TY - THES A1 - Eckardt, Stefan T1 - Adaptive heterogeneous multiscale models for the nonlinear simulation of concrete N2 - The nonlinear behavior of concrete can be attributed to the propagation of microcracks within the heterogeneous internal material structure. In this thesis, a mesoscale model is developed which allows for the explicit simulation of these microcracks. Consequently, the actual physical phenomena causing the complex nonlinear macroscopic behavior of concrete can be represented using rather simple material formulations. On the mesoscale, the numerical model explicitly resolves the components of the internal material structure. For concrete, a three-phase model consisting of aggregates, mortar matrix and interfacial transition zone is proposed. Based on prescribed grading curves, an efficient algorithm for the generation of three-dimensional aggregate distributions using ellipsoids is presented. In the numerical model, tensile failure of the mortar matrix is described using a continuum damage approach. In order to reduce spurious mesh sensitivities, introduced by the softening behavior of the matrix material, nonlocal integral-type material formulations are applied. The propagation of cracks at the interface between aggregates and mortar matrix is represented in a discrete way using a cohesive crack approach. The iterative solution procedure is stabilized using a new path following constraint within the framework of load-displacement-constraint methods which allows for an efficient representation of snap-back phenomena. In several examples, the influence of the randomly generated heterogeneous material structure on the stochastic scatter of the results is analyzed. Furthermore, the ability of mesoscale models to represent size effects is investigated. Mesoscale simulations require the discretization of the internal material structure. Compared to simulations on the macroscale, the numerical effort and the memory demand increases dramatically. Due to the complexity of the numerical model, mesoscale simulations are, in general, limited to small specimens. In this thesis, an adaptive heterogeneous multiscale approach is presented which allows for the incorporation of mesoscale models within nonlinear simulations of concrete structures. In heterogeneous multiscale models, only critical regions, i.e. regions in which damage develops, are resolved on the mesoscale, whereas undamaged or sparsely damage regions are modeled on the macroscale. A crucial point in simulations with heterogeneous multiscale models is the coupling of sub-domains discretized on different length scales. The sub-domains differ not only in the size of the finite elements but also in the constitutive description. In this thesis, different methods for the coupling of non-matching discretizations - constraint equations, the mortar method and the arlequin method - are investigated and the application to heterogeneous multiscale models is presented. Another important point is the detection of critical regions. An adaptive solution procedure allowing the transfer of macroscale sub-domains to the mesoscale is proposed. In this context, several indicators which trigger the model adaptation are introduced. Finally, the application of the proposed adaptive heterogeneous multiscale approach in nonlinear simulations of concrete structures is presented. N2 - Das nichtlineare Materialverhalten von Beton ist durch die Entwicklung von Mikrorissen innerhalb der heterogenen Materialstruktur gekennzeichnet. In dieser Arbeit wird ein Mesoskalenmodell entwickelt, welches die einzelnen Bestandteile der Materialstruktur explizit auflöst und somit die Simulation dieser Mikrorisse erlaubt. Dadurch können die wirklichen physikalischen Vorgänge, welche das komplexe nichtlineare Verhalten von Beton verursachen, durch relativ einfache Materialformulierungen abgebildet werden. Für Beton wird auf der Mesoskala ein 3-Phasenmodell vorgeschlagen, bestehend aus groben Zuschlägen, Mörtelmatrix und Übergangszone zwischen Zuschlag und Matrix. In diesem Zusammenhang wird ein effizienter Algorithmus vorgestellt, welcher ausgehend von einer gegebenen Sieblinie dreidimensionale Kornstrukturen mittels Ellipsoiden simuliert. Im Mesoskalenmodell wird das Zugversagen der Mörtelmatrix durch einen Kontinuumsansatz beschrieben. Um Netzabhängigkeiten, welche durch das Entfestigungsverhalten des Materials hervorgerufen werden, zu reduzieren, kommen nichtlokale Materialformulierungen zum Einsatz. Risse innerhalb der Übergangszone zwischen Zuschlag und Matrix werden, basierend auf einem kohäsiven Modell, mittels eines diskreten Rissansatzes abgebildet. Die Verwendung einer neuen Nebenbedingung innerhalb der Last-Verschiebungs-Zwangsmethode führt zu einer Stabilisierung des iterativen Lösungverfahrens, so dass eine effiziente Simulation von Snap-back Phänomenen möglich wird. Anhand von Beispielen wird gezeigt, dass Mesoskalenmodelle die stochastische Streuung von Ergebnissen und Maßstabseffekte abbilden können. Da auf der Mesoskala die Diskretisierung der inneren Materialstruktur erforderlich ist, steigt im Vergleich zu Simulationen auf der Makroskala der numerische Aufwand erheblich. Aufgrund der Komplexität des numerischen Modells sind Mesoskalensimulationen in der Regel auf kleine Probekörper beschränkt. In dieser Arbeit wird ein adaptiver heterogener Mehrskalenansatz vorgestellt, welcher die Verwendung von Mesoskalenmodellen in nichtlinearen Simulationen von Betonstrukturen erlaubt. In heterogenen Mehrskalenmodellen werden nur kritische Bereiche auf der Mesoskala aufgelöst, während ungeschädigte Bereiche auf der Makroskala abgebildet werden. Ein wichtiger Aspekt in Simulationen mit heterogenen Mehrskalenmodellen ist die Kopplung der auf unterschiedlichen Längenskalen diskretisierten Teilgebiete. Diese unterscheiden sich nicht nur in der Größe der finiten Elemente sondern auch in der Beschreibung des Materials. Verschiedene Methoden zur Kopplung nicht übereinstimmender Vernetzungen - Kopplungsgleichungen, die Mortar-Methode und die Arlequin-Methode - werden untersucht und ihre Anwendung in heterogenen Mehrskalenmodellen wird gezeigt. Ein weiterer wichtiger Aspekt ist die Bestimmung kritischer Regionen. Eine adaptive Lösungsstrategie wird entwickelt, welche die Umwandlung von Makroskalengebieten auf die Mesoskala erlaubt. In diesem Zusammenhang werden Indikatoren vorgestellt, die eine Modellanpassung auslösen. Anhand nichtlinearer Simulationen von Betonstrukturen wird die Anwendung des vorgestellten adaptiven heterogenen Mehrskalenansatzes demonstriert. T2 - Adaptive heterogene Mehrskalenmodelle zur nichtlinearen Simulation von Beton T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2010,1 KW - Beton KW - Mehrskalenanalyse KW - Finite-Elemente-Methode KW - Nichtlineare Finite-Elemente-Methode KW - Schadensmechanik KW - Mehrskalenmodell KW - Adaptives Verfahren KW - concrete KW - multiscale method KW - finite element method KW - continuum damage mechanics KW - adaptive simulation Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100317-15023 ER - TY - THES A1 - Bruns, Erich T1 - Adaptive Image Classification on Mobile Phones N2 - The advent of high-performance mobile phones has opened up the opportunity to develop new context-aware applications for everyday life. In particular, applications for context-aware information retrieval in conjunction with image-based object recognition have become a focal area of recent research. In this thesis we introduce an adaptive mobile museum guidance system that allows visitors in a museum to identify exhibits by taking a picture with their mobile phone. Besides approaches to object recognition, we present different adaptation techniques that improve classification performance. After providing a comprehensive background of context-aware mobile information systems in general, we present an on-device object recognition algorithm and show how its classification performance can be improved by capturing multiple images of a single exhibit. To accomplish this, we combine the classification results of the individual pictures and consider the perspective relations among the retrieved database images. In order to identify multiple exhibits in pictures we present an approach that uses the spatial relationships among the objects in images. They make it possible to infer and validate the locations of undetected objects relative to the detected ones and additionally improve classification performance. To cope with environmental influences, we introduce an adaptation technique that establishes ad-hoc wireless networks among the visitors’ mobile devices to exchange classification data. This ensures constant classification rates under varying illumination levels and changing object placement. Finally, in