TY - JOUR A1 - Zhao, Jun-Hua A1 - Jia, Yue A1 - Wei, Ning A1 - Rabczuk, Timon T1 - Binding energy and mechanical stability of two parallel and crossing carbon nanotubes JF - Journal of Applied Mechanics N2 - Binding energy and mechanical stability of two parallel and crossing carbon nanotubes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - An analytical molecular mechanics model for the elastic properties of crystalline polyethylene JF - Journal of Applied Physics N2 - We present an analytical model to relate the elastic properties of crystalline polyethylene based on a molecular mechanics approach. Along the polymer chains direction, the united-atom (UA) CH2-CH2 bond stretching, angle bending potentials are replaced with equivalent Euler-Bernoulli beams. Between any two polymer chains, the explicit formulae are derived for the van der Waals interaction represented by the linear springs of different stiffness. Then, the nine independent elastic constants are evaluated systematically using the formulae. The analytical model is finally validated by present united-atom molecular dynamics (MD) simulations and against available all-atom molecular dynamics results in the literature. The established analytical model provides an efficient route for mechanical characterization of crystalline polymers and related materials. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2012 U6 - http://dx.doi.org/10.1063/1.4745035 ER - TY - JOUR A1 - Zhao, Jiyun A1 - Lu, Lixin A1 - Rabczuk, Timon T1 - The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers JF - Computational Materials Science N2 - The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 567 EP - 572 ER - TY - JOUR A1 - Zhao, Jiyun A1 - Jiang, Jin-Wu A1 - Wang, L. A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - Coarse-grained potentials of single-walled carbon nanotubes JF - Journal of the Mechanics and Physics of Solids N2 - Coarse-grained potentials of single-walled carbon nanotubes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhang, Yongzheng A1 - Ren, Huilong T1 - Implicit implementation of the nonlocal operator method: an open source code JF - Engineering with computers N2 - In this paper, we present an open-source code for the first-order and higher-order nonlocal operator method (NOM) including a detailed description of the implementation. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combined with the method of weighed residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. The implementation in this paper is focused on linear elastic solids for sake of conciseness through the NOM can handle more complex nonlinear problems. The NOM can be very flexible and efficient to solve partial differential equations (PDEs), it’s also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Finally, we present some classical benchmark problems including the classical cantilever beam and plate-with-a-hole problem, and we also make an extension of this method to solve complicated problems including phase-field fracture modeling and gradient elasticity material. KW - Strukturmechanik KW - Nonlocal operator method KW - Operator energy functional KW - Implicit KW - Dual-support KW - Variational principle KW - Taylor series expansion KW - Stiffness matrix Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220216-45930 UR - https://link.springer.com/article/10.1007/s00366-021-01537-x VL - 2022 SP - 1 EP - 35 PB - Springer CY - London ER - TY - JOUR A1 - Zhang, Yongzheng T1 - Nonlocal dynamic Kirchhoff plate formulation based on nonlocal operator method JF - Engineering with Computers N2 - In this study, we propose a nonlocal operator method (NOM) for the dynamic analysis of (thin) Kirchhoff plates. The nonlocal Hessian operator is derived based on a second-order Taylor series expansion. The NOM does not require any shape functions and associated derivatives as ’classical’ approaches such as FEM, drastically facilitating the implementation. Furthermore, NOM is higher order continuous, which is exploited for thin plate analysis that requires C1 continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for the time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation. KW - Angewandte Mathematik KW - nonlocal operator method KW - nonlocal Hessian operator KW - operator energy functional KW - dual-support KW - variational principle Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220209-45849 UR - https://link.springer.com/article/10.1007/s00366-021-01587-1 VL - 2022 SP - 1 EP - 35 PB - Springer CY - London ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Mabrouki, Tarek A1 - Fontaine, Michaël A1 - Gong, Yadong A1 - Rabczuk, Timon T1 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation JF - Composites Part B Engineering N2 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 27 EP - 33 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhao, Jun-Hua