TY - THES A1 - Lenz, Juliane T1 - „Bausünde“ oder Denkmal? Zur Diskussion über den Umgang mit verschmähten Bauwerken N2 - Für die einen also „Bausünde“, für die anderen ein erhaltenswertes Bauwerk – wie geht man damit um? Für wen gilt wann etwas als „Bausünde“ und wann als erhaltenswert, welche Ziele werden damit verfolgt und Konzepte aufgezeigt? Inwieweit spielen beispielsweise Aspekte wie Ästhetik, Funktionalität oder der allgemeine gesellschaftliche Kontext bzw. Wandel sowie das jeweils aktuelle und bauzeitliche planerische Leitbild bzw. Verständnis eine Rolle bei der Verwendung des Begriffs und den Umgang für konkrete Bauwerke? Und inwieweit steht der Erhaltungswert bzw. eine Denkmalwürdigkeit damit im Verhältnis und wie kann damit planerisch umgegangen werden? Der Diskussion über den Umgang mit verschmähten Bauwerken will sich die vorliegende Abschlussarbeit nähern. Als Bauwerke werden hierbei sowohl Gebäude und Plätze als auch zur Erinnerung gesetzte Objekte wie Statuen verstanden. T3 - IfEU.OPEN - 5 KW - Denkmalpflege KW - Denkmal Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230606-63979 ER - TY - RPRT A1 - Bockelmann, Leo A1 - Frölich-Kulik, Maria T1 - Vogtland – Industriekultur und Zukunft. Perspektiven zum Umgang mit dem industriekulturellen Erbe im Vogtland N2 - Die Broschüre gibt einen Überblick über die angewandten Zugänge und erarbeiteten Ergebnisse aus dem interdisziplinären Forschungsprojekt „Zukunftsindex Heimat und Baukultur 2025" der Professuren Denkmalpflege und Baugeschichte, Landschaftsarchitektur /-planung sowie Sozialwissenschaftliche Stadtforschung, durchgeführt 2021-2023 am Institut für Europäische Urbanistik (IfEU) der Bauhaus Universität Weimar. T3 - IfEU.OPEN - 6 KW - Industriekultur KW - Wahrnehmung KW - Regionalentwicklung KW - Vogtland Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230815-64140 ER - TY - INPR A1 - Fischer, Jens A1 - Schwendner, Sascha A1 - Seim, Werner A1 - Engelmann, Iris T1 - Verbindungen mit Nägeln im Holzbau – Die Erforschung und Entwicklung von Konstruktionsregeln N2 - Der Nagel als tragendes Holzverbindungsmittel ist heute gut bekannt. Doch noch vor 100 Jahren war das anders: sein statisch konstruktiver Gebrauch war verboten. Das änderte sich mit Beginn dessen Erforschung Ende der 1920er Jahre. Seit 1933 ist der Nagel Bestandteil der deutschen Regelwerke und findet seitdem breite Verwendung. Über weite Teile des 20. Jahrhunderts diente er in Not- und Sparkonstruktionen wie Brett- und Bohlenbindern als hocheffizientes Verbindungsmittel der Wahl. Diese materialsparenden Tragwerke waren bei der periodisch im-mer wiederkehrenden Ressourcenknappheit sehr gefragt und sind ein wichtiger Bestandteil der Konstruktionsgeschichte des Holzbaus. In dem folgenden Beitrag wird die Erforschung des Na-geltragverhaltens und die einhergehende fortlaufende Normierung behandelt. Die Errungen-schaften einzelner Forschungsvorhaben werden vorgestellt. Anhand eines Zeitstrahls werden Zusammenhänge zwischen Forschung und Normung gezeigt. Tabellen und Grafiken verdeutli-chen die Änderungen innerhalb der Normen von der ersten DIN 1052 im Jahr 1933 über die erste eigenständige Holzbaunorm in der DDR, der TGL 112-0730, aus 1963 bis zur DIN 1052- 1988. Dabei wird immer Bezug zum derzeitigen Entwurf des Eurocode 5 genommen. Allgemein zeigt sich, dass ein Großteil der heutigen Kenntnisse immer noch auf die Grundlagenforschung der 1930er Jahre zurückgeht. N2 - The nail as a load-bearing timber fastener is well known today. But 100 years ago, it was different: its structural use was not allowed. This changed with the beginning of systematical research at the end of the 1920s. Since 1933, the nail has been part of the German regulations and has been widely used ever since. For much of the 20th century, it served as the highly efficient fastener of choice especially in roof structures such as board and plank trusses. These material-saving load-bearing structural elements were always in demand due to the periodically recurring scarcity of material resources and are an important part in con-struction history. The following article deals with the research of the load-bearing behaviour of nails and the standardisation that has constantly accompanied it. The achievements of individual research projects are presented. A timeline shows the connections between research and standardisation. Tables and graphics illustrate the changes within the standards from the first DIN 1052 in 1933 to the first independent timber construction standard in the DDR, TGL 112-0730, from 1963 to DIN 1052-1988. Reference is al-ways made to the Eurocode 5 valid today. In general, it can be seen that a large part of today's knowledge still goes back to the basic research of the 1930s. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48893 N1 - This is the pre-peer reviewed version. ER - TY - GEN A1 - Eckardt, Frank A1 - AlSadaty, Aliaa T1 - Urban Heritage in Transformation: Physical and Non-Physical Dimensions of Changing Contexts T2 - Urban Planning N2 - Urban heritage is at the core of the process of many changes observable in the cities today. The pace of urban change in heritage contexts, however, differs widely across the globe. In some areas, it goes slowly, in others it is astonishingly rapid. In some cases, change is coupled with risks of erosion of heritage and urban areas of value and in others change is synonymous with prosperity and positive impacts. Change in urban heritage areas is not only confined to the physical and tangible aspects, but needs to be regarded as mirroring changes related socio-political practices, economic implications, and cultural impacts. In this regard, the present thematic issue looks at various patterns of the interrelationship between heritage and urban change from both the physical and the non-physical perspectives. This editorial presents the topic of urban heritage and patterns of physical and non-physical transformation in urban heritage contexts and introduces the thematic issue “Urban Heritage and Patterns of Change: Spatial Practices of Physical and Non-Physical Transformation.” KW - Stadt KW - Kulturerbe KW - urban heritage KW - non-physical transformation KW - physical transformation KW - patterns of change KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63850 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6633 VL - 2023 IS - Volume 8, No. 1 PB - Cogitatio Press CY - Lissabon ER - TY - JOUR A1 - Sander, Hendrik A1 - Weißermel, Sören T1 - Urban Heat Transition in Berlin: Corporate Strategies, Political Conflicts, and Just Solutions JF - Urban Planning N2 - In the field of urban climate policy, heat production and demand are key sectors for achieving a sustainable city. Heat production has to shift from fossil to renewable energies, and the heat demand of most buildings has to be reduced significantly via building retrofits. However, analyses of heat transition still lack its contextualization within entangled urban politico-economic processes and materialities and require critical socio-theoretical examination. Asking about the embeddedness of heat transition within social relations and its implications for social justice issues, this article discusses the challenges and opportunities of heat transition, taking Berlin as an example. It uses an urban political ecology perspective to analyze the materialities of Berlin’s heating-housing nexus, its politico-economic context, implications for relations of inequality