addition to localization using RF-technology, we present an adaptation technique that uses user-generated spatio-temporal pathway data for person movement prediction. Based on the history of previously visited exhibits, the algorithm determines possible future locations and incorporates these predictions into the object classification process. This increases classification performance and offers benefits comparable to traditional localization approaches but without the need for additional hardware. Through multiple field studies and laboratory experiments we demonstrate the benefits of each approach and show how they influence the overall classification rate. N2 - Die Einführung von Mobiltelefonen mit eingebauten Sensoren wie Kameras, GPS oder Beschleunigungssensoren, sowie Kommunikationstechniken wie Bluetooth oder WLAN ermöglicht die Entwicklung neuer kontextsensitiver Anwendungen für das tägliche Leben. Insbesondere Applikationen im Bereich kontextsensitiver Informationsbeschaffung in Verbindung mit bildbasierter Objekterkennung sind in den Fokus der aktuellen Forschung geraten. Der Beitrag dieser Arbeit ist die Entwicklung eines bildbasierten, mobilen Museumsführersystems, welches unterschiedliche Adaptionstechniken verwendet, um die Objekterkennung zu verbessern. Es wird gezeigt, wie Ojekterkennungsalgorithmen auf Mobiltelefonen realisiert werden können und wie die Erkennungsrate verbessert wird, indem man zum Beispiel ad-hoc Netzwerke einsetzt oder Bewegungsvorhersagen von Personen berücksichtigt. T2 - Adaptive Bilderkennung auf Mobiltelefonen KW - Kontextbezogenes System KW - Bilderkennung KW - Ubiquitous Computing KW - Mobile Computing KW - Maschinelles Sehen KW - Museumsführer KW - Handy KW - Wegrouten KW - Positionsbestimmung KW - PhoneGuide KW - Bluetooth tracking KW - pathway awareness KW - museum guidance system KW - PhoneGuide Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100707-15092 ER - TY - THES A1 - Budarapu, Pattabhi Ramaiah T1 - Adaptive multiscale methods for fracture T1 - Adaptive Multiskalen-Methoden zur Modellierung von Materialversagen N2 - One major research focus in the Material Science and Engineering Community in the past decade has been to obtain a more fundamental understanding on the phenomenon 'material failure'. Such an understanding is critical for engineers and scientists developing new materials with higher strength and toughness, developing robust designs against failure, or for those concerned with an accurate estimate of a component's design life. Defects like cracks and dislocations evolve at nano scales and influence the macroscopic properties such as strength, toughness and ductility of a material. In engineering applications, the global response of the system is often governed by the behaviour at the smaller length scales. Hence, the sub-scale behaviour must be computed accurately for good predictions of the full scale behaviour. Molecular Dynamics (MD) simulations promise to reveal the fundamental mechanics of material failure by modeling the atom to atom interactions. Since the atomistic dimensions are of the order of Angstroms ( A), approximately 85 billion atoms are required to model a 1 micro- m^3 volume of Copper. Therefore, pure atomistic models are prohibitively expensive with everyday engineering computations involving macroscopic cracks and shear bands, which are much larger than the atomistic length and time scales. To reduce the computational effort, multiscale methods are required, which are able to couple a continuum description of the structure with an atomistic description. In such paradigms, cracks and dislocations are explicitly modeled at the atomistic scale, whilst a self-consistent continuum model elsewhere. Many multiscale methods for fracture are developed for "fictitious" materials based on "simple" potentials such as the Lennard-Jones potential. Moreover, multiscale methods for evolving cracks are rare. Efficient methods to coarse grain the fine scale defects are missing. However, the existing multiscale methods for fracture do not adaptively adjust the fine scale domain as the crack propagates. Most methods, therefore only "enlarge" the fine scale domain and therefore drastically increase computational cost. Adaptive adjustment requires the fine scale domain to be refined and coarsened. One of the major difficulties in multiscale methods for fracture is to up-scale fracture related material information from the fine scale to the coarse scale, in particular for complex crack problems. Most of the existing approaches therefore were applied to examples with comparatively few macroscopic cracks. Key contributions The bridging scale method is enhanced using the phantom node method so that cracks can be modeled at the coarse scale. To ensure self-consistency in the bulk, a virtual atom cluster is devised providing the response of the intact material at the coarse scale. A molecular statics model is employed in the fine scale where crack propagation is modeled by naturally breaking the bonds. The fine scale and coarse scale models are coupled by enforcing the displacement boundary conditions on the ghost atoms. An energy criterion is used to detect the crack tip location. Adaptive refinement and coarsening schemes are developed and implemented during the crack propagation. The results were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale method is one of the first adaptive multiscale method for fracture. A robust and simple three dimensional coarse graining technique to convert a given atomistic region into an equivalent coarse region, in the context of multiscale fracture has been developed. The developed method is the first of its kind. The developed coarse graining technique can be applied to identify and upscale the defects like: cracks, dislocations and shear bands. The current method has been applied to estimate the equivalent coarse scale models of several complex fracture patterns arrived from the pure atomistic simulations. The upscaled fracture pattern agree well with the actual fracture pattern. The error in the potential energy of the pure atomistic and the coarse grained model was observed to be acceptable. A first novel meshless adaptive multiscale method for fracture has been developed. The phantom node method is replaced by a meshless differential reproducing kernel particle method. The differential reproducing kernel particle method is comparatively more expensive but allows for a more "natural" coupling between the two scales due to the meshless interpolation functions. The higher order continuity is also beneficial. The centro symmetry parameter is used to detect the crack tip location. The developed multiscale method is employed to study the complex crack propagation. Results based on the meshless adaptive multiscale method were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale methods are applied to study the fracture in practical materials like Graphene and Graphene on Silicon surface. The bond stretching and the bond reorientation were observed to be the net mechanisms of the crack growth in Graphene. The influence of time step on the crack propagation was studied using two different time steps. Pure atomistic simulations of fracture in Graphene on Silicon surface are presented. Details of the three dimensional multiscale method to study the fracture in Graphene on Silicon surface are discussed. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2015,1 KW - Material KW - Strukturmechanik KW - Materialversagen KW - material failure Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150507-23918 ER - TY - THES A1 - Heidenreich, Christian T1 - Adaptivität von freigeformten Flächentragwerken - Möglichkeiten zur Steigerung der Effizienz von Faserverbundstrukturen im Bauwesen N2 - Die vorliegende Arbeit fokussiert die Optimierung freigeformter adaptiver Faserverbundflächentragwerke auf Basis einer entwickelten und auf einem parametrischen Gesamtmodell basierenden Entwurfsmethode. Die Übertragung adaptiver, natürlich inspirierter Vorgänge stellt eine weitreichende Inspirationsquelle dar. Adaptive Tragwerke können unter Anwendung von Smart Materials als materialsparende, filigrane Tragwerke ausgeführt werden. Die Erfüllung der Grenzzustände der Tragfähigkeit und der Gebrauchstauglichkeit wird nicht allein über die Querschnittsabmessungen sichergestellt. Die notwendige Bauteilsteifigkeit kann vielmehr durch Eintragung von Aktivierungsenergie (Operational Energy) realisiert werden. Auf diese Weise kann die aufgrund der Bauteilabmessungen gebundene Energie (Embodied Energy) minimiert werden. Die entwickelte Entwurfsmethode ermöglicht die Auslegung und Optimierung materialminimierter Schalentragwerke in einem mehrstufigen Prozess. Hierbei wird aus