TY - CHAP ED - Steiner, Maria ED - Theiler, Michael ED - Mirboland, Mahsa T1 - 30. Forum Bauinformatik N2 - Die Bauhaus-Universität Weimar ist seit langer Zeit mit dem Forum Bauinformatik eng verbunden. So wurde die Veranstaltung 1989 hier durch den Arbeitskreis Bauinformatik ins Leben gerufen und auch das 10. und 18. Forum Bauinformatik (1998 bzw. 2006) fand in Weimar statt. In diesem Jahr freuen wir uns daher besonders, das 30. Jubiläum an der Bauhaus-Universität Weimar ausrichten zu dürfen und viele interessierte Wissenschaftler und Wissenschaftlerinnen aus dem Bereich der Bauinformatik in Weimar willkommen zu heißen. Das Forum Bauinformatik hat sich längst zu einem festen Bestandteil der Bauinformatik im deutschsprachigen Raum entwickelt. Dabei steht es traditionsgemäß unter dem Motto „von jungen Forschenden für junge Forschende“, wodurch insbesondere Nachwuchswissenschaftlerinnen und ‑wissenschaftlern die Möglichkeit geboten wird, ihre Forschungsarbeiten zu präsentieren, Problemstellungen fachspezifisch zu diskutieren und sich über den neuesten Stand der Forschung zu informieren. Zudem wird eine ausgezeichnete Gelegenheit geboten, in die wissenschaftliche Gemeinschaft im Bereich der Bauinformatik einzusteigen und Kontakte mit anderen Forschenden zu knüpfen. In diesem Jahr erhielten wir 49 interessante und qualitativ hochwertige Beiträge vor allem in den Themenbereichen Simulation, Modellierung, Informationsverwaltung, Geoinformatik, Structural Health Monitoring, Visualisierung, Verkehrssimulation und Optimierung. Dafür möchten wir uns ganz besonders bei allen Autoren, Co-Autoren und Reviewern bedanken, die durch ihr Engagement das diesjährige Forum Bauinformatik erst möglich gemacht haben. Wir danken zudem Professor Große und Professor Díaz für die Unterstützung bei der Auswahl der Beiträge für die Best Paper Awards. Ein herzliches Dankeschön geht an die Kollegen an der Professur Informatik im Bauwesen der Bauhaus-Universität Weimar für die organisatorische, technische und beratende Unterstützung während der Planung der Veranstaltung. KW - Bauinformatik KW - BIM Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180917-37854 N1 - Printausgabe: ISBN 978-3-00-060726-4 ER - TY - CHAP ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar T1 - Internationales Kolloquium über Anwendungen der Informatik und Mathematik in Architektur und Bauwesen : 20. bis 22.7. 2015, Bauhaus-Universität Weimar T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - The 20th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering will be held at the Bauhaus University Weimar from 20th till 22nd July 2015. Architects, computer scientists, mathematicians, and engineers from all over the world will meet in Weimar for an interdisciplinary exchange of experiences, to report on their results in research, development and practice and to discuss. The conference covers a broad range of research areas: numerical analysis, function theoretic methods, partial differential equations, continuum mechanics, engineering applications, coupled problems, computer sciences, and related topics. Several plenary lectures in aforementioned areas will take place during the conference. We invite architects, engineers, designers, computer scientists, mathematicians, planners, project managers, and software developers from business, science and research to participate in the conference! KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren KW - Building Information Modeling KW - Optimization in engineering applications KW - Data, information and knowledge modeling in civil engineering KW - Function theoretic methods and PDE in engineering sciences KW - Mathematical methods for (robotics and) computer vision KW - Numerical modeling in engineering Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150828-24515 SN - 1611-4086 ER - TY - CHAP A1 - Abramian, A. K. T1 - Superelliptic Shells as new constructive Forms N2 - In the superelliptic shell joined to a circular cylinder bending stresses are absent when it is subjected to uniform pressure.Some geometrical characteristics have been found. Expressions for determining stresses in the shell crest(in the singular point of plane type) are suggested. The problem of a theoretical critical buckling load of an elongated shell supported by frames is studied. A critical buckling load for two shells with different specifications was found experimentally. KW - Schale KW - Ellipsoid KW - Beulung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4347 ER - TY - CHAP A1 - Abramian, A. K. A1 - Litvin, S.S. T1 - AUTOPARAMETRIC STABILIZER OF OSCILLATION AMPLITUDE N2 - A method of automatic maintenance of vibration amplitude of a number of mechanisms at given level, when exiting force amplitude is varied greatly is given. For this purpose a pendulum is attached to a mechanism through a viscoelastic hinge. Load of a pendulum can move along an arm and it is viscoelastic connected to it. KW - Schwingung KW - Amplitude KW - Stabilisierung KW - Automatisiertes System KW - Viskoelastisches Gelenk Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5674 ER - TY - CHAP A1 - Adamski, A. A1 - Bryniarska, Z. T1 - Schedule Synchronisation in public Transport by Tabu Search and Genetic Method N2 - This paper concerns schedule synchronization problems in public transit networks. In particular, it consists of three main parts. In the first the subject area is introduced, the terms are defined and framework for optimal synchronization in the form of problem representation and formulation is proposed. The second part is devoted to transfer synchronization problem when passengers changing transit lines at transfer points. The intergrated Tabu Search and Genetic solution method is developed with respect to this specific problem. The third part deals with headways harmonization problem i.e. synchronization of different transit lines schedules on a common segments of routes. For the solution of this problem a new bilevel optimization method is proposed with zones harmonization at the bottom level and co-ordination of zones, by time buffers assigned to timing points, at the upper level. Finally, the synchronization problems are numerically illustrated by real-life examples of the public transport lines in Cracow. KW - Öffentlicher Personennahverkehr KW - Verkehrsnetz KW - Synchronisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4146 ER - TY - CHAP A1 - Ahler, Marco T1 - Mobile Software-Agenten für neuartige Funktionen und Nutzeffekte in intelligenten Gebäudesystemen N2 - Anwendungsbezogene Software innerhalb vernetzter Gebäude nimmt immer mehr zu. Neue Standards erlauben den einfachen Fernzugriff, um neue Services zu installieren oder um Updates aufspielen zu können. Zu diesem Thema wird der OSGi-Standard vorgestellt, der ein Management von Software während des Betriebs vornehmen kann. Außerdem nimmt die Netzlast der heterogenen Netze innerhalb und zu den Häusern stetig zu. Hier können mobile Softwareagenten ihre Vorteile gegenüber herkömmlichen, statischen Kommunikationsmechanismen hervorheben. Im folgenden Text wird die Integration solcher mobilen Softwareagenten in bestehende Standards intelligenter Häuser beschrieben und anhand des Innovationszentrum Intelligentes Haus Duisburg (www.inhaus-duisburg.de) beispielhaft erläutert. Nach der Einleitung wird in Kapitel 2 der aktuelle Stand der Technik beschrieben. Dabei wird vor allem auf den OSGi-Standard und die Technik der mobilen Softwareagenten eingegangen. Im Kapitel 3 wird stehen vor allem Voranalysen zur Fernwartung, Optimierungen von Regelungen und die Integration dynamischer Netzteilnehmer im Vordergrund, die durch die beschriebenen Mechanismen erleichtert werden. Im Kapitel 4 werden die Ergebnisse kurz zusammengefaßt und einen Ausblick gegeben. KW - Leitsystem KW - Software KW - Transportables Gerät KW - Gebäudeleitsystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-834 ER - TY - CHAP A1 - Al Diab, Ali A1 - Henry, Eric A1 - Boulemia, Cherif T1 - A concerted and multi-criterion approach for helping to choose a Structure- Foundation system of building N2 - The research of the best building design requires a concerted design approach of both structure and foundation. Our work is an application of this approach. Our objective is also to create an interactive tool, which will be able to define, at the early design stages, the orientations of structure and foundation systems that satisfy as well as possible the client and the architect. If the concerns of these two actors are primarily technical and economical, they also wish to apprehend the environmental and social dimensions of their projects. Thus, this approach bases on alternative studies and on a multi-criterion analysis. In this paper, we present the context of our work, the problem formulation, which allows a concerted design of Structure and Foundation systems and the feasible solutions identifying process. KW - Bauwerk KW - Gründung KW - CAD KW - Entscheidung bei mehrfacher Zielsetzung KW - Early design stage KW - building KW - foundation KW - multi-criterion analysis KW - decision making Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2732 ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Bilek, Jochen T1 - Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures N2 - Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent–peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1481 ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Meißner, Udo F. T1 - Wahrnehmung und Verarbeitung von Ereignissen bei der verteilten Planung im baulichen Brandschutz T1 - Holistic Support for the Collaborative Planning of Fire Protection Concepts in Building Design N2 - Der Bauplanungsprozess ist durch ein hohes Maß an Kooperation zwischen Planungsbeteiligten verschiedener Fachrichtungen gekennzeichnet. Hierbei werden zum einen Planungen auf der Basis von Planungsinformationen anderer Planungsbeteiligter detailliert, zum anderen geben Planungen einzelner auch wichtige Rahmenbedingungen für die Gesamtplanung vor. Der vorliegende Beitrag beschreibt einen Ansatz zur ganzheitlichen Unterstützungen verteilter Planungen am Beispiel des baulichen Brandschutzes. Der Antrag trägt hierbei der verteilten und parallelen Planung Rechnung, wie sie heute bei der Planung großer und mittlerer Bauwerke angewendet wird. Die Verteiltheit wird nicht nur für die Planungsbeteiligten modelliert, sondern auch die einzelnen Planungsinformationen liegen im gemeinsamen Kooperationsverbund verteilt vor. Der Fokus dieses Beitrags liegt auf der Wahrnehmung von Planungsänderungen und Ereignissen während der Planung und die Verarbeitung dieser Informationen um eine durchgängige Planung zu gewährleisten. Dies wird zum einen durch das CoBE Awarenessmodell erreicht, mit dem Ereignisse erkannt und dem Informationsverbund zur Verfügung gestellt werden können. Zum anderen werden die Ereignisbehandlung und die darauf folgende fachgerechte Informationsverarbeitung mit Hilfe eines Multi-Agentensystems beschrieben. KW - Bauplanung KW - Softwaresystem KW - Netzwerk KW - Brandschutz KW - Verteiltes Softwaresystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-158 ER - TY - CHAP A1 - Althöfer, Ingo T1 - Multiple Choice Systems for Decision Support N2 - Humans are able to think, to feel, and to sense. We are also able to compute but not very well. In contrast, computers are giants in computing. Yet, they can not do anything else besides computing. Appropriate combinations of the different gifts and strengths of human and computer may result in impressive performances. In the 3-Hirn approach one human and two computers are involved. On the computers different programs are running. The human starts the machines and inspects the solutions they propose. He compares these candidate solutions and finally decides for one of the alternatives. So, the human makes the final choice from a small number of computer proposals. In performance-oriented chess, 3-Hirn combinations consisting of an amateur player and commer-cial software have reached world class level. 3-Hirn is a Decision Support System with Multiple Choice Structure. Such Multiple Choice Systems will be exhibited and discussed. KW - Entscheidung bei mehrfacher Zielsetzung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5685 ER - TY - CHAP A1 - Ameziane, Farid A1 - Lasserre, Stephane T1 - SYSBAT - An Application to the Building ProductionBased on Computer Supported Cooperative Work N2 - Our proposed solution is to enable partners of a construction project to share all the technical data produced and handled during the building production process by building a system through the use of internet technology. The system links distributed databases and allows building partners to access remotely and manipulate specific information. It provides an updated building representation that is being enriched and refined all along the building production process. A recent collaboration with Nemetschek France (subsidiary company of Nemetschek AG, AEC CAD software leader) focus on a building product repository available in a web context. The aim is to help building project actors to choose a technical solution that fits its professional needs, and maintain our information system with up to date information. It starts with the possibility to build on line building product catalogs, in order to link Allplan CAD entities with building technical features. This paper presents the conceptual approaches on which our information system is built. Starting from a general organization diagram organization, we focus on the product and the description branches of construction works (including last IFC model specifications). Our aim is to add decisional support to the construction works selection process. To do so, we consider the actor's role upon the system and the pieces of information each one needs to achieve a given task. KW - Bauplanung KW - Bauausführung KW - Computerunterstütztes Verfahren Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2748 ER - TY - CHAP A1 - Asayama, Shuichi A1 - Mae, Toshifumi T1 - Fractal Truss Structure and Automatic Form Generation Using Iterated Function System N2 - This paper describes a couple of new truss structures based on fractal geometry. One is the famous Sierpinski Gasket and another is a fractal triangle derived by means of applying a process forming leaves of a cedar tree using M. F. Barnsley’s contraction mapping theory. Therefore a pair of x-y coordinates of an arbitrary nodal point on the structures are generated easily if IFS(Iterated Function System) codes and a scale of them are specified. Structural members are defined similarly. Thus data for frame analysis can be generated automatically, which is significant if the objective structure has complex configuration. Next analytical results under vertical and wind loadings in Japanese Building Code are shown. Here members are assumed to be timber and to have cross section of 15cm×15cm. Finally authors conclude that geometrically new truss structures were developed and automatic data generation for frame analysis was attained using IFS. Analytical results show they contribute to saving material when compared it with King-post truss. KW - Konzipieren KW - Bauwerk KW - Fraktal Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1046 ER - TY - CHAP A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Object Oriented Finite Element Analysis for Structural Optimization using p-Elements N2 - The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed. KW - Konzipieren KW - Bauwerk KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1089 ER - TY - CHAP A1 - Bannwart, E. T1 - "CyberCity" - die Stadt im Kopf N2 - >CyberCity< ist ein Konzept, das durch ein virtuelles Abbild der räumlichen Realität einer Stadt (Berlin) eine uns bekannte Wahrnehmungsumgebung als Orientierungs- und Navigationserleichterung bereitstellt, um über diesen virtuellen Browser möglichst schnell und anschaulich an eine gewünschte Information zu kommen. Dieses Umgebungsmodell ist auch als Simulationsmodell für die Visualisierung stadträumlicher Beurteilungen neuer Projekte, verkehrstechnischer Massnahmen und ökologischer Belastungen geeignet. Insbesondere ist es als Orientierungsumgebung für die Telepräsenz über die Kommunikationsnetze gedacht, die über die virtuellen Repräsentanten (Avatare) eine besondere gesellschaftliche Brisanz erhält. KW - Stadtplanung KW - Virtuelle Realität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4247 ER - TY - CHAP A1 - Baranski, Jacek A1 - Boron, Jacek T1 - Computer Modeling of the Joints for WGP Construction Systems N2 - Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used. KW - Gebäude KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2935 ER - TY - CHAP A1 - Becker, Rainer T1 - Vernetzte Embedded Systems und Visualisierung mit Java N2 - In modernen Gebäuden nimmt die Komplexität der Heizungstechnik ständig zu. Damit wird es auch immer schwieriger, ein ökologisch und ökonomisch vernünftiges Zusammenspiel der Komponenten zu gewährleisten. Die Vernetzung der verschiedenen Komponenten eines Heizsystems mittels Netzwerktechnik aus der EDV soll helfen, die Energieeffizienz zu erhöhen. Embedded Systems und Mikrocontroller fungieren als Regler für die Teilsysteme. Durch Kommunikation untereinander sollen sie ihr Regelverhalten aneinander anpassen. Eine Internetanbindung ermöglicht die Nutzung weiterer Informationen für die Betriebsführung. Außerdem kann der Internetanschluss für die Fernwartung der Anlage genutzt