and power, and its contested strategies. The empirical analysis identifies major disputes about the future trajectory of heat production and about the distribution of retrofit costs. Using our conceptual approach, we discuss these empirical findings against the idea of a more just heat transition. For this purpose, we discuss three policy proposals regarding cost distribution, urban heat planning, and remunicipalization of heat utilities. We argue that this conceptual approach provides huge benefits for debates around heat transition and, more generally, energy justice and just transitions. KW - Berlin KW - Stadtplanung KW - Ökologie KW - energy justice KW - energy retrofitting KW - green gentrification KW - low-carbon policy KW - urban political ecology KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63845 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6178 VL - 2023 IS - Volume 8, No 1 SP - 361 EP - 371 PB - Cogitatio Press CY - Lissabon ER - TY - THES A1 - Remus, Ricardo T1 - Ultraschallgestützte Betonherstellung. Konzept für eine ressourcenschonende Betonproduktion N2 - Aktuell findet aufgrund gesellschaftspolitischer Forderungen in vielen Industriezweigen ein Umdenken in Richtung Effizienz und Ökologie aber auch Digitalisierung und Industrie 4.0 statt. In dieser Hinsicht steht die Bauindustrie, im Vergleich zu Industrien wie IT, Automobil- oder Maschinenbau, noch am Anfang. Dabei sind die Potentiale zur Einsparung und Optimierung gerade in der Bauindustrie aufgrund der großen Mengen an zu verarbeiteten Materialien besonders hoch. Die internationale Ressourcen- und Klimadebatte führt verstärkt dazu, dass auch in der Zement- und Betonherstellung neue Konzepte erstellt und geprüft werden. Einerseits erfolgt intensive Forschung und Entwicklung im Bereich alternativer, klimafreundlicher Zemente. Andererseits werden auch auf Seiten der Betonherstellung innovative materialsparende Konzepte geprüft, wie die aktuelle Entwicklung von 3D-Druck mit Beton zeigt. Aufgrund der hohen Anforderungen an Konstruktion, Qualität und Langlebigkeit von Bauwerken, besitzen Betonfertigteile oftmals Vorteile gegenüber Ortbeton. Die hohe Oberflächenqualität und Dauerhaftigkeit aber auch die Gleichmäßigkeit und witterungsunabhängige Herstellung sind Merkmale, die im Zusammenhang mit Betonfertigteilen immer wieder erwähnt werden. Dabei ist es essenziell, dass auch der Betonherstellungsprozess im Fertigteilwerk kritisch hinterfragt wird, damit eine effizientere und nachhaltigere Produktion von Betonfertigteilen möglich wird. Bei der Herstellung von Betonteilen im Fertigteilwerk liegt ein besonderer Fokus auf der Optimierung der Frühfestigkeitsentwicklung. Hohe Frühfestigkeiten sind Voraussetzung für einen hochfrequenten Schalungszyklus, was Arbeiten im 2- bzw. 3-Schichtbetrieb ermöglicht. Oft werden zur Sicherstellung hoher Frühfestigkeiten hochreaktive Zemente in Kombination mit hohen Zementgehalten im Beton und/oder einer Wärmebehandlung eingesetzt. Unter dieser Prämisse ist eine ökologisch nachhaltige Betonproduktion mit verminderter CO2 Bilanz nicht möglich. In der vorliegenden Arbeit wird ein neues Verfahren zur Beschleunigung von Beton eingeführt. Hierbei werden die Bestandteile Zement und Wasser (Zementsuspension) mit Ultraschall vorbehandelt. Ausgangspunkt der Arbeit sind vorangegangene Untersuchungen zum Einfluss von Ultraschall auf die Hydration von Zement bzw. dessen Hauptbestandteil Tricalciumsilikat (C3S), die im Rahmen dieser Arbeit weiter vertieft werden. Darüber hinaus wird die Produktion von Beton mit Ultraschall im Technikumsmaßstab betrachtet. Die so erlangten Erfahrungen dienten dazu, das Ultraschall-Betonmischsystem weiterzuentwickeln und erstmalig zur industriellen Betonproduktion zu nutzen. In der vorliegenden Arbeit werden die Auswirkungen von Ultraschall auf die Hydratation von C3S zunächst weitergehend und grundlegend untersucht. Dies erfolgte mittels Messung der elektrischen Leitfähigkeit, Analyse der Ionenkonzentration (ICP-OES), Thermoanalyse, Messung der BET-Oberfläche sowie einer optischen Auswertung mittels Rasterelektronenmikroskopie (REM). Der Fokus liegt auf den ersten Stunden der Hydratation, also der Zeit, die durch die Ultraschallbehandlung am stärksten beeinflusst wird. In den Untersuchungen zeigt sich, dass die Beschleunigungswirkung von Ultraschall in verdünnten C3S Suspensionen (w/f-Wert = 50) stark von der Portlanditkonzentration der Lösung abhängt. Je niedriger die Portlanditkonzentration, desto größer ist die Beschleunigung. Ergänzende Untersuchungen der Ionenkonzentration der Lösung sowie Untersuchungen am hydratisierten C3S zeigen, dass unmittelbar nach der Beschallung (nach ca. 15 Minuten Hydratation) erste Hydratphasen vorliegen. Die durch Ultraschall initiiere Beschleunigung ist in den ersten 24 Stunden am stärksten und klingt dann sukzessive ab. Die Untersuchungen schließen mit Experimenten an C3S-Pasten (w/f-Wert = 0,50), die die Beobachtungen an den verdünnten Suspensionen bestätigen und infolge der Beschallung ein früheres Auftreten und einen größeren Anteil an C-S-H Phasen zeigen. Es wird gefolgert, dass die unmittelbar infolge von Ultraschall erzeugten C-S-H Phasen als Kristallisationskeim während der folgenden Reaktion dienen und daher Ultraschall als in-situ Keimbildungstechnik angesehen werden kann. Optisch zeigt sich, dass die C-S-H Phasen der beschallten Pasten nicht nur viel früher auftreten, sondern kleiner sind und fein verteilt über die Oberfläche des C3S vorliegen. Auch dieser Effekt wird als vorteilhaft für den sich anschließenden regulären Strukturaufbau angesehen. Im nächsten Schritt wird daher der Untersuchungsfokus vom Modellsystem mit C3S auf Portlandzement erweitert. Hierbei wird der Frage nachgegangen, wie sich eine Änderung der Zusammensetzung der Zementsuspension (w/z-Wert, Fließmittelmenge) beziehungsweise eine Änderung des Ultraschallenergieeintrag auf die Fließeigenschaften und das Erhärtungsverhalten auswirken. Um den Einfluss verschiedener Faktoren gleichzeitig zu betrachten, werden mit Hilfe von statistischen Versuchsplänen Modelle erstellt, die das Verhalten der einzelnen Faktoren beschreiben. Zur Beschreibung der Fließeigenschaften wurde das Setzfließ- und Ausbreitmaß von Zementsuspensionen herangezogen. Die Beschleunigung der Erhärtung wurde mit Hilfe der Ermittlung des Zeitpunkts des normalen Erstarrens der Zementsuspension bestimmt. Die Ergebnisse dieser Untersuchungen zeigen deutlich, dass die Fließeigenschaften und der Erstarrungsbeginn nicht linear mit steigendem Ultraschall-Energieeintrag verändert werden. Es zeigt sich, dass es besonders bei den Verarbeitungseigenschaften der Portlandzementsuspensionen zur Ausbildung eines spezifischen Energieeintrages kommt, bis zu welchem das Setzfließ- und das Ausbreitmaß erhöht werden. Bei Überschreiten dieses Punktes, der als kritischer Energieeintrag definiert wurde, nimmt das Setzfließ- und Ausbreitmaß wieder ab. Das Auftreten dieses Punktes ist im besonderen Maße abhängig vom w/z-Wert. Mit sinkendem w/z-Wert wird der Energieeintrag, der eine Verbesserung der Fließeigenschaften hervorruft, reduziert. Bei sehr niedrigen w/z-Werten (< 0,35), kann keine Verbesserung mehr beobachtet werden. Wird Fließmittel vor der Beschallung zur Zementsuspension zugegeben, können die Eigenschaften der Zementsuspension maßgeblich beeinflusst werden. In beschallten Suspensionen mit Fließmittel, konnte in Abhängigkeit des Energieeintrages die fließmittelbedingte Verzögerung