tragwerksplanerischer Sicht die numerische Formfindung, die statische Berechnung und die Aktor- und Sensorpositionierung berechnet. Zudem werden Analysen hinsichtlich der Nachhaltigkeit auf Basis einer Lebenszyklusanalyse durchgeführt. Aufgrund der unterschiedlichen, sich aber gegenseitig beeinflussenden Kriterien, ist eine Optimierung durchzuführen. In der vorliegenden Arbeit wird ein Ansatz zur Definition zulässiger Ökobilanzkennwerte von Smart Materials auf Basis der Energiedifferenz zwischen einer passiven und einer adaptiven Struktur vorgestellt. Anhand dieser Kennwerte kann die Entwicklung zukünftiger Smart Materials unter dem Aspekt der ganzheitlichen Nachhaltigkeit erfolgen. Die Allgemeingültigkeit und Übertragbarkeit der Entwurfsmethode auf weitere Tragsysteme im Bauwesen und speziell anderer Materialkonstellationen wird anhand verschiedener Beispiele aufgezeigt. T3 - bauhaus.ifex research series - 2 KW - Entwurf KW - Formoptimierung KW - Form optimization KW - Parametrische Optimierung KW - Nachhaltigkeit KW - Schale KW - Adaptivität KW - Faserverbundschalentragwerk KW - adaptivity KW - fiber-reinforced shell structures KW - parametric design KW - parametric optimization KW - sustainability Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160314-25512 ER - TY - THES A1 - Ajjour, Yamen T1 - Addressing Controversial Topics in Search Engines N2 - Search engines are very good at answering queries that look for facts. Still, information needs that concern forming opinions on a controversial topic or making a decision remain a challenge for search engines. Since they are optimized to retrieve satisfying answers, search engines might emphasize a specific stance on a controversial topic in their ranking, amplifying bias in society in an undesired way. Argument retrieval systems support users in forming opinions about controversial topics by retrieving arguments for a given query. In this thesis, we address challenges in argument retrieval systems that concern integrating them in search engines, developing generalizable argument mining approaches, and enabling frame-guided delivery of arguments. Adapting argument retrieval systems to search engines should start by identifying and analyzing information needs that look for arguments. To identify questions that look for arguments we develop a two-step annotation scheme that first identifies whether the context of a question is controversial, and if so, assigns it one of several question types: factual, method, and argumentative. Using this annotation scheme, we create a question dataset from the logs of a major search engine and use it to analyze the characteristics of argumentative questions. The analysis shows that the proportion of argumentative questions on controversial topics is substantial and that they mainly ask for reasons and predictions. The dataset is further used to develop a classifier to uniquely map questions to the question types, reaching a convincing F1-score of 0.78. While the web offers an invaluable source of argumentative content to respond to argumentative questions, it is characterized by multiple genres (e.g., news articles and social fora). Exploiting the web as a source of arguments relies on developing argument mining approaches that generalize over genre. To this end, we approach the problem of how to extract argument units in a genre-robust way. Our experiments on argument unit segmentation show that transfer across genres is rather hard to achieve using existing sequence-to-sequence models. Another property of text which argument mining approaches should generalize over is topic. Since new topics appear daily on which argument mining approaches are not trained, argument mining approaches should be developed in a topic-generalizable way. Towards this goal, we analyze the coverage of 31 argument corpora across topics using three topic ontologies. The analysis shows that the topics covered by existing argument corpora are biased toward a small subset of easily accessible controversial topics, hinting at the inability of existing approaches to generalize across topics. In addition to corpus construction standards, fostering topic generalizability requires a careful formulation of argument mining tasks. Same side stance classification is a reformulation of stance classification that makes it less dependent on the topic. First experiments on this task show promising results in generalizing across topics. To be effective at persuading their audience, users of an argument retrieval system should select arguments from the retrieved results based on what frame they emphasize of a controversial topic. An open challenge is to develop an approach to identify the frames of an argument. To this end, we define a frame as a subset of arguments that share an aspect. We operationalize this model via an approach that identifies and removes the topic of arguments before clustering them into frames. We evaluate the approach on a dataset that covers 12,326 frames and show that identifying the topic of an argument and removing it helps to identify its frames. KW - Informatik KW - Suchmaschine KW - Argumentation KW - Internet KW - argumentation KW - controversial topics KW - natural language processing KW - search engines Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230626-64037 ER - TY - THES A1 - Riehmann, Patrick T1 - Advanced Visual Interfaces for Informed Decision-Making N2 - This thesis presents new interactive visualization techniques and systems intended to support users with real-world decisions such as selecting a product from a large variety of similar offerings, finding appropriate wording as a non-native speaker, and assessing an alleged case of plagiarism. The Product Explorer is a significantly improved interactive Parallel Coordinates display for facilitating the product selection process in cases where many attributes and numerous alternatives have to be considered. A novel visual representation for categorical and ordered data with only few occurring values, the so-called extended areas, in combination with cubic curves for connecting the parallel axes, are crucial for providing an effective overview of the entire dataset and to facilitate the tracing of individual products. The visual query interface supports users in quickly narrowing down the product search to a small subset or even a single product. The scalability of the approach towards a large number of attributes and products is enhanced by the possibility of setting some constraints on final attributes and, therefore, reducing the number of considered attributes and data items. Furthermore, an attribute repository allows users to focus on the most important attributes at first and to bring in additional criteria for product selection later in the decision process. A user study confirmed that the Product Explorer is indeed an excellent tool for its intended purpose for casual users. The Wordgraph is a layered graph visualization for the interactive exploration of search results for complex keywords-in-context queries. The system relies on the Netspeak web service and is designed to support non-native speakers in finding customary phrases. Uncertainties about the commonness of phrases are expressed with the help of wildcard-based queries. The visualization presents the alternatives for the wildcards in a multi-column layout: one column per wildcard with the other query fragments in between. The Wordgraph visualization displays the sorted results for all wildcards at once by appropriately arranging the words of each column. A user study confirmed that this is a significant advantage over simple textual result lists. Furthermore, visual interfaces to filter, navigate, and expand the graph allow interactive refinement and expansion of wildcard-containing queries. Furthermore, this thesis presents an advanced visual analysis tool for assessing and presenting alleged cases of plagiarism and provides a three-level approach for exploring the so-called finding spots in their context. The overview shows the relationship of the entire suspicious document to the set of source documents. An intermediate glyph-based view reveals the structural and textual differences and similarities of a set of finding spots and their corresponding source text fragments. Eventually, the actual fragments of the finding spot can be shown in a side-by-side view with a novel structured wrapping of both the source, as well as the suspicious text. The three different levels of detail are tied together by versatile navigation and selection operations. Reviews with plagiarism experts confirm that this tool can effectively support their workflow and provides a significant improvement over existing static visualizations for assessing and presenting plagiarism