werden. Mit kleinen, im Webbrowser eines Rechners ausgeführten Java-Programmen, sogenannten Applets, können die Betriebszustände von Heizsystemen in Echtzeit visualisiert werden. Durch das Aufzeichnen von Betriebsdaten wird deren Analyse ermöglicht. KW - Heizung KW - Regelungstechnik KW - Netzwerktheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2755 ER - TY - CHAP A1 - Beer, Daniel G. A1 - Firmenich, Berthold T1 - Freigabebestände von strukturierten Objektversionsmengen in Bauprojekten N2 - Die verteilte Bearbeitung gemeinsamer Produktmodelle ist im Bauwesen Gegenstand der aktuellen Forschung. Der vorgestellte Lösungsansatz bewegt sich in einem Spannungsfeld: Zum einen sollen die zu bearbeitenden Teilmengen des Produktmodells sehr flexibel durch die Planer zu bilden sein, zum anderen müssen Revisions- und Freigabestände dauerhaft und unveränderlich definiert werden. In einer versionierten Umgebung mit vielen Abhängigkeiten sind diese Anforderungen schwierig zu erfüllen. Der vorgestellte Lösungsansatz zeigt die Bildung von Revisions- und Freigabeständen, ohne die flexible verteilte Bearbeitung einzuschränken. Die Freigabestände müssen bestimmte Eigenschaften erfüllen: Es darf beispielsweise nur eine Version eines Objekts enthalten sein und es müssen die Bindungen zu anderen Objektversionen in einer konsistenten Weise berücksichtigt werden. Es wird eine mathematische Beschreibung gewählt, die auf der Mengenlehre und der Graphentheorie basiert. KW - Bauvorhaben KW - Projektplanung KW - CAD Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-80 ER - TY - CHAP A1 - Berbig, Torsten A1 - Menzel, Karsten A1 - Eisenblätter, Karin T1 - "Mobile Computing" - Anforderungen & Einführungsstratgie aus Sicht der Baupraxis N2 - Die Sicherung der Wettbewerbsfähigkeit im Bereich des Bauwesens, insbesondere kleinerer und mittelständischer Betriebe erfordert ein aktives Handeln als Antwort auf die sich ändernde Wettbewerbssituation. Einen wesentlichen Wettbewerbsvorteil können kleine unternehmerische Einheiten durch höhere Flexibilität, schnelle Reaktion auf Kundenwünsche oder aktuelle Situationen auf der Baustelle und Marktnähe erreichen. Dazu ist es nötig, die Informations- und Kommunikationsströme durch Einsatz standardisierter und kostengünstiger Hard- und Software wie z.B. Handhelds zu unterstützen und insbesondere die existierenden Hindernisse im Informationsfluss zwischen Baustelle und Büro zu beseitigen. Am Beispiel der Projekte >IuK - SystemBau< und >eSharing< wird eine Einführungsstrategie für >Mobile Computing< in kleinen unternehmerischen Einheiten des Bauwesens (KMU) basierend auf einer umfangreichen Anforderungsanalyse vorgestellt. Folgende Aspekte sollen beschrieben werden: durchgängiger Einsatz der Technik unter Beachtung der verschiedenen Qualifikationsniveaus, Einführungsunterstützung durch Schulungen, Prozessanalyse und mögliche Integration in bestehende Software-Umgebungen sowie Feldtests. KW - Bauablauf / Ablaufplanung KW - Computerunterstütztes Verfahren KW - Transportables Gerät Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2948 ER - TY - CHAP A1 - Berger, Hans A1 - Graeff-Weinberg, K. T1 - FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-Übergangselementen N2 - Detailuntersuchungen an Tragwerken führen bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. Während in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gewählt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des Übergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-Übergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits über nur eine Stufe erzielen läßt. Diese neu entwickelten sogenannten pNh-Elemente ermöglichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten für h-Verfeinerung). Das wird durch N stückweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht äquidistant sein braucht. Darüber hinaus ist es möglich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der Übergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung läßt sich dies besonders günstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit Übergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten Übergangselementkonzeptes umfassend demonstriert. KW - Tragwerk KW - Modellierung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4267 ER - TY - CHAP A1 - Berkhahn, Volker A1 - Kinkeldey, Christoph A1 - Schleinkofer, Matthias T1 - Re-Engineering Based on Construction Drawings - From Ground Floor Plan to Product Model N2 - For the management or reorganisation of existing buildings, data concerning dimensions and construction are necessary. Often these data are given exclusively by paper-based drawings and no digital data such as a computer based product model or even a CAD-model are available. In order to perform mass calculation, damage mapping or a recalculation of the structure these drawings of the building under consideration have to be analysed manually by the engineer. This is a very time-consuming job. In order to close this gap between drawings of an existing building and a digital product model an approach is presented in this paper to digitise a drawing, to build up geometric and topologic models and to recognise construction parts of the building. Finally all recognised parts are transformed into a three-dimensional geometric model which provides all necessary geometric information for the product model. During this import process the semantics of a ground floor plan has to be converted into a 3D-model. KW - Architektur KW - Verteiltes System KW - Dreidimensionales CAD KW - Produktmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1832 ER - TY - CHAP A1 - Bernstein, Swanhild T1 - Lippmann-Schwinger’s integral equation for quaternionic Dirac operators : Integral Representations for Solutions of Quaternionic Dirac-type equations N2 - Maxwell's equations can be rewritten in terms of a Dirac operator D+a. The advantage is that in this setting Maxwell's equations are treated as a system of first order differential equations. To ensure the uniqueness of a non-homogeneous differential equation in the whole space additional conditions are needed. KW - Quaternion KW - Anwendung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2772 ER - TY - CHAP A1 - Bernstein, Swanhild A1 - Richter, Matthias T1 - The Use of Genetic Algorithms in Finite Element Model Identification N2 - A realistic and reliable model is an important precondition for the simulation of revitalization tasks and the estimation of system properties of existing buildings. Thereby, the main focus lies on the parameter identification, the optimization strategies and the preparation of experiments. As usual structures are modeled by the finite element method. This as well as other techniques are based on idealizations and empiric material properties. Within one theory the parameters of the model should be approximated by gradually performed experiments and their analysis. This approximation method is performed by solving an optimization problem, which is usually non-convex, of high dimension and possesses a non-differentiable objective function. Therefore we use an optimization procedure based on genetic algorithms which was implemented by using the program package SLang... KW - Finite-Elemente-Methode KW - Genetischer Algorithmus Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2769 ER - TY - CHAP A1 - Beucke, Karl T1 - Entwicklung der Bauinformatik in Deutschland N2 - Die Informatik im Bauwesen oder kurz Bauinformatik hat sich in den vergangenen Jahren in Deutschland kontinuierlich entwickelt und sie hat einen festen Platz in den Fakultäten im Bauingenieurwesen an den deutschen Universitäten erhalten. Diese Entwicklung war anfänglich sehr stark fixiert auf die Berechnungen des physikalischen Verhaltens von Bauwerken. In den letzten Jahren kamen weitere Gebiete hinzu. Hier ist vor allem die Zeichnungserstellung (CAD) hervorzuheben. Diese Entwicklungen haben einen großen Reifegrad erlangt und sie haben einen festen Platz in Lehre und Forschung in der Bauinformatik. Die Rolle der Bauinformatik allgemein hat in den letzten Jahren eine stürmische Entwicklung genommen. Die Breite der Anwendungen hat ständig zugenommen und die Forderung nach einer durchgängigen Nutzbarkeit aller Informationen, die in diesem Zusammenhang bearbeitet werden, wird immer stärker gestellt. Besonders zwei Problemstellungen stehen im Mittelpunkt vieler Entwicklungen in der Bauindustrie und in den entsprechenden Softwarehäusern. Dies sind die Entwicklung und Nutzung technischer Modelle zur Unterstützung des Bauprozesses und die Unterstützung betriebswirtschaftlicher Anforderungen in der Bauindustrie. Vor allem die zweite Anforderung war bisher kaum Gegenstand der Bauinformatik. Aktuelle Bestrebungen vor allem aus der Praxis wirken darauf hin, diesen Zustand zu ändern. Die Fakultät Bauingenieurwesen an der Bauhaus-Universität beginnt diesen Anforderungen dadurch Rechnung zu tragen, daß kontinuierlich die notwendigen Voraussetzungen geschaffen werden, um diese Thematik in Lehre und Forschung kompetent aufnehmen zu können. Externe Referenten, die an der Spitze entsprechender Entwicklungen sind, werden in die Lehre mit eingebunden. Dies soll eine kontinuierliche Weiterentwicklung einleiten, die helfen soll, eine zeitgemäße Ausbildung der zukünftigen Bauingenieure sicherzustellen. KW - Bauwesen KW - Informatik KW - Betriebswirtschaft Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4233 ER - TY - CHAP A1 - Biehounek, Josef A1 - Grolik, Helmut T1 - Zur voll-probabilistischen Verallgemeinerung des Kraftgrößenverfahrens N2 - Die Versagenswahrscheinlichkeit nach einem Grenzzustand wird gewöhnlich mit dem Integral I der Basisvariablen-Verteilungsdichte über den Versagensbereich bestimmt. Dabei ist eine geschlossene Lösung nur im Spezialfall normalverteilter Basisvariablen bei Linearität der Grenzzustandsgleichung möglich. In anderen Fällen sind verschiedene Näherungsverfahren gebräuchlich, die auf den Momenten der Basisvariablen und geeignet gewählten Indizes als Sicherheitskenngrößen beruhen. Eine größere Genauigkeit bieten die Zuverlässigkeitstheorien erster bzw. zweiter Ordnung, die ebenfalls von I ausgehen. Im Beitrag wird ein neuartiges Verfahren vorgestellt, dessen Ausgangspunkt nicht I, sondern das Kraftgrößenverfahren als einem Standardalgorithmus des konstruktiven Ingenieurbaus ist. Die Einbeziehung der maßgebenden Zufallsgrößen in die Matrix der Vorzahlen und die Belastungszahlen führt zur Verallgemeinerung des Systems der Elastizitätsgleichungen zum zufälligen System der Elastizitätsgleichungen. Dessen Lösung, die durch den Übergang zu einem deterministischen Ersatzsystem gewonnen wird, liefert die statisch Unbestimmten als Funktionen der im System wirkenden Zufallsgrößen (z.B. E-Modul der Stäbe und Belastung). Da dieser Zusammenhang analytisch vorliegt, kann die Wirkung einzelner Zufallseinflüsse auf die statisch Unbestimmten und die daraus folgenden sicherheitsrelevanten Zustandsgrößen beurteilt werden. Die Dichtefunktion der Grenzzustandsgleichung kann berechnet oder durch Simulation ermittelt werden. Daraus folgt . Nicht normalverteilte Zufallsgrößen werden durch Entwicklung in orthogonale Polynome Gaußscher Zufallsgrößen berücksichtigt. KW - Kraftmethode KW - Versagen KW - Wahrscheinlichkeitsrechnung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5728 ER - TY - CHAP A1 - Biehounek, Josef A1 - Grolik, Helmut A1 - Herz, Susanne T1 - Zur Anwendung von Chaos-Entwicklungen in der Tragwerksstatik N2 - Seit mehr als fünfzig Jahren werden zur Untersuchung der Tragwerkssicherheit auch Methoden der Wahrscheinlichkeitsrechnung herangezogen. Ungeachtet der inzwischen erreichten Fortschritte und der offensichtlichen Vorzüge, konnte dieses Vorgehen in der Praxis bis jetzt noch nicht ausreichend Fuß fassen. Im Beitrag wird das Problem der Tragwerkssicherheit mit einem neuartigen Verfahren behandelt. Im Unterschied zu den üblichen probabilistischen Methoden geht es nicht von Verteilungsfunktionen aus. Vielmehr werden die maßgebenden Zufallsgrößen in den Mittelpunkt gestellt und direkt in die Rechenvorschrift eingeführt. Als mathematisches Hilfsmittel dienen die WIENERschen Chaos-Polynome. Sie stellen im Raum der Zufallsgrößen mit beschränkter Varianz eine Basis dar, mit der sich eine beliebige Zufallsgröße nach orthogonalen Polynomen GAUSSscher Zufallsgrößen entwickeln läßt. So entsteht ein effektiver Formalismus, der sich eng an die herkömmliche Deformationsmethode anlehnt und als deren probabilistische Verallgemeinerung angesprochen werden darf. Die Methode liefert die Grenzzustandsbedingung als Funktion der auf das Tragwerk wirkenden Zufallsgrößen. Die Versagenswahrscheinlichkeit kann daher durch Monte-Carlo-Simulation bestimmt werden. Die mit der Auswertung des Wahrscheinlichkeitsintegrals der First Order Reliability Method (FORM) verbundenen Schwierigkeiten werden vermieden. An einem Beispieltragwerk wird dargestellt, wie sich Veränderungen gewisser Konstruktionsparameter auf die Versagenswahrscheinlichkeit auswirken. KW - Baustatik KW - Sicherheit KW - Zufallsvariable KW - Chaostheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2784 ER - TY - CHAP A1 - Bilek, Jochen A1 - Hartmann, Dietrich T1 - Agentenbasiertes Kooperationsmodell zur Unterstützung vernetzter Planungsprozesse in der Tragwerksplanung N2 - Die heutige Situation in der Tragwerksplanung ist durch das kooperative Zusammenwirken einer größeren Anzahl von Fachleuten verschiedener Disziplinen (Architektur, Tragwerksplanung, etc.) in zeitlich befristeten Projektgemeinschaften gekennzeichnet. Bei der Abstimmung der hierdurch bedingten komplexen, dynamischen und vernetzten Planungsprozesse kommt es dabei häufig zu Planungsmängeln und Qualitätseinbußen. Dieser Artikel zeigt auf, wie mit Hilfe der Agententechnologie Lösungsansätze zur Verbesserung der Planungssituation erreicht werden können. Hierzu wird ein Agentenmodell für die vernetzt-kooperative Tragwerksplanung vorgestellt und anhand der Planung einer Fußgängerbogenbrücke anschaulich demonstriert. Das Agentenmodell erfasst (1) die beteiligten Fachplaner und Organisationen, (2) die tragwerksspezifischen Planungsprozesse, (3) die zugehörigen (Teil-)Produktmodelle und (4) die genutzte (Ingenieur-)Software. Hieraus leiten sich die drei Teilmodelle (1) agentenbasiertes Kooperationsmodell, (2) agentenbasierte Produktmodellintegration und (3) Modell zur agentenbasierten Software-Integration ab. Der Fokus des Artikels liegt auf der Darstellung des agentenbasierten Kooperationsmodells. KW - Tragwerk KW - Planung KW - Computerunterstütztes Verfahren Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2791 ER - TY - CHAP A1 - Biltchouk, Irina T1 - Entwicklung einer Datenbasis für Anwendungen im Bauwesen N2 - Die Aufgaben des Bauwesens erfordern den direkten Zugriff auf Objekte einer Datenbasis, die in dem Arbeitsspeicher einer Sitzung und in mehreren Binärdateien verteilt sind. In den Methoden einer Anwendung soll jedes Objekt unabhängig vom Ort seiner Speicherung mit seinem Namen als persistentem Identifikator direkt ansprechbar sein. Bei Bedarf sollen Objekte automatisch aus Dateien nachgeladen werden. Der Anwender soll bestimmen können, in welcher Datei ein bestimmtes Objekt gespeichert wird. Die Zugriffszeit auf ein Objekt soll im Mittel mit der Zugriffszeit auf ein Objekt in einer Java-Methode vergleichbar sein. Ein Konzept einer generalisierten Datenbasis wird vorgestellt. Seine Leistungsfähigkeit wird mit der vorhandenen Software für die Aufbewahrung und Verwaltung von Daten im Bauwesen verglichen. Es erweist sich als zweckmäßig, bereits im Entwurf einer Anwendung streng zwischen persistenten und transienten Objekten zu unterscheiden. Alle persistenten Objekte der Anwendung werden benannt. Unbenannte persistente Objekte der Java Plattform, beispielsweise Kollektionen und graphische Objekte, sind ebenfalls mit einem Griff (einem von der Datenbasis zugeteilten Namen) speicherbar. Der Zugriff auf ein Objekt ist schnell, da nur primitive Datentypen und Strings in binärer Form ohne Rückgriff auf Datenbanken gespeichert werden. KW - Bauplanung KW - Datenbank Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3123 ER - TY - CHAP A1 - Biltchouk, Irina A1 - Pahl, Peter Jan T1 - Interaction of Data Bases and Graphical Interfaces in Civil Engineering N2 - Applications for civil engineering tasks usually contain graphical user interfaces for the engineering processes. Persistent objects of the applications are stored to data bases. The influence of the interaction between a graphical user interface and a data base for the development of an civil engineering application is investigated in this paper. A graphic application for the linear elastic analysis of plane frames, which was previously developed with standard tools of the Java platform, is compared to a redesigned implementation using a generalized data base for persistent objects. The investigation leads to the following results : - A strict distinction between persistent and transient objects influences the class structure of an application, in particular the class structure of a graphical user interface. - The structure of an application depends on the logic for updating of references to persistent and transient graphical objects after an application is read from a file. - The complexity of the reference management can usually be handled better by just in time referencing associated with String - identifiers rather than by automated referencing associated with Name - identifiers. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Graphische Benutzeroberfläche KW - Datenbank Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1636 ER - TY - CHAP A1 - Bittrich, Daniel T1 - Verbunddokumente als Nutzeroberfläche von Software für die Tragwerksplanung N2 - Der Schwerpunkt von Forschung und Entwicklung auf dem Gebiet der Tragwerksplanungs-Software lag in den letzten Jahren auf der Erweiterung des funktionalen Umfangs. In der Folge ist es notwendig, den gestiegenen Funktionsumfang einem möglichst breiten Anwenderkreis durch ingenieurgemäß gestaltete Arbeitsumgebungen zugänglich zu machen, so dass ein möglichst effizientes und fehlerarmes Arbeiten ermöglicht wird. Aus der Sicht der Tragwerksplaner muss eine ingenieurgemäß gestaltete Software eine dem spezifischen Arbeitsablauf angepasste Nutzer-Software-Interaktion aufweisen. Dabei sind die benötigten Funktionalitäten in ein einheitliches System zu integrieren und eine Anpassbarkeit durch den Anwender sicherzustellen. Die Berücksichtigung dieser Anforderungen mit herkömmlichen Mitteln würde einen unverhältnismäßig hohen Entwicklungsaufwand erfordern. Infolgedessen muss aus der Sicht der Software-Entwickler eine moderne Software-Architektur für die Tragwerksplanung eine Erhöhung des Wiederverwendungsgrades und eine unabhängige Erweiterbarkeit als zusätzliche Anforderungen erfüllen. In diesem Beitrag wird ein auf Verbunddokumenten basierendes Konzept vorgestellt, mit dem eine Zusammenführung von Standard-Software und fachspezifischen Software-Komponenten zu einer ingenieurgemäßen Arbeitsumgebung ermöglicht wird. Damit kann die Analyse und die Dokumentation eines Tragelementes einschließlich der zugehörigen Datenhaltung innerhalb eines Verbunddokumentes erfolgen. Gleichzeitig kann der software-technische Wiederverwendungsgrad durch die Definition eines Component Frameworks als unabhängig erweiterbare Software-Architektur und durch den Einsatz von Software-Komponenten mit eigener Nutzeroberfläche über das bisher erreichte Niveau hinaus gesteigert werden. Die Umsetzbarkeit des Konzeptes wird durch eine Pilotimplementierung demonstriert. KW - Tragwerk KW - Baustatik KW - CAE KW - Softwareengineering Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5739 ER - TY - CHAP A1 - Bonev, Z. A1 - Hristov, H. T1 - BEHAVIOR FACTOR EVALUATION BASED ON SDOF SYSTEM PRESENTATION AND ENERGY APPROACH N2 - Rectangular steel frames are considered and subjected to strong ground motion. Their behavior factor is numerically evaluated using nonlinear time history analysis and different ground acceleration records. The behavior factor is determined assuming severe collapse mechanism occurs throughout the time history. The system of equations is transformed into single equation end then the energy balance concept is applied. The expression for the behavior factor is derived and its application to four story two bays steel frame is illustrated and the corresponding results are discussed. KW - Rahmentragwerk KW - Stahlkonstruktion KW - Erdbebenbelastung KW - Bewertung KW - SDOF Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5702 ER - TY - CHAP A1 - Both, Petra von A1 - Kohler, Niklaus A1 - Gessmann, Robin T1 - A virtual life cycle structured platform for building applications N2 - The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data. KW - Bauwerk KW - Datenmanagement KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1219 ER - TY - CHAP A1 - Boukamp, Frank A1 - Akinci, Burcu T1 - Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications N2 - This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system. KW - Bauwerk KW - Datenmanagement KW - Modellierung KW - Norm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1315 ER - TY - CHAP A1 - Boyko, Igor P. A1 - Köppler, H. A1 - Kirichuk, A. T1 - INTERACTION OF SPATIAL THIN-WALLED STRUCTURES WITH FLUID-SATURATED SOIL N2 - Thin-walled spatial structures are broadly used in the modern technician and building. In fuel industry for long-term keeping of oil and gas are used reservoirs of various capacity, which on technological reasons can be shipped under the soil. Shells of reservoirs combine in itself high toughness and low specific consumption of materials. At the same time, being under the soil, they feel steady-state and dynamic loads from ambiance, which particularly in the event, when reservoir is empty, can bring about the loss of stability of its form. On the other hand contact interactions of shell and soil greatly depend on features of ambiance and its saturating of liquid. For building generalized porous springy ambiance models, saturated by the liquid, it is possible to use Bio equations of motion for displacement of hard and fluid phases. Elaboration of mathematical specified interaction models and theirs realization by means of modern computing software allows to study behaviour of spatial thin-walled designs on base of geometric nonlinear theory of shells KW - Raumtragwerk KW - Dünnwandiges Bauelement KW - Boden-Bauwerk-Wechselwirkung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5748 ER - TY - CHAP A1 - Brackx, Fred A1 - De Schepper, Hennie A1 - Lagae, Johan T1 - Mathematical model of the laminated frame for a dome N2 - On the basis of the little material available (an architecture plan and some photographs) a computer model is developed for a bullet shaped dome, part of the Belgian Congo pavilion, created by the architect Henry Lacoste for the International Colonial Exhibition of 1931 in Paris. The ingenious and elegant wooden skeleton of the dome is approximated in two stages. The first approximation focusses on the curves traced on the dome by the wooden laminae, which appear to be loxodromes, cutting the meridians by a constant angle. In a second approximation the very specific joints of the laminae are taken into consideration. The resulting computer image shows an astonishing resemblance with the photographs. Finally, the shapes and dimensions of all laminae are calculated, enabling a possible reconstruction of the dome. KW - Kuppel KW - Sandwichbauweise KW - Mathematisches Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2803 ER - TY - CHAP A1 - Brackx, Fred A1 - De Schepper, Nele A1 - Sommen, Frank T1 - The Hermite Transformation in Quaternionic Analysis N2 - The conventional way of describing an image is in terms of its canonical pixel-based representation. Other image description techniques are based on image transformations. Such an image transformation converts a canonical image representation into a representation in which specific properties of an image are described more explicitly. In most transformations, images are locally approximated within a window by a linear combination of a number of a priori selected patterns. The coefficients of such a decomposition then provide the desired image representation. The Hermite transform is an image transformation technique introduced by Martens. It uses overlapping Gaussian windows and projects images locally onto a basis of orthogonal polynomials. As the analysis filters needed for the Hermite transform are derivatives of Gaussians, Hermite analysis is in close agreement with the information analysis carried out by the human visual system. In this paper we construct a new higher dimensional Hermite transform within the framework of Quaternionic Analysis. The building blocks for this construction are the Clifford-Hermite polynomials rewritten in terms of Quaternionic analysis. Furthermore, we compare this newly introduced Hermite transform with the Quaternionic-Hermite Continuous Wavelet transform. The Continuous Wavelet transform is a signal analysis technique suitable for non-stationary, inhomogeneous signals for which Fourier analysis is inadequate. Finally the developed three dimensional filter functions of the Quaternionic-Hermite transform are tested with traditional scalar benchmark signals upon their selectivity at detecting pointwise singularities. KW - Quaternion KW - Hermitesche Entwicklung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2817 ER - TY - CHAP A1 - Brehm, Maik A1 - Most, Thomas T1 - A Four-Node Plane EAS-Element for Stochastic Nonlinear Materials N2 - Iso-parametric finite elements with linear shape functions show in general a too stiff element behavior, called locking. By the investigation of structural parts under bending loading the so-called shear locking appears, because these elements can not reproduce pure bending modes. Many studies dealt with the locking problem and a number of methods to avoid the undesirable effects have been developed. Two well known methods are the >Assumed Natural Strain< (ANS) method and the >Enhanced Assumed Strain< (EAS) method. In this study the EAS method is applied to a four-node plane element with four EAS-parameters. The paper will describe the well-known linear formulation, its extension to nonlinear materials and the modeling of material uncertainties with random fields. For nonlinear material behavior the EAS parameters can not be determined directly. Here the problem is solved by using an internal iteration at the element level, which is much more efficient and stable than the determination via a global iteration. To verify the deterministic element behavior the results of common test examples are presented for linear and nonlinear materials. The modeling of material uncertainties is done by point-discretized random fields. To show the applicability of the element for stochastic finite element calculations Latin Hypercube Sampling was applied to investigate the stochastic hardening behavior of a cantilever beam with nonlinear material. The enhanced linear element can be applied as an alternative to higher-order finite elements where more nodes are necessary. The presented element formulation can be used in a similar manner to improve stochastic linear solid elements. KW - Nichtlineare Mechanik KW - Finite-Elemente-Methode KW - Zufallsvariable Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2825 ER - TY - CHAP A1 - Breit, Manfred A1 - Kündig, Daniel A1 - Häubi, Fritz T1 - Project oriented learning environment (POLE-Europe) N2 - The presented work focuses on collaboration- experiences gathered with complex design and engineering projects, using the learning platform POLE- Europe. Within the POLE environment student-teams from different universities, disciplines and cultural backgrounds are assigned to real-world projects with clearly defined design - tasks, usually to be accomplished within one semester while working in a virtual environment for most of the time. The concept of POLE and the information and collaboration technology is described. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-935 ER - TY - CHAP A1 - Brennig, Thomas A1 - Sanio, Hans-Peter T1 - New Methods of Computer Aided Optimization of Investment and Operating Costs for Buildings During Their Useful Life N2 - Current software solutions for real estate planning, construction and use, do not model the complete life cycle of a building. Well-integrated software tools exist for the planning and construction phases. Data integrity exists throughout the planning and construction phases, but problems occur at the transition to the use-phase. At this interface, the complete data set of planning and execution gets lost. Another software deficiency is that current software solutions don’t handle construction work and maintenance work equally. This is why a new software generation is demanded, which continuously covers the entire workflow process from the planning phase to the demolition of a building. New data concepts have to be developed, which allow bringing work items for construction together with work items for real estate use. KW - Optimierung KW - Baukosten KW - Betriebskosten Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-965 ER - TY - CHAP A1 - Bubner, Andre A1 - Friedrich, Torsten T1 - Klassifikation und Definition baufachlicher Verknüpfungstypen als Basis zur Modellüberführung im konstruktiven Ingenieurbau N2 - Die Bearbeitung von Bauprojekten erfordert ein hohes Maß an Fachwissen verschiedener Disziplinen. Dabei kommt eine Vielzahl spezialisierter Fachmodelle zum Einsatz. Zur Übernahme der Daten von anderen Planern in das eigene, neu zu erstellende Fachmodell sind die verfügbaren Inhalte aus verschiedenen Modellen vom Fachplaner entsprechend seiner Anforderungen anzupassen und um spezifische Inhalte zu ergänzen. Dabei ergeben sich Beziehungen, welche die Zusammenhänge und Abhängigkeiten der Fachmodelle untereinander aufzeigen. Eine zugleich allgemeingültige sowie vollständige Vordefinition des durch die Beziehungen beschriebenen Modellverbundes ist kaum möglich. Zur rechnerinternen Abbildung erfolgt aus diesem Grund eine Zerlegung des Modellverbundes in Partialmodelle und entsprechende Verknüpfungen. Die Beschaffenheit des Beziehungsgeflechtes hängt sowohl von der Qualität der Datenmodelle als auch von der Beschreibungsgüte der Verknüpfungstypen, deren Definition ein hohes Maß an Fachwissen erfordern, ab. Mit einem Konzept zur Strukturierung und Zerlegung der Verbindungen in Basiselemente sowie der Integrationsmöglichkeit zu komplexeren Elementen wird eine einfachere Erstellung, Wartung und Anpassung von umfassenden baufachlichen Inhalten ermöglicht. Zur Sicherung einer hochwertigen Beschreibung des Modellverbundes ist ein an die Fähigkeiten des Ingenieurs ausgerichteter Zugang zur Spezifikation und Anpassung der Beziehungsdefinitionen unverzichtbar. KW - Ingenieurbau KW - Verteiltes Datenbanksystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2834 ER - TY - CHAP A1 - Bubner, Andre A1 - Thierfelder, Jan T1 - Austausch von planungsrelevanten Daten im Stahlbau N2 - Datenaustausch, Daten resp. Produktdatenmodelle sind seit mehreren Jahren Themen in der Forschung. Verschiedene Forschungsprojekte und Initiativen diverser Firmen führten zu bereichsübergreifenden Ansätzen wie IFC und verschiedenen STEP-AP´s. Speziell im Stahlbau sind die Projekte >Produktschnittstelle Stahlbau< und >CIMsteel< entwickelt, weiterentwickelt und überarbeitet worden. Als Weiterentwicklung der bisher existierenden Austauschformate versuchen neuere Ansätze den Nutzen über die reine Datenübermittlung hinaus zu erweitern. So integrieren diese Lösungsvorschläge Aspekte der Kommunikation, der Zusammenarbeit und des Managements. Des weiteren übernehmen sie Aufgaben der Daten- und Modellverwaltung. Somit erfolgt eine digitale Abbildung unter Einbezug sämtlicher ermittelter Daten. Resultierend aus den besonderen Randbedingungen im Bauwesen, wird ein Bauwerksmodell aus untereinander in Beziehung gesetzten Domänenmodellen aufgebaut KW - Datenaustausch KW - CAD KW - Stahlbau Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6146 ER - TY - CHAP A1 - Burghardt, Michael A1 - Meißner, Udo F. T1 - Dreidimensionale Finite-Element-Baugrundmodelle für Ingeniuerprobleme N2 - Bei komplexen Gründungskonstruktionen sind Planungsfehler durch eine konsistente Modellierung vermeidbar. Manuelle Berechnungsmethoden ermöglichen im allgemeinen ein dreidimensionales Vorgehen nicht. Numerische Berechnungsmethoden, wie z.B. die Finite-Element-Methode, sind ein optimales Werkzeug zur ganzheitlichen Simulation des Problems. Die für die Finite-Element-Analyse notwendige Diskretisierung komplexer Bau- grundstrukturen ist manuell nicht zu bewältigen. Der vorliegende Beitrag zeigt wie ein Finite-Element-Modell automatisch aus einem geotechnischen Modell unter Berücksichtigung der spezifischen Anforderungen der Baugrund-Tragwerk-Struktur und des Bauablaufes erzeugt werden kann. Hierbei wird die Berücksichtigung der geometrischen und der mechanischen Besonderheiten bei der Netzgenerierung dargestellt. KW - Baugrund KW - Mathematisches Modell KW - Dreidimensionales Modell KW - Finite-Elemente-Methode Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5750 ER - TY - CHAP A1 - Bédard, Claude A1 - Mora, Rodrigo A1 - Rivard, Hugues T1 - A Framework for Computer-Aided Conceptual Design of Building Structures N2 - This paper describes a framework for computer-aided conceptual design of building structures that results from building architectural considerations. The central task that is carried out during conceptual design is the synthesis of the structural system. This paper proposes a methodology for the synthesis of structural solutions. Given the nature of architectural constraints, user-model interactivity is devised as the most suitable computer methodology for driving the structural synthesis process. Taking advantage of the hierarchical organization of the structural system, this research proposes a top-down approach for structural synthesis. Through hierarchical refinement, the approach lends itself to the synthesis of global and local structural solutions. The components required for implementing the proposed methodology are briefly described. The main components have been incorporated in a proof-of-concept prototype that is being tested and validated with actual buildings. KW - Konzipieren KW - Bauwerk KW - Software Engineering Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1018 ER - TY - CHAP A1 - Bürgy, Christian A1 - Garrett, James H. T1 - Supporting Domain Experts in Determining Viable User Interface Designs for Wearable Computers Used in AEC Work Situations N2 - The design of mobile IT systems, especially the design of wearable computer systems, is a complex task that requires computer science knowledge, such as that related to hardware configuration and software development, in addition to knowledge of the domain