des Erstarrungsbeginns deutlich reduziert werden. Weiterhin zeigt sich, dass der Energieeintrag, der notwendig ist um den Erstarrungsbeginn um einen festen Betrag zu reduzieren, bei Suspensionen mit Fließmittel deutlich reduziert ist. Auf Grundlage der Beobachtungen an Zementsuspensionen wird der Einfluss von Ultraschall in einen dispergierenden und einen beschleunigenden Effekt unterteilt. Bei hohen w/z-Werten dominiert der dispergierende Einfluss von Ultraschall und der Erstarrungsbeginn wird moderat verkürzt. Bei niedrigeren w/z-Werten der Zementsuspension, dominiert der beschleunigende Effekt wobei kein oder sogar ein negativer Einfluss auf die Verarbeitungseigenschaften beobachtet werden kann. Im nächsten Schritt werden die Untersuchungen auf den Betonmaßstab mit Hilfe einer Technikumsanlage erweitert und der Einfluss eines zweistufigen Mischens (also dem Herstellen einer Zementsuspension im ersten Schritt und dem darauffolgenden Vermischen mit der Gesteinskörnung im zweiten Schritt) mit Ultraschall auf die Frisch- und Festbetoneigenschaften betrachtet. Durch die Anlagentechnik, die mit der Beschallung größerer Mengen Zementsuspension einhergeht, kommen weitere Einflussfaktoren auf die Zementsuspension hinzu (z. B. Pumpgeschwindigkeit, Temperatur, Druck). Im Rahmen der Untersuchungen wurde eine Betonrezeptur mit und ohne Ultraschall hergestellt und die Frisch- und Festbetoneigenschaften verglichen. Darüber hinaus wurde ein umfangreiches Untersuchungsprogramm zur Ermittlung wesentlicher Dauerhaftigkeitsparameter durchgeführt. Aufbauend auf den Erfahrungen mit der Technikumsanlage wurde das Ultraschall-Vormischsystem in mehreren Stufen weiterentwickelt und abschließend in einem Betonwerk zur Betonproduktion verwendet. Die Untersuchungen am Beton zeigen eine deutliche Steigerung der Frühdruckfestigkeiten des Portlandzementbetons. Hierbei kann die zum Entschalen von Betonbauteilen notwendige Druckfestigkeit von 15 MPa deutlich früher erreicht werden. Das Ausbreitmaß der Betone (w/z-Wert = 0,47) wird infolge der Beschallung leicht reduziert, was sich mit den Ergebnissen aus den Untersuchungen an reinen Zementsuspensionen deckt. Bei Applikation eines Überdruckes in der Beschallkammer oder einer Kühlung der Suspension während der Beschallung, kann das Ausbreitmaß leicht gesteigert werden. Allerdings werden die hohen Frühdruckfestigkeiten der ungekühlten beziehungsweise drucklosen Variante nicht mehr erreicht. In den Untersuchungen kann gezeigt werden, dass das Potential durch die Ultraschall-Beschleunigung genutzt werden kann, um entweder die Festigkeitsklasse des Zementes leitungsneutral zu reduzieren (von CEM I 52,5 R auf CEM I 42,5 R) oder eine 4-stündige Wärmebehandlung vollständig zu substituieren. Die Dauerhaftigkeit der Betone wird dabei nicht negativ beeinflusst. In den Untersuchungen zum Sulfat-, Karbonatisierung-, Chlorideindring- oder Frost/Tauwiderstand kann weder ein positiver noch ein negativer Einfluss durch die Beschallung abgeleitet werden. Ebenso kann in einer Untersuchung zur Alkali-Kieselsäure-Reaktion kein negativer Einfluss durch die Ultraschallbehandlung beobachtet werden. In den darauf aufbauenden Untersuchungen wird die Anlagentechnik weiterentwickelt, um die Ultraschallbehandlung stärker an eine reale Betonproduktion anzupassen. In der ersten Iterationsstufe wird das in den Betonuntersuchungen verwendete Anlagenkonzept 1 modifiziert (von der In-line-Beschallung zur Batch-Beschallung) und als Analgenkonzept 2 für weitere Untersuchungen genutzt. Hierbei wird eine neue Betonrezeptur mit höherem w/z-Wert (0,52) verwendet, wobei die Druckfestigkeiten ebenfalls deutlich gesteigert werden können. Im Gegensatz zum ersten Beton, wird das Ausbreitmaß dieser Betonzusammensetzung gesteigert, was zur Reduktion von Fließmittel genutzt wird. Dies deckt sich ebenfalls mit den Beobachtungen an reinen Portlandzementsuspensionen, wo eine deutliche Verbesserung der Fließfähigkeit bei höheren w/z-Werten beschrieben wird. Für diese Betonrezeptur wird ein Vergleich mit einem kommerziell erhältlichen Erhärtungsbeschleuniger (synthetische C-S-H-Keime) angestellt. Hierbei zeigt sich, dass die Beschleunigungswirkung beider Technologien vergleichbar ist. Eine Kombination beider Technologien führt zu einer weiteren deutlichen Steigerung der Frühfestigkeiten, so dass hier von einem synergistischen Effekt ausgegangen werden kann. In der letzten Iterationsstufe, dem Anlagenkonzept 3, wird beschrieben, wie das Mischsystem im Rahmen einer universitären Ausgründung signifikant weiterentwickelt wird und erstmals in einem Betonwerk zur Betonproduktion verwendet wird. Bei den Überlegungen zur Weiterentwicklung des Ultraschall-Mischsystems wird der Fokus auf die Praktikabilität gelegt und gezeigt, dass das ultraschallgestütze Mischsystem die Druckfestigkeitsentwicklung auch im Werksmaßstab deutlich beschleunigen kann. Damit ist die Voraussetzung für eine ökologisch nachhaltige Optimierung eines Fertigteilbetons unter realen Produktionsbedingungen geschaffen worden. N2 - In the past years efficiency and sustainability as well as digitalization has come into focus for many different industries due to environmental and cultural changes. Compared to industries like IT, automotive or machine manufacturing, the building industry is still at the very beginning. Although, due to the large quantities of materials processed, the potential for savings and optimization is especially high in the construction industry. The international discussion on resources and climate is increasingly leading to new concepts being developed and tested in cement and concrete production. On one hand, intensive research and development is taking place in the area of alternative, climate-friendly cements. On the other hand, innovative concepts, like for example 3D-printing, are being tested in concrete production. Due to the construction, quality and durability requirements of buildings, precast concrete elements often have advantages compared to ready-mixed concrete. The high surface quality, durability, as well as the uniformity and weather-independent production are advantages that are repeatedly mentioned when speaking about precast concrete elements. It is necessary though, to discuss the concrete production process in the precast plant to make an efficient and sustainable production of precast concrete elements possible. Precast concrete producers mainly focus on optimizing early strength development. Fast hardening concrete is required for the demolding cycle, to enable shift work in production. Often, to ensure high early strengths, highly reactive cements are used in combination with high cement contents in the concrete and/or heat treatment. This contradicts a sustainable concrete concept. In this thesis, a new method for mixing concrete is discussed. Here, the reactive components of the concrete, cement and water, are pre-treated with ultrasound. Previous investigations on the influence of ultrasound on C3S and cement are the starting point of this work. These are further investigated in as part of this work. Furthermore, the production of concrete with ultrasound is investigated in a pilot scale. The gained experiences were used to further develop the ultrasonic concrete mixing system. Finally, the application of this technology in industrial concrete production is discussed. In this work, the effects of ultrasound on the hydration of C3S are further investigated. For this purpose, the hydration of