cases. The three main contributions of this research have a lot in common aside from being carefully designed and scientifically grounded solutions to real-world decision problems. The first two visualizations facilitate the decision for a single possibility out of many alternatives, whereas the latter ones deal with text at varying levels of detail. All visual representations are clearly structured based on horizontal and vertical layers contained in a single view and they all employ edges for depicting the most important relationships between attributes, words, or different levels of detail. A detailed analysis considering the context of the established decision-making literature reveals that important steps of common decision models are well-supported by the three visualization systems presented in this thesis. KW - Informatik KW - Visualisierung KW - Information Visualization KW - Preferential Choice KW - Text-based Visualization KW - Plagiarism Visualization KW - Product Search Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150907-24542 PB - Patrick Riehmann ER - TY - THES A1 - Gapševičius, Mindaugas T1 - Aesthetics of Maker Culture: the Active Role of the Audience N2 - In this work, practice-based research is conducted to rethink the understanding of aesthetics, especially in relation to current media art. Granted, we live in times when technologies merge with living organisms, but we also live in times that provide unlimited resources of knowledge and maker tools. I raise the question: In what way does the hybridization of living organisms and non-living technologies affect art audiences in the culture that may be defined as Maker culture? My hypothesis is that active participation of an audience in an artwork is inevitable for experiencing the artwork itself, while also suggesting that the impact of the umwelt changes the perception of an artwork. I emphasize artistic projects that unfold through mutual interaction among diverse peers, including humans, non-human organisms, and machines. In my thesis, I pursue collaborative scenarios that lead to the realization of artistic ideas: (1) the development of ideas by others influenced by me and (2) the materialization of my own ideas influenced by others. By developing the scenarios of collaborative work as an artistic experience, I conclude that the role of an artist in Maker culture is to mediate different types of knowledge and different positions, whereas the role of the audience is to actively engage in the artwork itself. At the same time, aesthetics as experience is triggered by the other, including living and non-living actors. It is intended that the developed methodologies could be further adapted in artistic practices, philosophy, anthropology, and environmental studies. KW - Medienkunst KW - BioArt KW - Media art KW - BioArt KW - Maker Culture Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230313-49396 ER - TY - THES A1 - Salmon, Naomi Tereza T1 - Als ich Künstler war oder: Von der Zähmung und Professionalisierung einer mythischen Freiheit oder: der Künstler als Arbeiter N2 - Einleitung: Die Kunst und der Kunstbetrieb haben sich in den letzten Jahrzehnten stark verändert und werden sich aller Voraussicht nach in Zukunft noch weit rascher und durchgreifender ändern. In meiner Dissertation geht es um eine Analyse des Jetzt-Zustandes des Kunstbetriebs und um die Konsequenzen die daraus für die zu erwartende Entwicklung zu ziehen sind, insbesondere bezüglich der Ausbildung von Künstlern an Kunsthochschulen. Dort sollten meines Erachtens die beruflichen Aspekte des künstlerischen Feldes (in und außerhalb der Akademie) verstärkt erläutert und vermittelt werden. Der Fokus der Arbeit liegt auf den folgenden 4 Aspekten: Der Künstler, die Arbeitswelt, die Ausbildung und das Netz und die Vernetzung und ihren Zusammenhängen. Diese Feststellungen basieren auf meinen Recherchen zu den vier Hauptthemen im Rahmen meiner Arbeit in der Lehre und der eigenen künstlerischen Praxis der letzten Jahre und spiegeln diese wider und sollen gleichzeitig als Beispiel für ihre Anwendung dienen und bieten einen Überblick in deren Ausführung in der Praxis. Hinweis Die hier vorliegende Dateien (in 5 Teilen) sind die digitale Veröffentlichung meiner Dissertation im Rahmen der Promotion im Studiengang "Kunst und Design" an der Bauhaus-Universität Weimar. Diese Publikation ist open source und wird in einem offenen und kollaborativen Prozess weiterentwickelt werden. Die jeweils aktuelle Version wird hier zu finden sein: http://phd.nts.is Dort befinden sich auch weitere Formate zum Download, ebenso wie der vollständige (markdown-formatierte) Quelltext. (Aus urheber- und lizenzrechtlichen Gründen sind in dieser Version der Bildtafeln einige Bilder ausgelassen. Die gedruckte Ausgabe enthält alle Bildtafeln, diese liegt in der Bibliothek der Bauhaus-Universität aus.) Teile: - Thesenpapier - PhD Dissertation - Bildtafeln - Der 5-Jahres-Plan - KIOSK09-Katalog KW - Kunst KW - Prekariat KW - Kunst KW - Professionalisierung KW - Prekariat Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130718-19807 UR - http://phd.nts.is ER - TY - THES A1 - Nowak, Saskia T1 - Alterung von Calciumsulfatphasen : Physiko-chemisch bedingte Feuchteaufnahmen und Einfluss auf die Reaktivität N2 - Die Arbeit zeigt die wesentlichen Gründe auf, warum betahalbhydratreiche Niederbranntgipsbinder (industriell als Stuckgips bezeichnet) oft sehr unterschiedliche Eigenschaften aufweisen. Der Anteil an Halbhydrat, welches aus dem stark hygroskopischen Anhydrit III (A III) durch die Reaktion mit Luftfeuchtigkeit entsteht, stellt einen erheblichen, bislang vollkommen unbeachteten Einfluss dar. Dieses Halbhydrat aus A III zeigt andere Oberflächeneigenschaften und ein Reaktionsverhalten, das von frisch gebranntem Betahalbhydrat abweicht. Es zeigt sich, wie weitreichend der Einfluss physiko-chemischer Oberflächenprozesse wie Adsorption und Kondensation ist. Hierdurch wird nicht nur die Oberflächenenergie der Partikel abgebaut, sondern auch eine Verminderung der Hydratationswärme verursacht. Somit wirken sich physikalische Vorgänge thermodynamisch aus. Einwirkende und resultierende Parameter einer Alterung wirken wie folgt äußerst komplex zusammen: Die dominierenden Bindemitteleigenschaften Abbindeverhalten und Wasseranspruch verändern sich durch eine Alterung sowohl aufgrund der Phasenumwandlungen als auch infolge der Veränderungen der Kristallite. Ebenso einflussreich ist die Veränderung der Oberflächencharakteristik. Die Auswirkung der Alterung auf die Reaktivität geht deutlich über den Abbau von Anhydrit III, die Dezimierung von abbindefähigem Material und die beschleunigende Wirkung von Alterungsdihydrat hinaus. Das Wachstum der Kristallite von Halbhydrat und die Verringerung der inneren Energie sowie die energetisch günstige spontane Beladung der Kristallgitterkanäle kleinster Anhydrit III-Kristallite mit dampfförmigem Wasser müssen als maßgebliche Ursachen für die Abnahme der Reaktivität infolge der Alterung herausgestellt werden. Die Abnahme der spezifischen Oberfläche und der Oberflächenenergie wirken sich außerdem auf den Lösungs- und den Hydratationsprozess aus. Der auf der Oberfläche von Anhydrit III kristallisierte Anhydrit II wirkt sich auch nach der Umwandlung von A III in Halbhydrat lösungshemmend aus. Infolge der alterungsbedingten Dihydratbildung, die bei anhaltender Feuchteeinwirkung einsetzt, wird diese Wirkung aufgehoben bzw. vermindert. Obgleich Dihydrat für seinen Beschleunigungseffekt bekannt ist, entfaltet Alterungsdihydrat infolge seiner besonderen Ausbildung innerhalb der wenige Moleküllagen umfassenden Kondenswasserschicht nur eine geringe keimbildende Wirkung. Eine wesentliche Erkenntnis betrifft den Bindungscharakter des Überstöchiometrischen Wassers. Diesbezüglich ist eine rein physikalische Bindung nachweisbar. Das in der Arbeit als stärker adsorptiv gebunden bezeichnete Wasser kommt neben der Freien Feuchte ausschließlich bei Anwesenheit von Halbhydrat vor. Dieser Zusammenhang wird erstmalig hergestellt und mit Hilfe der kristallchemisch bedingten höheren Oberflächenenergie von Halbhydrat erklärt. KW - Alterung KW - Calciumsulfat KW - Gips KW - Rietveld-Methode KW - Inverse Gaschromatographie KW - Alterungsdihydrat KW - überstöchiometrisches Wasser KW - Kristallitgröße KW - Heilungseffekt KW - Anhydrit III Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130320-18731 SN - 978-3-00-041328-5 ER - TY - THES A1 - Zimmermann, Christina T1 - Ambiguität im zeitgenössischen Film. Flugversuche : Zusammenfassung N2 - Die Dissertation über „Ambiguität im zeitgenössischen Film – Flugversuche“ folgt der Spur einer populären narrativen Tendenz im Kino – nämlich der Mehrdeutigkeit – und zeichnet ihr dramaturgisches Potential, wie ihre ethischen (bzw. mikropolitischen) Implikationen nach. Um typische Muster in der Wahrnehmung mehrdeutiger Filmerzählungen zu beschreiben, die bereits auf der vorbewussten Ebene der Affekte wirksam sind, greife ich auf Begriffe der Prozessphilosophie Alfred North Whitehead’s zurück und auf ihre neueren Reformulierungen bei Gilles Deleuze und Brian Massumi. Ausgehend von Alejandro González Iñárritu’s "Babel" (2006) begibt sich der Leser im ersten Teil auf einen virtuellen Rundflug durch ausgewählte Filmbeispiele mit einem kulturellen Ankerpunkt im heutigen Japan. Im zweiten Teil beschreibe und reflektiere ich mein methodisches Vorgehen in den ersten Phasen der Stoffentwicklung zu einem suggestiven Spielfilmprojekt, und kontextualisiere es mit Interviews zeitgenössischer Autorenfilmer, die ähnliche Erzählweisen entwickeln. N2 - The PhD dissertation on “Ambiguity in Contemporary Cinema – Attempts in Aviation” traces a prominent narrative tendency in cinema, outlining its dramaturgical potential as well as its ethical (or micropolitical) implications. In order to describe a number of typical patterns in ambiguous film narration that are operative already on the pre-conscious level of affects, I draw on concepts from the process philosophy by Alfred North Whitehead and its more recent reformulations by Gilles Deleuze and Brian Massumi. Departing from Alejandro González Iñárritu’s "Babel" (2006) in Part 1 the reader gets on a virtual flight through carefully chosen film examples with a cultural anchor point in Contemporary Japan. In Part 2 I describe and reflect on methodological questions for the first steps in a script development process for a suggestive screenplay, and relate my own approach to the work of other contemporary filmmakers. KW - Ambiguität KW - Film KW - Dramaturgie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160727-26336 ER - TY - THES A1 - Kaltenbrunner, Martin T1 - An Abstraction Framework for Tangible Interactive Surfaces N2 - This cumulative dissertation discusses - by the example of four subsequent publications - the various layers of a tangible interaction framework, which has been developed in conjunction with an electronic musical instrument with a tabletop tangible user interface. Based on the experiences that have been collected during the design and implementation of that particular musical application, this research mainly concentrates on the definition of a general-purpose abstraction model for the encapsulation of physical interface components that are commonly employed in the context of an interactive surface environment. Along with a detailed description of the underlying abstraction model, this dissertation also describes an actual implementation in the form of a detailed protocol syntax, which constitutes the common element of a distributed architecture for the construction of surface-based tangible user interfaces. The initial implementation of the presented abstraction model within an actual application toolkit is comprised of the TUIO protocol and the related computer-vision based object and multi-touch tracking software reacTIVision, along with its principal application within the Reactable synthesizer. The dissertation concludes with an evaluation and extension of the initial TUIO model, by presenting TUIO2 - a next generation abstraction model designed for a more comprehensive range of tangible interaction platforms and related application scenarios. KW - Informatik KW - Human Computer Interaction KW - Benutzeroberfläche KW - Open Source KW - Mensch-Maschine-Kommunikation KW - Tangible User Interfaces KW - Protocols Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180205-37178 ER - TY - THES A1 - Malik, Irfan T1 - An adaptive contact formulation for Isogeometric Finite Element Analysis N2 - Numerical simulation of physical phenomena, like electro-magnetics, structural and fluid mechanics is essential for the cost- and time-efficient development of mechanical products at high quality. It allows to investigate the behavior of a product or a system far before the first prototype of a product is manufactured. This thesis addresses the simulation of contact mechanics. Mechanical contacts appear in nearly every product of mechanical engineering. Gearboxes, roller bearings, valves and pumps are only some examples. Simulating these systems not only for the maximal/minimal stresses and strains but for the stress-distribution in case of tribo-contacts is a challenging task from a numerical point of view. Classical procedures like the Finite Element Method suffer from the nonsmooth representation of contact surfaces with discrete Lagrange elements. On the one hand, an error due to the approximate description of the surface is introduced. On the other hand it is difficult to attain a robust contact search because surface normals can not be described in a unique form at element edges. This thesis introduces therefore a novel approach, the adaptive isogeometric contact formulation based on polynomial Splines over hierarchical T-meshes (PHT-Splines), for the approximate solution of the non-linear contact problem. It provides a more accurate, robust and efficient solution compared to conventional methods. During the development of this method the focus was laid on the solution of static contact problems without friction in 2D and 3D in which the structures undergo small deformations. The mathematical description of the problem entails a system of partial differential equations and boundary conditions which model the linear elastic behaviour of continua. Additionally, it comprises side conditions, the Karush-Kuhn-Tuckerconditions, to prevent the contacting structures from non-physical penetration. The mathematical model must be transformed into its integral form for approximation of the solution. Employing a penalty method, contact constraints are incorporated by adding the resulting equations in weak form to the overall set of equations. For an efficient space discretization of the bulk and especially the contact boundary of the structures, the principle of Isogeometric Analysis (IGA) is applied. Isogeometric Finite Element Methods provide several advantages over conventional Finite Element discretization. Surface approximation with Non-Uniform Rational B-Splines (NURBS) allow a robust numerical solution of the contact problem with high accuracy in terms of an exact geometry description including the surface smoothness. The numerical evaluation of the contact integral is challenging due to generally non-conforming meshes of the contacting structures. In this work the highly accurate Mortar Method is applied in the isogeometric setting for the evaluation of contact contributions. This leads to an algebraic system of equations that is linearized and solved in sequential steps. This procedure is known as the Newton Raphson Method. Based on numerical examples, the advantages of the isogeometric approach with classical refinement strategies, like the p- and h-refinement, are shown and the influence of relevant algorithmic parameters on the approximate solution of the contact problem is verified. One drawback of the Spline approximations of stresses though is that they lack accuracy at the contact edge where the structures change their boundary from contact to no contact and where the solution features a kink. The approximation with smooth Spline functions yields numerical artefacts in the form of non-physical oscillations. This property of the numerical solution is not only a drawback for the simulation of e.g. tribological contacts, it also influences the convergence properties of iterative solution procedures negatively. Hence, the NURBS discretized geometries are transformed to Polynomial Splines over Hierarchical T-meshes (PHT-Splines), for the local refinement along contact edges to reduce the artefact of pressure oscillations. NURBS have a tensor product structure which does not allow to refine only certain parts of the geometrical domain while leaving other parts unchanged. Due to the Bézier Extraction, lying behind the transformation from NURBS to PHT-Splines, the connected mesh structure is broken up into separate elements. This allows an efficient local refinement along the contact edge. Before single elements are refined in a hierarchical form with cross-insertion, existing basis functions must be modified or eliminated. This process of truncation assures local and global linear independence of the refined basis which is needed for a unique approximate solution. The contact boundary is a priori unknown. Local refinement along the contact edge, especially for 3D problems, is for this reason not straight forward. In this work the use of an a posteriori error estimation procedure, the Super Convergent Recovery Solution Based Error