in which the system is intended to be used. Particularly in the AEC sector, it is necessary that the support from mobile information technology fit the work situation at hand. Ideally, the domain expert alone can adjust the wearable computer system to achieve this fit without having to consult IT experts. In this paper, we describe a model that helps in transferring existing design knowledge from non-AEC domains to new projects in the construction area. The base for this is a model and a methodology that describes the usage scenarios of said computer systems in an application-neutral and domain-independent way. Thus, the actual design information and experience will be transferable between different applications and domains. KW - Mobile Computing KW - Funknetz KW - Benutzeroberfläche KW - Mensch-Maschine-Kommunikation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1168 ER - TY - CHAP A1 - Cacao, Isabel T1 - Constructive Aspects of Monogenic Function Theory N2 - As it is well known, the approximation theory of complex valued functions is one of the main fields in function theory. In general, several aspects of approximation and interpolation are only well understood by using methods of complex analysis. It seems natural to extend these techniques to higher dimensions by using Clifford Analysis methods or, more specific, in lower dimensions 3 or 4, by using tools of quaternionic analysis. One starting point for such attempts has to be the suitable choice of complete orthonormal function systems that should replace the holomorphic function systems used in the complex case. The aim of our contribuition is the construction of a complete orthonormal system of monogenic polynomials derived from a harmonic function system by using sistematically the generalized quaternionic derivative KW - Komplexe Funktion KW - Quaternion Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2848 ER - TY - CHAP A1 - Cerejeiras, Paula T1 - Hyperbolic Qp-scales N2 - The Qp-scales were first introduced in [1] as interpolation spaces between the Bloch and Dirichlet spaces in the complex space. ... However, such treatment presents the disadvantage of only considering the Euclidean case. In order to obtain an approach to homogeneous hyperbolic manifolds, the projective model of Gel'fand was retaken in [2]. With the help of a convenient fundamental solution for the hyperbolic (homogeneous of degree ®) D® (see [5]) it was introduced in [7] and [3] equivalent Qp scales for homogeneous hyperbolic spaces. In this talk we shall present and study some properties of this hyperbolic scale. KW - Quaternion Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2853 ER - TY - CHAP A1 - Changwan, Kim A1 - Haas, Carl A1 - Caldas, Carlos T1 - Spatial data acquisition, integration, and modeling for real-time project life-cycle applications N2 - Current methods for site modeling employs expensive laser range scanners that produce dense point clouds which require hours or days of post-processing to arrive at a finished model. While these methods produce very detailed models of the scanned scene, useful for obtaining as-built drawings of existing structures, the associated computational time burden precludes the methods from being used onsite for real-time decision-making. Moreover, in many project life-cycle applications, detailed models of objects are not needed. Results of earlier research conducted by the authors demonstrated novel, highly economical methods that reduce data acquisition time and the need for computationally intensive processing. These methods enable complete local area modeling in the order of a minute, and with sufficient accuracy for applications such as advanced equipment control, simple as-built site modeling, and real-time safety monitoring for construction equipment. This paper describes a research project that is investigating novel ways of acquiring, integrating, modeling, and analyzing project site spatial data that do not rely on dense, expensive laser scanning technology and that enable scalability and robustness for real-time, field deployment. Algorithms and methods for modeling objects of simple geometric shape (geometric primitives from a limited number of range points, as well as methods provide a foundation for further development required to address more complex site situations, especially if dynamic site information (motion of personnel and equipment). Field experiments are being conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach. KW - Bauwerk KW - Datenmanagement KW - Echtzeitsystem KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1280 ER - TY - CHAP A1 - Chen, Zhen A1 - Kong, Stephen A1 - Li, Heng A1 - Xu, Qian T1 - Evaluating IT Applications for Innovative Construction Management N2 - The construction management has been under pressure to reduce operating costs and to improve productivity using innovative information technologe (IT) solutions conformed to structural characteristics, site conditions and past experiences. Given the growing emphasis on effectiveness and efficiency in construction projects, there is an imminent need to develop a formal procedure to select the best IT application for each proposed construction project and research and development (R&D) project. As there are numerous factors that have to be considered in selecting appropriate IT in a given situation, decision-makers need to have multicriteria decision-making ability. To enable them to make the most appropriate decision in any situation, it is important that effective tools incorporating multicriteria decision-making techniques are available. In this paper, an Analytic Network Process (ANP) model is conducted for the selection of appropriate IT application for innovative construction management prior to construction or research. The paper concludes that the ANP is a viable and capable tool for conducting IT application selection in multicriteria decision-making environment. KW - Bauführung KW - Software Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-994 ER - TY - CHAP A1 - Cheng, Jinxing A1 - Lau, Gloria A1 - Law, Kincho T1 - A simulation access language and framework for project management applications N2 - As computer programs become ever more complex, software development has shifted from focusing on programming towards focusing on integration. This paper describes a simulation access language (SimAL) that can be used to access and compose software applications over the Internet. Specifically, the framework is developed for the integration of tools for project management applications. The infrastructure allows users to specify and to use existing heterogeneous tools (e.g., Microsoft Project, Microsoft Excel, Primavera Project Planner, and AutoCAD) for simulation of project scenarios. This paper describes the components of the SimAL language and the implementation efforts required in the development of the SimAL framework. An illustration example bringing on-line weather forecasting service for project scheduling and management applications is provided to demonstrate the use of the simulation language and the infrastructure framework. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1567 ER - TY - CHAP A1 - Cheung, Moe M. S. A1 - Noruziaan, Bahman A1 - Li, W. C. T1 - Data acquisition, processing and management systems for a Canadian bridge monitoring project N2 - This paper will present a number of technical aspects for one of the most elaborate instrumentation and data acquisition projects ever undertaken in Canada. Confederation Bridge, the longest bridge built over ice covered seawater has been equipped with the state of the art data acquistition devices and systems as well as data transfer networks. The Bridge has been providing a fixed surface connection between Prince Edward Island and Province of New Brunswick in Canada since its opening in 1997. The Bridge has a rather long design service life of 100 years. Because of its large size and long span length, its design is not covered by any existing codes or standards worldwide. The focus of the paper is to introduce the data acquisition, transfer, processing and management systems. The instrumentation and communications infrastructure and devices will be presented in some details along with the data processing and management systems and techniques. Teams of engineers and researchers use the collected data to verify the analysis and design assumptions and parameters as well as investigate the short-term and long-term behaviour and health of the Bridge. The collected data are also used in furthering research activities in the field of bridge engineering and in elevating our knowledge about behaviour, reliability and durability of such complex structures, their components and materials. KW - Bauwerk KW - Datenmanagement KW - Brückenbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1235 ER - TY - CHAP A1 - Chou, Yu-Hur A1 - Hsieh, Shang-Hsien T1 - Design of Partial Scoring Assessment System for Reinforcement Concrete Design Course : Development of Partial Scoring Assessment System for Reinforcement Concrete Design Course N2 - In the field of Civil Engineering, the content of reinforcement concrete design course (RC course) has complicated design procedures and many difficult specifications to recognize, so most of the students regard the RC course a tough course, and teachers very often find the class time insufficient. Also, teachers of the RC course usually spend a lot of time in organizing the examinations for handling tedious calculations and complicated logical reasoning. Furthermore, correcting examination papers with partial scoring takes even more time of the teacher’s. Therefore, the objective of this research is to design and develop a partial scoring assessment system to meet the needs in engineering design courses, such as the RC course. This assessment system can generate test items with variable parameters. It also supports inference diagnosis on the examinee’s misconceptions and gives partial scores in grading the examination. In this research, the example test subject is the analysis of rectangular reinforced concrete beam with single layer steel bars. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Stahlbeton Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-905 ER - TY - CHAP A1 - Christov, Christo T. A1 - Petkov, Zdravko B. T1 - DETERMINATION OF THE DYNAMIC STRESS INTENSITY FACTOR USING ADVANCED ENERGY RELEASE EVALUATION N2 - In this study a simple effective procedure practically based upon the FEM for determination of the dynamic stress intensity factor (DSIF) depending on the input frequency and using an advanced strain energy release evaluation by the simultaneous release of a set of fictitious nodal spring links near the crack tip is developed and applied. The DSIF is expressed in terms of the released energy per unit crack length. The formulations of the linear fracture mechanics are accepted. This technique is theoretically based upon the eigenvalue problem for assessment of the spring stiffnesses and on the modal decomposition of the crack shape. The inertial effects are included into the released energy. A linear elastic material, time-dependent loading of sine type and steady state response of the structure are assumed. The procedure allows the opening, sliding and mixed modes of the structure fracture to be studied. This rational and powerful technique requires a mesh refinement near the crack tip. A numerical test example of a square notched steel plate under tension is given. Opening mode of fracture is studied only. The DSIF is calculated using a coarse mesh and a single node release for the released energy computation as well a fine mesh and simultaneous release of four links for more accurate values. The results are analyzed. Comparisons with the known exact results from a static loading are presented. Conclusions are derived. The values of the DSIF are significantly larger than the values of the corresponding static SIF. Significant peaks of the DSIF are observed near the natural frequences. This approach is general, practicable, reliable and versatile. KW - Bruchmechanik KW - Dynamische Belastung KW - Spannungsintensitätsfaktor KW - Eigenwertproblem Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5770 ER - TY - CHAP A1 - Christov, Christo T. A1 - Petrova, Lyllia B. T1 - Computer-Aided Static Analysis of Complex Prismatic Orthotropic Shell Structures by the Analytical Finite Strip Method N2 - The paper describes a development of the analytical finite strip method (FSM) in displacements for linear elastic static analysis of simply supported at their transverse ends complex orthotropic prismatic shell structures with arbitrary open or closed deformable contour of the cross-section under general external loads. A number of bridge top structures, some roof structures and others are related to the studied class. By longitudinal sections the prismatic thin-walled structure is discretized to a limited number of plane straight strips which are connected continuously at their longitudinal ends to linear joints. As basic unknowns are assumed the three displacements of points from the joint lines and the rotation to these lines. In longitudinal direction of the strips the unknown quantities and external loads are presented by single Fourier series. In transverse direction of each strips the unknown values are expressed by hyperbolic functions presenting an exact solution of the corresponding differential equations of the plane straight strip. The basic equations and relations for the membrane state, for the bending state and for the total state of the finite strip are obtained. The rigidity matrix of the strip in the local and global co-ordinate systems is derived. The basic relations of the structure are given and the general stages of the analytical FSM are traced. For long structures FSM is more efficient than the classic finite element method (FEM), since the problem dimension is reduced by one and the number of unknowns decreases. In comparison with the semi-analytical FSM, the analytical FSM leads to a practically precise solution, especially for wider strips, and provides compatibility of the displacements and internal forces along the longitudinal linear joints. KW - Tragwerk KW - Schale KW - Orthotropes Bauteil KW - CAD KW - Finite-Streifen Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4358 ER - TY - CHAP A1 - Christov, Christo T. A1 - Petrova, Lyllia B. T1 - COMPARISON OF SOME VARIANTS OF THE FINITE STRIP METHOD FOR ANALYSIS OF COMPLEX SHELL STRUCTURES N2 - The subject of this paper is to explore and evaluate the semi-analytical, analytical and numerical versions of the finite strip method (FSM) for static, dynamic and stability analyses of complex thin-walled structures. Many of bridge superstructures, some roof and floor structures, reservoirs, channels, tunnels, subways, layered shells and plates etc. can be analysed by this method. In both semi-analytical and analytical variants beam eigenvalue vibration or stability functions, orthogonal polynomials, products of these functions are used as longitudinal functions of the unknowns. In the numerical FSM spline longitudinal displacement functions are implemented. In the semi-analytical and numerical FSM conventional transverse shape functions for displacements are used. In the analytical FSM the accurate function of the strip normal displacement and the plane stress function are applied. These three basic variants of the FSM are compared in quality and quantity in view to the following: basic ideas, modelling, unknowns, DOF, a kind and order of the strips, longitudinal and transverse displacement and stress functions, compatibility requirements, boundary conditions, ways for obtaining of the strip stiffness and load matrices, a kind and size of the structure stiffness matrix and its band width, mesh density, necessary number of terms in length, accuracy and convergence of the stresses and displacements, approaches for refining results, input and output data, computer resources used, application area, closeness to other methods, options for future development. Numerical example is presented. Advantages and shortcomings are pointed. Conclusions are given. KW - Schale KW - Finite-Streifen-Methode KW - Variantenvergleich Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5760 ER - TY - CHAP A1 - Chudoba, Rostislav A1 - Butenweg, Christoph A1 - Pfeiffer, Frank T1 - Textile Reinforced Concrete Part I: Process Model for Collaborative Research and Development N2 - The goal of the collaborative research center (SFB 532) >Textile reinforced concrete (TRC): the basis for the development of a new material technology< installed in 1998 at the Aachen University is a complex assessment of mechanical, chemical, economical and productional aspects in an interdisciplinary environment. The research project involves 10 institutes performing parallel research in 17 projects. The coordination of such a research process requires effective software support for information sharing in form of data exchange, data analysis and data archival. Furthermore, the processes of experiment planning and design, modification of material compositions and design parameters and development of new material models in such an environment call for systematic coordination applying the concepts of operational research. Flexible organization of the data coming from several sources is a crucial premise for a transparent accumulation of knowledge and, thus, for a successful research in a long run. The technical information system (TRC-TIS) developed in the SFB 532 has been implemented as a database-powered web server with a transparent definition of the product and process model. It serves as an intranet server with access domains devoted to the involved research groups. At the same time, it allows the presentation of selected results just by granting a data object an access from the public area of the server via internet. KW - Beton KW - Bewehrung KW - Textilfaser KW - Datenbank Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2866 ER - TY - CHAP A1 - Contensin, M. A1 - Maltret, J.