vorliegenden Arbeit wird eine kraftschlüssige Verbindungstechnik für modulare, schalenartige Faserverbundbauteile vorgestellt. Die Verbindung basiert auf der Verklebung mit lokal begrenzten Stahlblechen. Aus dem Verbindungsansatz wird die Verklebung zwischen Stahl und Faserverbundkunststoff vertiefend betrachtet. Ziel sind die Wahl von technologischen Randbedingungen, die Erarbeitung eines Vorschlages zur numerischen Berechnung und Bemessung und die Formulierung konstruktiver Empfehlungen zum Entwurf von Verklebungen. Mechanische Kennwerte werden in Zugversuchen ermittelt und direkt auf die nichtlinearen Berechnungen übertragen. Technologische Einflüsse und die Streuungen aus realen Verklebungen werden über die Nachrechnung von Zugscherversuchen in die Bemessung integriert. Es wird gezeigt, dass die Verklebungen ausreichende Festigkeiten und ein zufriedenstellendes Bruchverhalten aufweisen. Die Kombination aus einer Werkstattverklebung und einer baustellengerechten Montage ermöglicht eine materialgerechte und effiziente Verbindungen für Faserverbundkonstruktionen unter den Randbedingungen des Bauwesens. N2 - In this thesis, a force-fit joining technology for modular, shell-like fiber reinforced polymer structures is presented. The connection is based on a local reinforcement with steel sheets with an adhesive bonding to the polymer. The focus of this work is to investigate the adhesive bonding between steel and fiber reinforced polymers. A general concept for the selection of technological constraints as well as suggestions for the numerical analysis and recommendations for the engineering design of the connections are developed. The mechanical properties are experimentally termined by tensile tests. These results were directly incorporated into the nonlinear numerical analysis. Parameters describing technological influences and the stochastic scatter of real bondings were integrated into the analysis by fitting numerical simulations with the experimental data. It is demonstrated that the bondings have a sufficient strength as well as a satisfactory fracture behavior. Furthermore, it is shown that the combination between an adhesive bonding realized off-site and a robust on-site assembly enables the construction of reliable and efficient joints that take into account the specific constraints on a construction site. KW - Verbindungstechnik KW - Kleben KW - Kunststoffkleben KW - Metallkleben KW - Fügen KW - Kraftschluss KW - Oberflächenvorbereitung KW - Zugversuch KW - Direkte numerische Simul KW - materialgerecht KW - modulares Bauwerk KW - lösbare Verbindung KW - Kraftschluss KW - Klebtechnologie KW - MFPA Weimar KW - fiber reinforced polymer KW - adhesive bonding KW - joining KW - force-fit KW - numeric analysis KW - finite element method KW - material properties KW - fracture behavior Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110831-15547 ER - TY - CHAP A1 - Bombasaro, Emanuel A1 - Bucher, Christian ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INVESTIGATION OF MODELING ERRORS OF DIFFERENT RANDOM FIELD BASED WIND LOAD FORMULATIONS N2 - In this paper the influence of changes in the mean wind velocity, the wind profile power-law coefficient, the drag coefficient of the terrain and the structural stiffness are investigated on different complex structural models. This paper gives a short introduction to wind profile models and to the approach by Davenport A. G. to compute the structural reaction of wind induced vibrations. Firstly with help of a simple example (a skyscraper) this approach is shown. Using this simple example gives the reader the possibility to study the variance differences when changing one of the above mentioned parameters on this very easy example and see the influence of different complex structural models on the result. Furthermore an approach for estimation of the needed discretization level is given. With the help of this knowledge the structural model design methodology can be base on deeper understanding of the different behavior of the single models. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28318 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Franssens, Ghislain R. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTRODUCTION TO CLIFFORD ANALYSIS OVER PSEUDO-EUCLIDEAN SPACE N2 - An introduction is given to Clifford Analysis over pseudo-Euclidean space of arbitrary signature, called for short Ultrahyperbolic Clifford Analysis (UCA). UCA is regarded as a function theory of Clifford-valued functions, satisfying a first order partial differential equation involving a vector-valued differential operator, called a Dirac operator. The formulation of UCA presented here pays special attention to its geometrical setting. This permits to identify tensors which qualify as geometrically invariant Dirac operators and to take a position on the naturalness of contravariant and covariant versions of such a theory. In addition, a formal method is described to construct the general solution to the aforementioned equation in the context of covariant UCA. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28433 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - THES A1 - Theiler, Michael T1 - Interaktive Visualisierung von Qualitätsdefiziten komplexer Bauwerksinformationsmodelle auf Basis der Industry Foundation Classes (IFC) in einer webbasierten Umgebung N2 - Der inhaltlichen Qualitätssicherung von Bauwerksinformationsmodellen (BIM) kommt im Zuge einer stetig wachsenden Nutzung der verwendeten BIM für unterschiedliche Anwen-dungsfälle eine große Bedeutung zu. Diese ist für jede am Datenaustausch beteiligte Software dem Projektziel entsprechend durchzuführen. Mit den Industry Foundation Classes (IFC) steht ein etabliertes Format für die Beschreibung und den Austausch eines solchen Modells zur Verfügung. Für den Prozess der Qualitätssicherung wird eine serverbasierte Testumgebung Bestandteil des neuen Zertifizierungsverfahrens der IFC sein. Zu diesem Zweck wurde durch das „iabi - Institut für angewandte Bauinformatik” in Zusammenarbeit mit „buildingSMART e.V.“ (http://www.buildingsmart.de) ein Global Testing Documentation Server (GTDS) implementiert. Der GTDS ist eine, auf einer Datenbank basierte, Web-Applikation, die folgende Intentionen verfolgt: • Bereitstellung eines Werkzeugs für das qualitative Testen IFC-basierter Modelle • Unterstützung der Kommunikation zwischen IFC Entwicklern und Anwendern • Dokumentation der Qualität von IFC-basierten Softwareanwendungen • Bereitstellung einer Plattform für die Zertifizierung von IFC Anwendungen Gegenstand der Arbeit ist die Planung und exemplarische Umsetzung eines Werkzeugs zur interaktiven Visualisierung von Qualitätsdefiziten, die vom GTDS im Modell erkannt wurden. Die exemplarische Umsetzung soll dabei aufbauend auf den OPEN IFC TOOLS (http://www.openifctools.org) erfolgen. KW - BIM KW - IFC KW - GTDS KW - Visualisierung KW - BIM KW - IFC KW - GTDS KW - Visualisierung Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121214-17869 ER - TY - CHAP A1 - Brackx, Fred A1 - De Schepper, Hennie A1 - Luna-Elizararras, Maria Elena A1 - Shapiro, Michael ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INTEGRAL REPRESENTATIONS IN HERMITEAN CLIFFORD ANALYSIS N2 - Euclidean Clifford analysis is a higher dimensional function theory offering a refinement of classical harmonic analysis. The theory is centered around the concept of monogenic functions, i.e. null solutions of a first order vector valued rotation invariant differential operator called the Dirac operator, which factorizes the Laplacian. More recently, Hermitean Clifford analysis has emerged as a new and successful branch of Clifford analysis, offering yet a refinement of the Euclidean case; it focusses on the simultaneous null solutions, called Hermitean (or h-) monogenic functions, of two Hermitean Dirac operators which are invariant under the action of the unitary group. In Euclidean Clifford analysis, the Clifford-Cauchy integral formula has proven to be a corner stone of the function theory, as is the case for the traditional Cauchy formula for holomorphic functions in the complex plane. Previously, a Hermitean Clifford-Cauchy integral formula has been established by means of a matrix approach. This formula reduces to the traditional Martinelli-Bochner formula for holomorphic functions of several complex variables when taking functions with values in an appropriate part of complex spinor space. This means that the theory of Hermitean monogenic functions should encompass also other results of several variable complex analysis as special cases. At present we will elaborate further on the obtained results and refine them, considering fundamental solutions, Borel-Pompeiu representations and the Teoderescu inversion, each of them being developed at different levels, including the global level, handling vector variables, vector differential operators and the Clifford geometric product as well as the blade level were variables and differential operators act by means of the dot and wedge products. A rich world of results reveals itself, indeed including well-known formulae from the theory of several complex variables. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28326 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Nikulla, Susanne ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - INFLUENCE OF THE ABSTRACTION LEVEL IN KINEMATICAL MODELS OF FINITE ELEMENT FORMULATIONS N2 - Nonlinear analyses are characterised by approximations of the fundamental equations in different quality. Starting with a general description of nonlinear finite element formulation the fundamental equations are derived for plane truss elements. Special emphasis is placed on the determination of internal and external system energy as well as influence of different quality approaches for the displacement-strain relationship on solution quality. To simplify the solution procedure the nonlinear function describing the kinematics is expanded into a Taylor series and truncated after the n-th series term. The different kinematics influence speed of convergence as well as exactness of solution. On a simple truss structure this influence is shown. To assess the quality of different formulations concerning the nonlinear kinematic equation three approaches are discussed. First the overall internal and external energy is compared for different kinematical models. In a second step the energy content related to single terms describing displacement-strain relationship is investigated and used for quality control following two different paths. Based on single ε-terms an adaptive scheme is used to change the kinematical model depending on increasing nonlinearity of the structure. The solution quality has turned out satisfactory compared to the exact result. More detailed investigations are necessary to find criteria for the threshold values for the iterative process as well as for decision on number and step size of incremental load steps. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28780 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Gokce, Hasan Ufuk A1 - Browne, Donal A1 - Gokce, Kamil Umut A1 - Menzel, Karsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - IMPROVING ENERGY EFFICIENT OPERATION OF BUILDINGS WITH WIRELESS IT SYSTEMS N2 - Reducing energy consumption is one of the major challenges for present day and will continue for future generations. The emerging EU directives relating to energy (EU EPBD and the EU Directive on Emissions Trading) now place demands on building owners to rate the energy performance of their buildings for efficient energy management. Moreover European Legislation (Directive 2006/32/EC) requires Facility Managers to reduce building energy consumption and operational costs. Currently sophisticated building services systems are available integrating off-the-shelf building management components. However this ad-hoc combination presents many difficulties to building owners in the management and upgrade of these systems. This paper addresses the need for integration concepts, holistic monitoring and analysis methodologies, life-cycle oriented decision support and sophisticated control strategies through the seamless integration of people, ICT-devices and computational resources via introducing the newly developed integrated system architecture. The first concept was applied to a residential building and the results were elaborated to improve current building conditions. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28453 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - THES A1 - Nolde, Hendrik T1 - Imagebildung in Gebieten des Programms „Soziale Stadt“ am Beispiel von Jena-Winzerla T1 - The Image of areas in the program "Soziale Stadt" using the example of Jena-Winzerla N2 - Das Bund-Länder-Programm "Soziale Stadt" hat die Aufgabe, Stadtteile mit besonderem Entwicklungsbedarf zu fördern. Das negative Image ist einerseits Ursache, andererseits auch Folge von sozialen und städtebaulichen Problemlagen und Entwicklungen im Stadtteil. Diese Abwärtsspirale soll durch das Programm aufgebrochen werden. Der Autor nähert sich interdisziplinär dem Imagebegriff an und zeigt die Auswirkungen des Programms "Soziale Stadt" auf die Großwohnsiedlung Jena-Winzerla. Die Studie erfasst anhand des semantischen Differentials das Image im Stadtteil, wie es von den Bewohnern beurteilt wird und vergleicht es mit der Sicht von Außen. Der Einfluß des Programms auf das Image wird durch Experteninterviews beleuchtet. Das Beispiel eigt die Entwicklungen, die das Programm "Soziale Stadt" bewirken kann. Es werden aber auch Grenzen deutlich. Vor diesem Hintergrund werden abschließend Überlegungen angestellt, in welche Richtungen die Entwicklungen innerhalb des Förderprogramms gelenkt werden sollten, um das Image nachhaltig zu verbessern und betroffene Stadtteile adäquat zu fördern. N2 - The program "Soziale Stadt" aims to support deprived areas in cities. The negative image of these areas is on the one hand cause and on the other hand effect of social problems and town planning deficits. This downward spiral should be stopped by the program. The author uses a multidisciplinary approch to the term image and shows the effect of the program "Soziale Stadt" on Jena-Winzerla an estate of prefabricated houses. The studie uses a semantic differential to survey the self-image and the image of Winzerla from outside. The influence of the program on the image is