TY - JFULL ED - Engell, Lorenz ED - Siegert, Bernhard T1 - Schwerpunkt Operative Ontologien N2 - Die vorliegende Ausgabe der Zeitschrift für Medien- und Kulturforschung verdankt sich einem Experiment. In Experimenten, wenigstens soweit es sich zunächst um künstlerische und philosophische Prozeduren handelt, geht es, frei nach Jean-François Lyotard, darum, herauszufinden, welchen Regeln die Verfahren selbst folgen, während man sie bereits anwendet, während man also danach sucht, welchen Regeln man folgt. In eben diesem Sinne bemüht sich das vorliegende Heft um eine Klärung des Verfahrens »operativer Ontologien«. Während in der Kunst das Werk selbst als eine dynamische Instanz der experimentellen Prozedur gelten kann, haben die Herausgeber hier jedoch einen etwas anderen Weg eingeschlagen, indem sie nämlich verschiedene Texte in einem experimentellen Bezugsrahmen angefragt – und wunderbarerweise auch erhalten haben. Wunderbarerweise deshalb, weil sowohl in Philosophie und Kunst als auch in den Wissenschaften jedes Experiment nicht nur mit der Freude am Aufbauen und Einstellen der Apparaturen, Instrumente und Dispositive, am Basteln also, sondern auch mit erheblicher Zumutung und vielleicht einem kleinen Wagnis verbunden ist. Zudem ist zum Zeitpunkt seiner Unternehmung über seinen Ausgang noch nicht das Geringste bekannt. Im vorliegenden Fall, denn die Veröffentlichung ist selbstverständlich das eigentliche Experiment, wissen wir alle also bis jetzt nichts über den Ausgang. KW - Medienwissenschaft KW - Kulturwissenschaft Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48581 SN - 2366-0767 N1 - Lizenz CC-BY-NC-SA 3.0 VL - 2017 IS - 8.2017, Heft 2 PB - Felix Meiner Verlag CY - Hamburg ER - TY - JFULL ED - Engell, Lorenz ED - Siegert, Bernhard T1 - Schwerpunkt Inkarnieren N2 - Der Themenschwerpunkt des vorliegenden Heftes der Zeitschrift für Medien- und Kulturforschung wird bestritten von Autoren, die der DFG-Forschergruppe »Medien und Mimesis« angehören, die an der Bauhaus-Universität Weimar angesiedelt, aber zusätzlich über die Universitäten Basel, Bielefeld, Bochum, München und Zürich verteilt ist. Die Forschergruppe untersucht Mimesis als Kulturtechnik vor dem Hintergrund aktueller Entwicklungen in der Medienforschung, die Praktiken und Operationsketten als vorgängig gegenüber den aus ihnen hervorgehenden Subjekt-Objekt-Dichotomien bzw. Subjekt-Werkzeug-Artefakt-Kausalitäten ansehen. Die Auffassung von Mimesis als einer vielgestaltigen Kulturtechnik geht über die in den Kultur- und Literaturwissenschaften ebenso wie in der Philosophie dominierende ästhetische und epistemische Betrachtung der Mimesis hinaus und stellt das geschichtsphilosophische Selbstverständnis der Moderne als eine grundlegend a-mimetische kulturelle und soziale Formation infrage. Mimesis und imitatio werden nicht länger in die Perspektive einer zu ü berwindenden Vorgeschichte der Idee des schöpferischen Menschen und seiner Werkherrschaft gestellt (Blumenberg). Anstatt die Mimesis in einen Gegensatz zur modernen Technik und der auf ihr beruhenden Zivilisation zu manövrieren und das konstruktivistische Selbstverständnis der Neuzeit kulturell zu verallgemeinern und absolut zu setzen, gehen die Projekte der Forschergruppe auf unterschiedlichen Feldern den seinsverändernden, transformatorischen Wirkungen medial gekoppelter mimetischer Praktiken und Verhaltensweisen zwischen dem 15. und dem 21. Jahrhundert nach. ... KW - Medienwissenschaft KW - Kulturwissenschaft Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48579 SN - 2366-0767 N1 - Lizenz CC-BY-NC-SA 3.0 VL - 2017 IS - 8.2017, Heft 1 PB - Felix Meiner Verlag CY - Hamburg ER - TY - CHAP A1 - Kleiner, Florian A1 - Wiegand, Torben A1 - Osburg, Andrea T1 - Eigenschaftsentwicklung epoxidharzmodifizierter Mörtel auf Zementbasis bei unterschiedlichen klimatischen Bedingungen T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie, 18.-20. September 2017 in Weimar N2 - Zur Erstellung von dekorativen Plastiken sollten Mörtel entwickelt werden, die eine hohe Biegezugfestigkeit aufweisen und eine breite Palette von Konsistenzen für verschiedene Anwendungsarten, wie Gießen, Spachteln oder Stampfen abdecken. Als Basis für die Rezepturen wurde ein niedrigviskoses Epoxidharzsystem gewählt, dessen Aminhärter einen Wasseranteil von 44 % beinhaltet. Dies ermöglichte es, durch Wasserzugabe verschiedene Viskositäten einzustellen. Um dieses Wasser in massiveren Bauteilen zu binden, wurde neben Sand auch Zement als Füllstoff eingesetzt. Die erstellten Rezepturen zeigten nach 56 Tagen hohe Druckfestigkeiten von über 50 N/mm². Mit zunehmendem Epoxidharzgehalt ergaben sich zwar steigende Biegezugfestigkeiten, jedoch unter Laborlagerung auch größere Längenänderungen. Diese konnten durch den Einsatz eines PCE-Fließmittels, PVA-Kurzfasern und einer optimierten Sieblinie verringert werden. Das Fließmittel verlängerte die Erhärtungszeiten jedoch auf bis zu 1,5 Tage. Zur Ermittlung der Dauerhaftigkeit des Materials wurde es für drei Wochen Temperaturen von -20 bis +60 °C, einer künstlichen Sonnenbestrahlung sowie künstlicher Beregnung ausgesetzt. Im Vergleich zur Laborlagerung ergab sich bei steigendem Epoxidharzanteil ein geringerer Schwund, während die Biegezugfestigkeit der Probeköper nur geringfügig abnahm. Rasterelektronenmikroskopische Untersuchungen zeigten, dass auch bei geringeren Epoxidharzzusätzen Störungen der Zementhydratation auftraten. Weiterhin zeigen sich bei geringen Epoxidharzzusätzen in der Matrix kugelförmige Einschlüsse, die von dispergierten Epoxidharzpartikeln stammen. KW - Bauchemie KW - Mörtel KW - Epoxidharz KW - Dauerhaftigkeit Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211004-45067 SN - 978-3-947197-02-6 PB - Gesellschaft Deutscher Chemiker ER - TY - CHAP ED - Mai, Andreas T1 - Hochschulwege 2015 BT - Wie verändern Projekte die Hochschulen? N2 - Die in diesem Tagungsband zusammengeführten Beiträge beschäftigen sich mit dem Spannungsfeld, das sich zwischen externen Förderprogrammen, Veränderungsprojekten und den Zielen, Strukturen und Bedingungen der jeweiligen Hochschule ergibt. In diesem Spannungsfeld kommt es unweigerlich zu Reibungen, da vorhandene Strukturen und Ziele in Konflikt mit neuen Vorhaben und Ideen geraten. Ein Teil der Projekte stellt allein durch ihr finanzielles Volumen und die daraus resultierende Wirkkraft die tradierten Verhältnisse zwischen Lehre, Forschung und den wissenschaftsstützenden Bereichen in Frage und teils auf den Kopf. Die leitenden Fragen der Tagung und der hier versammelten Beiträge waren daher: Wie bringen Hochschulen ihre individuellen Ziele mit denen der bundesweiten Programme oder länderspezfifischer Fördermaßnahmen überein? Wie gehen Hochschulen mit ihren Projekten um? Wie vollzieht sich Veränderung an den Hochschulen? Und schließlich: Was bleibt von den Impulsen, die Projekte setzen? Die in diesem Tagungsband versammelten Beiträge geben darauf erste, auf dem bisherigen Erfahrungswissen basierende Antworten. Sie setzen sich intensiv mit den Faktoren auseinander, die den Erfolg von Veränderungsprozessen und Projekten befördern oder behindern können und leiten daraus Empfehlungen für Gestaltungsprozesse an Hochschulen ab. KW - Hochschule KW - Hochschulplanung KW - Projektmanagement KW - Hochschulentwicklung KW - Projektmanagement KW - Organisationsentwicklung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181130-38263 SN - 978-3-7439-1763-7 PB - tredition GmbH CY - Hamburg ER - TY - CHAP A1 - Schütz, Stephan T1 - Folded Cardboard Sandwiches for Load-bearing Architectural Components T2 - WSBE17 Hong Kong - Conference Proceedings N2 - The high resource demand of the building sector clearly indicates the need to search for alternative, renewable and energy-efficient materials. This work presents paper-laminated sandwich elements with a core of corrugated paperboard that can serve as architectural components with a load-bearing capacity after a linear folding process. Conventional methods either use paper tubes or glued layers of honeycomb panels. In contrast, the folded components are extremely lightweight, provide the material strength exactly where it is statically required and offer many possibilities for design variants. After removing stripes of the paper lamination, the sandwich can be folded in a linear way at this position. Without the resistance of the missing paper, the sandwich core can be easily compressed. The final angle of the folding correlates with the width of the removed paper stripe. As such, this angle can be described by a simple geometric equation. The geometrical basis for the production of folded sandwich elements was established and many profile types were generated such as triangular, square or rectangular shapes. The method allows the easy planning and fast production of components that can be used in the construction sector. A triangle profile was used to create a load-bearing frame as supporting structure for an experimental building. This first permanent building completely made of corrugated cardboard was evaluated in a two-year test to confirm the efficiency of the developed components. In addition to the frame shown in this paper, large-scale sandwich elements with a core of folded components can be used to fabricate lightweight ceilings and large-scale sandwich components. The method enables the efficient production of linearly folded cardboard elements which can replace normal wooden components like beams, pillars or frames and bring a fully recycled material in the context of architectural construction. KW - Tragendes Teil KW - Platte KW - Sandwichbauteil KW - Papierware KW - Wellpappe KW - Sustainable construction technology KW - Adaptable design KW - Folded components KW - Corrugated cardboard sandwich KW - Architecture Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181029-38052 UR - http://www.wsbe17hongkong.hk/download/WSBE17%20Hong%20Kong%20-%20Conference%20Proceedings.pdf SN - 978-988-77943-0-1 PB - Construction Industry Council, Hong Kong Green Building Council Limited CY - Hong Kong ER - TY - THES A1 - Hollberg, Alexander T1 - A parametric method for building design optimization based on Life Cycle Assessment N2 - The building sector is responsible for a large share of human environmental impacts. Architects and planners are the key players for reducing the environmental impacts of buildings, as they define them to a large extent. Life Cycle Assessment (LCA) allows for the holistic environmental analysis of a building. However, it is currently not employed to improve the environmental performance of buildings during the design process, although the potential for optimization is greatest there. One main reason is the lack of an adequate means of applying LCA in the architectural design process. As such, the main objective of this thesis is to develop a method for environmental building design optimization that is applicable in the design process. The key concept proposed in this thesis is to combine LCA with parametric design, because it proved to have a high potential for design optimization. The research approach includes the analysis of the characteristics of LCA for buildings and the architectural design stages to identify the research gap, the establishment of a requirement catalogue, the development of a method based on a digital, parametric model, and an evaluation of the method. An analysis of currently available approaches for LCA of buildings indicates that they are either holistic but very complex or simple but not holistic. Furthermore, none of them provide the opportunity for optimization in the architectural design process, which is the main research gap. The requirements derived from the analysis have been summarized in the form of a catalogue. This catalogue can be used to evaluate both existing approaches and potential methods developed in the future. In this thesis, it served as guideline for the development of the parametric method – Parametric Life Cycle Assessment (PLCA). The unique main feature of PLCA is that embodied and operational environmental impact are calculated together. In combination with the self-contained workflow of the method, this provides the basis for holistic, time-efficient environmental design optimization. The application of PLCA to three examples indicated that all established mandatory requirements are met. In all cases, environmental impact could be significantly reduced. In comparison to conventional approaches, PLCA was shown to be much more time-efficient. PLCA allows architects to focus on their main task of designing the building, and finally makes LCA practically useful as one of several criteria for design optimization. With PLCA, the building design can be time-efficiently optimized from the beginning of the most influential early design stages, which has not been possible until now. PLCA provides a good starting point for further research. In the future, it could be extended by integrating the social and economic aspects of sustainability. T3 - bauhaus.ifex research series - 4 KW - Bauentwurf KW - Architektur KW - Bauökologie KW - Nachhaltigkeit