-L. T1 - Computer Aided Lighting for architects and designers N2 - Designing lightings in a 3D-scene is a general complex task for building conception as it is submitted to many constraints such as aesthetics or ergonomics. This is often achieved by experimental trials until reaching an acceptable result. Several rendering softwares (such as Radiance) allow an accurate computation of lighting for each point in a scene, but this is a long process and any modification requires the whole scene to be rendered again to get the result. The first guess is empirical, provided by experience of the operator and rarely submitted to scientific considerations. Our aim is to provide a tool for helping designers to achieve this work in the scope of global illumination. We consider the problem when some data are asked for : on one hand the mean lighting in some zones (for example on a desktop) and on the other hand some qualitative information about location of sources (spotlights on the ceiling, halogens on north wall,...). The system we are conceiving computes the number of light sources, their position and intensities, in order to obtain the lighting effects defined by the user. The algorithms that we use bind together radiosity computations with resolution of a system of constraints. KW - Architektur KW - Beleuchtung KW - CAD Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4488 ER - TY - CHAP A1 - Counsell, John T1 - Spatial Database Management and Generation of VRML Models N2 - The cost of keeping large area urban computer aided architectural design (CAAD) models up to date justifies wider use and access. This paper reviews the potential for collaborative groupwork creation and maintenance of such models and suggests an approach to data entry, data management and generation of appropriate levels of detail models from a Geographic Information System (GIS). Staff at the University of the West of England (UWE) modelled a large area of Bristol to demonstrate millennium landmark proposals. It became swiftly apparent that continued amendment of the model to keep it an accurate reflection of changes on the ground was a major data management problem. Piecing in new CAAD models received from Architectural Practices to visualise them in context as part of the planning negotiation process has often taken staff several days of work for each instance. The model is so complex and proprietary that Bristol City operates a specialist visualisation bureau service. UWE later modelled the environs of the Tower of London to support bids for funding and to provide the context for judging the visual impact of iterative design development. Further research continued to develop more effective approaches to. Data conversion and amalgamation from all the diverse sources was the major impediment to effective group working to create the models. It became apparent that a GIS would assist retrieving all the appropriate data that described the part of the model under creation. It was possible to predict that management of many historic part models stepping back through time, allowing for different expert interpretations to co-exist would be in itself a major task requiring a spatial database/GIS. UWE started afresh from the original source data, to explore the collaborative use of GIS and Virtual Reality Modelling Language (VRML) to integrate models and interventions from various sources and to generate an overall navigable interactive whole. Current exploration of the combination of event driven behaviours and Structured Query Language is seeking to define how appropriately to modify objects in the VRML model on demand. This is beginning to realise the potential for use of this process for: asynchronous group modelling on the lines of a collaborative virtual design studio; historic building maintenance management; visitor management; interpretation of historic sites to visitors and public planning information. KW - Raumordnung KW - Visualisierung KW - CAD / Architektur KW - Geographic Information System Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5791 ER - TY - CHAP A1 - Daniunas, A. A1 - Komka, A. A1 - Werner, F. T1 - ANALYSIS AND DETERMINATION OF STRENGTH IN PLASTIC STAGE OF FREE FORM STEEL SHAPES N2 - The steel structure design codes require to check up the member strength when evaluating plastic deformations. The model of perfectly plastic material is accepted. The strength criteria for simple cross-sections (I section, etc.) of steel members are given in design codes. The analytical strength criteria for steel cross-sections and numerical approaches based on stepwise procedure are investigated in many articles. Another way for checking the carrying capacity of cross-sections is the use of methods that are applied for defining strain-deformed state of elastic perfectly plastic systems. In this paper non-iterative methods are suggested for checking strength of cross-sections. Carrying capacity of cross section is verified according to extremum principle of plastic fail under monotonically loading and the strain-deformed state of cross-section is defined according to extremum energy principals of elastic potential of residual stresses and complementary work of residual displacements. The mathematical expressions of these principals for discrete cross-section are formulated as problems of convex mathematical programming. The cross-section of steel member using finite element method is divided into free form plane elements. The constant distribution of stresses along the finite element is accepted. The relationships of finite elements for static formulation of the problem are formed so, that kinematics formulation relationships could be obtained in a formal way using the theory of duality. Numerical examples of determination of cross-section strength, composition of interactive curves and composition of moment-curvature curves for different axial force levels are presented. KW - Stahlkonstruktion KW - Plastische Deformation KW - Mathematisches Modell KW - Finite-Elemente-Methode Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5803 ER - TY - CHAP A1 - Diaz, Joaquin A1 - Meißner, Udo F. A1 - Schönenborn, I. T1 - Modellierung zeitabhängiger 3D-Modelle in der Geotechnik N2 - Aufgrund der steigenden quantitativen und qualitativen Anforderungen an den Bauplanungsprozeß wird in den letzten Jahren nach neuen Lösungsansätzen gesucht, mit deren Hilfe der Bauplanungsprozeß den gestiegenen Anforderungen angepaßt werden kann. Ein Lösungsansatz hierzu stellt die durchgängig computergestützte, dreidimensionale und zeitabhängige Modellierung und Verwaltung des Bauplanungsprozesses beginnend bei der Vorplanung bis hin zum Recycling des Bauobjektes am Ende seiner Lebensdauer dar. Der vorliegende Beitrag zeigt auf, daß gerade der zeitliche Verlauf innerhalb einer geotechnischen Aufgabenstellung einen nicht unerheblichen Einfluß auf die verwendeten Modelle bzw. die Durchführung von Sicherheitsnachweisen ausübt. Für die Entwicklung geotechnischer Softwaresysteme ergibt sich daraus schon innerhalb der Analysephase die Anforderung, die zeitkritischen Abhängigkeiten zu modellieren und entsprechend im Entwurf zu berücksichtigen. Hierfür hat sich die objektorientierte Methode in Form des Objektmodells und des dynamischen Modells nach Rumbaugh als ein geeignetes Werkzeug herausgestellt. Die dabei gewonnenen Erkenntnisse und Ergebnisse können bereits sehr früh in die Konzeption des Gesamtsystems mit einbezogen werden. Am Beispiel des Geotechnischen Informationssystems (GTIS) führte dies zu einer raum- und zeitabhängigen Verwaltung des Boden- und Konstruktionsmodells und zu einer Bauablaufsteuerung, innerhalb derer die einzelnen Bauzustände verwaltet und mit den entsprechenden Ausprägungen innerhalb des dreidimensionalen Boden- und Konstruktionsmodells verknüpft werden können. KW - Geotechnik KW - Zeitabhängigkeit KW - Dreidimensionales Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4324 ER - TY - CHAP A1 - Donath, Dirk A1 - Liedtke, Maren A1 - Petzold, Frank T1 - Aktuelle Geräte und IT - Unterstützung in der architektonischen Bestandsaufnahme - Grenzen, Möglichkeiten & Visionen N2 - Im Rahmen des Sonderforschungsbereiches 524 ist das primäre Anliegen des Teilprojektes D2 die Entwicklung von Methoden und Techniken zur Aufnahme von Bestandsdaten vor Ort oder durch Auswertung vorhandener Dokumentationen und deren direkte Integration in ein Bauwerksmodell. [15] Das Vorhaben erarbeitet Grundlagen zu Aspekten der fachplanerischen Nutzung und der wissenschaftlichen Auswertungen arbeitsmethodischer Vorgehensweisen in der Bestandsaufnahme unter Einbeziehung softwaretechnischer Methoden. Dabei finden Sachverhalte der Strukturierung, die Herausarbeitung von Systematiken der wesentlichen Informations-/Datenmengen, die Ableitung von Methoden zur zerstörungsfreien Erfassung und die Darstellung planungsrelevanter Gebäudeinformationen in digitalen Systemen Berücksichtigung. Beim Bauaufmaß werden neben traditionellen Methoden und Techniken längst geodätische Verfahren wie die Tachymetrie, die Photogrammetrie und die Handlaserentfernungsmessung einbezogen. In der Praxis des Bestandsaufmaßes repräsentiert gegenwärtig die Tachymetrie, das am häufigsten zur Innen- und Außenaufnahme von Gebäuden eingesetzte geodätische Vermessungsverfahren. [9] [3] Ausgehend von der heutigen Situation in der Bestandsaufnahme wird aufgezeigt, inwieweit es nach dem gegenwärtigen Stand der Technik möglich ist, die in der Geodäsie verwendeten Tachymeter direkt in der Bestandsaufnahme einzusetzen. In einem weiteren Schwerpunkt wird die Konzeption eines rechnergestützten Bauaufnahmesystems basierend auf reflektorlos messenden tachymetrischen Geräten beschrieben. Das Konzept berücksichtigt nicht nur das Bauaufmaß, sondern unterstützt adäquat den gesamten Prozeß der Bauaufnahme – von der Erstbegehung bis hin zur konstruktiven Gliederung. Abschließend werden tendenzielle Möglichkeiten in der Bauaufnahme diskutiert. KW - Bauaufnahme KW - Datenerfassung KW - Dateneingabegerät Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6220 ER - TY - CHAP A1 - Donath, Dirk A1 - Petzold, Frank A1 - Tscherepanow, Ronald A1 - Thurow, Torsten T1 - Geometrieabbildung in der planungsrelevanten Bauaufnahme N2 - Im Rahmen des Sonderforschungsbereiches 524 “Konstruktionen und Werkstoffe für die Revitalisierung von Bauwerken“1 ist das primäre Anliegen des Teilprojektes D2 „Bauplanungsrelevantes digitales Gebäudeaufnahme- und Informationssystem“ die Entwicklung von Methoden und Techniken zur Aufnahme von Bestandsdaten vor Ort oder durch Auswertung vorhandener Dokumentationen und deren direkte Integration in ein Bauwerksmodell [11]. Das Vorhaben erarbeitet Grundlagen zu Aspekten der fachplanerischen Nutzung und der wissenschaftlichen Auswertungen arbeitsmethodischer Vorgehensweisen in der Bestandsaufnahme unter Einbeziehung softwaretechnischer Methoden. Dabei finden Sachverhalte der Strukturierung, die Herausarbeitung von Systematiken der wesentlichen Informations-/Datenmengen, die Ableitung von Methoden zur zerstörungsfreien Erfassung und die Darstellung planungsrelevanter Gebäudeinformationen in digitalen Systemen Berücksichtigung. In diesem Artikel werden ausgehend von Anforderungen der planungsrelevanten architektonischen Bauaufnahme eine Konzeption und die prototypische Realisierung zur flexiblen geometrischen Erfassung – dem Bauaufmaß – vorgestellt. Planungsrelevante Bauaufnahme Die Bauaufnahme dient der Modellbildung durch Erfassung und Wiedergabe eines real existenten Bauwerkes in seinem zum Zeitpunkt der Aufnahme angetroffenen Zustand. Die quasi vollständige Aufnahme ist aufgrund der großen zu ermittelnden Datenmengen und den hierdurch entstehenden Aufwendungen und Kosten nicht möglich [8]. Vielmehr muß eine Auswahl und Abstrahierung der aufzunehmenden Daten, ihrer Repräsentation und die Wahl ihrer Genauigkeit nach den Erfordernissen des jeweiligen Verwendungszweckes der Bauaufnahme erfolgen. So vielfältig die Erfordernisse einer Bauaufnahme ausfallen, so vielfältig sind auch die jeweiligen Forderungen und Auswahlen der aufzunehmenden Daten. In der überwiegenden Mehrheit aller Fälle ist auch die Wiedergabe der vorgefundenen geometrischen Ausprägung des Bauwerkes gewünscht oder erforderlich. Dabei werden unterschiedliche Genauigkeitsanforderungen an verschiedene Bereiche des Bauwerkes gestellt [9] [10]. So reicht vielleicht im Einzelfall eine skizzenhafte Wiedergabe des Umfeldes eines geplanten Ladenbereiches, während die umzunutzenden Bereiche in Ausführungsgenauigkeit zu erfassen sind. Die exakte geometrische Ausprägung eingebauter Bauelemente ist oft nur teilweise bekannt. In der Bauaufnahme muß ein enger Zusammenhang zwischen Geometrie und bauteilorientierter Konstruktion, sowie den verwendeten Ordnungssystemen bestehen. Um diesen Ansprüchen genüge zu tragen, werden entsprechende Aufnahmetechniken, rechnerinterne Abbildungen und Funktionalität zur Interaktion Nutzer - Modell gesucht. KW - Bauplanung KW - Bauaufnahme KW - Bildverarbeitung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6214 ER - TY - CHAP A1 - Donath, Dirk A1 - Tonn, Christian T1 - Plausibility in Architectural Design - Software Support for the Architect-oriented Design of Colour Schemes for Interiors and Buildings N2 - The approach discussed here is part of research into an overall concept for digital instruments which support the entire planning process and help in enabling planning decisions to be based upon clear reasoning and plausible arguments. Such specialist systems must take into account currently available technology, such as networked working patterns, object-orientation, building and product models as well as the working method of the planner. The paper describes a plausibility instrument for the formulation of colour scheme proposals for building interiors and elevations. With the help of intuitively usable light simulations, colour, material and spatial concepts can be assessed realistically. The software prototype “Coloured Architecture” is conceived as a professional extension to conventional design tools for the modelling of buildings. As such it can be used by the architect in the earliest design phases of the planning process as well as for colour implementation on location. KW - CAD / Architektur KW - Farbenlehre Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1498 ER - TY - CHAP A1 - Ducke, M. A1 - Eckstein, U. A1 - Montag, U. T1 - Die Eisenbahnbrücken des Lehrter Bahnhofs in Berlin - Ein ganzheitliches FE-Berechnungskonzept N2 - Der Komplexität moderner Brückenbauwerke scheinen die verwendeten Berechungsmodelle oft nicht angemessen. Tragwerksberechnungen basieren in vielen Fällen noch auf der Vorgehensweise, das Brückenbauwerk in Einzelbauteile zu zerlegen und mit unterschiedlichen Teilmodellen zu behandeln. Das erscheint, auch vor dem Hintergrund ständig wachsender Rechnerleistung, nicht mehr zeitgemäß. Dies gilt zum Beispiel auch für die gängige Praxis, flächenhafte Brückenüberbauten mit Balkenmodellen zu berechnen. Der vorliegende Beitrag stellt ein ganzheitliches Berech-nungskonzept vor, welches auf der Basis eines einzigen FE-Modells die Berechnung des Gesamtbauwerks erlaubt. Damit wird für alle Bauteile neben der Zustandsgrößenberechnung auch die Bemessung von Stahl- und Spannbetonbauteilen bis hin zu Nachweisen wie zur Beschränkung der Rissbreite geführt. Die Anwendung dieses Berechnungskonzeptes wird am Beispiel der Eisenbahnüberführung des neuen Lehrter Bahn-hofs in Berlin gezeigt. Das verwendete FE-Modell umfasst Baugrund, Fundamente, Stahl- bzw. Gußstahlunterkonstruktion sowie den Stahl- bzw. Spannbetonüberbau. Besonderheiten sind unter anderem die Modellierung des plattenbalkenartigen Überbaus durch exzentrische, vorspannbare Schalenelemente und das getrennte Vorhalten von tragwerks- und lastbezogenen Eingabefiles. Damit gelingt die sequentielle Erfassung unterschiedlicher Bettungsmoduli zur Simulation statischer und dynamischer Beanspruchungen, die Berücksichtigung des Anspannens und der Interaktion zwischen vorgespannten Stahlverbänden zur Aufnahme von Horizontallasten sowie die Berücksichtigung unterschiedlicher statischer Systeme bei der Herstellung des Spannbetonüberbaus. KW - Berlin KW - Eisenbahnbrücke KW - Berechnung KW - Finite-Elemente-Methode KW - Lehrter Bahnhof KW - Gesamtbauwerk Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5812 ER - TY - CHAP A1 - Dudek, Mariusz A1 - Richter, Matthias T1 - Zuverlässigkeit und strukturelle Parameter von Verkehrsnetzen N2 - Im Vortrag wird der Frage nachgegangen, inwieweit ein Zusammenhang zwischen der Zuverlässigkeit und gewissen strukturellen Parametern eines Verkehrsnetzes besteht. Das Verkehrsnetz wird hierzu als bewerteter Graph aufgefasst. Zur Analyse der Verkehrsnetzzuverlässigkeit werden die Kanten mit ihren Verfügbarkeiten (>Zuverlässigkeiten<) bewertet. Die Zuverlässigkeit des Verkehrsnetzes hat einen großen