TY - THES A1 - Ötsch, Silke T1 - Überwältigen und schmeicheln. Der physiologische, symbolische und ganzheitliche Körper in der Architektur. T1 - Distraction and Pamper. The Physiological, Symbolical and Integrated Body in Architecture. N2 - Der menschliche Körper ist Bezugspunkt von repräsentativen Strömungen der zeitgenössischen Architektur, so lautet die Hauptthese der Dissertation. Bislang wurde das zeitgenössische architekturimmanente Konzept des Körpers größtenteils selektiv und anhand wenig repräsentativer Beispiele von der Kritik behandelt: Ein auf physiologische Gesichtspunkte reduzierter Körper interagiert mit Bauten der klassischen Moderne oder neuen Medientechnologien. Eine umfassende Beschäftigung mit theoretischen Konzepten des Körpers und mit dem Fallbeispiel der zeitgenössischen Hotel- und Kasinoarchitektur in Las Vegas zeigt, dass der Begriff des Körpers komplexer geworden ist, womit der Bezug zum Körper weniger augenfällig erscheint. Der Ansatz der Phänomenologie, Erklärungsmuster durch eine Hinwendung zum Körper zu erhalten wird von verschiedenen Autoren in Frage gestellt. Wenn die Grenzen von Körper bzw. Leib und Umwelt nicht mehr zu bestimmen sind, tauge der Begriff nicht als Letztbegründung. Diese Kritik kann entkräftet werden, wenn auf das Modell der animate form der Philosophin Sheets-Johnstone zurückgegriffen wird. Dieses Konzept führt über Merleau-Pontys Körperbegriff hinaus, der Sheets-Johnstones Aussage nach abstrakt sei. Insbesondere eine Hinwendung zum taktil-kinästhetischen Körper liefert neue Perspektiven. Damit ist es sinnvoll, Architektur in ihrer Beziehung zum Körper zu beurteilen, weil der Körper definierbar und eingrenzbar ist. Anhand des Fallbeispiels der Hotel- und Kasinoarchitektur von Las Vegas kann aufzeigt werden, in welcher Weise sich Planer heute auf den Körper beziehen. Architektur geht in einem Megamedium auf, umgesetzt mit unterschiedlichen Techniken der Umweltgestaltung. Sowohl die Quantität als auch die Qualität der eingesetzten Reize nimmt zu. Dabei werden vor allem Reize eingesetzt, die tendenziell unbewusst wahrgenommen werden. Neben der Abstimmung auf die Sinne und die physische Beschaffenheit wird die symbolische Prägung des Körpers beachtet. Wünsche und Vorstellungen der Nutzer werden über Zielgruppenanalysen ermittelt und finden ihre Entsprechung in semiotischen Architekturelementen. Diese werden so gestaltet, dass der Nutzer den semiotischen Gehalt zugleich sinnlich erfährt. Dieses Konzept des Körpers wird als ganzheitlicher Körper bezeichnet. Aufschlussreich ist ein Vergleich mit Vorstellungen des Körpers vorausgehender Phasen, so z.B. dem Modell, das sich aus Scott Brown, Venturi und Izenours Buch Learning from Las Vegas ableiten lässt, und das sich ebenso aus Texten und Bauten von Zeitgenossen wie Lynch, Norberg-Schulz und Kahn herausarbeiten lässt. Über die Beschäftigung der Architekturtheoretiker mit der Sinneswahrnehmung entsteht ein Bewusstsein für den Einfluss des Symbolischen, das eine subjektive, durch das soziale und kulturelle Umfeld geprägte Wahrnehmung hervorbringt. Der Körper ist eingebettet in symbolische Systeme wie Konventionen und Traditionen, die sein Handeln bestimmen. Dahingegen beziehen sich Vertreter der klassischen Moderne hauptsächlich auf die physiologischen Eigenschaften des Körpers, seine Abmessungen und Bewegungsabläufe, wie Texte, Bauten und Menschmodelle z.B. von Meyer, Neutra, Le Corbusier und Neufert zeigen. Es fällt auf, dass in Texten über Architektur von Las Vegas häufig Begriffe vorkommen, die zugleich zentrale Termini der Phänomenologie sind, wie Atmosphäre und der englische Begriff experience. Es zeigt sich, dass sich die Bedeutungen der philosophischen Termini in der Architektur des Fallbeispiel widerspiegelt. Anders als die vorschnelle Etikettierung der Architekturströmung als „Erlebnisarchitektur“ suggeriert, bezieht sich der Begriff experience auf eine Ausrichtung an der Erfahrung. Diese ist das Resultat der langfristigen Prägung einer konkreten Nutzergruppe durch den in der Umwelt agierenden und durch seine symbolische Prägung beeinflussten Körper. Die Erfahrung impliziert das Erlebnis, als kurzfristige Interaktion von Körper und Umwelt. Am Fallbeispiel kann außerdem gezeigt werden, dass Techniken zur Schaffung von Atmosphären eingesetzt werden. In Anlehnung an den Philosophen Böhme kennzeichnen sich Atmosphären durch eine besondere Nähe von Architektur und Körper. Die Tatsache, dass Architekten gezielt Atmosphären schaffen, die gemeinhin nicht der Strömung der „Erlebnisarchitekur zugerechnet werden, weist darauf hin, dass sich das Leitbild des ganzheitlichen Körpers in unterschiedlichen Kontexten findet. Im Gegensatz zu Thesen Eisenmans oder Jamesons, die eine Entfremdung von Körper und Raum bzw. das Ende des anthropozentrischen Weltbilds feststellen, propagieren Planer wie Jerde die Herstellung von Architektur, die Nutzer und Umwelt in einer übergeordneten Ganzheit vereint. Ganzheit kann aber trotz feinerer Abstimmung auf den Körper nur grenzwertig erreicht werden, da Nutzer nicht vollständig erfasst werden können, sich die Planungen auf bestimmte Zielgruppen beschränken und die Interessen von Planer und Nutzer verschieden sind. N2 - As the main assumption of this thesis says, the human body is an important reference of contemporary architecture. Usually the relation of the human body and architecture is discussed by focussing on a body restricted on its physiological properties interacting with modern architecture or new media technology. The examination of theoretical concepts of the human body accompanied by the case study of the contemporary architecture of Las Vegas shows, that the concept of the body has undergone a change of meaning. Following the thesis, many contemporary planners use the concept of the integrated body. The phenomenological approach which consists in finding explanations by focussing on the human body and its perception is contested by different author because of the impossibility to define the boundaries between the human body and its environment. Consequently the body would not serve as a reference. This objection is invalidate if one considers the concept of animate form of the philosopher Sheets-Johnstone. This concept goes beyond the different notions of the body which Merleau-Ponty proposes as Eigenleib or Fleisch. Especially the focus on the tactile-kinaesthetic body opens up new perspectives. Thence, as the human body can be defined and qualified this reference makes sense. The way in which planners draw attention to the human body is explained by considering the case study of recently built resort architecture in Las Vegas. Architecture forms a part of a megamedium generated by different disciplines of environmental design. Both the quantity and the quality of the stimulus used increase. Planners mainly use stimulus which the user perceives unconsciously. Besides the sensual perception, symbolic qualities are taken into account. The wishes and ideas of a specific target group are determined and converted to architectural elements. These semiotic elements are designed in a way the user can experience the meaning sensuously. This concept of the body is denominated the integrated body. As the comparison with the notion of the body in Scott Brown, Venturi and Izenours book Learning from Las Vegas and in texts and buildings of the author’s contemporaries as Lynch, Norberg-Schulz and Kahn shows, the concept of the body has changed. By concentrating on the bodily perception architects and theoreticians become aware of the influence of the symbolic. The body is imbedded in a system of conventions and traditions affecting its actions. Unlike this, architects of the modern movement mainly refer to the physiological properties of the body, to its size and mechanical properties, as examples of texts, buildings and man models of Meyer, Neutra, Le Corbusier and Neufert show. It is noticeable that journalists often employ terms to describe Las Vegas’ architecture which are usually used in the phenomenological discourse as experience and atmosphere. It can be shown that the meaning of the philosophical notion are reflected in the architecture. As to architecture, experience does not only stands for “Erlebnisarchitektur” (which means architecture of the event) but relates to the long term influence the target group’s user has succeeded by interacting with the physical and symbolic environment. The architectural case study also shows, that planners employ techniques to generate atmospheres. Following the philosopher Böhme atmospheres are situated between the subject and the object and by appealing the senses. Thus the body is very close to architecture. The fact that different architectural movements use techniques to generate atmospheres shows, that the idea of the integrated body can be found in different contexts. The user’s reactions make clear that atmospheric spaces effect people. That is why those spaces are used for political economical aims. The use of the spatial effects does not depend solely on design questions but is directly linked to the political and economical situation. KW - Körper KW - Merleau-Ponty KW - Maurice / Phénoménologie de la perception KW - Phänomenologie KW - Taylorismus KW - Las Vegas KW - Venturi KW - Scott Brown and Partner KW - Hotel- und Kasinoarchitektur KW - Body KW - Phenomenology KW - Las Vegas (Nev.) KW - Architecture Theory KW - Jerde Partnership International Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050727-6926 ER - TY - THES A1 - Lehmkuhl, Hansjörg T1 - Zur praktischen Anwendung numerischer Analysemethoden für Stabilitätsprobleme T1 - The application of numerical methods to stability problems in practice N2 - In der täglichen Ingenieurpraxis werden in zunehmenden Maße numerische Analysen im Rahmen der Finite-Elemente-Methode auch zur Untersuchung stabilitätsgefährdeter Strukturen eingesetzt. Für die aktuelle Praxis, insbesondere im konstruktiven Stahlbau, ist jedoch festzustellen, dass zwischen der fortgeschrittenen Theorie und dem Niveau der praktischen Anwendung numerischer Stabilitätsanalysen eine große Kluft besteht. Aus praktischer Sicht erscheint es unumgänglich, die weiter wachsende Diskrepanz zwischen den umfangreichen theoretischen Möglichkeiten und der gegenwärtigen Praxis abzubauen. Damit steht der praktisch tätige Ingenieur vor der Aufgabe, sein Wissen auf dem Gebiet numerischer Stabilitätsanalysen zu vertiefen und bereits vorhandene FE-Programme um Berechnungsalgorithmen für umfassende numerische Stabilitätsanalysen zu erweitern. Dafür werden in der Arbeit die Grundlagen einer FEM- orientierten modernen Stabilitätstheorie einheitlich und aus Sicht einer praktischen Anwendung aufbereitet. Die Darstellung von realisierten programmtechnischen Umsetzungen für erweiterte Analysenmethoden wie Nachbeulanalysen, Pfadwechsel und Approximationen imperfekter Pfade ermöglicht eine Erweiterung des Methodenvorrates. Die innerhalb der Arbeit untersuchten Beispiele zeigen, dass durch die Anwendung der behandelten Verfahren das Tragverhalten einer stabilitätsgefährdeten Struktur wesentlich besser eingeschätzt werden kann als bei Beschränkung auf die herkömmlichen Analysemethoden. N2 - The daily engineering practice is characterized by an increasing use of numerical analyses also for structures influenced by stability problems. However it must be noticed that in practice, especially in steel construction, exists a large gap between the advanced stability theory and the level of practical applications of numerical stability analyses. From a practical point of view it seems be absolutely necessary to break up the continual growing discrepancy between comprehensive theoretical possibilities and current practice. Therefore practical engineers have to deepen their knowledge on the field of numerical stability analyses and have to expand existing finite element programs with special algorithms. For this purpose basics of a finite element orientated modern stability theory are presented from the view of practical application. Furthermore steps are shown for programming special methods like post-buckling analyses, path switching and approximations for load-deformation pathes including imperfections. The importance of the additional methods for a better understanding of the structures stability behaviour clearly comes out by the presentation of different examples of practical relevance. KW - Nichtlineare Stabilitätstheorie KW - Finite-Elemente-Methode KW - Stabilität KW - Stahlbau KW - Imperfektion KW - Nachbeulverhalten KW - Schale KW - Non-linear buckling KW - Finite Element Method KW - stability theory KW - post-buckling analysis KW - koiter approximation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20051013-7102 ER - TY - THES A1 - Rickert, Jörg T1 - Zum Einfluss von Langzeitverzögerern auf der Basis von Phosphonsäure auf die Hydratation einzelner Klinkerphasen, Portlandzementklinker und Portlandzemente T1 - About the influence of long-term retarders on the basis of phosphonic acid on the hydration of several clinker phases, portland cement clinkers and portland cements N2 - Neben dem Schwerpunkt der Verflüssigung werden auch Zusatzmittel benötigt, die extrem lange Verarbeitbarkeitszeiten des Betons ermöglichen. Eine neue Wirkungsgruppe, durch die Verarbeitbarkeitszeiten von über 90 Stunden er-reicht werden können, sind Langzeitverzögerer (LVZ) auf der Basis von Phosphonsäure. In systematischen Versuchen wurden grundlegende Erkenntnisse über die Wirkungsmechanismen von LVZ auf die Hydratation gewonnen. Es hat sich gezeigt, dass die verzögernde Wirkung von LVZ auf die Bildung von schwer löslichem Calciumphosphonat zurückzuführen ist, welches die Partikeloberflächen žabdichtetœ. Vom Angebot an gelöstem Calcium hängt es ab, ob sich das žabdichtendeœ Calciumphosphonat direkt bildet oder ob durch den Calciumanspruch des LVZ eine kurzzeitig verstärkte Hydratation reaktiver Klin-kerphasen hervorgerufen wird. Sulfatoptimierte Zemente wiesen aufgrund der Anteile an Sulfatträger genüge! nd Calcium-Ionen für eine sofortige Bildung von Calciumphosphonat auf. In Verbindung mit der Bildung von primärem Ettringit bildet die Sulfatträgeroptimierung die Grundlage für die erwünschte Wirkungsweise des Zusatzmittels. N2 - In addition to the large group of plasticizing admixtures, such kind of admixtures are required which enable a very long time of workability of concrete. The workability of concrete over a period of more than 90 hours can be achieved by long-term retarders. This new type of admixture is based on phosphonic acid. By systematic investigations profound knowledge about the operative mechanisms of long-term retarders could be drawn. The retarding action is due to a formation of sparingly soluble calcium phosphonate which žseal upœ the particle surface. Whether the addition of long-term retarder leads to an immediate formation of calcium phosphonate or to a short termed acceleration of the hydration of reactive clinker phases depends on the supply of solved calcium. Because of the adjusted calcium sulphate content in cement the concentration of calcium is high enough for an immediate formation of sparingly soluble calcium! phosphonate. In combination with the formation of primary ettringite the calcium sulphate agent is the basis for the desired mode of action of the long-term retarder. KW - Beton KW - Recycling KW - Hydratation KW - Klinker KW - Betonzusatzmittel KW - Betonzusatzmittel KW - Langzeitverzögerer KW - Phosphonocarbonsäure (PBTC) KW - Wirkungsmechanismen KW - Zement KW - concrete admixture KW - long-term retarder KW - phosphonocarbon acid (PBTC) KW - operative mechanisms KW - cement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040211-232 ER - TY - CHAP A1 - Kang, Julian A1 - Lho, Byeong-Cheol A1 - Kim, Jeong-Hoon T1 - XML-based Vector Graphics: Application for Web-based Design Automation N2 - Most retaining walls and box culverts built for arterial road construction are simple, and the design process of these structures is often repetitive and labor-intensive because they are so similar in structural configuration. Although some integrated design automation systems developed for retaining walls and box culverts have expedited the design process of these structures, the process of collecting and distributing the resultant engineering documents has not been fully integrated with the computer applications. We have been developing a Web-based design automation system to manage the resultant documents as well as to speed up the repetitive design process. Manipulation of engineering drawings in the Web page is one of the critical functions needed for Web-based design automation. eXtensible Markup Language (XML) and XML-based vector graphics are expected to facilitate the representation of engineering drawings in the Web page. In this paper, we present how we used XML and Scalable Vector Graphics (SVG) to compose engineering drawings and represent them in the Web page. XML Data Island we designed to define drawing components turned out effective in manipulating the engineering drawings in the Web page. KW - Architektur KW - Verteiltes System KW - XML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1872 ER - TY - JOUR A1 - Cerovsek, Tomo A1 - Turk, Ziga T1 - Working Together: ICT Infrastructures to Support Collaboration N2 - The paper summarizes a part of research carried out in ICCI project and provides a current review of ICT infrastructures supporting collaboration. It covers taxonomies, protocols, standards, components, typical subsystems as well as future trends and recommendation for two most important technologies with applications in AEC: (1) EIP (Enterprise information portal) – a single gateway to a company's information, knowledge base, and applications for all actors; (2) RTC (Real-Time Communication and Collaboration technologies) that provide means for asynchronous communication between geographically dislocated people using ICT. Proposed future developments are: orientation towards web services - with building information models, business intelligence, personalization, AEC information retrieval, p2p workspaces and grids. KW - Informationstechnik KW - Forschung KW - Europa KW - Teamwork Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2055 ER - TY - THES A1 - Lehmer, Babett T1 - Wechselwirkung zwischen Baugrundmodell und Gründungsentwurf am Beispiel eines Maschinenfundaments N2 - Die Beschreibung und Modellierung des Baugrundes erweist sich aufgrund seiner Genese als schwierig. Diese Tatsache soll am Beispiel eines Gründungsentwurfs, durch die Gegenüberstellung zweier unterschiedlicher Modellansätze demonstriert werden. In diese Betrachtung gehen zum einen "Subjektive