KW - Life Cycle Assessment KW - Parametric Design KW - Building Information Modelling KW - BIM KW - Optimization Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180928-38000 ER - TY - JOUR A1 - Zander, Steffi A1 - Wetzel, Stefanie A1 - Kühl, Tim A1 - Bertel, Sven T1 - Underlying Processes of an Inverted Personalization Effect in Multimedia Learning – An Eye-Tracking Study JF - Frontiers in Psychology N2 - One of the frequently examined design principles recommendations in multimedia learning is the personalization principle. Based on empirical evidence this principle states that using personalised messages in multimedia learning is more beneficial than using formal language (e.g. using ‘you’ instead of ‘the’). Although there is evidence that these slight changes in regard to the language style affect learning, motivation and the perceived cognitive load, it remains unclear, (1) whether the positive effects of personalised language can be transferred to all kinds of content of learning materials (e.g. specific potentially aversive health issues) and (2) which are the underlying processes (e.g. attention allocation) of the personalization effect. German university students (N= 37) learned symptoms and causes of cerebral haemorrhages either with a formal or a personalised version of the learning material. Analysis revealed comparable results to the few existing previous studies, indicating an inverted personalization effect for potentially aversive learning material. This effect was specifically revealed in regard to decreased average fixation duration and the number of fixations exclusively on the images in the personalised compared to the formal version. This result can be seen as indicators for an inverted effect of personalization on the level of visual attention. KW - Lernen KW - multimedia learning KW - Computerunterstütztes Lernen KW - Multimedia KW - personalization effect KW - eye-tracking KW - cognitive load KW - multimedia design principles KW - OA-Publikationsfonds2017 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180312-37342 UR - https://www.frontiersin.org/articles/10.3389/fpsyg.2017.02202/full VL - 2017 IS - Volume 8, Article 2202 SP - 1 EP - 16 ER - TY - JOUR A1 - Eckardt, Frank T1 - Kassel ohne Athen: die documenta 14 zerbricht an ihrer Ortslosigkeit JF - sub/urban. Zeitschrift für kritische Stadtforschung N2 - Dieser Artikel analysiert, in welcher Weise sich die Weltkunstausstellung documenta 14 mit dem öffentlichen Raum in Kassel auseinandersetzte. Als Kritik an globalen Unrechtszuständen konzipiert, ging die diesjährige Documenta nicht auf die lokalen Umstände in Kassel ein und benutzte die Stadt stattdessen als Bühne. Statt sich mit den konkreten Prozessen vor Ort auseinanderzusetzen, wie die Ausstellung dies in Athen getan hat, wird die Tradition der Documenta gebrochen, einen Beitrag zur gesellschaftlichen Stadtentwicklung leisten zu wollen. KW - Kassel / Documenta KW - Ortslosigkeit KW - OA-Publikationsfonds2017 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171219-37152 UR - http://www.zeitschrift-suburban.de/sys/index.php/suburban/issue/view/36 VL - 2017 IS - Band 5, Heft 3 SP - 157 EP - 166 ER - TY - THES A1 - Wenzel, Jakob T1 - Design and Analysis of Cryptographic Algorithms for Authentication N2 - During the previous decades, the upcoming demand for security in the digital world, e.g., the Internet, lead to numerous groundbreaking research topics in the field of cryptography. This thesis focuses on the design and analysis of cryptographic primitives and schemes to be used for authentication of data and communication endpoints, i.e., users. It is structured into three parts, where we present the first freely scalable multi-block-length block-cipher-based compression function (Counter-bDM) in the first part. The presented design is accompanied by a thorough security analysis regarding its preimage and collision security. The second and major part is devoted to password hashing. It is motivated by the large amount of leaked password during the last years and our discovery of side-channel attacks on scrypt – the first modern password scrambler that allowed to parameterize the amount of memory required to compute a password hash. After summarizing which properties we expect from a modern password scrambler, we (1) describe a cache-timing attack on scrypt based on its password-dependent memory-access pattern and (2) outline an additional attack vector – garbage-collector attacks – that exploits optimization which may disregard to overwrite the internally used memory. Based on our observations, we introduce Catena – the first memory-demanding password-scrambling framework that allows a password-independent memory-access pattern for resistance to the aforementioned attacks. Catena was submitted to the Password Hashing Competition (PHC) and, after two years of rigorous analysis, ended up as a finalist gaining special recognition for its agile framework approach and side-channel resistance. We provide six instances of Catena suitable for a variety of applications. We close the second part of this thesis with an overview of modern password scramblers regarding their functional, security, and general properties; supported by a brief analysis of their resistance to garbage-collector attacks. The third part of this thesis is dedicated to the integrity (authenticity of data) of nonce-based authenticated encryption schemes (NAE). We introduce the so-called j-IV-Collision Attack, allowing to obtain an upper bound for an adversary that is provided with a first successful forgery and tries to efficiently compute j additional forgeries for a particular NAE scheme (in short: reforgeability). Additionally, we introduce the corresponding security notion j-INT-CTXT and provide a comparative analysis (regarding j-INT-CTXT security) of the third-round submission to the CAESAR competition and the four classical and widely used NAE schemes CWC, CCM, EAX, and GCM. N2 - Die fortschreitende Digitalisierung in den letzten Jahrzehnten hat dazu geführt, dass sich das Forschungsfeld der Kryptographie bedeutsam weiterentwickelt hat. Diese, im Wesentlichen aus drei Teilen bestehende Dissertation, widmet sich dem Design und der Analyse von kryptographischen Primitiven und Modi zur Authentifizierung von Daten und Kommunikationspartnern. Der erste Teil beschäftigt sich dabei mit blockchiffrenbasierten Kompressionsfunktionen, die in ressourcenbeschränkten Anwendungsbereichen eine wichtige Rolle spielen. Im Rahmen dieser Arbeit präsentieren wir die erste