Einfluss auf die Beurteilung des Straßennetzes. Im Sinne einer Regressionsanalyse soll der Zusammenhang mit weiteren, speziell für die Betrachtung von Verkehrsnetzen entwickelten strukturellen Kenngrößen untersucht werden, das sind insbesondere die Dispersion des Verkehrsnetzes und die Unterentwicklung des Netzes. Aus der Vielzahl der theoretisch denkbaren Verkehrsnetzstrukturen spiegelt die Ring-Radius-Struktur die realen Straßennetze am besten wider. Solche Ring-Radius-Strukturen kommen in vielen Städten vor. Die Berechnung der Verkehrsnetzzuverlässigkeit erfolgt mittels eines Algorithmus, der auf dem Prinzip der vollständigen Enumeration aller möglichen Kombinationen der Verfügbarkeit bzw. Nichtverfügbarkeit der einzelnen Kanten basiert und die gewünschte Kenngröße exakt bestimmt. Obwohl der Algorithmus speziell auf eine möglichst geringe Rechenzeit ausgerichtet ist, bleibt das Verfahren doch numerisch recht aufwendig. An Hand von zehn verschiedenen Ring-Radius-Strukturen wird der Nachweis eines Zusammenhangs zwischen den strukturellen Kenngrößen und der Verkehrsnetzzuverlässigkeit geführt. Damit können mittels struktureller Bewertungen (die mit einem vergleichsweise geringen Aufwand an Input-Daten und Rechenzeit bestimmbar sind) Aussagen über die Zuverlässigkeit des Verkehrsnetzes getroffen werden. KW - Verkehrsnetz KW - Zuverlässigkeit KW - Graph KW - Regressionsanalyse Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2951 ER - TY - CHAP A1 - Dudek, Mariusz A1 - Rudnicki, Andrzej A1 - Hempel, Lorenz T1 - Zum Zusammenhang zwischen strukturellen und funktionellen Parametern eines Verkehrsnetzes N2 - Im Vortrag wird der Frage nachgegangen, inwieweit zwischen den strukturellen Parametern Dispersion eines Verkehrsnetzes bzw. der Kennziffer der Unterentwicklung eines Verkehrsnetzes und den mittleren Fahrzeiten bzgl. unterschiedlicher Verkehrsbedarfsmatrizen ein Zusammenhang besteht. An Hand von 10 verschiedenen Ring-Radius-Strukturen für den MIV (Motorisierter Individual-Verkehr) und 3 verschiedenen Ring-Radius-Strukturen für den Busverkehr wird bei 5 unterschiedlichen O-D-Bedarfsmatrizen der Nachweiß eines solchen Zusammenhanges geführt. Die Ergebnisse erlauben es, auf Grund struktureller Analysen Aussagen über funktionelle Bewertungen des Verkehrsnetzes zu treffen. Da strukturelle Bewertungen mit wesentlich geringerem Aufwand an Input-Daten und an Rechenzeit als funktionelle Bewertungen bestimmbar sind, bringt dies deutliche Einsparungen in der Planungsphase von Verkehrsnetzen mit sich. KW - Verkehrsplanung KW - Verkehrsnetz KW - Bedarfsermittlung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5985 ER - TY - CHAP A1 - Dzwigon, Wieslaw T1 - Qualität im ÖPNV – die Erhöhung und das Erhalten der Frequenz T1 - Qualität im ÖPNV - Die Möglichkeiten der Verbesserung und die optimale Gestaltung N2 - Um die entsprechende Qualität der ÖPNV zu erreichen, sollte man das Verhältnis zwischen der Bedienungsqualität und dem Kostenaufwand analysieren. In den Bedingungen der anwachsenden Konkurenz aus der Seite der PKW und anderen Fuhrunternehmern soll man die Handlungen, die grösste Effektivität gewährleisten, aufnehmen. Es gibt viele Möglichkeiten die diese Qualität verbessern können, wie z.B. steigernde Frequenz der Fahrzeuge, Vergrößerung der Geschwindigkeit, Pünktlichkeit und Regelmäßigkeit, Einführung der Niederfußfahrzeuge und vieles mehr. Ich versuche in meinem Referat die Aspekte zu analysieren, die mit der Frequenz verbunden sind, d.h. die Erhöhung der Frequenz und das Erhalten der konstanten Häufigkeit der Linienbusse. Das Referat umfasst die Modelle und die Beispiele. In Verbindung mit den Untersuchungen, die die Bereitschaft der Bezahlung für die Verbesserung der Qualität betreffen, kann man schon Entscheidungen treffen, die unterschiedlichen Standard der Fahrt bestimmen. KW - Öffentlicher Personennahverkehr KW - Optimierung KW - Kostenanalyse Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2968 ER - TY - CHAP A1 - Ebert, Matthias A1 - Bucher, Christian T1 - Modelling of changing of dynamic and static parameters of damaged R/C N2 - Dynamic testing for damage assessment as non-destructive method has attracted growing in-terest for systematic inspections and maintenance of civil engineering structures. In this con-text the paper presents the Stochastic Finite Element (SFE) Modeling of the static and dy-namic results of own four point bending experiments with R/C beams. The beams are dam-aged by an increasing load. Between the load levels the dynamic properties are determined. Calculated stiffness loss factors for the displacements and the natural frequencies show differ-ent histories. A FE Model for the beams is developed with a discrete crack formulation. Cor-related random fields are used for structural parameters stiffness and tension strength. The idea is to simulate different crack evolutions. The beams have the same design parameters, but because of the stochastic material properties their undamaged state isn't yet the same. As the structure is loaded a stochastic first crack occurs on the weakest place of the structure. The further crack evolution is also stochastic. These is a great advantage compared with de-terministic formulations. To reduce the computational effort of the Monte Carlo simulation of this nonlinear problem the Latin-Hypercube sampling technique is applied. From the results functions of mean value and standard deviation of displacements and frequencies are calcu-lated. Compared with the experimental results some qualitative phenomena are good de-scribed by the model. Differences occurs especially in the dynamic behavior of the higher load levels. Aim of the investigations is to assess the possibilities of dynamic testing under consideration of effects from stochastic material properties KW - Stahlbetonbauteil KW - Bruchmechanik KW - Dynamische Belastung KW - Statische Last KW - Finite-Elemente-Methode KW - Stochastisches Modell Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5825 ER - TY - CHAP A1 - El-Rayes, Khaled A1 - Kandil, Amr T1 - Distributed Computing for the Optimization of Large-Scale Construction Projects N2 - Available construction time-cost trade-off analysis models can be used to generate trade-offs between these two important objectives, however, their application is limited in large-scale construction projects due to their impractical computational requirements. This paper presents the development of a scalable and multi-objective genetic algorithm that provides the capability of simultaneously optimizing construction time and cost large-scale construction projects. The genetic algorithm was implemented in a distributed computing environment that utilizes a recent standard for parallel and distributed programming called the message passing interface (MPI). The performance of the model is evaluated using a set of measures of performance and the results demonstrate the capability of the present model in significantly reducing the computational time required to optimize large-scale construction projects. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Verteiltes System KW - Planung KW - Großbaustelle KW - Optimal Planning Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1601 ER - TY - CHAP A1 - Eslimy-Isfahany, S. H. R. A1 - Pegels, Georg T1 - Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran N2 - The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Iran Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1421 ER - TY - CHAP A1 - Fahrig, Torsten A1 - Nachtwey, Björn A1 - Gellert, Sebastian T1 - A Product Model based Approach to Interactive CAE Design Optimization N2 - We present a software prototype for fluid flow problems in civil engineering, which combines essential features of Computational Steering approaches with efficient methods for model transfer and high performance computing. The main components of the system are described: - The modeler with a focus on the data management of the product model - The pre-processing and the post-processing toolkit - The simulation kernel based on the Lattice Boltzmann method - The required hardware for real-time computing KW - Produktmodell KW - Simulation KW - Bautechnik KW - Entwurf KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1901 ER - TY - CHAP A1 - Fedior, Marco A1 - Hamel, Wido ED - Steiner, Maria ED - Theiler, Michael ED - Mirboland, Mahsa T1 - Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien T2 - 30. Forum Bauinformatik N2 - Der vorliegende Beitrag beschreibt die Problematik bei der Prognose verkehrsbedingter Schadstoff-Immissionen. Im Mittelpunkt steht die Entwicklung und der Aufbau einer Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien. Die Simulationsumgebung wird über die drei Felder Verkehr, Emission, Immission entwickelt und findet zunächst Anwendung in der Evaluation verkehrlicher Maßnahmen für die Friedberger Landstraße in Frankfurt am Main. KW - Verkehr KW - Simulation KW - Emission KW - Luftverunreinigender Stoff Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190328-38678 ER - TY - CHAP A1 - Flemming, Ulrich A1 - Snyder, J. T1 - Building and Databases: the SEED Experience N2 - We describe the database requirements of SEED (Software Environment to Support the Early Phases in Building Design). The requirements are typical for a database that intends to support a heterogeneous design support environment consisting of independent software modules with diverse internal design models, requirements not met by any commercial database system. The design and implementation of this database is an integral part of the overall software engineering effort. We describe the SEED approach that integrates external and in-house software based on a shared information model specified in the modeling language SPROUT, which allows for the specification of domains, and classes, relationship types and their behavior, and multiple classifications. The SPROUT run-time system organizes and coordinates the communication between the software modules and the database KW - Bauentwurf KW - Datenbank Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4151 ER - TY - CHAP A1 - Flood, Ian A1 - Issa, Raja A1 - Abu-Shdid, Caesar T1 - Developments in Hyper Real-Time Simulation of Transient Heat-Flow in Buildings N2 - This paper reports on the latest results in the development of a new approach for simulating the thermal behavior of buildings that overcomes the limitations of conventional heat-transfer simulation methods such as FDM and FEM. The proposed technique uses a coarse-grain approach to model development whereby each element represents a complete building component such as a wall, internal space, or floor. The thermal behavior of each coarse-grain element is captured using empirical modeling techniques such as artificial neural networks (ANNs). The main advantages of the approach compared to conventional simulation methods are: (a) simplified model construction for the end-user; (b) simplified model reconfiguration; (c) significantly faster simulation runs (orders of magnitude faster for two and three-dimensional models); and (d) potentially more accurate results. The paper demonstrates the viability of the approach through a number of experiments with a model of a composite wall. The approach is shown to be able to sustain highly accurate longterm simulation runs, if the coarse-grain modeling elements are implemented as ANNs. In contrast, an implementation of the coarse-grain elements using a linear model is shown to function inaccurately and erratically. The paper concludes with an identification of on-going work and future areas for development of the technique. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Echtzeitverarbeitung KW - Konvektion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1961 ER - TY - CHAP A1 - Fojud, Artur T1 - Investment strategies over full cycle of life of a flexible pavement N2 - The pavement is one of the basic components of road infrastructure and, therefore, directly influences general levels of transport safety, as well as the quality of transportation services in human and cargo traffic. It also exerts a major influence on the final logistic costs of production and services in many aspects of everyday life. The continuity of transportation, which is closely tied to the development of a number of areas in the economy of every State, depends on the technical condition of the road pavement. Making proper investments in the complete course of life of the road pavement, a policy which makes sure that the conditions for continuous, safe, efficient, and economically optimised transportation are satisfied, is a priority for every administration managing municipal funds. If investments in the road pavement are not carried out properly, there usually are more and more road pavements the condition of which causes delays in transportation, and directly compromises traffic safety. Such a situation increases the running costs of vehicles, and decreases the transportation service levels and comfort of travelling. At the moment, the majority of pavements in Europe, (nearly 90% of all pavements) are flexible road pavements. Due to the prevalent number of flexible pavements in Europe, the author analyses investment in the course of full-time of life cycle of the pavements, with a stress on flexible pavements. The paper presents basic assumptions and definitions in the area of analysis of life cycle costs of a flexible road pavement, as well as profits associated with proper long range investment. The classification of damages to flexible road pavement has also been presented, and their influence on technical and use related assessment of road pavement conditions, basing on the traditional road pavement structures, with relation to the catalogue of typical flexible pavements used in Poland, as well as regarding French, British, and American experience in constructing long life road pavements. The second part of the paper discusses different investment strategies in the course of a full-time of life cycle of the road pavement, and proposes a procedure of evaluating investment strategies. The summary presents some assumptions for a global index of investment evaluation during the full-time of life cycle of a pavement, based on the Best Return Index (BRI). KW - Straßenbau KW - Lebenszyklus KW - Projektfinanzierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3146 ER - TY - CHAP A1 - Freundt, Martin T1 - Fuzzy Logik und Graphentheorie als Basis einer flexiblen Bauablaufplanung N2 - Der Bauablauf unterliegt vielen Unwägbarkeiten. Von besonderer Bedeutung ist dieses Problem im Umfeld der Revitalisierung von Bauwerken. In weiten Teilen sind die auszuführenden Arbeiten nur schwer im Vorfeld planbar. Die Ursachen hierfür liegen großteils in der Problematik des Bauens im Bestand und dem aus wirtschaftlichen Gründen geringen Umfang von Analysen. Häufig treten verdeckte, im Vorfeld der Baumaßnahme nicht erkannte Schäden auf oder Materialstrukturen und Bauteilqualitäten wurden in der Planung unzureichend berücksichtigt. Alte Ausführungsunterlagen sind oft nicht verfügbar. Viele zur Ausführung bestimmter Arbeiten nötige Informationen fehlen und werden erst zum unmittelbaren Ausführungszeitpunkt bekannt. Einzelne Arbeiten sind nur schwer kalkulierbar bzw. planbar. Sie sind in Art und Umfang zunächst nicht bekannt und müssen gegebenenfalls als neue Vorgänge im Plan berücksichtigt werden. Diese besondere Situation bedarf einer gezielten Berücksichtigung. Die Planung des Bauablaufes muss in einer flexiblen und leicht anpassbaren Art und Weise erfolgen. Im folgenden Beitrag wird ein Ansatz zur Entwicklung eines solchen Prozessmodells vorgestellt, der im Rahmen des SFB 524 >Werkstoffe und Konstruktionen für die Revitalisierung von Bauwerken< an der Bauhaus-Universität Weimar untersucht und vorangetrieben wurde und wird. Das vorgestellte Modell kann kurzfristig flexibel auf die realen Gegebenheiten reagieren und ermöglicht trotzdem eine Planung und Steuerung des gesamten Ablaufs. Es enthält nicht wie bisher üblich deterministische Daten in starren Anordnungsbeziehungen. Vielmehr werden die Daten der Prozesse und die Beziehungen der Prozesse untereinander in einer nichtdeterministischen, unscharfen Form modelliert.... KW - Bauablauf / Ablaufplanung KW - Fuzzy-Logik KW - Graphentheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2878 ER - TY - CHAP A1 - Freundt, Martin A1 - Beucke, Karl T1 - A flexible model for scheduling building processes based on graph theory and fuzzy numbers N2 - The methods currently used for scheduling building processes have some major advantages as well as disadvantages. The main advantages are the arrangement of the tasks of a project in a clear, easily readable form and the calculation of valuable information like critical paths. The main disadvantage on the other hand is the inflexibility of the model caused by the modeling paradigms. Small changes of the modeled information strongly influence the whole model and lead to the need to change many more details in the plan. In this article an approach is introduced allowing the creation of more flexible schedules. It aims towards a more robust model that lowers the need to change more than a few information while being able to calculate the important propositions of the known models and leading to further valuable conclusions. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Scheduling KW - Fuzzy-Logik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1587 ER - TY - CHAP A1 - Fruchter, Renate A1 - Chao, Yunn Chyi T1 - AEC Global Teamwork: Emergent Work Processes N2 - This ethnographic study reports on emerging work processes and practices observed in the AEC (Architecture/Engineering/Construction) Global Teamwork program, i.e., what people experience when interacting with and through collaboration technologies, why people practice in the way they do, how the practice fits into the environment and changes the work patterns. It presents the experience of two high-performance typical but extreme AEC teamwork cases adopting and adapting to collaboration technologies and how these technologies in practice impact their work processes. The findings illustrate the importance of collaboration technologies in cross-disciplinary, global teamwork. Observations indicate that high performance teams that use the collaboration technologies effectively exhibit collaboration readiness at an early stage and manage to define a “third way” to meet the demands of the cross-disciplinary, multi cultural and geographically distributed AEC workspace. The observations and implications represent the blueprint for yearly innovations and improvements to the design of the AEC Global Teamwork program. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1912 ER - TY - CHAP A1 - Fruchter, Renate A1 - Demian, Peter A1 - Saxena, Kushagra T1 - Discovery of Re-usable Architecture/Engineering Construction Knowledge Trough Exploration of a Corporate Memory : Chance Discovery of Reusable AEC Knowledge from a Corporate Memory N2 - Re-using knowledge in architecture, engineering and construction (AEC) firms can lead to greater competitive advantage, improved designs, and more effective management of constructed facilities. This paper discusses the importance of exploration and discovery of reusable knowledge from a corporate archive as opposed to simple search and retrieval. We describe and illustrate through a scenario of use an exploration framework and prototype, CoMemTM that formalizes the added value of exploration in the process of knowledge reuse. We discuss two exploration activities: (i) Breadth- Only overview exploration that assist a user to rapidly localize pockets of re-usable knowledge from the large corporate archive and (ii) Iterative breadth-depth exploration that enables a user to identify those re-usable components of the Corporate Memory that may yield design issues that were not originally considered. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1932 ER - TY - CHAP A1 - Fruchter, Renate A1 - Saxena, Kushagra A1 - Breidenthal, Matt T1 - Collaborative Exploration of Rich Content in Support of Knowledge Re-use N2 - A/E/C Team members, while collaborating on building projects, rely on past experiences and content through the use of project design archives (whether in paper or digital format). This leads to underutilization of potential knowledge, as decision-making of data, information, and knowledge reuse is limited by access to these archives, due to sheer size and inconvenient presentation. This paper presents an integrated solution that leverages two technologies CoMem (Corporate Memory) and iRoom (interactive Room) developed at Stanford. This addresses critical limitations, i.e., content, context, visualization and interactivity, constraining the process of collaborative exploration towards knowledge reuse and decision-making. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1952 ER - TY - CHAP A1 - Gabbert, U. A1 - Grochla, J. A1 - Köppe, H. T1 - Dynamic-explicit finite element simulation of complex problems in civil engineering by parallel computing N2 - The paper deals with the simulation of the non-linear and time dependent behaviour of complex structures in engineering. Such simulations have to provide high accuracy in the prediction of deformations and stability, by taking into account the long term influences of the non-linear behaviour of the material as well as the large deformation and contact conditions. The limiting factors of the computer simulation are the computer run time and the memory requirement during solving large scale problems. To overcome these problems we use a dynamic-explicit time integration procedure for the solution of the semi-discrete equations of motion, which is very suited for parallel processing. In the paper at first we give a brief review of the theoretical background of the mechanical modelling and the dynamic-explicit technique for the solution of the semi-discrete equations of motion. Then the concept of parallel processing will be discussed . A test example concludes the paper. KW - Tragwerk KW - Nichtlineares Phänomen KW - Zeitabhängigkeit KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4259 ER - TY - CHAP A1 - Garrett, James H. A1 - Akinci, Burcu A1 - Wang, Hongjun T1 - Towards Domain-Oriented Semi-Automated Model Matching for Supporting Data Exchange N2 - The process of matching data represented in two different data models is a longstanding issue in the exchange of data between different software systems. While the traditional manual matching approach cannot meet today’s demands on data exchange, research shows that a fully automated generic approach for model matching is not likely, and generic semi-automated approaches are not easy to implement. In this paper, we present an approach that focuses on matching data models in a specific domain. The approach combines a basic model matching approach and a version matching approach to deduce new matching rules to enable data transfer between two evolving data models. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1324 ER - TY - CHAP A1 - Garrett, James H. A1 - Sunkpho, J. T1 - Issues in delivering it systems to field users N2 - IT support for field personnel is starting to appear on bridge inspection sites, construction sites, and on the manufacturing floor. ENR magazine now regularly advertises palm computing-based systems for recording data on a construction site. This support can, and should, take on many forms and functions and needs to be carefully designed and evaluated like any other important tool used in the field. With careful design and implementation, IT devices for the field should have tremendous impact on the productivity of field personnel. If the devices are not carefully designed to take account of the field context and the abilities and preferences of the field personnel, field workers will not use these tools. KW - Informationssystem KW - Informationstechnik KW - Transportables Gerät Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5651 ER - TY - CHAP A1 - Gasser, Ingenuin T1 - On A New One-Dimensional Model to Describe Tunnel Fires N2 - We present a model derived to describe tunnel fires. The model originates in a compressible description of the air in the tunnel. It takes into account the strong buoyancy forces and at the same time the small Mach-number of the airflow. We comment on the derivation, on analytical results and on numerical simulations of the model. The model has been validated using data from real tunnel fire experiments. It shows good agreement with the real situation. KW - Tunnel KW - Brandgefahr KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2889 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Baumhauer, Andreas A1 - Ionita, Mihai T1 - Increasing the Reliability and Performance through Automatization and Parallel Working N2 - Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Parallelverarbeitung KW - Simulation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1397 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Pfeiffer, Eberhard A1 - Köhler, Anja T1 - Module für die multimediale netzbasierte Baustatik-Lehre N2 - In dem interdisziplinären und internationalen Verbundprojekt >2MN - Module für die multimediale netzbasierte Hochschullehre< werden diverse Lehr- und Lernmodule für ingenieur- und informationswissenschaftliche Studiengänge realisiert. Die benötigten Funktionalitäten für die Bereitstellung der verschiedenen Unterrichtsmaterialien sowie für Kommunikation, Betreuung der Kurse oder auch administrative Aufgaben im Netz werden von der in diesem Projekt entwickelten systemunabhängigen Lernplattform ELAT, der >Environment for Learning and Teaching<, zur Verfügung gestellt. Speziell für das Fachgebiet Baustatik werden vom Institut für Mechanik und Statik der Universität der Bundeswehr München einzelne Kapitel nach didaktischen Gesichtspunkten multimedial mit Text, Graphik, Bildern, Animationen und kurzen Videoclips zum systematisch angeleiteten Wissenserwerb aufbereitet. Interaktive Übungen geben Rückmeldung über den individuellen Lernfortschritt des Online-Studenten. Die Förderung der Eigeninitiative der Lernenden spielt dabei ebenso eine wichtige Rolle wie die Berücksichtigung nutzerspezifischer Lernpräferenzen. Einfach zu bedienende Statikprogramme wie der >Drehwinkeltrainer< sollen den angehenden Statikern als Kontroll- und Experimentierumgebung dienen. Das Online-Dictionary >Wörterbuch Bauwesen< erleichtert die Arbeit bei der Übersetzung baustatischer Fachtermini. Weitere Baustatik-Anwendungen, beispielsweise die Stabilitätsberechnung von Stabwerken, die Bestimmung von Querschnittswerten und die Berechnung von Biege- und Einflusslinien mit der Methode, können ortsunabhängig mit einem Pocket-PC genutzt werden. KW - Baustatik KW - Computerunterstützter Unterricht KW - Internet Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2892 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Pfeiffer, Eberhard A1 - Videkhina, Inna T1 - Modules for the education of civil engineers and the management of expert knowledge N2 - In the focus of the Bologna-contract of the European secretaries of education the universities are invited to aim a unification and comparability of certificates and to offer compatible and cooperative models of education. Among existing lectures in the Internet there will arise a new competition between the universities in netbased teaching and learning environments. For the use of distributed sources of information and for the possibility to generate free configurable sequences of education modules you need management systems which are able to handle different formats of documents and to assemble it to consistent and valid lessons. Beside elementar viewing-functions, fusion of information also administrative tasks are needed, e.g. automated efficiency controls, adaptive learning surroundings. This paper attends to three aspects: - netbased teaching and learning in the area of the instruction of civil engineers - netbased information assembling and fusion of knowledge bases to higher level documents - netbased learning with international coordinated projects KW - Bautechnik KW - Computerunterstütztes Lernen KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-918 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Pfeiffer, Eberhard A1 - Videkhina, Inna T1 - Calculation of beam structures with the symbolic computer language Maple N2 - Beside the standard calculation programs for civil engineering buildings mathematical programs have been lately established for the solution of differential equations for the analysis of mechanical and static systems. Programs like Maple, Matlab, MathCAD and Mathematica are popular in this field. To the knowledge of the authors, the widest application functionality offers the program Maple. Its advantages are, e.g. the alternatively symbolic or numerical solution of differential equation systems, the easy handling of parameter studies, the immediate visualization of results, the definition of macros for selected calculation steps and their export in other computer languages and, not least, the automatically generated, very clear documentation of the matehematical calculus. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Maple Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-845 ER - TY - CHAP A1 - González, Luis Felipe A1 - Donath, Dirk T1 - Integrated Planning Support System for Low-Income Housing N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< werden Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung entwickelt. Im Rahmen unseres Forschungsschwerpunkt zur digitalen Unterstützung der Planungsprozessen, das folgende Forschungsprojekt namens, >Integrated Planning Support System for Low-Income Housing< (IPSS) konzentriert sich auf die Entwicklung einer Sammlung von computergestützten Werkzeugen, um Benutzer-entworfene Wohnungen zu unterstützen, mittels der integrativen Kombinierung von Information Systems Leistungen, Computer Assisted Designwerkzeugen und online Kommunikationstechniken. Mit diesem Set von integrierten Planungswerkzeugen erwarten wir, Bewohnern von ressourcenmangelnden Gemeinden zu ermöglichen, ihre Wohnungen-Ausdehnung effizient zu planen. In diesem Sinne, ist es auch unser Ziel die räumliche, funktionale und vielleicht auch die konstruktive Qualität Benutzer-entworfener Wohnungen zu verbessern. KW - Benutzer / Beteiligung KW - Wohnung KW - Bauplanung KW - Benutzer-entworfene Wohnungen KW - Progressive Planung KW - Planungswerkzeugen Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2901 ER - TY - CHAP A1 - Gordienko, Boris I. A1 - Zhak, S. V. T1 - Die optimale Projektierung der metallverarbeitenden Betriebe N2 - Es wird das gemeine Schema der Projektierung, die die Analyse des Marktes einschließt, betrachtet, die Einschätzung der Nomenklatur und des Umfanges des Produktionsausstoßes der Erzeugnisse, und die Schlüsselaufgabe der Wahl der Regimes der Bearbeitung. Die letzte Aufgabe wird - konkretisiert es werden die Formeln berichtet und die Algorithmen der Optimierung nach den Kriterien der Produktivität und den Selbstkostenpreisen. Es sind die Formeln für die Produktivität der Systeme mit der flexiblen Verbindung, präzisiert sowie die Abhängigkeiten für die Standhaftigkeit bei den kleinen Geschwindigkeiten des Schneidens. Die Schlüsselwörter: der Markt, die Regimes der Bearbeitung, die Produktivität, der Selbstkostenpreis, die Optimierung KW - Metall verarbeitende Industrie KW - Produktionsplanung KW - Marketing KW - Optimierung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5832 ER - TY - CHAP A1 - Gordon, Chris A1 - Akinci, Burcu A1 - Garrett, James H. T1 - An Approach for Planning Sensor-Based Inspection of the Built Environment N2 - The promise of lower costs for sensors that can be used for construction inspection means that inspectors will continue to have new choices to consider in creating inspection plans. However, these emerging inspection methods can require different activities, resources, and decisions such that it can be difficult to compare the emerging methods with other methods that satisfy the same inspection needs. Furthermore, the context in which inspection is performed can significantly influence how well certain inspection methods are suited for a given set of goals for inspection. Context information, such as weather, security, and the regulatory environment, can be used to understand what information about a component should be collected and how an inspection should be performed. The research described in this paper is aimed at developing an approach for comparing and selecting inspection plans. This approach consists of (1) refinement of given goals for inspection, if necessary, in order to address any additional information needs due to a given context and in order to reach a level of detail that can be addressed by an inspection activity; (2) development of constraints to describe how an inspection should be achieved; (3) matching of goals to available inspection methods, and generation of activities and resource plans in order to address the goals; and (4) selection of an inspection plan from among the possible plans that have been identified. The authors illustrate this approach with observations made at a local construction site. KW - Monitorüberwachung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1500 ER - TY - CHAP A1 - Grabe, Waltraut von A1 - Tworuschka, Hartmut T1 - Ermittlung der Zuverlässigkeit von Stahlbetonbauteilen mit mehrdimensionalen physikalisch nichtlinearen FE-Modellen N2 - In dem vorliegenden Beitrag sind die Einsatzmöglichkeiten nichtlinearer Berechnungsverfahren aufgezeigt. Hierbei zeichnen sich mehrdimensionale Modelle auf Grundlage der Methode der Finiten Elemente durch die erzielbare Realitätsnähe aus. Für den Nachweis ausreichender Sicherheit in den Grenzzuständen der Trag- und Gebrauchstauglichkeit ist die Verbindung mit zuverlässigkeitstheoretischen Algorithmen dargestellt Hierbei wird die Grenzzustandsgleichung durch Ansatz eines als offene Schnittstelle konzipierten Algorithmus approximiert. Bei der Verknüpfung von nichtlinearen mechanischen Modellen und Zuverlässigkeitsanalysen wird das rechnerische Sicherheitsniveau wesentlich durch die statistischen Parameter der betrachteten Basisvariablen geprägt. Der Beitrag enthält Angaben für Verteilungsarten und -parameter für Nachweise im Stahlbetonbau KW - Bauteil KW - Stahlbeton KW - Zuverlässigkeit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4272 ER - TY - CHAP A1 - Grigrieva, Polina A1 - Lymarenko, Yulia T1 - Mathematical modeling of nonlinear effects for vibrodiagnostics of fatigue cracks N2 - The vibration control of complicated mechanical structures is impossible without proper mathematical models that allow to have a true apprehension of events occurring in structural member before the starting of the experiment and correct the diagnostic experiment in case of need. An approach that