evaluated by expert interviews. The example shows the possibilities and borders of the program "Soziale Stadt". On this background relflections were done about the focus of the program in order to improve the image and promote deprived areas adequately. KW - Soziale Stadt KW - Jena-Winzerla KW - Jena-Winzerla / Stadtteilbüro Winzerla KW - Image KW - Trabantenstadt KW - Polaritätsprofil KW - Großtafelbau Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110218-15351 SN - 978-3-639-32687-1 N1 - Nolde, Hendrik (2011) : Imagebildung in "Soziale Stadt" Gebieten. vdm-Verlag, Saarbrücken. ER - TY - CHAP A1 - Lahmer, Tom ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - HYDRO-MECHANICAL COUPLED FIELD SYSTEM IDENTIFICATION - APPLICATION TO WATER RESERVOIRS N2 - In this paper we present an inverse method which is capable of identifying system components in a hydro-mechanically coupled system, i.e. for fluid flow in porous media. As an example we regard water dams that were constructed more than hundred years ago but which are still in use. Over the time ageing processes have changed the condition of these dams. Within the dams fissures might have grown. The proposed method is designed to locate these fissures out of combined mechanical and hydraulic measurements. In a numerical example the fissures or damaged zones are described by a smeared crack model. The task is now to identify simultaneously the spatial distribution of Young’s modulus and the hydraulic permeability due to the fact, that in regions where damages are present, the mechanical stiffness of the system is reduced and the permeability increased. The inversion is shown to be an ill-posed problem. As a consequence regularizing methods have to be applied, where the nonlinear Landweber method (a gradient type method combined with a discrepancy principle) has proven to be an efficient choice. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28650 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - THES A1 - Henning, Victor T1 - Hedonic Consumer Decision Making And Implications For The Marketing Of Media Goods N2 - This cumulative dissertation investigates aspects of consumer decision making in hedonic contexts and its implications for the marketing of media goods through a series of three empirical studies. All three studies take place within a common theoretical framework of decision making models, applying parts of the framework in novel ways to solve real-world marketing research problems (study 1 and 2), and examining theoretical relationships between variables within of the framework (study 3). One notable way in which the studies differ is their theoretical treatment of the hedonic component of decision making, i.e. the role and conceptualization of emotions. N2 - Die vorliegende kumulative Dissertation untersucht anhand von drei empirischen Studien Entscheidungsverhalten im Kontext des Hedonischen Konsums und dessen Implikationen für das Marketing von Mediengütern. Hedonischer Konsumer ist definiert als die Facette des Konsumentenverhaltens, die sich auf „multisensorische, fantastische und emotionale Aspekte der Produktnutzung“ bezieht. Alle drei Studien sind weitgehend in den theoretischen Bezugsrahmen des „Information Processing View“ eingebettet, der Konsumenten als begrenzt rationale Nutzenmaximierer beschreibt. Die Kapitel 1 und 2 dieser Dissertation wenden Teile der Information Processing View-Theorie in neuartiger Weise auf aktuelle Probleme der Marketing-Forschung und der Filmindustrie an, während Kapitel 3 den Information Processing View systematisch um emotionale Aspekte des Entscheidungsverhaltens ergänzt und die theoretischen Beziehungen der Modellvariablen untereinander erforscht. T2 - Hedonisches Konsum-Entscheidungsverhalten und Implikationen für das Marketing von Mediengütern KW - Gefühl KW - Entscheidungsverhalten KW - Verbraucherverhalten KW - Marketing KW - Emotion KW - Decision Making KW - Hedonic Consumption KW - Marketing KW - Media Goods Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20101214-15290 ER - TY - CHAP A1 - Ahmed El-Sayed, Ahmed A1 - Rashwan, R. A. A1 - Kamal, A. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - HADAMARD GAPS IN WEIGHTED LOGARITHMIC BLOCH SPACE N2 - We give a sufficient and a necessary condition for an analytic function "f" on the unit disk "D" with Hadamard gap to belong to a class of weighted logarithmic Bloch space as well as to the corresponding little weighted logarithmic Bloch space under some conditions posed on the defined weight function. Also, we study the relations between the class of weighted logarithmic Bloch functions and some other classes of analytic functions by the help of analytic functions in the Hadamard gap class. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28275 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - JOUR A1 - König, Reinhard T1 - Generative Planungsmethoden aus strukturalistischer Perspektive T1 - Generative planning methods from a structuralist perspective N2 - Nähert man sich der Frage nach den Zusammenhängen zwischen Strukturalismus und generativen algorithmischen Planungsmethoden, so ist zunächst zu klären, was man unter Strukturalismus in der Architektur versteht. Allerdings gibt es letztlich keinen verbindlichen terminologischen Rahmen, innerhalb dessen sich eine solche Klärung vollziehen könnte. Strukturalismus in der Architektur wird oftmals auf ein formales Phänomen und damit auf eine Stilfrage reduziert. Der vorliegende Text will sich nicht mit Stilen und Phänomenen strukturalistischer Architektur auseinandersetzen, sondern konzentriert sich auf die Betrachtung strukturalistischer Entwurfsmethoden und stellt Bezüge her zu algorithmischen Verfahren, wobei das Zusammenspiel zwischen regelgeleitetem und intuitivem Vorgehen beim Entwerfen herausgearbeitet wird. N2 - When considering the question of a relationship between structuralism and generative algorithmic planning methods, we first need to clarify what we mean by structuralism in architecture. There is, unfortunately, no clearly defined terminological framework to aid clarification. Structuralism in architecture is often regarded as formal phenomena and accordingly reduced to stylistic aspects. The following essay is not about the styles and manifestation of structuralism in architecture but instead concentrates on examining structuralist design methods and their relationship and relevance for algorithmic techniques, with particular emphasis on the interaction between rule-based and intuitive approaches in the design process. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 1 KW - Strukturalismus KW - CAD KW - Generative Entwurfsmethoden KW - computerbasiertes Entwerfen KW - Planungstheorie Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:101:1-201105114205 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - CHAP A1 - Musial, Michal A1 - Kaminski, Mieczysław A1 - Ubysz, Andrzej ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - FREE VIBRATION FREQUENCIES OF THE CRACKED REINFORCED CONCRETE BEAMS - METHODS OF CALCULATIONS N2 - The paper presents method of calculation of natural frequencies of the cracked reinforced concrete beams including discreet model of crack. The described method is based on the stiff finite elements method. It was modified in such a way as to take into account local discontinuities (ie. cracks). In addition, some theoretical studies as well as experimental tests of concrete mechanics based on discrete crack model were taken into consideration. The calculations were performed using the author’s own numerical algorithm. Moreover, other calculation methods of dynamic reinforced concrete beams presented in standards and guidelines are discussed. Calculations performed by using different methods are compared with the results obtained in experimental tests. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28744 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Häfner, Stefan A1 - Vogel, Frank A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - FINITE ELEMENT ANALYSIS OF TORSION FOR ARBITRARY CROSS-SECTIONS N2 - The present article proposes an alternative way to compute the torsional stiffness based on three-dimensional continuum mechanics instead of applying a specific theory of torsion. A thin, representative beam slice is discretized by solid finite elements. Adequate boundary conditions and coupling conditions are integrated into the numerical model to obtain a proper answer on the torsion behaviour, thus on shear center, shear stress and torsional stiffness. This finite element approach only includes general assumptions of beam torsion which are independent of cross-section geometry. These assumptions essentially are: no in-plane deformation, constant torsion and free warping. Thus it is possible to achieve numerical solutions of high accuracy for arbitrary cross-sections. Due to the direct link to three-dimensional continuum mechanics, it is possible to extend the range of torsion analysis to sections which are composed of different materials or even to heterogeneous beams on a high scale of resolution. A brief study follows to validate the implementation and results are compared to analytical solutions. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28483 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Reuter, Markus ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - EVALUATION OF THE ANALYSIS METHOD FOR THE DESIGN OF FRAME STRUCTURES N2 - By the use of numerical methods and the rapid development of computer technology in the recent years, a large variety, complexity, refinement and capability of partial models have been achieved. This can be noticed in the evaluation of the reliability of structures, e.g. the increased use of spatial structural systems. For the different fields of civil engineering, well developed partial models already exist. Because these partial models are most often used separately, the general view is not entirely illustrated. Until now, there has been no common methodology for evaluating the efficiency of models; the trust in the prediction of a special engineering model has generally relied on the engineer’s experience. In this paper the basics of evaluation of simple models and coupled partial models of frame structures will be discussed using sustainable numerical methods. Furthermore, quality classes (levels) of design tasks will be defined based on their practical relevance. In addition, analysis methods will be systemized. After analysis of different published assessment methods, it may be noted, that the Efficiency Indicator Method (EWM) is most suitable for the observed evaluation problem. Therefore, the EWM was modified to the Model Efficiency Analysis (MEA) for the purpose of a holistic evaluation. The criteria are characterized by two groups, benefit and expenditure, and it is possible by calculating the quotient (benefit/expenditure) to make a statement about the efficiency of the observed models. Presently, the expenditure value is not a subject of investigation, and so the model efficiency is calculated only by the benefit value. This paper also contains the associated criteria catalog, different normalization methods, as well as weighting possibilities. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28823 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Most, Thomas ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ESTIMATING UNCERTAINTIES FROM INACCURATE MEASUREMENT DATA USING MAXIMUM ENTROPY DISTRIBUTIONS N2 - Modern engineering design often considers uncertainties in geometrical and material parameters and in the loading conditions. Based on initial assumptions on the stochastic properties as mean values, standard deviations and the distribution functions of these uncertain parameters a probabilistic analysis is carried out. In many application fields probabilities of the exceedance of failure criteria are computed. The out-coming failure probability is strongly dependent on the initial assumptions on the random variable properties. Measurements are always more or less inaccurate data due to varying environmental conditions during the measurement procedure. Furthermore the estimation of stochastic properties from a limited number of realisation also causes uncertainties in these quantities. Thus the assumption of exactly known stochastic properties by neglecting these uncertainties may not lead to very useful probabilistic measures in a design process. In this paper we assume the stochastic properties of a random variable as uncertain quantities caused by so-called epistemic uncertainties. Instead of predefined distribution types we use the maximum entropy distribution which enables the description of a wide range of distribution functions based on the first four stochastic moments. These moments are taken again as random variables to model the epistemic scatter in the stochastic assumptions. The main point of this paper is the discussion on the estimation of these uncertain stochastic properties based on inaccurate measurements. We investigate the bootstrap algorithm for its applicability to quantify the uncertainties in the stochastic properties considering imprecise measurement data. Based on the obtained estimates we apply standard stochastic analysis on a simple example to demonstrate the difference and the necessity of the proposed approach. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28732 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Eckardt, Stefan A1 - Könke, Carsten ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - ENERGY RELEASE CONTROL FOR NONLINEAR MESOSCALE SIMULATIONS N2 - In nonlinear simulations the loading is, in general, applied in an incremental way. Path-following algorithms are used to trace the equilibrium path during the failure process. Standard displacement controlled solution strategies fail if snap-back phenomena occur. In this contribution, a path-following algorithm based on the dissipation of the inelastic energy is presented which allows for the simulation of snap-backs. Since the constraint is defined in terms of the internal energy, the algorithm is not restricted to continuum damage models. Furthermore, no a priori knowledge about the final damage distribution is required. The performance of the proposed algorithm is illustrated using nonlinear mesoscale simulations. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28414 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER -