TY - THES A1 - Machacek, Helen T1 - Analyse von Einflussfaktoren des Widerstands feinkörniger Böden bei hydraulischer Belastung N2 - Bisherige Untersuchungen zum hydraulischen Grundbruch im bindigen Baugrund haben gezeigt, dass der Versagensmechanismus durch hydraulisch induzierte Risse ausgelöst wird. Um umströmte Bauwerke im Grundwasser sicher zu dimensionieren, ist daher ein Nachweis gegen hydraulisch induzierte Rissentstehung unerlässlich. Ein solcher existiert bisher jedoch nicht, da die Rissentstehung in bindigen Böden äußerst komplex ist und die zahlreichen Einflussgrößen nicht ausreichend untersucht sind. Aus diesem Grund wurde im Rahmen dieser Dissertation eine Laborstudie zu hydraulisch induzierter Rissbildung in verschiedenen feinkörnigen Böden in einem neuartigen Triaxialversuch durchgeführt. Aus den zahlreichen Versuchsvarianten lassen sich die wichtigsten Einflussgrößen auf den Widerstand des Bodens gegen Rissentstehung ermitteln. Die experimentelle Arbeit wird durch eine numerische Analyse der Versuchsvariationen ergänzt. Daraus lässt sich eine Hypothese zur Rissentstehung in bindigen Böden ableiten, die in Einklang mit der klassischen Bruchmechanik steht. KW - Hydraulischer Grundbruch KW - Bindiger Boden KW - Rissbildung KW - Triaxialversuch KW - Fracking KW - hydraulisch induzierter Riss Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240109-65232 ER - TY - JOUR A1 - Patzelt, Max A1 - Erfurt, Doreen A1 - Ludwig, Horst-Michael T1 - Quantification of cracks in concrete thin sections considering current methods of image analysis JF - Journal of Microscopy N2 - Image analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre-processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, the crack area, lengths and widths were estimated automatically within a single workflow. Crack patterns caused by freeze-thaw damages were investigated. To compare the inner degradation of the investigated thin sections, the crack density was used. Cracks in the thin sections were measured manually in two different ways for validation of the automatic determined results. On the one hand, the presented work shows that the width of cracks can be determined pixelwise, thus providing the plot of a width distribution. On the other hand, the automatically measured crack length differs in comparison to the manually measured ones. KW - Beton KW - Rissbildung KW - Bildanalyse KW - Maschinelles Lernen KW - Mikroskopie KW - concrete KW - crack KW - degradation KW - transmitted light microscopy Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220811-46754 UR - https://onlinelibrary.wiley.com/doi/full/10.1111/jmi.13091 VL - 2022 IS - Volume 286, Issue 2 SP - 154 EP - 159 ER - TY - THES A1 - Zeh, Rainer T1 - Die Zugfestigkeit bindiger Böden als Kriterium der Rissgefährdung mineralischer Oberflächenabdichtungen T1 - The tensile strength of cohesive soils as cracking criteria of mineral cover linings N2 - Oberflächenabdichtungen von Deponien sind in ihrer langfristigen Funktion häufig durch eine austrocknungsbedingter Rissbildung der mineralischen Dichtungskomponente gefährdet. Als Ursachen gelten insbesondere das standortspezifische Klima mit den stark schwankenden Randbedingungen (Niederschlag, Temperatur), Pflanzen und Tiere sowie auch ein ungeeigneter Systemaufbau. Durch einen Wasserentzug treten Schrumpfungsprozesse in der mineralischen Dichtung auf welche über negative Dehnungen zu Dehnungsbrüchen und damit zu einer Rissbildung führen. Für die Beanspruchbarkeit eines Dichtungsmaterials bei Wasserentzug sind insbesondere dessen Schrumpfverhalten und dessen Zugfestigkeit von Bedeutung. Beide Eigenschaften wurden durch eigens konzipierte Laborversuche beispielhaft an zwei typischen Dichtungsböden untersucht. Die Ergebnisse zeigen eine große Abhängigkeit von der Wasserspannung sowie von der Bodenstruktur. Für die Zugfestigkeit und dem daraus abgeleiteten Dehnungsmodul gilt z. B. jeweils eine eindeutige Zunahme mit Zunahme der Wasserspannungen. Mit Hilfe der Ergebnisse aus den Laborversuchen sowie numerischen Berechnungen des Was-serhaushaltes und der vorherrschenden Spannungen kann eine erste Rissgefährdungsabschätzung für mineralische Dichtungen in Oberflächenabdichtungen abgeleitet und angewandt werden. Weitere Erläuterungen z. B. zu den Eigenschaften und der Teilsättigung bindiger Böden, analytische Zugfestigkeitsberechnungen oder Empfehlungen zum Entwurf und der Herstellung von Oberflächenabdichtungen ergänzen die Arbeit. N2 - The long-term function of cover lining systems of landfills is endangered by desiccation and cracking of the compacted clay liner. The specific climate at the landfill location with its varying conditions (precipitation, temperature), plants and animals or also an inappropriate cover lining system are the causes of these phenomena. Dewatering and desiccation of compacted clay liners produce negative strains and after that strain rupture or cracking. The shrinkage behaviour and the tensile strength of a cover lining material are very important for its capacity. Both characteristics were examined by self-designed laboratory tests which were conducted on two typical cover lining materials. The results show a strong dependency on the suction and on the soil structure. The tensile strength as well as the derived E-modulus increase with increasing suction for example. A first estimation of cracking risk in compacted clay liners of cover lining systems can be derived and used by the presented laboratory test results, numeric calculations of the water balance and the predominant stresses. Further explanations as e. g. the characteristics and unsaturation of cohesive soils, analytic calculations of the tensile strength or recommendations to the design and the production of cover lining systems complete the thesis. KW - Deponiebau KW - Zugfestigkeit KW - Rissbildung KW - Wasserhaushalt KW - Oberflächenabdichtung KW - Teilsättigung KW - landfill cover lining system KW - tensile strength KW - cracking KW - unsaturation KW - water balance Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070522-8692 ER - TY - THES A1 - Schrader, Kai T1 - Algorithmische Umsetzung eines elasto-plastischen Kontakt-Materialgesetzes zur Abbildung der Rissflächen-Degradation bei kohäsiven Rissen N2 - Entwicklung eines Algorithmus für ein nichtlineares Materialgesetz für die vollautomatische Rissentwicklungssimulation unter Verwendung der am Institut für Strukturmechanik entwickelten netzfreien Verfahren. In Anlehnung an die Kontinuumsplastizität wird unter Verwendung einer arbeitsbasierten Formulierung mit Kombination der Mode I und Mode IIa Bruchenergien für sensitive Strukturen und eines nicht-assoziierten Fließgesetzes werden die Rissweggrößen (Rissöffnungsweite und Rissgleitungen) iterativ ermittelt. Dadurch ist es möglich, den Dilatanzeffekt sowie die verzahnte Kontaktfläche und die daraus resultierenden erhöhten Schubwiderstände abzubilden. Umsetzung mit Hilfe des sehr effizienten impliziten Closest Point Projection Iterationsverfahren auf Basis einer 3-D Kontaktformulierung (Kontakt-Elemente). 2-D Implementation in die Forschungssoftware SLang des Instituts für Strukturmechanik der Bauhaus-Universität Weimar. Verifikation der Modellcharakteristik mit signifikanten Belastungszuständen. Zwei Anwendungsbeispiele zur Rissfortschrittsberechnung sind unter Verwendung des umgesetzten Materialgesetzes zum Einsatz gekommen. Untersuchungen hinsichtlich der Materialparameter wurden vorgenommen. N2 - In this documentation a general model for combined normal/shear cracking will be presented. Basically it is defined of the normal and shear stresses of a cohesive crack with the corresponding displacements in normal and tangential direction. For the load state there can be considered three cases of loading: pure tension, shear-tension and shear-compression. In the softening state of quasi-brittle materials like concrete there are be mould physical effects like dilatancy by shearing deformations, nevertheless no dilatancy under very high compression can be performed. By this way it is additionally possible to simulate extended roughness at the contact surface besides the coulomb criteria as it exists in real cracking deformations of structures characterized by sensitive material behavior. To enable this goal in context of smeared crack analysis a special feature in combined activating Mode I and Mode II fracture energies (mixed mode