frei skalierbare und sichere blockchiffrenbasierte Kompressionsfunktion Counter-bDM und erweitern somit flexibel die erreichbare Sicherheit solcher Konstruktionen. Der zweite Teil und wichtigste Teil dieser Dissertation widmet sich Passwort-Hashing-Verfahren. Zum einen ist dieser motiviert durch die große Anzahl von Angriffen auf Passwortdatenbanken großer Internet-Unternehmen. Zum anderen bot die Password Hashing Competition (PHC) die Möglichkeit, unter Aufmerksamkeit der Expertengemeinschaft die Sicherheit bestehender Verfahren zu hinterfragen, sowie neue sichere Verfahren zu entwerfen. Im Rahmen des zweiten Teils entwarfen wir Anforderungen an moderne Passwort-Hashing-Verfahren und beschreiben drei Arten von Seitenkanal-Angriffen (Cache-Timing-, Weak Garbage-Collector- und Garbage-Collector-Angriffe) auf scrypt – das erste moderne Password-Hashing-Verfahren welches erlaubte, den benötigten Speicheraufwand zur Berechnung eines Passworthashes frei zu wählen. Basierend auf unseren Beobachtungen und Angriffen, stellen wir das erste moderne PasswordHashing-Framework Catena vor, welches für gewählte Instanzen passwortunabhängige Speicherzugriffe und somit Sicherheit gegen oben genannte Angriffe garantiert. Catena erlangte im Rahmen des PHC-Wettbewerbs besondere Anerkennung für seine Agilität und Resistenz gegen SeitenkanalAngriffe. Wir präsentieren sechs Instanzen des Frameworks, welche für eine Vielzahl von Anwendungen geeignet sind. Abgerundet wird der zweite Teil dieser Arbeit mit einem vergleichenden Überblick von modernen Passwort-Hashing-Verfahren hinsichtlich ihrer funktionalen, sicherheitstechnischen und allgemeinen Eigenschaften. Dieser Vergleich wird unterstützt durch eine kurze Analyse bezüglich ihrer Resistenz gegen (Weak) Garbage-Collector-Angriffe. Der dritte teil dieser Arbeit widmet sich der Integrität von Daten, genauer, der Sicherheit sogenannter Nonce-basierten authentisierten Verschlüsselungsverfahren (NAE-Verfahren), welche ebenso wie Passwort-Hashing-Verfahren in der heutigen Sicherheitsinfrastruktur des Internets eine wichtige Rolle spielen. Während Standard-Definitionen keine Sicherheit nach dem Fund einer ersten erfolgreich gefälschten Nachricht betrachten, erweitern wir die Sicherheitsanforderungen dahingehend wie schwer es ist, weitere Fälschungen zu ermitteln. Wir abstrahieren die Funktionsweise von NAEVerfahren in Klassen, analysieren diese systematisch und klassifizieren die Dritt-Runden-Kandidaten des CAESAR-Wettbewerbs, sowie vier weit verbreitete NAE-Verfahren CWC, CCM, EAX und GCM. KW - Kryptologie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171208-37140 ER - TY - THES A1 - Hahn, Sönke T1 - Bunker—TV, TV—Bunker: Heterotope Mechanismen am Beispiel von Schutzbauwerken und (Fernseh-)Serien N2 - Die vorliegende Dissertation widmet sich anhand eines kurios anmutenden, aber auf einer Metaebene fruchtbaren Vergleichs von Schutzbauwerken und Fernsehserien historischen und aktuellen Mechanismen menschlichen Denkens und Handelns. Als theoretische Basis dieser Abhandlung fungiert die Heterotopie – ein Konzept des französischen Philosophen Michel Foucault. Die Heterotopie ist ein inflationär gebrauchtes, oft nur oberflächlich betrachtetes Theorem. Das Konzept wird hier nun mit Blick auf das Gesamtwerk Foucaults en détail untersucht sowie um korrelierende Ansätze (Augé, Lefebvre, Soja ...) ergänzt. Aus dieser Betrachtung lässt sich ein über Foucault hinausgehender, analytisch nutzbarer Katalog ableiten. Verkürzt wird die Heterotopie folgendermaßen bestimmt: Neben der Definition der Heterotopie als Raum des Anderen, als (gesellschaftskritischer) Gegenraum kann sie dem wie auch immer bestimmten Normalraum unterstellt sein. Die Heterotopie ist möglicherweise eine bauliche Manifestation schwarz-weißen Denkens, von Ausgrenzung und sichtbarer Unsichtbarkeit, sie wird zur Realisation wie auch immer definierter Ideale oder Stereotypen. Die Heterotopie ist allerdings auch als ein (hybrides) Dazwischen denkbar, welches sich als katalytischer Raum, im dialektischen Sinne als Ort der Synthese äußert. Es könnte als Niemandsland oder als Phase (im Leben) charakterisiert werden. Analog zum letzten Beispiel lässt sich die Heterotopie als progressiv-seriell beschreiben. Ihre stagnierend bis variierende Serialität kann sich im Betreten identischer Räume äußern – mal als verlässlich oder ermüdend empfunden. Nicht nur die einem entsprechenden Raum entgegengebrachten Konnotationen sind vielfältig bis ambivalent, die Heterotopie ist neben real-räumlicher auch virtueller Fasson: Betonmauer finden bisweilen eine Entsprechung im einfachen Harmoniefernsehen. Einander heterotop gegenüberstehenden Räumen wird etwa mit der Figur Walter White in der komplexen Fernsehserie "Breaking Bad" entsprochen – ist er doch hin und her gerissen zwischen seiner biederen, aber geliebten Familie einerseits und der abstoßend gewalttätigen, aber extrovertierende Potentiale bergenden Drogenproduktion andererseits. Die sogenannte Leihkörperschaft bzw. die Immersion lassen sich zur Beschreibung verschiedener Heterotopie-Erfahrungen nutzen. Dieses Eintauchen/Betreten wird hier als Rezeptionsphänomen zwischen sensomotorischer Illusion und inhaltlich-narrativem Sog, zw. Fixierung des Körpers und Einbezug desselbigen definiert. Die beiden Untersuchungsfelder werden jeweils für sich historisch und theoretisch umrissen. Zum noch jungen Feld serieller Theorie/der Definition narrativer Typen (im TV bzw. dem Qualitätsfernsehen) wird ein einführender Überblick geboten. Die praktischen Arbeiten setzen sich ästhetisch, narrativ und inhaltlich mit der Heterotopie auseinander: In "Habitat" und "Habitat 2" werden serielle Konzepte audiovisuell (u. a. als Fulldome-Version) erprobt. Dabei wird insbesondere das Heterotope im Konzept "Autor" untersucht – der Autor als distinkte und gleichsam konfliktbehaftete, in zahlreiche Subjekte zerlegte Figur. "Habitat 3" ist ein Publikationskonzept, welches mit etablierten (heterotopen) Strukturen des Sammelbands bricht und zugleich die heterotopen Facetten des fiktionalen Fernsehens simuliert. Band I beinhaltet sowohl den theoretischen Teil der Promotion als auch die Erläuterung der praktischen Arbeiten. Band II ermöglicht einen Einblick in die konzeptionellen Prozesse hinter den drei künstlerischen Projekten. KW - Heterotopie KW - Bunker KW - Narrativität KW - TV-Serie KW - Serialität KW - Narration KW - Immersion KW - Quality TV KW - Fernsehserie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171205-37116 ER - TY - THES A1 - Podlaszewska, Rizky Suci Ammalia