implies using of a discrete model reflecting all required features of a prototype system and permitting of an effective analytical and numerical investigation is proposed in the work. At first a discrete model of a bladed disk with flaw is considered. Taking into account the symmetry of the structure by utilization of mathematical tools of group presentation theory the number of degrees of freedom of the system is diminished. Small damage of the disk is regarded as perturbation of structure symmetry. The distinction of vibration characteristics such as natural frequencies and mode shapes of damaged and undamaged systems is determined theoretically with the help of perturbation theory and can be used as an effective diagnostic criterion of a small-scale damage of the structure. In the second part of the work a non-linear two-mass model of an acoustic emission in a damaged structure is proposed. On basis of the numerical integration of the nonlinear differential equations and expansion of the derived solution into a Fourier series free and forced vibrations of the model are investigated. It is shown that proposed model reflects all characteristic properties of vibrations of damaged structures: reduction of natural frequency, sub- and super-resonances, acoustic effects. KW - Nichtlineare Mechanik KW - Schwingung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2917 ER - TY - CHAP A1 - Grinewitschus, Viktor A1 - Hildebrand, R. A1 - Kemmerling, M. T1 - Gebäude-, Personen- und Datensicherheit in intelligenten Gebäudesystemen N2 - Bei der Kopplung unterschiedlicher Bussysteme oder der Anbindung von Geräten an externe Netzwerke (z.B. an das Internet) stellt sich oft heraus, dass für diesen Anwendungszweck grundlegende Sicherheitsmechanismen fehlen. Durch intelligente Zusatzkomponenten, z.B. Residential Gateways, können bestehende Netzwerke erfolgreich miteinander gekoppelt werden, auch wenn sie sehr unterschiedliche Eigenschaften aufweisen. Die erforderlichen Anpassungen, Dienstekonversionen und Protokollumsetzungen können in die Gateways integriert werden, so dass gewohnte Betriebsarten, besonders bei der Konfiguration oder der Diagnose, beibehalten werden können. Bei der Nutzung vorhandener Hausbus-Infrastrukturen für sicherheitsrelevante Zusatzfunktionen wie Zugangskontrollen, Zeiterfassungen oder Alarmanlagen hingegen stellt dieser Ansatz keine Lösung dar, da hier die Sicherheit innerhalb des Systems erhöht werden muss. Daher wird für solche sicherheitsrelevanten Anwendungen oft eine separate Kommunikationsinfrastruktur verwendet, obwohl ein Gebäudebus, z.B. ein EIB-System, zur Verfügung steht. Eine praktikable Lösung stellt hierbei die Verwendung der Standard-Übertragungsmechanismen des EIB dar, bei denen jedoch die eigentlichen Nettodaten verschlüsselt werden. Auf diese Weise kann normaler Datenverkehr mit gesichertem Datenverkehr gemischt werden, wobei natürlich die sicherheitsrelevanten Teilnehmer erweiterte Funktionalitäten wie Ver- und Entschlüsselung aufweisen müssen. Dem Residential Gateway kommt in solchen Systemen neben der Kopplung der internen Netzwerke und deren Anbindung an das Internet auch das intelligente Management der Schlüssel zu. ... KW - Gebäudeleittechnik KW - Lernendes System KW - Sicherheit Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2974 ER - TY - CHAP A1 - Grinewitschus, Viktor A1 - Klinger, Matthias A1 - Wittwer, Christof T1 - Intelligente Gebäudesysteme: eingebettete Intelligenz, Integration durch Vernetzung, neue Nutzeffekte durch Systemfunktionen N2 - In intelligente Gebäudesysteme wird Informationstechnik in systematisch geplanter Form eingesetzt, um die Eigenschaften von Gebäuden in den Bereichen Betriebskosten, Sicherheit und Flexibilität begl. der Nutzung zu verbessern. So müssen Gebäude während ihres Lebenszyklus Nutzer- und Nutzungsänderungen bewältigen. Dies gilt nicht nur für Zweckbauten, sondern auch für Wohngebäude, die früher auf den klassischen Familientyp (4-köpfige Familie) hin optimiert wurden. Heute ist mehr eine nutzungsneutrale, funktionsoptimierbare Gestaltung von Gebäuden gefordert. Die Kleinfamilie löst sich mehr und mehr zugunsten anderer Haushaltsformen auf, ein Gebäude soll auch für Single- oder Zweipersonenhaushalte gut geeignet sein, es soll eine optimale Verbindung von Wohnen und Arbeiten zulassen oder später älteren, pflegebedürftigen Personen ein möglichst langes selbstbestimmtes Leben ermöglichen. Das System intelligentes Gebäude besteht aus der Gebäudehülle und einer Kommunikations- und Informationsverarbeitungs-Infrastruktur, zu der alle im Gebäude eingebauten Geräte gehören, die zum Betrieb des Gebäudes erforderlich sind. Die Koordination der Funktion von Einzelkomponenten erfolgt dabei weniger durch den Nutzer, sondern durch eine spezielle Software, die auf die Knoten im System verteilt ist. Diese Architektur ist Grundlage der Verbesserung der Gebäudeeigenschaften in den genannten Bereichen, die möglichen Funktionen und die damit verbundene Flexibilität in der Nutzung wird mit dem Ausdruck Intelligenz des Gebäudes assoziiiert. Der Beitrag versucht zunächst, auf Basis der Konzepte und Erfahrungen des Innovationszentrums Intelligentes Haus Duisburg, kurz inHaus, und des vom Fraunhofer-Institut IMS seit 1993 gewonnenen einschlägigen Know-Hows einen Überblick über den aktuellen Entwicklungsstand bei Systemintegrations-Technologien und -funktionen für ganzheitliche, intelligente Haus- und Gebäudesysteme zu geben, insbesondere für den Bereich der integrierten Bedienung und der Nutzung der Internet-Anbindung KW - Gebäudeleittechnik KW - Intelligentes System Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-20 ER - TY - CHAP A1 - Gurtovy, O. G. A1 - Piskunov, V. G. T1 - HIGH-PRECISION MODELING AND FINITE-ELEMENT INVESTIGATION OF ELASTOPLASTIC DEFORMATION OF NON-ISOTROPIC THICK SANDWICH PLATES AND SHELLS N2 - There was suggested a phenomenological modified quadratic condition of the beginning of plasticity for plastic and quasifragile orthotropic materials. Limiting surface in the shape of a paraboloid with an axis bend over hydrostatic axis corresponds to the condition. The equations of theory of current with the isotropic and anisotropic hardenings, associated with the suggested yield condition, modified into the version of determining equations of strain theory of plasticity are received. These defining equations formed the basis of highlyprecise non-classic continual (along thickness) theory of non-linear deformation of thick sandwich plates and sloping shells. In the approximations along the cross coordinate the specificity of flexural and non-flexural deformations is taken into account. The necessity of introducing the approximations of higher order, as well as accounting for the cross compression while decreasing of the relatively cross normal and shear layer rigidness is shown. The specifications, obtained in comparison with the known physically nonlinear specified model of the bending of plates with orthotropic layers are distinguished. An effective procedure of linearization of the solving equations and getting the solutions in frames of the discrete-continual scheme of the finite-element method is suggested. The approximations of higher order let to model the appearance of the cracs of layers being split by the introducing of slightly hard thin layers into the finite element, not violating the idea of continuality of theory. Calculation of a threelayer plate with rigid face diaphragms on the contour is considered KW - Platte KW - Schale KW - Sandwichbauteil KW - Elastoplastizität KW - Finite-Elemente-Methode Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5848 ER - TY - CHAP A1 - Guskov, V. D. A1 - Kabanov, E. N. A1 - Rutman, Y. L. T1 - DEVICE FOR SEISMIC PROTECTION OF BUILDINGS N2 - Seismic insulation is one of the most progressive types of seismic protection. Seismic insulation is understood as applying special devices for reducing of inertial seismic loads acting on a building. The constructions, shown in article, significantly more effectively solve problems of seismic protection, comparing to the existing seismic insulation systems (SIS). The Special Mechanical Engineering Design Office has developed, manufactured and tested a shock-absorber unit (SAU) of large load capacity. The SAU represents a block of number of pneumatic shock-absorbers (PSA), concentrically mounted round the guiding cylinder. The protected object rests upon the upper movable part of the guiding cylinder of the SAU. In its turn, the lower part of the SAU is rested on the foundation plate, mounted on the ground. A set of the SAU is a constructive realization of the SIS. Efficiency of such SIS has been proved as theoretically, so experimentally An effective SIS can also be created on the base of the elasto-plastic shock-absorbers developed by the KBSM. New designing and constructional solutions are based on the use of the original SIS elements, performed on the base of long time existing (in the other field of technical equipment)units, safety and durability of which have been proved by long term service (more than 20 years). KW - Schwingungsdämpfer KW - Erdbebenschutz Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6247 ER - TY - CHAP A1 - Gürlebeck, Klaus A1 - Bock, Sebastian A1 - Falcao, M. Irene T1 - Applications of Bergman kernel functions N2 - In this paper we revisit the so-called Bergman kernel method (BKM) for solving conformal mapping problems. This method is based on the reproducing property of the Bergman kernel function. The main drawback of this well known technique is that it involves an orthonormalization process and thus is numerically unstable. This difficulty can be, in some cases, overcome by using the Maple system, which makes no use of numeric quadrature. We illustrate this implementation by presenting a numerical example. The construction of reproducing kernel functions is not restricted to real dimension 2. Results concerning the construction of Bergman kernel functions in closed form for special domains in the framework of hypercomplex function theory suggest that BKM can also be extended to mapping problems in higher dimensions, particularly 3-dimensional cases. We describe such a generalized BKM-approach and present numerical examples obtained by the use of specially developed software packages for quaternions. KW - Konforme Abbildung KW - Kernel Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2994 ER - TY - CHAP A1 - Haapalainen, Päivi A1 - Naaranoja, Marja A1 - Lonka, Heikki T1 - How to Prevent Project Knowledge Management Failures in Construction - IT Enabled Communication Perspective N2 - This article discusses how the failures of construction projects could be prevented. The focus is on using IT tools in communication. The article is based on the findings of the PROLABproject. The project seeks to find solutions for how the information can effectively be used in project management, specially in construction projects, what kind of procedures help the management of the knowledge and how the obstacles for efficient ways of administrating the information can be removed. These obstacles can be either related to use of new technology or to organization culture. The paper discusses e-mail as a medium of communication with the media richness framework (Fulk & Boyd 1991) based on the interviews done with the participants of construction projects. We found out that the emails were used in both rich way and not so rich way. Obstacles of rich use of IT communication were partly technical and partly psychological. Technology acceptance model (TAM) is used to study the actual use of emails in communication. Obstacles of the use of emails were mostly individual differences like the skills to use the system or external variables like they did not have proper software to open the attachments. Also people talked about information overload. Emails often push too much information. Keywords: IT tools, Communication, Knowledge management, Construction KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensmanagement KW - Konstruktionsfehler Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1977 ER - TY - CHAP A1 - Haase, Gundolf A1 - Langer, Ulrich A1 - Mühlhuber, Wolfram T1 - Optimal Sizing and Shape Optimization in Structural Mechanics N2 - We consider an industrial application consisting of the mass minimization of a frame in an injection moulding machine. This frame has to compensate the forces acting on the mould inside the machine and has to fulfill certain critical constraints. The deformation of that frame with constant thickness is described by the plain stress state equations for linear elasticity. If the thickness varies then we use a generalized plain stress state with constant thickness in the coarse grid elements. These direct problems are solved by an adaptive multigrid solver. The mass minimization problem leads to a constrained minimization problem for a non-linear functional which will be solved by some standard optimization algorithm which requires the gradients with respect to design parameters. For the shape optimization problem, we assume that the machine components consist of simple geometrical primitives determined by a few design parameters. Therefore, we calculate the gradient in the shape optimization by means of numerical differentiation which requires the solution of approximately 4 direct problems per design parameter. The adaptive solver guarantees the detection of critical regions automatically, and ensures a good approximation to the exact solution of the direct problem. This rather slow approach can be significantly accelerated by using the adjoint method to express the gradient. It will be combined with a direct implementation of several terms that appear after applying the chain rule to the gradient. KW - Baustatik KW - Tragwerk KW - Optimierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3005 ER - TY - CHAP A1 - Hahn, Stephan A1 - Weitzmann, Rüdiger T1 - Nichtlineare Analyse von hybriden Konstruktionen unter Verwendung von selektiv gekoppelten Tragwerks- und Querschnittsmodellen N2 - Bei der Untersuchung hybrider Strukturen kann eine Kopplung von Modellen unterschiedlicher Modellebenen vorteilhaft sein. Durch selektive Kopplung von Tragwerks- und Querschnittsmodellen in ausgewählten Bereichen der Konstruktion kann z.B. eine Verbesserung der Abbildungsgenauigkeit erzielt werden. Dadurch werden erweiterte Aussagen über das Querschnittstragverhalten in extrem beanspruchten Teilen des Tragwerks bei optionaler Skalierbarkeit des Modellumfangs möglich. Im Beitrag werden ausgewählte Varianten der Modellbildung gegenübergestellt und bewertet. Hierbei werden Aspekte der physikalischen Nichtlinearität von hybriden Konstruktionen insbesondere von Stahlbetonkonstruktionen berücksichtigt. Die Einbeziehung von Verfahren der mathematischen Optimierung in die Berechnungsstrategie ermöglicht die Lösung der zugrunde liegenden nichtlinearen Problemstellungen unter Vorgabe von Bemessungszielen und unter Beachtung von Grenzzustandsbedingungen. KW - Tragwerk KW - Stahlbeton KW - Modellierung KW - Bewertungssystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3026 ER - TY - CHAP A1 - Halfmann, Ansgar A1 - Rank, Ernst A1 - Glück, M. A1 - Breuer, M. A1 - Durst, F. T1 - A partitioned solution approach for the fluid-structure interaction of wind and thin-walled structures N2 - In many engineering applications two or more different interacting systems require the numer-ical solution of so-called multifield problems. In civil engineering the interaction of fluid and structures plays an important role, i.e. for fabric tensile structures of light and flexible materials often used for large roof systems, capacious umbrellas or canopies. Whereas powerful numerical simulation techniques have been established in structural engineering as well as in fluid mechan-ics, only relatively few approaches to simulate the interaction of fluids with civil engineering constructions have been presented. To determine the wind loads on complex structures, it is still state-of-the-art to apply semi-empirical, strongly simplifying methods or to perform expensive ex-periments in wind tunnels. In this paper an approach of a coupled fluid-structure simulation will be presented for membrane and thin shell structures. The interaction is described by the struc-tural deformation as response to wind forces, resulting in a modification of the fluid flow domain. Besides a realistic determination of the wind loads, information on the structural stability can be obtained. The so-called partitioned solution is based on an iterative frame algorithm, integrating different codes for Computational Fluid Dynamics (CFD) and for Computational Structural Dy-namics (CSD) in an explicit or an implicit time-stepping procedure. All data exchange between the two different applications is performed via a neutral geometric model provided by a coupling interface. A conservative interpolation method is used for the interpolation of the nodal loads. The time-dependent motion of the structure requires a dynamic modification of the different grids and a redefinition of the Navier-Stokes equations in an Arbitrary Langrangian Eulerian (ALE) formulation. As an example for the present implementation, results of a coupled fluid-structure simulation for a textile membrane canopy will be presented. KW - Tragwerk KW - Dünnwandiges Bauelement KW - Windlast KW - Flüssigkeit-Bauwerk-Wechselwirkung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5858 ER -