Schätzungen" und zum anderen "[Geo]Statistische Baugrundmodelle" ein. Die Bemessung erfolgt anhand einer identischen Ausgangsdatenbasis. Im Ergebnis zeigen sich große Abweichungen zwischen beiden Modellansätzen, die sich auf unterschiedlichen Umgang mit den streuenden Baugrundkenngrößen zurückführen lassen. Die streuenden Baugrundkenngrößen werden bei den "Subjektiven Schätzungen" durch einen einzigen, ungünstig wirkenden Kennwert repräsentiert, der die Eigenschaften eines Homogenbereichs beschreibt. Bei den "[Geo]Statistischen Baugrundmodellen" werden die Baugrundkenngrößen in ihrer Streubreite erfasst, ausgewertet und mit der Monte-Carlo-Simulation in der Grenzzustandsfunktion berücksichtigt. KW - Baugrundmodell KW - Geotechnik KW - Baugrundmodell KW - Geostatistische Interpulation KW - Ordinary Kriging KW - Universal Kriging KW - Anisotropie KW - Subsoil-model KW - geostatistical methods KW - local drift KW - local trend KW - viariographie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5636 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - CHAP A1 - Molkenthin, Frank T1 - Web-based Information Systems: Data Monitoring, Analysis and Reporting for Measurements and Simulations N2 - This paper describes the concept, implementation and application of the Web-based Information System ‘Turtle’ for data monitoring, analysis, reporting and management in engineering projects. The system uses a generalised object-oriented approach for information modelling of physical state variables from measurements and simulations by sets of tensor objects and is implemented platform-independently as a Web application. This leads to a more flexible handling of measurement and simulation information in distributed and interdisciplinary engineering projects based on the concept of information sharing. The potential and advantages of Web-based information systems like ‘Turtle’ are described for one selected application example: a measurement programme dealing with the physical limnology of Lake Constance. KW - Mobile Computing KW - Funknetz KW - Informationssystem KW - World Wide Web Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1184 ER - TY - CHAP A1 - Molkenthin, Frank T1 - Web-based Collaborative Engineering based on Information Sharing - HydroWeb: An Education Experiment in the Internet N2 - This paper describes the concept and experiences of the international Open Distance Learning Course ‘HydroWeb’. This course deals with the introduction of Web-based Collaborative Engineering in standard education programmes of water related engineering and civil engineering based on information sharing. Organized under the umbrella of IAHR and ETNET21 this course is collaboration from several universities from all over the world. Started in 1999 the course demonstrates the potential and innovative opportunities of Web-Technology in education, research and engineering: Students from the different partner universities form small distributed teams to solve a given engineering problem in a time window of two weeks. To overcome the spatial distribution the students apply modern Web technology such as video conferencing, application sharing and document management. All results as well as the final reports are presented as Web document on a shared Web-based project platform (http://www.hydro-web.org). Besides the experiences to apply standard Web tools and working methods based on information sharing instead the conventional information exchange in the daily engineering work the students improve their soft skills operate successfully in international and interdisciplinary project environments as part of the ‘Technical Culture’ of nowadays. KW - Architektur KW - Verteiltes System KW - Informationsaustausch KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1869 ER - TY - CHAP A1 - Portz, Norbert T1 - Was muss eine öffentliche Ausschreibung leisten? N2 - Voraussetzungen einer ordnungsgemäßen Ausschreibung, Beachtung des Vergaberechtssystems, Vergaberecht bei Privatisierungen, Abgrenzung zwischen VOL- und VOF-Verfahren, ordnungsgemäße Schwellenwertermittlung, Finanzierung und Planung, richtige Vergabeart, richtige Leistungs- und Aufgabenbeschreibung, ordnungsgemäße Wertung, Aufhebung der Ausschreibung, ordnungsgemäßer Vergabevermerk KW - Baubetriebslehre KW - Öffentlicher Auftrag / Vergabe KW - Deutschland / Vergabe- und Vertragsordnung für Bauleistungen KW - Ausschreibung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7175 ER - TY - JOUR A1 - Neef, Sonja T1 - Was ist Europäische Medienkultur? T1 - Translating Europe N2 - Der Sage nach wurde Europa, jene fremde Königstochter, vom Göttervater Zeus in der Verkleidung eines majestätischen