T1 - The Placemaking of Destination. Localization and Commoditization process of Urban Tourism. Study case Palembang Indonesia N2 - This research addresses the discourse of tourism as a tool for place-making of urban destination. Relevant to the study of place-making is the analysis of the commoditization and localization process dependent upon the appropriation of urban landscape and local cultures. In the research, localization is interpreted as the act of determining the attributes of locality, while commoditization is defined as the process by which local attributes that have commercial potential end up in becoming tourism commodity. Following this, the commoditization of intrinsic cultural value is disseminated within a branding strategy and intervention reflecting social and political relations. Therefore, the research suggests that tourism place-making has not only been constructed through the top-down regulatory body, but has been also generated through the attributes of its locality. By utilizing the critical and constructivist paradigm, the research depicts the conditions of the localization and commoditization process in establishing the base line of its realization within the symbolic economy. Thus, a qualitative case study approach was adopted. The study area of this dissertation is Palembang, as one of the capital cities in Indonesia advancing in its overall urban development. To investigate urban tourism as a tool for development strategy, it is useful to investigate the role of tourism which embodies (1) spatial transformation; how tourism gives significant impacts on urban form, and (2) the socio-cultural aspect; how neighbourhood is related to tourism industry. The findings suggest that tourism place-making involves the reciprocity of urban dynamics: cities take on tourism as a reference model of development, and tourist areas adopt the proliferation of cultural lifestyle to meet the industry’s demands. KW - Urbanistik Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171201-36995 ER - TY - JOUR A1 - Eckardt, Frank T1 - Sich in der ‚Krise’ einrichten? Rezension zu Jörg Friedrich, Peter Haslinger, Somon Takasaki und Valentina Forsch (Hg.) (2017): Zukunft: Wohnen. Migration als Impuls für die kooperative Stadt. Berlin: jovis. JF - sub/urban. Zeitschrift für kritische Stadtforschung N2 - Das rezensierte Buch stellt die zweite Publikation von Jörg Friedrich und seinem Team zum Thema Architektur und Flüchtlinge dar. Darin werden vor allem Entwurfsvorschläge für eine hybride Stadt vorgestellt, für die eine multifunktionale Nutzung von Raum als Grundidee vorgeschlagen wird. Zudem diskutieren konzeptionelle Beiträge des Bandes, wie nach der ‚Willkommenskultur’ im Jahr 2015 eine längerfristige Perspektive für Integration eingenommen werden kann. Der Band fordert ein größeres Engagement der Architektur und einen interdisziplinären Diskurs ein, der sich der vielfältigen Aufgaben der Flüchtlingsintegration annimmt. KW - Stadtforschung KW - Flüchtlinge KW - OA-Publikationsfonds2017 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171130-37139 UR - http://www.zeitschrift-suburban.de/sys/index.php/suburban/issue/view/36 VL - 2017 IS - Band 5, Heft 3 SP - 181 EP - 184 ER - TY - JOUR A1 - Vollmer, Lisa T1 - Keine Angst vor Alternativen. Ein neuer Munizipalismus JF - sub\urban. zeitschrift für kritische stadtforschung N2 - Die Idee eines neuen Munizipalismus wird in den linken sozialen Bewegungen Europas und darüber hinaus breit diskutiert. Munizipalistische Bewegungen streben es an, kommunale Regierungen zu übernehmen oder zu beeinflussen, um lokale Institutionen (wieder) gemeinwohlorientiert auszurichten, ein neues Verhältnis zwischen kommunalen Regierungen und sozialen Bewegungen zu schaffen und so die Art wie Politik gestaltet wird von unten her zu demokratisieren und institutionelle Rahmenbedingungen zu verändern. Sie entstehen in Reaktion auf die aktuelle ökonomische und politische Krise – ebenso wie neue rechte und rechtspopulistische Bewegungen, als deren Gegenpart sie sich verstehen. Mit Mut und konkreten Utopien will man der multiplen städtischen Krise begegnen, statt mit Angst und Angstmacherei wie rechte Bewegungen. Deshalb trafen sich im Juni 2017 über 600 Vertreter_innen dieser munizipalistischen Bewegungen auf Einladung Barcelona en Comús. KW - Stadtforschung KW - OA-Publikationsfonds2017 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171130-37124 UR - http://zeitschrift-suburban.de/sys/index.php/suburban/article/view/305 VL - 2017 IS - Band 5, Heft 3 SP - 147 EP - 156 ER - TY - THES A1 - Nariman, Nazim T1 - Numerical Methods for the Multi-Physical Analysis of Long Span Cable-Stayed Bridges N2 - The main categories of wind effects on long span bridge decks are buffeting, flutter, vortex-induced vibrations (VIV) which are often critical for the safety and serviceability of the structure. With the rapid increase of bridge spans, research on controlling wind-induced vibrations of long span bridges has been a problem of great concern.The developments of vibration control theories have led to the wide use of tuned mass dampers (TMDs) which has been proven to be effective for suppressing these vibrations both analytically and experimentally. Fire incidents are also of special interest in the stability and safety of long span bridges due to significant role of the complex phenomenon through triple interaction between the deck with the incoming wind flow and the thermal boundary of the surrounding air. This work begins with analyzing the buffeting response and flutter instability of three dimensional computational structural dynamics (CSD) models of a cable stayed bridge due to strong wind excitations using ABAQUS finite element commercial software. Optimization and global sensitivity analysis are utilized to target the vertical and torsional vibrations of the segmental deck through considering three aerodynamic parameters (wind attack angle, deck streamlined length and viscous damping of the stay cables). The numerical simulations results in conjunction with the frequency analysis results emphasized the existence of these vibrations and further theoretical studies are possible with a high level of accuracy. Model validation is performed by comparing the results of lift and moment coefficients between the created CSD models and two benchmarks from the literature (flat plate theory) and flat plate by (Xavier and co-authors) which resulted in very good agreements between them. Optimum values of the parameters have been identified. Global sensitivity analysis based on Monte Carlo sampling method was utilized to formulate the surrogate models and calculate the sensitivity indices. The rational effect and the role of each parameter on the aerodynamic stability of the structure were calculated and efficient insight has been constructed for the stability of the long span bridge. 