sonicated suspensions is monitored by measuring the electrical conductivity, analysing the ion concentration by means of ICP-OES, thermal analysis, measuring the BET surface and an optical evaluation by means of scanning electron microscopy (SEM). The focus is on the first hours of hydration. During this time the hydration is most strongly influenced by the ultrasound treatment. The investigations show that the acceleration effect in diluted suspensions (w/s value = 50) is strongly dependent on the portlandite concentration of the solution. The lower the portlandite concentration, the greater the acceleration. Supplementary investigations of the ion concentration of the solution as well as investigations on hydrated C3S show, that first hydrate phases are observable immediately after sonication. The acceleration induced by ultrasound is strongest within the first 24 hours, gradually decreasing beyond this time. The investigations are concluded with experiments on C3S pastes (w/f value = 0.50), which confirm the observations on the diluted suspensions and show an earlier appearance and a greater number of C-S-H phases as a result of sonication. Visually, the C-S-H phases of the sonicated pastes do not only appear much earlier, they are also smaller and finely distributed over the surface of the C3S. In the next step, the focus of the investigation is extended from the model system with C3S to Portland cement. The question to be discussed is how different compositions of the cement suspension (w/c-ratio, amount of superplasticiser) or a change in the ultrasonic energy input affects the flow properties and the hardening behaviour. To consider the influence of different factors simultaneously, models are developed with design of experiments (DoE), which describes the behavior of the individual factors. To describe the workability, the slump of cement suspensions was determined. The acceleration of setting was measured by determining the time of normal setting of the cement suspension. The results of these investigations clearly show that the flow properties and the set time do not change linearly with increasing energy input. It is shown that there is a threshold of the specific energy input up to which the slump is increased. When this point, which is defined as the critical energy input, is exceeded, the slump decreased. The occurrence of this point is particularly dependent on the w/c ratio. As the w/c ratio decreases, the energy input that causes an improvement in the flow properties is reduced. At very low w/c-values (< 0.35), no improvement can be observed. If superplasticiser is added to the cement suspension before sonication, the properties of the cement suspension can be significantly influenced. In sonicated suspensions with superplasticiser, the superplasticiser-induced delay of the set time could be significantly reduced depending on the energy input. Furthermore, the energy input required to reduce the time of solidification is significantly reduced in suspensions with superplasticiser. Based on the observations on cement suspensions, the influence of ultrasound is divided into a dispersing and an accelerating effect. At high w/c-values, the dispersing effect of ultrasound dominates, and the set time is moderately decreased. At lower w/c-values of the cement suspension, the accelerating effect dominates, whereas no or even a negative influence on the workability can be observed. In the next step, the investigations will be extended to the concrete scale with the help of a laboratory plant. Here, the influence of two-stage mixing with ultrasound on the fresh and hardened concrete properties will be discussed. Due to the system set up, which goes hand in hand with the sonication of larger quantities of cement suspension, added further influencing factors to the cement suspension (e.g., Pumping speed, temperature, pressure). As part of the investigations, a concrete composition was produced with as well as without ultrasonic premixing and the fresh and hardened concrete properties were compared. In addition, a comprehensive investigation programme was undertaken to determine essential durability parameters. Based on the experiences with the laboratory device, the ultrasonic premixing system was further developed in several stages and finally used in an industrial concrete plant for concrete production. The results of the concrete investigations examine a significant increase in the early compressive strengths of Portland cement concrete. Here, the compressive strength of 15 MPa, which is required for stripping of concrete components, can be achieved significantly earlier. The slump of the concretes (w/c-value = 0.47) is slightly decreased as a result of sonication, which is in accordance with the results of the investigations on cement suspensions. If an overpressure is applied in the sonication chamber or the suspension is cooled during sonication, the slump can be slightly increased. However, the high early compressive strengths of the non-cooled or non-pressured concrete are no longer achieved. the investigations show that the acceleration potential can be used to either reduce the strength class of the cement without performance loss (e. g. from CEM I 52.5 R to CEM I 42.5 R) or to completely substitute a 4-hour heat treatment. The durability of the concrete is not affected. In the investigations on sulphate, carbonation, chloride penetration or freeze/thaw resistance, neither a positive nor a negative influence can be derived from sonication. Likewise, in an investigation on alkali-silica reaction, no negative influence can be observed due to ultrasonic premixing. Based on these investigations, the ultrasound mixing technology will be further developed in order to decrease the gap between laboratory and industrial production. In the first iteration, the system concept 1 used in the concrete investigations will be modified and used subsequently as system concept 2 for further tests. Here, a new concrete composition with a higher w/c ratio (0.52) is used, through which the compressive strengths can also be significantly increased. In contrast to the first concrete, the slump of this concrete composition is increased, which is used to reduce superplasticiser. This is also in accordance with the observations on Portland cement suspensions, where a clear improvement of the flowability at higher w/c-values is described. For this concrete formulation, a comparison is made with a commercially available hardening accelerator (synthetic C-S-H-seeds). The results show that the acceleration effect of both technologies is comparable. A combination of both technologies leads to a further significant increase in early strength, so a synergistic effect can be assumed. The last iteration stage, the system concept 3, describes how the mixing system is significantly developed within a university spin-off and is used for the first time in a concrete plant for concrete production. The conceptual design of the ultrasonic mixing system for industrial application, focusses on the practicability.it is shown that the mixing system can significantly accelerate the compressive strength development, even in an industrial scale. These results paves the way for optimising precast concrete in terms of sustainability. KW - Beton KW - Beton KW - Nachhaltigkeit KW - Ultraschall Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48919 ER - TY - JOUR A1 - Alemu, Yohannes L. A1 - Habte, Bedilu