Estimation Scheme, together with the Dörfler Marking Method is suggested for the spatial search of the contact edge. Numerical examples show that the developed method improves the quality of solutions along the contact edge significantly compared to NURBS based approximate solutions. Also, the error in maximum contact pressures, which correlates with the pressure artefacts, is minimized by the adaptive local refinement. In a final step the practicability of the developed solution algorithm is verified by an industrial application: The highly loaded mechanical contact between roller and cam in the drive train of a high-pressure fuel pump is considered. KW - Isogeometrische Analyse KW - Elementanalyse KW - Isogeometric Analysis KW - Error estimation KW - adaptive contact KW - Finite Element Analysis KW - Computational contact mechanics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220324-46129 ER - TY - THES A1 - Wieneke, Lars T1 - An analysis of productive user contributions in digital media applications for museums and cultural heritage. N2 - In a historical perspective, the relationship between digital media and the museum environment is marked by the role of museums as example use cases for the appli- cation of digital media. Today, this exceptional use as an often technology oriented application has changed and instead digital media have turned into an integral part of mediation strategies in the museum environment. Alongside with this shift not only an increasing professionalization of application development but also a grow- ing demand for new content can be observed. Comparable to its role as the main cost factor in the media industry, the production of content rises to a challenge for museums. In particular small and medium scale european museums with limited funding and an often low level of staff coverage face this new demand and strive therefore for alternative production resources. While productive user contributions can be seen as such an alternative resource, user contributions are at the same time a manifestation for a different mode of in- teracting with content. In contrast to the dominantly passive role of audiences as re- ceivers of information, productive contributions emerge as a mode of content ex- ploration and become in this regard influential for museum mediation strategies. As applications of user contributions in museums and cultural heritage are currently rather seldom, a broader perspective towards user contributions becomes necessary to understand its specific challenges, opportunities and limitations. Productive user contributions can be found in a growing number of applications on the Internet where they either complement or fully substitute corporate content production processes. While the Wikipedia1, an online encyclopedia written entirely by a group of users and open to contributions by all its users, is one of the most prominent examples for this practice, several more applications emerged or are be- ing developed. In consequence user contributions are about to become a powerful source for the production of content in digital media environments. N2 - Bis noch vor wenigen Jahren war das Verhältnis zwischen Museen und digitalen Medien durch die Nutzung von Museen als Fallstudien für die Anwendung neuer digitaler Medien geprägt. Im Gegensatz zu dieser frühen experimentellen und stark Technologie-orientierten Nutzung können digitale Medien heute als ein integraler Bestandteil der Vermittlungsstrategien (mediation strategies) im Museum betrachtet werden. Einhergehend mit dieser neuen Rolle kann nicht nur eine zunehmende Professionalisierung der Produktion digitaler Anwendung für den Museumsbereich beobachtet werden sondern auch ein stark wachsender Bedarf nach neuen Inhalten (content). Vergleichbar mit ihrer Rolle in der Medienindustrie stellen neue Inhalte auch im Museumsbereich einen der Hauptkostenfaktoren dar und werden besonders für kleinere und mittlere Museen mit begrenzten finanziellen Mitteln und dünner Per- sonaldecke zu einer zunehmenden Herausforderung. Von Nutzern erstellte Inhalte (user contributions) bieten sich als alternative Ressource für die Produktion von In- halten an. Gleichzeitig reflektiert die Produktion von Inhalten durch Nutzer eine andersartige Form der Auseinandersetzung mit Inhalten wie sie vor allem im Inter- net beobachtet werden kann. Im Gegensatz zum Modell des Zuschauers als pas- sivem Empfängern von Informationen kann die Produktion von Inhalten somit auch als Strategie zur Erschliessung von Themen verstanden werden und zeigt damit neuartige Perspektiven für die Vermittlung von Inhalten im Museum auf. Da der Einsatz derartiger Konzepte im Museumsbereich zur Zeit noch eine relativ geringe Verbreitung geniesst ist es notwendig, eine breitere Perspektive auf die pro- duktive Einbindung von Nutzern zu eröffnen um die besonderen Herausforderun- gen, Potentiale aber auch Einschränkungen ihrer Anwendung herauszuarbeiten. T2 - Eine Analyse produktiver Nutzer Beiträge in digitalen Medienanwendungen für Museen und kulturelles Erbe. KW - Neue Medien KW - Kulturerbe KW - Beteiligung KW - Content Management KW - User Generated Content KW - Rich Media Content KW - Inhalt KW - Content KW - Nutzerpartizipation KW - User-Created Content KW - Motivation KW - User created content KW - digital media KW - contribution management KW - content production Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20101214-15285 ER - TY - THES A1 - Jenabidehkordi, Ali T1 - An Efficient Adaptive PD Formulation for Complex Microstructures N2 - The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridy- namic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dy- namic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena. This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature. New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three dis- tinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions. KW - Peridynamik KW - Numerical Simulations KW - Peridynamics KW - Numerical Simulations Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221124-47422 ER - TY - THES A1 - Jenabidehkordi, Ali T1 - An efficient adaptive PD formulation for complex microstructures N2 - The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridynamic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dynamic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena. This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature. New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three distinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions. KW - Peridynamik KW - Peridynamics KW - Numerical Simulation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221116-47389 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4742 ER - TY - THES A1 - Alalade, Muyiwa T1 - An Enhanced Full Waveform Inversion Method for the Structural Analysis of Dams N2 - Since the Industrial Revolution in the 1700s, the high emission of gaseous wastes into the atmosphere from the usage of fossil fuels has caused a general increase in temperatures globally. To combat the environmental imbalance, there is an increase in the demand for renewable energy sources. Dams play a major role in the generation of “green" energy. However, these structures require frequent and strict monitoring to ensure safe and efficient operation. To tackle the challenges faced in the application of convention dam monitoring techniques, this work proposes the inverse analysis of numerical models to identify damaged regions in the dam. Using a dynamic coupled hydro-mechanical Extended Finite Element Method (XFEM) model and a global optimization strategy, damage (crack) in the dam is identified. By employing seismic waves to probe the dam structure, a more detailed information on the distribution of heterogeneous materials and damaged regions are obtained by the application of the Full Waveform Inversion (FWI) method. The FWI is based on a local optimization strategy and thus it is highly dependent on the starting model. A variety of data acquisition setups are investigated, and an optimal setup is proposed. The effect of different starting models and noise in the measured data on the damage identification is considered. Combining the non-dependence of a starting model of the global optimization strategy based dynamic coupled hydro-mechanical XFEM method and the detailed output of the local optimization strategy based FWI method, an enhanced Full Waveform Inversion is proposed for the structural analysis of dams. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,1 KW - Talsperre KW - Staumauer KW - Damage identification KW - Inverse analysis KW - Dams KW - Full waveform inversion KW - Wave propagation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190813-39566 ER - TY - THES A1 - Samingan, Agus Setianto T1 - An Experimental Study on Hydro-Mechanical Characteristics of Compacted Bentonite-Sand Mixtures N2 - Nuclear and hazardous waste disposal issues have become universal issues and problems related to the final disposal of these waste including finding a suitable site, natural and engineered barriers used, construction of the repository, long-term performance assessment have gained increasing attention all over the world. High-level radioactive and hazardous waste are required to be buried in deep geological repositories. In Germany, the ongoing researches have assessed the suitability of salt-stone formation in the country as a host rock candidate for its nuclear waste repository. Bentonite-based materials have been proposed to be used as sealing and buffer elements for the nuclear waste repository. Several hydro-mechanical processes will take place in the field and influence behaviour of the sealing and buffer elements of the repository. In this dissertation, a study on the hydro-mechanical characterisation of bentonite-sand mixtures is presented. Mixtures of a calcium-type bentonite, named Calcigel, and quartz sand were used in the investigation. Series of experiments including basic and physico-chemical characterisation, microstructure and fabric studies, suction and swelling pressure measurements, wetting and drying test, one-dimensional compression-rebound test, one-dimensional cyclic wetting-drying test under constant vertical stress, and saturated permeability test were conducted. The experimental data obtained are analysed and several characteristics of the material are brought out in this dissertation. Conclusions regarding basic behaviour of the materials are drawn based on the results of microstructure and fabric studies. Factors influencing the magnitude of suction and swelling pressure of the materials are outlined and discussed. The suction-induced compression and rebound characteristics of the material are described. The wetting and drying behaviour as influenced by the material boundary conditions are discussed. Permeability characteristics of the materials are examined based on several available permeability models. Several mechanical and hydraulic parameters that can be used in modelling using some available constitutive modelling approaches are derived based on the experimental data. At the end, conclusions regarding the hydro-mechanical characteristics of the materials are drawn and suggestions for future studies are made. N2 - Die (End-) Verwahrung von hoch toxischem chemischen und radioaktiven Abfällen hat aktuell weltweit an Bedeutung gewonnen und insbesondere Fragen bezüglich der „optimalen Einlagerung“, der Art der Versiegelung, die Konstruktion der Endlagerstätten sowie das Verhalten während „langer“ Zeiträume, sind Schwerpunkte der Forschung. Hoch radioaktive und chemische Abfälle sollen in der Mehrzahl der Konzepte in Kanistern versiegelt und unterirdisch in großer Tiefe in geeigneten geologischen Schichten gelagert werden. Aktuelle Forschungen in Deutschland haben ergeben, dass z.B. Salz-Gestein ein zuverlässiger Wirtsgesteins-Kandidat für die sicher Endlagerung des radioaktiven Abfalls ist. Bentonit basierendes Material wird derzeit als Versiegelung bzw. als Puffermaterial für hoch toxisches und radioaktives Abfallmaterial genutzt. Komplexe, gekoppelte hydromechanische Prozesse beeinflussen das Verhalten der Versiegelung sowie die Pufferwirkung der Endlagerstätte. In der vorliegenden Dissertation wird eine Studie über die hydromechanischen Eigenschaften von Betonit- Sand-Gemischen dargestellt. Die untersuchten Mischungen bestehen aus unterschiedlichen Anteilen von Kalzium-Bentonit, das so genannte Calcigel, und Quarzsand. Porosimetrieuntersuchungen und Studien mit dem ESEM ergaben Aufschluss über die Struktur und die physikalisch-chemischen Kennwerte des Gefüges auf der Mikroskala. Auf der Makroskala wurde u.a. die Saugspannungs-Wassergehaltsbeziehung der Gemische untersucht. Außerdem wurden zyklische Trocknungs- und Bewässerungsversuche, Kompressionsversuche im Ödometergerät und gesättigte Permeabilitätsversuche durchgeführt. Der Quelldruck und das Quellpotential wurden für unterschiedliche Belastungspfade untersucht. Die erzielten experimentellen Ergebnisse wurden im Rahmen der zu Grunde liegenden theoretischen Modelle ausgewertet und interpretiert. Wegweisende Erkenntnisse der Arbeit beziehen sich auf die Saugspannungs-Wassergehaltsbeziehung für unterschiedliche Versuchsrandbedingungen (freie Volumenänderung versus vollständig behinderte Volumenänderung) und die Entwicklung des Quelldrucks in Abhängigkeit der Saugspannung. Die erzielten Ergebnisse wurden zur Kalibrierung von zwei unterschiedlichen konstitutiven Ansätzen benutzt. Zusätzlich durchgeführte Versuche konnten abschliessend erfolgreich simuliert werden. T2 - Eine experimentelle Untersuchung zu den hydromechanischen Eigenschaften von verdichteten Bentonit-Sandmischungen KW - hydro-mechanics KW - unsaturated soils KW - bentonite-sand mixtures KW - suction KW - swelling KW - Hydromechanik KW - teilgesättigte Böden KW - Bentonit-Sandgemische KW - Saugspannung KW - Quellen KW - hydro-mechanics KW - unsaturated soils KW - bentonite-sand mixtures KW - suction KW - swelling Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20051007-7082 ER - TY - THES A1 - Wendler, André T1 - Anachronismen: Historiografie und Kino N2 - Die Arbeit »Anachronismen: Historiografie und Kino« geht von einer zunächst einfachen Beobachtung aus: beinahe immer, wenn Historiker_innen sich mit Geschichtsfilmen auseinander setzen, findet sich die lautstark geführte Beschwerde über die zahlreichen und vermeidbaren Anachronismen der Filme, die sie als ernst zu nehmende historiografische Beiträge desavouieren. Von hier ausgehend verfolgt die Arbeit ein dreifaches Projekt: zunächst in einer kritischen Analyse geschichtstheoretischer Texte einige Hinweise für den Status von Anachronismen für die moderne westliche Historiografie zu gewinnen. Zweitens zu untersuchen, welche Rolle Anachronismen für den Geschichtsfilm spielen. Und drittens von dort aus das epistemische Potential anachronistischen Geschichtskinos zu untersuchen. Eine der Hauptthesen, welche den Blick sowohl auf die Filme wie auf die theoretischen Texte leitet, besagt, dass Anachronismen genau jene Punkte sind, an denen die Medien einer jeden Geschichtsschreibung beobachtbar werden. Die Beobachtung und Beschreibung dieser Medien der kinematografischen Geschichtsschreibung unternimmt die Arbeit unter Zuhilfenahme einiger theoretischer Überlegungen der Actor Network Theory (ANT). Die Arbeit ist in vier Kapitel gegliedert, in deren Zentrum jeweils die Diskussion eines ANT-Begriffs sowie die Analyse eines Geschichtsfilmes steht. Zu den untersuchten Filmen gehören Shutter Island (Martin Scorsese, 2010), Chronik der Anna Magdalena Bach (Jean-Marie Straub/Danièle Huillet, 1968), Cleopatra (Joseph L. Mankiewicz, 1963) und Caravaggio (Derek Jarman, 1986). Die Arbeit kommentiert außerdem theoretische Texte zur Historiografie und zu Anachronismen von Walter Benjamin, Leo Bersani, Georges Didi-Huberman, Siegfried Kracauer, Friedrich Meinecke, Friedrich Nietzsche, Jacques Rancière, Leopold Ranke, Paul Ricœur, Georg Simmel, Hayden White u. a. N2 - The study “Anachronisms: Historiography and Cinema” uses a rather simple observation as its starting point: almost always when historians are dealing with history films they keep complaining about their numerous and avoidable anachronisms which render them worthless for any serious discussion of history. The study pursues a threefold project from here on: it first tries to develop some hints concerning the status of anachronisms for modern western historiography by a close reading of texts on the theory of history. Second it asks about the role of anachronisms in history films. And it thirdly investigates the epistemic potential of anachronistic history films. One of the study’s main theses is that anachronisms are the crucial points of historiographies at which their media can be observed. This observation is here done with the help of some key concepts of Actor Network Theory (ANT). The study is structured into four chapters that each discuss one of the ANT concepts and analyse one film in depth. The following films are discussed here: Shutter Island (Martin Scorsese, 2010), Chronik der Anna Magdalena Bach (Jean-Marie Straub/Danièle Huillet, 1968), Cleopatra (Joseph L. Mankiewicz, 1963) und Caravaggio (Derek Jarman, 1986). Theoretical positions on historiography and anachronisms by the following scholars are assesed: Walter Benjamin, Leo Bersani, Georges Didi-Huberman, Siegfried Kracauer, Friedrich Meinecke, Friedrich Nietzsche, Jacques Rancière, Leopold Ranke, Paul