2D computational fluid dynamics (CFD) models of the decks are created with the support of MATLAB codes to simulate and analyze the vortex shedding and VIV of the deck. Three aerodynamic parameters (wind speed, deck streamlined length and dynamic viscosity of the air) are dedicated to study their effects on the kinetic energy of the system and the vortices shapes and patterns. Two benchmarks from the literature (Von Karman) and (Dyrbye and Hansen) are used to validate the numerical simulations of the vortex shedding for the CFD models. A good consent between the results was detected. Latin hypercube experimental method is dedicated to generate the surrogate models for the kinetic energy of the system and the generated lift forces. Variance based sensitivity analysis is utilized to calculate the main sensitivity indices and the interaction orders for each parameter. The kinetic energy approach performed very well in revealing the rational effect and the role of each parameter in the generation of vortex shedding and predicting the early VIV and the critical wind speed. Both one-way fluid-structure interaction (one-way FSI) simulations and two-way fluid-structure interaction (two-way FSI) co-simulations for the 2D models of the deck are executed to calculate the shedding frequencies for the associated wind speeds in the lock-in region in addition to the lift and drag coefficients. Validation is executed with the results of (Simiu and Scanlan) and the results of flat plate theory compiled by (Munson and co-authors) respectively. High levels of agreements between all the results were detected. A decrease in the critical wind speed and the shedding frequencies considering (two-way FSI) was identified compared to those obtained in the (one-way FSI). The results from the (two-way FSI) approach predicted appreciable decrease in the lift and drag forces as well as prediction of earlier VIV for lower critical wind speeds and lock-in regions which exist at lower natural frequencies of the system. These conclusions help the designers to efficiently plan and consider for the design and safety of the long span bridge before and after construction. Multiple tuned mass dampers (MTMDs) system has been applied in the three dimensional CSD models of the cable stayed bridge to analyze their control efficiency in suppressing both wind -induced vertical and torsional vibrations of the deck by optimizing three design parameters (mass ratio, frequency ratio and damping ratio) for the (TMDs) supporting on actual field data and minimax optimization technique in addition to MATLAB codes and Fast Fourier Transform technique. The optimum values of each parameter were identified and validated with two benchmarks from the literature, first with (Wang and co-authors) and then with (Lin and co-authors). The validation procedure detected a good agreement between the results. Box-Behnken experimental method is dedicated to formulate the surrogate models to represent the control efficiency of the vertical and torsional vibrations. Sobol's sensitivity indices are calculated for the design parameters in addition to their interaction orders. The optimization results revealed better performance of the MTMDs in controlling both the vertical and the torsional vibrations for higher mode shapes. Furthermore, the calculated rational effect of each design parameter facilitates to increase the control efficiency of the MTMDs in conjunction with the support of the surrogate models which simplifies the process of analysis for vibration control to a great extent. A novel structural modification approach has been adopted to eliminate the early coupling between the bending and torsional mode shapes of the cable stayed bridge. Two lateral steel beams are added to the middle span of the structure. Frequency analysis is dedicated to obtain the natural frequencies of the first eight mode shapes of vibrations before and after the structural modification. Numerical simulations of wind excitations are conducted for the 3D model of the cable stayed bridge. Both vertical and torsional displacements are calculated at the mid span of the deck to analyze the bending and the torsional stiffness of the system before and after the structural modification. The results of the frequency analysis after applying lateral steel beams declared that the coupling between the vertical and torsional mode shapes of vibrations has been removed to larger natural frequencies magnitudes and higher rare critical wind speeds with a high factor of safety. Finally, thermal fluid-structure interaction (TFSI) and coupled thermal-stress analysis are utilized to identify the effects of transient and steady state heat-transfer on the VIV and fatigue of the deck due to fire incidents. Numerical simulations of TFSI models of the deck are dedicated to calculate the lift and drag forces in addition to determining the lock-in regions once using FSI models and another using TFSI models. Vorticity and thermal fields of three fire scenarios are simulated and analyzed. The benchmark of (Simiu and Scanlan) is used to validate the TFSI models, where a good agreement was manifested between the two results. Extended finite element method (XFEM) is adopted to create 3D models of the cable stayed bridge to simulate the fatigue of the deck considering three fire scenarios. The benchmark of (Choi and Shin) is used to validate the damaged models of the deck in which a good coincide was seen between them. The results revealed that the TFSI models and the coupled thermal-stress models are significant in detecting earlier vortex induced vibration and lock-in regions in addition to predicting damages and fatigue of the deck and identifying the role of wind-induced vibrations in speeding up the damage generation and the collapse of the structure in critical situations. KW - Stabilität KW - Brückenbau KW - Aerodynamic Stability KW - Vortex Induced Vibration KW - Fluid-Structure Interaction KW - Mass Tuned Damper KW - Thermal Fluid-Structure Interaction Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171122-37105 ER - TY - THES A1 - Ehrhardt, Dirk T1 - ZUM EINFLUSS DER NACHBEHANDLUNG AUF DIE GEFÜGEAUSBILDUNG UND DEN FROST-TAUMITTELWIDERSTAND