A1 - Lahmer, Tom A1 - Urgessa, Girum T1 - Topologically preoptimized ground structure (TPOGS) for the optimization of 3D RC buildings JF - Asian Journal of Civil Engineering N2 - As an optimization that starts from a randomly selected structure generally does not guarantee reasonable optimality, the use of a systemic approach, named the ground structure, is widely accepted in steel-made truss and frame structural design. However, in the case of reinforced concrete (RC) structural optimization, because of the orthogonal orientation of structural members, randomly chosen or architect-sketched framing is used. Such a one-time fixed layout trend, in addition to its lack of a systemic approach, does not necessarily guarantee optimality. In this study, an approach for generating a candidate ground structure to be used for cost or weight minimization of 3D RC building structures with included slabs is developed. A multiobjective function at the floor optimization stage and a single objective function at the frame optimization stage are considered. A particle swarm optimization (PSO) method is employed for selecting the optimal ground structure. This method enables generating a simple, yet potential, real-world representation of topologically preoptimized ground structure while both structural and main architectural requirements are considered. This is supported by a case study for different floor domain sizes. KW - Bodenmechanik KW - Strukturanalyse KW - Optimierung KW - Stahlbetonkonstruktion KW - Dreidimensionales Modell KW - ground structure KW - TPOGS KW - topology optimization KW - 3D reinforced concrete buildings Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63677 UR - https://link.springer.com/article/10.1007/s42107-023-00640-2 VL - 2023 SP - 1 EP - 11 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Alsaad, Hayder A1 - Schälte, Gereon A1 - Schneeweiß, Mario A1 - Becher, Lia A1 - Pollack, Moritz A1 - Gena, Amayu Wakoya A1 - Schweiker, Marcel A1 - Hartmann, Maria A1 - Voelker, Conrad A1 - Rossaint, Rolf A1 - Irrgang, Matthias T1 - The Spread of Exhaled Air and Aerosols during Physical Exercise JF - Journal of Clinical Medicine N2 - Physical exercise demonstrates a special case of aerosol emission due to its associated elevated breathing rate. This can lead to a faster spread of airborne viruses and respiratory diseases. Therefore, this study investigates cross-infection risk during training. Twelve human subjects exercised on a cycle ergometer under three mask scenarios: no mask, surgical mask, and FFP2 mask. The emitted aerosols were measured in a grey room with a measurement setup equipped with an optical particle sensor. The spread of expired air was qualitatively and quantitatively assessed using schlieren imaging. Moreover, user satisfaction surveys were conducted to evaluate the comfort of wearing face masks during training. The results indicated that both surgical and FFP2 masks significantly reduced particles emission with a reduction efficiency of 87.1% and 91.3% of all particle sizes, respectively. However, compared to surgical masks, FFP2 masks provided a nearly tenfold greater reduction of the particle size range with long residence time in the air (0.3–0.5 μm). Furthermore, the investigated masks reduced exhalation spreading distances to less than 0.15 m and 0.1 m in the case of the surgical mask and FFP2 mask, respectively. User satisfaction solely differed with respect to perceived dyspnea between no mask and FFP2 mask conditions. KW - Sport KW - Training KW - Fahrradergometer KW - sport KW - training KW - cycle ergometer KW - schlieren imaging KW - particles concentration KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230208-49262 UR - https://www.mdpi.com/2077-0383/12/4/1300 VL - 2023 IS - Volume 12, issue 4, article 1300 PB - Basel CY - MDPI ER - TY - CHAP A1 - Schwendner, Sascha A1 - Völlmecke, Lars A1 - Ho, Ai Phien A1 - Fischer, Jens A1 - Seim, Werner T1 - TESTING OF CONNECTIONS TAKEN FROM OLD NAILED ROOF TRUSSES N2 - Experimental testing of nailed connections taken from old roof trusses is presented in this paper. To enable the further use and preservation of nailed roof trusses, it is important to understand how the nail corrosion and aging processes of steel and wood affect the load-bearing capacity and deformation behaviour of such structures. The hypothesis was investigated whether corroded nails allow an increase in load-bearing capacity. Several old and new joints were tested in a first test series, and the results were very promising regarding the initial assumption. However, more tests must be carried out to verify the results. KW - Holzbau KW - nailed trusses KW - nailed constructions KW - Corrosion KW - Preservation KW - Withdreawal Y1 - 2023 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.6362 ER - TY - JOUR A1 - Wiegand, Torben A1 - Osburg, Andrea T1 - Synthesis, Curing and Thermal Behavior of Amine Hardeners from Potentially Renewable Sources JF - Polymers N2 - Research into bio-based epoxy resins has intensified in recent decades. Here, it is of great importance to use raw materials whose use does not compete with food production. In addition, the performance of the newly developed materials should be comparable to that of conventional products. Possible starting materials are lignin degradation products, such as vanillin and syringaldehyde, for which new synthesis routes to the desired products must be found and their properties determined. In this article, the first synthesis of two amine hardeners, starting with vanillin and syringaldehyde, using the Smiles rearrangement reaction is reported. The amine hardeners were mixed with bisphenol A diglycidyl ether, and the curing was compared to isophorone diamine, 4-4′-diaminodiphenyl sulfone, and 4-Aminonbenzylamine by means of differential scanning calorimetry. It was found that the two amines prepared are cold-curing. As TG-MS studies showed, the thermal stability of at least one of the polymers prepared with the potentially bio-based amines is comparable to that of the polymer prepared with isophorone diamine, and similar degradation products are formed during pyrolysis. KW - Epoxide KW - Epoxidharz KW - Polymere KW - epoxy KW - amine hardener KW - curing agent KW - bio-based KW - vanillin KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63745 UR - https://www.mdpi.com/2073-4360/15/4/990 VL - 2023 IS - volume 15, issue 4, article 990 SP - 1 EP - 12 PB - MDPI CY - Basel ER - TY - THES A1 - Torreiter, Laura T1 - Städtebauliche Aufwertung im Leipziger Osten: Migrant:innen als Pioniere beim Erwerb und der Sanierung von Baudenkmalen N2 - Anhand der städtebaulichen und sozialen Transformation des östlichen Gründerzeitgebietes von Leipzig wird die Rolle von migrantischen Hausbesitzenden und in der Bausanierung Tätigen im Aufwertungsprozess untersucht. Der Zugang zum Gegenstand verbindet Fragen der Stadtsoziologie und der Denkmalforschung. Im sozialen Feld der Stadterneuerung wird die Revitalisierung des ehemals von Leerstand und Rückbau betroffenen Baubestandes ausgehandelt. Die Positionen der Akteur:innen im Feld werden durch ihre Ausstattung mit ökonomischem, aber auch sozialem und kulturellem Kapital bestimmt. Angehörige der Planungs- und Denkmalbehörden verfügen über institutionalisiertes Kulturkapital und stehen damit Kleineigentümer:innen, häufig Autodidakt:innen, gegenüber. Baudenkmale können über ihre Funktion als Geldanlage und Wohnraum hinaus Status