A1 - Jia, Yue A1 - Mabrouki, Tarek A1 - Gong, Yadong A1 - Wei, Ning A1 - Rabczuk, Timon T1 - An analytical solution on the interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase JF - Composite Structures N2 - An analytical solution on the interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 261 EP - 269 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhao, Jiyun A1 - Wei, Ning A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer JF - Composites Part B: Engineering N2 - Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 1714 EP - 1721 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Wei, Ning A1 - Zhao, Jun-Hua A1 - Gong, Yadong A1 - Rabczuk, Timon T1 - Quasi-analytical solution for the stable system of the multi-layer folded graphene wrinkles JF - Journal of Applied Physics N2 - Quasi-analytical solution for the stable system of the multi-layer folded graphene wrinkles KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Zhang, Chao A1 - Wang, Cuixia A1 - Lahmer, Tom A1 - He, Pengfei A1 - Rabczuk, Timon T1 - A dynamic XFEM formulation for crack identification JF - International Journal of Mechanics and Materials in Design N2 - A dynamic XFEM formulation for crack identification KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 427 EP - 448 ER - TY - JOUR A1 - Zhang, Chao A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Multiple cracks identification for piezoelectric structures JF - International Journal of Fracture N2 - Multiple cracks identification for piezoelectric structures KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2017 SP - 1 EP - 19 ER - TY - JOUR A1 - Zhang, Chao A1 - Hao, Xiao-Li A1 - Wang, Cuixia A1 - Wei, Ning A1 - Rabczuk, Timon T1 - Thermal conductivity of graphene nanoribbons under shear deformation: A molecular dynamics simulation JF - Scientific Reports N2 - Tensile strain and compress strain can greatly affect the thermal conductivity of graphene nanoribbons (GNRs). However, the effect of GNRs under shear strain, which is also one of the main strain effect, has not been studied systematically yet. In this work, we employ reverse nonequilibrium molecular dynamics (RNEMD) to the systematical study of the thermal conductivity of GNRs (with model size of 4 nm × 15 nm) under the shear strain. Our studies show that the thermal conductivity of GNRs is not sensitive to the shear strain, and the thermal conductivity decreases only 12–16% before the pristine structure is broken. Furthermore, the phonon frequency and the change of the micro-structure of GNRs, such as band angel and bond length, are analyzed to explore the tendency of thermal conductivity. The results show that the main influence of shear strain is on the in-plane phonon density of states (PDOS), whose G band (higher frequency peaks) moved to the low frequency, thus the thermal conductivity is decreased. The unique thermal properties of GNRs under shear strains suggest their great potentials for graphene nanodevices and great potentials in the thermal managements and thermoelectric applications. KW - Wärmeleitfähigkeit KW - Graphen KW - Schubspannung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31718 ER - TY - JOUR A1 - Zhak, S. V. A1 - Sidorenko, V. S. T1 - Optimized Models of Modes Choice for Displacement of technical Systems Objects N2 - The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated. KW - Modellierung KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5347 ER - TY - JOUR A1 - Zerbst, U. A1 - Vormwald, Michael A1 - Andersch, C. A1 - Mädler, K. A1 - Pfuff, M. T1 - The development of a damage tolerance concept for railway components and its demonstration for a railway axle JF - Engineering Fracture Mechanics N2 - The development of a damage tolerance concept for railway components and its demonstration for a railway axle KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2005 SP - 209 EP - 239 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas A1 - Viteikiene, Milda T1 - Database of Best Practices and Decision Support Web-based System for Construction Innovation N2 - Many construction and facilities management Web sites can be found on the Internet. The interested parties on construction and facilities management Web sites can find databases of best practices, calculators, analyzers, software, expert and decision support systems, neural networks, etc. Technological innovation mainly through changes in the availability of information and communication technology inclusive databases of best practices, calculators, analyzers, software, neural networks, decision support and expert systems that have been provided by a variety of new services developed by the construction and facilities management sectors. Most of all calculators, analyzers, software, decision support and expert systems, neural networks and on-line systems seek to find out how to make the most economic decisions and most of all these decisions are intended only for economic objectives. Alternatives under evaluation have to be evaluated not only from the economic position, but take into consideration qualitative, technical, technological and other characteristics as well. Based on the analysis of the existing calculators, analyzers, information, expert and decision support systems, neural networks and in order to determine most efficient versions of best practices a Decision Support Web-Based System for Construction Innovation (IDSS) was developed by Vilnius Gediminas Technical University. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2173 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas T1 - Civil Engineering Decision Support Systems in Lithuania N2 - Civil engineering decision support systems (construction, building life cycle, refurbishment, total quality management, innovation, etc.) created in Lithuania are described in this paper. The above decision support systems comprise of the following constituent parts: data (database and its management system), models (model base and its management system) and a user interface. Presentation of information in databases may be in conceptual (digital, textual, graphical, photographic, video) and quantitative forms. Quantitative information presented involves criteria systems and subsystems, units of measurement, values and initial weight fully defining the variants provided. The databases were developed providing a multiple criteria analysis of alternatives from economical, infrastructure, technical, technological, qualitative, legislative, social and other perspectives. This information is provided in a user-oriented way. Since the analysis of alternatives is usually performed by taking into account economical, infrastructure, technical, technological, qualitative and other factors, a model-base include models which enable a decision maker to carry out a comprehensive analysis of the variants available and make a proper choice. These systems, related questions and practical case study were analysed the paper. KW - Wissensmanagement KW - Bautechnik KW - Entscheidungsunterstützungssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2579 ER - TY - JOUR A1 - Zarzycki, Andrzej T1 - Formal Mutations N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/28 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-14016 ER - TY - JOUR A1 - Zander, Steffi A1 - Wetzel, Stefanie A1 - Kühl, Tim A1 - Bertel, Sven T1 - Underlying Processes of an Inverted Personalization Effect in Multimedia Learning – An Eye-Tracking Study JF - Frontiers in Psychology N2 - One of the frequently examined design principles recommendations in multimedia learning is the personalization principle. Based on empirical evidence this principle states that using personalised messages in multimedia learning is more beneficial than using formal language (e.g. using ‘you’ instead of ‘the’). Although there is evidence that these slight changes in regard to the language style affect learning, motivation and the perceived cognitive load, it remains unclear, (1) whether the positive effects of personalised language can be transferred to all kinds of content of learning materials (e.g. specific potentially aversive health issues) and (2) which are the underlying processes (e.g. attention allocation) of the personalization effect. German university students (N= 37) learned symptoms and causes of cerebral haemorrhages either with a formal or a personalised version of the learning material. Analysis revealed comparable results to the few existing previous studies, indicating an inverted personalization effect for potentially aversive learning material. This effect was specifically revealed in regard to decreased average fixation duration and the number of fixations exclusively on the images in the personalised compared to the formal version. This result can be seen as indicators for an inverted effect of personalization on the level of visual attention. KW - Lernen KW - multimedia learning KW - Computerunterstütztes Lernen KW - Multimedia KW - personalization effect KW - eye-tracking KW - cognitive load KW - multimedia design principles KW - OA-Publikationsfonds2017 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180312-37342 UR - https://www.frontiersin.org/articles/10.3389/fpsyg.2017.02202/full VL - 2017 IS - Volume 8, Article 2202 SP - 1 EP - 16 ER - TY - JOUR A1 - Zabel, Volkmar A1 - Brehm, Maik T1 - Das dynamische Verhalten von Eisenbahnbrücken mit kurzer Spannweite - numerische und experimentelle Untersuchungen JF - Bauingenieur, D-A-CH-Mitteilungsblatt N2 - Das dynamische Verhalten von Eisenbahnbrücken mit kurzer Spannweite - numerische und experimentelle Untersuchungen KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2008 ER -