Stiers vom fernen Phoenizien nach Kreta – wörtlich – „übertragen“, das heißt von hier nach dort getragen. So gesehen erzeugt Europa einen dritten Raum, einen Trenn- und/oder Bindestrich zwischen Orient und Okzident, als diasporadische Figur und auch als Kontinent. Die Logik eines solchen Strichs, der zugleich trennt und verbindet, findet eine kartographische Entsprechung im nullten Längengrad, der die ganze Welt in ein Einheit schaffendes Koordinatensystem „übersetzt“, mit Greenwich als Zentrum. Ein Äquivalent eines solchen fixen Ausgangspunktes findet sich in der perspektivischen Europa-Darstellung in Tiepolos Darstellung der Kontinente im Deckenfries des Treppenhauses der Fürstbischöflichen Residenz in Würzburg. In diesem architektonischen Gemälde bildet Europa das Frontispiz, das nur von einem privilegierten Standort auf dem ersten Treppenabsatz unverzerrt betrachtet werden kann. Gegenstand dieses Beitrags sind eben diese drei medienkulturellen Europa-Inszenierungen: 1.) eine Sage, 2.) das kartographische Element des Nullmeridians und 3.) Tiepolos Treppenhausgemälde, sie alle verstehe ich als medienkulturelle Übersetzungen Europas. Ziel dieses Beitrags ist es zu fragen, wie diese drei kulturellen Objekte in ihren jeweiligen medialen Modi am Europa-Begriff arbeiten. Dreh- und Angelpunkt ist dabei der Akt des Übersetzens, und zwar sowohl im Sinne einer Umschrift von einem medialen Modus in den anderen als auch als durchaus physisch zu verstehende Bewegung einer Migration zwischen Heimat und Fremde. Ergebnis dieser Betrachtungen ist ein Europa-Begriff, der nicht unproblematisch mit sich selbst identisch ist, sondern sich erst in der Bewegung des Übersetzens konstituiert, also im dritten Raum oder als Bindestrich zwischen den Kulturen. N2 - The “origin” of the idea of Europe—if there is one—may be found in Hesiod’s mythological writings. Europe, daughter of Agenor, was—literally—“translated” from Phoenicia to Crete by Zeus who was disguised as a majestic bull. Thus seen, deception and robbery form the foundation of the birth of a continent, at least mythologically. This idea of Europe from antiquity soon developed into a world view in which Europe formed the centre of the terra cognita. In order for the terra incognita to be positioned in relation to this, a fixed point was required. This was finally found in the cartographic element of the zero-meridian. As an ideological line, the longitude-zero provided a unifying system into which the whole world was to be “translated.” Such a euro-centristic zero-point is not only found in cartography, it also has an equivalent (or translation) in perspectival painting, namely in the zero-point or vanishing point. The cultural significance of a zero-point in relation to the idea of Europe is particularly striking in Tiepolo’s painting of the continents in the Treppenhaus in Würzburg. In this architectonic painting, Europe is the subject matter of the frontispiece painted on the stair-well. In order to view this work without distorting the representation, it must be seen from a privileged point on the first half-landing. Here again: deception and illusion. The aim of this paper is to destabilize precisely these fixed positions which establish a Europe that appears unproblematically identical with itself. To do so, I will risk gazing at Tiepolo’s Europe from marginal points of view; that is, from Africa or Asia. And—for the longitude-zero—I will question the cut of the world into two opposite hemispheres, east and west. Europe, then, appears to be always in a state of translation, never fixed in an origin, never being ‘home’ as a final destination. Likewise the Europe in mythology, Europe as a continent, is split by difference while simultaneously driven by desire for a foreign country (Crete). Similarly, the zero-meridian, is a hybrid in between west and east, a translation in between home and abroad. Europe is then always permeated with otherness. KW - Kulturwissenschaften KW - Studiengang Kulturwissenschaften KW - Kulturwissenschaftliches Studium KW - Kulturwissenschaftler KW - Medienkultur KW - Europa KW - Geschichte KW - Antike KW - Culture of Media KW - History KW - europe Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2262 N1 - Eine englische Version dieses Artikels erscheint in Discerning Translations, ed. Mieke Bal and Joanne Morra, Princeton UP (forthcoming). ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Was ist die richtige Systemantwort auf die sich atomisierende Bauwirtschaft? N2 - Nur durch Aufträge entsteht das Potenzial, die hochwertigen und modernen Produkte, Verfahren und Systeme auch erfolgreich und vielfach in die Realität umzusetzen. Deshalb sind auch im traditionellen Bauwesen die Mechanismen des Marketings für die Akquisition zu analysieren und hinterfragt der Verfasser das Bild von Baubetrieben als kompetente Anbieter für alle Phasen des Bauens vom Baustoff bis zur Inbetriebnahme eines schlüsselfertigen Objektes. Systemanbieter bereiten die Basis für eine innovative und vernetzte Arbeitsweise. KW - Baubetriebslehre KW - Marketing KW - Akquisition KW - Bauwirtschaft Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7161 ER - TY - CHAP A1 - Miles, John A1 - Taylor, Mark A1 - Anumba, Chimay T1 - VRML Virtual Worlds - An Alternative to the Desktop Metaphor for GUI's? N2 - Metaphors are commonly used by software developers in the creation of GUI's. This paper looks at the use of multi-user VRML to create virtual metaphors, developing a conceptual design tool that can be used intuitively with little or no training. KW - Architektur KW - Verteiltes System KW - Graphische Benutzeroberfläche KW - VRML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1855 ER - TY - JOUR A1 - Kaapke, Kai A1 - Milbradt, Peter T1 - Voronoi-based finite volume method for transport problems N2 - Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Transport Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2558 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Alekseeva, Elena A1 - Tarlapan, Oleg T1 - Virtual Construction using Map-based Approach N2 - The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Virtuelle Realität KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2447 ER - TY - CHAP A1 - Katzer, Wolfgang T1 - Virtual Construction for our industry – an advantage now, a necessity soon N2 - Some key facts about the economic environment of construction industry are explained. It is shown that construction industry is very heterogeneous and has changed drastically during the recent years due to a rapidly moving commercial environment. Two examples of todays’s use of virtual construction tools in construction projects are presented. The first example is the document control for a large international project. The second is the application of 4D modelling in the preconstruction phase of a dam project. It is shown that virtual construction, is a major international trend that currently takes up speed. Some generic industry needs for Research and Development which aims at short and medium term results are presented. KW - Konstruktion KW - construction industry Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1573 ER - TY - THES A1 - Füllsack-Köditz, Raimo T1 - Verbundverhalten von GFK-Bewehrungsstäben und Rissentwicklung in GFK-stabbewehrten Betonbauteilen T1 - Bond characteristics of GFRP-rebars and cracking formation of GFRP reinforced concrete structures N2 - In der vorliegenden Arbeit werden im Rahmen von Ausziehversuchen die Verbundeigenschaften verschiedener Bewehrungsstäbe aus glasfaserverstärkten Kunststoffen (GFK) unter Berücksichti-gung signifikanter Einflussgrößen auf das Verbundverhalten wie Oberflächenprofilierung der Stäbe, Stabdurchmesser, Betonfestigkeit, Verbundlänge sowie Beanspruchungsart unter einheitlichen Versuchsrandbedingungen bestimmt. Es erfolgt eine Bewertung der Einflussgrößen, der Verbundeigenschaften und des Verbundversagens der untersuchten GFK-Bewehrungsstäbe. Basierend auf der Modellbildung zum Verbund zwischen GFK-Stäben und Beton wird die Bestimmung der Verankerungslänge aufgezeigt. Im Rahmen von Versuchen an GFK-stabbewehrten Dehnkörpern und Balken wird die Auswirkung der spezifischen mechanischen Eigenschaften der GFK-Stäbe auf die Rissentwicklung gegenüber stahlbewehrten Bauteilen untersucht. Insbesondere wird betrachtet, welchen Einfluss das Bewehrungsmaterial, der Bewehrungsgrad, die Betonfestigkeit sowie die Belastungsart auf die Mitwirkung des Betons auf Zug zwischen den Rissen sowie auf die Entwicklung des Rissbildes, der Rissbreiten und der Rissabstände haben. Auf Grundlage der experimentellen Untersuchungen wird die Übertragbarkeit der für Stahlbetonbauteile üblichen Ansätze zur Bestimmung der Rissbreite auf GFK-stabbewehrte Betonbauteile bewertet. N2 - The objective is to determine the bonding characteristics of different types of glass fiber reinforced plastic (GFRP) rebars using pull-out tests taking into consideration of significant influence parameters such as the type of bar surface deformation, bar diameter, concrete strength, bonding length and type of loading. The influence parameter will be appraised. The bonding characteristics an the bonding failure of the tested GFRP rebars will be classified. The determination of anchorage length for GFRP rebars will be shown based on bond models for GFRP rebars analogue to reinforcing steel. The scope of tests performed on GFRP reinforced beams and concrete tensile specimens will allow investigation into effects on the specific mechanical behaviours and the specific bonding characteristic of GFRP reinforcing bars on cracking formation. The effects of the physical behaviours of reinforcing material, percentage of reinforcement, concrete strength and type of loading on tension stiffening as well as crack pattern, crack widths and crack spacing will also be examined. Analysis of the results from these experiments will determine whether statements regarding crack width calculation are transferable between reinforced concrete structures and GFRP reinforced concrete structures. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 1 KW - Verbundverhalten KW - Glasfaserverstärkter Kunststoff KW - Stahlbetonkonstruktion KW - Stahlbeton KW - Stahlbetonbau KW - GFK KW - Ausziehversuch KW - Rissentwicklung KW - Rissbreite KW - Verbund KW - GFRP KW - bond KW - cracking KW - concrete KW - pull-out Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041206-2344 SN - 3-86068-240-7 ER - TY - THES A1 - Germerott, René T1 - Variantenuntersuchung für eine dauerhafte Bahndammsanierung unter zu Hilfenahme numerischer Methoden N2 - Das Ziel der Arbeit war es, die Standsicherheit eines Bahndammes im Vergleich der in Deutschland gültigen Vorschriften (DIN 1054 und Eurocode 7) zu untersuchen. Sollte sich dabei herausstellen, dass der Bahndamm in der gegebenen Situation die Standsicherheitsanforderungen nicht erfüllt sollten verschiedene Sanierungsvarianten vorgeschlagen und für eine Vorzugsvariante die wichtigsten Nachweise durchgeführt werden. Zunächst wurden die Allgemeinen Grundlagen der zur Zeit in Deutschland gültigen Vorschriften erläutert und anschließend auf das konkrete Projekt bezogen gegenübergestellt. Es stellte sich heraus, dass die Anforderungen an die Standsicherheit bei Berechnung nach beiden Vorschriften nicht erfüllt werden konnten. Somit war es notwendig für die gegebene Situation mögliche Sanierungsvorschläge zu entwickeln. Diese wurden anschließend kurz vorgestellt und erläutert. Schließlich wurden für die Vorzugsvariante die wichtigsten Nachweise im Vergleich der Vorschriften (DIN 1054 und Eurocode 7) durchgeführt und verglichen. KW - Aktiver Erddruck KW - Bewehrte Erde KW - Böschungsbruch KW - Erddruck KW - Eurocode 7 KW - Geländebruch KW - Passiver Erddruck KW - Pfahlwand KW - DIN 1054 Teil 100 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3500 ER - TY - CHAP A1 - Robert-Nicoud, Yvan A1 - Raphael, Benny A1 - Smith, Ian F. C. T1 - Using entropy to maximize the usefulness of data collection N2 - This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon’s Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system. KW - Mobile Computing KW - Funknetz KW - Entropie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1177 ER - TY - CHAP A1 - Parmee, Ian A1 - Abraham, Johnson T1 - User-centric Evolutionary Design Systems - the Visualisation of Emerging Multi-Objective Design Information N2 - The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers. KW - Konzipieren KW - Bauwerk KW - Künstliche Intelligenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1094 ER - TY - JOUR A1 - Katranuschkov, Peter A1 - Gehre, Alexander A1 - Scherer, Raimar J. T1 - User Requirements Capture in Distributed Project Environments: A Process-centred Approach N2 - Efforts to define standards for representing AEC/FM data have been fairly successful. However defining a standard reference process model has not met with the same success. Yet almost every conceptual modelling or software development project starts by defining the business processes to be supported and the related requirements to be satisfied. This paper describes a new process-centred methodology for user requirements capture developed in the ICCI project (IST-2001-33022). Its essence is in recognising user requirements and use cases in the context of the real construction process, identifying the actors and roles for each individual activity and associating these activities with information, communication and standardisation requirements on the basis of a formalised specification, named the Process Matrix. In the paper we outline the history of process matrix development, introduce the basic structure of the matrix and show how it can be further extended and refined. We present also a web-based software implementation of the developed approach, describe how it has been used in ICCI and outline further perspectives. KW - Informationstechnik KW - Forschung KW - Europa KW - Bedarfsforschung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2029 ER -