repräsentieren und symbolisch angeeignet werden. Denkmalschutz dient dem öffentlichen Interesse am Erhalt historischer Bausubstanz. Bei Sanierungen bestehen die Herausforderungen der Vereinbarkeit von Konservierung und Modernisierung, der Finanzierbarkeit für Eigentümer:innen und der Sozialverträglichkeit für Bewohnende. Eine Darstellung der historischen Entwicklung des Leipziger Ostens zu Beginn der Analyse veranschaulicht die Abhängigkeit kultureller, sozialer und ökonomischer Werte des Baubestandes vom jeweiligen gesellschaftlichen Kontext. Planerische Konzepte für das Gebiet zeigen, dass eine sozioökonomische Stabilisierung und Imageverbesserung erreicht werden sollte durch das Aufgreifen von Potentialen, wie den denkmalgeschützten Bauten, dem zuziehenden alternativen Milieu und migrantischer Ökonomie. Es wird deutlich, dass nach einer initialen Ansässigkeit von Pionier:innen die öffentlichen Infrastrukturmaßnahmen und Denkmalausweisungen eine Inwertsetzung v. a. durch externe Anlegende vorbereiteten. Darauf aufbauend wurden anhand einer qualitativen Befragung die Erfahrungen von städtischen Mitarbeitenden, Fachleuten und im Quartier Engagierten denen von lokalen migrantischen Hausbesitzenden und im Bereich Sanierung Tätigen gegenübergestellt. Migrant:innengruppen haben den Stadtraum in einer Phase vorherrschender Abwanderung durch die Eröffnung von Geschäften und Institutionen sowie den Erwerb von Immobilien für sich erschlossen. Strukturelle Benachteiligungen, wie Diskriminierung auf dem Arbeitsmarkt, ihre Ansässigkeit im sozial stigmatisierten Gebiet sowie geringes ökonomisches Kapital versuchten sie durch den Einsatz von sozialem Kapital auszugleichen. Sanierungen erfolgten mit hoher Eigenleistung und Rückgriff auf private Netzwerke. Die Analyse des Erneuerungsprozesses im Leipziger Osten zeigt, dass in einer initialen Phase Pionier:innen von Planenden und der Denkmalpflege als essentiell für die Entwicklung angesehen wurden. Günstige Instandsetzungen durch Kleineigentümer:innen wurden akzeptiert, um Gebäude vor weiterem Verfall zu bewahren. Mit der zunehmenden Forderung nach Verwendung hochwertiger Materialen werden die Sanierungsleistungen nach ästhetischen und letztlich ökonomischen Kriterien bewertet. Gegenüber sozialen Folgen einer Aufwertung von Bausubstanz lässt sich eine unkritische Haltung der Denkmalpflege erkennen. Bei der Vermarktung der Bestände durch professionelle Investierende findet die Sozialgeschichte des Stadtteils wenig Berücksichtigung, positiv besetzte Merkmale des Quartiers, wie Multikulturalität werden selektiv aufgegriffen. Der Anteil migrantischer Akteur:innen an der Entwicklung wird durch die Öffentlichkeit unzureichend anerkannt. Auch die Wertschätzung von Planenden und im Quartier Engagierten erfolgt v. a. anhand des ökonomischen Status. Hohe Erwartungen an die Geschäftsstruktur und die Erscheinung des Straßenbildes können nicht erfüllt werden. Migrantische Hausbesitzende und im Bereich Sanierung Tätige benötigen für die Auseinandersetzung mit der Denkmalpflege kulturelles Kapital. Sie erkennen die Bedeutung des historischen Baubestandes für die Stadt und die Arbeit der Institution an, kritisieren jedoch Sanierungsauflagen bzw. Mitarbeitende der Denkmalpflege und können sich z. T. gegen diese behaupten. Lokale migrantische Kleineigentümer:innen leisten durch ihre Quartiersbindung einen Beitrag zur ökonomischen und sozialen Stabilisierung. Mit ihrer Aufstiegsorientierung fördern sie in der Vermietungspraxis jedoch nur bedingt die Integration anderer Migrant:innen und grenzen sich von statusniedrigen Gruppen im Quartier ab. Migrantische Hausbesitzende und Unternehmende nehmen sich selbst als erfolgreiche Vorreitende in einer heterogener werdenden ostdeutschen Stadtgesellschaft wahr. Sie erkannten frühzeitig das Entwicklungspotential und gehören zu den Initiierenden und Profitierenden der Inwertsetzung. KW - Leipzig KW - Leipziger Osten KW - Stadtentwicklung KW - Baudenkmal KW - Denkmalpflege KW - Migration KW - Einwanderer KW - Migrant Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230717-64081 ER - TY - BOOK A1 - Siegler, Martin T1 - SOS: Medien des Überlebens. Die existenzielle Bedeutung von Lebenszeichen in Notfällen N2 - SOS-Signale auf hoher See, Klopfzeichen in Trümmerfeldern, Flaschenposten am Strand: Wenn Menschen in Not geraten, müssen sie mit allen Mitteln auf sich aufmerksam machen. Sie müssen Lebenszeichen senden, um am Leben zu bleiben. Dieses Buch erforscht das Phänomen des Lebenszeichens erstmals aus der Perspektive von Medienkulturwissenschaft, Zeichentheorie und Existenzphilosophie. Anhand zahlreicher Katastrophenszenarien wie Erdbeben, Lawinen und Bergwerkunglücken zeigt die Studie, warum Menschen in Not existenziell von Medien und Kommunikationsmitteln abhängen: Keine Lebenszeichen ohne Signalfackeln, Peilsender, Satelliten oder Infrarotsensoren. Medien in Notfällen sind mehr als nur Mittel zur Kommunikation, sie sind Bedingungen menschlicher Existenz. Sie entscheiden, ob und wie sich Leben in Not äußern kann, ob Lebenszeichen Gehör finden und ob Leben gerettet wird. Damit werfen Lebenszeichen ein neues Licht auf die elementaren Bedingungen menschlichen Lebens: Sie zeigen uns, dass Menschen in Not nur überleben, wenn sie mit Artefakten, Netzwerken und Infrastrukturen verbunden sind, die ihre Existenz ermöglichen. KW - Medien KW - Notfall KW - Medienphilosophie KW - Lebenszeichen KW - Notfall KW - Katastrophenfall KW - Kommunikationsmittel KW - Medien KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231026-64816 UR - https://www.degruyter.com/document/doi/10.1515/9783111075341/html SN - 978-3-11-107534-1 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Bapir, Baban A1 - Abrahamczyk, Lars A1 - Wichtmann, Torsten A1 - Prada-Sarmiento, Luis Felipe ED - Ozturk, Baki T1 - Soil-structure interaction: A state-of-the-art review of modeling techniques and studies on seismic response of building structures JF - Frontiers in Built Environment N2 - The present article aims to provide an overview of the consequences of dynamic soil-structure interaction (SSI) on building structures and the available modelling techniques to resolve SSI problems. The role of SSI has been traditionally considered beneficial to the response of structures. However, contemporary studies and evidence from past earthquakes showed detrimental effects of SSI in certain conditions. An overview of the related investigations and findings is presented and discussed in this article. Additionally, the main approaches to evaluate seismic soil-structure interaction problems with the commonly used modelling techniques and computational methods are highlighted. The strength, limitations, and application cases of each model are also discussed and compared. Moreover, the role of SSI in various design codes and global guidelines is summarized. Finally, the advancements and recent findings on the SSI effects on the seismic response of buildings with different structural systems and foundation types are presented. In addition, with the aim of helping new researchers to improve previous findings, the research gaps and future research tendencies in the SSI field are pointed out. KW - Boden-Bauwerk-Wechselwirkung KW - Bautechnik KW - Erdbeben KW - Grundlage KW - soil-structure interaction KW - structural engineering KW - earthquake engineering KW - foundations KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230206-49190 UR - https://www.frontiersin.org/articles/10.3389/fbuil.2023.1120351/full VL - 2023 IS - Volume 9 SP - 1 EP - 17 PB - Frontiers Media CY - Lausanne ER - TY - CHAP A1 - Baron, Nicole A1 - Mandavere, Melody A1 - Cheruiyot, Roselyne T1 - SE/ NPO Ecosystems and urban Governance in Johannesburg T2 - ISTR, Fifteenth International Conference, Montreal, Canada N2 - This paper presents initial findings from the empirical analysis of community based social enterprise (SE) and non-profit organisation (NPO) ecosystems in Johannesburg. SEs and NPOs are widely recognised as contributors to the resilience of marginalised urban communities. However, the connection between these organisations , urban governance, and community resilience has not yet been sufficiently understood , particularly in African urban contexts. The 'Resilient Urban Communities' project focuses on Johannesburg as a case study to shed light on this under-researched topic. The key to exploring it is understanding SEs and NPOs as providers of public services, job creators, and promoters of good governance, all of which contribute to community resilience. Using this premise as a starting point, this paper investigates ecosystem conditions with a particular focus on state-civil society partnerships. Empirical data was generated through semi-struc-tured interviews and analysed with a grounded theory approach. Preliminary results of this ongoing research reveal that urban geography is a relevant ecosystem factor for SEs and NPOs from marginalised communities. We also suggest that co-production could be an opportunity for growth within the investigated state-civil society partnership. KW - Südafrika KW - Johannesburg KW - Nonprofit-Organisation KW - Regionalentwicklung KW - Governance KW - Unterstützungsökosystem KW - Sozialunternehmen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63643 ER - TY - JOUR A1 - Londong, Jörg A1 - Barth, Marcus A1 - Söbke, Heinrich T1 - Reducing antimicrobial resistances by source separation of domestic wastewater JF - Frontiers in Environmental Health N2 - Antimicrobial resistances (AMR) are ranked among the top ten threats to public health and societal development worldwide. Toilet wastewater contained in domestic wastewater is a significant source of AMR entering the aquatic environment. The current commonly implemented combined sewer systems at times cause overflows during rain events, resulting in the discharge of untreated wastewater into the aquatic environment, thus promoting AMR. In this short research article, we describe an approach to transform combined sewer systems into source separation-modified combined sewer systems that separately treat toilet wastewater. We employ simulations for demonstrating that source separation-modified combined sewer systems reduce the emission of AMR- causing substances by up to 11.5 logarithm levels. Thus, source separation- modified combined sewer systems are amongst the most effective means of combating AMR. KEYWORDS KW - Allgemeinheit KW - Öffentlichkeit KW - Gesundheit KW - Kanal KW - Abwasser KW - Antibiotikum KW - Resistenz KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230403-49483 UR - https://www.frontiersin.org/articles/10.3389/fenvh.2023.1151898/full VL - 2023 IS - Volume 2, article 1151898 SP - 1 EP - 5 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Brokow-Loga, Anton A1 - Krüger, Timmo T1 - Potentials of Climate Emergency Declarations for degrowth transformations. The ambivalent stance of German municipalities in conflicts over a post-fossil future JF - Raumforschung und Raumordnung N2 - This paper addresses the scope for action by municipalities in a climate emergency and places it in the framework of ecomodern (urban) policy. We analyse the way in which two German ‘climate emergency municipalities’ translate conflicts of post-fossil transformation into concrete political and planning strategies. Although more than 2,200 authorities around the world have already declared a climate emergency, research on the impact of these resolutions on the political orientation of municipalities is very limited. Our research focus is on the (potentially agonistic) treatment of conflicts in planning. We argue that in times of a socio-ecological crisis, success in conflict resolution cannot refer to appeasement and depoliticisation. Instead, we propose a framework of five criteria, based on critical theory on ecomodern strategies, planning processes and degrowth. Thus, this practice-related and explorative paper connects empirical insights from the German cities of Constance and Berlin with an innovative normative framework. The findings tell a complex story of an, at least partial, admission of the failure of previous climate mitigation strategies, a lack of social institutions of limits, an instrumental relation to nature and a disregard for social injustices. The paper discusses how municipalities, in the context of ongoing tensions over the post-fossil transformation in Germany, on the one hand hold on to business-as-usual approaches, but on the other hand also set political impulses for change. KW - Stadtentwicklung KW - Wachstumskritik KW - Klimanotstand KW - Degrowth KW - Postwachstum KW - Postwachstumsstadt KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231204-64984 UR - https://rur.oekom.de/index.php/rur/article/view/1666 VL - 2023 IS - Vol. 81, No. 5 SP - 523 EP - 537 PB - oekom Verlag CY - München ER - TY - JOUR A1 - Schwenke, Nicolas A1 - Söbke, Heinrich A1 - Kraft, Eckhard T1 - Potentials and Challenges of Chatbot-Supported Thesis Writing: An Autoethnography JF - Trends in Higher Education N2 - The release of the large language model-based chatbot ChatGPT 3.5 in November 2022 has brought considerable attention to the subject of artificial intelligence, not only to the public. From the perspective of higher education, ChatGPT challenges various learning and assessment formats as it significantly reduces the effectiveness of their learning and assessment functionalities. In particular, ChatGPT might be applied to formats that require learners to generate text, such as bachelor theses or student research papers. Accordingly, the research question arises to what extent writing of bachelor theses is still a valid learning and assessment format. Correspondingly, in this exploratory study, the first author was asked to write his bachelor’s thesis exploiting ChatGPT. For tracing the impact of ChatGPT methodically, an autoethnographic approach was used. First, all considerations on the potential use of ChatGPT were documented in logs, and second, all ChatGPT chats were logged. Both logs and chat histories were analyzed and are presented along with the recommendations for students regarding the use of ChatGPT suggested by a common framework. In conclusion, ChatGPT is beneficial for thesis writing during various activities, such as brainstorming, structuring, and text revision. However, there are limitations that arise, e.g., in referencing. Thus, ChatGPT requires continuous validation of the outcomes generated and thus fosters learning. Currently, ChatGPT is valued as a beneficial tool in thesis writing. However, writing a conclusive thesis still requires the learner’s meaningful engagement. Accordingly, writing a thesis is still a valid learning and assessment format. With further releases of ChatGPT, an increase in capabilities is to be expected, and the research question needs to be reevaluated from time to time. KW - Chatbot KW - Künstliche Intelligenz KW - Hochschulbildung KW - AIEd KW - artificial intelligence KW - academic writing KW - ChatGPT KW - education Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231207-65016 UR - https://www.mdpi.com/2813-4346/2/4/37 VL - 2023 IS - Volume 2, issue 4 SP - 611 EP - 635 PB - MDPI CY - Basel ER - TY - JOUR A1 - Guo, Hongwei A1 - Alajlan, Naif A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Physics-informed deep learning for three-dimensional transient heat transfer analysis of functionally graded materials JF - Computational Mechanics N2 - We present a physics-informed deep learning model for the transient heat transfer analysis of three-dimensional functionally graded materials (FGMs) employing a Runge–Kutta discrete time scheme. Firstly, the governing equation, associated boundary conditions and the initial condition for transient heat transfer analysis of FGMs with exponential material variations are presented. Then, the deep collocation method with the Runge–Kutta integration scheme for transient analysis is introduced. The prior physics that helps to generalize the physics-informed deep learning model is introduced by constraining the temperature variable with discrete time schemes and initial/boundary conditions. Further the fitted activation functions suitable for dynamic analysis are presented. Finally, we validate our approach through several numerical examples on FGMs with irregular shapes and a variety of boundary conditions. From numerical experiments, the predicted results with PIDL demonstrate well agreement with analytical solutions and other numerical methods in predicting of both temperature and flux distributions and can be adaptive to transient analysis of FGMs with different shapes, which can be the promising surrogate model in transient dynamic analysis. KW - Wärmeübergang KW - Deep Learning KW - Modellierung KW - physics-informed activation function KW - heat transfer KW - functionally graded materials Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63666 UR - https://link.springer.com/article/10.1007/s00466-023-02287-x VL - 2023 SP - 1 EP - 12 PB - Springer CY - Berlin ER - TY - JOUR A1 - Damir, Mirhan A1 - Meyer, Martin A1 - Aziz, Hellen T1 - Patterns of Detachment: Spatial Transformations of the Phosphate Industry in el-Quseir, Egypt JF - Urban Planning N2 - The establishment of phosphate mines and processing plants by Italian entrepreneurs in el-Quseir in 1912 revitalized a town that had faced a steady decline after the opening of the Suez Canal and re-linked it to the world economy. To this day, the now defunct industrial site occupies a large section of physical el-Quseir and plays a key role in its identity. In this article, we explore the impact of the company’s successive industrialization and deindustrialization based on archival research, interviews, and mapping. By tracing physical changes on-site and in the city of el-Quseir from the founding of its phosphate industry until today, as well as the historical and current interactions of citizens with the industrial facilities, we hope to better understand the “cluster value” of the industrial plant in quotidian life and the effect of the vacuum left behind after the termination of production. As machinery and buildings are slowly eroding in the absence of expressed interest by the former Italian and current Egyptian owners, we aim to discuss the relationship between the citizens and their el-Quseir phosphate plant as a crucial element of its heritage value at the local level. KW - Ägypten KW - Industriekultur KW - Italien KW - Bergbau KW - Egypt KW - industrial heritage KW - Italy KW - mining KW - phosphate industry KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63805 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6053 VL - 2023 IS - Volume 8, No 1 SP - 1 EP - 16 PB - Cogitatio Press CY - Lissabon ER - TY - THES A1 - Jaouadi, Zouhour T1 - Pareto and Reliability-Oriented Aeroelastic Shape Optimization of Bridge Decks N2 - Due to the development of new technologies and materials, optimized bridge design has recently gained more attention. The aim is to reduce the bridge components materials and the CO2 emission from the cement manufacturing process. Thus, most long-span bridges are designed to be with high flexibility, low structural damping, and longer and slender spans. Such designs lead, however, to aeroelastic challenges. Moreover, the consideration of both the structural and aeroelastic behavior in bridges leads to contradictory solutions as the structural constraints lead to deck prototypes with high depth which provide high inertia to material volume ratios. On the other hand, considering solely the aerodynamic requirements, slender airfoil-shaped bridge box girders are recommended since they prevent vortex shedding and exhibit minimum drag. Within this framework comes this study which provides approaches to find optimal bridge deck cross-sections while considering the aerodynamic effects. Shape optimization of deck cross-section is usually formulated to minimize the amount of material by finding adequate parameters such as the depth, the height, and the thickness and while ensuring the overall stability of the structure by the application of some constraints. Codes and studies have been implemented to analyze the wind phenomena and the structural responses towards bridge deck cross-sections where simplifications have been adopted due to the complexity and the uniqueness of such components besides the difficulty of obtaining a final model of the aerodynamic behavior. In this thesis, two main perspectives have been studied; the first is fully deterministic and presents a novel framework on generating optimal aerodynamic shapes for streamlined and trapezoidal cross-sections based on the meta-modeling approach. Single and multi-objective optimizations were both carried out and a Pareto Front is generated. The performance of the optimal designs is checked afterwards. In the second part, a new strategy based on Reliability-Based Design Optimization (RBDO) to mitigate the vortex-induced vibration (VIV) on the Trans-Tokyo Bay bridge is proposed. Small changes in the leading and trailing edges are presented and uncertainties are considered in the structural system. Probabilistic constraints based on polynomial regression are evaluated and the problem is solved while applying the Reliability Index Approach (RIA) and the Performance Measure Approach (PMA). The results obtained in the first part showed that the aspect ratio has a significant effect on the aerodynamic behavior where deeper cross-sections have lower resistance against flutter and should be avoided. In the second part, the adopted RBDO approach succeeded to mitigate the VIV, and it is proven that designs with narrow or prolonged bottom-base length and featuring an abrupt surface change in the leading and trailing edges can lead to high vertical vibration amplitude. It is expected that this research will help engineers with the selections of the adequate deck cross-section layout, and encourage researchers to apply concepts of optimization regarding this field and develop the presented approaches for further studies. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,10 KW - Gestaltoptimierung KW - Vibration KW - Deck cross-sections KW - Reliability-based design optimization KW - Shape optimization KW - Pareto Front KW - Vortex-induced vibration Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230303-49352 ER -