cracking) is used. \\ After presenting this model a direct way for implementation as a constitutive law based for interface elements will be realized. Integrating this to the stochastic FE software SLang - The Structural Language some tests for verificating the interface model (by comparing the numerical results with existing experimental data) will be performed as well as discussing the cracking model with regard to practical aspects. KW - Dilatanz KW - Bruchzone KW - Rissbildung KW - plastische Formänderungsarbeit KW - nicht-assoziierte Fließfläche KW - Kontaktformulierung KW - Rissfortschrittsberechnung KW - dilatancy KW - mixed mode cracking KW - mode I KW - mode IIa KW - closest point projection Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6195 ER - TY - JOUR A1 - Minch, M. J. A1 - Trochanowski, A. T1 - The numerical Modelling and Analysis of RC cracked Structures N2 - The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown. KW - Tragwerk KW - Stahlbeton KW - Rissbildung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5278 ER - TY - CHAP A1 - Skrinar, Matjaz T1 - A simple FEM Beam Element with an Arbitrary Number of Cracks N2 - To fulfil safety requirements the changes in the static and/or dynamic behaviour of the structure must be analysed with great care. These changes are often caused by local reduction of the stiffness of the structure caused by the irregularities in the structure, as for example cracks. In simple structures such analysis can be performed directly, by solving equations of motion, but for more complex structures a different approach, usually numerical, must be applied. The problem of crack implementation into the structure behaviour has been studied by many authors who have usually modelled the crack as a massless rotational spring of suitable stiffness placed at the beam at the location where the crack occurs. Recently, the numerical procedure for the computation of the stiffness matrix for a beam element with a single transverse crack has been replaced with the element stiffness matrix written in fully symbolic form. A detailed comparison of the results obtained by using 200 2D finite elements with those obtained with a single cracked beam element has confirmed the usefulness of such element. KW - Finite-Elemente-Methode KW - Rissbildung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4287 ER - TY - CHAP A1 - Most, Thomas A1 - Bucher, Christian T1 - Application of the "fictious crack model" to meshless crack growth simulations N2 - In this paper a meshless component is presented, which internally uses the common meshless interpolation technique >Moving Least Squares<. In contrast to usual meshless integration schemes like the cell quadrature and the nodal integration in this study integration zones with triangular geometry spanned by three nodes are used for 2D analysis. The boundary of the structure is defined by boundary nodes, which are similar to finite element nodes. By using the neighborhood relations of the integration zones an efficient search algorithm to detected the nodes in the influence of the integration points was developed. The components are directly coupled with finite elements by using a penalty method. An widely accepted model to describe the fracture behavior of concrete is the >Fictitious Crack Model< which is applied in this study, which differentiates between micro cracks and macro cracks, with and without force transmission over the crack surface, respectively. In this study the crack surface is discretized by node pairs in form of a polygon, which is part of the boundary. To apply the >Fictitious Crack Model< finite interface elements are included between the crack surface nodes. The determination of the maximum principal strain at the crack tip is done by introducing an influence area around the singularity. On a practical example it is shown that the included elements improve the model by the transmission of the surface forces during monotonic loading and by the representation of the contact forces of closed cracks during reverse loading. KW - Bruchmechanik KW - Rissbildung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3359 ER - TY - CHAP A1 - Taha, M. M. Reda A1 - Sherif, Alaa A1 - Hegger, Josef T1 - A nouvelle approach for predicting the shear cracking angle in RC and PC beams using artificial neural networks N2 - The truss model for predicting shear resistance of reinforced concrete beams has usually been criticized because of its underestimation of the concrete shear strength especially for beams with low shear reinforcement. Two challengers are commonly encountered in any truss model and are responsible for its inaccurate shear strength prediction. First: the cracking angle is usually assumed empirically and second the shear contribution of the arching action is usually neglected. This research introduces a nouvelle approach, by using Artificial Neural Network (ANN) for accurately evaluating the shear cracking angle of reinforced and prestressed concrete beams. The model inputs include the beam geometry, concrete strength, the shear reinforcement ratio and the prestressing stress if any. ... KW - Neuronales Netz KW - Wasserbau KW - Scherung KW - Rissbildung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1071 ER - TY - THES A1 - Diener, Jörg T1 - Beitrag zur physikalisch und geometrisch nichtlinearen Berechnung langzeitbelasteter Bauteile aus Stahlbeton und Spannbeton unter besonderer Berücksichtigung des nichtlinearen Kriechens und der Rißbildung T1 - Physically and geometrically nonlinear analysis of reinforced and prestressed concrete members under sustained loads under consideration of nonlinear creep and cracking of concrete N2 - Der Schwerpunkt der Arbeit ist die Entwicklung eines Berechnungskonzeptes, mit dem die Auswirkungen des zeitabhängigen Materialverhaltens des Betons und der Spannbewehrung auf das Tragverhalten von Stahlbeton und Spannbetonbauteilen wirklichkeitsnah abgeschätzt werden können. Dabei wird auf die Berücksichtigung des nichtlinearen Kriechens und der Rißbildung besonderer Wert gelegt. Das Konzept basiert auf der sukzessiven Ermittlung der Schnittgrößenanteile und der Deformationen zu festgelegten Zeitpunkten, wobei die Ergebnisse der vorausgehenden Zeitschritte berücksichtigt werden können. Ausgehend von der Formulierung des mechanischen Problems als Extremalaufgabe wird die Berechnung innerhalb eines Zeitschritts auf die Lösung einer quadratischen Optimierungsaufgabe zurückgeführt, wobei die Rißbildung des Betons und geometrisch nichtlineare Einflüsse berücksichtigt werden können. Die Einbeziehung des nichtlinearen Kriechens erfolgt durch Beschleunigung der linearen Kriechgeschwindigkeit mit einem, von der aktuellen Betonspannung abhängigen Kriechzahlerhöhungsfaktor. Das Berechnungsmodell wird anhand von Langzeitversuchen an hochbelasteten Betonprismen und Stahlbetonstützen verifiziert. In umfangreichen numerischen Untersuchungen wird der Einfluß des nichtlinearen Kriechens auf das Tragverhalten von vorgespannten Querschnitten und Stahlbetonstützen analysiert. N2 - A strategy for the analysis of reinforced and prestressed concrete members under long-term loading is developed. The method allows the consideration of nonlinear creep and cracking of concrete. The concept based on the successive determination of internal forces and deformations to fixed time points. By this the results of the formrer time steps are considered. Starting from the formulation of the mechanical problem by an extremum principle the computation of a single time step is reduced to the solution of a quadratic optimization problem allowing for cracking of concrete and geometrically nonlinear effects. The nonlinear creep of concrete is taken into account by accelleration of the linear creep rate by a function depending on actual concrete stress. It will be shown that the model agrees satisfactory with long-term test data. By extensive numerical calculations the influence of nonlinear creep on the bearing resistance of reinforced concrete columns is investigated. KW - Stahlbetonbauteil KW - Kriechen KW - Rissbildung KW - Tragverhalten KW - Mathematisches Modell KW - Nichtlineare Mechanik KW - Optimierung KW - Schnittgrößenumlagerungen KW - nonlinear creep KW - cracking of concrete KW - physically and geometrically nonlinear computation KW - quadratical optimization Y1 - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040220-446 ER -