TY - THES A1 - Hatahet, Tareq T1 - On the Analysis of the Disproportionate Structural Collapse in RC Buildings N2 - Increasing structural robustness is the goal which is of interest for structural engineering community. The partial collapse of RC buildings is subject of this dissertation. Understanding the robustness of RC buildings will guide the development of safer structures against abnormal loading scenarios such as; explosions, earthquakes, fine, and/or long-term accumulation effects leading to deterioration or fatigue. Any of these may result in local immediate structural damage, that can propagate to the rest of the structure causing what is known by the disproportionate collapse. This work handels collapse propagation through various analytical approaches which simplifies the mechanical description of damaged reinfoced concrete structures due to extreme acidental event. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2018,2 KW - Beton KW - disproportionate collapse KW - buildings KW - reinforced concrete KW - catenary action KW - compressive arching KW - dynamic amplifification KW - structural robustness Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180329-37405 ER - TY - THES A1 - Most, Thomas T1 - Stochastic crack growth simulation in reinforced concrete structures by means of coupled finite element and meshless methods N2 - The complex failure process of concrete structures can not be described in detail by standard engineering design formulas. The numerical analysis of crack development in concrete is essential for several problems. In the last decades a large number of research groups have dealt with this topic and several models and algorithms were developed. However, most of these methods show some difficulties and are limited to special cases. The goal of this study was to develop an automatic algorithm for the efficient simulation of multiple cracking in plain and reinforced concrete structures of medium size. For this purpose meshless methods were used to describe the growth of crack surfaces. Two meshless interpolation schemes were improved for a simple application. The cracking process of concrete has been modeled using a stable criterion for crack growth in combination with an improved cohesive crack model which can represent the failure process under combined crack opening and crack sliding very well. This crack growth algorithm was extended in order to represent the fluctuations of the concrete properties by enlarging the single-parameter random field concept for multiple correlated material parameters. N2 - Das komplexe Versagensverhalten von Betonstrukturen kann in der Regel nicht mit Standardbemessungsformeln beschrieben werden. Eine detaillierte numerische Analyse der Rissentwicklung in Beton ist für einige Problemstellungen unverzichtbar. In den letzten Jahrzehnten haben sich eine Vielzahl von Forschergruppen mit dieser Thematik aus-einandergesetzt. Dabei wurden verschiedene Modelle und Algorithmen entwickelt. Die meisten dieser Verfahren weisen jedoch verschiedene Probleme auf oder sind nur für Spezialfälle anwendbar. Das Ziel dieser Arbeit war die Entwicklung eines automatischen Algorithmus zur effizienten Simulation von mehrfacher Rissentwicklung in Beton- und Stahlbetonstrukturen mittlerer Größe. Dabei wurden netzfreie Verfahren angewendet, um die Änderung der Rissoberflächen abzubilden. Zwei netzfreie Interpolationstypen wurden im Hinblick auf eine unkomplizierte Anwendung angepaßt. Der Versagensprozess des Betons wurde mit Hilfe eines stabilen Risskriteriums in Kombination mit einem erwei-terten kohäsiven Rissmodell abgebildet. Dieses erweiterte Modell kann die Zusammenhänge bei kombinierter Rissöffnung und -gleitung sehr gut wiedergeben. Der entwickelte Algorithmus zur Risssimulation wurde in Hinblick auf eine stochastische Modellierung erweitert. Zu diesem Zweck wurde das Zufallsfeldkonzept für die Abbildung mehrerer untereinander korrelierter Materialparameter ergänzt. T2 - Stochastische Rissfortschrittsberechnung in bewehrten Betonstrukturen unter Kopplung der Finiten Elemente Methode mit netzfreien Verfahren KW - Gitterfreie Methode KW - Stochastik KW - Risssimulation KW - Stahlbeton KW - Meshless method KW - stochastic KW - crack simulation KW - reinforced concrete Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20051219-7623 ER - TY - THES A1 - Ebert, Matthias T1 - Experimentelle und numerische Untersuchung des dynamischen Verhaltens von Stahlbetontragwerken unter Berücksichtigung stochastischer Eigenschaften N2 - Der Zusammenhang zwischen Schädigung und der Veränderung dynamischer und statischer Eigenschaften von Stahlbetonstrukturen wird untersucht. Auf der einen Seite stehen die statischen Lastversuche in Verbindung mit dynamischen Experimenten an Stahlbetonstrukturen (Platten und Balken). Auf der anderen Seite wird für die Balkenstrukturen ein nichtlineares Stochastisches Finite Elemente Modell entwickelt. Dies berücksichtigt zufällige Material- und Festigkeitseigenschaften durch räumlich korrelierte Zufallsfelder. So werden stochastische Rissentwicklungen für den Stahlbeton simuliert. Für die Berechnungen vieler Realisationen und damit verschiedenartige "Lebensgeschichten" einer Struktur wird als Monte Carlo Methode Latin Hypercube Sampling verwendet. Die Auswertung der Strukturantworten für die Lastgeschichte zeigt den Einfluss der zufälligen Eigenschaften auf die Schädigungsentwicklung. Die Arbeit leistet einen Beitrag zur Bewertung und zum zukünftigen Einsatz dynamischer Untersuchungsmethoden im Bauwesen. N2 - The relation between damage and the changing of dynamic and static properties of R/C structures is investigated. On the one side static experiments in relation with dynamic experiments of R/C structures (plates and beams) are performed. On the other side a nonlinear Stochastic Finite Element Model is developed. The model considers stochastic material and strength properties by spatial correlated random fields. So a random crack evolution for the R/C beams are simulated. As Monte Carlo Method Latin Hypercube Sampling is used to calculate a lot of samples and so various "live histories" of the structure. The evaluation of structure response for the load history indicates the influence of stochastic properties on the damage evolution. The work gives a contribution to the assessment and the use of dynamic investigation methods in the future in civil engineering. KW - Stahlbetonkonstruktion KW - Tragverhalten KW - Stochastische Analysis KW - Dynamische Belastung KW - Nichtlineare Finite-Elemente-Methode KW - Monte-Carlo-Methode KW - reinforced concrete KW - dynamic behavior KW - stochastics KW - nonlinear finite elements KW - Monte Carlo method Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040302-531 ER -