DER BETONRANDZONE N2 - Die Festigkeitsentwicklung des Zementbetons basiert auf der chemischen Reaktion des Zementes mit dem Anmachwasser. Durch Nachbehandlungsmaßnahmen muss dafür gesorgt werden, dass dem Zement genügend Wasser für seine Reaktion zur Verfügung steht, da sonst ein Beton mit minderer Qualität entsteht. Die vorliegende Arbeit behandelt die grundsätzlichen Fragen der Betonnachbehandlung bei Anwendung von Straßenbetonen. Im Speziellen wird die Frage des erforderlichen Nachbehandlungsbedarfs von hüttensandhaltigen Kompositzementen betrachtet. Die Wirkung der Nachbehandlung wird anhand des erreichten Frost-Tausalz-Widerstandes und der Gefügeausbildung in der unmittelbaren Betonrandzone bewertet. Der Fokus der Untersuchungen lag auf abgezogenen Betonoberflächen. Es wurde ein Modell zur Austrocknung des jungen Betons erarbeitet. Es konnte gezeigt werden, dass in einer frühen Austrocknung (Kapillarphase) keine kritische Austrocknung der Betonrandzone einsetzt, sondern der Beton annährend gleichmäßig über die Höhe austrocknet. Es wurde ein Nomogramm entwickelt, mit dem die Dauer der Kapillarphase in Abhängigkeit der Witterung für Straßenbetone abgeschätzt werden kann. Eine kritische Austrocknung der wichtigen Randzone setzt nach Ende der Kapillarphase ein. Für Betone unter Verwendung von Zementen mit langsamer Festigkeitsentwicklung ist die Austrocknung der Randzone nach Ende der Kapillarphase besonders ausgeprägt. Im Ergebnis zeigen diese Betone dann einen geringen Frost-Tausalz-Widerstand. Mit Zementen, die eine 2d-Zementdruckfestigkeit ≥ 23,0 N/mm² aufweisen, wurde unabhängig von der Zementart (CEM I oder CEM II/B-S) auch dann ein hoher Frost-Tausalz-Widerstand erreicht, wenn keine oder eine schlechtere Nachbehandlung angewendet wurde. Für die Praxis ergibt sich damit eine einfache Möglichkeit der Vorauswahl von geeigneten Zementen für den Verkehrsflächenbau. Betone, die unter Verwendung von Zementen mit langsamere Festigkeitsentwicklung hergestellt werden, erreichen einen hohen Frost-Tausalz-Widerstand nur mit einer geeigneten Nachbehandlung. Die Anwendung von flüssigen Nachbehandlungsmitteln (NBM gemäß TL NBM-StB) erreicht eine ähnliche Wirksamkeit wie eine 5 tägige Feuchtnachbehandlung. Voraussetzung für die Wirksamkeit der NBM ist, dass sie auf eine Betonoberfläche ohne sichtbaren Feuchtigkeitsfilm (feuchter Glanz) aufgesprüht werden. Besonders wichtig ist die Beachtung des richtigen Auftragszeitpunktes bei kühler Witterung, da hier aufgrund der verlangsamten Zementreaktion der Beton länger Anmachwasser abstößt. Ein zu früher Auftrag des Nachbehandlungsmittels führt zu einer Verschlechterung der Qualität der Betonrandzone. Durch Bereitstellung hydratationsabhängiger Transportkenngrößen (Feuchtetransport im Beton) konnten numerische Berechnungen zum Zusammenspiel zwischen der Austrocknung, der Nachbehandlung und der Gefügeentwicklung durchgeführt werden. Mit dem erstellten Berechnungsmodell wurden Parameterstudien durchgeführt. Die Berechnungen bestätigen die wesentlichen Erkenntnisse der Laboruntersuchungen. Darüber hinaus lässt sich mit dem Berechnungsmodell zeigen, dass gerade bei langsam reagierenden Zementen und kühler Witterung ohne eine Nachbehandlung eine sehr dünne Randzone (ca. 500 µm – 1000 µm) mit stark erhöhter Kapillarporosität entsteht. N2 - The hardening of cement concrete is based on the chemical reaction of cement and water. Therefore, the ensuring of sufficient amount of water in concrete is essential. All these measures are referred as curing of concrete. This dissertation provides a basic consideration of curing of concrete for concrete pavements. In this regard the using of cements with slow strength development, e.g. cements with blast furnace slag is the main topic. The effectiveness of curing was evaluated on the basis of the freeze-thaw de-icing resistance and the microstructure of hardened outer concrete surface. Concrete surfaces with textured mortar are on the focus. The results were used to develope a model of the drying of young concrete. It could be shown, that the outer concrete surface does not dry during the first drying phase (called capillary phase). Instead the concrete is drying evenly over the high of the concrete sample during the capillary drying phase. A fast drying of the outer concrete surface only takes place after the capillary drying phase. Based on all results a nomogram (for road concrete) was created for an estimation of the duration of the capillary drying phase. If there is no curing after the capillary drying phase the concrete with use of slowly reacting cement has a great risk for a harmful drying of outer concrete surface. In this case such a concrete shows a very poor freeze thaw de-icing resistance. By using cements with a 2 day-compressive strength ≥ 23,0 N/mm² a good freeze thaw de-icing resistance could assure, despite no or a poor curing was applied. This criterion can be used to estimate the usability of cements with granulated blast furnace slag when a great freeze thaw de-icing resistance is essential. There could also be used a cement with lower 2 day-compressive strength. In this case a good curing has to be assured. Spraying of liquid curing compounds according to TL NBM-StB is suitable for curing concrete pavements. The curing compound should not be sprayed on a concrete surface with any visible water film. The effectiveness of curing compounds is equal to a five days long wet curing in consideration of applying the curing compound at the right time. Otherwise there is some negative influence when the spraying of curing compounds starts too early. Consideration about the right application time of curing compounds is more important for low temperatures because the concrete bleeds much longer due to the slower cement reaction at low temperatures. It was possible to create a numerical model which accounts the interaction between drying, curing and development of microstructure by providing hydration dependent transport parameters (water transport in concrete). The model was used for a parameter study. It could be shown that the combination of cements with slow strength development and low ambient temperatures leads to a thin surface zone (500 µm – 1000 µm) with very high capillary porosity. KW - Beton KW - Zement KW - Nachbehandlung KW - Modellbildung KW - Nachbehandlungsmittel KW - Straßenbeton KW - Frost-Tausalz-Widerstand KW - curing compounds KW - concrete pavements Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171120-36889 ER - TY - JOUR A1 - Vogl, Joseph T1 - Über Axel