Ricœur, Georg Simmel, Hayden White etc. KW - Geschichtsschreibung KW - Anachronismus KW - Actor-Network-Theory KW - Historischer Film Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121219-17991 ER - TY - THES A1 - Riesel, Tobias T1 - Analyse des Querkrafttragverhaltens bewehrter Bauteile aus Porenbeton mit den Methoden der mathematischen Optimierung T1 - Shear Strength Analysis of Reinforced Aerated Concrete Members with Mathematical Programming Methods N2 - Im Rahmen der Arbeit wird das Querkrafttragverhalten bewehrter Bauteile aus Porenbeton untersucht. Die vorherrschende Beschreibung des inneren Kräftezustandes basiert auf der Modellvorstellung eines Fachwerks oder Sprengwerks mit Stahlzugstreben und Betondruckstreben. Ziel ist die Entwicklung eines alternativen Verfahrens zur Ermittlung des inneren Kräftezustandes. Ausgehend vom Prinzip des Minimums des elastischen Gesamtpotentials wird eine Extremalaufgabe für das mechanische Problem formuliert. Die numerische Umsetzung basiert auf der Überführung der Extremalaufgabe in eine nichtlineare Optimierungsaufgabe. Diese lässt sich mit Standardsoftware lösen. Der Vorteil dieser Vorgehensweise besteht darin, dass das grundlegende Verfahren unabhängig vom verwendeten Materialmodell ist. Nichtlineare Spannungs-Dehnungs-Beziehungen oder die Berücksichtigung der Rissbildung erfordern keine Anpassung des Berechnungsalgorithmus. Bewehrte Porenbetonbauteile besitzen im Hinblick auf das Trag- und Verformungsverhalten einige Besonderheiten. Berechnungsansätze für Stahlbetonelemente lassen sich nicht ohne entsprechende Modifikationen übertragen lassen. Die Bewehrung wird aus glatten Stäben hergestellt, so dass nach der Herstellung nur ein Haftverbund wirksam ist. Dieser kann über die Lebensdauer teilweise oder vollständig versagen. Die Kraftübertragung zwischen den Verbundelementen muss durch entsprechende Kopplungselemente (z.B. Querstäbe, Bügel, Endwinkel) sichergestellt werden. Der Bewehrungskorb ist im Porenbeton gebettet. Aufgrund der relativ niedrigen Festigkeit bzw. Steifigkeit des Porenbetons und des teilweise unwirksamen Verbundes treten Relativverschiebungen zwischen beiden Verbundmaterialien auf. Hier sind die Ursachen dafür zu finden, dass die Beanspruchung der Querkraftbewehrung viel geringer ist als bei vergleichbaren Stahlbetonbalken. Der Querkraftbewehrungsgrad erlaubt keine Rückschlüsse auf den Querkraftwiderstand. Das zentrale Anliegen der Arbeit ist die Implementierung nichtlinearer Materialansätze, der Rissbildung des Porenbetons sowie der porenbetonspezifischen Besonderheiten verschieblicher Verbund, diskrete Verankerung der Bewehrung und Relativverschiebungen zwischen Porenbeton und Bewehrung) in das Berechnungsmodell. Die Leistungsfähigkeit des entwickelten Berechnungsmodells wird anhand von Beispielen demonstriert. Die Kräfte in der Bewehrung sowie das Tragwerksverhalten werden realitätsnah bestimmt. N2 - In this thesis the behaviour of reinforced autoclaved aerated concrete (AAC) members is examined when they are subjected to shear forces. The main models used for analyzing shear forces are based on framework or truss frame models with concrete struts and steel tension ties. The primary objective is the development of an alternative model for evaluation of inner forces in AAC members. The mechanical problem is based on the Principle of Minimum Potential Energy relating to the stable equilibrium of conservative systems. Numerical solution will be achieved by direct energy minimization using nonlinear optimization techniques provided by standard software tools. The main advantage of this approach is the independence of material law from the base algorithm. Therefore nonlinear effects like cracks in concrete or yielding of reinforcement bars can be implemented without changing the fundamental model. Regarding to the load bearing and deflection behaviour reinforced autoclaved aerated concrete members have some specifics which will prevent the usage of calculation models for reinforced concrete. Steel rebar elements are not profiled and are covered by a corrosion protection. There is no sufficient bond between the reinforcement and the concrete. Forces have to be carried by discrete elements (e.g. crossbar, stirrup). The reinforcement cage is bedded in the concrete. When the beam or plate is loaded there will be small displacements between steel and concrete. These displacements have a strong influence on the forces in the rebar elements and have to be considered in a calculation model. This is the main reason why the ratio of shear reinforcement isn’t a measure for the load bearing capacity in shear. The alternative model developed in this thesis will implement the nonlinear material behaviour of steel and concrete, the cracking of concrete and the specific characteristic of AAC like non existing bond, discrete anchorage of reinforcement and displacements between reinforcement and concrete. The effectiveness of the model is shown by means of some test results by Wehr (AAC-Beams) and Daschner (AAC-plates). The model gives realistic results for the internal forces and the displacements of the AAC members as well as the local displacements of the reinforcement within the concrete. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 22 KW - Querkraft KW - Porenbeton KW - Schubbewehrung KW - Schubtragfähigkeit KW - Optimierung KW - Energiemethoden KW - Shear Strength KW - Mathematical Programming KW - Strain Energy KW - Autoclaved Aerated Conrete Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130128-18351 PB - Bauhaus-Universität Weimar Universitätsverlag CY - Weimar ER - TY - THES A1 - Martinez Soto, Aner T1 - Analyse und Erweiterung von bestehenden Prognosemodellen zur Bestimmung des Endenergiebedarfs im Wohnungssektor N2 - Die wachsende Notwendigkeit zur Energieeinsparung hat in verschiedenen Ländern zur Entwicklung von Prognosemodellen zur Bestimmung des Energiebedarfs im Wohnungssektor geführt. Obwohl Prognosemodelle prinzipiell eine Lösung zur Bestimmung des Energiebedarfs und zur Beurteilung der Auswirkungen von zukünftigen Energieeinsparmaßnahmen darstellen, sind die bestehenden Modelle jedoch mit Unwägbarkeiten in der Modellierung und Mängeln bezüglich der verwendeten Daten und Methodik behaftet. In dieser Arbeit werden die Übertragbarkeit, Genauigkeit und stochastische Unsicherheit von zwölf Prognosemodellen (MAED-2, FfE-Gebäudemodell, CDEM, REM, CREEM, ECCABS, REEPS, BREHOMES, LEAP, DECM, CHM, BSM) analysiert, wobei Deutschland als Fallbeispiel verwendet wird. Zur Verbesserung der Übertragbarkeit der bestehenden Modelle werden Anpassungen vorgeschlagen. Außerdem wird für jedes Modell eine Bestimmung der einflussreichsten Parameter auf den simulierten Endenergiebedarf mit Hilfe einer Sensitivitätsanalyse vorgenommen. Es konnte gezeigt werden, dass Modelle mit einem hohen Detaillierungsgrad nicht zwangsläufig genauere Ergebnisse für den Endenergiebedarf garantieren. Dennoch wurde festgestellt, dass Modelle mit einem niedrigen Detaillierungsgrad Ergebnisse mit größeren Unsicherheiten liefern als Modelle mit einem höheren Detaillierungsgrad. Es wurde weiterhin festgestellt, dass die einflussreichsten Parameter zur Bestimmung des Endenergiebedarfs im Wohnungssektor Innenraumtemperatur, Außentemperatur (Gradtagzahl), Bevölkerungsentwicklung und Anzahl der Gebäude/Wohnungen sind. Auf der Grundlage der Erkenntnisse zur Bewertung bestehender Modelle und der Bestimmung der einflussreichsten Parameter wurde ein optimiertes Prognosemodell (Transferable Residential Energy Model, TREM) entwickelt. Mit dessen Hilfe wurde die Entwicklung des Endenergiebedarfs im deutschen Wohnungssektor sowie in anderen Ländern (Vereinigtes Königsreich und Chile) prognostiziert. Diese Ergebnisse wurden anschließend mit statistischen Daten verglichen. Das TREM-Modell bestimmt den Endenergiebedarf auf der Grundlage der wahrscheinlichsten Variationen der einflussreichsten Eingangsparameter mit Hilfe einer Monte-Carlo-Simulation. Im Gegensatz zu bestehenden Modellierungsansätzen liefert das Modell damit auch einen Bereich mit Wahrscheinlichkeitsbändern für den zukünftigen Endenergiebedarf. Die Ergebnisse des TREM-Modells zeigen, dass das Modell genauere Ergebnisse liefern kann als derzeitige Modelle mit einem Mittelwert der prozentualen Differenz niedriger als 5% und einem Korrelationskoeffizienten r höher als 0,35 und darüber hinaus dazu geeignet ist, ohne Anpassungen eine Prognose der Entwicklung des zukünftigen Endenergiebedarfs im Wohnungssektor für unterschiedliche Länder zu erstellen. KW - Energieverbrauch KW - Wohnungssektor KW - Prognosemodelle KW - Unsicherheitsanalyse KW - Sensitivitätsanalyse KW - Energiebedarf KW - Montecarlo Simulation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170607-32251 ER -