Maliks "skripturale Methode" N2 - Vortrag, gehalten am 20.08.2017 zur Eröffnung der Ausstellung "Die Bibliothek der unlesbaren Zeichen" im Audimax der Bauhaus-Universität Weimar T3 - Neue Bauhausvorträge - 3 KW - Kunst KW - Grafik Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171130-36683 ER - TY - JOUR A1 - Speitkamp, Winfried T1 - Identität durch Erbe? Historische Jubiläen und Jahrestage in der Erinnerungskultur N2 - Vortrag, gehalten am 13.12.2016 im Rahmen der Ringvorlesung des Graduiertenkollegs "Identität und Erbe" an der Bauhaus-Universität Weimar T3 - Neue Bauhausvorträge - 2 KW - Kulturerbe KW - Identität Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171130-36467 ER - TY - THES A1 - Meyer-Kohlstock, Daniel T1 - Prospects for Biochar in a Bio-Waste Cascade N2 - In the early 2000s the pre-Columbian, anthropologically produced black soil in the Amazon basin, „Terra Preta de Índio“, received greater scientific attention. Compared to the surrounding poor soils, this very fertile anthrosol contains significantly higher levels of microorganisms and nutrients. The reason for this was determined to be the likewise high levels of charred biomass. This stable carbon, now called biochar, has since been intensively examined as an option to improve soil and to store carbon. Although the creation of Terra Preta was most likely based on a purposeful utilization of organic residues from households and gardens, biochar plays no role in the current recycling of bio-waste. However, the implementation of biochar could lead to many improvements. Results from agricultural research suggest that not only the yield capacity of soils can be increased but also the process performance of composting and biogas plants. The latter is especially relevant since currently about 40% of all collected bio-waste in Germany is recycled in an energy-material cascade consisting of anaerobic digestion and composting. The use of biochar in this cascade could then sequentially increase biogas yields, reduce greenhouse gas emissions, and improve compost quality. To realize the aforementioned advantages, the concept of biochar has to be integrated into the existing bio-waste cascade as practically as possible. This was done by the development of a theoretical scenario that allowed the analysis of energy and material flows to evaluate biochar’s recycling performance. Furthermore, the legal and economic framework were examined to assess the feasibility of the extended cascade and to suggest possible adjustments to the frameworks. KW - Kompost KW - Biogas KW - Pflanzenkohle Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171108-36310 ER - TY - JOUR A1 - Assmann, Aleida T1 - Welche Zukünfte? N2 - Vortrag, gehalten am 20.04.2017 zur Einführung von Prof. Dr. Winfried Speitkamp in das Amt des Präsidenten der Bauhaus-Universität Weimar T3 - Neue Bauhausvorträge - 1 KW - Fortschritt KW - Ungewissheit KW - Nachhaltigkeit Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171130-36136 ER - TY - THES A1 - Heidenreich, Manuel T1 - Untersuchungen zur Sauerstoffbereitstellung mit Perowskit- Keramik-Schüttungen in einem Festbett-Reaktor N2 - Diese Arbeit belegt, dass die Belastungen auf reversibel arbeitende keramische Materialien sehr gering ausfallen. Die regenerative Sauerstoffbereitstellung stellt damit grundsätzlich niedrigere Anforderungen an die keramischen Perowskit-Materialien zur Sauerstofferzeugung als die Membrantechnologie. Das Absinken der Diffusionskoeffizienten bei niedrigen Temperaturen ist deutlich weniger nachteilig als bei den Membranen die vergleichbare Materialien nutzen. Dies konnte gezeigt werde, indem mit der die O 2 -Entladetechnik und -Beladetechnik im Vergleich zur O 2 -Abtrennung durch keramische Membranen bei vergleichsweise niedrigen Temperaturen bereits große O 2 -Mengen erzeugt werden können. Infolge der niedrigen Temperaturen bestehen keine Probleme mit Reaktionen zwischen dem sauerstoffbereitstellenden Material und den Reaktorwerkstoffen. Dadurch gestaltet sich die Einbindung und Nutzung von Festbett-Schüttungen denkbar einfach. Im Vergleich dazu sind die Anbindung und der Betrieb von dünnen keramischen Membranen in einem Reaktor deutlich aufwendiger. Es ist weniger Peripherie und verfahrenstechnischer Aufwand zur Sauerstoffabtrennung durch reversibel arbeitende Materialien nötig als bei der kryogenen Luftzerlegung, der Druckwechseladsorption oder den Membrantechnologien. Die regenerative Sauerstoffbereitstellung kann sowohl bei neuen als auch bestehenden Anlagen, die Sauerstoff benötigen implementiert werden. Damit ist es möglich den Transport des Sauerstoffs entfallen zu lassen. Eine partielle Phasenumwandlung des BSCF8020 bei erhöhter Temperatur und hohem Sauerstoffangebot spielt für die regenerative Sauerstoffbereitstellung eine untergeordnete Rolle, da die nötigen Zieltemperaturen (450 ggf. bis 650 °C) zur O 2 -Beladung und -Entladung niedriger sind, als der Temperaturbereich in dem die Zersetzung auftreten kann (750 bis 800 °C). Des Weiteren ist die Zeitspanne (O 2 -Beladungsteilzyklus) in der das BSCF8020 ausreichend hohen Sauerstoffgehalten (p O2 > 10 -3 bar) ausgesetzt ist, zu kurz um diese Umwandlungen zu vollziehen. Der O 2 -Entladungsteilzyklus sorgt zusätzlich immer dafür, dass sich u. U. beginnende Zersetzung zurückbildet, da die kubische Phase in Richtung niedrigerer p O2 stabilisiert wird. Es konnte belegt werden, dass die elektronische Steuerung des zyklischen Sauerstoffausbaus und -einbaus beherrschbar ist. Der hohe Abtrenngrad der keramischen Materialien führt dazu, dass der Sauerstoff elektrolytisch rein zu Verfügung gestellt wird. Grundsätzlich sind weitere Forschungen zur Steigerung der Sauerstoffmengen, die pro eingesetzter Masseeinheit an Keramik gewonnen werden können, immer anzustreben, da damit u. U. der Materialeinsatz weiter gesenkt oder auch die energetischen Aufwendungen weiter reduziert werden können. Bei dem, für die multizyklischen Untersuchungen dieser Arbeit ausgewählten BSCF8020(SVT) hat die Cobalt-Komponente mit ca. 80 % den überwiegenden Kostenanteil am Sauerstoff bereitstellenden Material. BSCF-Keramiken mit höherem Eisen-Anteil sollten für multizyklische Anwendungen in Festbett-Reaktoren einer vertiefenden Charakterisierung unterzogen werden, um weitere geeignete Perowskite mit niedrigen Materialkosten zu erschließen. KW - Perowskit KW - Sauerstoff KW - Keramik KW - Festbett KW - Schüttung KW - BSCF KW - LSCF KW - SrMnO3 KW - CSMF KW - Dynamische Messungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171027-36077 ER -